Search Results

Search found 6065 results on 243 pages for 'usb modeswitch'.

Page 121/243 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

  • How to use bluetooth keyboard with both Android and WIndows 8?

    - by mathStudent
    I purchased this Logitech bluetooth keyboard which, according to the specifications on the page, can switch between both Android and Windows 8 devices. I haven't figured out how to do this. Is a specific type of bluetooth USB adapter required? And even assuming I had the necessary USB adapter, what commands must be executed (on the keyboard, Android, or Windows 8 machines) for the bluetooth keyboard to switch between devices?

    Read the article

  • permission not to change on eth0 file?

    - by user133916
    I am logged in as a root user i want to edit my /etc/sysconfig/network-scripts/ifcfg-eth0 file when i edit this showing -- INSERT -- W10: Warning: Changing a readonly file while i have logged in as root user my mount showing [root@s1202 ~]# mount rootfs on / type rootfs (rw) /dev/root on / type ext3 (ro,data=ordered) /dev on /dev type tmpfs (rw) /proc on /proc type proc (rw) /sys on /sys type sysfs (rw) /proc/bus/usb on /proc/bus/usb type usbfs (rw)

    Read the article

  • Installing Windows 8 on SSD

    - by StoneFX
    I'm trying to install Windows 8 (CP) on a 2nd SSD that I have (the 1st SSD has Windows 7). I boot into the installation from a usb stick, select the SSD, and launch the installation. When the computer goes to reboot during the install process, it keeps going back into the usb stick or my Windows 7 installation. It never recognizes the installation on the 2nd SSD. Is there something I'm doing wrong?

    Read the article

  • "this device cannot start error code 10" ?

    - by Neo
    I am trying to install GPS driver for gmm-u1lp.I think which is just a virtual com port driver. It just contains following INF file: [Version] Signature="$Windows NT$" Class=Ports ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} Provider=%MTK% ;LayoutFile=layout.inf DriverVer=06/12/2007,1.0.0.1 [Manufacturer] %MTK%=MTK [MTK] %MTK3329%=Reader,USB\Vid_0e8d&Pid_3329 [Reader_Install.NTx86] ;Windows2000 [DestinationDirs] DefaultDestDir=12 Reader.NT.Copy=12 [Reader.NT] Include=mdmcpq.inf CopyFiles=FakeModemCopyFileSection AddReg=Reader.NT.AddReg [Reader.NT.AddReg] HKR,,DevLoader,,*ntkern HKR,,NTMPDriver,,usbser.sys HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" [Reader.NT.Services] AddService = usbser, 0x00000002, Service_Inst [Service_Inst] DisplayName = %Serial.SvcDesc% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\usbser.sys LoadOrderGroup = Base [Strings] MTK = "Media Tek Inc." MTK3329 = "GPS USB Serial Interface Driver" Serial.SvcDesc = "GPS USB Serial Interface Driver" After installing this Inf,device details shows:"device cannot start error code 10". What is the exact problem? Do I need to test this after connecting the Device?

    Read the article

  • 2 fundamental questions for the Androgurus ...Can someone guide me

    - by Saul Carpenter
    I have'nt plunged into Android Development as yet though Java Classes C++ all that is not new to me. Here are the questions folks. Appreciated any help on these : - If I need to develop test and deploy Android Apps do I NEED AN ANDROID Hardware device or is there a software Android Simulator like VMWARE or Virtual PC , where I can emulate the results.If there is such can you point me more info I have a Netbook ( the Chinese Ipad Clone ) running Android that has only Wi-Fi for the present. Is it possible to add the following features via the spare USB Port --- a USB Based 56K Modem : Are there Android platform H/W Drivers. --- a USB based RJ45 ( Ethernet LAN LandLine connection ) Adapter :Are there Android platform H/W Drivers. Please advise Thanks Saul

    Read the article

  • Debugging android application on HTC Hero

    - by w00tfest99
    Is it possible to connect the ADB with an HTC Hero? I tried following the instructions for the Win USB driver but when I try to install the driver I just get a generic message saying that there was a problem installing the driver. Looking at the supported devices, the HTC Hero isn't listed. Is this even possible? As a note, I've tried removing drivers and then re-adding using USBDeview and I've also tried adding in the line ";HTC Hero %USB\VID_0BB4&PID_0FFE.DeviceDescRelease%=androidusb.Dev, USB\Vid_0bb4&Pid_0ffe&Rev_0100" in the inf file for the driver.

    Read the article

  • Abort a slow flush to disk after write?

    - by Therealstubot
    Is there a way to abort a python write operation in such a way that the OS doesn't feel it's necessary to flush the unwritten data to the disc? I'm writing data to a USB device, typically many megabytes. I'm using 4096 bytes as my block size on the write, but it appears that Linux caches up a bunch of data early on, and write it out to the USB device slowly. If at some point during the write, my user decides to cancel, I want the app to just stop writing immediately. I can see that there's a delay between when the data stops flowing from the application, and the USB activity light stops blinking. Several seconds, up to about 10 seconds typically. I find that the app is holding in the close() method, I'm assuming, waiting for the OS to finish writing the buffered data. I call flush() after every write, but that doesn't appear to have any impact on the delay. I've scoured the python docs for an answer but have found nothing.

    Read the article

  • A peculiar problem

    - by rajivpradeep
    I have an application on a pen drive, which executes some flash files on the same USB flash drive. when i run the application with in the drive, the application just keeps running in the back ground without running the flash files. When i copy the application on desktop, it runs the flash files in the USB. Also i programmed the app to write log file, when i run the application with in USB, the app is running but the log file is not getting written, when i remove the pen drive, the file gets written. What might be the problem, I am using VC++ , VS 2008 to build the application.

    Read the article

  • How do I add "Press any key to boot from usb" when installing Windows from a flash drive? (Grub4dos question / how to remove a bootloader)

    - by Vincent
    Hi there! I've been struggling with this problem for a while now and finially decided to ask for help. Let me first explain what the main purpose of the app is: to provide the a very easy to use way of backing up files, after which I format the drive and start Windows 7 setup. I do this by booting WinPE, which runs a script to detect Windows installations and then opens a file browser. After the file browser is closed, the script continues and formats the drive that contains the Windows installation, and starts an unattended Windows 7 install. Now here is the problem: When you start Windows setup or WinPE from a dvd, you get a nice option to "Press any key to boot from DVD". This is to prevent the computer from booting the DVD when the first phase of the installation is complete and the computer reboots. However, when booting from a flash drive, Windows does not provide this option: it simply boots the flash drive every reboot. To replicate the "press any key" function, I installed Grub4Dos, which works great. It provides a small menu, the first standard item being "Continue installation", the second being "start installation". After quite a lot of tweaking, I got everything working: Start installation starts WinPE, which in turn starts the Windows installation. At first reboot, the Grub4Dos menu comes up, counts 5 seconds and boots the second stage of the installation. Here, I am greeted with the error: "Windows setup could not configure windows to run on this computer's hardware." When I boot into WinPE the normal way (put the bootmgr on the stick root) and change my bios to boot from the primary hdd after first reboot, I don't get this error. I've been looking around, and the only thing I could find was that the BIOS automatically names the boot device hd0, and that Windows can only be run / installed to hd 0. I'm not sure if this is the problem. I read about remapping to solve this problem, but to do that you have to know the phisical location of the hard drive and partition, like hd(0,1). I want this flash drive to work on any PC, regardless of where the OS is installed, so that's not really a possibility. A possible fix I thought of is removing the bootloader from the flash drive when I'm in WinPE. That way, when the pc reboots the BIOS will not see the flash drive as a boot drive and instead boot the primary hdd. I have yet to find a way to do this. Thank you for reading my question, and if you have any suggestion, please do.

    Read the article

  • PHP or JS to connect with fingerprint scanner save to database

    - by narong
    I have a project to set profile user and save all data to database include fingerprint also. i don't what i should start, I have USB finger scanner already to test. What i think: i should have a input box to read data from USB finger scanner than i should create a function to upload it database. but with this thinking i meet problem: i don't know data that get from USB finger scanner is image or data? if image, how i can read it to input box to save to database ? Anyone have any idea, please share me to resolve it. I am looking to see your helping soon! thanks

    Read the article

  • WMI instrinsic events. Resources

    - by Nickolodeon
    Hi. I subscribe to usb inserted event like this select * FROM __INSTANCECREATIONEVENT WITHIN 3 WHERE TARGETINSTANCE ISA Win32_DiskDrive After inserting usb flash it blinks every 3 seconds. This is polling interval and intrinsic events work by polling object that's in query. Now, we know these types of events may be resource expensive. (Putting value greater then 3 sometimes chokes these events and client program doesn't get notified). Are there other ways to do that, so that usb doesn't get scanned all the time? May be there some extrinsic events available? Right now the only solution I see is to unsubscribe from event above once it trigerred and resubscribe to it in __INSTANCEDELETIONEVENT handler. Hm, althought deletionevent will also poll diskdrive controllers(

    Read the article

  • How to change a remote repository URI using Git?

    - by e-satis
    I have a repo (origin) on an USB key that I cloned on my hardrive (local). I moved "origin" to a NAS and I successfully tested cloning it from here. I would like to know if I can change the uri of "origin" in the settings of "local" so it now pull from the NAS, and not from the USB key. For now, I can see two solutions : - pushing everything to the usb-orign, and copy it to the NAS again (implies a lot of work due to new commits to nas-origin); - adding a new remote to "local" and delete the old one (i fear I'll break my historic).

    Read the article

  • Configuring Novel iPrint client on ubuntu 13.10

    - by Mahdi Sadeghi
    Recently I have struggled a lot to make Novel iPrint client to work on my laptop. I need it to use Follow Me printers in our university(you can take your print form any printer). Using this tutorial from Novel, I tried to convert the rpm package and install it on Ubuntu 13.04 & 13.10. The post install script from installing generated deb package had a typo which I saw in post install messages and I fixed that. Now I have the client running. To see the client UI I installed cinnamon desktop(because unity does not have system tray and old solutions did'nt work to whitelist Novel clinet). I have iPrint plugin installed on firefox as well(I copied the shared object files to plugin directories). I try installing printers from provided ipp URL(which lists available printers on the server) with no success. After clicking the printer name I see this: I have various errors: Formerly firefox used to asked my network username/password for installing SSL printer but now it returns this: iPrint Printer - The printer is currently not available. However I can install non-SSL version but the printer location is either empty or points to: file:///dev/null even if I change it to the exact address which I see on working machines still it prints nothing. I have tried the novel command line tool, iprntcmd to print. It is being installed at: /opt/novell/iprint/bin/ msadeghi@werkstatt:/opt/novell/iprint/bin$ ./iprntcmd --addprinter ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me\ -\ IPP iprntcmd v05.04.00 Adding printer ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me - IPP. Added printer ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me - IPP successfully. It adds the printer with empty location and again no print. What I found interesting is the log file at ~/.iprint/errors.txt with strange errors which I hope somebody here can understand. When I try to install the SSL printer I receive these logs(note that HP is my local printer and has nothing to do with iprint): Thu Oct 31 11:02:03 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:03 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:05 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:05 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:06 2013 Trace Info: mydoreq.c, line 676 Group Info: CLIB Error Code: 0 (0x0) User ID: 1000 Error Msg: Success Debug Msg: MyCupsDoFileRequest - httpReconnect failed (0) Thu Oct 31 11:02:06 2013 Trace Info: mydoreq.c, line 1293 Group Info: CUPS-IPP Error Code: 1282 (0x502) User ID: 1000 Error Msg: iPrint Printer - The printer is currently not available. Debug Msg: MyCupsDoFileRequest - IPP SERVICE UNAVAILABLE Thu Oct 31 11:02:06 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:06 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:08 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:08 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified I should say that my friend can print using the same instructions on CrunchBang easily and another guy on 12.04 LTS but with more struggling. It worked for me on linux mint maya with my old laptop as well. Is there anybody out there who can help me to solve these problems? I am really disappointed with Novell and our university support. PS. I had the same problemwith 13.04. No matter if I am within the network or I connect with VPN, I have the same issues.

    Read the article

  • Broadband wireless drivers don't work

    - by user88235
    I have a Dell Latitude E6520 which is a Ubuntu 12.04 certified hardware. However the driver assigned to the Dell Wireless 5630 (EVDO-HSPA) Mobile Broadband Mini-Card doesn't seem to work. When I boot in Windows 7 I connect to Verizon dialing *99# with no username or password but it won't connect using Ubuntu. The windows drivers are from Novatel Wireless Inc 1.0.0.6 if that helps. This is also an internal card not USB and the hardware Id is USB\VID_413C&PID_8194&REV_0002&MI_00 If anyone can help me with obtaining the correct driver or maybe some other way of getting it to work I would be very grateful. My job requires traveling and I need internet access but hate using Win7.

    Read the article

  • Installation after boot shows no display

    - by matthias
    I just booted 12.04 for installation from USB-stick. But there is a problem with the display. After boot I see a rectangle on the lower left corner of the screen, after a while I see "Ubuntu 12.04 ..." loading from USB-Stick, the Ubuntu-Desktop starts fine, clicking on Ubuntu-Install seems to work ... till identification, then Installation-window closed and ... nothing more happens. So I want to try Installation direct from the Menu at the beginning - before Ubuntu-12.04-loading. Butt I cannot see any menus at that time. I think there is an graphic-problem? How can I get the installation by menus, how would the Installation via Desktop going to work? Bye Matthias

    Read the article

  • How do I know if I am running Wubi or a proper dual-boot?

    - by Don
    I tried to setup a "proper" Windows/Ubuntu dual-boot system, by installing Ubuntu from a USB key. However, I simply could not get the laptop to boot off the USB despite the fact that I made the appropriate changes to the boot device order in the BIOS. So I then turned to Wubi, and (to cut a long story short) it seems I now have a proper dual-boot setup, because I don't need to launch Ubuntu from windows. When I start the laptop, I get that screen that asks me whether I want to run Windows or Ubuntu. However, I'm still not sure if this is a proper dual-boot setup, because when I run windows, it seems that my C: and D: drives are still the same size. If it was a proper dual boot I'd expect separate partitions to have been created for Ubuntu which would have removed some space from the C: and D: drive sizes displayed in Windows. Is there some way that I can confirm whether I'm running a proper dual-boot, and if not, is there some process for converting a Wubi installation to a proper dual-boot?

    Read the article

  • Sun Ray 3 Plus Appliance Announced

    - by [email protected]
    There were many of you out there wondering if Oracle was going to keep and add to the Sun Ray and Sun virtualized desktop product suite, there have been a number of affirmative statements over the last many months. However, none of them resound like this; the introduction of a new product pretty much proves the point. A couple minutes before 3:00, local time yesterday, Oracle announced the release of a new Sun Ray, appliance, the Sun Ray 3 Plus. This is the unit that will replace the SR 2 FS (which has been for sale now since the middle of last decade).  Physically it is about the same size as the 2 FS but there are some significant differences... As you can see there is no smart card reader in the front - that has moved to the top to ensure only one hand is required to insert the card.  There is also a larger surround on the card reader that lights up to show the user the card is being read (properly).  A new power on/off switch is on the front which essentially brings power consumption to ~0 watts, but there is also a new 'sleep' timer looking for 30 minutes of inactivity and then will drop the power consumption down to ~ 1watt. There are also 2 USB 2.0 ports are accessible on the front instead of one.  The standard mic in and headphone out ports are there as well.  There is even more interesting stuff on the back. From the top down there are two more USB 2.0 ports for a total of four, but then the Oracle "Peripheral Kit" keyboard includes a 3-port USB Hub, too.  There's a 10/100/1000 Ethernet port as well as a 1000 Mb SFP port.  Standard DB-9 Serial port and then two DVI ports.  Then there is the really big news.  Two DVI ports driving 2560 x 1600 resolution, each. Most PCs can't do that without adding an adapter card.Now the images I have here are ones taken on a prototype a couple months back.  They are essentially the same as the Production unit, but if you would like to see an image of the Production Sun Ray 3 Plus unit you can see one here. There is a full data sheet available here. So this is the first Oracle Sun Ray desktop appliance.  Proof that the product line lives on.  A very good start!

    Read the article

  • Graphical Error During Installation of Ubuntu 13.10 32bit

    - by user172353
    In trying to install the latest version of Ubuntu, I made a bootable USB and proceeded to give it a shot. As it loaded, the upper half of the screen displayed staticy, multi-colored horizontal lines, but continued to boot into the installer. The installer appeared to be functional using the keyboard, but I was unable to proceed as the graphical display was a mismatched mosaic of the proper screen with no visible cursor. I'll try to edit in a photo later. Attempting the exact same USB on a different device (an old Asus Eee 1005HA) gave no such error and installed without a hitch.

    Read the article

  • Restore Your PC from Windows Home Server

    - by Mysticgeek
    If your computer crashes or you get a virus infection that makes it unrecoverable, doing a clean install can be a hassle, let alone getting your data back. If you’re backing up your computers to Windows Home Server, you can completely restore them to the last successful backup. Note: For this process to work you need to verify the PC you want to restore is connected to your network via Ethernet. If you have it connected wirelessly it won’t work. Restore a PC from Windows Home Server On the computer you want to restore, pop in the Windows Home Server Home Computer Restore disc and boot from it. If you don’t have one already made, you can easily make one following these instructions. We have also included the link to the restore disc below. Boot from the CD then select if your machine has 512MB or RAM or more. The disc will initialize… Then choose your language and keyboard settings. Hopefully if everything goes correctly, your network card will be detected and you can continue. However, if it doesn’t like in our example, click on the Show Details button. In the Detect Hardware screen click on the Install Drivers button. Now you will need to have a USB flash drive with the correct drivers on it. It has to be a flash drive or a floppy (if you happen to still have one of those) because you can’t take out the Restore CD. If you want to make sure you have the correct drivers on the USB flash drive, open the Windows Home Server Console on another computer on your network. In the Computers and Backup section right-click on the computer you want to restore and select View Backups. Select the backup you want to restore from and click the Open button in the Restore or view Files section. Now drag the entire contents of the folder named Windows Home Server Drivers for Restore to the USB flash drive. Back to the machine you’re trying to restore, insert the USB flash drive with the correct drivers and click the Scan button. Wait a few moments while the drivers are found then click Ok then Continue.   The Restore Computer Wizard starts up… Enter in your home server password and click Next. Select the computer you want to restore. If it isn’t selected by default you can pull it up from the dropdown list under Another Computer. Make certain you’re selecting the correct machine. Now select the backup you want to restore. In this example we only have one but chances are you’ll have several. If you have several backups to choose from, you might want to check out the details for them. Now you can select the disk from backup and and restore it to the destination volume. You might need to initialize a disk, change a drive letter, or other disk management tasks, if so, then click on Run Disk Manger. For example we want to change the destination drive letter to (C:).   After you’ve made all the changes to the destination disk you can continue with the restore process. If everything looks correct, confirm the restore configuration. If you need to make any changes at this point, you can still go back and make them. Now Windows Home Server will restore your drive. The amount of time it takes will vary depend on the amount of data you have to restore, network connection speed, and hardware. You are notified when the restore successfully completes. Click Finish and the PC will reboot and be restored and should be working correctly. All the updates, programs, and files will be back that were saved to the last successful backup. Anything you might have installed after that backup will be gone. If you have your computers set to backup every night, then hopefully it won’t be a big issue.   Conclusion Backing up the computers on your network to Windows Home Server is a valuable tool in your backup strategy. Sometimes you may only need to restore a couple files and we’ve covered how to restore them from backups on WHS and that works really well. If the unthinkable happens and you need to restore the entire computer, WHS makes that easy too.  Download Windows Home Server Home Computer Restore CD Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscGMedia Blog: Setting Up a Windows Home ServerShare Ubuntu Home Directories using SambaInstalling Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

    Read the article

  • An increase to 3 Gig of RAM slows down Ubuntu 10.04 LTS

    - by williepabon
    I have Ubuntu 10.04 running from an external hard drive (installed on an enclosure) connected via USB port. Like a month or so ago, I increased RAM on my pc from 2 Gigs to 3 Gigs. This resulted on extremely long boot times and slow application loads. While I was understanding the nature of my problem, I posted various threads on this forum ( Questions # 188417, 188801), where I was advised to gather speed tests, and other info on my machine. I was also suggested that I might have problems with the RAM installed. Initially, I did not consider that possibility because: 1) I did a memory test with a diagnostic program from DELL (My pc is from Dell) 2) My pc works fine with Windows XP (the default OS), no problems with memory 3) My pc works fine when booting with Ubuntu 10.10 memory stick, no speed problems 4) My pc works fine when booting with Ubuntu 11.10 memory stick, no speed problems Anyway, I performed the memory tests suggested. But before doing it, and to check out any possibility of hardware issues on the hard drive, I did the following: (1) purchased a new hard drive enclosure and moved my hard drive to it, (2) purchased a new USB cable and used it to connect my hard drive/enclosure setup to a different USB port on my pc. Then, I performed speed tests with 1 Gig, 2 Gigs and 3 Gigs of RAM with my Ubuntu 10.04 OS. Ubuntu 10.04 worked well when booted with 1 Gig or 2 Gigs of RAM. When I increased to 3 Gigs, it slowed down to a crawl. I can't understand the relationship between an increase of 1 Gig and the effect it has in Ubuntu 10.04. This doesn't happen with Ubuntu 10.10 and 11.10. Unfortunately for me, Ubuntu 10.04 is my principal work operating system. So, I need a solution for this. Hardware and system information: DELL Precision 670 2 internal SATA Hard drives Audigy 2 ZS audio system Factory OS: Windows XP Professional SP3 NVidia 8400 GTS video card More info: williepabon@WP-WrkStation:~$ uname -a Linux WP-WrkStation 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 i686 GNU/Linux williepabon@WP-WrkStation:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.4 LTS Release: 10.04 Codename: lucid Speed test with the 3 Gigs of RAM installed: williepabon@WP-WrkStation:~$ sudo hdparm -tT /dev/sdc [sudo] password for williepabon: /dev/sdc: Timing cached reads: 84 MB in 2.00 seconds = 41.96 MB/sec Timing buffered disk reads: 4 MB in 3.81 seconds = 1.05 MB/sec This is a very slow transfer rate from a hard drive. I will really appreciate a solution or a work around for this problem. I know that that there are users that have Ubuntu 10.04 with 3 Gigs or more of RAM and they don't have this problem. Same question asked on Launchpad for reference.

    Read the article

  • How to connect two monitors to a macbook pro? [closed]

    - by CIRK
    I have a 13" macbook pro, and I need much more space right now, so I decided to buy two smaller monitors. (these from LG). But I don't really know how will I connect them. I've seen some products like this Diamond BVU195, but it's not currently in stores in my country. I've found these Equip 128450 USB 2.0 Display Adapter DELOCK USB 2.0 to DVI/VGA/HDMI Adapter The second one looks pretty cool, but it says that Windows is a system requirement or what, so I'm not sure if it will work with mac os x? So how did you connected multiple monitors to you mac, and are these adapters the best choices, if yes then is there an OS independent one?

    Read the article

  • How to use gps receiver bu-353

    - by Parimal
    Hi I have a gps receiver bu-353 with usb interface i want to know how can i use it under ubuntu I ran the following command gpsd -n -N -D 2 /dev/ttyUSB0 I got the output as: gpsd: launching (Version 2.94) gpsd: listening on port gpsd gpsd: running with effective group ID 1000 gpsd: running with effective user ID 1000 gpsd: opening GPS data source type 3 at '/dev/ttyUSB0' gpsd: speed 38400, 8N1 gpsd: Garmin: garmin_gps Linux USB module not active. gpsd: speed 9600, 8O1 gpsd: speed 38400, 8N1 gpsd: gpsd_activate(): opened GPS (fd 6) gpsd: speed 4800, 8N1 gpsd: NTPD ntpd_link_activate: 0 gpsd: /dev/ttyUSB0 identified as type SiRF binary (2.687608 sec @ 4800bps) gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client after this i started tangoGPS, which said no gps and no gpsd found

    Read the article

  • How do I use with LTSP with a Dell FX170 thin client?

    - by v4169sgr
    Just got a reconditioned DELL Optiplex FX170 thin client delivered, without an image. On power-up, I see the message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER I am very sure all the wires etc are connected properly. I would like it to PXE boot and find my LTSP installation. I have an HP T5525 with the same connectivity that works fine. On F12 there's a BIOS boot order menu. The only options available though are LS120, the HDD, CD / DVD [via USB presumably], and various USB options. I do not see 'PXE' or any network card. And I don't know how to change the boot order :( Any help appreciated!

    Read the article

  • how to use gps receiver bu-353 in ubuntu 10.10

    - by Parimal
    Hi I have a gps receiver bu-353 with usb interface i want to know how can i use it under ubuntu I ran the following command gpsd -n -N -D 2 /dev/ttyUSB0 i got the output as: gpsd: launching (Version 2.94) gpsd: listening on port gpsd gpsd: running with effective group ID 1000 gpsd: running with effective user ID 1000 gpsd: opening GPS data source type 3 at '/dev/ttyUSB0' gpsd: speed 38400, 8N1 gpsd: Garmin: garmin_gps Linux USB module not active. gpsd: speed 9600, 8O1 gpsd: speed 38400, 8N1 gpsd: gpsd_activate(): opened GPS (fd 6) gpsd: speed 4800, 8N1 gpsd: NTPD ntpd_link_activate: 0 gpsd: /dev/ttyUSB0 identified as type SiRF binary (2.687608 sec @ 4800bps) gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client after this i started tangoGPS, which said no gps and no gpsd found

    Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >