Search Results

Search found 6065 results on 243 pages for 'usb modeswitch'.

Page 122/243 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

  • Digital Storage for Airline Entertainment

    - by Bill Evjen
    by Thomas Coughlin Common flash memory cards The most common flash memory products currently in use are SD cards and derivative products (e.g. mini and micro-SD cards) Some compact flash used for professional applications (such as DSLR cameras) Evolution of leading flash formats Standardization –> market expansion Market expansion –> volume iNAND –> focus is on enabling embedded X3 iSSD –> ideal for thin form factor devices Flash memory applications Phones are the #1 user of flash memory Flash memory is used as embedded and removable storage in many mobile applications Flash memory is being used in computers as USB sticks and SSDs Possible use of flash memory in computer combined with HDDs (hybrid HDDs and paired or dual storage computers) It can be a removable card or an embedded card These devices can only handle a specific number of writes Flash memory reads considerably quicker than hard drives Hybrid and dual storage in computers SSDs can provide fast performance but they are expensive HDDs can provide cheap storage but they are relatively slow Combining some flash memory with a HDD can provide costs close to those of HDDs and performance close to flash memory Seagate Momentus XT hybrid HDD Various dual storage offerings putting flash memory with HDDs Other common flash memory devices USB sticks All forms and colors Used for moving files around Some sold with content on them (Sony Movies on USB sticks) Solid State Drives (SSDs) Floating Gate Flash Memory Cell When a bit is programmed, electrons are stored upon the floating gate This has the effect of offsetting the charge on the control gate of the transistor If there is no charge upon the floating gate, then the control gate’s charge determines whether or not a current flows through the channel A strong charge on the control gate assumes that no current flows. A weak charge will allow a strong current to flow through. Similar to HDDs, flash memory must provide: Bit error correction Bad block management NAND and NOR memories are treated differently when it comes to managing wear In many NOR-based systems no management is used at all, since the NOR is simply used to store code, and data is stored in other devices. In this case, it would take a near-infinite amount of time for wear to become an issue since the only time the chip would see an erase/write cycle is when the code in the system is being upgraded, which rarely if ever happens over the life of a typical system. NAND is usually found in very different application than is NOR Flash memory wears out This is expected to get worse over time Retention: Disappearing data Bits fade away Retention decreases with increasing read/writes Bits may change when adjacent bits are read Time and traffic are concerns Controllers typically groom read disturb errors Like DRAM refresh Increases erase/write frequency Application characteristics Music – reads high / writes very low Video – r high / writes very low Internet Cache – r high / writes low On airplanes Many consumers now have their own content viewing devices – do they need the airlines? Is there a way to offer more to consumers, especially with their own viewers Additional special content tie into airplane network access to electrical power, internet Should there be fixed embedded or removable storage for on-board airline entertainment? Is there a way to leverage personal and airline viewers and content in new and entertaining ways?

    Read the article

  • Strategy for using snapshots to back up Ubuntu Linux server?

    - by MountainX
    I need some backup advice for my home file server. Here are the mount points, volume groups, logical volumes and used/total space of all the volumes on my Ubuntu 8.10 home file server. / vgA/lvRoot [7.5G/50G] /tmp vgB/lvTmp [195M/30G] /var vgB/lvVar [780M/30G] swap vgB/lvSwap [16.00 GB] /media1 vgC/lvMedia1 [400G/975G] /media2 vgC/lvMedia2 [75G/295G] /boot partition (no volume group) [95M/200M] /video partition (no volume group) [450G/950G] /backups vgD/lvBackupTarget [800G/925G] /home vgE/lvHome [85G/200G] I have just added a 2.0 TB external USB drive that I would like to use to backup everything. (It will be a close fit to get it all on one 2.0 TB drive. I actually have a 2nd external USB drive if needed.) I'd like to backup "/", var, /media1, media2 and /home. I'll deal with /boot and /video separately since they are not logical volumes. For all the logical volumes I'm anticipating taking snapshots and then copying those snapshots to the 2.0 TB external USB drive. I have never done a task like that before. If I do that, I could use the tutorial I found here: http://www.howtoforge.com/linux_lvm_snapshots My questions are: What is the best overall strategy? Is it LVM snapshots, as I'm assuming? How should I prepare, subdivide and mount the 2.0 TB external USB drive? 2.a. Should I create one or more regular partitions or should I create a physical volume with one or more logical volumes? 2.b. Would it be advisable to extactly mirror the source pv/lv layout on the external drive, and if so, is this a good strategy? What's the best way to get the snapshots onto the external drive? dd? Even though this is a strategy question, feedback with actual commands is appreciated. I need step-by-step cookbook-style help because I don't do much server admin work. (Background: This is a home file server that I have rarely had to touch in about 2 years. It has done its job without much intervention. The really old PC that I used to back everything up recently failed, so I'm replacing that with the external USB drive(s) and I'd like to upgrade my backup strategy at the same time. Previously, I just copied stuff from /backups over to the other computer and that would not have made things very easy in a real restore situation. The /backups mount point contains backup copies of "most" of the important data on a file by file basis, but it does not contain copies of /boot, etc. BTW, the actual internal HDD that holds /backups is separate from the other storage devices.) EDIT: I'll propose a strategy... The idea came from a comment here: LVM mirroring VS RAID1 "LVM mirrors are for replication of a logical volume to a different physical volume. It's essentially meant to "move the data to a different disk". The mirror is then broken..." That would fit my requirements well. Here is an ideal situation: establish the LV mirror on the external drive break the link with the mirror create a (persistent) snapshot on the mirror after a week, resync the mirror with the original source and update the mirror break the link and create another snapshot on the mirror. Obviously, the mirror will be like a weekly full backup. And the snapshots on the mirror will represent earlier points in time. If this would work and if it would be time efficient, it would give a nice full & differential type backup on the external drive based on LVM. I have not heard of a strategy like this before. Will it work? Could it be scripted? Thoughts? EDIT 2: Creating Portable DiskSafes With LoopbackFS And LVM Snapshots This article seems intriguing: http://www.howtoforge.com/creating-portable-disksafes-with-loopbackfs-and-lvm-snapshots Unfortunately, I don't understand exactly how to map those ideas to the strategy I'm proposing above. I'm going to ask this last bit as a separate question. I will leave my original question in place because I still desire feedback on the overall best strategy. At this moment I'm assuming it is LVM mirroring in the style of "Creating Portable DiskSafes with LVM Snapshots" but that might be wrong.

    Read the article

  • Problem in installation in My Hp g4 1226se

    - by vivek Verma
    1vivek.100 Dual booting error in Hp pavilion g4 1226se Dear sir or Madam, My name is vivek verma.... I am the user of my Hp laptop which series and model name is HP PAVILION G4 1226SE........ i have purchase in the year of 2012 and month is February.....the windows 7 home basic 64 Bit is already installed in in my laptop.... Now i want to install Ubuntu 12.04 Lts or 13.10 lts..... i have try many time to install in my laptop via live CD or USB installer....and i have try many live CD and many pen drive to install Ubuntu ... but it is not done......now i am in very big problem...... when i put my CD or USB drive to boot and install the Ubuntu......my laptop screen is goes the some black (brightness of my laptop screen is very low and there is very low visibility ) and not showing any thing on my laptop screen..... and when i move the my laptop screen.....then there is graphics option in this screen to installation of the Ubuntu option......and when i press the dual boot with setting button and press to continue them my laptop is goes for shutdown after 2 or 5 minutes..... ...... and Hp service center person is saying to me our laptop hardware has no problem.....please contact to Ubuntu tech support............. show please help me if possible..... My laptop configuration is here...... Hardware Product Name g4-1226se Product Number QJ551EA Microprocessor 2.4 GHz Intel Core i5-2430M Microprocessor Cache 3 MB L3 cache Memory 4 GB DDR3 Memory Max Upgradeable to 4 GB DDR3 Video Graphics Intel HD 3000 (up to 1.65 GB) Display 35,5 cm (14,0") High-Definition LED-backlit BrightView Display (1366 x 768) Hard Drive 500 GB SATA (5400 rpm) Multimedia Drive SuperMulti DVD±R/RW with Double Layer Support Network Card Integrated 10/100 BASE-T Ethernet LAN Wireless Connectivity 802.11 b/g/n Sound Altec Lansing speakers Keyboard Full size island-style keyboard with home roll keys Pointing Device TouchPad supporting Multi-Touch gestures with On/Off button PC Card Slots Multi-Format Digital Media Card Reader for Secure Digital cards, Multimedia cards External Ports 1 VGA 1 headphone-out 1 microphone-in 3 USB 2.0 1 RJ45 Dimensions 34.1 x 23.1 x 3.56 cm Weight Starting at 2.1 kg Power 65W AC Power Adapter 6-cell Lithium-Ion (Li-Ion) What's In The Box Webcam with Integrated Digital Microphone (VGA) Software Operating System: Windows 7 Home Basic 64bit....Genuine..... ......... Sir please help me if possible....... Name =vivek verma Contact no.+919911146737 Email [email protected]

    Read the article

  • Ubuntu 10.10 Netbook Remix on Asus Eee PC 701 4G - boot process hangs up

    - by Andrew
    I've got an old Eee PC 701 4G with the following specifications: 512 MB RAM 4GB SSD drive SM223AC 8GB SD card extension Screen resolution: 800 x 480 BIOS Revision 1101 (05/16/2008) EC Firmware version: EPC-079 Windows XP SP3 works fine on it, but I decided to switch my OS to Ubuntu. I have downloaded an Ubuntu 10.10 Netbook Remix ISO and wrote it to my FAT32 SD card using Universal-USB-Installer-1.8.3.3, as described on ubuntu.com During standard load from the SD card the boot process hangs up with black screen. If I'll press F6 while preloading Ubuntu, it sucessfully displays the boot menu, selecting language and showing 2 main commands: "Run ubuntu from USB drive" and "Insall Ubuntu". Selecting either of these commands leading to the same result - after some background work the main loading indicator is displayed ("Ubuntu" text with dotted progress bar under it), and it's progressing forever without any effect. Is Ubuntu 10.10 compatible with my Eee PC at all? How to boot it correctly?

    Read the article

  • Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI

    - by Rohan Dhruva
    I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

    Read the article

  • Installing Canon LBP6000 in Ubuntu 12.04

    - by MMA
    This is really frustrating. I am trying to install LBP6000 in Ubuntu 12.04 without any success. (Well, I had success about a week back when I first bought the printer and finally printed pages after a struggle of several hours. Then today it suddenly stopped working and I uninstalled everything and started from scratch. Now, I seem to have lost the way.) My steps Downloaded the latest Canon driver from Canon site. File Linux_CAPT_PrinterDriver_V240_uk_EN.tar.gz Got the radu script (I am allowed only two hyperlinks, so can not put the link here. You can Google radu Canon) Changed the /etc/modprobe.d/blacklist-cups-usblp.conf file as instructed in, Official Documentation. (See the section Ubuntu 12.04 Install). Now this file looks like, # cups talks to the raw USB devices, so we need to blacklist usblp to avoid # grabbing them # blacklist usblp Rebooted my machine Changed the port in radu script to 59787 as instructed in the link at step 3. (Again see the section Ubuntu 12.04 Install, or see the comment at How to Install Canon LBP Printers in Ubuntu. Also put the latest deb files from step 1 in the appropriate directory of this script. Ran the radu script. A printer, LBP6000 got added. Not two printers, one to be disabled, as appeared in the message on the terminal after running the script. sudo /etc/init.d/ccpd status shows, Canon Printer Daemon for CUPS: ccpd: 3142 3139 Results The printer does not print. Printer state (from System Setting-Printing, or at cups http interface localhost:631/printers/LBP6000) goes from Idle to Processing, a job appears in print queue, and then the job disappears and the printer state goes back to Idle. The actual printer does not even blink. Diagnostics (got help from the link in step 3, Troubleshooting) captstatusui -P LBP6000 shows communication error lsmod | grep usblp did not show anything. After running, sudo modprobe usblp, shows usblp 17885 0 However, ls -l /dev/usb/lp0 gives, ls: cannot access /dev/usb/lp0: No such file or directory /var/ccpd did not exist, created, sudo mkdir /var/ccpd sudo mkfifo /var/ccpd/fifo0 sudo chown -R lp:lp /var/ccpd Any suggestion will be appreciated. Do not know what to do.

    Read the article

  • Problem on login: Freeze just before user selection

    - by Diego Garcia
    Hi, I'm using ubuntu 10.10 and when I login it shows my login's wallpaper an appears the window where I select my user without showing it and then gets frozen. No mouse response, no keyboard responde (even if I try to num/caps lock). I tried with safe mode and same thing happens, but in that case it freeze when trying to load some USB stuff, I tought it was my USB headset or my mouse so I disconnected them but doesn't works. Any advice on how to fix this, how to login to try an update or how to post more information?

    Read the article

  • Formatting and installing Ubuntu over Windows 7 without admin password

    - by Emiliano Pasqualetti
    A borrowed a friend workstation with Windows 7 and Ubuntu 10.10. I do not have the administrator password and I would like to format everything and install Ubuntu 12.04. I have put the iso on the usb using PendriveLinux and restarted the machine. At the boot I am presented with several options but those Ubuntu ones simply load my friends Ubuntu 10.10 OS (for which I have no password). edit: I fixed this by pressing F12 at the boot before it gave me that prompt (called GRUB). I clicked USB and finally install.

    Read the article

  • Reinstall of Windows Bootloader not working

    - by MrBoxy
    It first started when I deleted my partition that had Ubuntu 12.04 on it. Little did I realize at the time that it would destroy all the resources of Grub on it, and subsequently prevent me booting into my hibernated windows. So I made a 12.10 Ubuntu live USB and reinstalled windows bootloader. When I rebooted it gave me a bootloader error saying I that it could not find the resources to boot from. So I went back to my live USB and installed boot-repair and tried to repair the mbr. It didn't work though. Here is the URL the boot-repair gave me if I was in trouble: paste.ubuntu.com/1328309 Thanks in advance :)

    Read the article

  • netbook alternate installation/update

    - by Dustin
    Ok I have an Asipre One D255E netbook. Installed 9.10 sucessfully, however no internet connections to upgrade to 10.04 or 10.10. have 10.10 alternate (couldnt get 10.04). However it says that no cd-rom present (netbook via live usb), and i direct it to sdb1 but that does not work. could someone guide me to the steps to installation via alternate ubs only (& no internet). the live usb's of 10.04 & 10.10 internet connections worked, but installation hanged (non alternate). Thank you greatly in advance.

    Read the article

  • Touchpad not working on an Acer One 725

    - by big-marc
    I installed ubuntu on a usb drive on a acer one 725, and cannot seem to be able to make the touchpad work....here is what i have xinpbig-marc@Big-Marc:~$ xinput --list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech USB Optical Mouse id=10 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad id=13 [slave pointer (2)] any can help me out....

    Read the article

  • Why won't cron run my sh script?

    - by Dmitry Narkevich
    Used gnome-schedule to create a script to set my headset as the fallback audio device because it keeps unsetting it when the headset gets disconnected or pc goes into sleep mode. Anyway, crontab is this: SHELL=/bin/sh PATH=/bin:/sbin:/usr/bin:/usr/sbin:/home/dmitry/bin * * * * * headsetfix /home/dmitry/bin/headsetfix is #!/bin/sh pacmd set-default-sink alsa_output.usb-Logitech_Inc_Logitech_USB_Headset_H540_00000000-00-H540.analog-stereo pacmd set-default-source alsa_input.usb-Logitech_Inc_Logitech_USB_Headset_H540_00000000-00-H540.analog-stereo It runs fine from the terminal. I've made sure it's chmodded to be executable, and "which headsetfix", run from cron, outputs "/home/dmitry/bin/headsetfix" so not sure what the problem is.

    Read the article

  • Ubuntu on AMD based Sony Vaio VPCY B15AG

    - by Gaurav
    Last week I bought a AMD E350 (AMD Fusion platform) based Sony VAIO (VPCYB15AG) having AMD Radeon HD 6310 graphics, I removed Windows that came along with and installed Ubuntu 10.10 (AMD64) using USB drive. During installation my touchpad was not working, I managed through keyboard, but after completing installation & restarting the machine still there was no touchpad support. Also there's no proper graphic card drivers. Even I tried connecting the USB mouse to it but the left key is not working and had to configure the mouse as left-hand to get the left click enabled. I tried searching for any possible solutions for these but found nothing helpful, is there any hope? What should I do to enable i) enable touch pad support ii) get higher resolution 1366x768, etc?

    Read the article

  • Ubuntu One downloads already existing files

    - by Islam Hassan
    I've uploaded some files to Ubuntu One from my home laptop and begin to download it on my work laptop. Then I've got a USB and copied these files directly through the USB driver. My problem now is that Ubuntu One still downloading these files although I've copied them to Ubuntu One folder. I need it to consider the already existing files as synced and don't download it again. And I need Ubuntu One for further use so I can't simply quit it. How could I mark the already existing files as synced ?

    Read the article

  • Poor mobile performance when running from Eclipse

    - by Yajirobe_LOL
    So after weeks of thinking my rendering code was bad, I accidentally discovered the following: Running my game on a Nexus S From Eclipse (Debug as - Android application): 12fps From the device while still attached to USB (getting log info in Eclipse still): 24fps From the device while not attached via USB: 56fps I was wondering if anyone else has issues like this? I mean, the problem really isn't a problem since the final release build will likely have good performance, but for the time being I don't want to have to keep (un)plugging my device in and out when testing code all day long. Is there some remedy for this or does anyone have any input/advice? Thanks.

    Read the article

  • Performance cost of running Ubuntu from external hard drive

    - by dandan78
    A friend just complained to me about Ubuntu being slow. Although I've noticed a certain lack of snappiness with Linux vs Windows in the past, I really can't say I've had much to grumble about with the recent distributions of Ubuntu. That said, his objections seem much worse than the ones I used to have and I know that his current setup is significantly more powerful than my laptop. And then it turned out he is running Ubuntu off an external HDD hooked up via USB2.0. The HD enclosure is USB3.0 but apparently he can't manage to get it to boot on USB3.0 so he switched to one of the USB2.0 ports or whatever and that works, albeit not very well. Now I would expect USB to add some overhead to communication between the computer and the HDD; SATA is after all designed to get the maximum out of a hard drive, whereas USB is, well, universal. What are your expreriences with booting off external HDDs? Edit: Does anybody know just how much of a slowdown can be expected?

    Read the article

  • No Internet On 12.04.1

    - by David Ramos
    I have no internet on Ubuntu 12.04.1 so i'm on a desktop so I got to install a .exe program to run my wireless card for my desktop so I got internet access, But I can't seem to download wine or its source files. If I do I put on my usb and boot into Ubuntu but then when I try to open it I get the programs source files etc. Anyone who could help me Please do :| ( I can't install wine from software center since I have no connection online). Note : I can download my stuff on windows 8 boot so I can transfer files to my usb to run on Ubuntu.

    Read the article

  • Ubuntu 12.04.1 Setup doesn't detect Windows 7 partition

    - by Dom
    I'm not really that of a linux pro, more of a noob. But i can handle console operations. Well, this is my system: ASUS ZenBook Prime UX31A 256 GB ADATA MX11 SSD Intel Core i5-3317U (Ivy-Bridge) I have a fresh installation of Windows 7 Ultimate (not activated) on a 90 GB NTFS Partition on my SSD, the rest is unassigned. I want to install Ubuntu 12.04.1 from an USB Stick (no CD-Drive...) created with Universal USB Installer 1.9.1.1. However I'm not givven the option 'Install alongside Windows', and when i choose 'other' it shows that 256 GB of 256 GB are unassigned (free) Memory. os-prober gave me: /dev/sda1/:Windows 7 (loader):Windows:chain I also tried: sudo dmraid -rE and: sudo apt-get remove dmraid with no success... How can I install Ubuntu alongside Windows? Thanks very much in advance!

    Read the article

  • Installing Ubuntu 12.04 on NUC intel i3 DC3217IYE

    - by Kieron
    System: NUC i3, 2 hdmi ports, ethernet, no wireless. UEFI boot 2x2gb ram 30gb mSATA internal drive Ubuntu 64bit 12.04.03 Hello i am having much trouble loading an OS on my NUC. I started out attempting another OS with various loaders (beast/hack) without much success,(various panics on boot or endless reboot loops, or graphics failures) after many tries i decided to attempt Ubuntu. Many years ago i loaded Ubuntu on an e-machine without an issue so i figured it would go smoothly, nothing could be further from the truth. The Live USB stick loads, but when i am installing the OS it always fails to load grub 2. Obviously it wont boot from SSD without grub2. I searched and found that Boot-repair should fix it...so i created a live usb with boot repair...it refuses to repair the grub because the install never finished and the needed partions are not fully created and flagged. It also demands an internet connection which i am unable to provide. I then ran gparted in an attempt to create the needed partitions manually, then re-ran boot repair turning off the "check internet" option. and disabling the re-install grub hoping it would create the missing directories and or fix the flags. it appeared to run successfully but upon return to the Ubuntu live USB it still fails at the grub2 install. also gparted doesnt have the same choices that Ubuntu install has when creating partitions, causing it to not recognize that i already had a root, or an EFI directory or it sometimes couldnt tell what the format of the partition was...all very annoying the reason i cant connect to internet (and cant upload the error logs) is the nuc only has Ethernet and the location i have to set up is too far away from modem. i can not move the monitor closer to modem as it is a 50inch LCD. I just want to do a basic install with one user acct and remote desktop (vnc) turned on so i can move the NUC to the modem connect via ethernet and then finish setting it up via Remote desktop/VNC chicken from my mac. While i await any assistance you maybe able to provide i am going to attempt to switch to the 32bit version and legacy boot to see if that can load grub. thnx again to anyone that can come up with a possible solution. i would love to hit "erase and install ubuntu" if anyone can figure out what is stopping that simple answer from working. Also disks (CD/DVD) are not an option as neither my Mac mini or my NUC have optical drives, and i have no desire to buy one for one task

    Read the article

  • Noting happens when I connect my Iphone 3G to my laptop

    - by Allwar
    Hi, how do i connect my iphone to my laptop (ubuntu 10.04) so that i can sync music and be able to look at it as a usb stick? (this is what I want to do but there is a problem.) When i connect it to my laptop nothing happens, it doesn't show up as an ikon or as a mass storage device. My Iphone runs 4.2.1 it's an Iphone 3G and it's not jailbroken for the moment, is that a problem? My laptop is an Asus 1201n ubuntu 10.04 (64-bits) Bus 002 Device 005: ID 05ac:1292 Apple, Inc. iPhone 3G I connected my Ipod Video (30 gb) and that one doesn't appear as well So I'm kind of stuck now. The problem probably lies in the system, because the usb port is working. Bus 002 Device 006: ID 05ac:1209 Apple, Inc. iPod Video

    Read the article

  • Sony VAIO is booting directly into Windows without showing grub

    - by Rohan Dhruva
    I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

    Read the article

  • Install Ubuntu 13.10 in dual boot with Windows 8.1

    - by Xaxt
    I have a laptop with installed Windows 8.1 x64. I want to intstall Ubuntu 13.10 (x64 of cause) in dual boot with it. I've made bootable USB stick (using unetbootin) with Ubuntu and tried to boot with it. It boots fine, and allows me to choose language and asks whether I want to install Ubuntu or just boot it. But if I select any ot these options, it shows black screen and hangs. I've been waiting about 15 minutes for it, but nothing happened. Light of USB stick indicates that my laptop was not trying to read from it that time. I switched off EFI in BIOS, switched AHCI/SATA modes, burned ISO image to DVD and still same effect. This topic can be called a duplicated, but I have't find what it duplicates. In other topics people asked what will happen if they update Windows 8 to 8.1 having already dual boot and I have installed Windows 8.1 and want to install Ubuntu alongside with it Did I miss something?

    Read the article

  • Wireless internet connection connects but internet does not work (no packets received). Wired does.

    - by Rodney
    When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

    Read the article

  • How to connect Nexus 7 with Ubuntu

    - by gotqn
    I want to move some files from my PC to Nexus 7. The tablet is connected to my PC's USB port and it is successfully charging. Unfortunately, the PC is not detecting the devices - what I expected is to be shown the Nexus 7 tablet as external devices (like my USB flash memory). As the tablet is connected to the my home internet network, I have checked if it will appear in the "Networks" section but it does not. I am using Ubuntu 12.4 LTS. Is there a easy way to connect the devices to my PC and move some information between them?

    Read the article

  • VirtualBox 4.2.14 is now available

    - by user12611829
    The VirtualBox development team has just released version 4.2.14, and it is now available for download. This is a maintenance release for version 4.2 and contains quite a few fixes. Here is the list from the official Changelog. VMM: another TLB invalidation fix for non-present pages VMM: fixed a performance regression (4.2.8 regression; bug #11674) GUI: fixed a crash on shutdown GUI: prevent stuck keys under certain conditions on Windows hosts (bugs #2613, #6171) VRDP: fixed a rare crash on the guest screen resize VRDP: allow to change VRDP parameters (including enabling/disabling the server) if the VM is paused USB: fixed passing through devices on Mac OS X host to a VM with 2 or more virtual CPUs (bug #7462) USB: fixed hang during isochronous transfer with certain devices (4.1 regression; Windows hosts only; bug #11839) USB: properly handle orphaned URBs (bug #11207) BIOS: fixed function for returning the PCI interrupt routing table (fixes NetWare 6.x guests) BIOS: don't use the ENTER / LEAVE instructions in the BIOS as these don't work in the real mode as set up by certain guests (e.g. Plan 9 and QNX 4) DMI: allow to configure DmiChassisType (bug #11832) Storage: fixed lost writes if iSCSI is used with snapshots and asynchronous I/O (bug #11479) Storage: fixed accessing certain VHDX images created by Windows 8 (bug #11502) Storage: fixed hang when creating a snapshot using Parallels disk images (bug #9617) 3D: seamless + 3D fixes (bug #11723) 3D: version 4.2.12 was not able to read saved states of older versions under certain conditions (bug #11718) Main/Properties: don't create a guest property for non-running VMs if the property does not exist and is about to be removed (bug #11765) Main/Properties: don't forget to make new guest properties persistent after the VM was terminated (bug #11719) Main/Display: don't lose seamless regions during screen resize Main/OVF: don't crash during import if the client forgot to call Appliance::interpret() (bug #10845) Main/OVF: don't create invalid appliances by stripping the file name if the VM name is very long (bug #11814) Main/OVF: don't fail if the appliance contains multiple file references (bug #10689) Main/Metrics: fixed Solaris file descriptor leak Settings: limit depth of snapshot tree to 250 levels, as more will lead to decreased performance and may trigger crashes VBoxManage: fixed setting the parent UUID on diff images using sethdparentuuid Linux hosts: work around for not crashing as a result of automatic NUMA balancing which was introduced in Linux 3.8 (bug #11610) Windows installer: force the installation of the public certificate in background (i.e. completely prevent user interaction) if the --silent command line option is specified Windows Additions: fixed problems with partial install in the unattended case Windows Additions: fixed display glitch with the Start button in seamless mode for some themes Windows Additions: Seamless mode and auto-resize fixes Windows Additions: fixed trying to to retrieve new auto-logon credentials if current ones were not processed yet Windows Additions installer: added the /with_wddm switch to select the experimental WDDM driver by default Linux Additions: fixed setting own timed out and aborted texts in information label of the lightdm greeter Linux Additions: fixed compilation against Linux 3.2.0 Ubuntu kernels (4.2.12 regression as a side effect of the Debian kernel build fix; bug #11709) X11 Additions: reduced the CPU load of VBoxClient in drag'and'drop mode OS/2 Additions: made the mouse wheel work (bug #6793) Guest Additions: fixed problems copying and pasting between two guests on an X11 host (bug #11792) The full changelog can be found here. You can download binaries for Solaris, Linux, Windows and MacOS hosts at http://www.virtualbox.org/wiki/Downloads Technocrati Tags: Oracle Virtualization VirtualBox

    Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >