Search Results

Search found 6065 results on 243 pages for 'usb modeswitch'.

Page 118/243 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• Will readyboost speed up a secondary partion or harddrive?

  - by Sebastian

  I'm building a new computer and plan on using a few spare USB sticks with readyboost to cache disk writes. I'll be running Windows 7 Enterprise SP1 x64 I have a single 2 TB disk, and plan to make a partition for windows (100 GB) and use the rest for data. I know Readyboost will work nicely for the C drive, but am unable to find any information on whether it will accelerate a second drive or partition. Just to clarify, I'm NOT trying to use the harddrive instead of the usb sticks. I'm trying to speed up the second partition using the USB sticks So, will readyboost work for a secondary partion or harddrive?

  Read the article

• how to disable to automatic wireless interface up in ubuntu? [closed]

  - by Surjya Narayana Padhi

  On my laptop I have a built in wireless card and I got one external connected via usb. By ifconfig command I saw both the cards connects to internet and gets IP. eth1 - the interface my laptop has in-built wlan1 - I have connected externally via usb. Now I applied "sudo ifconfig eth1 down" so that i can use only wlan1. But this eth1 goes down for sometime and then come up again automatically. So I am not able to test my externally usb connected wifi adapter. Can anyone suggest me way to disable eth1 interface?

  Read the article

• Reset disk does not work for different model of computer

  - by dato

  I've created a reset USB disk on my HP computer, with Windows 7 Ultimate 32-bit, and it works fine. However, it does not work for Acer computers (notebooks too), so what is the problem here? I've have created it for the same user named user, and the password is exactly the same as well. Is it possible to show the language bar with a keyboard shortcut at the logon screen in Windows 7? I know I can do it through Control Panel, but I can't log into the system. When I click Reset Passwword, it shows me my USB flash drive and says that the password hint is on this USB drive. Then I click Next and type the new passwword, then confirm this new password, but an error dialog is shown. It says that an error occured when trying to change the password for this user-

  Read the article

• Western Digital Caviar SE16 not recognized

  - by NStorm

  Before I start, I have been looking at quite a few websites and I still have not found an answer to my problem. I have been building my own computer recently and I have just received the hard drive (WD Caviar SE16 WD5000AAKS) I was planning to put in my computer. After connecting the SATA power cable (99.99999% sure it is connected correctly) and the SATA cable to my motherboard (ASUS M5A78L-M/USB3) I booted my computer into a Linux Mint 13 XFCE 64-bit live USB expecting to see a hard drive when I came to install. Sadly when I checked the only hard drive that was showing was /dev/sda which was my USB with the Linux files on it. I also checked gparted and no hard drive other than my USB was showing up there either. Lastly I checked my BIOS and no matter what SATA port I connected the HDD to it wouldn't show up there either. Does anyone have any advice? Some images of my set-up which could help are bellow: Thanks in advance, Nick

  Read the article

• How do I refresh Disk Utility?

  - by detly

  I do a lot of live system building, which eventually involves imaging a USB drive with the built binary image: dd if=binary.img of=/dev/sdX sync ...where /dev/sdX is a USB drive. As part of my workflow, I like to have Ubuntu's Disk Utility open so I can verify the drive letter and unmount anything that gets mounted automatically. I also use it to create extra partitions for persistence. The trouble is, after writing the image to the device — and even after the sync operation — Disk Utility doesn't show the new partition. It just shows free space. GParted sees it and fdisk sees it. Even after closing and opening Disk Utility, it still shows only free space. If I click "Safe Removal" and physically unplug and replug the USB drive, Disk Utility will then see the partition. Why do I need to remove and re-insert the drive for Disk Utility to see the partitions on it? Can I force Disk Utility to update its information without needing to do this? (using Disk Utility 3.0.2 under Ubuntu 11.10.)

  Read the article

• "wrong fs type, bad option, bad superblock" error while mounting FAT Drives

  - by cshubhamrao

  I am unable to mount any fat32 or fat16 formatted usb disks under Ubuntu 13.10. The thing here to note is that it is happening only with fat formatted Disks. ntfs, ext formatted external usb disks work well (I tried formatting the same with ext4 and it worked) While mounting via nautilus: Error while mounting from terminal: root@shubham-pc:~# mount -t vfat /dev/sdc1 /media/shubham/n mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so As suggested by the error: Output from dmesg | tail root@shubham-pc:~# dmesg | tail [ 3545.482598] scsi8 : usb-storage 1-1:1.0 [ 3546.481530] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 1.26 PQ: 0 ANSI: 5 [ 3546.482373] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 3546.483758] sd 8:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 3546.485254] sd 8:0:0:0: [sdc] Write Protect is off [ 3546.485262] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 3546.488314] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3546.499820] sdc: sdc1 [ 3546.503388] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 3547.273396] FAT-fs (sdc1): IO charset iso8859-1 not found Output from fsck.vfat: root@shubham-pc:~# fsck.vfat /dev/sdc1 dosfsck 3.0.16, 01 Mar 2013, FAT32, LFN /dev/sdc1: 1 files, 1/1949978 clusters All normal Tried re-creating the whole partition table and then formatting as fat32 but to no avail so the possibility of corrupted drive is ruled out. Tried the same with around 4 Disks or so and all have the same things

  Read the article

• Why is my Internet connection randomly dropping?

  - by Jeanno

  Ever since I have installed 12.04 (clean install not an upgrade), i have been having a drop in the Internet connection. The drop in the connection can be anything from 15 seconds to about 3 mins, and then the connection comes back. This behaviour happens while I am actively browsing the Internet, or if I wake up the computer and open Firefox (sometimes I have connection and sometimes I don't) . Please note that when the internet connection is on, it is not slow (as speedtest.net results show) In the beginning, I thought it was a problem with the driver r8169 for my RTL8111/8168B Ethernet card, so I downloaded the r8168 from Realtek website, followed the detailed instructions (blacklisted r8169, changed the file to '.bsh' ...), but still the same problem persisted. So I switched to a wireless connection, and I got the same problem with internet connection dropping randomly. Any ideas? Thanks in advance Output from 'lspci -v' Code: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-fa0fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-f60fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f6108000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f6107000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f6100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fa400000-fa4fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Prefetchable memory behind bridge: 00000000dc100000-00000000dc1fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa300000-fa3fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa200000-fa2fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f6106000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at f6105000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Dell Device 04a7 Flags: medium devsel, IRQ 5 Memory at f6104000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=128M] Memory at d8000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fa080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 02:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f4000000 (32-bit, non-prefetchable) [size=32M] Memory at c0000000 (64-bit, prefetchable) [size=128M] Memory at c8000000 (64-bit, prefetchable) [size=64M] I/O ports at d000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f6080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa400000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 51 I/O ports at c000 [size=256] Memory at dc104000 (64-bit, prefetchable) [size=4K] Memory at dc100000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8168 Kernel modules: r8168 05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fa300000 (64-bit, non-prefetchable) [size=2K] I/O ports at b000 [size=256] Capabilities: [50] Power Management version 3 Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [98] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [130] Device Serial Number 00-10-dc-ff-ff-cf-56-1a Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 19 I/O ports at a040 [size=8] I/O ports at a030 [size=4] I/O ports at a020 [size=8] I/O ports at a010 [size=4] I/O ports at a000 [size=16] Memory at fa210000 (32-bit, non-prefetchable) [size=512] Capabilities: [8c] Power Management version 3 Capabilities: [50] Express Legacy Endpoint, MSI 00 Kernel driver in use: ahci Note that my wireless card is not showing, I have the Ralink 3390 card (which apparently does not show up on Ubuntu for some reason), however I am able to connect to wireless network and connect to the internet (when it is working)

  Read the article

• How to set acpi=off for installation?

  - by Johan Helgø

  I'm trying to install Ubuntu 12.04 LTS 64bit from a USB created in Windows using the recommended software from pendrivelinux. The USB is tested on two laptops and works fine. The install does not work on my desktop PC, it either hangs with lots of text on the screen, or it just gives me a screen with garbled colors. Right now it hangs on "[3.925311] Initializing USB Mass Storage driver...", but it hangs on different spots every time I try. I know that acpi=off will fix this. On older versions, there used to be a pink screen with the icon of a keyboard, at that screen I could press ESC, and I would then get a long list of languages, I could choose English, and then I would get options for setting acpi=off, then install without any problems. This new install menu does not have those options. The (now black and white) "Installer boot menu"'s advanced options is blank. There simply are no advanced options. If I go to help, then press F6, I get to a help screen describing the different boot parameters. I see examples of writing "Install acpi=off" However, writing "install acpi=off" it gives an error saying "could not find kernel image: install". How can I install Ubuntu 12.04 with acpi=off? (Oh, btw, nothing happens if I press F6 in the "Installer boot menu")

  Read the article

• How to Recover that Photo, Picture or File You Deleted Accidentally

  - by The Geek

  Have you ever accidentally deleted a photo on your camera, computer, USB drive, or anywhere else? What you might not know is that you can usually restore those pictures—even from your camera’s memory stick. Windows tries to prevent you from making a big mistake by providing the Recycle Bin, where deleted files hang around for a while—but unfortunately it doesn’t work for external USB drives, USB flash drives, memory sticks, or mapped drives. Luckily there’s another way to recover deleted files. Note: we originally wrote this article a year ago, but we’ve received this question so many times from readers, friends, and families that we’ve polished it up and are republishing it for everybody. So far, everybody has reported success! Latest Features How-To Geek ETC How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin The How-To Geek Video Guide to Using Windows 7 Speech Recognition How To Create Your Own Custom ASCII Art from Any Image How To Process Camera Raw Without Paying for Adobe Photoshop What is the Internet? From the Today Show January 1994 [Historical Video] Take Screenshots and Edit Them in Chrome and Iron Using Aviary Screen Capture Run Android 3.0 on a Hacked Nook Google Art Project Takes You Inside World Famous Museums Emerald Waves and Moody Skies Wallpaper Change Your MAC Address to Avoid Free Internet Restrictions

  Read the article

• Ubuntu 12.04 taking too much time to boot

  - by adarshdinesh

  Ubuntu 12.04 is taking much time for booting, Here is the system kernel message while booting .It is showing that some anacron was killed ,why ? and how to fix the problem ? [ 2.241047] scsi6 : usb-storage 2-1.6:1.0 [ 2.241501] usbcore: registered new interface driver usb-storage [ 2.241895] USB Mass Storage support registered. [ 3.240670] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.241791] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.243083] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 12.568641] Adding 4037904k swap on /dev/sda3. Priority:-1 extents:1 across:4037904k [ 12.615014] udevd[462]: starting version 175 [ 12.651334] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 12.655283] [drm] Initialized drm 1.1.0 20060810 ................... [ 14.118369] init: alsa-restore main process (982) terminated with status 19 [ 14.252595] init: anacron main process (1033) killed by TERM signal [ 14.285763] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 14.285841] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.285925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.285991] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.615073] init: plymouth-stop pre-start process (1222) terminated with status 1 [ 16.447287] wlan0: authenticate with c0:8a:de:7c:60:e8 (try 1) [ 16.448858] wlan0: authenticated [ 16.453405] wlan0: associate with c0:8a:de:7c:60:e8 (try 1) [ 16.456392] wlan0: RX AssocResp from c0:8a:de:7c:60:e8 (capab=0x431 status=0 aid=2) [ 16.456398] wlan0: associated [ 16.457014] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 16.457017] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 16.457019] ieee80211 phy0: changing basic rates failed: -22 [ 16.457021] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 16.457226] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.654196] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 17.823565] ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 180/256 dur 1946/1504 [ 18.220865] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.881422] wlan0: no IPv6 routers present [ 68.228293] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 73.240133] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 76.574490] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 102.180006] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 103.100984] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 124.171624] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)

  Read the article

• Ubuntu 12.10 boots to purple or black screen but intermittently boots fine

  - by Nic

  I have a fresh install of Ubuntu 12.10 64bit dual booting with Win7 64bit. Windows boots fine every time. When I choose Ubuntu from Grub2 menu it will sometimes boot just fine. Most of the times though it gets stuck at a purple screen with nothing happening and no keys or key combinations working. Other times instead of the purple screen I get a black screen with a flashing cursor at the top. Nothing happens. I need to hold down the power button to restart and after a couple times of trying it will eventually boot into Ubuntu. Once that happens everything runs without any problems. I have tried different approaches to fix the problem but to no avail. I tried removing "quiet splash", used no splash, and nomodeset What I got from this was seeing all the text of the boot process but more often than not the process gets stuck right after recognizing all the USB ports and devices. If it gets stuck nothing happens (except when i plug in a usb device: it still recognizes it with a new line of text) In the case when the boot process works, after it lists the usb devices it tells me something like: recovery of read-only filesystem necessary. (its the filesystem that ubuntu runs on) then it does the recovery and i get: recovery complete. after that Ubuntu will boot properly and I get to see the login screen. I have no idea what to do to fix that problem. I have to reboot 3 to 5 times everytime I want to get into Ubuntu and I feel like I'm breaking my new Laptop. (its a lenovo ideapad z580 btw. i5 processor and nvidia gtx640 graphics card) I hope someone can help me. Thanks. Edit: i just got a "failed to enable AA error" message when waking it up from suspend. I don't know if that helps or has anything to do with the boot probs.

  Read the article

• Ubuntu installation on iMac

  - by Shanew

  I have an iMac configured as follows - Screen 27" CPU 3.4 GHz i7 Graphics AMD Radeon HD 6970 1024 MB I downloaded Ubuntu version 11.10 64 bit ISO and burnt that to both DVD and USB stick as per the instructions on Ubuntu's download page. Neither will boot. Symptoms are as follows - DVD: When the iMac is restarted and booted from DVD (labelled Windows which isn't mentioned in Ubuntu's website instructions) one line is displayed against a black screen displaying a message about the developer and date. After 5 minutes the message hangs and the DVD ceases to spin. USB Stick: Strangely I have to select the EFI boot CD icon which appears after holding down the Alt key. A text menu appears offering me to try Ubuntu without installing. I select this and the screen goes blank and stays blank. Any ideas? Lastly, after writing Ubuntu to DVD and USB stick, neither could be read by OSX making the instructions to eject them as per Ubuntu website's instructions useless. This might help? Thanks, Shane.

  Read the article

• Is there a way to disable the hardware on/off switch for the Wireless interface?

  - by avee

  I have an HP 520 and is running the latest Ubuntu 11.10. The hardware works fine with Ubuntu with one exception: The device has a hardware switch for turning the wifi on and off. Every time the wi-fi is disabled through the hardware switch, I am unable to bring it on again. The message on the networking popup would be device not ready. What I am looking for is a way to disable the hardware switch altogether so that when users accidentally press the button, the wifi would not be disabled. There is no setting to disable the switch in the BIOS. Hardware info from lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) 02:06.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) 02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01) 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) The output from lsmod | grep iwl: iwl3945 73329 0 iwl_legacy 71499 1 iwl3945 mac80211 272785 2 iwl3945,iwl_legacy cfg80211 172392 3 iwl3945,iwl_legacy,mac80211

  Read the article

• how do I make my Dualshock 3 gamepad work in Ubuntu 14.04?

  - by user290527

  When my desktop computer was running Ubuntu 12.04, my PS3 controllers would work with USB. I didn't need to do any special setup. I could just plug it in before I start SuperTuxKart and it would recognize it. I can also do this on my laptop (still running 12.04). Since I gave my desktop a fresh install of Ubuntu 14.04, the controller would never work. I have played with some installed software that I found when looking for information. Here is what I get with xboxdrv: liam@Liam-CustomDesktop:~$ sudo xboxdrv --detach-kernel-driver xboxdrv 0.8.5 - http://pingus.seul.org/~grumbel/xboxdrv/ Copyright © 2008-2011 Ingo Ruhnke <[email protected]> Licensed under GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details. Controller: PLAYSTATION(R)3 Controller Vendor/Product: 054c:0268 USB Path: 003:012 Controller Type: Playstation 3 USB Your Xbox/Xbox360 controller should now be available as: /dev/input/js0 /dev/input/event16 Press Ctrl-c to quit, use '--silent' to suppress the event output So the existence of this controller is acknowledged at on my computer. But it never works for input. In my old installation, I didn't even need to get software like xboxdrv for it to work. I have never tried bluetooth on either computer, but I don't think I even have that on my desktop. So now, how do I make my gamepad work in Ubuntu 14.04?

  Read the article

• Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs)

  - by simpleton

  I downloaded 12.04.1 and md5 sum checked them and everything is good. Made a live usb and booted up... Just gets to where its about to start with the purple ubuntu loading screen then it goes back to text and gives this message: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) mount: mounting /dev/loop0 on ///filesystem.squashfs failed: Input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs This happens in the live option, or persistent even the file checking one doesn't work Also I've tried a few different F6 options to no avail. I used 'LiLi USB creator' and 'unetbootin' and also 'Universal USB Installer,' all with the same results. I've also tried using a VM and it showed the same. That is when I figured I had a corrupt .iso so I downloaded it again checked the MD5: e235b63c02644e219b7bf3668f479c9e. Only I'm having the same problem. I'm just about ready to give up on 12.04.1 and just go back to 10.04 utill the next LTS comes out. I've got a dell mini 10 btw. Thanks for your time.

  Read the article

• How do I restore a backup of my keyring (containing ssh key passprases, nautilus remote filesystem passwords and wifi passwords)?

  - by con-f-use

  I changed the disk on my laptop and installed Ubuntu on the new disk. Old disk had 12.04 upgraded to 12.10 on it. Now I want to copy my old keyring with WiFi passwords, ftp passwords for nautilus and ssh key passphrases. I have the whole data from the old disk available (is now a USB disk and I did not delete the old data yet or do anything with it - I could still put it in the laptop and boot from it like nothing happend). The old methods of just copying ~/.gconf/... and ~/.gnome2/keyrings won't work. Did I miss something? 1. Edit: I figure one needs to copy files not located in the users home directory as well. I copied the whole old /home/confus (which is my home directory) to the fresh install to no effect. That whole copy is now reverted to the fresh install's home directory, so my /home/confus is as it was the after fresh install. 2. Edit: The folder /etc/NetworkManager/system-connections seems to be the place for WiFi passwords. Could be that /usr/share/keyrings is important as well for ssh keys - that's the only sensible thing that a search came up with: find /usr/ -name "*keyring* 3. Edit: Still no ssh and ftp passwords from the keyring. What I did: Convert old hard drive to usb drive Put new drive in the laptop and installed fresh version of 12.10 there Booted from old hdd via USB and copied its /etc/NetwrokManager/system-connections, ~/.gconf/ and ~/.gnome2/keyrings, ~/.ssh over to the new disk. Confirmed that all keys on the old install work Booted from new disk Result: No passphrase for ssh keys, no ftp passwords in keyring. At least the WiFi passwords are migrated.

  Read the article

• LiveCD Boot/Install

  - by Jon

  I have recently built a new computer and have been looking to dual-boot alongside Windows. Trying to boot/install off Ubuntu/Dedora/Arch live CDs has failed across all distros and I keep getting the error: [34.5173939] ata9.00: exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.517403] ata9: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.517413] ata9.00: failed command: READ FPDMA QUEUED [34.517420] ata9.00: cmd 60/08:00:00:6d:70/00:00:74:00:00/40 tag 0 ncq 4096 in [34.517420] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.517433] ata9.00: status: { DRDY } [34.667134] ata10.00 exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.667134] ata10: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.667153] ata10.00: failed command: IDENTIFY PACKET DEVICE [34.667159] ata10.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [34.667160] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.667170] ata10.00: status: { DRDY } I am using a new ASUS Z77 Sabertooth motherboard with a Seagate Barracuda ST1000DM003 1TB 7200RPM hard drive. I am not entirely sure why I can't even boot off the live CD? Any ideas? Hi thanks for the quick response. All Distros were direct download from their respective websites, I have tried both CD boot with all distros and USB boot with Arch only. I have just updated my BIOS as well an am still receiving the same error. The fact that it happens on CD and USB tell's me it's not an optical drive issue. All information I can find on this seems to relate to hard drives failing on already installed linux boxes or faulty SATA cables. I am a bit confused why this issue would be preventing a CD/USB boot though. Is there any more info I can provide that might help uncover the source of the problem? Cheers, Jon

  Read the article

• Unable to boot Windows after installing Ubuntu 12.04 - error: invalid efi file path

  - by user113350

  I have a Laptop (ASUS X310A, I installed Ubuntu 12.04 to be side by side with Windows 7 but I seem to have gotten a problem with booting Windows 7. I used the Boot Repair twice with no results. Boot-Repair info: http://paste.ubuntu.com/1417623/ The error I get when starting Windows 7 from GRUB is: error: invalid efi file path In Boot Manager or Menu, I have 3 options now: 2x for Ubuntu (maybe cause I did boot-repair twice) 1x Windows boot manager (If I boot this it opens "ASUS Preload Wizard", it gives me the option to re-install windows losing all previous data -) When I was making the partition before installing Ubuntu, I made the new partition by making sda4 smaller and adding ext4 mounted: "\" and adding a swap area. Installed it and it didn't work, nothing worked. So i booted Ubuntu from the USB again and deleted the partitions I made and decided to make sda3 smaller and making the partitions but this time it gave me the option that I could mount sda3 on "\windows" or "\dos" I ignored it and didn't choose neither because the I know that it doesn't need to be mounted and proceeded to create what is now sda7 (ext4) and sda8 (swap area). It still didn't work so I booted from USB and did the first boot-repair, so I was able to boot Ubuntu now but not windows, but when I did it through my USB I was not able to update boot-repair, so i decided to redo the boot-repair from Ubuntu running on the Hardisk (fully updated) and it still didn't work. In GRUB this is what i see (when booting using Ubuntu as first option in Boot Menu): Ubuntu, with Linux 3.2.0-29-generic Ubuntu, with Linux 3.2.0-29-generic (recovery mode) Windows UEFI loader Windows Boot UEFI bootx64.efi.bkp Windows 7 (loader) (on /dev/sda3) Windows Recovery Environment (loader) (on /dev/sda5) I tried all the ones starting with "Windows" they all don't work Please help, Many Thanks

  Read the article

• Inconsistent booting problem 12.04LTS on Asus U46E RAL7

  - by G. He

  The laptop is dual booting with windows 7 and ubuntu 11.10. For 11.10 to boot, I had to add 'nolapic' in GRUB boot options. I downloaded 12.04LTS LiveCD yesterday and made a CD and a bootable USB stick. With both USB and LiveCD, occasionally I can boot into 12.04. But many times, the boot process stuck at some point. For USB boot, sometime it works. But other times, it seems to stuck right after seeing the message: NMI watchdog enabled. takes one hw-pmu counted [0.408590] #2 The number in [] changes. Some times it stuck at #2, and sometimes at #3. For LiveCD boot, sometime it works. But when it stuck, it stuck at different places. At times, the boot process go directly to a blank screen with a blink '_' at up left corner. Sometime it went a bit further, after showing options to try/install ubuntu then stuck with a blank screen with blink '_'. Anything I can do to get around of this?

  Read the article

• Cannot boot into ubuntu 12.10

  - by sriram

  Below given are the steps which I followed to install ubuntu 12.10 with existing windows 8 in my machine. I downloaded ubuntu 12.10 into my disk and made it bootable from my usb by selecting that iso file. Then restared my mahine and in BIOS I selected boot from usb. Went into Linux os and selected install ubuntu alongside windows 8. It asked for memory allocation and I selected 550 GB for Ubuntu and 404GB for Windows. After that it completed ubuntu installation. The booted into my windows 8 and used easyBCD to add a new entry. Ubuntu grup2 Now the easyBCD shows, There are a total of 4 entries listed in the bootloader. Default: Windows 8 Timeout: 10 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Lenovo Recovery System BCD ID: {e58d0cb6-2eae-11e2-9d20-806e6f6e6963} Device: \Device\HarddiskVolume3 Bootloader Path: \EFI\Microsoft\Boot\LrsBootMgr.efi Entry #2 Name: EFI USB Device BCD ID: {e58d0cb5-2eae-11e2-9d20-806e6f6e6963} Device: Unknown Bootloader Path: Entry #3 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Entry #4 Name: Ubuntu 12.10 BCD ID: {6f173570-3bce-11e2-be74-c0143dd589c0} Drive: C:\ Bootloader Path: \NST\AutoNeoGrub0.mbr Next I restarted my system and in the boot options it shows windows 8 and ubuntu 12.10 When I click on ubuntu it displays, \NST\AutoNeoGrub0.mbr status 0xc000007b The application or operating system cold not be loaded because a required file is missing or contains errors. Can you help me resolve this... Thanks :)

  Read the article

• Dell Laptop's Bluetooth isn't detected by Ubuntu

  - by vishwaje

  I have Dell vostro 3500 Laptop. I Installed Ubuntu 12.04. It doesn't detect my bluetooth. below is my information. lsusb | grep Bluetooth Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) lsmod | grep bluetooth bluetooth 158438 10 bnep,rfcomm rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: no 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: no (wifi working fine. I disabled it using network menu. So, it's fine) dmesg | grep Bluetooth [ 21.981835] Bluetooth: Core ver 2.16 [ 21.981872] Bluetooth: HCI device and connection manager initialized [ 21.981877] Bluetooth: HCI socket layer initialized [ 21.981881] Bluetooth: L2CAP socket layer initialized [ 21.981891] Bluetooth: SCO socket layer initialized [ 21.986047] Bluetooth: RFCOMM TTY layer initialized [ 21.986059] Bluetooth: RFCOMM socket layer initialized [ 21.986065] Bluetooth: RFCOMM ver 1.11 [ 22.361783] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.361791] Bluetooth: BNEP filters: protocol multicast So How can I fix this? I saw other place (I don't remember which site) They said, some times, when in windows, if bluetooth disabled by windows driver, It can't be enabled by linux. So, I should install windows and enable blueethooth from windows and then re install linux. That is impossible for me, because I don't have Windows installation media. But I tried this, which is I installed windows xp on virtual box. Vbox showed me thow unknow USB devices. I connected them and installed windows bluethooth drivers to xp. But it didn't ditected Bluethooth either. Also, when I set off mode in hardware switch, those unknown devices disappear from Vbox usb device seletcion menu. So, they are definitely something to do with wifi or bluethooth. Please help me..

  Read the article

• Ubuntu 13.10 installer making no changes to partition, even after complete

  - by dragonhart6505

  Trying to install Ubuntu 13.10 (x64 package) on a HP Probook 4430S from USB made with UnetBootin. Intel Celeron B810 Dual-core x64 1.6ghz 4gb Ram Intel Graphics HD 2000 320GB HDD - 3 partitions (1 with backup files - 40gb, 2 Win7 that were dual-boot but no longer boot after attempting to install - 55gb and 222gb) I am fine with losing the data on the 222gb partition, but when trying to install it only shows the 55gb and the 222gb, but the 222gb is not 222gb...its including the 40gb backup. Whatever, went through with the installation anyway. Files can be replaced (just backed-up games anyway.) Installation appears to run without a hitch on the now 222gb/262gb partition, formatted to ext4 with the installer itself. Asks to reboot to begin using. Upon rebooting, I get the GNU boot selection screen. Press Enter on "Ubuntu". Get a "Gave up booting from root..." or something error. Reboot and load "Try without installing" option from USB. Once booted, nothing has changed! All 3 partitions are still present, all files intact. But now I can't boot my Win7 55gb partition. EVERYTHING in the "Try..." loader works perfectly. Bluetooth, Wifi, Display adapter, SD Card reader, HDMI-Out, DVD drive, USB ports...even reads correct battery data. Help?

  Read the article

• How to set up an inter-OS partition?

  - by Confuzzled Persun

  I need a working partition configuration for use and accessibility on both Ubuntu and Windows. I have an 8GB USB flash drive onto which I am installing Ubuntu 11.10 so that I can have a personal bootable OS wherever I go. I've installed Ubuntu several times, but I just can't seem to get this one partition right. This is my own configuration: Partition 1: Primary - 200MB - Beginning - Ext4 - /boot Partition 2: Primary - 1300MB - End - swap area Partition 3: Logical - 5200MB - Beginning - Ext4 - / Partition 4: Logical - 1258MB - Beginning - Ext4 - /home Partition 5: Logical - 42MB - End - FAT32? - /windows? What I want to do is to get partition 5 configured so I can access it on both the installed Ubuntu system and a Windows system (when the USB drive is connected while Windows is booted). Basically, what I want is Ubuntu installed on the USB drive along with a partition that I can access with other operating systems. I'm thinking I just need the technical configuration of "Use as:" and "Mount point:" for my final partition. But I don't know. Any help with this is appreciated. And any other tips are appreciated as well.

  Read the article

• Why do I always get this error when using 'apt-get' commands?

  - by Venki

  I am using Ubuntu 14.04(with Unity). Just today(as of the date of this post) I did a sudo apt-get update && sudo apt-get upgrade and at the end of the 'Upgrade' process I got the following error :- Setting up crossplatformui (1.0.38) ... * Stopping ACPI services... [ OK ] * Starting ACPI services... [ OK ] package libqtgui4 exist QT_VERSION = 4 make -C /lib/modules/3.13.0-27-generic/build M=/usr/local/bin/ztemtApp/zteusbserial/below2.6.27 modules make[1]: Entering directory `/usr/src/linux-headers-3.13.0-27-generic' CC [M] /usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.o /usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.c:34:28: fatal error: linux/smp_lock.h: No such file or directory #include <linux/smp_lock.h> ^ compilation terminated. make[2]: *** [/usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.o] Error 1 make[1]: *** [_module_/usr/local/bin/ztemtApp/zteusbserial/below2.6.27] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.13.0-27-generic' make: *** [modules] Error 2 dpkg: error processing package crossplatformui (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: crossplatformui E: Sub-process /usr/bin/dpkg returned an error code (1) From then on whatever apt-get command I use(so far as I know, except apt-get update) I keep getting the above error at the end of the process. But whichever apt-get command I use does what it has to without fail.(For example I tried installing blender with sudo apt-get install blender and it installed fine though it showed the above error.) After this I even got a kernel update(from 3.13.0-27 to 3.13.0-29 via the Software Updater), but even now the issue persists. How do I solve this issue?

  Read the article

• Gigabyte u24f Touchpad (elantech) not detected

  - by user314973

  A new Ubuntu user here. I just installed Ubuntu 14.04 on my gigabyte U24F laptop. At first the touch-pad (I believe it's elantech) was working fine but one day I turned it off using fn+f10 key from the keyboard. The next day I could no longer turn it back on and it has since been undetected by the system. xinput returns Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Video Bus id=9 [slave keyboard (3)] ? Power Button id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] so there's no touch-pad detected. I'm using a USB mouse at the moment. Attempting to run synclient gives "Couldn't find synaptics properties. No synaptics driver loaded?" Things I've tried so far to no avail Reinstalling xserver-xorg-input-synaptics. Checking dconf.editor settings, touchpad is enabled. Booting into a live usb session, touchpad no longer even works in this case. (Does this mean a fresh install wouldn't even solve the problem?) Any help is greatly appreciated!

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >