Search Results

Search found 3582 results on 144 pages for 'digital camera'.

Page 122/144 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

  • Games consoles won't connect through the TP-Link TL-WA500G Access Point

    - by Manfred Wolff
    I hope that someone can help me. I have several Laptops and other devices, all using my Wireless Router (Sky Digital Netgear) To extend the range to the back of the house, I purchased a TP-Link TL-WA500G Range extender. configured just as a pure repeater, it picks up the signal from the Netgear Router. The Netgear Router does the DHCP, handing out the IP addresses. This all works a treat with several different laptops and my iPone4S, but when my son tries to use his XBox360, Sony Playstation3 or the Nintendo Wii those devices fail to acquire an IP address. They just sit their waiting for the IP config. This also happens with my wife's HTC desire ONE Android phone. My son says that, when his HTC Desire C won't get an IP address, he just unplugs the AP briefly - the phone will connect and he puts the AP back on. Once he is connected to the Router, the AP won't disturb function. The Games Consoles don't seem to work like that. They stop working, when the AP is reconnected. I had my son try to configure permanent IP addresses, and he said that did not work either, though I have to confirm that, as I did not see that for myself. Has anybody seen this before? I have searched the Net and have not found any similar problems anywhere. I wonder if there is setting somewhere that would fix this. Many thanks for anyone reading this and trying to help. M

    Read the article

  • Motherboard Dying? AHCI Drive Init and boot loop intermittent failure

    - by Adam Heath
    My computer is now intermittently failing to boot up. For the last couple of days, when I turn it on it hangs on "AHCI Drive Init...", and when powered off and on again, it booted up fine. Today, it did the same but failed in a few other ways too, seemingly at random: Hangs on "AHCI Drive Init..." Boot loop (after "AHCI Drive Init..." appears for a split second (no drives listed)) Black screen (after "AHCI Drive Init..." appears for a split second, a black screen with all fans still running) The interesting part is that the above is not affected by what drives are connected, or what to. I have tried both disks, each disk individually and no disks (along with trying the primary and secondary SATA controllers), none of this has any effect on what happens. After about 20+ attempts of different combinations, it suddenly decided it would boot up into Windows, and I hadn't touched anything for about 2 cycles. Motherboard: Gigabyte GA-870A-USB3 Processor: Amd Phoenom II x6 1090T RAM: 8GB Corsair 1600 Primary Disk: Plextor 128GB SSD Secondary Disk: Western Digital Black 1TB OS: Windows 8.1 Is this my motherboard dying? Or could something else be the cause? Thanks!

    Read the article

  • Windows 8 Windows Store (Metro/ModernUI) applications not working (just show 'busy' animation or white screen)

    - by davidm_uk
    I have a Dell XPS 15 which shipped with Windows 7 x64, which I recently upgraded to Windows 8. The process went surprisingly smoothly (given that this was an upgrade, not a complete re-install), and the system generally seems very stable. However, today I noticed that several of the Windows Store apps don't work: they all behave in the same way, launching but then showing a spinning 'wait' animation indefinitely. This is affecting the standard Microsoft Mail, Store, Weather, News, Travel, Finance, Sport, Games and Music apps. The Bing app just shows a Bing logo on a coloured background (but no wait animation). The Calendar, Photos and SkyDrive apps open but then show a white screen. The Maps and Camera apps work without problems. The live tiles on the Start screen are updating correctly, for example the Mail app's tile shows a summary of new mail despite the Mail app's problems. All of these applications were working correctly a few days ago. I'm sure I've used several without problems since the last Windows update occurred on 7th November. Any suggestions on what might have happened and/or how to fix it would be very welcome. I don't need these Windows Store applications, but the fact that they're not working is irritating me.

    Read the article

  • Trying to retrieve data with a thermaltake blacX enclosure: Windows 7 believes the drive to be "uninitialized"

    - by Peeter Joot
    I have a laptop that won't boot. It appears to be a power problem ... laptop auto-turns-off within about 10 seconds of pressing the power button (with power buttons lighted temporarily and no display with or without external monitor). I've followed the dell troubleshooting guide which suggested reseating the memory modules and the hard drives, but that didn't help. Before trying to have the laptop serviced, I wanted to get some data off off the hard drive. I bought a thermaltake blacX enclosure, intending to use this to both use to retrieve the drive data with, and then later use as external storage. Following the instructions (insert cables, insert drive power on) goes fine, and Windows 7 on another laptop installs the device driver software. However, no drive letter shows up in 'Computer'. Under Computer-manage-storage I see the drive is there, and there's an option to "initialize" the drive. The Windows "initialize" dialog gives me the option to pick between "MBR" and "GPT" partitioning, which sounds like a good way to destroy the data on the drive. I'm thinking that I've purchased the wrong device for the job (or that my old drive is damaged). The old drive to recover info from is a Western Digital 500G/7200rpm SATA drive if that is relavent. Both the original laptop and the one I'm using for recovery are running Windows 7. Does anybody have experience with using a blacX enclosure to recover data off an already formatted drive?

    Read the article

  • Can I use HP Recovery Discs for a different hard drive capacity and make?

    - by Fasih Khatib
    About two years ago I created HP Recovery Discs (3 of them). Now my hard drive has crashed and new one is still a week from delivery. I was reading up on how to reinstall the genuine OS using the Recovery Discs as i was not given any Windows 7 installation discs. I did my bit of research after getting answers from the community on what these discs do and found out on other sites that people experience issues when recovering their OS from the disc. Especially when they change the make or capacity of the harddrive. Unfortunately I had to change the make as the hard drive that came built in has gone out of production. This question is just a part of my checklist to avoid problems when recovering the OS. I have: HP DV4-2126TX (available only in India I guess) I had: Seagate Momentus 320 GB I ordered: Western Digital Scorpio Black 500 GB Windows 7 Home Premium 32-bit Is there a possibility to encounter any problems due to the changed capacity and make? I only want my genuine OS and drivers – not my data. I was told that Disc 1 contained the OS and drivers, and the rest of the discs contained data. I couldn't verify that.

    Read the article

  • Matched or unmatched drives for RAID arrays?

    - by Will
    Looking around there is conflciting information on this, with some strongly suggesting one or the other. From my understanding the issue with matched drives is that the wear on both drives is more or less the same, so the potential for the second drive failing with or very soon after the first is pretty high. People also claim matched drives give substianatally higher performance however assuming the unmatched drives are more or less the same (eg 2, 1 TB STATA II 7200rpm drives with 32MB cache), would the minor differences between say a Seagate and a Western Digital one (say one has a 128MB/s read rate, and the other a 150MB/s read rate, as well as I guess various other minor differences) actually cause any notable performance loss, ie potentialy worse than two matched 128MB/s drives, or does RAID not really care and give you essentially an optimal solution (eg upto 278MB/s total read speed for RAID 0 and 1) and similar for other RAID with more "unmatched" drives (5 and 1+0 come to mind as possibilities)? Also I couldnt find much info on how this is different on different RAID setups, eg RAID 0 or RAID 1, software or hardware RAID, etc. I'm assuming such things have an effect, and thats it's not all the same for RAID in general?

    Read the article

  • Dropbox picture sync: Skip RAW files?

    - by Steven Lu
    I like the convenience of having Dropbox keep track of my photos because it tends to work with my devices over 3G (I am often tethering to my phone with my iPad and Macbook) as well as Wifi, but it's a waste of network traffic to sync the raw files from my camera or memory card. It clutters up the dropbox list and the files are just huge. Is there a way to configure the Dropbox client so that it ignores a certain file extension for the picture sync? Also, I suspect that if I just go and delete the raw files, that the next time I plug in the memory card and tell Dropbox to sync, it will re-download the raw files. Which would be terribad. I could switch to iCloud for Photo Stream, I suppose, but there will be no access via 3G that way. And I've already got years of experience with Dropbox so I know it's going to just work. I think any method that works for filtering files to exclude from sync on Dropbox in general should work here too. Edit: Wow there are 19k votes for this exact request.

    Read the article

  • Can Windows Media Player create playlists based on folder structure?

    - by Chaulky
    Over the years I've carefully molded my digital media collection into a series of folders that make it easy for me to find what I'm looking for. I recently discovered the awesomeness that is streaming video from Windows 7 Media Player to the PS3 so I can watch it on the big screen without all the hassle of hooking the computer up to the TV. The problem is, I totally lose my carefully crafted folder structure and all my videos become one giant mess again... not cool! As a temporary solution, I've created a few playlists for my favorites (Dexter Season 4, Dexter Season 5, Breaking Bad Season 1, etc.). This is a HUGE pain in the a$$. So, is there a way to get Windows Media Player (on Windows 7) to maintain some sort of folder structure based on the location of the actual video files? So if I have my videos sorted into folders by show and season, Media Player will pick that up and let me browse it in the same way. As an alternative answer, I'll accept suggestions for a program that can also stream to PS3 and has this "folder organization" feature.

    Read the article

  • Windows 7 does not detect my new hard drive?

    - by jasondavis
    I just built a really nice new PC. Some specs... Intel i7-930 CPU ASRock Extreme X58 motherboard with sata 3 and USB 3.0 12gb of G-Skill DDR3 RAM 80gb Intel G2 Solid state drive for Windows 7 and other programs to run on Windows 7 Pro 64bit OS 2 1gb grapghic cards for 4 monitor support Thats the main components. Well today my new 1tb western digital hard drive came which I plan to use for data to preserve the life of my SSD (hopefully). I hooked up it's sata power input and then hooked up it's sata data cable to a sata 2 port on my motherboard, I boot windows 7 and go into my computer and the drive is not showing up with my other drives. I then re-boot again and check again, no luck. I then shut down the PC and open the case back up, I then check my connections and they all look good. I then boot up and I can see the new HD is on and spinning. I then go into my BIOS settings to see if it registers there and it DOES! It shows I have a WD 1tb hard drvie on sata 2 port 6. So I am at a loss of why it is not showing up as an option in windows? Windows acts as if the drive is not there. Please help

    Read the article

  • Can Windows Media Player create playlists based on folder structure?

    - by Chaulky
    Over the years I've carefully molded my digital media collection into a series of folders that make it easy for me to find what I'm looking for. I recently discovered the awesomeness that is streaming video from Windows 7 Media Player to the PS3 so I can watch it on the big screen without all the hassle of hooking the computer up to the TV. The problem is, I totally lose my carefully crafted folder structure and all my videos become one giant mess again... not cool! As a temporary solution, I've created a few playlists for my favorites (Dexter Season 4, Dexter Season 5, Breaking Bad Season 1, etc.). This is a HUGE pain in the a$$. So, is there a way to get Windows Media Player (on Windows 7) to maintain some sort of folder structure based on the location of the actual video files? So if I have my videos sorted into folders by show and season, Media Player will pick that up and let me browse it in the same way. As an alternative answer, I'll accept suggestions for a program that can also stream to PS3 and has this "folder organization" feature.

    Read the article

  • Microphone array support in Windows. Info on performance and compatible hardware?

    - by exinocactus
    It is officially claimed by Microsoft (Audio Device Technologies for Windows), that Windows Vista has an integrated system-level support of microphone arrays for improved sound capturing by isolating a sound source in target direction and rejecting ambient noise and reverberation. In more technical terms, an implementation of an adaptive beamformer. Theoretically, microphone arrays with 2-4 mics can substantially improve SNR under some conditions like speaker in front of the laptop in noisy environment (airport, cafe). Surprisingly, though, I find very little information about commercially-available products supporting these new features. I mean products like portable usb micropone arrays or laptops or flat screens with integrated mic arrays. I could only find info about two laptop models having "noise cancelling digital array microphone". These are Dell Latitude and Eee PC 1008P-KR. Now my questions: Do you have any experience with the Windows beamformer implementation? For instance, in the above mentioned laptops. How well does it work? Are there any tests results available in the net or in print (papers?)? Do you know about other microphone array hardware? What could be the reason why mic array technology didn't get sucess Is there mic arrays support in 'Windows 7'?

    Read the article

  • Hard drive causing BSOD

    - by JoshIrving
    I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

    Read the article

  • Hard drive causing BSOD

    - by JoshIrving
    I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

    Read the article

  • Windows 7 explorer crashing trying to read external hard disk

    - by Mario De Schaepmeester
    I have a 1TB Western Digital hard drive which is almost full and last time I tried to plug it into my laptop, I got a Windows dialog saying "this hard drive needs to be formatted". I did not panic because I have experienced things like this before and I know it's often solved by simply re-inserting the drive. Now however, whenever I plug it in and try to browse it in explorer by going to "computer", the explorer process crashes after a while. I simply close explorer since it takes ages trying to read the disk and nothing happens. After searching on the internet, the best thing to do would be a chkdsk. I tried it via properties in explorer (which also took a good 5 minutes to open up), locks up as well, after waiting a couple of minutes it says there's no access to the disk so a chkdsk is not possible... I want to make clear that I always use safe removal before pulling out the USB cable. Last time however, safe removal just would not work and when trying to shut down Windows, the logoff screen just would not disappear (I've waited at least 10 minutes or so) and I powered off the PC by force. This may be the cause of the problems but the disk was still recognised immediately after that. I really don't want to format this thing because it contains C: clones of 3 computers and a lot of other stuff that I don't want to re-copy. What would be the best course of action? Update I got chkdsk working via the command line. I used the /F and /R options. I already got a bunch of lines saying "file record segment X is unreadable" or whatever it is in English, my OS is Dutch. It looks bad... Will chdsk repair these errors?

    Read the article

  • Debian 100% cpu every 30 minutes but not loggable?

    - by user654123
    I have a Debian 7 x64 machine running with Digital Ocean that has every 30 Minutes a 100% cpu usage for about 1 minute. A couple of days ago it stayed there for a couple of hours so the server finally crashed and I had to repair my Mysql databases. The server is a pure webserver running apache2 and Mysql. I tried tracing which processes use the cpu but with no luck. The script I used: #!/bin/sh while true; do ps -A -eo pcpu,pid,user,args | sort -k 1 -r | head -3 >> proclog.txt; echo "\n" >> proclog.txt; sleep 2; done I was monitoring htop as well while this was happening, but the top processess' cpu usage didn't add up to ~15% even though htop's cpu meter showed constant 100%. htop was configured to show all users' processess, user- and kernel-threads. Edit: By stopping Apache2 & Mysql prior to the expected 100% usage I can tell both are not responsible for it. The 100% usage occurred anyway. This is what the graph looked like the past hours:

    Read the article

  • How to automate downloading files?

    - by Damon
    I got a book which had a pass to access digital versions of hi-res scans of much of the artwork in the book. Amazing! Unfortunately the presentation of all the these are 177 pages of 8 images each with links to zip files of jpgs. It is extremely tedious to browse, and I would love to be able to get all the files at once rather than sitting and clicking through each one separately. archive_bookname/index.1.htm - archive_bookname/index.177.htm each of those pages have 8 links each to the files linking to files such as <snip>/downloads/_Q6Q9265.jpg.zip, <snip>/downloads/_Q6Q7069.jpg.zip, <snip>/downloads/_Q6Q5354.jpg.zip. that don't quite go in order. I cannot get a directory listing of the parent /downloads/ folder. Also, the file is behind a login-wall, so doing a non-browser tool, might be difficult without knowing how to recreate the session info. I've looked into wget a little but I'm pretty confused and have no idea if it will help me with this. Any advice on how to tackle this? Can wget do this for me automatically?

    Read the article

  • Using multiple USB webcams in Linux

    - by rachelderp
    Running more than one USB webcam in Debian/Linux results in the the following error: libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON: No space left on device What initially seemed to be a programming issue in OpenCV turned into a quest for a mysterious hardware/software problem after the same errors were produced by running cheese and xawtv. Apparently it's caused by webcams requesting all the available bandwidth on the USB host controller. With that in mind I decided to run wireshark and capinfos to see just how much bandwidth a single camera used. 4 megabits per second at 320x240 14 megabits per second at 640x480 32 megabits per second at 1920x1080 Interesting! That might explain why two cameras at 320x240 work but any higher resolution fails. It's as if my USB controller is only operating at USB 1 speeds, yet lsusb shows both webcams belonging to a device which supposedly supports 480 megabits per second. One solution proposed forcing the webcams to calculate their bandwidth usage instead of requesting their maximum by running the following commands: sudo rmmod uvcvideo sudo modprobe uvcvideo quirks=128 Unfortunately that made no difference, so I decided to try another solution. A post on StackOverflow suggested telling my webcams to use a lower FPS or compressed video format like MJPEG, but after running v4lctl list it doesn't appear either of my webcams support changing their video mode. And that's where I'm stuck. Why would two webcams operating well below the maximum speed of USB 2 would produce this error? ps: It's not a disk space issue, df displays no change when the webcams are started. pps: If it makes a difference, here's the output of lsusb

    Read the article

  • Why still use JPG compression? [closed]

    - by Torben Gundtofte-Bruun
    Back when the JPG image format was introduced, it made a lot of sense to reduce the file size, even accepting a loss in image quality, because files were being downloaded over a slow and expensive modem connection. In today's world, file size is no longer a concern, at least not regarding JPG where it seems silly to save 45kB on a photo. But my image editing apps still prompt me for the desired compression level when I save a file. Does it still make sense to go with the default 85? Why should I not crank it up to 100 for all files? Update based on comments: For web work, I might use PNG instead. But every smartphone and camera produces JPG files. The question arises when I save these edits. Audience is my own harddisk. We're talking photos, 2-5MB apiece. Chroma, subsampling, DCT - sorry, never heard of it. I'm a home user, not Photoshop guru. For the record, I use Paint Shop Pro on Win, and Gimp on Linux.

    Read the article

  • Unable to install drivers of any kind of device on windows 8.1

    - by saadj55
    Windows 8.1 is unable to install drivers. First, I wanted to install Android ADB drivers for my Chinese Android Phone. I downloaded the relevant drivers from the manufacturers site and enabled USB debugging on my phone and tried to install it but Windows failed to find any drivers in the driver folder. After searching on google, I got to know that I will have to edit the win_usb.inf file in order to install the drivers so I did the editing part also. Added these line: %SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C03 %CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C03 to both NTamd and NTx86 sections but the problem persists. Phone's current hardware id is: VID_0BB4&PID_0C03 I noticed that I need hardware ID with &MI_01 appended at the end. But Windows detects the device with the above hardware ID. I have the webcam drivers so I uninstalled WebCam Drivers to check if they can be installed back but I am also not able to install drivers for it. Windows is detecting the camera without that &MI_01 part. Please help. I cannot install webcam nor my android phone.

    Read the article

  • How can I get DVDs playing after a Vista to XP change?

    - by Liath
    I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

    Read the article

  • System Issues and Major Malfuctions after Failed hibernation Exit

    - by Sarah Seguin
    I have a HP G71-340US that went into hibernation mode for a while and when I tried coming out of it, I got an error message: You're computer cannot come out if hibernation . Status: 0xc000009a Info: A fatal error occurred processing the restoration data. File: \hiberfil.sys Any information that was not saved before the computer went into hybernation will be lost enter=continue So I hit continue and it ran soooo super slow it. It was seriously crawling. Finally I gave up and turned it off manually (IE press and hold the button). It's been a week or two since then and EVERY SINGLE TIME I have tried to to do ANYTHING it takes forever. When I say forever, I literally mean takes 5-7 minutes to load the internet, then the page itself, then to click a link, so on so forth. Eventually everything just goes not responding and I have to give up (4-6 HOURS later). I also cannot access my thumb/jump drives once I've managed to load windows. I was going to try runing malware bytes incase of a virus, but it's windows explorer developes errors and goes not responding on me. Currently I'm running scan disk or check disk and like every file is coming back unreadable. I let it run the last 2 hours straight in chkdesk and I'm only at 6 percent with around 500+ errors and still going. Yes, I've taken logs of the errors via cell phone camera and patience. A week or two prior to this happening I had to change our the hard drive due to blunt force trama next to the mouse. OH! Running on Windows 7: ) And I've tried loading the computer in safe mode and it makes absolutely no difference. Any and all help would be appreciated. I really don't know what to do from here and I'm kind of freaking out. I've googled different part of the error and things that I've done/seen and there are so many different answers/topics that I thought it best to just post the questions.

    Read the article

  • Removing Phantom Registry Entries

    - by shedd
    First, some background: I'm trying to install an HP OfficeJet 6500. I've got the printer setup on my network fine, but the driver software installation on Windows XP (SP3) is a PITA. The installation program keeps dying with the following error: Product: Network -- Error 1324. The folder path 'WD Sync Data' contains an invalid character. WD Sync Data is a program on external Western Digital harddrives, which I used to use on this computer, but no external drive is current mounted. I've searched my registry for those keywords, but haven't found anything. I also ran CCleaner on the registry just to make sure, but no loose ends detected there, either. There are a number of Google results for the error, but no solutions. One post pointed me to the Windows Installer Cleanup Utility, but this utility doesn't even run - it dies with the same error before even starting. Any thoughts on where I could look to clean up this invalid character so I can get the HP installation wizard to successfully run? Many thanks in advance!

    Read the article

  • Where can someone store >100GB of pictures online? [closed]

    - by sbi
    A person who is not very computer-savvy needs to store 130GB of photos. The key parameters are: an non-negligible probability that the company selling the storage will be existing, and the data accessible, for at least five years data should be considered safe once uploaded reasonable terms of service: google drive reserving the right to literally do anything they want with their user's data is not acceptable; the possibility that the CIA might look at those pictures is not considered a threat easy to use from Windows, preferably as a drive no nerve-wracking limitations ("cannot upload 10GB/day" or "files 500MB" etc.) that serve no purpose other than pushing the user to the next-higher price plan some upgrade plan: there's currently 10-30GB of new photos per year, with a tendency to increase, which might bust a 150GB limit next January ability to somehow sort the pictures: currently they are sorted into folders, but something alike (tags) would be just as good, if easy enough to apply of course, the pricing is important (although there's a reason this is the last bullet; reasonable data safety is considered more important) Nice to have, but not necessary features would be: additional features related to photos (thumbnail generation, album sharing etc.) access from web and other platforms than Windows (smart phones) Let me stress this again: The person in need of that is able to copy pictures from the camera to the computer, can copy files in the explorer, and uses a web email service. That's about it, there's almost no understanding of what happens under the hood.

    Read the article

  • My PC suddenly reboots

    - by ChocoDeveloper
    Yesterday I opened my PC hub (after like, 5 years) to add more RAM and a new HDD. It was full of dust and balls of fluff, so I cleaned it a bit by blowing. I also removed the fan that was attached to the motherboard (I think it's there to cool the processor) and I cleaned it also by blowing and with a paintbrush, then put it back where it was (it had 4 weird plastic screws, it wasn't easy). Then I added 2 x 2Gib of RAM (Kingston 1333MHz), and the new HDD (Western Digital Caviar Blue 1TB SATA 3). I couldn't find another wire like the one my first disk had, which was thicker, but there was one that was more flat, so I plugged it and it worked fine (I also plugged the wire that I think is for the data, which looks like many little wires glued together). I'm running Ubuntu 12.04, and in the new disk I've just installed Windows 7. Between yesterday and today, two reboots ocurred while working on Ubuntu. I haven't used Windows 7 that much so I don't know if it will happen there too. So where can I begin to debug this?

    Read the article

  • Noob with git repository on Windows Storage Server 2008?

    - by HibbyHoo
    I have a Western Digital Sentinel at home running Windows Storage Server 2008 R2 Essentials. I have several git repositories on it for my own personal projects, and have no problem pushing and pulling over my local network. I want to be able to access those repos remotely from anywhere. I am able to log in and remotely access folders and files on it, but I cannot clone repos using the same address. It hangs for a REALLY long time before finally failing with an error: git.exe clone --progress -v "https://myIpAddressHere/Remote/fs/files.aspx?path=%5C%5Cmydevicename%5Cmyreposfolder%5Cmyrepo.git" "D:\repo" Cloning into 'D:\repo'... error: Failed connect to myIpAddress:443; No error while accessing https://myIpAddress/Remote/fs/files.aspx?path=%5C%5Cmydevicename%5Cmyreposfolder%5Cmyrepo.git/info/refs fatal: HTTP request failed git did not exit cleanly (exit code 128) I'm not too privy to networking or web development, and I have only a rudimentary understanding of how to use git (with TortoiseGit). I'm having a hard time finding search results for this specific problem and a hard time interpreting generic tutorials for the general scope of this problem. TortoiseGit version: 1.7.13.0. git version: 1.7.10.mysysgit.1.

    Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >