Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 122/176 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• How do I make my Geforce GTS 250's power save mode stop causing audio stuttering?

  - by Matt

  Whenever my GTS 250 enters its power save mode, downscaling its frequencies, my audio stutters. This affects both my onboard audio and my Audigy Soundblaster 2 ZS. Changing Windows power save mode options such as PCI-E link state power management or Power Management Mode in the nVidia control panel have no effect on this issue. Replacing the power supply had no effect on this issue. The BIOS is the latest version, and I have the latest motherboard chipset and graphics drivers installed. I do not overclock. I started to see this issue after I upgraded my rig from its Socket 939 board to a Socket 1156 board with a Core i5-750 while simultaneously upgrading from Vista to 7.

  Read the article

• How can I access the external microphone with Ubuntu?

  - by Charles Merriam

  Sound in Ubuntu, it has its own special joy. I would like my external microphone to work. Symptoms: I can play sound through the speakers I can play sound through the headsets. Plugging and and plugging headphone output correctly switches. I can record from the built-in microphone, using "Sound Recorder" and others. but: I cannot record from the external microphone. My Sound Preferences/Input panel has no option for an external microphone. If the answer is upgrade the ALSA drivers, please say exactly what to type. Thank you. ======== I'm using Ubuntu 9.10 Karmic Koala on a laptop (Gateway W3501), Sigmatel. That is: ~$ head -1 /proc/asound/card0/code* ==> /proc/asound/card0/codec#0 <== Codec: SigmaTel STAC9205 ==> /proc/asound/card0/codec#1 <== Codec: Conexant ID 2c06 ~$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

  Read the article

• ubuntu 10.04 console resolution

  - by Ove

  I have installed Ubuntu 10.04 on my HP Pavilion dv6000 After I installed it, the text in the console (when I press ALT+F1) was small and the console had a good resolution (I think the same as my LCD, 1280x800). Also, at boot, the "Ubuntu" logo was small and centered in the middle of the screen. That was good. After that, I installed the nVidia driver via the "System-Administration-Hardware drivers" screen. After the driver was installed, the text in the console was larger and more pixelated, and also the "Ubuntu" logo was much larger and looked uglier because it was pixelated. Can anyone help me change the resolution in the console and boot screen back to what it was before I installed the nVidia driver?

  Read the article

• Lenova B460e laptop Unknown filesystem

  - by Dinesh

  I got Lenova B460e laptop yesterday (by TN Govt). It has WINDOWS 7 Proff….. Setup it up the way I liked it... all software drivers and all. I wanted extra drives, so I entered the WINDOWS diskadmin and changed my partition setup, by splitting and I did the partition setup in the installing proces, so I splitted my harddisk into 4 parts. So far so good. When I rebooted, I entered GRUB RESCUE MODE. In this mode I know the only command “ls”. Which gives like (hd0) (hd0,msdos5) (hd0,msdos4) (hd0,msdos2) (hd0,msdos1). In this Lap I do not have CD drive also, otherwise I could have done Format the OS and installed new OS using WINDOWS 7 CD. Now I don’t know what I’m supposed to do. Anyone an idea how to fix this?

  Read the article

• BSOD on windows 7 with SSD during boot after improper shutdown

  - by Bob

  I have a BSOD on windows 7 with SSD during boot after improper shutdown (while windows animation logo is moving). The computer restart imediatly after BSOD, and windows proposes to launch startup repair (if i do it, it takes +-5min and fixes the problem : computer starts normally). However, after any new improper shutdown, i got the same problem. Remarks: If i unplug, re-plug the SSD whyle system is shutdown, i have the same problem. If i reproduce the situation with old HDD, i havn't the problem Previously, i had a different problem: BSOD when waking up after sleep, which was fixed by installing drivers (ethernet, usb, graphic card) I have made ram chech and ssd check and found no problems Starting with safe mode after improper shutdown causes a BSOD at loading of classpnp.sys Configuration: System: HP compaq 8510p SSD: OCZ vertex-2 2.5 Boot options: SATA native mode - Enable, HDD transalation mode - LBA-assisted

  Read the article

• Dell Inspiron/Windows Vista sleep/hibernate issue

  - by sarge

  When I hit the sleep button in Windows the computer looks like it's going into Sleep mode but a few seconds later it's restarted, and stops with this error message: internal hard disk drive not found To resolve this issue, try to reseat the drive. No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics. The computer is running Windows Vista (SP2) and I have installed all available Windows Updates and the latest manufacturer drivers. I have already tried to reseated the drive, ran the onboard diagnostics and there were no errors. I have changed the power settings for all devices where it's available so that they are not allowed to wake up the computer. Any ideas?

  Read the article

• Would Firefox 3.5.8 freezing on Windows 7 indicate a problem with Windows WiFi driver or with Firefo

  - by Krystof

  I recently installed Windows 7 in spite of a lack of driver support from my laptop manufacturer but somehow Windows 7 seemed to be able to figure out what was needed - including the WiFi driver. But after I installed Firefox 3.5.8, I found that Firefox freezes frequently. When this happens the whole Windows interface turns sort of whitish like it's disabling interaction and, indeed, you cannot interact with anything in Windows. After a few minutes the freeze resolves itself and everything returns to normal. I scanned for viruses and ran the defragenter but nothing seems unusual besides these freezes. Anyone have any ideas what might be causing it and whether it's likely a problem with Firefox or with Windows - or perhaps with the hardware or drivers (WiFi driver?)?

  Read the article

• Free, Linux-based rescue CD for Windows machines

  - by Adam Matan

  Hi, Too often, I'm being called to help a friend who screwed a Windows machine by some creative methods. Th usual remedy is backing up the hard drive contents and reinstalling. Right now, this is done by removing the defected hard drive to my machine. I figured out that using a rescue disk running some version of Linux might ease the process. I'm looking for: NTFS access Partition tools Large variety of drivers (Network, Hard drives, etc.) GUI and some rescue wizards a great plus. Any ideas? Adam

  Read the article

• My Smart-Pad doesn't work, even when I activate it

  - by Darryn

  I have an Asus X5DIJ, and I have had it since Christmas. However, today, the Smart-Pad stopped working. I wasn't clicking anything, I was just typing. Someone suggested downloading drivers, and I'm not to good with guides, so can anyone assist me? Also, when I click on the Smart-Pad icon in the notification area, that icon is crossed out. There is a red X over it, no matter if it is on / off. Can anyone help me, this has happened to my cousin who has the same laptop as me, he now uses a mouse, but I'd rather keep the Smart - Pad.

  Read the article

• Can't initialize drive in Windows 7

  - by Abe

  I have a 2.5" laptop harddrive that I plugged into my laptop through a SATA to USB cable. It's powered by an adapter to a normal wall-plug. I want to use it as an external harddrive. It wouldn't initialize (Device is not ready), so as suggested in some instructions I found I uninstalled the drivers, unplugged it and plugged it back in. That worked, and I initialized the drive and formatted it. However I unplugged it after that and a few days later the same strategy does not work and I can't figure out how to use the drive. I can't initialize it and it doesn't show up in my computer.

  Read the article

• Ubuntu Wireless card not found

  - by user32121

  Hello all, I'm trying to setup Ubuntu on an old PC. I ran the following command, lspci, in order to get info on the wireless card installed. 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03) Does anyone know where I can get drivers for this card/chip? And also, how to install (I'm rather new to linux). Also, I'm sure the card is working because I just formatted over xp, and everything was working well. Thanks in advanced!

  Read the article

• Windows refuses to believe printer is online unless I delete and re-add it

  - by Marcin

  I have a Canon MP560. It is online, in the sense that (a) I can connect to its internal web server; and (b) if I delete the printer in windows (windows 7), and reinstall it, windows will recognise that the printer is online, and talk to it. In all other cases, the windows and mac computers (purchased last week, running whatever is the latest and greatest mac os) in my household will simply not recognise that the printer is online. The printer is statically configured to use the same IP address, so that's not an issue. Because the printer works just fine with windows after delete and re-add, I assume that the issue with the mac is that I haven't installed whatever drivers Macs need to talk to Canon printers over a network.

  Read the article

• Find BIOS update for HP Pavilion xt966

  - by NitroxDM

  I installed FreeNAS on a HP Pavilion xt966. Every three seconds or so I message comes up on the console. acpi_tz0: _TMP value is absurd, ignored (-270.2C) From what I have been able to find this is because of a bug in the BIOS... but I have yet to find an update for it. HP's site only shows drivers. FreeNAS is build on BSD. Anyone know where to find a BIOS update for this unit?

  Read the article

• Boot camp with Vista crashes on startup

  - by Mark Pim

  I have a 2006 vintage MacBook Pro (Intel Core 2 Duo) and have been using Boot Camp since it was in beta. I had been running XP SP2 on it with Tiger quite happily. I've recently wiped and reinstalled everything to upgrade to Leopard. After installing Leopard, I fired up the Boot camp assistant and used it to install the Windows 7 RC. That worked really nicely, but my HFS+ driver didn't work under Windows 7 yet so I decided to install Vista instead. I didn't repartition the drive, just launched the Vista installation disk from BIOS and told it to overwrite the existing Windows 7 install. It installed fine and I installed the Boot Camp drivers, still all fine. Now, however, every time I boot into Windows and login it hard reboots itself as the desktop is appearing. After this it works fine again. Until the next power off. Has anyone had any similar problems? Or can offer suggestions on how to solve this?

  Read the article

• How to achieve reliable Gigabit Ethernet Link with my Acer Aspire Revo R3610?

  - by The Operator

  I want to stream HD movies over my wired Gigabit LAN from my PC to my Acer Aspire Revo R3610. It's connected with a 3ft Cat5e patch cable to my Netgear GS605v2 Switch. The PC acting as File Server is connected at 1Gbps to the Switch. Network driver options are set to defaults, including automatic speed/duplex negotiation on both machines. The Revo will not connect to my Network Switch at 1Gbps - the OS reports that it reverts to 100Mbps either shortly after connection or immediately upon connection. Through a process of elimination (trying different drivers, patch cables, ports on the switch, and other 1Gbps-capable devices connected to the Network switch which successfully achieve 1Gbps links and performance) I have drawn the conclusion there is either a Hardware or Software (Driver) issue with the Revo itself. I have performed tests using Windows 7 and Ubuntu 9.10. Can anyone offer insight on Gigabit Ethernet with the Revo?

  Read the article

• USB-Sticks and multiple Partitions

  - by Bobby

  Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

  Read the article

• Unable to connect to network

  - by user33750

  Hey guys, I have a question. I have been having problems connecting a new netbook to my network at home. I have an Asus Eeepc 100HAB. I have tried to run a repair on the connection, uninstalled and re-installed the network card, made sure all of the drivers are up-to-date as well. Two caveats: I have a laptop that I recently switched to a wired connection because it wasn't connecting to the network as well, and the netbook connects to an unsecured network i found just fine, only having a problem getting into my home network. Passwords are correct, and the computer where the connection originates from is working fine as well. Any ideas?

  Read the article

• Mouse Icon Distorted on Secondary Display

  - by Nathan Taylor

  I have a strange issue with a dual monitor, extended desktop setup where the mouse is always fine on the primary monitor, but sometimes when I move to the secondary display the icon becomes garbled and distorted (sometimes it just looks like a vertical line, instead of a pointer). If I move the mouse back and forth rapidly between primary and secondary displays the level of "garbledness" of the icon will change and sometimes go away completely. If I switch the display settings and set it to "Duplicate Monitor 1" then I end up with a garbled icon on the primary display and an accurate one on the secondary. Very annoying. Computer is Windows 7 Ultimate with an HD8750 and the newest video drivers. Monitors are two Dell 24" displays connected via DVI cables. I have also tried VGA cables.

  Read the article

• How can I find out which driver/file is being loaded when the system hangs during the Windows 7 boot

  - by user24247

  My desktop computer (1 OS, 1 drive, 1 partition) hangs during the Windows 7 boot process. When selecting F8 I can select Safe Boot which allows me to see the files processed during the boot process. I know that the last line displayed is the last file that was SUCCESFULLY loaded. How do I find out what the next line, and the potential candidate driver/file/program would have been? The unusual thing, at least in my experience, is that the freezing up of the system also happens when I boot from the Windows 7 install disks, which is preventing me from any repair options. With a failure of both, I cannot not restore Windows 7 to a previous date or uninstall drivers/programs that may be the cause of the hanging. Thanks for your responses. Marc

  Read the article

• Hyper-V Ubuntu 10.04, Filesystem suddenly becomes Read-Only?

  - by Daniel Upton

  We are running a Ubuntu 10.04 VM on a Hyper-V system, The VM is dedicated to running one of our web applications. We have enabled the Hyper-V drivers in /etc/initramfs-tools/modules like so: hv_vmbus hv_storvsc hv_blkvsc hv_netvsc And updated the kernel image like so: $ update-initramfs -u And all was good... until.. This morning i got a support request that our web application was throwing an error 500, so i checked the logs and nothing was there. Then I remembered that I had seen this on another of our ubuntu servers so I... $ touch foo.txt And my suspicions were confirmed: touch: cannot touch `foo.txt': Read-only file system Why is the filesystem randomly becoming readonly? Is this only in Ubuntu on HV? Is it a problem on RedHat or Cent?

  Read the article

• Laptop hot after format

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Laptop hot after format

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• How to make sure Windows PC is reasonably secure?

  - by Coder

  I'm not much of a network and network security expert, but I need to add an existing Windows PC to a network with always on connection. The problem is, I have no idea if the PC is really clean, and, actually, no knowledge to check it. I scanned the PC with Process Explorer to verify if all running processes are signed, ran an AVG scan, but this is where my knowledge ends. IIRC, there can be bad code attached to svchost or something, bad drivers, and so on, but I have no idea how to check all those things. Reformatting the PC is unfeasible as of now. Are there any suggestions on what I could do?

  Read the article

• Debian on Hyper-V

  - by Tobia

  I installed Debian with kernel 2.6.32-5-686 on a Hyper-V virtual machine. I had to add a legacy network card. I follow this tutorial http://www.microsofttranslator.com/bv.aspx?ref=Internal&from=ru&to=en&a=http://blogs.technet.com/b/abeshkov/archive/2011/03/17/hyperv_5f00_debian.aspx to add Hyper-V driver but when I reboot with the new kernel it crash during bootup. Is there any other way to load hyper-v drivers? I really need to change that legacy network card because my debian machine is going to be used as proxy. Thank you.

  Read the article

• Non-OEM Biometric Software?

  - by Iszi

  Most of us with fingerprint readers and such devices probably use the software provided by the vendor, to enable biometric OS login or single sign-on functionality. However, I've recently wondered if there is any third-party software that will do the same thing. This would be similar to how you don't need the manufacturer's software to use a scanner, printer, or webcam - you just use their drivers and your choice of software. Is there anything like this for fingerprint readers or other biometric devices? Free or Open Source projects are preferred, but I'd be interested in learning about any existing solutions regardless. I personally am particularly interested in Windows-compatible software, but I'll leave the query open for any OS.

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >