Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 119/176 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

• dell u2410 3dMark Benchmark distortion problems

  - by Scanningcrew

  Ive been doing burn in testing for a new system I have put together and I am running into some video distortion problems with running the 3DMark benchmark tools (Both 06 and Vantage). The graphics will be fine, then sometimes during a test switch the screen will light up with thin horizontal ranibow lines (Something that looks very "glitchy") If i turn the monitor off and back on it clears up. All the tests "pass" and my system gets good marks but it concerns me if I might have problems with games (The screen returns to normal if I dont resest monitor and just let tests pass). I want to return a problem component now before its too late if it is something with the new hardware. Also, I am monitoring temp with thermal laser gun and the card itself is not going above 65c. Any ideas? System: Asrock x58 Xtreme - Last BIOS (1.80) EVGA Geforce GTX 285 w/ latest nvidia drivers (Connect via DVI1) Dell U2410(Set to 59hz refresh 1900x1202 -although I believe benchmarks run 1200x1024) Windows 7 Ultimate 64 12Gb DDR3 1600 RAM

  Read the article

• Universal Windows XP With Ghost and Sysprep

  - by RobertPitt

  Hey I have an idea but im not sure whether it is possible and looking for advice on how to accomplish this. If i was to try and deploy Windows XP Sysprepped image from a Lenovo Thinkcentre 6073-CTO and tried to drop it onto a Dell Optiplex for instance I would get a BSOD due to the hardware change. What im looking to do is create a few images like so: Windows XP x86 SP3 (Sysprepped) Windows XP x64 SP3 (Sysprepped) ... So that we can use throughout the organization without having to create individual images per computer type. Is there anyway's to accomplish this such as some modification of files pre-ghost, removal a certain drivers pre-sysprep Any advice is appreciated.

  Read the article

• Recover data from hard disk

  - by Hitesh Solanki

  Hi I have formatted my c: drive and window xp is installed successfully,but I cannot able to access d: drive. when I am trying to double click on the d: drive,following message is displayed: "the disk in drive D: is not formatted, do you want to format it now ? " When I am trying to access from command prompt,the following message is displayed: "The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted." So please help me.... Thanks in advance....

  Read the article

• Unable to make my bios see my sata hdd

  - by Stefan

  I know there are many question about that, but I tried everything and I'm still not able to make my bios see my sata2 hdd. I've got a QDI motherbord with no sata port; only 2 ide ports. I had an old ide hdd, now i've removed it and bought a sata2 hdd. Since my pc has no sata slots i bouth a ide-to-sata adapter. So, i don't have any os installed on the new drive, and the old drive is removed. My problem is that I'm unable to see my hdd on bios. I suppose that my bios, since it's an old version, doesn't have sata drivers, but I don't know if I must install it and also I dont know how to do it. Anyone can help me?

  Read the article

• Jerky animation on window open/close

  - by Jan Zich

  Today, I received and installed Windows 7, and one of the first (slightly) annoying things I noticed is a visible jerk when opening of closing new windows. When I minimize or maximize already running window, the animation is smooth from beginning to end, but when I start a new program, it seems that just at the end of the animation Windows thinks for a fraction of a second. It is a bit distracting; especially since Windows 7 seems to be overall more responsive than Windows Vista. Does anybody has the same experience? Could it, for instance, a 64bit version specific issue (just in case)? I upgraded Vidia drivers, and even though my video card is not capable running latest games, it should be able to handle this (since it was OK in Vista, and since it does not look like a video issue).

  Read the article

• Building a new PC, Installing XP, blue screen of death

  - by Tim

  I got a gigabyte barebones kit and am installing windows-XP(SP1) and the initial setup works, then it restarts and goes into the second phase of the setup. Then when installing components (I think that's what it says) it gets half way done and comes up with a blue screen saying IRQL_NOT_LESS_OR_EQUAL. BUT! I had gotten past that by installing windows-XP media center addition Now I am trying to install the drivers for my Asus ATI Radeon 5770 graphics card and I get another blue screen of death that doesnt give much info something about address x0000005. Would you think there is something wrong with something in my system or do you think if I got windows 7 that would take care of things? Sorry for probably not giving enough info. Here is what I have MotherBoard - Gigabyte S-series GA-H55M-S2(v) PSU - Ultra 500 watt atx HDD - Sata serial ATA Seagate Baracudda 7200 CPU - Intel i3 Memory - 4gig crucial Graphics Card - Asus ATI Radeon 5770 1Gig DDR5

  Read the article

• Graphics Startup Screen

  - by Wesley

  Specs: AMD Athlon XP 2400+ @ 1987 MHz / 2x 512MB PC3200 DDR RAM / 160GB IDE HDD / 128MB GeForce 6200 AGP / FIC AM37 / Windows XP Pro SP3 So, every time I start up my machine, there's a startup screen for the graphics card. It should display "NVIDIA GeForce 6200 VGA BIOS" with some other copyright information underneath it. However, it randomly changed to say "NV44A VGA BIOS." I think the GeForce 6200 codename is NV44A or something, but is there someway to change it back to say "GeForce 6200 VGA BIOS" or, if not, to completely stop it from showing upon startup? (Graphics drivers are all up to date.) Thanks in advance.

  Read the article

• Scan And Fix a RAW drive

  - by Claus Jørgensen

  Hi Basically I got the same problem as described in this thread. When I plug my HTC Hero Android Phone with USB into my Windows 7 computer I get a "Do you want to Scan and Fix" message. However, if I click "Scan and Fix", the USB instantly unplug itself, so that's no good. I've tried updating drivers from HTC with no luck. I've also tried running chkdisk from command-line with the message that it can't be used in RAW drives. This is really really annoying, and the SD card works just fine if I ignore the message, so I just want a way to disable/hide this message permanently. If anyone have some ideas how this can be done, please let me know. Thanks.

  Read the article

• Causes of hard crashes on Windows XP and how to debug

  - by Sam Brightman

  I am occasionally seeing hard lockups on XP: totally unresponsive to keyboard/mouse, screen freezes at time of crash, no SSH/VNC possible. Very intermittent, nothing in the logs. I never see a blue screen on any kind of error message. This morning I logged in via VNC, logged out again, 20 minutes later physically sat at PC and it crashed around the time of VNC logout. I tend to suspect video cards in these kind of situations but it's a modern-ish card with modern drivers (one revision back, but this has been happening for 5 revisions or more) and normally would at least see a blue screen I expect. What would you suspect? Where can I look or what can I set up for more information? Bear in mind that this happens about once every 3 or 4 weeks, so extensive logging or intrusive monitoring isn't really an option.

  Read the article

• Bluetooth Headset pairs and appears in Sound Devices, but shows as Disconnected?

  - by Mike

  I recently got a TrueBlue TB-100T3 and tried pairing it with my computer (Windows 7 64-bit). At first it paired but would not appear under Sound Devices. I updated my Broadcom Bluetooth drivers here: http://www.broadcom.com/support/bluetooth/update.php Now my headset appears in both Playback and Recording, but shows as Disconnected. The device is on, paired, and appears under Device Manager as having no problems. I right-clicked and installed both the Hands-free Telephony and Headset services. Here is an image: http://i.stack.imgur.com/vG2S7.png Right-clicking the device and selecting Connect does nothing. Does anyone have a solution? Thanks!

  Read the article

• How to fix choppy video with VLC player?

  - by Brian Ojeda

  When playing most movies in VLC player, the video feed is choppy. Furthermore, the sound is near perfect. Another catch is, this video issue wasn't always an issue. I use to play movies with no problem with video or sound. I can not pin point what has changed between the it use to work fine and the time it started being choppy though. I have an ASUS G73JW-A1. This system should be more than enough to handle the demand of playing HD videos. Movies that are normally effected are HD videos. These video range from 4 to 9 gigs. In addition, the videos are in MKV, MP4 (or M4V), and AVCHD (or M2TS) formats. I get the same results when playing move directly off my hard drive or off an external. Finally, all the drivers have been recently checked and updated if needed.

  Read the article

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

• Western Digital not recognized by Windows after power Outage on windows

  - by vikasde

  I have WD Essential Plus 1.5TB (formatted in NTFS). It was working fine under windows and mac mini. While it was connected to the mac mini, I had an power outage and now the HD is not being recognized under windows anymore. Now on the mac mini the HD is fine and I can see my data. When I use ActiveBootDisk under windows, then I can see the data as well. I updated the drivers on windows machine and also updated the firmware on the HD, but its still not being recognized. Is there any way for me to fix the HD under windows without having to re-format it?

  Read the article

• How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

  - by pratikk

  I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

  Read the article

• PC doesn't select right monitor sometimes

  - by Madhur Ahuja

  I have an ACER LCD monitor with Intel G33/G31 display chipset. The preferred resolution for monitor is 1440x900. The drivers for both monitor and display are correctly installed and displayed in Device Manager section. However, I have observed, sometimes, in Display properties, my PC shows Display Device on: VGA instead of Display Device on: Acer , and when that happens, the resolution becomes distorted and I am unable to switch back to 1440x900. However, this problem resolves itself automatically sometimes between reboots. Any idea what's going on ?

  Read the article

• HP LasterJet P2035 not mapping on remote desktop

  - by Matthew Pomar

  I am connecting from a Windows 7 Pro laptop to a remote 64bit Windows 2008 R2 server via Remote Desktop. My local laptop has a networked HP LaserJet P2035 printer set as the default printer. When I connect to the server, the local (networked) HP printer does not get mapped on the server. I've installed the 64bit drivers from HP for the printer and was able to create a test printer on the server itself using the correct driver (HP LaserJet P2035) priting to a file. I've also checked the Printer under Local Resources tab on my Remote Desktop client. Does anyone know where else I should check to get my local printer to make to my remote desktop session?

  Read the article

• Are mobo raid controllers based on Intel ICH10R southbridge still considered software Raid?

  - by Breadtruck

  So do you still need specific software/drivers (intel matrix?) installed to manage the raid controller, setup the array. If the raid chipset is on-board the motherboard and it uses the CPU, and say I am using a Core 2 Quad Q9550, would a hardware based card still out perform the motherboard chipset? This is for a home workstation and I could spend $300 on a areca ARC-1210 PCI-Express x8 SATA II but I want to be able to justify the money for the raid card. My motherboard is a GIGABYTE GA-EP45-UD3P UPDATE: I was going to RAID5 using 4 500 GB drives, and I was going to buy a controller card but this article got me thinking hmmm....Toms-Southbridge Battle

  Read the article

• Can't access some websites with any browser

  - by Charles Kingsmill

  I'm running Windows 7 64-bit on a new Samsung laptop and accessing the internet okay via ethernet cable to my university's ISP. Some sites work fine (e.g. google.com) but I can't access others at all (microsoft.com, topshop.com). I can't connect to those sites in safe mode with networking. And ping and tracert both fail. There's no proxy. Other users can connect successfully to these sites using my cable and socket. I've tried all the following with no success: using various browsers (IE9, FF, Chrome) creating a new user updating drivers clearing the DNS cache using OpenDNS and Google's DNS turning off Avast tweaking the MTU running MS malicious software removal tool running Spybot S&D reviewing the hosts file disabling the IPv6 options repairing / resetting winsock settings disabling advanced javascript options I have run out of ideas... can anyone see anything I've missed??!

  Read the article

• HP 1210 Scan Button does nothing.

  - by Jack M.

  I have an HP 1210 all-in-one nightmare of a printer which has decided not to listen to the scan button anymore. I've dug into it, and see in the properties of the scanner in Windows XP that it says "No applications are registered for this event" under what to do when the Scan button is pressed. I've tried re-installing the HP software, didn't help. Updated the drivers off the website, and downgraded them to the ones on the CD, neither had an effect. Is there any way to tell Windows to just open the Scan/Cammera wizard when I press the Scan button on the printer? Windows XP SP3, if that matters.

  Read the article

• Customized windows xp installation

  - by user23950

  How to create a customized version of an xp installation cd. I want a hand's off installation that will install all the themes, drivers , and applications I need without my intervention. How can I do that. I tried to make use of this software called Nlite. But when I tested the iso file using virtual box. The virtual box said that there's a certain file that cannot be copied. And by the way, before I customized the original iso image of windows xp sp3, it doesn't have the file copying problem that I mentioned above.

  Read the article

• OpenSolaris with no gcc vs. Nexenta with no ext3

  - by Jake Wharton

  I'm attempting to migrate my server from linux to a Solaris variant during a hardware upgrade. The machine is based around an Abit AN-M2 board which has an NForce chipset. I have what seems to be a chicken-and-egg problem of sorts: OpenSolaris 2009.06 does not recognize the NIC and I cannot compile the drivers for it as it also lacks gcc. I haven't tested as to whether or not I can mount an ext3 partition yet but its moot if there is no networking. Nexenta 3.0b3 recognizes the NIC but I cannot get the ext3 drives mounted due to FSWfspart refusing to install. I do not know much about Solaris but I wager this is due to the fact that Nexenta is based around Debian as well. While I am reusing the mobo/CPU combo, I did just spent a lot of money on the other hardware around it and would very much like to get it up and running smoothly and quickly. Does anyone have any suggestions that are not: Get a new mobo/CPU Run another OS Use alternate NIC

  Read the article

• Backup VSS Issues

  - by MJ

  I've got this server, and we've been having VSS issues for quite awhile. We've tried every form of re-registering the VSS drivers we can think of. NTbackup won't run a system state backup vssadmin list writers doesn't list anything. We're getting VSS error 12302 in the event log. Has anyone ran into a situation like this before? We're thinking the next step, if possible, is a complete reinstall of the VSS. Any other ideas?

  Read the article

• Laptop hot after format

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Laptop hot after format

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Touch Screen Ubuntu 10.04LTS

  - by WalterJ89

  I'm trying to get a touch screen working with Ubuntu 10.04LTS (64bit) -it is a serial touchsceen, connected at /dev/ttyS0 ,i know that works because I get garbage in the terminal when I enable it. -before the screen used a 3m driver (I believe) in XP. My knowledge of Linux is passive so I generally pick up something when I need it. To get this working I came accross a lot of tutorials (a lot outdated a bit), I'm still at a loss to get this work. I'm not sure where to put linux drivers (/usr/ or /dev/?) most tutorials kind of skip over that part. I have tried editing the /etc/X11/xorg.conf unsuccessfully. I'm not sure what the syntax for that is supposed to be. Thank You

  Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >