Search Results

Search found 4141 results on 166 pages for 'router'.

Page 122/166 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• Linux Bridge, Samba netbios name/hostname access

  - by Christopher Wilson

  I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

  Read the article

• Discover MAC address

  - by Kami

  I've to setup a bunch of server ! I need to discover their mac address with the following situation : MacBookPro >----------< Server I'm directly connected (not behind a router/switch) to the server. I've no clues about the ip address the server is using as default setup. I can't use a display connected to the server displaying its newtwork card config. How can I discover the MAC address of the server network card ? I'm looking for a command line tool. If something exists in MacPort it's also ok !

  Read the article

• Can Time Capsule backup its own network share or can Time Machine be setup to do so?

  - by Sam Brightman

  Apple's Time Capsule can act as both a backup drive and a network shared drive at the same time. Can it backup its own data to incremental backups? I can't find this information anywhere. I've not used Time Machine so I don't know if it can be configured to backup shared drives (independently of whether Time Capsule has the option). I would like this to be a feasible way of freeing up some storage on an older MacBook Air by keeping large media such as photos archived on the drive like you would a USB external drive. But having the only copy accessible throughout the house and not backed up would make me nervous. I like the idea of having a good router, network storage and backup in one box, although obviously it's safer to backup the Capsule itself to USB occasionally too. Other solutions to this are of course welcome if this is not possible.

  Read the article

• Mails bounce because of invalid character ('@') in username

  - by user1598585

  I have a working exim setup with virtual users, working alright, except for when I try to send email to certain servers. These servers reject my emails because of #5.1.3 Invalid character ('@') in username. The offending header parts seem to be: Return-path: <"[email protected]"@smtp.example.com> and ...(envelope-from <"[email protected]"@smtp.example.com>)... The problem is that I cannot find where and why the usernames are being generated like this. My router for submission is: dnslookup: driver = dnslookup domains = ! +local_domains transport = remote_smtp ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 no_more And the respective transport: remote_smtp: driver = smtp What can be producing this problem?

  Read the article

• Create 301 Redirection in Amazon Route 53 for Wildcard Subdomains

  - by Eric Yin

  My domain name hosted on Route 53 DNS. Amazon has a guide to do 301 redirection for www. To naked domain by point www. version to a S3 static website with 301 setted up. My question is, how can I have *.domain.com all have 301 redirec to naked domain name. I guess either: Some way to get all wildcard subdomains end up into one S3 bucket, how? Or: Use CloudFront on the www. version S3 site and put wildcard subdomains on the CloudFront, but how? Or: There's some hidden settings just lies on Router 53, then where? Or: use EC2, better not suggest me this, too costing for this task. Please advice.

  Read the article

• How can I find a computer on my network that is doing mass mailings?

  - by Alex Ciarlill

  I was notified by my isp that one of my machines is sending out spam. This happened about 3 months ago on windows machine running cygwin that was hacked due to an SSH vuln. The hackers setup IIS and SMTP. I cleared out the machine and all the services are disabled so I think that machine is okay I am wondering if there is any other way to identify which machine it could be coming from? The ISP has NO useful information such as source port, destination port, destination IP... nothing. I am running DD-WRT on my router, Windows 7 PC and a Windows XP PC.

  Read the article

• Ethernet switch not working

  - by Froskoy

  I've just tried using two different ethernet switches on my network to replace an 8-port Netgear gigabit ethernet switch, which works fine, but doesn't have enough ports for what I need. Computers are connected to a TP-Link TD-8840T router via a switch. They use DHCP for IP address assignment. One switch is a TigerSwitch 6924M, which I'd expect to be difficult to set up, since it is second hand and has an advanced configuration menu, which I can't access without a serial port. However, the second switch that I tried is a new TP-Link TL-SF024, which doesn't appear to have any configuration options, so that can't be the problem. When I say "not working," I mean that although they display that they are connected to a network, they cannot access the internet. For example commands like "ping -c10 google.co.uk" come up with 100% packet loss. What could be causing the problem and how do I fix it?

  Read the article

• How to do simple multitasked loop processing over filenames with PowerShell?

  - by Ville Koskinen

  I'm batch transcoding some 50 GB of video files on a USB hard disk which is connected to a wlan router. The drive is mapped as a network drive on my Windows 7 laptop. The speed handicap of the wlan causes some parts of the processing to become unnecessarily slow, so I would like to do the following with PowerShell: List the names of the files on the network drive to be transcoded Copy the first file to a temporary folder on my laptop Simultaneously Transcode the file in the folder Begin copying the next file from the network drive to the temporary folder After transcoding and copy have both ended, Delete the file which has been transcoded from the temporary folder Begin transcoding next file in the temporary folder Loop until all files have been processed How would I be able to do this with PowerShell? The multitasking part is an obstacle for my skill/persistence combination.

  Read the article

• Not working WEP key in Ubuntu

  - by stupid-idiot

  This time I've got some problem with connection to the internet from my old laptop with ubuntu, I already had some problems with setting up the radio on my network card but I think it works now since it finds some wireless networks. The problem is that I can't connect to my router via wi-fi even if I'm hundred-percently sure the wepkey I punch there is correct, it works via LAN though. Also, I'm not able to ping myself with 127.0.0.1. I'm sorry to say it but I don't think I can stand this shitness for much longer. Although it's much much faster than Windows it's useless since i can't download any libraries for development. If anyone has any experience with this, even indirect, please leave your answer or comment thx

  Read the article

• How to share computer's internet connection among network users

  - by RBA

  I wanted to connect to internet from my mobile through laptop wireless-broadband internet connection.. For that I have gone to Network Places, there i have done appropriate settings for "Wireless Network Connection" and "Bluetooth Personal Area Network Connection",, but that Bluetooth connection is still not showing connected.. I have checked the option for "Allow other network users to connect through this computers Internet connection", but still my Bluetooth Connection is still showing not connected.. Please help me out,, as to how can i achieve the same,, as i am having Broadband internet connection, which comes wirelessly to my laptop through a router/modem..

  Read the article

• Internet connection very slow after Linksys configuration

  - by NLV

  Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

  Read the article

• Problems using PC as a media server with PS3

  - by Tiger

  I recently got a PS3 and decided to take advantage of the fact that it can be used to stream movies by making my PC a media server. I've done this in the past with the same router I have now before I sold my old PS3, but not on this PC. I've tried using both Tversity and PS3 Media server, but I don't think the problem lies within the configuration of either of those programs because I am unable to ping the PS3. This problem only occurs when I am using a wired connection on my pc, attempting to connect to a WLAN connection on the PS3. If I switch to WLAN on my PC I can successfully ping the PS3 and connect to the media server. Thanks

  Read the article

• Win7 Prof. Computer won't wake on lan via Magic Packet from outside network

  - by Michael

  Hi all. I just purchased a new computer running Windows 7 Professional x64. I'd like to save power by having it sleep after an hour, but I would also like to be able to Remote Desktop into it at my leisure. I set up a static IP and have port forwarding set up on the router. If the computer is awake, the RDP connection works just fine. I downloaded and installed Wake-On-Lan thanks to this article If I put my new computer to sleep and send the magic packet from my old computer inside of my home network it wakes up. If I do the same thing, however, from my work computer outside the network it does not. I figured the Firewall was blocking the incoming traffic, but nothing in the Windows Firewall logs points to this happening. I'm wondering if anyone has any suggestions or any tests I can run through in order to narrow down what the problem might be. Thanks in advance for any help you might be able to offer.

  Read the article

• Wake on Lan/Wan won't work after some time has passsed

  - by Vian Esterhuizen

  I have the following set up: Gigabyte Z77X-UD5H Wake On Lan Enabled Asus N66U Port Forwarding Static IP assigned to my computer Windows 7 Advanced Power Management - PCI Express - Off Intel 82579V - All options under Power Management checked I'm trying to set this up for Wake on Wan capabilities. If I shut down my computer and immediately try to Wake on Wan (and Lan) it works and starts up. While the computer is on, I've used a few WOL specific packet sniffers and the packet comes through on the correct port. After any period of time over a few minutes, waking on Wan or Lan won't work. The back "activity" light is blinking on my ethernet port on my computer, as well as on the router, so I would assume the network card is on and able to receive a signal. Any ideas? Suggestions? What can I do to troubleshoot the problem?

  Read the article

• How do I send email with sendmail to external hosts?

  - by Jake

  If I wanted to send an email to a user on the same linux machine, I can run: echo -e "Subject: Foo\n\nBar\n" | sendmail -v jacob But if I run: echo -e "Subject: Foo\n\nBar\n" | sendmail -v [email protected] It will give me the error: 050 >>> MAIL From:<jacob@mu> SIZE=321 050 550 5.1.8 Cannot resolve your domain {mx-us011} If my machine has access to the internet but is behind a router and has no domain associated with it, can I use sendmail to send mail to this address? Do I need to connect through an SMTP server? Can I do that with sendmail? If I use sendmail's -f option and put my gmail account there it will work. Can (or should I) I use my IP address? echo -e "Subject: Foo\n\nBar\n" | sendmail -v -f [email protected] [email protected] I'm a bit lost on how all this comes together in sending mail from the command line.

  Read the article

• Crossover cable in addition to normal network connection on servers?

  - by Zero0ne

  I have 2 servers, both with Windows 2003 R2 Each have 2 NIC ports that are 10/100/1000 They are both connected to our LAN + joined to the domain (1 NIC port free on each server) The problem is that our main router is only 10/100 on the ports that these servers are connected to. Since one server is going to host SQL 2005 and the other will be running Altiris NS7, I was hoping that I could use a crossover cable to connect the two directly, thus taking advantage of their 1gbps NIC cards. Is this possible? If so what steps do I need to take to accomplish this? What needs to be done to make sure that when the app server is communicating with the SQL server that it is using the direct link vs traversing the LAN? Thanks a lot!

  Read the article

• Recover from running "route -f"

  - by James L.

  I was trying to capture localhost traffic with Ethereal, which doesn't work without re-routing localhost traffic to your router gateway. I didn't get the route command quite right, and messed up my routing table. I typed route -f to clear the routing table and rebooted, but when I finished rebooting, the routing table wasn't restored to its original state. I didn't use the -p parameter, so none of my changes should have persisted after a reboot. What can I do to restore the routing table to its default routes?

  Read the article

• Port Forwarding: Why do my local sites on 80 work but not those on 8080?

  - by Chadworthington

  I setup my router to forward port 80 to the PC hosting my web site. As a result, I am able to access this url (Don't bother clicking on it, it's just an example): http://my.url.com/ When i click on this link, it works: http://localhost:8080/tfs/web/ I also forward port 8080 to the same web server box But when I try to access this url I get the eror "Page Cannot be displayed:" http://my.url.com:8080/tfs/web/ I fwded port 8080 the same way I fwded port 80. I also turned off Windows Firewall, in case it was blocking port 8080. Any theories why port 80 works but 8080 does not?

  Read the article

• Vlan and Switch setting - dummy

  - by Andras Sebestyen

  I need to speak tomorrow the network engineer and I would like to understand his so apologise for the Dummy question: In the school we have a cab with a 24 port Netgear manageable switch with an admin and curriculum VLAN settings. Usually, as I over heard, in the morning and around 4.30pm there are a slowdown period on the computers which connect to this switch. No one could track this back yet. Questions: What is the best way to track back this slowdown Would it be a temporary solution to physical separate the two network with 2 switches If that would work how can I link them together to be able to see the curriculum from the admin side. Do I need an extra router then? Too many questions but I have no clue where to start and the gentleman will be paid by hours... can you see where I am coming from?:) Could you guide me in the right direction please? Any comment would be appreciated and please send links if you down vote the question:)

  Read the article

• How to build a small network/server at home, basics

  - by Moe

  I'm one class away from my BA IT, I took several classes in general IT. Out of all the books I found just two to be really beneficial. I'm trying to get the hands on experience so my question is.... I want to build a small network in my home, wireless and also wired; printer, laptop, desktop, server (I have 4 1TB external drives of movies/music I want to be available to all computers) Where would I start from building a server with my hard drives, good modem, router, switch port, firewall internet speed/connection etc. This is my first project I want to try.

  Read the article

• How to give virtual machine access to the Internet, but block from LAN?

  - by Pekka

  I am setting up a virtual machine using Microsoft Virtual PC in Windows 7. The VM will run a Windows XP. I want to set up a public-facing server in it for web pages, subversion and other things, and instruct the router to port forward any requests to that Virtual Machine. I managed to do that - I assigned the VM to the network adapter, and it is now acting as just another DHCP client - but to increase security I would like to block the VM from the rest of the LAN, so it accepts only incoming connections from the Internet. For this to be effective in case of a compromise, it would have to happen on VM level as far as I can see. Can this be done?

  Read the article

• What is the best way to setup a public and private wireless access point on the same home network?

  - by Dougman

  For my home network (with internet provided from a cable modem) I would like to setup a secure wireless access point that I use for all of my personal connections (home PC, iPhone, Xbox, etc) and also another public access point that friends and folks in the neighborhood may connect to (for good karma). I want to ensure that my private traffic cannot be accessed from users of the public access point. I currently have one router that is running the Tomato firmware that I use with WPA security. What is the best way to accomplish this kind of setup securely (if it is possible in a home environment)?

  Read the article

• switch's mgmt-ip is not remotely reachable.

  - by RainDoctor

  Switch model: Netgear FSM7352PS mgmt-ip: 192.168.1.100/24 Vlan id: 1 (default) There are couple of hosts in this Vlan: 192.168.1.2 (esxi console), for instance. 192.168.1.1 is the firewall/router interface. I can ping 192.168.1.1 and 192.168.1.2 from other vlans, say, 172.31.0.0/24 I can ssh to 192.168.1.2 from 172.31.0.0/24 I can't ping 192.168.1.100 from 172.31.0.0/24 However, I can ping 192.168.1.100 from 192.168.1.2 or from my laptop connected to that vlan (192.168.1.11). I can connect to the web GUI from my laptop when I am in that Vlan. Can anyone shed some light on why I am not able to connect from other vlans?

  Read the article

• How to set up Windows server 2008 to receive email?

  - by Saul

  First off apologies, I'm from a medical background not a networking one, but I've got roped into setting up a windows 2008 server. So far web server running, fixed IP address assigned (within a large private network of the National Health Service in the UK if that makes any difference) and the network team have assigned a DNS entry for me which works, so the server can be addressed as nww.myserver.nhs.uk I've only got ports open on the router for 80 and 443 (http and https) at the moment, so presume I need a different port to enable email services. My need is to be able to accept an email to the domain name like [email protected] in order to pick up a confirmation mail from an SSL issuer (Comodo) I guess to confirm that I control the domain. After that I don't actually need mail services on the server. I see lots of stuff about setting up SMTP services but thought that was about mail out and re-routing, but how do you get the server to "listen" for mail to the domain (assuming I open port xyz or whatever it is) ?

  Read the article

• Windows File Sharing - Long Initial Delay

  - by Isaac Sutherland

  I have two Windows 7 machines connected to a router. I created a shared folder on machine A, and I can access it from machine B. The transfer speed is great. However, there is sometimes a long initial delay when I try to access the shared folder from machine B. I'll click to open the folder, and windows explorer pauses for a few minutes before actually loading the contents of the folder. After it loads, however, I can navigate the subfolders and edit files with no noticeable delay. Then, some time later, I will get the huge delay on saving a file, after which subsequent saves have no delay. What is the problem here, and how can I fix it?

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >