Search Results

Search found 4161 results on 167 pages for 'desmond lost'.

Page 123/167 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

  • Internet keeps connecting and disconnecting

    - by OmerPT
    I have a PC running 32bit Windows 7 Professional. My wireless internet card is Edimax EW-7128G, it is inside my computer case and it is connected to an antenna. My problem is: I have a wireless connection to my router, the signal is fine and it's not slow or anything, but it just keeps disconnecting every 30 seconds or so, then connects back, then it disconnects, then connects back and so on. This is new - it only started about a week ago, everything worked just fine until then. I know it's not a problem with the router because: Other computers can connect to it easily and they work just fine, no disconnections (My phone too). I know it's not a problem with the computer or the wireless card itself because: I have Ubuntu installed side-by-side with my Windows, and when I switch to Ubuntu the internet works great. This caused me to think it's probably a problem with the wireless card drivers installed on windows (Ubuntu auto-installed them, I installed them manually on windows): I tried uninstalling them, and then installing them back again, sadly that didn't help. I'm kind of lost here - can anyone think of anything else I should try? Thanks :)

    Read the article

  • Recover deleted folder form bookmarks bar?

    - by OverTheRainbow
    I googled for this, but didn't find an answer. I removed a folder in Google Chrome's Bookmarks bar. Chrome says nothing when doing this, and I assumed it wouldn't actually delete the data from the Bookmarks manager, just the folder in the Bookmarks bar. Turns out I was wrong, and now I lost hundred's of URLs. I closed and restarted Chrome since then, so data is apparently no longer on disk. Since Google Sync is on by default, it says I have "536 bookmarks", I installed Chrome on another computer, logged on to Google... but the folder is still gone. I can't believe Chrome doesn't prompt the user with an obvious message for something that important. Is there somehow a way to recover a folder removed from the Bookmarks bar? Thank you. Edit: Amazingly, Chrome doesn't 1) provide a way to remove an item from the Bookmarks bar without also deleting it from the Bookmarks list, and 2) doesn't even warn the user of the consequences when doing so! The only way to recover data is: if you haven't closed the browser yet, make a backup of the Bookmarks file, close the browser, replace the now-leaner Bookmarks file with the previous version, and restart Chrome if you have closed it, recover the file from your backup. You did backup that file, right? ;-)

    Read the article

  • How to Find Out Who Made an ISO Disk?

    - by Qwertyfshag
    If a file is saved using Microsoft word or some other type of program, you can right click on the file to find the properties, which will indicate the computer that created the file. Is there anyway to find out who created an ISO disk image on a CD or DVD? I assume that there should be no meta data on the disk because an ISO disk image should be an exact duplicate of the original. Is my assumption correct? To illustrate with an example, let's say you found a CD at a cafe or something. You decide to look at the CD with your computer. You find out that it is an "Ubuntu live CD" that was obviously created from an ISO file. Is there any way to find out who burned the CD? Or, on the flip side, let's say you were the one that burned the "Ubuntu live CD" and you lost it. Would somebody be able to know that it was you who made the CD? Can they get any info about the maker?

    Read the article

  • Is there a way to measure wifi traffic on a network from a client?

    - by millimoose
    Is there some way (preferrably one that comes with an existing tool) to measure the traffic going through the whole WiFi network from a computer connected to it? (That is, not from the AP or something between the modem and AP.) My situation is this: a few months back, the internet connection at my parent's place got really sluggish and laggy. (Lag spikes that cause page loads to time out etc, connections plain getting lost and dropping packets forever.) It's impossible to get mom's husband to do anything about this because he brushes this off with something like "just tell your sister to turn off torrents". Unfortunately the WiFi router's firmware doesn't do traffic logging. I'm not going to risk bricking it to put WRT on it; nor am I keen on rewiring the network to add a proxy to analyse the traffic. (I'm one of those people that make computers break just by looking at them, except machines I own.) I'd like to be able to find out roughly how much data is going over the air here while all the LAN wires are out of the router, all the computers accused of torrenting are off, etc. The idea is to either show that: Even if everything but my macbook is turned off, something is congesting the network. The husband is a systems developer and has a whole lot of mysterious hardware that's not to be touched around, one of them might be culprit. There is barely any traffic on the network, but the internet is still sluggish. Meaning this is likely a problem the ISP should solve. (Some hardware of theirs being glitchy, someone on an aggregated line hogging it constantly...) The network is encrypted, but I can temporarily set it to open for the sake of finding this out. So, in conclusion? Can this be done? Or is there some alternative way I could try to diagnose the problem?

    Read the article

  • 12.04 Unity 3D Not working where as Unity 2D works fine

    - by Stephen Martin
    I updated from 11.10 to 12.04 using the distribution upgrade, after that I couldn't log into using the Unity 3D desktop after logging in I would either never get unity's launcher or I would get the launcher and once I tried to do anything the windows lost their decoration and nothing would respond. If I use Unity 2D it works fine and in fact I'm using it to type this. I managed to get some info out of dmesg that looks like it's the route of whats happening. dmesg: [ 109.160165] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [ 109.160180] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state [ 109.167587] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 1226 at 1218, next 1227) [ 109.672273] [drm:i915_reset] *ERROR* Failed to reset chip. output of lspci | grep vga 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) output of /usr/lib/nux/unity_support_test -p IN 12.04 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no The same command in 11.10: stephenm@mcr-ubu1:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes stephenm@mcr-ubu1:~$ output of /var/log/Xorg.0.log [ 11.971] (II) intel(0): EDID vendor "LPL", prod id 307 [ 11.971] (II) intel(0): Printing DDC gathered Modelines: [ 11.971] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1405 800 803 809 822 -hsync -vsync (49.3 kHz) [ 12.770] (II) intel(0): Allocated new frame buffer 2176x800 stride 8704, tiled [ 15.087] (II) intel(0): EDID vendor "LPL", prod id 307 [ 15.087] (II) intel(0): Printing DDC gathered Modelines: [ 15.087] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1405 800 803 809 822 -hsync -vsync (49.3 kHz) [ 33.310] (II) XKB: reuse xkmfile /var/lib/xkb/server-93A39E9580D1D5B855D779F4595485C2CC66E0CF.xkm [ 34.900] (WW) intel(0): flip queue failed: Invalid argument [ 34.900] (WW) intel(0): Page flip failed: Invalid argument [ 34.900] (WW) intel(0): flip queue failed: Invalid argument [ 34.900] (WW) intel(0): Page flip failed: Invalid argument [ 34.913] (WW) intel(0): flip queue failed: Invalid argument [ 34.913] (WW) intel(0): Page flip failed: Invalid argument [ 34.913] (WW) intel(0): flip queue failed: Invalid argument [ 34.913] (WW) intel(0): Page flip failed: Invalid argument [ 34.926] (WW) intel(0): flip queue failed: Invalid argument [ 34.926] (WW) intel(0): Page flip failed: Invalid argument [ 34.926] (WW) intel(0): flip queue failed: Invalid argument [ 34.926] (WW) intel(0): Page flip failed: Invalid argument [ 35.501] (WW) intel(0): flip queue failed: Invalid argument [ 35.501] (WW) intel(0): Page flip failed: Invalid argument [ 35.501] (WW) intel(0): flip queue failed: Invalid argument [ 35.501] (WW) intel(0): Page flip failed: Invalid argument [ 41.519] [mi] Increasing EQ size to 512 to prevent dropped events. [ 42.079] (EE) intel(0): Detected a hung GPU, disabling acceleration. [ 42.079] (EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg. [ 42.598] (II) intel(0): EDID vendor "LPL", prod id 307 [ 42.598] (II) intel(0): Printing DDC gathered Modelines: [ 42.598] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1405 800 803 809 822 -hsync -vsync (49.3 kHz) [ 51.052] (II) AIGLX: Suspending AIGLX clients for VT switch I know im using the beta version so I'm not expecting it to work but does any one know what the problem may be or even why they Unity compatibility test is describing my video card as vmware when its an intel i915 and Ubuntu is running on the metal not virtualised. Unity 3D worked fine in 11.10

    Read the article

  • JavaOne Latin America 2012 is a wrap!

    - by arungupta
    Third JavaOne in Latin America (2010, 2011) is now a wrap! Like last year, the event started with a Geek Bike Ride. I could not attend the bike ride because of pre-planned activities but heard lots of good comments about it afterwards. This is a great way to engage with JavaOne attendees in an informal setting. I highly recommend you joining next time! JavaOne Blog provides a a great coverage for the opening keynotes. I talked about all the great set of functionality that is coming in the Java EE 7 Platform. Also shared the details on how Java EE 7 JSRs are willing to take help from the Adopt-a-JSR program. glassfish.org/adoptajsr bridges the gap between JUGs willing to participate and looking for areas on where to help. The different specification leads have identified areas on where they are looking for feedback. So if you are JUG is interested in picking a JSR, I recommend to take a look at glassfish.org/adoptajsr and jump on the bandwagon. The main attraction for the Tuesday evening was the GlassFish Party. The party was packed with Latin American JUG leaders, execs from Oracle, and local community members. Free flowing food and beer/caipirinhas acted as great lubricant for great conversations. Some of them were considering the migration from Spring -> Java EE 6 and replacing their primary app server with GlassFish. Locaweb, a local hosting provider sponsored a round of beer at the party as well. They are planning to come with Java EE hosting next year and GlassFish would be a logical choice for them ;) I heard lots of positive feedback about the party afterwards. Many thanks to Bruno Borges for organizing a great party! Check out some more fun pictures of the party! Next day, I gave a presentation on "The Java EE 7 Platform: Productivity and HTML 5" and the slides are now available: With so much new content coming in the plaform: Java Caching API (JSR 107) Concurrency Utilities for Java EE (JSR 236) Batch Applications for the Java Platform (JSR 352) Java API for JSON (JSR 353) Java API for WebSocket (JSR 356) And JAX-RS 2.0 (JSR 339) and JMS 2.0 (JSR 343) getting major updates, there is definitely lot of excitement that was evident amongst the attendees. The talk was delivered in the biggest hall and had about 200 attendees. Also spent a lot of time talking to folks at the OTN Lounge. The JUG leaders appreciation dinner in the evening had its usual share of fun. Day 3 started with a session on "Building HTML5 WebSocket Apps in Java". The slides are now available: The room was packed with about 150 attendees and there was good interaction in the room as well. A collaborative whiteboard built using WebSocket was very well received. The following tweets made it more worthwhile: A WebSocket speek, by @ArunGupta, was worth every hour lost in transit. #JavaOneBrasil2012, #JavaOneBr @arungupta awesome presentation about WebSockets :) The session was immediately followed by the hands-on lab "Developing JAX-RS Web Applications Utilizing Server-Sent Events and WebSocket". The lab covers JAX-RS 2.0, Jersey-specific features such as Server-Sent Events, and a WebSocket endpoint using JSR 356. The complete self-paced lab guide can be downloaded from here. The lab was planned for 2 hours but several folks finished the entire exercise in about 75 mins. The wonderfully written lab material and an added incentive of Java EE 6 Pocket Guide did the trick ;-) I also spoke at "The Java Community Process: How You Can Make a Positive Difference". It was really great to see several JUG leaders talking about Adopt-a-JSR program and other activities that attendees can do to participate in the JCP. I shared details about Adopt a Java EE 7 JSR as well. The community keynote in the evening was looking fun but I had to leave in between to go through the peak Sao Paulo traffic time :) Enjoy the complete set of pictures in the album:

    Read the article

  • Unity 3D Not working where as Unity 2D works fine [closed]

    - by Stephen Martin
    I updated from 11.10 to 12.04 using the distribution upgrade, after that I couldn't log into using the Unity 3D desktop after logging in I would either never get unity's launcher or I would get the launcher and once I tried to do anything the windows lost their decoration and nothing would respond. If I use Unity 2D it works fine and in fact I'm using it to type this. I managed to get some info out of dmesg that looks like it's the route of whats happening. dmesg: [ 109.160165] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [ 109.160180] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state [ 109.167587] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 1226 at 1218, next 1227) [ 109.672273] [drm:i915_reset] *ERROR* Failed to reset chip. output of lspci | grep vga 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) output of /usr/lib/nux/unity_support_test -p IN 12.04 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no The same command in 11.10: stephenm@mcr-ubu1:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes stephenm@mcr-ubu1:~$ output of /var/log/Xorg.0.log [ 11.971] (II) intel(0): EDID vendor "LPL", prod id 307 [ 11.971] (II) intel(0): Printing DDC gathered Modelines: [ 11.971] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1405 800 803 809 822 -hsync -vsync (49.3 kHz) [ 12.770] (II) intel(0): Allocated new frame buffer 2176x800 stride 8704, tiled [ 15.087] (II) intel(0): EDID vendor "LPL", prod id 307 [ 15.087] (II) intel(0): Printing DDC gathered Modelines: [ 15.087] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1405 800 803 809 822 -hsync -vsync (49.3 kHz) [ 33.310] (II) XKB: reuse xkmfile /var/lib/xkb/server-93A39E9580D1D5B855D779F4595485C2CC66E0CF.xkm [ 34.900] (WW) intel(0): flip queue failed: Invalid argument [ 34.900] (WW) intel(0): Page flip failed: Invalid argument [ 34.900] (WW) intel(0): flip queue failed: Invalid argument [ 34.900] (WW) intel(0): Page flip failed: Invalid argument [ 34.913] (WW) intel(0): flip queue failed: Invalid argument [ 34.913] (WW) intel(0): Page flip failed: Invalid argument [ 34.913] (WW) intel(0): flip queue failed: Invalid argument [ 34.913] (WW) intel(0): Page flip failed: Invalid argument [ 34.926] (WW) intel(0): flip queue failed: Invalid argument [ 34.926] (WW) intel(0): Page flip failed: Invalid argument [ 34.926] (WW) intel(0): flip queue failed: Invalid argument [ 34.926] (WW) intel(0): Page flip failed: Invalid argument [ 35.501] (WW) intel(0): flip queue failed: Invalid argument [ 35.501] (WW) intel(0): Page flip failed: Invalid argument [ 35.501] (WW) intel(0): flip queue failed: Invalid argument [ 35.501] (WW) intel(0): Page flip failed: Invalid argument [ 41.519] [mi] Increasing EQ size to 512 to prevent dropped events. [ 42.079] (EE) intel(0): Detected a hung GPU, disabling acceleration. [ 42.079] (EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg. [ 42.598] (II) intel(0): EDID vendor "LPL", prod id 307 [ 42.598] (II) intel(0): Printing DDC gathered Modelines: [ 42.598] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1405 800 803 809 822 -hsync -vsync (49.3 kHz) [ 51.052] (II) AIGLX: Suspending AIGLX clients for VT switch I know im using the beta version so I'm not expecting it to work but does any one know what the problem may be or even why they Unity compatibility test is describing my video card as vmware when its an intel i915 and Ubuntu is running on the metal not virtualised. Unity 3D worked fine in 11.10

    Read the article

  • A basic T4 template for generating Model Metadata in ASP.NET MVC2

    - by rajbk
    I have been learning about T4 templates recently by looking at the awesome ADO.NET POCO entity generator. By using the POCO entity generator template as a base, I created a T4 template which generates metadata classes for a given Entity Data Model. This speeds coding by reducing the amount of typing required when creating view specific model and its metadata. To use this template, Download the template provided at the bottom. Set two values in the template file. The first one should point to the EDM you wish to generate metadata for. The second is used to suffix the namespace and classes that get generated. string inputFile = @"Northwind.edmx"; string suffix = "AutoMetadata"; Add the template to your MVC 2 Visual Studio 2010 project. Once you add it, a number of classes will get added to your project based on the number of entities you have.    One of these classes is shown below. Note that the DisplayName, Required and StringLength attributes have been added by the t4 template. //------------------------------------------------------------------------------ // <auto-generated> // This code was generated from a template. // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------   using System; using System.ComponentModel; using System.ComponentModel.DataAnnotations;   namespace NorthwindSales.ModelsAutoMetadata { public partial class CustomerAutoMetadata { [DisplayName("Customer ID")] [Required] [StringLength(5)] public string CustomerID { get; set; } [DisplayName("Company Name")] [Required] [StringLength(40)] public string CompanyName { get; set; } [DisplayName("Contact Name")] [StringLength(30)] public string ContactName { get; set; } [DisplayName("Contact Title")] [StringLength(30)] public string ContactTitle { get; set; } [DisplayName("Address")] [StringLength(60)] public string Address { get; set; } [DisplayName("City")] [StringLength(15)] public string City { get; set; } [DisplayName("Region")] [StringLength(15)] public string Region { get; set; } [DisplayName("Postal Code")] [StringLength(10)] public string PostalCode { get; set; } [DisplayName("Country")] [StringLength(15)] public string Country { get; set; } [DisplayName("Phone")] [StringLength(24)] public string Phone { get; set; } [DisplayName("Fax")] [StringLength(24)] public string Fax { get; set; } } } The gen’d class can be used from your project by creating a partial class with the entity name and setting the MetadataType attribute.namespace MyProject.Models{ [MetadataType(typeof(CustomerAutoMetadata))] public partial class Customer { }} You can also copy the code in the metadata class generated and create your own ViewModel class. Note that the template is super basic  and does not take into account complex properties. I have tested it with the Northwind database. This is a work in progress. Feel free to modify the template to suite your requirements. Standard disclaimer follows: Use At Your Own Risk, Works on my machine running VS 2010 RTM/ASP.NET MVC 2 AutoMetaData.zip Mr. Incredible: Of course I have a secret identity. I don't know a single superhero who doesn't. Who wants the pressure of being super all the time?

    Read the article

  • Sneak peek at next generation Three MiFi unit – Huawei E585

    - by Liam Westley
    Last Wednesday I was fortunate to be invited to a sneak preview of the next generation Three MiFi unit, the Huawei E585. Many thanks to all those who posted questions both via this blog or via @westleyl on Twitter. I think I made sure I asked every question posed to the MiFi product manager from Three UK, and so here's the answers you were after. What is a MiFi? For those who are wondering, a MiFi unit is a 3G broadband modem combined with a WiFi access point, providing 3G broadband data access to up to five devices simultaneously via standard WiFi connections. What is different? It appears the prime task of enhancing the MiFi was to improve the user experience and user interface, both in terms of the device hardware and within the management software to configure the device.  I think this was a very sensible decision as these areas had substantial room for improvement. Single button operation to switch on, enable WiFi and connect to 3G Improved OELD display (see below), replacing the multi coloured LEDs; including signal strength, SMS notifications, the number of connected clients and data usage Management is via a web based dashboard accessible from any web browser. This is a big win for those running Linux, Mac OS/X, iPad users and, for me, as I can now configure the device from Windows 7 64-bit Charging is via micro USB, the new standard for small USB devices; you cannot use your old charger for the new MiFi unit Automatic reconnection when regaining a signal Improved charging time, which should allow recharging of the device when in use Although subjective, the black and silver design does look more classy than the silver and white plastic of the original MiFi What is the same? Virtually the same size and weight The battery is the same unit as the original MiFi so you’ll have a handy spare if you upgrade Data plans remain the same as the current MiFi, so cheapest price for upgraders will be £49 pay as you go Still only works on 3G networks, with no fallback to GPRS or EDGE There is no specific upgrade path for existing three customers, either from dongle or from the original MiFi My opinion I think three have concentrated on the correct areas of usability and user experience rather than trying to add new whizz bang technology features which aren’t of interest to mainstream users. The one button operation and the improved device display will make it much easier to use when out and about. If the automatic reconnection proves reliable that will remove a major bugbear that I experienced the previous evening when travelling on the First Great Western line from Paddington to Didcot Parkway.  The signal was repeatedly lost as we sped through tunnels and cuttings, and without automatic reconnection is was a real pain to keep pressing the data button on the MiFi to re-establish my data connection. And finally, the web based dashboard will mean I no longer need to resort to my XP based netbook to configure the SSID and password. My everyday laptop runs Windows 7 64-bit which appears to confuse the older 3 WiFi manager which cannot locate the MiFi when connected. Links to other sites, and other images of the device Good first impressions from Ben Smith, http://thereallymobileproject.com/2010/06/3uk-announce-a-new-mifi-with-a-screen/ Also, a round up of other sneak preview posts, http://www.3mobilebuzz.com/2010/06/11/mifi-round-two-your-view/ Pictures Here is a comparison of the old MiFi device next to the new device, complete with OLED display and the Huawei logo now being a prominent feature on the front of the device. One of my fellow bloggers had a Linux based netbook, showing off the web based dashboard complete with Text messages panel to manage SMS. And finally, I never thought that my blog sub title would ever end up printed onto a cup cake, ... and here's some of the other cup cakes ...

    Read the article

  • This Week in Geek History: Gmail Goes Public, Deep Blue Wins at Chess, and the Birth of Thomas Edison

    - by Jason Fitzpatrick
    Every week we bring you a snapshot of the week in Geek History. This week we’re taking a peek at the public release of Gmail, the first time a computer won against a chess champion, and the birth of prolific inventor Thomas Edison. Gmail Goes Public It’s hard to believe that Gmail has only been around for seven years and that for the first three years of its life it was invite only. In 2007 Gmail dropped the invite only requirement (although they would hold onto the “beta” tag for another two years) and opened its doors for anyone to grab a username @gmail. For what seemed like an entire epoch in internet history Gmail had the slickest web-based email around with constant innovations and features rolling out from Gmail Labs. Only in the last year or so have major overhauls at competitors like Hotmail and Yahoo! Mail brought other services up to speed. Can’t stand reading a Week in Geek History entry without a random fact? Here you go: gmail.com was originally owned by the Garfield franchise and ran a service that delivered Garfield comics to your email inbox. No, we’re not kidding. Deep Blue Proves Itself a Chess Master Deep Blue was a super computer constructed by IBM with the sole purpose of winning chess matches. In 2011 with the all seeing eye of Google and the amazing computational abilities of engines like Wolfram Alpha we simply take powerful computers immersed in our daily lives for granted. The 1996 match against reigning world chest champion Garry Kasparov where in Deep Blue held its own, but ultimately lost, in a  4-2 match shook a lot of people up. What did it mean if something that was considered such an elegant and quintessentially human endeavor such as chess was so easy for a machine? A series of upgrades helped Deep Blue outright win a match against Kasparov in 1997 (seen in the photo above). After the win Deep Blue was retired and disassembled. Parts of Deep Blue are housed in the National Museum of History and the Computer History Museum. Birth of Thomas Edison Thomas Alva Edison was one of the most prolific inventors in history and holds an astounding 1,093 US Patents. He is responsible for outright inventing or greatly refining major innovations in the history of world culture including the phonograph, the movie camera, the carbon microphone used in nearly every telephone well into the 1980s, batteries for electric cars (a notion we’d take over a century to take seriously), voting machines, and of course his enormous contribution to electric distribution systems. Despite the role of scientist and inventor being largely unglamorous, Thomas Edison and his tumultuous relationship with fellow inventor Nikola Tesla have been fodder for everything from books, to comics, to movies, and video games. Other Notable Moments from This Week in Geek History Although we only shine the spotlight on three interesting facts a week in our Geek History column, that doesn’t mean we don’t have space to highlight a few more in passing. This week in Geek History: 1971 – Apollo 14 returns to Earth after third Lunar mission. 1974 – Birth of Robot Chicken creator Seth Green. 1986 – Death of Dune creator Frank Herbert. Goodnight Dune. 1997 – Simpsons becomes longest running animated show on television. Have an interesting bit of geek trivia to share? Shoot us an email to [email protected] with “history” in the subject line and we’ll be sure to add it to our list of trivia. Latest Features How-To Geek ETC Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? Clean Up Google Calendar’s Interface in Chrome and Iron The Rise and Fall of Kramerica? [Seinfeld Video] GNOME Shell 3 Live CDs for OpenSUSE and Fedora Available for Testing Picplz Offers Special FX, Sharing, and Backup of Your Smartphone Pics BUILD! An Epic LEGO Stop Motion Film [VIDEO] The Lingering Glow of Sunset over a Winter Landscape Wallpaper

    Read the article

  • How To Apply Online For New Passport Or Renewal Of Your Passport [Indian Websites]

    - by Gopinath
    Are you bored wasting time and energy in standing lengthy queues at Passport offices in India to apply a new passport or renew it? Indian Government Passport Office has an online portal that lets you apply for new passport or renew your expiring passport by filling details online. By filling the details online you can complete half of the required formalities sitting at home and the rest of tasks like submitting required proofs, paying money etc at your regional passport office. Saves lot of time. Advantages of Applying For Passport Online Ask anyone who already obtained a passport by visiting the passport office, they will narrate stories of spending long time in queues. In certain office, the length of queues may require you to stand 3 to 4 hours. And sometimes by the time your turn comes, the officers may break for lunch, coffee or the day if your time is very bad. The main advantage of applying for passport using this online portal is – we can skip the process of standing in long queues to obtain tokens for submitting tokens and also we get a pre booked appointment with passport issuing officer for submitting the proofs and paying fees. When you submit the application online, an appointment will be booked automatically for submitting the required documents and fees so that  you can just walk-in to passport office 15 minutes ahead of your appointment. List Of Passport Offices Accepting Online Application Forms I know that you are excited and all set to apply online, but hold on. The online Passport application submission is supported in 37 regional passport offices across India as I write this post. If you are residing in any of these cities, then only you can apply online – Ahemdabad,  Amritsar, Bareilly, Bhopal, Bhubneswar, Chennai, Cochin, Coimbatore, Dehradun, Delhi, Ghaziabad, Guwahati, Hyderabad, Jaipur, Jalandhar, Jammu, Kolkata, Kozhikode, Lucknow, Madurai, Malappuram, Mumbai, Nagpur, Panaji, Patna, Pune, Raipur, Ranchi, Shimla, Srinagar, Surat, Thane, Trichy, Trivandrum, Visakhapatnam. Others should approach the passport office directly. Government is trying to expand this to other locations, so please check if place accepting online registration by visiting registration page(link given below). Types Of Applications Accepted Online The online system accepts following types of passport applications Fresh Passport / Renewal New Passport in lieu of Damaged/Lost Passport Passport for Children up to 15 Years of Age Re-issue of Passport / Additional Booklet Indian Govt. Passport Office Website And Online Application URL To apply for passport online visit the url https://passport.gov.in/pms/Information.jsp using Internet Explorer browser. This site may not work on your Firefox, Chrome or other browsers as the site request users to use Internet Explorer. Here are few other links that will help you get more details on passport application Govt. Of India Passport Office Website Passport Application Fee Structure Information Passport Application Filling Guidelines Passport Application Check List URL For NRIs To Apply Online If you are an NRI then the above links and the list of supported Passport offices are not for you. NRIs should use the URL http://passport.gov.in/nri/OnlineRegistration.jsp for applying passport related services online. For more details you can visit special NRI section on Passport website. CC Image credit: LucasTheExperience This article titled,How To Apply Online For New Passport Or Renewal Of Your Passport [Indian Websites], was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • I’m a Phoenix… and I’m miffed

    - by Stan Spotts
    For personal reasons, almost 30 years ago I left school to enter the workforce. I decided late 2008 to go back to school and finish my degree. After the expected loss of credits for a transfer, from Temple University to University of Phoenix, I'm now about 75% done. The experience has been interesting. Classes are time compressed, only 5 weeks each. Because I have a family and a full time job, I'm taking one at a time. Even so, I've written more papers in these classes than I ever wrote at Temple. My own papers are one thing, but the team papers give me heartburn since I can't completely control what goes into them. Not a big deal except that they make up 30% of our grade. In any case, most of the class facilitators have been great. I had great ones for Accounting, Finance, and frankly most others. I've had a few (4, maybe) cases where I was less than 2 points from an A, and asked the facilitator if I could get any of my work reviewed to see if I could get those extra points. I figured it was worth a shot, and there were no extenuating circumstances to help make my case. I think that only one facilitator decided after a review of one paper that my interpretation was good, just not what he expected, and gave me another point, which gave me an A. So while none are pushovers, they've all been open to discussion, which is as much as I should expect. Overall, good experience. That is, until my last class. On the second week, the day I was due to hand in my personal assignment for the week, I was in an accident. An SUV creamed my little Ford Focus, and totaled it (estimated repair over $11K). I was pretty banged up, especially my left shoulder. I was scheduled for rotator cuff surgery for two weeks later, and getting hit against the door really made it worse. After dealing with the police, the EMT, the tow truck, and the Percocet and Flexeril for the pain, I crashed for the night and didn't get to upload my paper until the next day. The instructor took 30% off for it being late, even after I supplied photos of the car, my arm (huge bruises), and offered to supply the police report number. I figured I'd be okay since that's 2.7 points, and I could lose up to 5 before jeopardizing an A grade. Well, that wasn't the case as we lost more points than I expected on our team paper in Week 5. I ended up with a 94.3. Yes, 7/10 of a point from an A. Of course I asked the instructor to review the issue with the accident and give me just the 0.7 points I needed for the A. That got me a short response of "I have received your emails and review your work over the last five weeks. Your current grade will stand. If you would like to dispute your grade then please feel free to contact your academic advisor. I wish you much success in your professional and academic career." Brrrr….! So I asked my academic advisor to file a dispute. If it wasn't that a pretty bad car accident was the cause, I wouldn't have. Without the grade reduction, I would have had a 97 for the class, so I'll argue that I was performing at the A level throughout the class. Why her purported "review" of my work didn't then warrant such a minor adjustment, I don't know. An A- drops my GPA, and this ticked me off. Now I have to wait and see what the school says about the grade dispute.

    Read the article

  • Visual Studio &amp; TFS &ndash; List of addins, extensions, patches and hotfixes &ndash; Latest and Greatest

    - by terje
    This post is a list of the addins and extensions we (I ) recommend for use in Inmeta.  It’s coming up all the time – what to install, where are the download sites, etc etc, and thus I thought it better to post it here and keep it updated. The basics are Visual Studio 2010 connected to a Team Foundation Server 2010.  The edition of Visual Studio I use is the Ultimate Edition, but as many stay with the Premium Edition I’ve marked the extensions which only works with the Ultimate with a . I’ve also split the group into Recommended (which means Required) and Optional (which means Recommended) and Nice to Have (which means Optional) .   The focus is to get a setup which can be used for a complete coding experience for the whole ALM process.  The Code Gallery is found either through the Tools/Extension Manager menu in Visual Studio or through this link. The ones to really download is the Recommended category.  Then consider the Optional based on your needs.  The list of course reflects what I use for my work , so it is by no means complete, and for some of the tools there are equally useful alternatives.  The components directly associated with Visual Studio from Microsoft should be common, see the Microsoft column.     Product Available on Code Gallery Latest Version License Rec/Opt/N2H Applicable to Microsoft TFS Power Tools Sept 2010 Complete setup msi on link, split into parts on CG Sept 2010 Free Recommended TFS integration Yes Productivity Power Tools Yes 10.0.11019.3 Free Recommended Coding Yes Code Contracts No 1.4.30903 Free Recommended Coding & Quality Yes Code Contracts Editor Extensions Yes 1.4.30903 Free Recommended Coding & Quality Yes VSCommands Yes 3.6.4.1 Lite version Free (Good enough) Nice to have Coding No Power Commands Yes 1.0.2.3 Free Recommended Coding Yes FeaturePack 2   No.  MSDN Subscriber download under Visual Studio 2010 FP2 Part of MSDN Subscription Recommended Modeling & Testing Yes ReSharper No (Trial only) 5.1.1 Licensed Recommended Coding & Quality No dotTrace No 4.0.1 Licensed Optional Quality No NDepends No (Trial only) Licensed Optional Quality No tangible T4 editor Yes 1.950 Lite version Free (Good enough) Optional Coding (T4 templates) No Reflector No (Trial of Pro version only) 6.5 Lite version Free (Good enough) Recommended Coding/Investigation No LinqPad No 4.26.2 Licensed Nice to have Coding No Beyond Compare No 3.1.11 Licensed Recommended Coding/Investigation No Pex and Moles No (Moles available alone on CG) . Complete on MSDN Subscriber download under Visual Studio 2010 0.94.51023 Part of MSDN Subscription Optional Coding & Unit Testing Yes ApexSQL No Licensed Nice to have SQL No                 Some important Patches, upgrades and fixes Product Date Information Rec/Opt Applicable to Scrolling context menu KB2345133 and KB2413613 October 2010 Here Recommended Visual Studio MTM Patch October 2010 Here and here  KB2387011 Recommended (if you use MTM) MTM Data warehouse fix June 2010 Iteration dates fails with SQL 2008 R2.  KB2222312. Affects Burndown chart in Agile workbook Only for SQL 2008 R2 Server Upgrade 2008 to 2010 issue and hotfix August 2010 Fixes problems with labels and branches which are lost during upgrade. Apply before upgrade. Note: This has been fixed in the latest re-release of the TFS Server dated Aug 5th 2010. See here. Recommends downloading the latest bits. Only if upgrade from 2008 from earlier bits Server

    Read the article

  • Clean Code: A Handbook of Agile Software Craftsmanship – book review

    - by DigiMortal
       Writing code that is easy read and test is not something that is easy to achieve. Unfortunately there are still way too much programming students who write awful spaghetti after graduating. But there is one really good book that helps you raise your code to new level – your code will be also communication tool for you and your fellow programmers. “Clean Code: A Handbook of Agile Software Craftsmanship” by Robert C. Martin is excellent book that helps you start writing the easily readable code. Of course, you are the one who has to learn and practice but using this book you have very good guide that keeps you going to right direction. You can start writing better code while you read this book and you can do it right in your current projects – you don’t have to create new guestbook or some other simple application to start practicing. Take the project you are working on and start making it better! My special thanks to Robert C. Martin I want to say my special thanks to Robert C. Martin for this book. There are many books that teach you different stuff and usually you have markable learning curve to go before you start getting results. There are many books that show you the direction to go and then leave you alone figuring out how to achieve all that stuff you just read about. Clean Code gives you a lot more – the mental tools to use so you can go your way to clean code being sure you will be soon there. I am reading books as much as I have time for it. Clean Code is top-level book for developers who have to write working code. Before anything else take Clean Code and read it. You will never regret your decision. I promise. Fragment of editorial review “Even bad code can function. But if code isn’t clean, it can bring a development organization to its knees. Every year, countless hours and significant resources are lost because of poorly written code. But it doesn’t have to be that way. What kind of work will you be doing? You’ll be reading code—lots of code. And you will be challenged to think about what’s right about that code, and what’s wrong with it. More importantly, you will be challenged to reassess your professional values and your commitment to your craft. Readers will come away from this book understanding How to tell the difference between good and bad code How to write good code and how to transform bad code into good code How to create good names, good functions, good objects, and good classes How to format code for maximum readability How to implement complete error handling without obscuring code logic How to unit test and practice test-driven development This book is a must for any developer, software engineer, project manager, team lead, or systems analyst with an interest in producing better code.” Table of contents Clean code Meaningful names Functions Comments Formatting Objects and data structures Error handling Boundaries Unit tests Classes Systems Emergence Concurrency Successive refinement JUnit internals Refactoring SerialDate Smells and heuristics A Concurrency II org.jfree.date.SerialDate Cross references of heuristics Epilogue Index

    Read the article

  • How To Clear An Alert - Part 2

    - by werner.de.gruyter
    There were some interesting comments and remarks on the original posting, so I decided to do a follow-up and address some of the issues that got raised... Handling Metric Errors First of all, there is a significant difference between an 'error' and an 'alert'. An 'alert' is the violation of a condition (a threshold) specified for a given metric. That means that the Agent is collecting and gathering the data for the metric, but there is a situation that requires the attention of an administrator. An 'error' on the other hand however, is a failure to collect metric data: The Agent is throwing the error because it cannot determine the value for the metric Whereas the 'alert' guarantees continuity of the metric data, an 'error' signals a big unknown. And the unknown aspect of all this is what makes an error a lot more serious than a regular alert: If you don't know what the current state of affairs is, there could be some serious issues brewing that nobody is aware of... The life-cycle of a Metric Error Clearing a metric error is pretty much the same workflow as a metric 'alert': The Agent signals the error after it failed to execute the metric The error is uploaded to the OMS/repository, where it becomes visible in the Console The error will remain active until the Agent is able to execute the metric successfully. Even though the metric is still getting scheduled and executed on a regular basis, the error will remain outstanding as long as the Agent is not capable of executing the metric correctly Knowing this, the way to fix the metric error should be obvious: Take the 'problem' away, and as soon as the metric is executed again (based on the frequency of the metric), the error will go away. The same tricks used to clear alerts can be used here too: Wait for the next scheduled execution. For those metrics that are executed regularly (like every 15 minutes or so), it's just a matter of waiting those minutes to see the updates. The 'Reevaluate Alert' button can be used to force a re-execution of the metric. In case a metric is executed once a day, this will be a better way to make sure that the underlying problem has been solved. And if it has been, the metric error will be removed, and the regular data points will be uploaded to the repository. And just in case you have to 'force' the issue a little: If you disable and re-enable a metric, it will get re-scheduled. And that means a new metric execution, and an update of the (hopefully) fixed problem. Database server-generated alerts and problem checkers There are various ways the Agent can collect metric data: Via a script or a SQL statement, reading a log file, getting a value from an SNMP OID or listening for SNMP traps or via the DBMS_SERVER_ALERTS mechanism of an Oracle database. For those alert which are generated by the database (like tablespace metrics for 10g and above databases), the Agent just 'waits' for the database to report any new findings. If the Agent has lost the current state of the server-side metrics (due to an incomplete recovery after a disaster, or after an improper use of the 'emctl clearstate' command), the Agent might be still aware of an alert that the database no longer has (or vice versa). The same goes for 'problem checker' alerts: Those metrics that only report data if there is a problem (like the 'invalid objects' metric) will also have a problem if the Agent state has been tampered with (again, the incomplete recovery, and after improper use of 'emctl clearstate' are the two main causes for this). The best way to deal with these kinds of mismatches, is to simple disable and re-enable the metric again: The disabling will clear the state of the metric, and the re-enabling will force a re-execution of the metric, so the new and updated results can get uploaded to the repository. Starting 10gR5, the Agent performs additional checks and verifications after each restart of the Agent and/or each state change of the database (shutdown/startup or failover in case of DataGuard) to catch these kinds of mismatches.

    Read the article

  • SQL SERVER – A Picture is Worth a Thousand Words – A Collection of Inspiring and Funny Posts by Vinod Kumar

    - by pinaldave
    One of the most popular quotes is: A picture is worth a thousand words. Working on this concept I started a series over my blog called the “Picture Post”. Rather than rambling over tons of material over text, we are trying to give you a capsule mode of the blog in a quick glance. Some of the picture posts already available over my blog are: Correlation of Ego and Work: Ego and Pride most of the times become a hindrance when we work inside a team. Take this cue, the first ever Picture post was published. Simple and easy to understand concept. Would want to say, Ego is the biggest enemy to humans. Read Original Post. Success (Perception Vs Reality): Personally, have always thought success is not something the talented achieve with the opportunity presented to them, but success is developed using the opportunity in hand now. In this fast paced world where success is pre-defined and convoluted by metrics it is hard to understand how complex it can sometimes be. So I took a stab at this concept in a simple way. Read Original Post. Doing Vs Saying: As Einstein would describe, Insanity is doing the same thing over and over again and expecting different results. Given the amount of information we get, it is difficult to keep track, learn and implement the same. If you were ever reminded of your college days, there will always be 5-6 people doing different things and we naturally try to emulate what they are doing. This could be from competitive exams GMAT, GRE, CAT, Higher-Ed, B-School hunting etc. Rather than saying you are going to do, it is best to do and then say!!! Read Original Picture Post. Your View Vs Management View: Being in the corporate world can be really demanding and we keep asking this question – “Why me?” when the performance appraisal process ends. In this post I just want to ask you one frank opinion – “Are you really self-critical in your assessments?”. If that is the case there shouldn’t be any heartburns or surprises. If you had just one thing to take back, well forget what others are getting but invest time in making yourself better because that is going to take you longer and further in your career. Read Picture Post. Blogging lifecycle for majority: I am happy and fortunate to be in this blog post because this picture post surely doesn’t apply to SQLAuthority where consistency and persistence have been the hallmark of the blog. For the majority others, who have a tendency to start a blog, get into slumber for a while and write saying they want to get back to blogging, the picture post was specifically done for them. Paradox of being someone else: It is always a dream that we want to become somebody and in this process of doing so, we become nobody. In this constant tussle of lost identity we forget to enjoy the moment that is in front of us. I just depicted this using a simple analogy of our constant struggle to get to the other side, just to realize we missed the wonderful moments. Grass is not greener on the other side, but grass is greener where we water the surface. Read Picture Post. And on the lighter side… Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Tough Decisions

    - by Johnm
    There was once a thriving business that employed two Database Administrators, Sam and Jim. Both DBAs were certified, educated and highly talented in their skill sets. During lunch breaks these two DBAs were often found together discussing best practices, troubleshooting techniques and the latest release notes for the upcoming version of SQL Server. They genuinely loved what they did. The maintenance of the first database was the responsibility of Sam. He was the architect of this server's setup and he was very meticulous in its configuration. He regularly monitored the health of the database, validated backup files and regularly adhered to the best practices that were advocated by well respected professionals. He was very proud of the fact that there was never a database that he managed that lost data or performed poorly. The maintenance of the second database was the responsibility of Jim. He too was the architect of this server's setup. At the time that he built this server, his understanding of the finer details of configuration were not as clear as they are today. The server was build on a shoestring budget and with very little time for testing and implementation. Jim often monitored the health of the database; but in more of a reactionary mode due to user complaints of slowness or failed transactions. Deadlocks abounded and the backup files were never validated. One day, the announcement was made that revealed that the business had hit financially hard times. Budgets were being cut, limitation on spending was implemented and the reduction in full-time staff was required. Since having two DBAs was regarded a luxury by many, this meant that either Sam or Jim were about to find themselves out of a job. Sam and Jim's boss, Frank, was faced with a very tough decision. Sam's performance was flawless. His techniques and practices were perfection. The databases he managed were reliable and efficient. His solutions are "by the book". When given a task it is certain that, while it may take a little longer, it will be done right the first time. Jim's techniques and practices were not perfect; but effective and responsive. He made mistakes regularly; but he shows that he learns from them and they often result in innovative solutions. When given a task it is certain that, while the results may require some tweaking, it will be done on time and under budget. You are Frank's best friend. He approaches you and presents this scenario. He must layoff one of his valued DBAs the very next morning. Frank asks you: "All else being equal, who would you let go? and Why?" Another pertinent question is raised: "Regardless of good times or bad, if you had to choose, which DBA would you want on your team when tough challenges arise?" Your response is. (This is where you enter a comment below)

    Read the article

  • You Are Hiring But Do Candidate&rsquo;s Want to Work For You

    - by david.talamelli
    So here you are – it has happened, you are now interviewing for that position that you have either applied for or maybe were called about. Whether you are an “active” candidate looking for a job or a “passive” candidate who was contacted about the opportunity, it doesn’t matter now. Regardless of the circumstances of how you got to the interview stage, how you and your new potential manager connect with each other at interview will play a part in whether you are successful in landing that job. The best manager/employee relationships I think tend to be the ones where both the manager and employee have a common goal that they are both working towards and they work together in unison to achieve these goals. Candidates – when you are interviewing for a role, remember that an interview is a two way process. An interview shouldn’t be just a case of a company interviewing you to see if you are a good fit for a certain role. Don’t forget in an interview process it is equally important that you take the opportunity to similarly interview the company to see if that role/company are the right place for you to move to as the next step in your career. I think an interview should not only be a chance for a Hiring Manager to get to better know a candidate and asses his capability and cultural fit for a team/company but it should also be a chance for the candidate to similarly assess a company or manager about whether they are someone that they want to work with. Managers – I know Recruiters have been talking about the “war for talent” since before many of you were managers, but there is no denying it – it exists. You are not only competing with other companies for talented individuals but you are also competing with the existing companies that those talented individuals are working at. Companies are not going to let the people they have identified as superstars resign without a fight (this is the classic Counter Offer scenario which may be another blog post in itself). So how do we get these great people – their current employer will do all they can to keep them, everyone else wants them – does this mean all hope is lost? No, absolutely not. The same reasons that have always existed on why candidates are interested in other opportunities is still there: it could be that someone is looking for career advancement, or they want the chance to work with new technology or maybe you have an opportunity that is exactly what that person is looking to do. As a Hiring Manager don’t just conduct your interviews in question/answer mode. You should talk to that individual to work out what it is they are looking for and you can then relate how your role addresses that. It is potentially going to be the two of you working together so you two are the ones who have to be most comfortable with each other. Don’t oversell the role – set realistic expectations of what that candidate can expect working in your team – give them the good, the bad and the ugly so they can make an informed decision. Manager’s think back to when you last were looking for a job and put yourself in the candidate’s shoes. When you were looking for a job, what was it that you wanted to know about Oracle, or what was it that you wanted more information about. There are some great Business Leaders that work here at Oracle – if you are one of them it is likely that you already are doing all these things anyway. The good news for you is that you are also likely raising yourself head and shoulders above what many interviewers do – that in itself gives you a competitive advantage in this ‘war for talent’ but as a great Business Leader you already know that

    Read the article

  • Managing User & Role Security with Oracle SQL Developer

    - by thatjeffsmith
    With the advent of SQL Developer v3.0, users have had access to some powerful database administration features. Version 3.1 introduced more powerful features such as an interface to Data Pump and RMAN. Today I want to talk about some very simple but frequently ran tasks that SQL Developer can assist with, like: identifying privs granted to users managing role privs assigning new roles and privs to users & roles Before getting started, you’ll need a connection to the database with the proper privileges. The common ROLE used to accomplish this is the ‘DBA‘ role. Curious as to what the DBA role is actually comprised of? Let’s find out! Open the DBA Console First make sure you’re connected to the database you want to manage security on with a privileged administrator account. Then open the View menu and select ‘DBA.’ Accessing the DBA panel ‘Create’ a Connection Click on the green ‘+’ button in the DBA panel. It will ask you to choose a previously defined SQL Developer connection. Defining a DBA connection in Oracle SQL Developer Once connected you will see a tree list of DBA features you can start interacting with. Expand the ‘Security’ Tree Node As you click on an object in the DBA panel, the ‘viewer’ will open on the right-hand-side, just like you are accustomed to seeing when clicking on a table or stored procedure. Accessing the DBA role If I’m a newly hired Oracle DBA, the first thing I might want to do is become very familiar with the DBA role. People will be asking you to grant them this role or a subset of its privileges. Once you see what the role can do, you will become VERY protective of it. My favorite 3-letter 4-letter word is ‘ANY’ and the DBA role is littered with privileges like this: ANY TABLE privs granted to DBA role So if this doesn’t freak you out, then maybe you should re-consider your career path. Or in other words, don’t be granting this role to ANYONE you don’t completely trust to take care of your database. If I’m just assigned a new database to manage, the first thing I might want to look at is just WHO has been assigned the DBA role. SQL Developer makes this easy to ascertain, just click on the ‘User Grantees’ panel. Who has the keys to your car? Making Changes to Roles and Users If you mouse-right-click on a user in the Tree, you can do individual tasks like grant a sys priv or expire an account. But, you can also use the ‘Edit User’ dialog to do a lot of work in one pass. As you click through options in these dialogs, it will build the ‘ALTER USER’ script in the SQL panel, which can then be executed or copied to the worksheet or to your .SQL file to be ran at your discretion. A Few Clicks vs a Lot of Typing These dialogs won’t make you a DBA, but if you’re pressed for time and you’re already in SQL Developer, they can sure help you make up for lost time in just a few clicks!

    Read the article

  • Running ODI 11gR1 Standalone Agent as a Windows Service

    - by fx.nicolas
    ODI 11gR1 introduces the capability to use OPMN to start and protect agent processes as services. Setting up the OPMN agent is covered in the following post and extensively in the ODI Installation Guide. Unfortunately, OPMN is not installed along with ODI, and ODI 10g users who are really at ease with the old Java Wrapper are a little bit puzzled by OPMN, and ask: "How can I simply set up the agent as a service?". Well... although the Tanuki Service Wrapper is no longer available for free, and the agentservice.bat script lost, you can switch to another service wrapper for the same result. For example, Yet Another Java Service Wrapper (YAJSW) is a good candidate. To configure a standalone agent with YAJSW: download YAJSW Uncompress the zip to a folder (called %YAJSW% in this example) Configure, start and test your standalone agent. Make sure that this agent is loaded with all the required libraries and drivers, as the service will not load dynamically the drivers added subsequently in the /drivers directory. Retrieve the PID of the agent process: Open Task Manager. Select View Select Columns Select the PID (Process Identifier) column, then click OK In the list of processes, find the java.exe process corresponding to your agent, and note its PID. Open a command line prompt in %YAJSW%/bat and run: genConfig.bat <your_pid> This command generates a wrapper configuration file for the agent. This file is called %YAJSW%/conf/wrapper.conf. Stop your agent. Edit the wrapper.conf file and modify the configuration of your service. For example, modify the display name and description of the service as shown in the example below. Important: Make sure to escape the commas in the ODI encoded passwords with a backslash! In the example below, the ODI_SUPERVISOR_ENCODED_PASS contained a comma character which had to be prefixed with a backslash. # Title to use when running as a console wrapper.console.title=\"AGENT\" #******************************************************************** # Wrapper Windows Service and Posix Daemon Properties #******************************************************************** # Name of the service wrapper.ntservice.name=AGENT_113 # Display name of the service wrapper.ntservice.displayname=ODI Agent # Description of the service wrapper.ntservice.description=Oracle Data Integrator Agent 11gR3 (11.1.1.3.0) ... # Escape the comma in the password with a backslash. wrapper.app.parameter.7 = -ODI_SUPERVISOR_ENCODED_PASS=fJya.vR5kvNcu9TtV\,jVZEt Execute your wrapped agent as console by calling in the command line prompt: runConsole.bat Check that your agent is running, and test it again.This command starts the agent with the configuration but does not install it yet as a service. To Install the agent as service call installService.bat From that point, you can view, start and stop the agent via the windows services. Et voilà ! Two final notes: - To modify the agent configuration, you must uninstall/reinstall the service. For this purpose, run the uninstallService.bat to uninstall it and play again the process above. - To be able to uninstall the agent service, you should keep a backup of the wrapper.conf file. This is particularly important when starting several services with the wrapper.

    Read the article

  • Building a Mafia&hellip;TechFest Style

    - by David Hoerster
    It’s been a few months since I last blogged (not that I blog much to begin with), but things have been busy.  We all have a lot going on in our lives, but I’ve had one item that has taken up a surprising amount of time – Pittsburgh TechFest 2012.  After the event, I went through some minutes of the first meetings for TechFest, and I started to think about how it all came together.  I think what inspired me the most about TechFest was how people from various technical communities were able to come together and build and promote a common event.  As a result, I wanted to blog about this to show that people from different communities can work together to build something that benefits all communities.  (Hopefully I've got all my facts straight.)  TechFest started as an idea Eric Kepes and myself had when we were planning our next Pittsburgh Code Camp, probably in the summer of 2011.  Our Spring 2011 Code Camp was a little different because we had a great infusion of some folks from the Pittsburgh Agile group (especially with a few speakers from LeanDog).  The line-up was great, but we felt our audience wasn’t as broad as it should have been.  We thought it would be great to somehow attract other user groups around town and have a big, polyglot conference. We started contacting leaders from Pittsburgh’s various user groups.  Eric and I split up the ones that we knew about, and we just started making contacts.  Most of the people we started contacting never heard of us, nor we them.  But we all had one thing in common – we ran user groups who’s primary goal is educating our members to make them better at what they do. Amazingly, and I say this because I wasn’t sure what to expect, we started getting some interest from the various leaders.  One leader, Greg Akins, is, in my opinion, Pittsburgh’s poster boy for the polyglot programmer.  He’s helped us in the past with .NET Code Camps, is a Java developer (and leader in Pittsburgh’s Java User Group), works with Ruby and I’m sure a handful of other languages.  He helped make some e-introductions to other user group leaders, and the whole thing just started to snowball. Once we realized we had enough interest with the user group leaders, we decided to not have a Fall Code Camp and instead focus on this new entity. Flash-forward to October of 2011.  I set up a meeting, with the help of Jeremy Jarrell (Pittsburgh Agile leader) to hold a meeting with the leaders of many of Pittsburgh technical user groups.  We had representatives from 12 technical user groups (Python, JavaScript, Clojure, Ruby, PittAgile, jQuery, PHP, Perl, SQL, .NET, Java and PowerShell) – 14 people.  We likened it to a scene from a Godfather movie where the heads of all the families come together to make some deal.  As a result, the name “TechFest Mafia” was born and kind of stuck. Over the next 7 months or so, we had our starts and stops.  There were moments where I thought this event would not happen either because we wouldn’t have the right mix of topics (was I off there!), or enough people register (OK, I was wrong there, too!) or find an appropriate venue (hmm…wrong there, too) or find enough sponsors to help support the event (wow…not doing so well).  Overall, everything fell into place with a lot of hard work from Eric, Jen, Greg, Jeremy, Sean, Nicholas, Gina and probably a few others that I’m forgetting.  We also had a bit of luck, too.  But in the end, the passion that we had to put together an event that was really about making ourselves better at what we do really paid off. I’ve never been more excited about a project coming together than I have been with Pittsburgh TechFest 2012.  From the moment the first person arrived at the event to the final minutes of my closing remarks (where I almost lost my voice – I ended up being diagnosed with bronchitis the next day!), it was an awesome event.  I’m glad to have been part of bringing something like this to Pittsburgh…and I’m looking forward to Pittsburgh TechFest 2013.  See you there!

    Read the article

  • Another sound not working post

    - by Thomas Smart
    Tried all the other "sound not working" posts i think, lost count. purge/reinstall alsa and pulse, reboot, add user to audio group, various lines in the alsa config file such as "options snd-hda-intel model=" then tried different options like generic, auto, basic, default, etc. tried pulseaudio -k && sudo alsa force-reload a few times, with and without rebooting. Hardware: 16gb ram, core I7-4790, Intel Haswell mboard with onboard sound and graphics Multimedia: Audio Adapter: HDA-Intel-HDA Intel HDMI OS: Ubuntu server 14.04 with ubuntu-desktop installed. GUI sound settings lists only the dummy sound card alsamixer -c 0 ¦ Card: HDA Intel HDMI F1: Help ¦ ¦ Chip: Intel Haswell HDMI F2: System information ¦ ¦ View: F3:[Playback] F4: Capture F5: All F6: Select sound card ¦ ¦ Item: S/PDIF ¦ ¦ +--+ ¦ ¦ ¦OO¦ ¦ ¦ +--+ ¦ ¦ < S/PDIF > ¦ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 aplay -L default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server hdmi:CARD=HDMI,DEV=0 HDA Intel HDMI, HDMI 0 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample mixing device dsnoop:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample snooping device hw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Hardware device with all software conversions cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7d14000 irq 46 cat /proc/asound/devices 1: : sequencer 2: [ 0- 3]: digital audio playback 3: [ 0- 0]: hardware dependent 4: [ 0] : control 33: : timer mplayer -ao alsa:device=hdmi /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '1' [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory [AO_ALSA] alsa-lib: conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory [AO_ALSA] alsa-lib: pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi [AO_ALSA] Playback open error: No such file or directory Failed to initialize audio driver 'alsa:device=hdmi' Could not open/initialize audio device -> no sound. Audio: no sound Video: no video Exiting... (End of file) mplayer -ao alsa:device=hw=0.3 /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] Format floatle is not supported by hardware, trying default. AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample) Video: no video Starting playback... A: 0.4 (00.4) of 0.8 (00.7) 0.1% Exiting... (End of file) Thank you for your time and help :)

    Read the article

  • Why Cornell University Chose Oracle Data Masking

    - by Troy Kitch
    One of the eight Ivy League schools, Cornell University found itself in the unfortunate position of having to inform over 45,000 University community members that their personal information had been breached when a laptop was stolen. To ensure this wouldn’t happen again, Cornell took steps to ensure that data used for non-production purposes is de-identified with Oracle Data Masking. A recent podcast highlights why organizations like Cornell are choosing Oracle Data Masking to irreversibly de-identify production data for use in non-production environments. Organizations often copy production data, that contains sensitive information, into non-production environments so they can test applications and systems using “real world” information. Data in non-production has increasingly become a target of cyber criminals and can be lost or stolen due to weak security controls and unmonitored access. Similar to production environments, data breaches in non-production environments can cost millions of dollars to remediate and cause irreparable harm to reputation and brand. Cornell’s applications and databases help carry out the administrative and academic mission of the university. They are running Oracle PeopleSoft Campus Solutions that include highly sensitive faculty, student, alumni, and prospective student data. This data is supported and accessed by a diverse set of developers and functional staff distributed across the university. Several years ago, Cornell experienced a data breach when an employee’s laptop was stolen.  Centrally stored backup information indicated there was sensitive data on the laptop. With no way of knowing what the criminal intended, the university had to spend significant resources reviewing data, setting up service centers to handle constituent concerns, and provide free credit checks and identity theft protection services—all of which cost money and took time away from other projects. To avoid this issue in the future Cornell came up with several options; one of which was to sanitize the testing and training environments. “The project management team was brought in and they developed a project plan and implementation schedule; part of which was to evaluate competing products in the market-space and figure out which one would work best for us.  In the end we chose Oracle’s solution based on its architecture and its functionality.” – Tony Damiani, Database Administration and Business Intelligence, Cornell University The key goals of the project were to mask the elements that were identifiable as sensitive in a consistent and efficient manner, but still support all the previous activities in the non-production environments. Tony concludes,  “What we saw was a very minimal impact on performance. The masking process added an additional three hours to our refresh window, but it was well worth that time to secure the environment and remove the sensitive data. I think some other key points you can keep in mind here is that there was zero impact on the production environment. Oracle Data Masking works in non-production environments only. Additionally, the risk of exposure has been significantly reduced and the impact to business was minimal.” With Oracle Data Masking organizations like Cornell can: Make application data securely available in non-production environments Prevent application developers and testers from seeing production data Use an extensible template library and policies for data masking automation Gain the benefits of referential integrity so that applications continue to work Listen to the podcast to hear the complete interview.  Learn more about Oracle Data Masking by registering to watch this SANS Institute Webcast and view this short demo.

    Read the article

  • How can I back up my ubuntu system?

    - by Eloff
    I'm sure there's a lot of questions on here similar to this, and I've been reading them, but I still feel this warrants a new question. I want nightly, incremental backups (full disk images would waste a lot of space - unless compressed somehow.) Preferably rotating or deleting old backups when running out of space or after a fixed number of backups. I want to be able to quickly and painlessly restore my system from these backups. This is my first time running ubuntu as my main development machine and I know from my experience with it as a server and in virtual machines that I regularly manage to make it unbootable or damage it to the point of being unable to rescue it. So how would you recommend I do this? There are so many options out there I really don't know where to start. There seems to be a vocal school of thought that it's sufficient to backup your home directory and the list of installed packages from the package manager. I've already installed lots of things from source, or outside of the package manager (development tools, ides, compilers, graphics drivers, etc.) So at the very least, if I do not back up the operating system itself I need to grab all config files, all program binaries, all created but required files, etc. I'd rather backup too much than too little - an ubuntu install is tiny anyway. Also this drastically reduces the restore time, which would cost me more in my time than the extra storage space. I tried using Deja Dup to backup the root partition, excluding some things like /mnt /media /dev /proc etc. Although many websites assured me you can backup a running linux system this way - that seems to be false as it complained that it could not backup the following files: /boot/System.map-3.0.0-17-generic /boot/System.map-3.2.0-22-generic /boot/vmcoreinfo-3.0.0-17-generic /boot/vmlinuz-3.0.0-17-generic /boot/vmlinuz-3.2.0-22-generic /etc/.pwd.lock /etc/NetworkManager/system-connections/LAN Connection /etc/apparmor.d/cache/lightdm-guest-session /etc/apparmor.d/cache/sbin.dhclient /etc/apparmor.d/cache/usr.bin.evince /etc/apparmor.d/cache/usr.lib.telepathy /etc/apparmor.d/cache/usr.sbin.cupsd /etc/apparmor.d/cache/usr.sbin.tcpdump /etc/apt/trustdb.gpg /etc/at.deny /etc/ati/inst_path_default /etc/ati/inst_path_override /etc/chatscripts /etc/cups/ssl /etc/cups/subscriptions.conf /etc/cups/subscriptions.conf.O /etc/default/cacerts /etc/fuse.conf /etc/group- /etc/gshadow /etc/gshadow- /etc/mtab.fuselock /etc/passwd- /etc/ppp/chap-secrets /etc/ppp/pap-secrets /etc/ppp/peers /etc/security/opasswd /etc/shadow /etc/shadow- /etc/ssl/private /etc/sudoers /etc/sudoers.d/README /etc/ufw/after.rules /etc/ufw/after6.rules /etc/ufw/before.rules /etc/ufw/before6.rules /lib/ufw/user.rules /lib/ufw/user6.rules /lost+found /root /run/crond.reboot /run/cups/certs /run/lightdm /run/lock/whoopsie/lock /run/udisks /var/backups/group.bak /var/backups/gshadow.bak /var/backups/passwd.bak /var/backups/shadow.bak /var/cache/apt/archives/lock /var/cache/cups/job.cache /var/cache/cups/job.cache.O /var/cache/cups/ppds.dat /var/cache/debconf/passwords.dat /var/cache/ldconfig /var/cache/lightdm/dmrc /var/crash/_usr_lib_x86_64-linux-gnu_colord_colord.102.crash /var/lib/apt/lists/lock /var/lib/dpkg/lock /var/lib/dpkg/triggers/Lock /var/lib/lightdm /var/lib/mlocate/mlocate.db /var/lib/polkit-1 /var/lib/sudo /var/lib/urandom/random-seed /var/lib/ureadahead/pack /var/lib/ureadahead/run.pack /var/log/btmp /var/log/installer/casper.log /var/log/installer/debug /var/log/installer/partman /var/log/installer/syslog /var/log/installer/version /var/log/lightdm/lightdm.log /var/log/lightdm/x-0-greeter.log /var/log/lightdm/x-0.log /var/log/speech-dispatcher /var/log/upstart/alsa-restore.log /var/log/upstart/alsa-restore.log.1.gz /var/log/upstart/console-setup.log /var/log/upstart/console-setup.log.1.gz /var/log/upstart/container-detect.log /var/log/upstart/container-detect.log.1.gz /var/log/upstart/hybrid-gfx.log /var/log/upstart/hybrid-gfx.log.1.gz /var/log/upstart/modemmanager.log /var/log/upstart/modemmanager.log.1.gz /var/log/upstart/module-init-tools.log /var/log/upstart/module-init-tools.log.1.gz /var/log/upstart/procps-static-network-up.log /var/log/upstart/procps-static-network-up.log.1.gz /var/log/upstart/procps-virtual-filesystems.log /var/log/upstart/procps-virtual-filesystems.log.1.gz /var/log/upstart/rsyslog.log /var/log/upstart/rsyslog.log.1.gz /var/log/upstart/ureadahead.log /var/log/upstart/ureadahead.log.1.gz /var/spool/anacron/cron.daily /var/spool/anacron/cron.monthly /var/spool/anacron/cron.weekly /var/spool/cron/atjobs /var/spool/cron/atspool /var/spool/cron/crontabs /var/spool/cups

    Read the article

  • Installation problem Ubuntu 12.04 Crashing hardware error

    - by user93640
    I am running on Ubuntu 8.04 for quite some time without many problems. About almost a year ago or so I have been trying to upgrade to 10.04 LTS, but without any success. Each time when trying to upgrade or even newly install the installation process crashed after about an hour or so (I forgot exactly how long). Now I wanted to try Ubuntu 12.04 (not even installing, but I only selected "Try Ubuntu without installing") and I got similar errors. I did not try to install it, because of earlier experience with 10.04 when after I also lost 8.04 and had to install from scratch again (after which it worked). I get the following screen (as I am not allowed to upload photos here the text): 26.767262] [Hardware Error]: CPU 0: Machine Check Exception: 0 Bank 5: b200001804000e0f 26.767279] [Hardware Error]: TSC 0 26.767287] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 0 microcode 44 26.767297] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767307] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 1: b200000000000175 26.767316] [Hardware Error]: TSC 0 26.767323] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767331] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767339] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 5: b200003000000e0f 26.767348] [Hardware Error]: TSC 0 26.767354] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767363] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767371] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 1: b200000000000175 26.767379] [Hardware Error]: TSC 1bf231e65f 26.767386] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767395] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767403] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 5: b200003008000e0f 26.767413] [Hardware Error]: TSC 1bf231e65f 26.767421] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767429] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767437] [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 5: b200001806000e0f 26.767447] [Hardware Error]: RIP |INEXACT| 60:<00000000c1018b5c> {mwait_idle+0x7c/0x1d0} 26.767464] [Hardware Error]: TSC 1bf231e674 26.767471] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 0 microcode 44 26.767480] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767487] [Hardware Error]: Machine check: Processor context corrupt 26.767495] Kernel panic - not syncing: Fatal Machine check 26.767505] Pid: 579, comm: debconf-communi Tainted: G M 3.2.0.29-generic-pae #46-Ubuntu 26.767515] Call Trace: 26.767525] [<c158f812>] ? printk+0x2d/0x2f 26.767534] [<c158f6e0>] panic+0x5c/0x161 26.767542] [<c10247ef>] mce_panic.part.14+0x13f/0x170 26.767551] [<c1024872>] mce_panic+0x52/0x90 26.767558] [<c1024a18>] mce_reign+0x168/0x170 26.767565] [<c1024bb5>] mce_end+0x105/0x110 26.767572] [<c10252db>] do_machine_check+0x32b/0x4f0 26.767581] [<c1024fb0>] ? mce_log+0x120/0x120 26.767590] [<c15a5e47>] error_code+0x67/0x6c 26.767602] panic occurred, switching back to text console 26.768498] Rebooting in 30 seconds.. For information, I have also tried earlier Arch Linux. I can install it, but when I try to install a window manager (LXDE) again I got similar errors. Fedora also crashes when installing and also Mandriva did not work for me. Therefore I think something deep in the machine might be wrong. But as stated above I can (clean) install 8.04 and also 9.10 can be installed without problems. Also updates for 8.04 can be installed. My machine is dual boot with XP next to it on a different partition. My HW: Memory : 2.0 GiB; Processor 0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; Processor 1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; How can I install Ubuntu 12.04? Last option would be to completely format my machine and install everything from scratch, but even I am not sure if that would solve it in the end. Can anybody help me out?

    Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >