Search Results

Search found 4170 results on 167 pages for 'dnfs 11g mount'.

Page 123/167 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• Can't Remove Logical Drive/Array from HP P400

  - by Myles

  This is my first post here. Thank you in advance for any assistance with this matter. I'm trying to remove a logical drive (logical drive 2) and an array (array "B") from my Smart Array P400. The host is a DL580 G5 running 64-bit Red Hat Enterprise Linux Server release 5.7 (Tikanga). I am unable to remove the array using either hpacucli or cpqacuxe. I believe it is because of "OS Status: LOCKED". The file system that lives on this array has been unmounted. I do not want to reboot the host. Is there some way to "release" this logical drive so I can remove the array? Note that I do not need to preserve the data on logical drive 2. I intend to physically remove the drives from the machine and replace them with larger drives. I'm using the cciss kernel module that ships with Red Hat 5.7. Here is some information pertaining to the host and the P400 configuration: [root@gort ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.7 (Tikanga) [root@gort ~]# uname -a Linux gort 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux [root@gort ~]# rpm -qa | egrep '^(hp|cpq)' cpqacuxe-9.30-15.0 hp-health-9.25-1551.7.rhel5 hpsmh-7.1.2-3 hpdiags-9.3.0-466 hponcfg-3.1.0-0 hp-snmp-agents-9.25-2384.8.rhel5 hpacucli-9.30-15.0 [root@gort ~]# hpacucli HP Array Configuration Utility CLI 9.30.15.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console. => ctrl all show config detail Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Cache Serial Number: PA82C0J9SVW34U RAID 6 (ADG) Status: Enabled Controller Status: OK Hardware Revision: D Firmware Version: 7.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Logical Drive: 1 Size: 136.7 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 35132 Strip Size: 128 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Unique Identifier: 600508B100184A395356573334550002 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 101 MB, /tmp 7.8 GB, /usr 3.9 GB, /usr/local 2.0 GB, /var 3.9 GB, / 2.0 GB, /local 113.2 GB OS Status: LOCKED Logical Drive Label: A0027AA78DEE Mirror Group 0: physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) Drive Type: Data Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM57RF40000983878FX Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 35 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM55VQC000098388524 Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 36 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Logical Drive: 2 Size: 546.8 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 256 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Completed Unique Identifier: 600508B100184A395356573334550003 Disk Name: /dev/cciss/c0d1 Mount Points: None OS Status: LOCKED Logical Drive Label: A5C9C6F81504 Drive Type: Data Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2H5PE00009802NK19 Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 37 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM28YY400009750MKPJ Model: HP DG146ABAB4 Current Temperature (C): 31 Maximum Temperature (C): 36 PHY Count: 1 PHY Transfer Rate: 3.0Gbps physicaldrive 2I:1:5 Port: 2I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FGYV00009802N3GN Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 38 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 2I:1:6 Port: 2I Box: 1 Bay: 6 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM8AFAK00009920MMV1 Model: HP DG146BB976 Current Temperature (C): 31 Maximum Temperature (C): 41 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:7 Port: 2I Box: 1 Bay: 7 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FJQD00009801MSHQ Model: HP DG146ABAB4 Current Temperature (C): 29 Maximum Temperature (C): 39 PHY Count: 1 PHY Transfer Rate: Unknown

  Read the article

• Error "fileid changed" when accessing files over NFS

  - by Roman Prikhodchenko

  I have an nfs-kernel-server configured and running on Ubuntu 10.04 Server. /export THIRD_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) SECOND_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) /export/ebs THIRD_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) SECOND_SERVER_IP(rw,nohide,insecure,no_subtree_check,async) I mounted the exported folder to the second server: mount -t nfs4 -o proto=tcp,port=2049 NFS_SERVER_IP_HERE:/ebs /ebs and it works just fine. I mounted it to the third server but I cannot access files from it. ls -l /ebs ls: reading directory /ebs: Stale NFS file handle total 0 The syslog on the third server says: kernel: [11575.483720] NFS: server NFS_SERVER_IP_HERE error: fileid changed kernel: [11575.483722] fsid 0:14: expected fileid 0x2, got 0x6e001 Some info: uname -r 2.6.32-312-ec2 uname -m i686

  Read the article

• Why should I use cobbler over normal PXEBOOT server?

  - by luckytaxi

  Maybe it's me but I find it easier to manage my simple pxeboot server just by editing the default file under /tftpboot/pxelinux.cfg. I have my kickstart file available over NFS along with the DVD extracted to a centralize mount point. Other than PXEBOOT, what benefit would I get from running cobbler? It was confusing at first but I finally got the hang off it. The only benefit I see is being able to force a server to install an OS on demand. Anything else?

  Read the article

• Read Linux-formatted (ext3) EBS volume mounted on Windows Server 2008 instance

  - by Greg Owen

  I've got a Windows Server 2008 R2 instance set up in Amazon EC2. I've also got some Ubuntu instances on the same EC2 account. I'd like to be able to mount the EBS volume from one of the Ubuntu instances onto the Windows instance as an external drive and then access that drive from the Windows instance. I've looked at tools like ext2fsd and ext2 IFS, but these haven't worked (I couldn't get the former to work, and the latter says that it supports Windows 2008 but gives an error when I try to install it, saying that it only supports up to Windows 2003). I know that there are all kinds of tools to view Linux partitions and that there are filesystems that are compatible with both Linux and Windows, but neither of those options works here (I want to be able to attach and detach the Ubuntu volumes on command, rather than have a permanent partition, and Ubuntu EBS volumes are ext3 by default). Anybody know a good tool I should use?

  Read the article

• Rails won't install on Ubuntu because of builder

  - by Jason Swett

  Can someone explain why gem thinks I don't have builder = 2.1.2 even though I clearly have 3.0.0? jason@ve:~$ gem install rails --pre ERROR: Error installing rails: activemodel requires builder (~> 2.1.2, runtime) jason@ve:~$ gem list *** LOCAL GEMS *** abstract (1.0.0) activesupport (3.0.3, 3.0.0.rc2) builder (3.0.0) erubis (2.6.6) i18n (0.5.0) mail (2.2.13) memcache-client (1.8.5) mime-types (1.16) polyglot (0.3.1) rack (1.2.1) rack-mount (0.6.13) rack-test (0.5.6) text-format (1.0.0) text-hyphen (1.0.0) treetop (1.4.9) tzinfo (0.3.23) jason@ve:~$

  Read the article

• Windows XP-64 loses audio sounds, drive letters... why?

  - by Ira Baxter

  Until sometime in early December, I had a wonderfully functioning XP-64 system. It was configured to auto download/install MS patches. I occassionally update the software on it, e.g. Open Office, Adobe Reader, Skype, but I don't fetch hundreds of tools or anything much beyond what I just mentioned. In December, suddenly my audio stopped, and drive letters assigned to various mount points on other machines quit being available. Apparantly, the services that support these (and some others) are now not starting up when I boot/login. There isn't anything obvious in the event log. If I manually restart the associated services, these facilities come back on line and work for awhile (a day) but pretty soon the problem reappears. I don't reboot very often, nor do I log out out much. Hints?

  Read the article

• Rack Equipment that is Non-Integer Rack Units Tall

  - by alx9r

  I came across these two items of non-integer rack unit height: 1. This rack mount kit which seems to be trying to make the best of the slightly-taller-than-1U form factor of the Cisco ASA5505. 2. This 1.5U Server Case that espouses the merits of a case height between 1RU and 2RU. My questions are as follows: A. (1) seems to protrude 1/8 RU above and below the rack unit it is bolted in. Is there any way to make use of the 7/8 RU remaining above and below? Or would using that bracket effectively consume 3 RU? B. Are there any gotchas I should be aware of (like rack rail bolt patterns not working out, etc) when I consider one of these non-integer RU server cases like (2)?

  Read the article

• Recovering with DDRescue Cannot Complete (write error: Read-only file system)

  - by c00lryguy

  I'm trying to recover a corrupt VDI using vdfuse to mount the VDI and using dd_rescue to rescue the borked partition. dd_rescue seems to be working fine but once it reached about half of the partition, it just STOPs and gives the following error: ddrescue: write error: Read-only file system Wait.. what? It suddenly turns the FS it is writing the recovered partition to into a read-only file system. Well... why? Will I never be able to finish this? What's going on?

  Read the article

• Oracle on NFS vmdk beats native NFS!?

  - by fletch00

  Hi, my colleagues are pursuing this with Netapp and Oracle - but I thought I'd post here on the off chance someone else has seen this We have a RedHat 5 VM (fully up2date) running Oracle 11i with data disks mounted via the VM's linux kernel NFS using Oracle's recommended mount options and the performance is very inconsistent (Querys that should take < 2 seconds sometimes take 60 seconds) Funny thing is we can run the same queries perfectly consistently < 2 seconds on a VMDK residing on SAME NetApp NFS datastore! Makes me wish Oracle and NetApp collaborated as closely as VMware and NetApp did on the Virtual Storage Console we used to perfectly set the NFS options and keep them in compliance... We have tried a few Linux NFS options others have posted and not seen improvement so far. We are now creating VMDK's for the VM to replace the Linux NFS mounted and workaround the issue as our developers need consistent performance ASAP.

  Read the article

• Installing Fedora 11 fIlesystem from ISO in to a VM image

  - by okhalid

  Hi, I need to install Fedora 11 in my monitor-less linux box which is running some where in a data center. I will use Fedora 11 as a virtual machine. What I already know/have: 1) How to create LVM partitions and create ext3 filesystem 2) Mount the LVM partition and ISO image 3) Run the partition with Xen as a virtual machine What I need: 1) I need to install Fedora ll file system into an lvm partition (let's say /dev/fedora11) from an ISO image so that I have all the directories /root, /bin, /sys etc etc under /dev/fedora11 Any help would be much appreciated! NOTE: I don't have a monitor for this server, so I need to do it via SSH

  Read the article

• moving dynamic disk from Windows to another Windows computer when original Windows is not available

  - by Andrei

  How do I mount dynamic disk on new system without access to the old OS ? I need to move Dynamic data disk from old Windows XP (Pro, SP3) system, where disk crashed, to new Windows system without having access to the old OS. On new system, Dynamic disk shows as "Dynamic - Foreign". Microfoft has instructions for moving Dynamic Disk [1]. But Microsoft assumes having access to the old system. But I do not have acess to the old system. I am struck with "Dynamic - Foreign" static of the disk on new system. Thanks WinXP Pro SP3 [1] http://technet.microsoft.com/en-us/library/cc779854(WS.10).aspx Move Disk to another computer.

  Read the article

• Windows 2008 and Truecrypt: can't access shared folder called "media"

  - by Sajee

  On my Windows 2008 system, I've attached an external USB drive that's encrypted using Truecrypt. Once I mounted the Truecrypt drive, I share some of the directories from that drive using Windows file sharing. I tried sharing a folder called "media" and when I try to access that folder from a Vista client on my LAN via \myserver\media, I get this error: \myserver\media is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. An unexpected network error occurred. If I share the folder media under some name such as fizzbuzz then I can access \myserver\fizzbuzz w/o any errors. Any clues as to why this is happening? Related: http://serverfault.com/questions/27684/windows-2008-and-truecrypt-how-to-automatically-mount-shared-folders-after-rest

  Read the article

• portable cross-platform WebDAV Client

  - by theduke

  I am looking for a portable application that will allow me to do this: Browse a WebDAV share and open a file. Edit the file locally. Save the file, and automatically propagate the change to WebDAV. Is there any CROSS-PLATFORM application out there that will let me do this and exists as a portable? The reason I need this functionality is that I regularily have to access files via WebDAV from public machines where I do not have the neccessary permissions to natively mount a webdav share, or to install the neccessary components.

  Read the article

• Wildcards not being substituted

  - by user21463

  #!/bin/bash loc=`echo ~/.gvfs/*/DCIM/100_FUJI` rm -f /mnt/fujifilmA100 ln -s "$loc" /mnt/fujifilmA100 For some reason the variable * doesn't get substituted with the only possible value and gets given the value /home/chris/.gvfs/*/DCIM/100_FUJI. Does anyone have an idea of why? Please note: If global expansion fails, the pattern is not substituted. I ran the commands: chris@comp2008:~$ loc=`echo ~/.gvfs/*/DCIM/100_FUJI ` chris@comp2008:~$ echo $loc /home/chris/.gvfs/gphoto2 mount on usb%3A001,008/DCIM/100_FUJI So we can see the expansion should work I have now switched to using: loc = `find ~/.gvfs -name 100_FUJI ` I am just curious why it doesn't work as is. Debugging output using sh -x echo /home/chris/.gvfs/*/DCIM/100_FUJI loc=/home/chris/.gvfs/*/DCIM/100_FUJI rm -f /mnt/fujifilmA100 ln -s /home/chris/.gvfs/*/DCIM/100_FUJI/mnt/fujifilmA100

  Read the article

• How to install gnome desktop from dvd on Centos 6 using command line?

  - by alwbtc

  I have installed Centos 6 to Virtualbox. Although I have chosen to install General Purpose Gnome Desktop, Gnome desktop does not start. All I get is a black and white text prompt. I would like to know how I can install Gnome Desktop from Centos dvd iso image? How do I mount the dvd image to virtual machine linux? How do I install Gnome desktop from command line? If I already have Gnome Desktop installed, why doesn't it start? How can I check from command line that I have Gnome installled? This virtual machine does not have internet connection, that's why I want to install the Gnome Desktop from dvd. Best Regards

  Read the article

• Slow NFS transfer performance of small files

  - by Arie K

  I'm using Openfiler 2.3 on an HP ML370 G5, Smart Array P400, SAS disks combined using RAID 1+0. I set up an NFS share from ext3 partition using Openfiler's web based configuration, and I succeeded to mount the share from another host. Both host are connected using dedicated gigabit link. Simple benchmark using dd: $ dd if=/dev/zero of=outfile bs=1000 count=2000000 2000000+0 records in 2000000+0 records out 2000000000 bytes (2.0 GB) copied, 34.4737 s, 58.0 MB/s I see it can achieve moderate transfer speed (58.0 MB/s). But if I copy a directory containing many small files (.php and .jpg, around 1-4 kB per file) of total size ~300 MB, the cp process ends in about 10 minutes. Is NFS not suitable for small file transfer like above case? Or is there some parameters that must be adjusted?

  Read the article

• How to access shared folder between CentOS 6 and WinXP under vmware player 4

  - by q0987

  Based on Sharing Files between CentOS 6 and Windows Systems with Samba I am able to follow until section of "Accessing Samba Shares". however, my system is WinXP and I don't see CentOS 6 icon at all. In my left panel of explorer, I only see "My network places". For section "Accessing Windows Shares from CentOS 6", after I click workgroup, I only see a localhost icon. When I click this icon, I see "unable to mount location" error from CentOS. BTW: I have set the shared folder within WMWare Player 6.0. Whatelse I have to do in order to make the shared folder work? Thank you

  Read the article

• OSX 10.6 Give Apache2 read&write access to mounted windows share

  - by JohEngstrom

  On Mac OS X Snow Leopard I'm trying to give the apache2 user _www full rights to a mounted hidden windows server share. I've used Connect to Server with smb://servername/share$ and saved the username/password in the keychain. The domain username used for the mount got full rights to the share on the windows server. It all works this far. I can browse and edit the files in the share from the Mac. However I can't find a way to give the apache2 user _www rights to write to the mounted share. I have a perl script that is supposed to create a file in the mounted folder but only get permission denied. I've tried all kinds of chmod and chown but it doesn't change the permissions of the share. Does anyone know how this can be done please?

  Read the article

• Disabling partition just for one OS on multi-boot system

  - by Emiswelt

  Hi Regarding to the solution there: http://serverfault.com/questions/36385/how-can-i-mount-a-hard-drive-as-read-only-on-windows-xp I have a system with three partitions. One runs windows 7, one runs windows XP and is for some experimental programming and testing. I don't want to mess up anything, so I am going to disable the windows 7 partition like described on the linked page above from windows XP to protect the operating system. When I do this, is the windows 7 partition only disabled for the running XP os, or is the windows 7 partition rendered unbootable? with best regards

  Read the article

• [tcp] :/: RPCPROG_NFS: RPC: Program not registered

  - by frankcheong

  I tried to share the root / from a fedora 9 to a freeBSD while when I tried to mount the / folder it complained with "[tcp] nfs_server:/: RPCPROG_NFS: RPC: Program not registered". I followed the below steps to setup on the fedora nfs server:- Add the below line inside the /etc/exports / nfs_client(rw,no_root_squash,sync) restart the nfs related service service portmapper restart service nfslock restart service nfs restart export the filesystem using the below command:- exportfs -arv On the nfs client, I have troubleshoot using the below command:- rpcinfo -p nfs_server program vers proto port service 100000 2 tcp 111 rpcbind 100000 2 udp 111 rpcbind 100024 1 udp 32816 status 100024 1 tcp 34173 status 100011 1 udp 817 rquotad 100011 2 udp 817 rquotad 100011 1 tcp 820 rquotad 100011 2 tcp 820 rquotad 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100021 1 udp 32818 nlockmgr 100021 3 udp 32818 nlockmgr 100021 4 udp 32818 nlockmgr 100005 1 udp 32819 mountd 100005 1 tcp 34174 mountd 100005 2 udp 32819 mountd 100005 2 tcp 34174 mountd 100005 3 udp 32819 mountd 100005 3 tcp 34174 mountd showmount -e nfs_client Exports list on nfs_server: / nfs_client What else did I missed?

  Read the article

• How can I get VirtualBox Guest Additions installed in an Ubuntu 9.10 server?

  - by sutch

  I have a freshly installed Ubuntu 9.10 server installed within a VirtualBox VM instance. From the VirtualBox menu bar, I selected Devices: Install Guest Additions... Then performed the following commands: > sudo apt-get install -y build-essential linux-headers-$(uname -r) > sudo mount /dev/cdrom /mnt/ > sudo /mnt/VBoxLinuxAdditions-amd64.run After some successful looking results, the following error is displayed: Installing the Window System drivers ...fail! (Could not find the X.Org or XFree86 Window System.) After restarting, I was looking forward to some UI integration with my host desktop (resize window, not needing to press right-Ctrl to escape the client window, and having copy and paste functionality. Is it possible to install the Guest Additions without the X Window overhead (I plan to only use for shell commands)? If additional packages are required, which ones?

  Read the article

• UAC-account-users can't see their mounted network-drives

  - by Daniel

  I wrote a few login batches in the Group Policy Management which mount specified devices to specified usergroups. The batches work as they should as long UAC is disabled. My problem is that the UAC-account-users can't see their mounted network-drives because the login scripts run in elevated context. I tried to fix the problem with PsExec (-l) so that the network-folders are mapped with limited user rigths. But it seems that this won't work. (PsExec is already installed on all computers so it can work local.) Has anyone an idea how to fix that problem? I spended a long time in trying to fix the problem but I did not find any solutions about THIS problem.

  Read the article

• XenServer: Editing clone configuration before boot

  - by Jeff Ferland

  Upon cloning a base image, I need to reconfigure basic settings. Regenerating the ssh host key, changing static IP assignments, setting the host name, etc. Because of the network setup, DHCP is not an option. That more or less rules out SSHing in with a predefined key or running a startup script since I can't provide the IP externally. I'd most like to mount the filesystem of the new machine on Dom0, but the lvm volumes are exported and it appears to be Bad Form to import them so the Dom0 machine can see them. What's your best suggestion for altering files in a cloned VM before boot? Must be non-interactive, and I'm going to guess out the gate that scripting access via xe console is not going to work well.

  Read the article

• software RAID array not starting in initramfs on Debian

  - by Jasper

  One of my Debian servers (kernel 2.6.30-AMD64) refuses to start the software RAID array that houses the root partition in initramfs. It dumps me with a busybox console. When I follow the necessary steps to continue booting it works fine (start the array with mdadm -A and then have LVM scan the volumes with pvscan and then vgchange -ay). I've tried starting with boot options rootdelay=10 to no avail. Also I've updated the initramfs and unpacked it to inspect whether it really tries to assemble the raid array (it does). Output before dumping to console : mount: mounting none on /dev failed: No such device W: devtmpfs not available, falling back to tpmfs for /dev and then some lvm messages saying it can't find the volumes holding the root partitions. Does anybody have a clue how I could fix this?

  Read the article

• How do you create large, growable, shared filesystems on Linux at AWS?

  - by Reece

  What are acceptable/reasonable/best ways to provide large, growable, shared storage at AWS, exposed as a single filesystem? We're currently making 1TB EBS volumes ~biweekly and NFS exporting with no_subtree_check and nohide. In this setup, distinct exports appear under a single mount on the client. This arrangement does not scale well. The options we've considered: LVM2 with ext4. resize2fs is too slow. Btrfs on Linux. not obviously ready for prime time yet. ZFS on Linux. not obviously ready for prime time yet (although LLNL uses it) ZFS on Solaris. future of this combo is uncertain (to me), and new OS in the mix glusterfs. heard mostly good but two scary (and maybe old?) stories. The ideal solution would provide sharing, a single fs view, easy expandability, snapshots, and replication. Thanks for sharing ideas and experience.

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >