Search Results

Search found 4501 results on 181 pages for 'vostro 1000'.

Page 123/181 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• Threading Overview

  - by ACShorten

  One of the major features of the batch framework is the ability to support multi-threading. The multi-threading support allows a site to increase throughput on an individual batch job by splitting the total workload across multiple individual threads. This means each thread has fine level control over a segment of the total data volume at any time. The idea behind the threading is based upon the notion that "many hands make light work". Each thread takes a segment of data in parallel and operates on that smaller set. The object identifier allocation algorithm built into the product randomly assigns keys to help ensure an even distribution of the numbers of records across the threads and to minimize resource and lock contention. The best way to visualize the concept of threading is to use a "pie" analogy. Imagine the total workset for a batch job is a "pie". If you split that pie into equal sized segments, each segment would represent an individual thread. The concept of threading has advantages and disadvantages: Smaller elapsed runtimes - Jobs that are multi-threaded finish earlier than jobs that are single threaded. With smaller amounts of work to do, jobs with threading will finish earlier. Note: The elapsed runtime of the threads is rarely proportional to the number of threads executed. Even though contention is minimized, some contention does exist for resources which can adversely affect runtime. Threads can be managed individually – Each thread can be started individually and can also be restarted individually in case of failure. If you need to rerun thread X then that is the only thread that needs to be resubmitted. Threading can be somewhat dynamic – The number of threads that are run on any instance can be varied as the thread number and thread limit are parameters passed to the job at runtime. They can also be configured using the configuration files outlined in this document and the relevant manuals.Note: Threading is not dynamic after the job has been submitted Failure risk due to data issues with threading is reduced – As mentioned earlier individual threads can be restarted in case of failure. This limits the risk to the total job if there is a data issue with a particular thread or a group of threads. Number of threads is not infinite – As with any resource there is a theoretical limit. While the thread limit can be up to 1000 threads, the number of threads you can physically execute will be limited by the CPU and IO resources available to the job at execution time. Theoretically with the objects identifiers evenly spread across the threads the elapsed runtime for the threads should all be the same. In other words, when executing in multiple threads theoretically all the threads should finish at the same time. Whilst this is possible, it is also possible that individual threads may take longer than other threads for the following reasons: Workloads within the threads are not always the same - Whilst each thread is operating on the roughly the same amounts of objects, the amount of processing for each object is not always the same. For example, an account may have a more complex rate which requires more processing or a meter has a complex amount of configuration to process. If a thread has a higher proportion of objects with complex processing it will take longer than a thread with simple processing. The amount of processing is dependent on the configuration of the individual data for the job. Data may be skewed – Even though the object identifier generation algorithm attempts to spread the object identifiers across threads there are some jobs that use additional factors to select records for processing. If any of those factors exhibit any data skew then certain threads may finish later. For example, if more accounts are allocated to a particular part of a schedule then threads in that schedule may finish later than other threads executed. Threading is important to the success of individual jobs. For more guidelines and techniques for optimizing threading refer to Multi-Threading Guidelines in the Batch Best Practices for Oracle Utilities Application Framework based products (Doc Id: 836362.1) whitepaper available from My Oracle Support

  Read the article

• SQL SERVER – What are Actions in SSAS and How to Make a Reporting Action

  - by Pinal Dave

  Actions are used for customized browsing and drilling of data for the end-user. It’s an event that a user can raise while accessing the cube data. They are used in cube browsers like excel and are triggered when a user in a client tool clicks on a particular member, level, dimension, cells or may be the cube itself.  For example a user might be able to see a reporting services report, open a web page or drill through to detailed information related to the cube data. Analysis server supports 3 types of actions :- Report Drill-through Standard Actions In this blog post, I will explain the Reporting  action. The objective of this action is to return a report with details of the product where the sales amount is greater than 1000 in cube browser analysis. You need to create a basic cube first with the facts and dimensions you want in the analysis. Following are the steps to create reporting action. Go to SQL server data tools and open the analysis services project. Navigate to actions and click on new reporting action. 2.) Specify the name of the action and choose target type as attribute members since we have to create the action on members for a attribute. 3.) Specify the Target object of your report action. Target object would be the dimension or attribute on which you want the report to appear. In our case it is product name. 4.) Next you have to define the condition on which you want the report link to appear. However, this is an optional feature. In this example we are specifying a condition, which will check if the sales amount is greater than 10,000. So, that the link appears only for those products where the defined condition is met. 5.) Next you have to specify the server name on which the report is present, report path  and the report format in which you want the report to appear. 6.) Additionally you can specify the parameters. As with conditional expression, the parameters should be a valid MDX expression. The parameter name should be same as the one defined in the report. 7.) Deploy your solution after you are done with specifying parameters and go to the cube browser. 8.) Click on the analyze in excel button, this will open your cube in excel 9.) Make an analysis which shows product names and their sales amount. 10.) Right click on a product where sales amount is greater than 10000 you will see the reporting action link. Click on that and you will be taken to your reporting services report. 11.) Clicking on the link will take you to the URL of the report. I created this report using report project wizard in SQL server data tools. So, this is how we can launch reports from a cube browser. Similarly you can open web pages, run applications and a number of  other tasks. Koenig Solutions offers SSAS training which contains all Analysis Services including Reporting in great detail. In my next blog post I will talk about drill-through actions. Author: Namita Sharma, Senior Corporate Trainer at Koenig Solutions. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSAS

  Read the article

• Terminal Colors Not Working

  - by Matt Fordham

  I am accessing an Ubuntu 10.04.2 LTS server via SSH from OSX. Recently the colors stopped working. I think it happened while I was installing/troubleshooting RVM, but I am not positive. In .bashrc I uncommeneted force_color_prompt=yes, and when I run env | grep TERM I get TERM=xterm-color. But still no colors. Any ideas? Thanks! Here is the output of cat .bashrc # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' alias dir='dir --color=auto' alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi [[ -s "/usr/local/rvm/scripts/rvm" ]] && . "/usr/local/rvm/scripts/rvm"

  Read the article

• Mass Metadata Updates with Folders

  - by Kyle Hatlestad

  With the release of WebCenter Content PS5, a new folder architecture called 'Framework Folders' was introduced.  This is meant to replace the folder architecture of 'Folders_g'.  While the concepts of a folder structure and access to those folders through Desktop Integration Suite remain the same, the underlying architecture of the component has been completely rewritten.  One of the main goals of the new folders is to scale better at large volumes and remove the limitations of 1000 content items or sub-folders within a folder.  Along with the new architecture, it has a new look and a few additional features have been added.  One of those features are Query Folders.  These are folders that are populated simply by a query rather then literally putting items within the folders.  This is something that the Library has provided, but it always took an administrator to define them through the Web Layout Editor.  Now users can quickly define query folders anywhere within the standard folder hierarchy.   Within this new Framework Folders is the very handy ability to do metadata updates.  It's similar to the Propagate feature in Folders_g, but there are some key differences that make this very flexible and much more powerful. It's used within regular folders and Query Folders.  So the content you're updating doesn't all have to be in the same folder...or a folder at all.   The user decides what metadata to propagate.  In Folders_g, the system administrator controls which fields will be propagated using a single administration page.  In Framework Folders, the user decides at that time which fields they want to update. You set the value you want on the propagation screen.  In Folders_g, it used the metadata defined on the parent folder to propagate.  With Framework Folders, you supply the new metadata value when you select the fields you want to update.  It does not have to be defined on the parent folder. Because of these differences, I think the new propagate method is much more useful.  Instead of always having to rely on Archiver or a custom spreadsheet, you can quickly do mass metadata updates right within folders.   Here are the basic steps to perform propagation. First create a folder for the propagation.  You can use a regular folder, but a Query Folder will work as well. Go into the folder to get the results.   In the Edit menu, select 'Propagate'. Select the check-box next to the field to update and enter the new value  Click the Propagate button. Once complete, a dialog will appear showing it is complete What's also nice is that the process happens asynchronously in the background which means you can browse to other pages and do other things while it is still working.  You aren't stuck on the page waiting for it to complete.  In addition, you can add a configuration flag to the server to turn on a status indicator icon.  Set 'FldEnableInProcessIndicator=1' and it will show a working icon as its doing the propagation. There is a caveat when using the propagation on a Query Folder.   While a propagation on a regular folder will update all of the items within that folder, a Query Folder propagation will only update the first 50 items.  So you may need to run it multiple times depending on the size...and have the query exclude the items as they get updated. One extra note...Framework Folders is offered as the default folder architecture in the PS5 release of WebCenter Content.  But if you are using WebCenter Content integrated with another product that makes use of folders (WebCenter Portal/Spaces, Fusion Applications, Primavera, etc), you'll need to continue using Folders_g until they are updated to use the new folders.

  Read the article

• OpenGL not rendering my images to the screen

  - by Brendan Webster

  for some reason my game isn't showing the image I am rendering to the screen. My engine is state based, and at the beginning I set the logo, but it isn't showing on the screen. Here is my method of doing so first I create one image and assign some values to it's preset values. //create one image instance for the logo background O_File.v_Create_Images(1); //set the atributes of the background //first Image O_File.sImage[0].nImageDepth = -30.0f; O_File.sImage[0].sImageLocation = "image.bmp"; //load the images int O_File.v_Load_Images(); Then I load them with DevIL void C_File_Manager::v_Load_Images() { ilGenImages(1, &image); ilBindImage(image); for(int i = 0;i < sImage.size();i++) { success = ilLoadImage(sImage[i].sImageLocation.c_str()); if (success) { success = ilConvertImage(IL_RGBA, IL_UNSIGNED_BYTE); glGenTextures(1, &image); glBindTexture(GL_TEXTURE_2D, image); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexImage2D(GL_TEXTURE_2D, 0, 4, ilGetInteger(IL_IMAGE_WIDTH), ilGetInteger(IL_IMAGE_HEIGHT), 0, ilGetInteger(IL_IMAGE_FORMAT), GL_UNSIGNED_BYTE, ilGetData()); //asign values to the width and height of the image if they are already not assigned if(sImage[i].nImageHeight == 0) sImage[i].nImageHeight = ilGetInteger(IL_IMAGE_HEIGHT); if(sImage[i].nImageWidth == 0) sImage[i].nImageWidth = ilGetInteger(IL_IMAGE_WIDTH); std::cout << sImage[i].nImageHeight << std::endl; const std::string word = sImage[i].sImageLocation.c_str(); std::cout << sImage[i].sImageLocation.c_str() << std::endl; ilLoadImage(word.c_str()); ilDeleteImages(1, &image); } } } and then I apply them to the screen void C_File_Manager::v_Apply_Images() { glMatrixMode(GL_MODELVIEW); glLoadIdentity(); for(int i = 0;i < sImage.size();i++) { //move the image to where it should be on the screen; glTranslatef(sImage[i].nImageX,sImage[i].nImageY,sImage[i].nImageDepth); //rotate image around the 3 axes glRotatef(sImage[i].fImageAngleX,1,0,0); glRotatef(sImage[i].fImageAngleY,0,1,0); glRotatef(sImage[i].fImageAngleZ,0,0,1); //scale the image glScalef(1,1,1); //center the image glTranslatef((sImage[i].nImageWidth/2),(sImage[i].nImageHeight/2),0); //draw the box that will encase the loaded image glBegin(GL_QUADS); //change the color of the loaded image; glColor4f(1,1,1,1); //top left corner of image glNormal3f(0.0,0,0.0); glTexCoord2f (1.0, 0.0); glVertex3f(0,0,sImage[i].nImageDepth); //top right corner of image glNormal3f(1.0,0,0.0); glTexCoord2f (1.0, 1.0); glVertex3f(0,sImage[i].nImageHeight,sImage[i].nImageDepth); //bottom right corner of image glNormal3f(-1.0,0,0.0); glTexCoord2f (0.0, 1.0); glVertex3f(sImage[i].nImageWidth,sImage[i].nImageHeight,sImage[i].nImageDepth); //bottom left corner of image glNormal3f(-1.0,0,0.0); glTexCoord2f(0.0, 0.0); glVertex3f(sImage[i].nImageWidth,0,sImage[i].nImageDepth); glEnd(); } } when I debug there is no errors at all, but yet the images don't show up on the screen, I have positioned the camera at (0,0,-1) and that is where the images should show up. the clipping plane is set 1 to 1000. There is probably some random problem with the code, but I just can't catch it.

  Read the article

• Indexed view deadlocking

  - by Dave Ballantyne

  Deadlocks can be a really tricky thing to track down the root cause of.  There are lots of articles on the subject of tracking down deadlocks, but seldom do I find that in a production system that the cause is as straightforward.  That being said,  deadlocks are always caused by process A needs a resource that process B has locked and process B has a resource that process A needs.  There may be a longer chain of processes involved, but that is the basic premise. Here is one such (much simplified) scenario that was at first non-obvious to its cause: The system has two tables,  Products and Stock.  The Products table holds the description and prices of a product whilst Stock records the current stock level. USE tempdb GO CREATE TABLE Product ( ProductID INTEGER IDENTITY PRIMARY KEY, ProductName VARCHAR(255) NOT NULL, Price MONEY NOT NULL ) GO CREATE TABLE Stock ( ProductId INTEGER PRIMARY KEY, StockLevel INTEGER NOT NULL ) GO INSERT INTO Product SELECT TOP(1000) CAST(NEWID() AS VARCHAR(255)), ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM sys.columns a CROSS JOIN sys.columns b GO INSERT INTO Stock SELECT ProductID,ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM Product There is a single stored procedure of GetStock: Create Procedure GetStock as SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 Analysis of the system showed that this procedure was causing a performance overhead and as reads of this data was many times more than writes,  an indexed view was created to lower the overhead. CREATE VIEW vwActiveStock With schemabinding AS SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 go CREATE UNIQUE CLUSTERED INDEX PKvwActiveStock on vwActiveStock(ProductID) This worked perfectly, performance was improved, the team name was cheered to the rafters and beers all round.  Then, after a while, something else happened… The system updating the data changed,  The update pattern of both the Stock update and the Product update used to be: BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT It changed to: BEGIN TRAN UPDATE... UPDATE... UPDATE... COMMIT Nothing that would raise an eyebrow in even the closest of code reviews.  But after this change we saw deadlocks occuring. You can reproduce this by opening two sessions. In session 1 begin transaction Update Product set ProductName ='Test' where ProductID = 998 Then in session 2 begin transaction Update Stock set Stocklevel = 5 where ProductID = 999 Update Stock set Stocklevel = 5 where ProductID = 998 Hop back to session 1 and.. Update Product set ProductName ='Test' where ProductID = 999 Looking at the deadlock graphs we could see the contention was between two processes, one updating stock and the other updating product, but we knew that all the processes do to the tables is update them.  Period.  There are separate processes that handle the update of stock and product and never the twain shall meet, no reason why one should be requiring data from the other.  Then it struck us,  AH the indexed view. Naturally, when you make an update to any table involved in a indexed view, the view has to be updated.  When this happens, the data in all the tables have to be read, so that explains our deadlocks.  The data from stock is read when you update product and vice-versa. The fix, once you understand the problem fully, is pretty simple, the apps did not guarantee the order in which data was updated.  Luckily it was a relatively simple fix to order the updates and deadlocks went away.  Note, that there is still a *slight* risk of a deadlock occurring, if both a stock update and product update occur at *exactly* the same time.

  Read the article

• Slow wired internet connection on Realtek RTL8168-8111 (Rev 6)

  - by Mark

  I keep on seeing issues people are having with their wireless. I am having an issue with being wired into my router. I installed Ubuntu 11.10 the other day, on my custom PC. The motherboard I have installed on this PC is an ASUS P8H61-M. The issue I am having is with my speed. I have a dual boot, windows 7 and the new Ubuntu. On my Windows install I am getting test speeds from Speakeasy at 17Mbps and actual downloads around 2-3MB/s. With Ubuntu, I am getting test speeds from Speakeasy at 1.14Mbps and actual downloads around 60KB/s. I have disabled IPv6 and am no using GoogleDNS for my DNS, but it hasn't resolved the issue. I have scanned my router (WRT54GS Linksys) to disable IPv6 connections, and I am not seeing any option for that. I cannot figure out why I am getting such sluggish internet connection. Any help to resolve would be great! I performed an iconfig -a with these results: mark@Mark-ASUS:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr f4:6d:04:d1:2c:4e inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fed1:2c4e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21888 errors:0 dropped:21888 overruns:0 frame:21888 TX packets:21068 errors:0 dropped:90 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26348337 (26.3 MB) TX bytes:2217140 (2.2 MB) Interrupt:46 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:952 (952.0 B) TX bytes:952 (952.0 B) My specs are: mark@Mark-ASUS:~$ sudo lspci -nn 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 06:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1080] (rev 01) udev information: KERNEL[11.351405] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 UDEV [11.363905] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 ID_VENDOR_FROM_DATABASE=Realtek Semiconductor Co., Ltd. ID_MODEL_FROM_DATABASE=RTL8111/8168B PCI Express Gigabit Ethernet controller ID_BUS=pci ID_VENDOR_ID=0x10ec ID_MODEL_ID=0x8168 ID_MM_CANDIDATE=1 dmesg information: [ 2.855982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.856366] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000064c000, f4:6d:04:d1:2c:4e, XID 0c900800 IRQ 46 [ 12.540956] r8169 0000:04:00.0: eth0: link down [ 12.540961] r8169 0000:04:00.0: eth0: link down [ 12.541173] ADDRCONF(NETDEV_UP): eth0: link is not ready I took out a lot of information that did not pertain to eth0, because the previous edits wouldn't save. If I need any more information, let me know. I would love to get this resolved. The other issue I am noticing is sometimes my connection disconnects all together, for about a minute, then it reconnects.

  Read the article

• Graphical driver 13.10 ATI RV630

  - by Michael Cephalus

  I started updating the distro from 13.04 to 13.10. Then I got my hands on a Radeon HD 2600. I installed the RV630 compatible Catalystdriver from the official webpage. Then xserver crashed everytime I opened a browser or vlc fx. I took notice that there was no driver listed in configuration underneath. michael@statubtunu:~$ lshw -c video WARNING: you should run this program as super-user. *-display UNCLAIMED description: VGA compatible controller product: RV630 PRO [Radeon HD 2600 PRO] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list configuration: latency=0 resources: memory:d0000000-dfffffff memory:e0500000-e050ffff ioport:1000(size=256) memory:e0000000-e001ffff i installed additional drivers from jockey and the ubuntu softwarecenter ati-driver. though that only made it to crash xserver completely and when i type: michael@statubtunu:~$ sudo startx X.Org X Server 1.14.3 Release Date: 2013-09-12 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu Current Operating System: Linux statubtunu 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 17:26:33 UTC 2013 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=8fb2e395-0ea2-4f45-ac66-225696b7ce2c ro quiet splash vt.handoff=7 Build Date: 15 October 2013 09:23:29AM xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.30.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 12 18:50:02 2013 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Initializing built-in extension Generic Event Extension Initializing built-in extension SHAPE Initializing built-in extension MIT-SHM Initializing built-in extension XInputExtension Initializing built-in extension XTEST Initializing built-in extension BIG-REQUESTS Initializing built-in extension SYNC Initializing built-in extension XKEYBOARD Initializing built-in extension XC-MISC Initializing built-in extension SECURITY Initializing built-in extension XINERAMA Initializing built-in extension XFIXES Initializing built-in extension RENDER Initializing built-in extension RANDR Initializing built-in extension COMPOSITE Initializing built-in extension DAMAGE Initializing built-in extension MIT-SCREEN-SAVER Initializing built-in extension DOUBLE-BUFFER Initializing built-in extension RECORD Initializing built-in extension DPMS Initializing built-in extension X-Resource Initializing built-in extension XVideo Initializing built-in extension XVideo-MotionCompensation Initializing built-in extension SELinux Initializing built-in extension XFree86-VidModeExtension Initializing built-in extension XFree86-DGA Initializing built-in extension XFree86-DRI Initializing built-in extension DRI2 Loading extension GLX ERROR: could not insert 'fglrx': No such device (II) [KMS] drm report modesetting isn't supported. (EE) (EE) Backtrace: (EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0xb77780b9] (EE) 1: /usr/bin/X (0xb75d8000+0x1a3e24) [0xb777be24] (EE) 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb75b540c] (EE) 3: /usr/bin/X (xf86findOption+0x2a) [0xb7681daa] (EE) 4: /usr/bin/X (xf86findOptionValue+0x23) [0xb7681f43] (EE) 5: /usr/bin/X (0xb75d8000+0x7ebfd) [0xb7656bfd] (EE) 6: /usr/bin/X (xf86ProcessOptions+0x37) [0xb7657507] (EE) 7: /usr/lib/xorg/modules/libvbe.so (vbeDoEDID+0xe7) [0xb5eb8647] (EE) 8: /usr/lib/xorg/modules/drivers/vesa_drv.so (0xb5ee7000+0x287c) [0xb5ee987c] (EE) 9: /usr/bin/X (InitOutput+0xb23) [0xb7659c33] (EE) 10: /usr/bin/X (0xb75d8000+0x2a30b) [0xb760230b] (EE) 11: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0xb71ba905] (EE) 12: /usr/bin/X (0xb75d8000+0x2a908) [0xb7602908] (EE) (EE) Segmentation fault at address 0x5 (EE) Fatal server error: (EE) Caught signal 11 (Segmentation fault). Server aborting (EE) (EE) Please consult the The X.Org Foundation support at for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. This is what comes, but no GUI. Is there any way to deal with this?

  Read the article

• JFall 2012

  - by Geertjan

  JFall 2012 was over far too soon! Seven tracks going on simultaneously in a great location, with many artifacts reminding me of JavaOne, and nice snacks and drinks afterwards. The day started, as such things always do, with a keynote. Thanks to @royvanrijn for the photo below, I didn't take any myself and without a picture this report might have been too dry: What you see above is Steve Chin riding into the keynote hall on his NightHacking bike. The keynote was interesting, I can't be too complimentary about it, since I was part of it myself. Bert Ertman introduced the day and then Steve Chin took over, together with Sharat Chander, Tom Eugelink, Timon Veenstra, and myself. We had a strict choreography for the keynote, one that would ensure a lot of variation and some unexpected surprises, such as Steve being thrown off the stage a few times by Bert because of mentioning JavaOne too many times, rather than the clearly much cooler JFall. Steve talked about JavaOne and the direction Java is headed in, Sharat talked about JavaME and embedded devices, Steve and Tom did a demo involving JavaFX, I did a Project Easel demo, and Timon from Ordina talked about his Duke's Choice Award winning AgroSense project. I think the Project Easel demo (which I repeated later in a screencast for Parleys arranged by Eugene Boogaart) came across well and several people I spoke to especially like the roundtrip/bi-directional work that can be done, from browser to IDE and back again, very simply and intuitively. (In a long conversation on the drive back home afterwards, the scenario of a designer laying out the UI in HTML and then handing the HTML to a developer for back-end work, a developer who would then find it convenient to open the HTML in a browser and quickly navigate from the browser to the resources within the IDE, was discussed and considered to be extremely interesting and worth considering adopting NetBeans for, for no other reason than that.) Later I attended a session by David Delabassee on Java EE 7, Hans Dockter on Gradle, and Sander Mak on cross-build injection attacks. I was sorry to have missed Martijn Verburg's session, which sounded like it was really fantastic, among others, such as Gerrit Grunwald. I did a session too, entitled "Unlocking the Java EE 6 Platform", which was very well attended, pretty much a full room, and the demo went very smoothly. I talked to many people, e.g., a long time with Hans Dockter about how cool Gradle is and how great the Gradle/NetBeans plugin is turning out to be. I also had a long conversation (and did a demo) with Chris Chedgey, from Structure101, after his session, which was incredibly well attended; very interesting how popular modularity is. I met several people for the first time, as well as some colleagues from past places I've worked at. All in all, it was a great conference, unfortunately too short, which was very well attended (clearly over 1000) people, with several international speakers, as well as international attendees such as Mattias Karlsson, Sweden JUG leader. And, unsurprisingly, I came across NetBeans Platform applications again, none of which I had ever heard of before. In each case, "our fat client application" was mentioned in passing, never as a main application, and never in a context where there are plans for the application to be migrated to the web or mobile, simply because doing so makes no business sense at all. Great times at JFall, looking forward to meeting with some of the people I met again soon.

  Read the article

• The Evolution of Oracle Direct EMEA by John McGann

  - by user769227

  John is expanding his Dublin based team and is currently recruiting a Director with marketing and sales leadership experience: http://bit.ly/O8PyDF Should you wish to apply, please send your CV to [email protected] Hi, my name is John McGann and I am part of the Oracle Direct management team, based in Dublin.   Today I’m writing from the Oracle London City office, right in the heart of the financial district and up to very recently at the centre of a fantastic Olympic Games. The Olympics saw individuals and teams from across the globe competing to decide who is Citius, Altius, Fortius - “Faster, Higher, Stronger" There are lots of obvious parallels between the competitive world of the Olympics and the Business environments that many of us operate in, but there are also some interesting differences – especially in my area of responsibility within Oracle. We are of course constantly striving to be the best - the best solution on offer for our clients, bringing simplicity to their management, consumption and application of information technology, and the best provider when compared with our many niche competitors.   In Oracle and especially in Oracle Direct, a key aspect of how we achieve this is what sets us apart from the Olympians.  We have long ago eliminated geographic boundaries as a limitation to what we can achieve. We assemble the strongest individuals across multiple countries and bring them together in teams focussed on a single goal. One such team is the Oracle Direct Sales Programs team. In case you don’t know, Oracle Direct EMEA (Europe Middle East and Africa) is the inside sales division in Oracle and it is where I started my Oracle career.  I remember that my first role involved putting direct mail in envelopes.... things have moved on a bit since then – for me, for Oracle Direct and in how we interact with our customers. Today, the team of over 1000 people is located in the different Oracle Direct offices around Europe – the main ones are Malaga, Berlin, Prague and Dubai plus the headquarters in Dublin. We work in over 20 languages and are in constant contact with current and future Oracle customers, using the latest internet and telephone technologies to effectively communicate and collaborate with each other, our customers and prospects. One of my areas of responsibility within Oracle Direct is the Sales Programs team. This team of 25 people manages the planning and execution of demand generation, leading the process of finding new and incremental revenue within Oracle Direct. The Sales Programs Managers or ‘SPMs’ are embedded within each of the Oracle Direct sales teams, focussed on distinct geographies or product groups. The SPMs are virtual members of the regional sales management teams, and work closely with the sales and marketing teams to define and deliver demand generation activities. The customer contact elements of these activities are executed via the Oracle Direct Sales and Business Development/Lead Generation teams, to deliver the pipeline required to meet our revenue goals. Activities can range from pan-EMEA joint sales and marketing campaigns, to very localised niche campaigns. The campaigns might focus on particular segments of our existing customers, introducing elements of our evolving solution portfolio which customers may not be familiar with. The Sales Programs team also manages ‘Nurture’ activities to ensure that we develop potential business opportunities with contacts and organisations that do not have immediate requirements. Looking ahead, it is really important that we continue to evolve our ability to add value to our clients and reduce the physical limitations of our distance from them through the innovative application of technology. This enables us to enhance the customer buying experience and to enable the Inside Sales teams to manage ever more complex sales cycles from start to finish.  One of my expectations of my team is to actively drive innovation in how we leverage data to better understand our customers, and exploit emerging technologies to better communicate with them.   With the rate of innovation and acquisition within Oracle, we need to ensure that existing and potential customers are aware of all we have to offer that relates to their business goals.   We need to achieve this via a coherent communication and sales strategy to effectively target the right people using the most effective medium. This is another area where the Sales Programs team plays a key role.

  Read the article

• Schizophrenic Ubuntu 12.10-12.04: Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to getit to work?

  - by zewone

  I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686  Any help much appreciated... Thanks, Philippe

  Read the article

• More Free Apps Bound for the Marketplace

  - by Scott Kuhl

  Microsoft has announced they are raising the limit of free applications a developer can submit from 5 to 100.  But what does that really mean? First, lets look at the reason for the limitation.  The iTunes Store and the Android Market both have a lot more applications available than the Windows Phone Marketplace.  But that says nothing about the quality of those applications.  I attended a couple of pre-launch events and Microsoft representatives were clearly told to send a message. We don’t want a bunch of junky applications that do nothing but spam the marketplace.  That was the reason for the 5 free application limit. Okay, so now what has the result been?  Well, there are still fart apps, but there is no sign of a developer flooding the marking with 1500 wallpaper applications or 1000 of the same application all pointed at different RSS feeds.   On the other hand there are developers who want to release real free apps but are constrained by the 5 app limit. So why did Microsoft change it’s mind?  Is it to get the count of applications up, or is to make developers happy?  Windows Phone Marketplace is growing fast but it’s a long way behind the other guys.   I don’t think Microsoft wants to have 100,000 apps show up in the next 3 months if they are loaded with copy cat apps.  Those numbers will get picked apart quickly and the press will start complaining about  the same problems the Android Market has.  I do think the bump was at developer request.  Microsoft is usually good about listening to developer feedback, but has been pretty slow about it at times.  And from a financial perspective, there will me more apps that Microsoft has to review that they will see no profit on.  At least not until they bake in a advertising model connected to Bing. Ultimately, what does this mean for the future? Well, there are developers out there looking to release more than 5 simple free apps, so I think we will see more hobby apps.  And there are developers out there trying to make money from advertising instead of sales, so I think we will see more of those also.  But the category that I think will grow the fastest is free versions of paid applications that are the same as the trial version of the application.  While technically that makes no sense, its purely a marketing move.  Free apps get downloaded a lot more than paid apps, even with a trial mode.  It always surprises me how little consumers are willing to spend on mobile apps.  How many reviews of applications have you seen that says something like “a bit pricey at $1.99”.  Really?  Have you looked at how much you spend on your phone and plan?  I always thought the trial mode baked into Windows Marketplace was a good idea.  So I’m not sure how the more open free market will play out. In the long run though, I won’t be surprised to see a Bing ad mobile ad model show up so Microsoft can capitalize on the more open and free Windows Marketplace. Bonus: The Oatmeal on How I Feel About Buying Apps

  Read the article

• Detect Unicode Usage in SQL Column

  One optimization you can make to a SQL table that is overly large is to change from nvarchar (or nchar) to varchar (or char).  Doing so will cut the size used by the data in half, from 2 bytes per character (+ 2 bytes of overhead for varchar) to only 1 byte per character.  However, you will lose the ability to store Unicode characters, such as those used by many non-English alphabets.  If the tables are storing user-input, and your application is or might one day be used internationally, its likely that using Unicode for your characters is a good thing.  However, if instead the data is being generated by your application itself or your development team (such as lookup data), and you can be certain that Unicode character sets are not required, then switching such columns to varchar/char can be an easy improvement to make. Avoid Premature Optimization If you are working with a lookup table that has a small number of rows, and is only ever referenced in the application by its numeric ID column, then you wont see any benefit to using varchar vs. nvarchar.  More generally, for small tables, you wont see any significant benefit.  Thus, if you have a general policy in place to use nvarchar/nchar because it offers more flexibility, do not take this post as a recommendation to go against this policy anywhere you can.  You really only want to act on measurable evidence that suggests that using Unicode is resulting in a problem, and that you wont lose anything by switching to varchar/char. Obviously the main reason to make this change is to reduce the amount of space required by each row.  This in turn affects how many rows SQL Server can page through at a time, and can also impact index size and how much disk I/O is required to respond to queries, etc.  If for example you have a table with 100 million records in it and this table has a column of type nchar(5), this column will use 5 * 2 = 10 bytes per row, and with 100M rows that works out to 10 bytes * 100 million = 1000 MBytes or 1GB.  If it turns out that this column only ever stores ASCII characters, then changing it to char(5) would reduce this to 5*1 = 5 bytes per row, and only 500MB.  Of course, if it turns out that it only ever stores the values true and false then you could go further and replace it with a bit data type which uses only 1 byte per row (100MB  total). Detecting Whether Unicode Is In Use So by now you think that you have a problem and that it might be alleviated by switching some columns from nvarchar/nchar to varchar/char but youre not sure whether youre currently using Unicode in these columns.  By definition, you should only be thinking about this for a column that has a lot of rows in it, since the benefits just arent there for a small table, so you cant just eyeball it and look for any non-ASCII characters.  Instead, you need a query.  Its actually very simple: SELECT DISTINCT(CategoryName)FROM CategoriesWHERE CategoryName <> CONVERT(varchar, CategoryName) Summary Gregg Stark for the tip. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Ubuntu keyboard shortcuts - two-part question

  - by Don

  Background: I come from a Windows background and just started dual-booting Ubuntu (my first Linux experience) about 4 days ago. So my systems are Windows 7/Ubuntu 12.04, and so far I'm loving Ubuntu. I am a dedicated mouse-abolitionist (trackpads are hell) and do most of my browsing and navigation with keyboard shortcuts. However, on switching to Ubuntu, a lot of my keyboard shortcuts are gone, and my productivity has resultantly taken a huge hit anytime I am using Ubuntu. Problem 1: My computer was designed to display on-screen notifications for a second when I hit caps-lock or num-lock, and there are no constant indicators of the lock status (LEDs, etc). In Ubuntu, the keys still worked, but the notifications were gone. Googling got me a tutorial on key-binding(Compiz) and scripts, so now I have capslock and numlock running this script: #!/bin/bash icon="/usr/share/icons/gnome/scalable/devices/keyboard.svg" case $1 in 'scrl') mask=3 key="Scroll" ;; 'num') mask=2 key="Num" ;; 'caps') mask=1 key="Caps" ;; esac value=$(xset q | grep "LED mask" | sed -r "s/.*LED mask:\s+[0-9a-fA-F]+([0-9a-fA-F]).*/\1/") if [ $(( 0x$value & 0x$mask )) == $mask ] then output="$key Lock" output2="On" else output="$key Lock" output2="Off" fi notify-send -i $icon "$output" "$output2" -t 1000 But, whether turning it off or on, the notifications always say that I have turned it on. Is there an easy fix for this, or an easier way to work it to get it do display the CORRECT notifications? Problem 2: I'm not sure if this is because of my keyboard or Ubuntu. In Windows, I use Chrome and use the ctrl+pgUp/pgDwn shortcuts quite a bit to switch between tabs. On my keyboard, I can enter pgUp and pgDwn by either disabling NumLock and hitting 9 or 3 respectively on the 10key. Alternately I can hold the fn key and hit up or down arrow. The first method is the one I very heavily relied upon, and it works in Firefox for Ubuntu, but not in Chrome nor in Chromium. The second method (ctrl + fn + up/down) works fine in Chrome. However, I'd dearly like to find a method to make the first method work. Any suggestions? Thanks in advance for your help. Update: @julien: I've checked the keyboard layout options - I didn't find anything that seemed useful for this goal. @Marty: The script runs once when the button is pressed. In Compiz, I've tied those two keys to the script, so when I press the button, it runs the script with the button pressed as a parameter. Update: @elmicha: Thanks. That one works a lot better, and it even pops an icon into the status bar when caps lock is on. There's still a very slight problem in that if I quickly tap the key twice, the image will show that it has been turned on and then turned off, and the notifaction will come and go from my status area, but the text of both notifications will be "Caps Lock on". Same with Num Lock. However, if the time between presses is long enough for the first notification to disappear, everything displays correctly. Given how quickly the notifications disappear, I don't expect this will pose too much of a problem for me.

  Read the article

• How to Draw Lines on the Screen

  - by Geertjan

  I've seen occasional questions on mailing lists about how to use the NetBeans Visual Library to draw lines, e.g., to make graphs or diagrams of various kinds by drawing on the screen. So, rather than drag/drop causing widgets to be added, you'd want widgets to be added on mouse clicks, and you'd want to be able to connect those widgets together somehow. Via the code below, you'll be able to click on the screen, which causes a dot to appear. When you have multiple dots, you can hold down the Ctrl key and connect them together. A guiding line appears to help you position the dots exactly in line with each other. When you go to File | Print, you'll be able to preview and print the diagram you've created. A picture that speaks 1000 words: Here's the code: public final class PlotterTopComponent extends TopComponent { private final Scene scene; private final LayerWidget baseLayer; private final LayerWidget connectionLayer; private final LayerWidget interactionLayer; public PlotterTopComponent() { initComponents(); setName(Bundle.CTL_PlotterTopComponent()); setToolTipText(Bundle.HINT_PlotterTopComponent()); setLayout(new BorderLayout()); this.scene = new Scene(); this.baseLayer = new LayerWidget(scene); this.interactionLayer = new LayerWidget(scene); this.connectionLayer = new LayerWidget(scene); scene.getActions().addAction(new SceneCreateAction()); scene.addChild(baseLayer); scene.addChild(interactionLayer); scene.addChild(connectionLayer); add(scene.createView(), BorderLayout.CENTER); putClientProperty("print.printable", true); } private class SceneCreateAction extends WidgetAction.Adapter { @Override public WidgetAction.State mousePressed(Widget widget, WidgetAction.WidgetMouseEvent event) { if (event.getClickCount() == 1) { if (event.getButton() == MouseEvent.BUTTON1 || event.getButton() == MouseEvent.BUTTON2) { baseLayer.addChild(new BlackDotWidget(scene, widget, event)); repaint(); return WidgetAction.State.CONSUMED; } } return WidgetAction.State.REJECTED; } } private class BlackDotWidget extends ImageWidget { public BlackDotWidget(Scene scene, Widget widget, WidgetAction.WidgetMouseEvent event) { super(scene); setImage(ImageUtilities.loadImage("org/netbeans/plotter/blackdot.gif")); setPreferredLocation(widget.convertLocalToScene(event.getPoint())); getActions().addAction( ActionFactory.createExtendedConnectAction( connectionLayer, new BlackDotConnectProvider())); getActions().addAction( ActionFactory.createAlignWithMoveAction( baseLayer, interactionLayer, ActionFactory.createDefaultAlignWithMoveDecorator())); } } private class BlackDotConnectProvider implements ConnectProvider { @Override public boolean isSourceWidget(Widget source) { return source instanceof BlackDotWidget && source != null ? true : false; } @Override public ConnectorState isTargetWidget(Widget src, Widget trg) { return src != trg && trg instanceof BlackDotWidget ? ConnectorState.ACCEPT : ConnectorState.REJECT; } @Override public boolean hasCustomTargetWidgetResolver(Scene arg0) { return false; } @Override public Widget resolveTargetWidget(Scene arg0, Point arg1) { return null; } @Override public void createConnection(Widget source, Widget target) { ConnectionWidget conn = new ConnectionWidget(scene); conn.setTargetAnchor(AnchorFactory.createCircularAnchor(target, 10)); conn.setSourceAnchor(AnchorFactory.createCircularAnchor(source, 10)); connectionLayer.addChild(conn); } } ... ... ... Note: The code above was written based on the Visual Library tutorials on the NetBeans Platform Learning Trail, in particular via the "ConnectScene" sample in the "test.connect" package, which is part of the very long list of Visual Library samples referred to in the Visual Library tutorials on the NetBeans Platform Learning Trail. The next steps are to add a reconnect action and an action to delete a dot by double-clicking on it. Would be interesting to change the connecting line so that the length of the line were to be shown, i.e., as you draw a line from one dot to another, you'd see a constantly changing number representing the current distance of the connecting line. Also, once lines are connected to form a rectangle, would be cool to be able to write something within that rectangle. Then one could really create diagrams, which would be pretty cool.

  Read the article

• Asynchrony in C# 5 (Part I)

  - by javarg

  I’ve been playing around with the new Async CTP preview available for download from Microsoft. It’s amazing how language trends are influencing the evolution of Microsoft’s developing platform. Much effort is being done at language level today than previous versions of .NET. In these post series I’ll review some major features contained in this release: Asynchronous functions TPL Dataflow Task based asynchronous Pattern Part I: Asynchronous Functions This is a mean of expressing asynchronous operations. This kind of functions must return void or Task/Task<> (functions returning void let us implement Fire & Forget asynchronous operations). The two new keywords introduced are async and await. async: marks a function as asynchronous, indicating that some part of its execution may take place some time later (after the method call has returned). Thus, all async functions must include some kind of asynchronous operations. This keyword on its own does not make a function asynchronous thought, its nature depends on its implementation. await: allows us to define operations inside a function that will be awaited for continuation (more on this later). Async function sample: Async/Await Sample async void ShowDateTimeAsync() {     while (true)     {         var client = new ServiceReference1.Service1Client();         var dt = await client.GetDateTimeTaskAsync();         Console.WriteLine("Current DateTime is: {0}", dt);         await TaskEx.Delay(1000);     } } The previous sample is a typical usage scenario for these new features. Suppose we query some external Web Service to get data (in this case the current DateTime) and we do so at regular intervals in order to refresh user’s UI. Note the async and await functions working together. The ShowDateTimeAsync method indicate its asynchronous nature to the caller using the keyword async (that it may complete after returning control to its caller). The await keyword indicates the flow control of the method will continue executing asynchronously after client.GetDateTimeTaskAsync returns. The latter is the most important thing to understand about the behavior of this method and how this actually works. The flow control of the method will be reconstructed after any asynchronous operation completes (specified with the keyword await). This reconstruction of flow control is the real magic behind the scene and it is done by C#/VB compilers. Note how we didn’t use any of the regular existing async patterns and we’ve defined the method very much like a synchronous one. Now, compare the following code snippet  in contrast to the previuous async/await: Traditional UI Async void ComplicatedShowDateTime() {     var client = new ServiceReference1.Service1Client();     client.GetDateTimeCompleted += (s, e) =>     {         Console.WriteLine("Current DateTime is: {0}", e.Result);         client.GetDateTimeAsync();     };     client.GetDateTimeAsync(); } The previous implementation is somehow similar to the first shown, but more complicated. Note how the while loop is implemented as a chained callback to the same method (client.GetDateTimeAsync) inside the event handler (please, do not do this in your own application, this is just an example).  How it works? Using an state workflow (or jump table actually), the compiler expands our code and create the necessary steps to execute it, resuming pending operations after any asynchronous one. The intention of the new Async/Await pattern is to let us think and code as we normally do when designing and algorithm. It also allows us to preserve the logical flow control of the program (without using any tricky coding patterns to accomplish this). The compiler will then create the necessary workflow to execute operations as the happen in time.

  Read the article

• Wireless doesn't work on a Broadcom BCM4312

  - by Boderick

  As stated, I've just upgraded to 12.04 and my Dell Inspiron 1545 isn't recognising its wireless card and I was wondering if anybody could help? Edit: Okay, so I found the wireless card by using lspci -vvv and it returned this: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- Kernel modules: ssb lsmod Module Size Used by dm_crypt 22528 0 joydev 17393 0 dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi dell_laptop 13671 0 dcdbas 14098 1 dell_laptop psmouse 72919 0 uvcvideo 67203 0 serio_raw 13027 0 videodev 86588 1 uvcvideo snd_hda_codec_idt 60251 1 mac_hid 13077 0 snd_hda_intel 32765 5 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec parport_pc 32114 0 rfcomm 38139 0 bnep 17830 2 ppdev 12849 0 snd_pcm 80845 3 snd_hda_intel,snd_hda_codec bluetooth 158438 10 rfcomm,bnep snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq binfmt_misc 17292 1 snd 62064 18 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp sky2 53628 0 ums_realtek 17920 0 uas 17699 0 i915 414603 3 wmi 18744 1 dell_wmi drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 usb_storage 39646 1 ums_realtek ifconfig -a eth0 Link encap:Ethernet HWaddr 00:23:ae:24:71:45 inet addr:192.168.1.158 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:aeff:fe24:7145/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14340 errors:0 dropped:0 overruns:0 frame:0 TX packets:10191 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15403754 (15.4 MB) TX bytes:1262570 (1.2 MB) Interrupt:18 ham0 Link encap:Ethernet HWaddr 7a:79:05:2d:b0:f7 inet addr:5.45.176.247 Bcast:5.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:5ff:fe2d:b0f7/64 Scope:Link inet6 addr: 2620:9b::52d:b0f7/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:27480 (27.4 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:433 errors:0 dropped:0 overruns:0 frame:0 TX packets:433 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:60051 (60.0 KB) TX bytes:60051 (60.0 KB) iwconfig lo no wireless extensions. ham0 no wireless extensions. eth0 no wireless extensions. the results for sudo lshw -class network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0c:00.0 logical name: eth1 version: 01 serial: 00:22:5f:77:1f:e6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f69fc000-f69fffff *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 13 serial: 00:23:ae:24:71:45 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.158 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:f68fc000-f68fffff ioport:de00(size=256) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:05:2d:b0:f7 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.45.176.247 link=yes multicast=yes port=twisted pair speed=10Mbit/s and the results of rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• Teminal non-responsive on load, can't enter anything until CTRL+C

  - by Silver Light

  Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

  Read the article

• Access denied error while mounting a shared folder?

  - by SSH

  I am a linux newbie and I have a very basic question. I have three machines - machineA 10.108.24.132 machineB 10.108.24.133 machineC 10.108.24.134 and all those machines have Ubuntu 12.04 installed in it and I have root access to all those three machines. Now I am supposed to do below things in my above machines - Create mount point /opt/exhibitor/conf Mount the directory in all servers. sudo mount <NFS-SERVER>:/opt/exhibitor/conf /opt/exhibitor/conf/ I have already created /opt/exhibitor/conf directory in all those three machines as mentioned above. Now I am trying to create a Mount Point on all those three machines. So I followed the below process - Install NFS support files and NFS kernel server in all the above three machines $ sudo apt-get install nfs-common nfs-kernel-server Create the shared directory in all the above three machines $ mkdir /opt/exhibitor/conf/ Edited the /etc/exports and added the entry like this in all the above three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.*(rw) Run exportfs in all the above three machines root@machineA:/# exportfs -rv exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "10.108.24.*:/opt/exhibitor/conf/". Assuming default behaviour ('no_subtree_check'). NOTE: this default has changed since nfs-utils version 1.0.x exporting 10.108.24.*:/opt/exhibitor/conf Now I did showmount on machineA root@machineA:/# showmount -e 10.108.24.132 Export list for 10.108.24.132: /opt/exhibitor/conf 10.108.24.* And also I have started the NFS server like this in all the above three machines - sudo /etc/init.d/nfs-kernel-server start And now when I did this, I am getting an error - root@machineA:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ mount.nfs: access denied by server while mounting 10.108.24.132:/opt/exhibitor/conf I have also tried doing the same thing from machineB and machineC as well and still I get the same error- root@machineB:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ root@machineC:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ Did my /etc/exports file looks good? As I have the same content in all the three machines. And also are there any logs related to NFS which I can see to find any clues? Any idea what wrong I am doing here? UPDATE:- So my etc/exports files would be like this in all the three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.132(rw) /opt/exhibitor/conf/ 10.108.24.133(rw) /opt/exhibitor/conf/ 10.108.24.134(rw) Just a quick check - The IP Address that I am taking for each machine as mentioned above is like this - root@machineB:/# ifconfig eth0 Link encap:Ethernet HWaddr 00:50:56:ad:5b:a7 inet addr:10.108.24.133 Bcast:10.108.27.255 Mask:255.255.252.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5696812 errors:0 dropped:12462 overruns:0 frame:0 TX packets:5083427 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7904369145 (7.9 GB) TX bytes:601844910 (601.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:187144 errors:0 dropped:0 overruns:0 frame:0 TX packets:187144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:24012302 (24.0 MB) TX bytes:24012302 (24.0 MB) Here the IP Address that I am taking for machineB is 10.108.24.133.

  Read the article

• How do I get to work my Atheros AR9485 Wireless card in Ubuntu 14.04 LTS?

  - by Ivan Kreimer

  I've recently installed Ubuntu 14.04 LTS in my ASUS D550CA, and so far things have gone great. The only problem I've got is the Wi-Fi. It doesn't work. I've got an Qualcomm Atheros AR9485. I've tried installing the drivers, but the sytem says it doesn't find any. So I started looking around this forum for solutions. I've read every single post from this forum about my Wi-Fi network adapter, and I've found nothing that solves my problem. Let me give you some info about my configuration. Disclaimer: my configuration is in spanish, so if you don't understand something you can either use Google translate, or use your imagination. :D When I run $ sudo lshw -C network this is what I get: *-network DEACTIVATED descripción: Interfaz inalámbrica producto: AR9485 Wireless Network Adapter fabricante: Qualcomm Atheros id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: wlan0 versión: 01 serie: 28:e3:47:5c:5d:3f anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.13.0-34-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:f7d00000-f7d7ffff memoria:f7d80000-f7d8ffff *-network descripción: Ethernet interface producto: RTL8101E/RTL8102E PCI Express Fast Ethernet controller fabricante: Realtek Semiconductor Co., Ltd. id físico: 0.2 información del bus: pci@0000:03:00.2 nombre lógico: eth0 versión: 06 serie: e0:3f:49:ce:57:49 tamaño: 100Mbit/s capacidad: 100Mbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8402-1_0.0.1 10/26/11 ip=181.165.245.39 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s recursos: irq:41 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff At the beginning, you'll see that it says "*-network DEACTIVATED" (or at least that's what I translated), is that something bad? Then, when I run ipconfig this is what I get: eth0 Link encap:Ethernet direcciónHW e0:3f:49:ce:57:49 Direc. inet:181.165.245.39 Difus.:181.165.245.255 Másc:255.255.255.0 Dirección inet6: fe80::e23f:49ff:fece:5749/64 Alcance:Enlace ACTIVO DIFUSIÓN FUNCIONANDO MULTICAST MTU:1500 Métrica:1 Paquetes RX:221199 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:62025 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:124409589 (124.4 MB) TX bytes:7471899 (7.4 MB) lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:65536 Métrica:1 Paquetes RX:2977 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:2977 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:397158 (397.1 KB) TX bytes:397158 (397.1 KB) When I put iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Finally, when I put sudo rfkill list all, I got: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no I hope anyone can help me solve this, I've searched a lot and found no solution. Thanks a lot.

  Read the article

• Numbers not adding up? (What am I not understanding here?) [closed]

  - by Milo

  I have the following output: Short version: The last numbers on the S= lines increase by H and SHOULD theoretically be linearly decreasing, ex: -285,-290,-295...but the fourth one jumps to -252. Yet, every other number is linearly increasing. Why is that and how could I fix that? To explain the numbers, it comes from slider value changed. I have a slider whose value is used to generate the float on the next line. Everything should be growing linearly here. This value is used to determine the size of a flow layout and it is also used in conjunction with a scrollbar. But basically I have a background for the flow layout and that number is the start location for rendering it. The numbers should linearly change to create a smooth transition but when that one jumps, it looks weird on screen and I dont understand why the numbers are jumping every X slider value changes. Mathematically what could be causing this? Here is the code for rendering the background and the function that is called when value changes: void LobbyTableManager::renderBG( GraphicsContext* g, agui::Rectangle& absRect, agui::Rectangle& childRect ) { float scale = 0.35f; int w = m_bgSprite->getWidth() * getTableScale() * scale; int h = m_bgSprite->getHeight() * getTableScale() * scale; int numX = ceil(absRect.getWidth() / (float)w) + 2; int numY = ceil(absRect.getHeight() / (float)h) + 2; int startY = childRect.getY(); int numAttempts = 0; while(startY + h < absRect.getY() && numAttempts < 1000) { startY += h; if(moo) { std::cout << startY << ","; } numAttempts++; } g->holdDrawing(); for(int i = 0; i < numX; ++i) { for(int j = 0; j < numY; ++j) { g->drawScaledSprite(m_bgSprite,0,0,m_bgSprite->getWidth(),m_bgSprite->getHeight(), absRect.getX() + (i * w) + (offsetX),absRect.getY() + (j * h) + startY,w,h,0); } } g->unholdDrawing(); g->setClippingRect(cx,cy,cw,ch); } void LobbyTableManager::setTableScale( float scale ) { scale += 0.3f; scale *= 2.0f; float scrollRel = m_vScroll->getRelativeValue(); setScale(scale); rescaleTables(); resizeFlow(); updateScrollBars(); float newVal = scrollRel * m_vScroll->getMaxValue(); m_vScroll->setValue(newVal); } void LobbyTableManager::valueChanged( agui::VScrollBar* source,int val ) { m_flow->setLocation(0,-val); } Any insight on mathematically why the anomaly might happen every Nth time would be helpful. I just dont understand why if every number linearly increates it jumps from -295 to -252! Thanks

  Read the article

• Randomely loosing wireless connexion with Cubuntu 12.04

  - by statquant

  I am presently experiencing random disconnections from my wireless network. It looks like it is more and more frequent (however I have not seen any clear pattern). This is killing me... Here is some information that should help (from ubuntu forums). Thanks for reading Machine : Acer Aspire S3 statquant@euclide:~$ lsb_release -d Description: Ubuntu 12.04.1 LTS statquant@euclide:~$ uname -mr 3.2.0-33-generic x86_64 statquant@euclide:~$ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... statquant@euclide:~$ lspci 02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) statquant@euclide:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 004: ID 064e:c321 Suyin Corp. Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. statquant@euclide:~$ ifconfig wlan0 Link encap:Ethernet HWaddr 74:de:2b:dd:c4:78 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::76de:2bff:fedd:c478/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:913 errors:0 dropped:0 overruns:0 frame:0 TX packets:802 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:873218 (873.2 KB) TX bytes:125826 (125.8 KB) statquant@euclide:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"Bbox-D646D1" Mode:Managed Frequency:2.437 GHz Access Point: 00:19:70:80:01:6C Bit Rate=65 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=56/70 Signal level=-54 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:71 Missed beacon:0 statquant@euclide:~$ dmesg | grep "wlan" [ 17.495866] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.498950] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.072015] wlan0: authenticate with 00:19:70:80:01:6c (try 1) [ 20.269853] wlan0: authenticate with 00:19:70:80:01:6c (try 2) [ 20.272386] wlan0: authenticated [ 20.298682] wlan0: associate with 00:19:70:80:01:6c (try 1) [ 20.302321] wlan0: RX AssocResp from 00:19:70:80:01:6c (capab=0x431 status=0 aid=1) [ 20.302325] wlan0: associated [ 20.307307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.402292] wlan0: no IPv6 routers present statquant@euclide:~$ sudo lshw -C network [sudo] password for statquant: *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 74:de:2b:dd:c4:78 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-33-generic firmware=N/A ip=192.168.1.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c0400000-c047ffff memory:afb00000-afb0ffff statquant@euclide:~$ iwlist scan wlan0 Scan completed : Cell 01 - Address: 00:19:70:80:01:6C Channel:6 Frequency:2.437 GHz (Channel 6) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"Bbox-D646D1" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000125fb152bb Extra: Last beacon: 40020ms ago IE: Unknown: 000B42626F782D443634364431 IE: Unknown: 010882848B960C121824 IE: Unknown: 030106 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101820003A4000027A4000042435E0062322F00 IE: Unknown: 2D1A4C101BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D1606080800000000000000000000000000000000000000 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000 And... finally, please note that I did the following (after looking for fixes of similar problems), but unfortunately it did not work sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1

  Read the article

• Multithreading 2D gravity calculations

  - by Postman

  I'm building a space exploration game and I've currently started working on gravity ( In C# with XNA). The gravity still needs tweaking, but before I can do that, I need to address some performance issues with my physics calculations. This is using 100 objects, normally rendering 1000 of them with no physics calculations gets well over 300 FPS (which is my FPS cap), but any more than 10 or so objects brings the game (and the single thread it runs on) to its knees when doing physics calculations. I checked my thread usage and the first thread was killing itself from all the work, so I figured I just needed to do the physics calculation on another thread. However when I try to run the Gravity.cs class's Update method on another thread, even if Gravity's Update method has nothing in it, the game is still down to 2 FPS. Gravity.cs public void Update() { foreach (KeyValuePair<string, Entity> e in entityEngine.Entities) { Vector2 Force = new Vector2(); foreach (KeyValuePair<string, Entity> e2 in entityEngine.Entities) { if (e2.Key != e.Key) { float distance = Vector2.Distance(entityEngine.Entities[e.Key].Position, entityEngine.Entities[e2.Key].Position); if (distance > (entityEngine.Entities[e.Key].Texture.Width / 2 + entityEngine.Entities[e2.Key].Texture.Width / 2)) { double angle = Math.Atan2(entityEngine.Entities[e2.Key].Position.Y - entityEngine.Entities[e.Key].Position.Y, entityEngine.Entities[e2.Key].Position.X - entityEngine.Entities[e.Key].Position.X); float mult = 0.1f * (entityEngine.Entities[e.Key].Mass * entityEngine.Entities[e2.Key].Mass) / distance * distance; Vector2 VecForce = new Vector2((float)Math.Cos(angle), (float)Math.Sin(angle)); VecForce.Normalize(); Force = Vector2.Add(Force, VecForce * mult); } } } entityEngine.Entities[e.Key].Position += Force; } } Yeah, I know. It's a nested foreach loop, but I don't know how else to do the gravity calculation, and this seems to work, it's just so intensive that it needs its own thread. (Even if someone knows a super efficient way to do these calculations, I'd still like to know how I COULD do it on multiple threads instead) EntityEngine.cs (manages an instance of Gravity.cs) public class EntityEngine { public Dictionary<string, Entity> Entities = new Dictionary<string, Entity>(); public Gravity gravity; private Thread T; public EntityEngine() { gravity = new Gravity(this); } public void Update() { foreach (KeyValuePair<string, Entity> e in Entities) { Entities[e.Key].Update(); } T = new Thread(new ThreadStart(gravity.Update)); T.IsBackground = true; T.Start(); } } EntityEngine is created in Game1.cs, and its Update() method is called within Game1.cs. I need my physics calculation in Gravity.cs to run every time the game updates, in a separate thread so that the calculation doesn't slow the game down to horribly low (0-2) FPS. How would I go about making this threading work? (any suggestions for an improved Planetary Gravity system are welcome if anyone has them) I'm also not looking for a lesson in why I shouldn't use threading or the dangers of using it incorrectly, I'm looking for a straight answer on how to do it. I've already spent an hour googling this very question with little results that I understood or were helpful. I don't mean to come off rude, but it always seems hard as a programming noob to get a straight meaningful answer, I usually rather get an answer so complex I'd easily be able to solve my issue if I understood it, or someone saying why I shouldn't do what I want to do and offering no alternatives (that are helpful). Thank you for the help!

  Read the article

• Teminal hands on load, can't enter anything until CTRL+C

  - by Silver Light

  Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

  Read the article

• HLSL 5 interpolation issues

  - by metredigm

  I'm having issues with the depth components of my shadowmapping shaders. The shadow map rendering shader is fine, and works very well. The world rendering shader is more problematic. The only value which seems to definitely be off is the pixel's position from the light's perspective, which I pass in parallel to the position. struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; The reason that I used the semantic 'TEXCOORD2' on the light's pixel position is because I believe that the problem lies with Direct3D's interpolation of values between shaders, and I started trying random semantics and also forcing linear and noperspective interpolations. In the world rendering shader, I observed in the pixel shader that the Z value of light_pos was always extremely close to, but less than the W value. This resulted in a depth result of 0.999 or similar for every pixel. Here is the vertex shader code : struct Vertex { float3 position : POSITION; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; cbuffer Camera : register (b0) { matrix world; matrix view; matrix projection; }; cbuffer Light : register (b1) { matrix light_world; matrix light_view; matrix light_projection; }; Pixel RenderVertexShader(Vertex input) { Pixel output; output.position = mul(float4(input.position, 1.0f), world); output.position = mul(output.position, view); output.position = mul(output.position, projection); output.world_pos = mul(float4(input.position, 1.0f), world); output.world_pos = mul(output.world_pos, light_view); output.world_pos = mul(output.world_pos, light_projection); output.texcoord = input.texcoord; output.normal = input.normal; return output; } I suspect interpolation to be the culprit, as I used the camera matrices in place of the light matrices in the vertex shader, and had the same problem. The problem is evident as both of the same vectors were passed to a pixel from the VS, but only one of them showed a change in the PS. I have already thoroughly debugged the matrices' validity, the cbuffers' validity, and the multiplicative validity. I'm very stumped and have been trying to solve this for quite some time. Misc info : The light projection matrix and the camera projection matrix are the same, generated from D3DXMatrixPerspectiveFovLH(), with an FOV of 60.0f * 3.141f / 180.0f, a near clipping plane of 0.1f, and a far clipping plane of 1000.0f. Any ideas on what is happening? (This is a repost from my question on Stack Overflow)

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >