Search Results

Search found 24708 results on 989 pages for 'internet filter'.

Page 124/989 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• OpenVPN not sending traffic to internet?

  - by coleifer

  I've set up openvpn on my pi and am running into a small issue. I can connect to the VPN server and ping it just fine, and I can also connect to other machines on my local network. However I am unable, when connected to the VPN, to reach the outside world (either by name lookup or IP). here are the details: On the server the tun0 interface: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.1 netmask 255.255.255.255 destination 10.8.0.2 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I can ping it just fine: # ping -c 3 10.8.0.1 PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data. 64 bytes from 10.8.0.1: icmp_seq=1 ttl=64 time=0.159 ms 64 bytes from 10.8.0.1: icmp_seq=2 ttl=64 time=0.155 ms 64 bytes from 10.8.0.1: icmp_seq=3 ttl=64 time=0.156 ms --- 10.8.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms Routing table # ip route show default via 192.168.1.1 dev eth0 metric 204 10.8.0.0/24 via 10.8.0.2 dev tun0 10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 204 I also have ip traffic forwarding: net.ipv4.ip_forward = 1 I do not have any custom iptables rules (that I'm aware of). On the client, I can connect to the VPN. Here is my tun0: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.6 netmask 255.255.255.255 destination 10.8.0.5 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 21 bytes 1527 (1.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 And on the client I can ping it: sudo ping -c 3 10.8.0.6 PING 10.8.0.6 (10.8.0.6) 56(84) bytes of data. 64 bytes from 10.8.0.6: icmp_seq=1 ttl=64 time=0.035 ms 64 bytes from 10.8.0.6: icmp_seq=2 ttl=64 time=0.026 ms 64 bytes from 10.8.0.6: icmp_seq=3 ttl=64 time=0.032 ms --- 10.8.0.6 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.026/0.031/0.035/0.003 ms I can ssh from the client into another server on my LAN (192.168.1.x), however I cannot reach anything outside my LAN. Here's some of the server logs at the bottom of this gist: https://gist.github.com/coleifer/6ef95c3008f130249933/edit I am frankly out of ideas! I don't think it's my client because both my laptop and my phone (which has an openvpn client) exhibit the same behavior. I had OpenVPN installed on this pi before using debian and it worked, so I don't think it's my router but of course anything is possible.

  Read the article

• Using Linode as a proxy server wrapped in DNS to bypass paid internet services

  - by snihalani

  I have a linode server that I use for development. I was thinking of using that as a proxy server. I have noticed that most paid connections allow DNS queries but don't allow http until I pay them. I verified this by flushing my dns cache and nslookup some random websites. How do I create a proxy server that allows me to may be wrap my packets from my computer in DNS packets, relay to my linode server with ssh key authentication and act as a broker? Thanks.

  Read the article

• Internet Explorer 6 Encountered An Error ntl.dll Issue on XP and Win2000

  - by Gary B2312321321

  As we have some PC's still running Windows 2000 and this is beyond our control we use IE 6 so we can keep the IE platform standard. Recently on some XP and Win2000 PCs IE has been crashing with the Encountered a Problem and Needs to close do you want to send a message to Microsoft error when entering some sites. This happens even after a format reinstall with minimal software load (Office 2000, some avaya software, kaspersky, tapiex.dll). The module pointed to in the error report is ntl.dll. There are lots of reports over the net of the problem but has anyone resolved this issue? (Latest IE6 updates are installed). Also please note there were no 3rd party IE addons, spyware, viruses or adware Hope someone can help.

  Read the article

• Getting Windows (VMware) to load from OSX's localhost without an Internet Connection

  - by Jonah Goldstein

  I'm using MAMP to host my local sites, and VirtualHostX so that I can access sites during local development via a convenient URL like mysite.dev I'm also running Windows XP via VirtualBox, and it would be great to be able to load up any of my local sites within windows while offline as currently often working without access, on the move, unfortunately. I know that I can append my IP and a nice domain name to the host file in C:/WINDOWS/system32/drivers/etc ... and i can find my IP simply through terminal with "ifconfig" while I'm online. The problem is that when I'm not online, there's no IP. Even if there is an IP (when i have a connection), I still have grab it and update the windows hosts' file all the time, since I'm developing from a laptop and have a new IP at the drop of a dime. I found a tutorial where the author is able to get a permanent IP. He uses VMware Fusion as his VMachine, which is the only difference between his setup and mine. By running the terminal command "ifconfig vmnet1" he gets: a secret IP the virtual machine uses to talk to OSX And that doesn't change - which is awesome. I'm assuming it exists even if he's offline. His tutorial is here, http://bit.ly/U2lq It would be pretty fantabulous if I could replicate this with virtualBox. Anyone have ideas? Thanks:)

  Read the article

• VMWare guest OS internet access issues

  - by Qua Phan

  My host is running Win 7 ultimate 64bit, ESET NOD32 AV 4.0 (64 bit). My guest OS is Windows XP Professional (Sp3) Using bridge mode, I can ping gateway just fine, even ping public dns server (8.8.8.8 or 208.67.222.222). But cannot resolve any dns request. I tried using nslookup with public dns, my gateway but no good. I can access my host share file normally thou. Any suggestions?

  Read the article

• internet service providers

  - by gautam kumar

  I am unclear about the differences between international, national, regional and local ISPs. Please explain the differences and their importance, with examples. I am new to this site, so please forgive me if my question is not up to your expectations.

  Read the article

• How does TTL affect my internet connection?

  - by Luiscencio

  Each day I run pings to test latencies, but TTL is different every day, sometimes higher, sometimes lower. How does this affect my connection? Reply from 209.131.36.159: bytes=32 time=106ms TTL=52 Reply from 209.131.36.159: bytes=32 time=93ms TTL=52 Reply from 209.131.36.159: bytes=32 time=63ms TTL=52 Reply from 209.131.36.159: bytes=32 time=73ms TTL=52

  Read the article

• How to access website on localhost from internet?

  - by Nitesh Panchal

  Hello, I turned my pc into router by allowing port forwarding on port 80 and got my hostname(xyz.donexist.org) registered through dyndns.com. Now i when i type my public ip address in browser i get redirected to my browser. I have installed glassfish and have my website deployed in glassfish. I want that when i type xyz.donexist.org my website should be opened. What all steps more i need to take? I have made a entry in etc/hosts file as :- 127.0.0.1 xyz.donexist.org Please guide me. I am and beginner. Thanks in advance :)

  Read the article

• Factors affecting internet response time in online gaming

  - by cornjuliox

  I frequently play games like Urban Terror and True Combat Elite, and I was wondering what factors come into play when calculating response time? Is it simply the distance between you and the server? Or does bandwidth fit in here somehow?

  Read the article

• 403.4 won't redirect in IE7

  - by Jeremy Morgan

  I have a secured folder that requires SSL. I have set it up in IIS(6) to require SSL. We don't want the visitors to be greeted with the "must be secure connection" error, so I have modified the 403.4 error page to contain the following: function redirectToHttps() { var httpURL = window.location.hostname+window.location.pathname; var httpsURL = "https://" + httpURL ; window.location = httpsURL ; } redirectToHttps(); And this solution works great for every browser, but IE7. On any other browser, if you type in http://www.mysite.com/securedfolder it will automatically redirect you to https://www.mysite.com/securedfolder with no message or anything (the intended action). But in Internet Explorer 7 ONLY it will bring up a page that says The website declined to show this webpage Most Likely Causes: This website requires you to log in This is something we don't want of course. I have verified that javascript is enabled, and the security settings have no effect, even when I set them to the lowest level I get the same error. I'm wondering, has anyone else seen this before?

  Read the article

• sharing a folder between linux and windows over the internet

  - by valya

  Hello Currently my job is to make websites with Django. I use many things like virtualenv, PIL, etc. The problem is, I can't stand Linux on my desktop. I like it on servers, It's greate to use it over the SSH. But for desktop? No way. But for the development Linux is quite essential. Of course almost everything is ported to Windows, but it's not as simple to use as in Linux. For example, Windows shell is awful in comparison with Linux. So I've tried Cygwin, but it's too damn slow. Every time django dev server reloads, it tooks almost 20-30 seconds. In comparison, then using "native" python on Windows or Linux, it reloads instantly. Even worse, Cygwin makes all my system very slow. I've been thinking about it and have thought up a way to go. I can share a folder with my application with some Linux box. The devserver and everything will run on that box, while I'll be happy editing files and running the browser on my Windows 7. SSH shell is much quickier and handy than Cygwin. Currently there are no Linux boxes in my home network (except for my android phone :) but I have several VDS boxes with Debian. So, how do I share a Windows folder with VDS box? I can't rely on my desktop IP but I can rely on the VDS's one. I need sharing to be as quick as possible (well, 2-3 seconds ping is OK) and "native" for both systems, so I could use a folder like a normal folder in both Windows and Linux.

  Read the article

• Podcasting: Pipe internet audio to conference calls

  - by Mike Fielden

  I have a podcast and we use Skype and Audio Hijack to record all of us. How would I go about piping audio so the other people on the Skype conference call can hear it real time? I would like a software solution if possible. I realize they are several hardware solutions available.

  Read the article

• Best method of transferring files over internet?

  - by EsotericHabit

  I have a seedbox (running Ubuntu 9.10) at my (parent's) house and will be leaving it there once I go to college this fall. Currently I'm using samba to transfer files between computers, but I was wondering if once I am on my university's network, whether using FTP would be a better option versus samba over a VPN. The files will range from 100 MB to 17 GB, if that matters. Would one be more efficient over the other? Did I forget any other options?

  Read the article

• Mac internet problems

  - by Bradley Herman

  Our office is set up with mostly macs (7 of them) but we do have a windows laptop and a windows desktop on the network as well. The network is configured with a modem going into a switch/router throughout the office to the computers, along with a wireless router. Everything runs fine most of the time, but periodically while using the web, certain sites will stop loading and timeout repeatedly. This usually lasts 20 minutes or so and can be incredibly annoying. Resetting the modem/router and/or rebooting the computer never helps. The weirdest part is that in almost every case, the websites are fine on our Windows machines. I frequently use github, google, Stack Overflow, and jQuery reference and I can count on the sites being unavailable to me at least once a day. While I can't get them to load, I can spin my chair around to the windows server behind me and load the sites just fine. Any idea what the hell could be going on here?

  Read the article

• How private is the Opera Turbo feature of Opera?

  - by Marcus V

  If I'm using Opera with the Opera Turbo feature turned on (always, not set to "automaticly"). Can anyone see what sites I'm visiting (except Opera of course ...)? Opera Turbo uses a proxy server, so it should be that way, but as a not very technical person I'm not sure. Why do I want this? Well: nowadays, at least in my country, more and more (legal) open Wi-Fi connections are available. In those environments I like to have more privacy protections. I don't mind if they can see my IP address, but I just want to hide as much as I can of what I am doing. BTW: I don't care that they can see the data transferred; it doesn't have to be that secret. I only want to hide the requested Internet site links. BTW: I know that Opera Turbo only works with non-secure websites (HTTP), but that's fine for me. I only want it to work with these sites. BTW: I'm not need this for illegal purposes; I only want this for privacy reasons.

  Read the article

• Use telnet with Wireless Internet connection

  - by Mr. Man

  Is it possible to use telnet to connect to remote computers/hosts using only a WiFi connection and no direct connection to the modem except through the router? Thanks in advance!

  Read the article

• Managing a wireless internet connection

  - by cornjuliox

  I've just recently purchased a USB wi-fi adapter and have been using the software (for Windows XP) that comes with it to search for and connect to networks, but it's really quite slow and featureless. Are there free/OSS alternatives for Windows XP that can I can replace it with? Preferably something that can, in addition to connecting/searching for wireless networks, display stats like signal strength and transfer speeds on graphs so I can better monitor the quality of my connection?

  Read the article

• AFP / Apple Filling Protocol aka Netatalk access over Internet

  - by PJJ

  I got a simple cloud server and thought it would be nice to have mac native afp Volumes accesss. Installed Netatalk and this seems to work pretty nice. No sensitive data or something but I don't like to wake up someday and have my www docs rm-rfed by some kid h4x0r. Q1: Is afp encrypted? Q2: How can I make it (semi)secure? Q3: Does VPN makes sense for this? Q4: What would you do to get afp working over net? Opening any service meant for Lan only is a basic flaw, i know - but me be ignorant about it. According to Apple Dev only the authentication is encrypted or am I mssing something?

  Read the article

• Ubuntu 12.04 suddenly cannot connect to WPA2/WPA Personal protected connection. Windows 7 can

  - by d4ryl3

  I have a laptop with Windows 7 and Ubuntu 12.04. I have a Cisco E1200 and when I set it up, it created 2 SSIDs. Let's name them: MyConnection (WPA/WPA2 personal), and MyConnection-Guest (no authentication, guest password entered via web browser). I had no problem connecting to MyConnection before, either in Windows 7 and Ubuntu. But now, I can't access MyConnection on Ubuntu. It just says "connecting..." then disconnects after a while. But I'm able to access the internet (on Ubuntu) when I connect to MyConnection-Guest. MAC filtering is off (even if it's on its MAC address is in the white list). Any idea why I'm unable to connect to MyConnection in Ubuntu? Thanks. Update: My Ubuntu installation can connect to ANY WiFi connection (WPA/WEP/no auth), except for MyConnection. Update2: This is what "The not so easy way" returned: Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' Priority group 0 id=0 ssid='MyConnection' id=1 ssid='MyConnection' id=2 ssid='MyConnection' id=3 ssid='MyConnection' WEXT: cfg80211-based driver detected SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf flags 0x0 netlink: Operstate: linkmode=1, operstate=5 Own MAC address: xx:xx:xx:xx:xx:xx wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=4 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_key: alg=0 key_idx=5 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_countermeasures RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): 16 3b d8 47 9e 24 50 89 96 16 6d 66 35 f3 58 37 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized Added interface eth1

  Read the article

• Cannot clear away BitDefender Internet Security system tray message

  - by unknown (google)

  I have BitDefender IS 2008 installed on my PC. In the last few days I have noticed the taskbar icon grumbling 1 issue requires your attention The Real-Time File Scanning is disabled and no amount of clicking "Fix" solved this issue. I have tried umpteen reboots and what have you. I really don't want to uninstall and re-install BitDefender (unless there's no other way out). How do I clear away the notification message?

  Read the article

• Good quality voice communication software over Internet for windows

  - by ORA600

  I regularly attend over-the-phone meetings, where is a polycom/polispan device on the other side. The quality of the sound is bad, even those whose English is a first language sometimes are struggling to realize what is being said on the other side. I understand this is because of too aggressive audio compression in the line. Does anyone know any good audio chat software which does not over-compress audio stream. The IP channel between two offices is wide enough. In other words, you should be able to listen to a music (not only a speech) from the remote side with good quality. So, Skype is too over-compressing as well. Does anyone know anything like that?

  Read the article

• Which ports to open on domain vs internet

  - by zsharp

  I have a web server/database/domainController. I notice that ports 137 and 138 on the public IP AND private IP are open on all machines there are also other open ports on 0.0.0.0.(ie. 135, 2002) Can and should I close 137-139 on the public IP only? will that interfere with any services.

  Read the article

• How to publish internal data to the internet - as simple as possible

  - by mlarsen

  I Asked this at Staock Overflow, but I would like your oppinion too as it has as much to do with administration as it does with coding. We have a .net 2-tier application where a desktop program is talking to a database. We support MS SQL Server 2000, 2005, 2008 and Oracle 9, 10 and 11. The application is sold, not as shrink-wrap, but pretty close. It is quite important for us that the installation and configuration is as easy as possible as installation instructions are usually supplied in written form to the customers internal IT-department. Our application is usually not seen as mission critical for the IT-department, so we need to keep their work down to a minimum. Now we are starting to get wishes for a web application build on top of the same data. The web application will be hosted by us and delivered as a SaaS application. Now the challenge is how to move data back and forth between the web application and the customers internal database. as I see it we have some requirements: We must be ready to handle the situation where the customers database is not accessible from the DMZ. I guess the easiest solution is that all communication is initiated from inside the customers lan. As little firewall configuration as possible. The best is if we can run without any special configuration as long as outgoing traffic from the customers lan are not blocked. If we need something changed in the firewall, we must be able to document that the change is secure. It doesn't have to be real time. Moving data in batches every ten minutes or so is OK. Data moves both ways, but not the same tables, so we don't have to support merges. It would be nice if we don't have to roll our own framework completely. Looking forward to hear your suggestions.

  Read the article

• Internet Explorer changes brightness

  - by Sale

  I have a very annoying problem with IE8 on Vista: My screen brightness changes when I view a page with IE. It slowly dimms brightness some 20% - enough to be noticeable. This seems to be dependent on the OVERALL brightness of the page viewed or of the amount of bright space on the page... sometimes it dimms down if the page is bright, sometimes the complete different, it dimms when lot of dark space is on the page. I know this sounds weird, I cannot describe it better. It takes about one,two seconds from on brightness level to the other. This ONLY occurs in IE - not in Word or any other application. Please help! This dimming is very stressfull for my eyes.

  Read the article

• How to fix IE starting when I try to start Opera?

  - by Scott Leis

  I have a problem that started today, where trying to run any of the 3 versions of Opera I have installed causes Internet Explorer to start instead. The Opera versions I have installed are 9.64, 10.10, and 10.63. My OS is Windows Vista with the latest critical/important updates. The behaviour is the same regardless of whether I double-click a shortcut to Opera, double-click on Opera.exe in one of the install directories, or run Opera.exe with the full path from Start-Run. The only work-around I've found is to right-click Opera.exe or a shortcut, and click "Run as administrator". This starts Opera, and it appears to work normally. Opera seems to be the only program so affected. I've checked Firefox and a few other (non-browser) programs, and they work normally. When IE starts instead of Opera, there are always two instances of iexplore.exe started, and they both crash before I can do anything else. IE also crashes if I try to start it from its own shortcut, but I don't know if that only started today, since I hadn't used IE for a few weeks. Does anyone know what might cause this and how to fix it? It's possible my PC has a virus, but BitDefender (for which I have automatic updates enabled) hasn't detected anything.

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >