Search Results

Search found 4181 results on 168 pages for 'exit'.

Page 126/168 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

  • permutations gone wrong

    - by vbNewbie
    I have written code to implement an algorithm I found on string permutations. What I have is an arraylist of words ( up to 200) and I need to permutate the list in levels of 5. Basically group the string words in fives and permutated them. What I have takes the first 5 words generates the permutations and ignores the rest of the arraylist? Any ideas appreciated. Private Function permute(ByVal chunks As ArrayList, ByVal k As Long) As ArrayList ReDim ItemUsed(k) pno = 0 Permutate(k, 1) Return chunks End Function Private Shared Sub Permutate(ByVal K As Long, ByVal pLevel As Long) Dim i As Long, Perm As String Perm = pString ' Save the current Perm ' for each value currently available For i = 1 To K If Not ItemUsed(i) Then If pLevel = 1 Then pString = chunks.Item(i) 'pString = inChars(i) Else pString = pString & chunks.Item(i) 'pString += inChars(i) End If If pLevel = K Then 'got next Perm pno = pno + 1 SyncLock outfile outfile.WriteLine(pno & " = " & pString & vbCrLf) End SyncLock outfile.Flush() Exit Sub End If ' Mark this item unavailable ItemUsed(i) = True ' gen all Perms at next level Permutate(K, pLevel + 1) ' Mark this item free again ItemUsed(i) = False ' Restore the current Perm pString = Perm End If Next K above is = to 5 for the number of words in one permutation but when I change the for loop to the arraylist size I get an error of index out of bounds

    Read the article

  • undefined references

    - by Brandon
    Hello, I'm trying to compile some fortran code and I'm running into some confusing linking errors. I have some code that I compile and place into a static library: >gfortran -c -I../../inc -o bdout.o bdout.F >ar rv libgeo.a bdout.o I then try to compile against that library with some simple test code and get the following: >gfortran -o mytest -L -lgeo mytest.F /tmp/cc4uvcsj.o: In function `MAIN__': mytest.F:(.text+0xb0): undefined reference to `ncwrite1_' collect2: ld returned 1 exit status It's not in the object naming because everything looks fine: >nm -u libgeo.a bdout.o: U _gfortran_exit_i4 U _gfortran_st_write U _gfortran_st_write_done U _gfortran_transfer_character U _gfortran_transfer_integer U ncobjcl_ U ncobjwrp_ U ncopencr_ U ncopenshcr_ U ncopenwr_ U ncwrite1_ U ncwrite2_ U ncwrite3_ U ncwrite4_ U ncwritev_ I can check the original object file too: >nm -u bdout.o U _gfortran_exit_i4 U _gfortran_st_write U _gfortran_st_write_done U _gfortran_transfer_character U _gfortran_transfer_integer U ncobjcl_ U ncobjwrp_ U ncopencr_ U ncopenshcr_ U ncopenwr_ U ncwrite1_ U ncwrite2_ U ncwrite3_ U ncwrite4_ U ncwritev_ The test code simply contains a single call to a function defined in bdout.o: program hello print *,"Hello World!" call ncwrite1( istat, f, ix2, ix3, ix4, ix5, ih ) end program hello I can't figure out what the problem is. Does anyone have any suggestions? Maybe even just a way to track the problem down? Cheers.

    Read the article

  • Enumerating a string

    - by JamesB
    I have a status which is stored as a string of a set length, either in a file or a database. I'm looking to enumerate the possible status' I have the following type to define the possible status' Type TStatus = (fsNormal = Ord('N'),fsEditedOnScreen = Ord('O'), fsMissing = Ord('M'),fsEstimated = Ord('E'),fsSuspect = Ord('s'), fsSuspectFromOnScreen = Ord('o'),fsSuspectMissing = Ord('m'), fsSuspectEstimated = Ord('e')); Firstly is this really a good idea? or should I have a seperate const array storing the char conversions? That would mean more than one place to update. Now convert a string to a status array I have the following, but how can I check if a char is valid without looping through the enumeration? Function StrToStatus(Value : String):TStatusArray; var i: Integer; begin if Trim(Value) = '' then begin SetLength(Result,0); Exit; end; SetLength(Result,Length(Value)); for i := 1 to Length(Value) do begin Result[i] := TStatus(Value[i]); // I don't think this line is safe. end; end; AFAIK this should be fine for converting back again. Function StatusToStr(Value : TStatusArray):String; var i: Integer; begin for i := 0 to Length(Value) - 1 do Result := Result + Chr(Ord(Value[i])) end; I'm using Delphi 2007

    Read the article

  • How to fix codesign when it says user cancelled the operation? (And I didn't)

    - by eipipuz
    I'm compiling an iPhone app meant to be Distributed. It's my first app so I followed the "iPhone Provisioning Profiles" instructions. Unfortunately it fails with this: CodeSign build/*_*_.app cd "/Users/videojuegos/Documents/*_*_" setenv IGNORE_CODESIGN_ALLOCATE_RADAR_7181968 /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/codesign_allocate setenv PATH "/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin:/Developer/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin" /usr/bin/codesign -f -s "iPhone Distribution: ******" "--resource-rules=/Users/videojuegos/Documents/*_*_/build/*_*_.app/ResourceRules.plist" --entitlements "/Users/videojuegos/Documents/*_*_/build/Unity-iPhone.build/Distribution-iphoneos/Unity-iPhone.build/*_*_.xcent" "/Users/videojuegos/Documents/*_*_/build/*_*_.app" /Users/videojuegos/Documents/*_*_/build/*_*_.app: The operation was cancelled by the user. Command /usr/bin/codesign failed with exit code 1 I thought Keychain wasn't allowing Codesign to work but as far as I can tell that isn't the case. I also attempted running these commands from a terminal and it failed with this message: Users/videojuegos/Documents/*_*_/build/Unity-iPhone.build/Distribution-iphoneos/Unity-iPhone.build/*_*_.xcent: cannot read entitlement data I have made the xcode setting from scratch three times. Googled it. No results. I don't have any idea what else to try. Any suggestions?

    Read the article

  • PyQt Drag and Drop - Nothing happens

    - by Umang
    Hi, I'm trying to get drop a file onto a Window (I've tried the same thing with a QListWidget without success there too) test.py: #! /usr/bin/python # Test from PyQt4 import QtCore, QtGui import sys from qt_test import Ui_MainWindow class MyForm(QtGui.QMainWindow, Ui_MainWindow): def __init__(self, parent=None): QtGui.QWidget.__init__(self, parent) self.setupUi(self) self.__class__.dragEnterEvent = self.DragEnterEvent self.__class__.dragMoveEvent = self.DragEnterEvent self.__class__.dropEvent = self.drop self.setAcceptDrops(True) print "Initialized" self.show() def DragEnterEvent(self, event): event.accept() def drop(self, event): link=event.mimeData().text() print link def main(): app = QtGui.QApplication(sys.argv) mw = MyForm() sys.exit(app.exec_()) if __name__== "__main__": main() And here's qt_test.py # -*- coding: utf-8 -*- # Form implementation generated from reading ui file 'untitled.ui' # # Created: Thu May 20 12:23:19 2010 # by: PyQt4 UI code generator 4.6 # # WARNING! All changes made in this file will be lost! from PyQt4 import QtCore, QtGui class Ui_MainWindow(object): def setupUi(self, MainWindow): MainWindow.setObjectName("MainWindow") MainWindow.resize(800, 600) MainWindow.setAcceptDrops(True) self.centralwidget = QtGui.QWidget(MainWindow) self.centralwidget.setObjectName("centralwidget") MainWindow.setCentralWidget(self.centralwidget) self.retranslateUi(MainWindow) QtCore.QMetaObject.connectSlotsByName(MainWindow) def retranslateUi(self, MainWindow): MainWindow.setWindowTitle(QtGui.QApplication.translate("MainWindow", "MainWindow", None, QtGui.QApplication.UnicodeUTF8)) I've read this email and I've followed everything said there. I still don't get any output except "Initialized" and the drag doesn't seem to get accepted (both for files from a file manager and plain text dragged from a text editor). Do you know what I'm doing wrong? Thanks!

    Read the article

  • Removing PDF attachments via itext

    - by r00fus
    I'm trying to remove attachments from a number of my pdf files (I can extract via pdftk, so preserving them is not an issue). I coded the following based on an example found from a google search: import java.io.FileOutputStream; import java.io.IOException; import com.lowagie.text.*; import com.lowagie.text.pdf.*; class pdfremoveattachment { public static void main(String[] args) throws IOException, DocumentException { if (args.length < 2) { System.out.println("Usage: java PDFremoveAttachments source.pdf target.pdf"); System.exit(1); } PdfReader sourcePDF = new PdfReader(args[0]); removeAttachments(sourcePDF); FileOutputStream targetFOS = new FileOutputStream(args[1]); PdfStamper targetPDF = new PdfStamper(sourcePDF,targetFOS); targetPDF.close(); } public static void removeAttachments(PdfReader reader) { PdfDictionary catalog = reader.getCatalog(); // System.out.println(catalog.getAsDict(PdfName.NAME)); // this would print "null" PdfDictionary names = (PdfDictionary)PdfReader.getPdfObject(catalog.get(PdfName.NAMES)); // System.out.println(names.toString()); //this returns NPE if( names != null) { PdfDictionary files = (PdfDictionary) PdfReader.getPdfObject(names.get(PdfName.FILEATTACHMENT)); if( files!= null ){ for( Object key : files.getKeys() ){ files.remove((PdfName)key); } files = (PdfDictionary) PdfReader.getPdfObject(names.get(PdfName.EMBEDDEDFILES)); } if( files!= null ){ for( Object key : files.getKeys() ){ files.remove((PdfName)key); } reader.removeUnusedObjects(); } } } } If anyone knows how I might be able to remove attachments, I'd greatly appreciate a reply.

    Read the article

  • Speeding up a soap powered website

    - by ChrisRamakers
    Hi all, We're currently looking into doing some performance tweaking on a website which relies heavily on a Soap webservice. But ... our servers are located in Belgium and the webservice we connect to is locate in San Francisco so it's a long distance connection to say the least. Our website is PHP powered, using PHP's built in SoapClient class. On average a call to the webservice takes 0.7 seconds and we are doing about 3-5 requests per page. All possible request/response caching is already implemented so we are now looking at other ways to improved the connection speed. This is the code which instantiates the SoapClient, what i'm looking for now is other ways/methods to improve speed on single requestes. Anyone has idea's or suggestions? private function _createClient() { try { $wsdl = sprintf($this->config->wsUrl.'?wsdl', $this->wsdl); $client = new SoapClient($wsdl, array( 'soap_version' => SOAP_1_1, 'encoding' => 'utf-8', 'connection_timeout' => 5, 'cache_wsdl' => 1, 'trace' => 1, 'features' => SOAP_SINGLE_ELEMENT_ARRAYS )); $header_tags = array('username' => new SOAPVar($this->config->wsUsername, XSD_STRING, null, null, null, $this->ns), 'password' => new SOAPVar(md5($this->config->wsPassword), XSD_STRING, null, null, null, $this->ns)); $header_body = new SOAPVar($header_tags, SOAP_ENC_OBJECT); $header = new SOAPHeader($this->ns, 'AuthHeaderElement', $header_body); $client->__setSoapHeaders($header); } catch (SoapFault $e){ controller('Error')->error($id.': Webservice connection error '.$e->getCode()); exit; } $this->client = $client; return $this->client; }

    Read the article

  • Why is there unreachable code here?

    - by Richard
    I am writing a c# app and want to output error messages to either the console or a messagebox (Depending on the app type: enum AppTypeChoice { Console, Windows } ), and also control wether the app keeps running or not ( bool StopOnError ). I came up with this method that will check all the criteria, but I'm getting an "unreachable code detected" warning. I can't see why! Here is the whole method (Brace yourselves for some hobbyist code!) public void OutputError(string message) { string standardMessage = "Something went WRONG!. [ But I'm not telling you what! ]"; string defaultMsgBoxTitle = "Aaaaarrrggggggggggg!!!!!"; string dosBoxOutput = "\n\n*** " + defaultMsgBoxTitle + " *** \n\n Message was: '" + message + "'\n\n"; AppTypeChoice appType = DataDefs.AppType; DebugLevelChoice level = DataDefs.DebugLevel; // Decide how much info we should give out here... if (level != DebugLevelChoice.None) { // Give some info.... if (appType == AppTypeChoice.Windows) MessageBox.Show(message, defaultMsgBoxTitle, MessageBoxButtons.OK, MessageBoxIcon.Error); else Console.WriteLine(dosBoxOutput); } else { // Be very secretive... if (appType == AppTypeChoice.Windows) MessageBox.Show(standardMessage, defaultMsgBoxTitle, MessageBoxButtons.OK, MessageBoxIcon.Error); else Console.WriteLine(standardMessage); } // Decide if app falls over or not.. if (DataDefs.StopOnError == true) Environment.Exit(0); // UNREACHABLE CODE HERE } Also, while I have your attention, to get the app type, I'm just using a constant at the top of the file (ie. AppTypeChoice.Console in a Console app etc) - is there a better way of doing this (i mean finding out in code if it is a DOS or Windows app)? Also, I noticed that I can use a messagebox with a fully-qualified path in a Console app...How bad is is to do that ( I mean, will I get tarred and feathered when other developers see it?!) Thanks for your help

    Read the article

  • forks in C - exercise

    - by Zka
    I try to repeat and learn more advanced uses and options when cutting trees with forks in the jungle of C. But foolishly I find an example which should be very easy as I have worked with forks before and even written some code, but i can't understand it fully. Here comes : main() { if (fork() == 0) { if (fork() == 0) { printf("3"); } else if ((wait(NULL)) > 0) { printf("2"); } } else { if (fork() == 0) { printf("1"); exit(0); } if (fork() == 0) { printf("4"); } } printf("0"); return 0; } Possible solutions are : 3201040 3104200 1040302 4321000 4030201 1403020 where 2, 5 and 6 are correct answers. First of all, shouldn't there be four zeroes in the output? Second... How does one come to the solution at all? Been doing this on paper for almost an hour and I'm not even close to understanding why the given solution are more correct than the false ones (except for nr3 as it can't end with 2 since a 0 must follow). Anyone with his forks in check who can offer some good explanation?

    Read the article

  • Creating a class Hierarchy for Atoms,neutrons,protons,chemical reationc

    - by Smart Zulu
    I need help to create a program that can show the hierarchy of any Atoms and its components (neutrons,protons,electrons,and chemical reaction) Here is a code of what i have done so far,being a novice at the subject using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace Atoms { public class Atoms { protected string name = "Sodium"; protected string element ="Metal"; public virtual void GetInfo() { Console.WriteLine("name: {0}",name); Console.WriteLine("element: {0}", element); } } class Proton : Atoms { public int number = 11 ; public override void GetInfo() { base.GetInfo(); Console.WriteLine("Proton number: {0}",number); } } class Electron : Atoms { public int number = 11; public override void GetInfo() { base.GetInfo(); Console.WriteLine("Electron number: {0}", number); } class Neutrons : Atoms { public int number = 12; public override void GetInfo() { base.GetInfo(); Console.WriteLine("Neutron number: {0}", number); } class TestClass { static void Main() { Proton P = new Proton(); P.GetInfo(); Neutrons N = new Neutrons(); N.GetInfo(); Electron E = new Electron(); E.GetInfo(); Console.WriteLine("click any key to exit"); Console.ReadLine(); } } } } }

    Read the article

  • Getting Error When Opening Files

    - by Nathan Campos
    I'm developing a simple Text Editor to understand better PocketC language, then I've done this: #include "\\Storage Card\\My Documents\\PocketC\\Parrot\\defines.pc" int filehandle; int file_len; string file_mode; initComponents() { createctrl("EDIT", "test", 2, 1, 0, 24, 70, 25, TEXTBOX); wndshow(TEXTBOX, SW_SHOW); guigetfocus(); } main() { filehandle = fileopen(OpenFileDlg("Plain Text Files (*.txt)|*.txt; All Files (*.*)|*.*"), 0, FILE_READWRITE); file_len = filegetlen(filehandle); if(filehandle = -1) { MessageBox("File Could Not Be Found!", "Error", 3, 1); } initComponents(); editset(TEXTBOX, fileread(filehandle, file_len)); } Then I tried to run the application, it opens the Open File Dialog, I select a file(that is at \test.txt) that I've created with notepad, then I got my MessageBox saying that the file wans't found. Then I want to know why I'm getting this if the file is all correct? *PS: When I click to exit the MessageBox, I saw that the TextBox is displaying where the file is(I've tested with many other files, and with all I got the error and this).

    Read the article

  • How do I determine if a terminal is color-capable?

    - by asjo
    I would like to change a program to automatically detect whether a terminal is color-capable or not, so when I run said program from within a non-color capable terminal (say M-x shell in (X)Emacs), color is automatically turned off. I don't want to hardcode the program to detect TERM={emacs,dumb}. I am thinking that termcap/terminfo should be able to help with this, but so far I've only managed to cobble together this (n)curses-using snippet of code, which fails badly when it can't find the terminal: #include <stdlib.h> #include <curses.h> int main(void) { int colors=0; initscr(); start_color(); colors=has_colors() ? 1 : 0; endwin(); printf(colors ? "YES\n" : "NO\n"); exit(0); } I.e. I get this: $ gcc -Wall -lncurses -o hep hep.c $ echo $TERM xterm $ ./hep YES $ export TERM=dumb $ ./hep NO $ export TERM=emacs $ ./hep Error opening terminal: emacs. $ which is... suboptimal.

    Read the article

  • Java OutOfMemoryError message changes when trying to create Arrays of different sizes

    - by Gordon
    In the question by DKSRathore How to simulate the Out Of memory : Requested array size exceeds VM limit some odd behavior was noted when creating an arrays. When creating an array of size Integer.MAX_VALUE an exception with the error java.lang.OutOfMemoryError Requested array size exceeds VM limit was thrown. However when an array was created with a size less than the max but still above the virtual machine memory limit the error message read java.lang.OutOfMemoryError: Java heap space. Testing further I managed to narrow down where the error messages changes. long[] l = new long[2147483645]; exceptions message reads - Requested array size exceeds VM limit long[] l = new long[2147483644]; exceptions message reads - Java heap space errors I increased my virtual machine memory and still produced the same result. Has anyone any idea why this happens? Some extra info: Integer.MAX_VALUE = 2147483647. Edit: Here's the code I used to find the value, might be helpful. int max = Integer.MAX_VALUE; boolean done = false; while (!done) { try { max--; // Throws an error long[] l = new long[max]; // Exit if an error is no longer thrown done = true; } catch (OutOfMemoryError e) { if (!e.getMessage().contains("Requested array size exceeds VM limit")) { System.out.println("Message changes at " + max); done = true; } } }

    Read the article

  • A error about "Address 0x0 is not stack'd, malloc'd or (recently) free'd" in c program under linux

    - by MaiTiano
    There is a piece of my program: height = atoi(argv[3]); width = atoi(argv[2]); sprintf(seqName,"%s", argv[1]); // strcpy(seqName, argv[1]); After compiling it, a exe file test is generated, then I use Valgrind to check it. Then I got the following message, however I cannot understand what it tends to tell me. Can anyone provide some kind help, Thanks. 1 contexts (suppressed: 13 from 8) 1 contexts (suppressed: 13 from 8) jl@ubuntu:~/work/dsr_analysis$ valgrind --tool=memcheck --leak-check=yes ./test ==28940== Memcheck, a memory error detector ==28940== Copyright (C) 2002-2009, and GNU GPL'd, by Julian Seward et al. ==28940== Using Valgrind-3.6.0.SVN-Debian and LibVEX; rerun with -h for copyright info ==28940== Command: ./test ==28940== ==28940== Invalid read of size 1 ==28940== at 0x40260CA: strcpy (mc_replace_strmem.c:311) ==28940== by 0x804A5C6: main (me_search.c:1428) ==28940== Address 0x0 is not stack'd, malloc'd or (recently) free'd ==28940== ==28940== ==28940== Process terminating with default action of signal 11 (SIGSEGV) ==28940== Access not within mapped region at address 0x0 ==28940== at 0x40260CA: strcpy (mc_replace_strmem.c:311) ==28940== by 0x804A5C6: main (me_search.c:1428) ==28940== If you believe this happened as a result of a stack ==28940== overflow in your program's main thread (unlikely but ==28940== possible), you can try to increase the size of the ==28940== main thread stack using the --main-stacksize= flag. ==28940== The main thread stack size used in this run was 8388608. ==28940== ==28940== HEAP SUMMARY: ==28940== in use at exit: 0 bytes in 0 blocks ==28940== total heap usage: 0 allocs, 0 frees, 0 bytes allocated ==28940== ==28940== All heap blocks were freed -- no leaks are possible ==28940== ==28940== For counts of detected and suppressed errors, rerun with: -v ==28940== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 13 from 8)1 contexts (suppressed: 13 from 8) 1 contexts (suppressed: 13 from 8)

    Read the article

  • Close application on error

    - by poke
    I’m currently writing an application for the Android platform that requires a mounted SD card (or ExternalStorage). I know that it might not be the best way to require something like that, but the application will work with quite a lot of data, and I don’t even want to think about storing that on the device’s storage. Anyway, to ensure that the application won’t run without the external storage, I do a quick check in the activity’s onCreate method. If the card is not mounted, I want to display an error message and then quit the application. My current approach looks like this: public void onCreate ( Bundle savedInstanceState ) { super.onCreate( savedInstanceState ); setContentView( R.layout.main ); try { // initialize data storage // will raise an exception if it fails, or the SD card is not mounted // ... } catch ( Exception e ) { AlertDialog.Builder builder = new AlertDialog.Builder( this ); builder .setMessage( "There was an error: " + e.getMessage() ) .setCancelable( false ) .setNeutralButton( "Ok.", new DialogInterface.OnClickListener() { public void onClick ( DialogInterface dialog, int which ) { MyApplication.this.finish(); } } ); AlertDialog error = builder.create(); error.show(); return; } // continue ... } When I run the application, and the exception gets raised (I raise it manually to check if everything works), the error message is displayed correctly. However when I press the button, the application closes and I get an Android error, that the application was closed unexpectedly (and I should force exit). I read some topics before on closing an application, and I know that it maybe shouldn’t happen like that. But how should I instead prevent the application from continuing to run? How do you close the application correctly when an error occurs?

    Read the article

  • Check if files in a directory are still being written using Windows Batch Script

    - by FMFF
    Hello. Here's my batch file to parse a directory, and zip files of certain type REM Begin ------------------------ tasklist /FI "IMAGENAME eq 7za.exe" /FO CSV > search.log FOR /F %%A IN (search.log) DO IF %%~zA EQU 0 GOTO end for /f "delims=" %%A in ('dir C:\Temp\*.ps /b') do ( "C:\Program Files\7-Zip\cmdline\7za.exe" a -tzip -mx9 "C:\temp\Zip\%%A.zip" "C:\temp\%%A" Move "C:\temp\%%A" "C:\Temp\Archive" ) :end del search.log REM pause exit REM End --------------------------- This code works just fine for 90% of my needs. It will be deployed as a scheduled task. However, the *.ps files are rather large (minimum of 1GB) in real time cases. So the code is supposed to check if the incoming file is completely written and is not locked by the application that is writing it. I saw another example elsewhere, that suggested the following approach :TestFile ren c:\file.txt c:\file.txt if errorlevel 0 goto docopy sleep 5 goto TestFile :docopy However this example is good for a fixed file. How can I use that many labels and GoTo's inside a for loop without causing an infinite loop? Or is this code safe to be used in the For Loop? Thank you for any help.

    Read the article

  • python 'with' statement

    - by Stephen
    Hi, I'm using Python 2.5. I'm trying to use this 'with' statement. from __future__ import with_statement a = [] with open('exampletxt.txt','r') as f: while True: a.append(f.next().strip().split()) print a The contents of 'exampletxt.txt' are simple: a b In this case, I get the error: Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/tmp/python-7036sVf.py", line 5, in <module> a.append(f.next().strip().split()) StopIteration And if I replace f.next() with f.read(), it seems to be caught in an infinite loop. I wonder if I have to write a decorator class that accepts the iterator object as an argument, and define an __exit__ method for it? I know it's more pythonic to use a for-loop for iterators, but I wanted to implement a while loop within a generator that's called by a for-loop... something like def g(f): while True: x = f.next() if test(x): a = x elif test(x): b = f.next() yield [a,x,b] a = [] with open(filename) as f: for x in g(f): a.append(x)

    Read the article

  • Java the little console game won't repeat?

    - by Jony Kale
    Okay, what I have so far is: You enter the game, and write "spin" to the console. Program will enter the while loop. In the while loop, if entered int is -1, return to the back (Set console input back to "", and let the user select what game he would like to play). Problem: Instead of going back, and selecting "spin" again, the program exits? Why is it happening? How can I fix this? private static Scanner console = new Scanner(System.in); private static Spin spin = new Spin(); private static String inputS = ""; private static int inputI = 0; private static String[] gamesArray = new String[] {"spin", "tof"}; private static boolean spinWheel = false; private static boolean tof = false; public static void main (String[] args) { if (inputS.equals("")) { System.out.println("Welcome to the system!"); System.out.print("Please select a game: "); inputS = console.nextLine(); } while (inputS.equals("spin")) { System.out.println("Welcome to the spin game! Please write 1 to spin. and -1 to exit back"); inputI = console.nextInt(); switch (inputI) { case 1: break; case -1: inputI = 0; inputS = ""; break; } } }

    Read the article

  • I'm trying to install psycopg2 onto Mac OS 10.6.3; it claims it can't find "stdarg.h" but I can see

    - by cojadate
    I'm desperately trying to successfully install psycopg2 but keep running into errors. The latest one seems to involve it not being to find "stdarg.h" (see code below). However I can see with my own eyes that a file called stdarg.h exists at /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h (where it claims it can't find anything) so I've no idea what to do about it. I'm running Mac OS 10.6.3 and within the last few days I've made sure I have all the latest OS developer tools. I have Python 2.6.2 and PostgreSQL 8.4 if that makes any difference. python setup.py install running install running build running build_py running build_ext building 'psycopg2._psycopg' extension creating build/temp.macosx-10.3-fat-2.6 creating build/temp.macosx-10.3-fat-2.6/psycopg gcc -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -O3 -DPSYCOPG_DEFAULT_PYDATETIME=1 -DPSYCOPG_VERSION="2.2.1 (dt dec ext pq3)" -DPG_VERSION_HEX=0x080404 -DPSYCOPG_EXTENSIONS=1 -DPSYCOPG_NEW_BOOLEAN=1 -DHAVE_PQFREEMEM=1 -DHAVE_PQPROTOCOL3=1 -I/Library/Frameworks/Python.framework/Versions/2.6/include/python2.6 -I. -I/opt/local/include/postgresql84 -I/opt/local/include/postgresql84/server -c psycopg/psycopgmodule.c -o build/temp.macosx-10.3-fat-2.6/psycopg/psycopgmodule.o In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4, from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85, from psycopg/psycopgmodule.c:27: /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4, from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85, from psycopg/psycopgmodule.c:27: /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory lipo: can't figure out the architecture type of: /var/folders/MQ/MQ-tWOWWG+izzuZCrAJpzk+++TI/-Tmp-//ccakFhRS.out error: command 'gcc' failed with exit status

    Read the article

  • Python: Best way to check for Python version in program that uses new language features?

    - by Mark Harrison
    If I have a python script that requires at least a particular version of python, what is the correct way to fail gracefully when an earlier version of python is used to launch the script? How do I get control early enough to issue an error message and exit? For example, I have a program that uses the ternery operator (new in 2.5) and "with" blocks (new in 2.6). I wrote a simple little interpreter-version checker routine which is the first thing the script would call ... except it doesn't get that far. Instead, the script fails during python compilation, before my routines are even called. Thus the user of the script sees some very obscure synax error tracebacks - which pretty much require an expert to deduce that it is simply the case of running the wrong version of python. update I know how to check the version of python. The issue is that some syntax is illegal in older versions of python. Consider this program: import sys if sys.version_info < (2, 4): raise "must use python 2.5 or greater" else: # syntax error in 2.4, ok in 2.5 x = 1 if True else 2 print x When run under 2.4, I want this result $ ~/bin/python2.4 tern.py must use python2.5 or greater and not this result: $ ~/bin/python2.4 tern.py File "tern.py", line 5 x = 1 if True else 2 ^ SyntaxError: invalid syntax (channeling for a coworker)

    Read the article

  • iPhone static library Clang/LLVM error: non_lazy_symbol_pointers

    - by Bekenn
    After several hours of experimentation, I've managed to reduce the problem to the following example (C++): extern "C" void foo(); struct test { ~test() { } }; void doTest() { test t; // 1 foo(); // 2 } This is being compiled for iOS devices in XCode 4.2, using the provided Clang compiler (Apple LLVM compiler 3.0) and the iOS 5.0 SDK. The project is configured as a Cocoa Touch Static Library, and "Enable Linking With Shared Libraries" is set to No because I'm building an AIR native extension. The function foo is defined in another external library. (In my actual project, this would be any of the C API functions defined by Adobe for use in AIR native extensions.) When attempting to compile this code, I get back the error: FATAL:incompatible feature used: section type non_lazy_symbol_pointers (must specify "-dynamic" to be used) clang: error: assembler command failed with exit code 1 (use -v to see invocation) The error goes away if I comment out either of the lines marked 1 or 2 above, or if I change the build setting "Enable Linking With Shared Libraries" to Yes. (However, if I change the build setting, then I get multiple ld warning: unexpected srelocation type 9 warnings when linking the library into the final project, and the application crashes when running on the device.) The build error also goes away if I remove the destructor from test. So: Is this a bug in Clang? Am I missing some all-important and undocumented build setting? The interaction between an externally-provided function and a struct with a destructor is very peculiar, to say the least.

    Read the article

  • php file force download

    - by droidus
    When I use this code to download this image (only used for testing purposes), I open the downloaded image, and all it gives me is an error. i tried it in chrome. opening it with windows photo viewer, it says that it can't display the picture because it is empty??? here is the code: <?PHP // Define the path to file $file = 'http://www.media.lonelyplanet.com/lpi/12553/12553-11/469x264.jpg'; if(!file) { // File doesn't exist, output error die('file not found'); } else { header('Content-Description: File Transfer'); header('Content-Type: application/octet-stream'); header('Content-Disposition: attachment; filename='.basename($file)); header('Content-Transfer-Encoding: binary'); header('Expires: 0'); header('Cache-Control: must-revalidate, post-check=0, pre-check=0'); header('Pragma: public'); header('Content-Length: ' . filesize($file)); ob_clean(); flush(); readfile($file); exit; } ?>

    Read the article

  • ZIP Numerous Blob Files

    - by Michael
    I have a database table that contains numerous PDF blob files. I am attempting to combine all of the files into a single ZIP file that I can download and then print. Please help! <?php include 'config.php'; include 'connect.php'; $session= $_GET[session]; $query = " SELECT $tbl_uploads.username, $tbl_uploads.description, $tbl_uploads.type, $tbl_uploads.size, $tbl_uploads.content, $tbl_members.session FROM $tbl_uploads LEFT JOIN $tbl_members ON $tbl_uploads.username = $tbl_members.username WHERE $tbl_members.session= '$session'"; $result = mysql_query($query) or die('Error, query failed'); while(list($username, $description, $type, $size, $content) = mysql_fetch_array($result)) { header("Content-length: $size"); header("Content-type: $type"); header("Content-Disposition: inline; filename=$username-$description.pdf"); echo $content; } $files = array('File 1 from database', 'File 2 from database'); $zip = new ZipArchive; $zip->open('file.zip', ZipArchive::CREATE); foreach ($files as $file) { $zip->addFile($file); } $zip->close(); header('Content-Type: application/zip'); header('Content-disposition: attachment; filename=filename.zip'); header('Content-Length: ' . filesize($zipfilename)); readfile($zipname); mysql_close($link); exit; ?>

    Read the article

  • Violation of PRIMARY KEY constraint 'PK_

    - by abhi
    hi am trying to write a code in which i need to perform a update but on primary keys how do i achieve it i have written the following code: kindly look at it let me know where m wrong Protected Sub rgKMSLoc_UpdateCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) Handles rgKMSLoc.UpdateCommand Try KAYAReqConn.Open() If TypeOf e.Item Is GridEditableItem Then Dim strItemID As String = CType(e.Item.FindControl("hdnID"), HiddenField).Value Dim strrcmbLocation As String = CType(e.Item.FindControl("rcmbLocation"), RadComboBox).SelectedValue Dim strKubeLocation As String = CType(e.Item.FindControl("txtKubeLocation"), TextBox).Text Dim strCSVCode As String = CType(e.Item.FindControl("txtCSVCode"), TextBox).Text SQLCmd = New SqlCommand("SELECT * FROM MstKMSLocKubeLocMapping WHERE LocationID= '" & rcmbLocation.SelectedValue & "'", KAYAReqConn) Dim dr As SqlDataReader dr = SQLCmd.ExecuteReader If dr.HasRows Then lblMsgWarning.Text = "<font color=red>""User ID Already Exists" Exit Sub End If dr.Close() SQLCmd = New SqlCommand("UPDATE MstKMSLocKubeLocMapping SET LocationID=@Location,KubeLocation=@KubeLocation,CSVCode=@CSVCode WHERE LocationID = '" & strItemID & "'", KAYAReqConn) SQLCmd.Parameters.AddWithValue("@Location", Replace(strrcmbLocation, "'", "''")) SQLCmd.Parameters.AddWithValue("@KubeLocation", Replace(strKubeLocation, "'", "''")) SQLCmd.Parameters.AddWithValue("@CSVCode", Replace(strCSVCode, "'", "''")) SQLCmd.Parameters.AddWithValue("@Status", "A") SQLCmd.ExecuteNonQuery() lblMessageUpdate.Text = "<font color=blue>""Record Updated SuccessFully" SQLCmd.Dispose() rgKMSLoc.Rebind() End If Catch ex As Exception Response.Write(ex.ToString) Finally KAYAReqConn.Close() End Try End Sub this is my designer page' Location: ' / ' DataSourceID="dsrcmbLocation" DataTextField="Location" DataValueField="LocationID" Height="150px" Kube Location: ' Class="forTextBox" MaxLength="4" onkeypress="return filterInput(2,event);" CSV Code: ' Class="forTextBox" MaxLength="4" onkeypress="return filterInput(2,event);" <tr class="tableRow"> <td colspan="2" align="center" class="tableCell"> <asp:ImageButton ID="btnUpdate" runat="server" CommandName="Update" CausesValidation="true" ValidationGroup="Update" ImageUrl="~/Images/update.gif"></asp:ImageButton> <asp:ImageButton ID="btnCancel" runat="server" CausesValidation="false" CommandName="Cancel" ImageUrl="~/Images/No.gif"></asp:ImageButton> </td> </tr> </table> </FormTemplate> </EditFormSettings> Locationid is my primary key

    Read the article

  • Qt - QWebView Problem

    - by user547057
    Hi, I have a PyQt gui script which consists of a QWebView widget. I'm trying to send a GET request, i.e go to a page, fill a form and hit click using the code at the bottom of this question. Since i'm dealing with the documentElement(a QWebElement) of the webview, I need to place all DOM actions in a separate function(which I have named fillForm) and connect the loadFinished() signal into the function. Without connecting the signal, the document will not have loaded and I won't be able to get the elements I want. I'm able to submit the form correctly and get the proper response from the webpage. The problem i'm having is that, the above leads to a sort of infinite loop. This is because the webpage gets reloaded each time a new page is loaded, so the form gets filled each and every single time without stopping. I'd like to know if there's some way of finding out whether the WebView's page has loaded fully, non-asynchronously or maybe pause execution of the script(without freezing the gui) until the whole document has loaded. I'm unable to come up with a satisfactory solution(my idea consisted of keeping a global variable to track clicks) to this problem. I would appreciate it if someone could help me out with a better way to tackle this. Thanks! Here's the code i'm using import sys from PyQt4.QtCore import * from PyQt4.QtGui import * from PyQt4.QtWebKit import * from PyQt4 import QtCore app = QApplication(sys.argv) web = QWebView() web.load(QUrl("http://mywebsite.com")) def fillForm(): doc = web.page().mainFrame().documentElement() searchform = doc.findFirst("input[type=text]") searchform.setAttribute("value", "hello") button = doc.findFirst("input[type=submit]") button.evaluateJavaScript("click()") QtCore.QObject.connect(web, QtCore.SIGNAL("loadFinished"), fillForm) web.show() sys.exit(app.exec_())

    Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >