Search Results

Search found 7164 results on 287 pages for 'powerline networking'.

Page 127/287 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• Wireless DHCP doesn't work until wired Ethernet plugged in

  - by MT_Head

  A client of mine has an Asus R1F tablet running Windows XP Tablet SP3. It has an Intel 3945ABG wireless card; wired Ethernet is a Realtek something-or-other. In the past few days, it's developed an odd problem: WiFi authenticates, but can't get an address via DHCP. plug in wired Ethernet - both interfaces get good addresses unplug cable, WiFi continues to work until shutdown. Next morning, repeat process. I've tried: turning WiFi off/on (there's a slider switch) disabling/re-enabling via Device Mangler uninstalling and reinstalling the driver for the 3945ABG... changing from Intel Pro/SET to Windows Wireless Zero Config (and back) restarting the router changing the static DHCP assignments at the router upgrading the router firmware, just on general principles The router/access point is pfSense 1.2.3RC1 (was 1.2.2); wireless card is Atheros-based. None of the 12 other users (5 with tablets) are having problems.

  Read the article

• Why my laptop sends ARP request to itself ?

  - by user58859

  I have just started to learn about protocols. While studying the packets in wireshark, I came across a ARP request sent by my machine to my own IP. Here is the details of the packet : No. Time Source Destination Protocol Info 15 1.463563 IntelCor_aa:aa:aa Broadcast ARP Who has 192.168.1.34? Tell 0.0.0.0 Frame 15: 42 bytes on wire (336 bits), 42 bytes captured (336 bits) Arrival Time: Jan 7, 2011 18:51:43.886089000 India Standard Time Epoch Time: 1294406503.886089000 seconds [Time delta from previous captured frame: 0.123389000 seconds] [Time delta from previous displayed frame: 0.123389000 seconds] [Time since reference or first frame: 1.463563000 seconds] Frame Number: 15 Frame Length: 42 bytes (336 bits) Capture Length: 42 bytes (336 bits) [Frame is marked: False] [Frame is ignored: False] [Protocols in frame: eth:arp] [Coloring Rule Name: ARP] [Coloring Rule String: arp] Ethernet II, Src: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa), Dst: Broadcast (ff:ff:ff:ff:ff:ff) Destination: Broadcast (ff:ff:ff:ff:ff:ff) Address: Broadcast (ff:ff:ff:ff:ff:ff) .... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast) .... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default) Source: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa) Address: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa) .... ...0 .... .... .... .... = IG bit: Individual address (unicast) .... ..0. .... .... .... .... = LG bit: Globally unique address (factory default) Type: ARP (0x0806) Address Resolution Protocol (request) Hardware type: Ethernet (0x0001) Protocol type: IP (0x0800) Hardware size: 6 Protocol size: 4 Opcode: request (0x0001) [Is gratuitous: False] Sender MAC address: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa) Sender IP address: 0.0.0.0 (0.0.0.0) Target MAC address: 00:00:00_00:00:00 (00:00:00:00:00:00) Target IP address: 192.168.1.34 (192.168.1.34) Here the sender's mac address is mine(Here I have hiden my mac address). target IP is mine. Why my machine is sending ARP request to itself? I found 3 packets of this type. There was no ARP reply for these packets. Can anybody explain me why it is? (My operating system is windows-7. I am directly connected to a wifi modem. I got these packets as soon as I started my connection.) I want one suggestion also. many places I read that RFC's are enough for study about protocols. I studied the RFC 826 on ARP. I personally feel that is not enough at all. Any suggestion regarding this? Is there more then 1 RFC for a protocol? I want to study about the protocols in very detail. Can anybody guide me for this? Thanks in advance.

  Read the article

• Ubuntu with KVM guest VM and broken bridges

  - by MadPsy

  I have an Ubuntu box with a KVM guest VM running. They use bridging so the guest VM attaches to the physical network of its host. The guest VM has 2 NICs in 2 different bridges. First NIC of the VM is tap5 and is in bridge br0 br0 8000.46720f5c572e no eth0.500 tap5 Second NIC of the VM is tap2 and is in bridge br100 br100 8000.76ad2fc96661 no eth0.100 eth0.101 eth0.103 eth0.104 eth0.105 tap2 On the host, br0 has an IP and br100 does not 21: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 46:72:0f:5c:57:2e brd ff:ff:ff:ff:ff:ff inet 192.168.100.4/24 brd 192.168.10.255 scope global br0 inet6 fe80::d6ae:52ff:febe:777/64 scope link valid_lft forever preferred_lft forever On the guest, its eth0 and eth1 interfaces both have IP addresses 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:3e:61:fb:7a:da brd ff:ff:ff:ff:ff:ff inet 192.168.100.6/24 brd 192.168.100.255 scope global eth0 inet6 fe80::23e:61ff:fefb:7ada/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:3e:61:fb:7a:ea brd ff:ff:ff:ff:ff:ff inet 172.16.50.129/25 brd 172.16.50.255 scope global eth1 inet6 fe80::23e:61ff:fefb:7aea/64 scope link valid_lft forever preferred_lft forever On the guest VM, a tcpdump of its eth1 interface (tap2) shows traffic from its eth0 interface (tap5), as if the 2 bridges are themselves bridged. This means any interface on br100 is now bridged across to br0 - which is completely broken. root@chillispot:~# tcpdump -c 1 -n -v -i eth1 net 192.168.100.0/24 tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 16:31:24.175583 IP (tos 0x0, ttl 64, id 48054, offset 0, flags [DF], proto TCP (6), length 148) 192.168.100.6.22 > 192.168.100.4.59505: Flags [P.], cksum 0x6c2b (correct), seq 1056321648:1056321744, ack 398642983, win 1700, options [nop,nop,TS val 197473436 ecr 200655363], length 96 What could be bridging the 2 bridges, except the guest VM (which is a stock Ubuntu install)? I am at a complete loss! Thanks.

  Read the article

• What does this TCP Packet mean ?

  - by asksuperuser

  I'm total newbie at tcp/ip and I was experimenting with Wireshark. What this mean: 1824 578.194204 xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy UDP Source port: 17500 Destination port: 17500 In data I can see that my user pc name is sent (happily it's a generic name): does this mean someone is trying to hack my pc ?

  Read the article

• udhcpc doesn't assign ip address

  - by Diab

  i have a board running linux 2.6.28 and i have one Ethernet interface (eth0) i want dhcp to assign dynamic ip to this interface. i have busybox with udhcpc in the file system and the kernel has the "Pack Socket" enabled so i copied the scripts from "busybox-1.14.1/examples/udhcp" to my board on "/etc/udhcpc/" (i created this directory) and when i run : ifconfig eth0 up the interface is up but without ip address, then running udhcpc -i eth0 -s /etc/udhcpc/sample.script i get the following: note : sample.script contains : "exec /etc/udhcpc/sample.$1" # udhcpc -i eth0 -s /etc/udhcpc/sample.script udhcpc (v1.14.1) started Sending discover... Sending select for 192.168.10.198... Lease of 192.168.10.198 obtained, lease time 691200 but when i check with ifconfig i can see that it didn't assign the ip address to eth0. anyone have an idea why udhcpc didn't assign the ip ? Thanx

  Read the article

• Automatic layout of manual network mapping

  - by Paul

  So I have a small business network mainly consisting of two routed layer-2 domains with a total of ca. 100 devices spread over ca. 2000m² production and office spaces. Typical problems to solve using the graph would be: Over what (cable) path is a PC connected to the server? Where to expect devices connected to a switch port? I want to generate a graph of the physical network topology: Nodes are endpoint devices, switch ports, wall outlets, patch panel ports etc. Edges are cable connections. Ideally, grouping edges (or segments) that pass through the same bundle could be grouped. Also I would like to augment the graph data with automatically gathered data (monitoring state, MAC address, Switch port <- MAC entries to build up parts of the map). At the moment I use graphviz for this inside a Confluence wiki like that: layout = "neato" overlap = scale subgraph { rankdir = "TB" subgraph cluster_r1pf1 { r1pf1 [label="{ Rack 1 PF 1 | { <p1>P1 | <p2>P2 | <p3>P3} }", shape=record] } subgraph cluster_switch1 { switch1 [label="{ Rack 1 Switch 1 | { <p1> P1 | <p1> P1 | <p3> P3} }", shape=record] } r1pf1:p1 -> switch1:p1 (obviously there are dozens of entries omitted here) Problem is: I have a hard time to influence graphviz to generate a bearable layout. Edges overlap so bad that you can't read the diagram anymore. The question is: What other tools (be it interactive like Visio, Omnigraffle or I/O-oriented like graphviz) exist that would allow an easily versionable (as in: Operates on a text file) documentation that is both machine and human readable and editable? Why not OmniGraffle or Visio? Well we don't have Macs and Visio is not available at the moment. To buy it I would need good arguments. Automation would be one of that. But last time I looked, versioning Visio files or even thinking about automatic handling was a nightmare. Related: Network Mapping Tools basically asks the same with a focus on generating the complete graph automatically (but without the need to document cabling connections) Recommendations for automatic computer inventory brings up links of "all-in-one" solutions

  Read the article

• No Connectivity to ESX guests on one server

  - by Sam Cogan

  I have a number of ESX servers hosting VM's, all but one of these works ok, however one server has a problem where any guests on not contactable over the network. The ESX hosts is contactable, is integrated int VCenter, and you can even live migrate VM's to and from this server, but any VM's on that server are unable to talk to the rest of the network. The VM's NIC is shown as Up and has the right IP configuration, and as soon as you move it back to another host it works fine.

  Read the article

• Sendind an internet radio singal from my hifi to a portable

  - by Paul

  I'm just about to set myself up with a wireless network in my house. This is so that I can intregate an internet radio into my hifi system. What I would love to do is to listen to the radio in another room of the house. I also have a little portable radio/cd player that has a USB port on the front. Is there something I could buy which would allow me to listen to the radio through my portable in another room? I do realize that I could solve this problem by buying some wireless portable speakers, however I just wondered if anybody knew another way i.e. bluetooth or something similar?

  Read the article

• High load average due to high system cpu load (%sys)

  - by Nick

  We have server with high traffic website. Recently we moved from 2 x 4 core server (8 cores in /proc/cpuinfo), 32 GB RAM, running CentOS 5.x, to 2 x 4 core server (16 cores in /proc/cpuinfo), 32 GB RAM, running CentOS 6.3 Server running nginx as a proxy, mysql server and sphinx-search. Traffic is high, but mysql and sphinx-search databases are relatively small, and usually everything works blazing fast. Today server experienced load average of 100++. Looking at top and sar, we noticed that (%sys) is very high - 50 to 70%. Disk utilization was less 1%. We tried to reboot, but problem existed after the reboot. At any moment server had at least 3-4 GB free RAM. Only message shown by dmesg was "possible SYN flooding on port 80. Sending cookies.". Here is snippet of sar 11:00:01 CPU %user %nice %system %iowait %steal %idle 11:10:01 all 21.60 0.00 66.38 0.03 0.00 11.99 We know that this is traffic issue, but we do not know how to proceed future and where to check for solution. Is there a way we can find where exactly those "66.38%" are used. Any suggestions would be appreciated.

  Read the article

• Can I get simple name resolution on the local network without DNS, on a Mac?

  - by tim

  I've got Mantis running on a Linux VM with a Win2k8 server host. I installed Samba with the following configuration: [global] workgroup = COMPANY netbios name = MANTIS security = share Now on all our windows machines people can simple go to http://mantis, rather than http://172.16.0.20. However, this doesn't appear to work on the Mac machines. Any ideas how I can sort this without changing anything on the Windows server?

  Read the article

• Unexpected network traffic?

  - by robwalker

  My internet connection is via a fixed wireless connection using a 900MHz Motorola Canopy module. The router reports a fairly consistent 32-64Kbps of incoming traffic on the WAN port. When I attached a PC directly to the port and run Wireshark, I get a dump showing a lot of chatter from other machines that I presume are connected to the same tower. This didn't include end-to-end traffic, but was there were a lot of ARP requests, SSDP traffic, ICMP and other network discovery type stuff. Is this 'normal' or does it suggest a misconfiguration somewhere? As far as I can tell there is no need for my modem to be receiving any of this traffic (other than wanting to know what the names of my neighbours machines and printers are!) Since the internet connection is slow at the best of time, having this amount of background noise seems very wasteful.

  Read the article

• Which ports to open on host firewall so that network printing and scanning works?

  - by George Pligor

  I have a multi-functional machine which is both a laser printer and a scanner (Samsung SC-4705ND) I am not able to make the scanner work with the (software) firewall installed in my computer turned on. Operating system is ubuntu 12.04 with regular firewall. if firewall is turned off then everything works as expected I run nmap to discover open services on the samsung machine and I opened all these ports: 80, 427, 515, 631, 5200, 9100, 10001 but with not luck.. How should I configure firewall?

  Read the article

• replacing 3 Cisco Catalyst 4500

  - by hoberion

  Our network supplier recommends replacing our 3 cisco catalyst 4500's because they are EOL and dont speak OSPF (which we really want) Its not my area of expertise so I cant say for sure if we really need to replace these units but for my company the estimated costs of 250K euro is a huge problem. Is there any way to cut down on costs (without moving from cisco devices), I heard the 4500´s can speak ospf but would need an upgrade of sorts? edit: version: IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version 12.2(20)EW, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) supervisor: WS-X4013+ Cisco Catalyst 4500 Series Supervisor Engine II-Plus density: WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45)

  Read the article

• What kind of router do I need to handle multiple external I.P addresses?

  - by user1308743

  I have 3 dedicated I.P addresses going to a location with a few servers, and 1 RVS4000 router. Right now, only one I.P is being used. I would like a router that can use all 3 I.P addresses and I can make rules like this: IP1:80 goes to ServerA IP2:80 goes to ServerB What kind of router/device with what features do I need to handle this? I will need to set 30-40 rules to forward certain ports to certain servers. Only a couple ports will need to go to IP2 or IP3. Thanks

  Read the article

• VM can't connect to outside in bridged mode

  - by Kamal

  Hi Guys, I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have.

  Read the article

• Linksys by Cisco EZXS55W EtherFast 10/100 5-Port Workgroup Switch

  - by studiohack

  I'm looking into buying a switch to expand the one ethernet port on one level. I'm considering "Linksys by Cisco EZXS55W EtherFast 10/100 5-Port Workgroup Switch" from Amazon, but I'm not sure what the 'Etherfast' and the 'Workgroup Switch' parts mean? Will it work like a regular switch, or is it different? Thanks!

  Read the article

• OpenVPN to connect remote networks, peer to peer instead of client/server possible?

  - by John Robertson

  I would like to connect two remote networks using OpenVPN. I am very new to this we are very small and don't have a sys/network admin. What are the possible setups to have both networks both live on a common LAN via OpenVPN? I would prefer to use the UDP peer model rather than client/server. Is there a way to set that up instead? I can't see how because no computer on existing network A has a routable address to any computer on existing network B and vice versa.

  Read the article

• Internet keeps getting Disconnected & Reconnected

  - by Paul

  I have an Internet connection thru a Phone company which uses DSL modem to connect. For past few weeks my net connection keeps getting disconnected for few seconds & it reconnects automatically. I asked the service provider & they checked & even replaced some wires but of no help. Funny thing is that sometimes there seems to be a rhythm where it disconnects for an average of 13 seconds or so plus or minus few seconds, for hours at a time. I don't know how to attach an image to this post where it shows the pattern of connect & disconnect. I have taken an image using snagit to show the timing pattern. If someone can explain it, I can attach it here. Thanks

  Read the article

• Ninety-Fifth Percentile Calculation for Bandwidth

  - by Kyle Brandt

  I am trying to calculate the bandwidth of my current internet connection. I am pulling the current input and output transfer rate via snmp. If the argument to the following function is a sorted ascending list of the the some of each input and output sample, is this the right way to calculate 95th percentile? sub ninetyFifth { #Expects Sorted Data my $ninetyFifthLine = (@_ * .95) - 1; return $_[$ninetyFifthLine]; }

  Read the article

• Working WCF WebServices with NLB server

  - by gguth

  Im starting the architecture of a new project using WCF, but im not the right person to make some network considerations, so im doing some research but cannot find the answers to these questions: We´ll host the WCF service in a common Windows Service app in 2 servers and we´ll have another server to make the Load-Balancing job using the WNLB. The fact that we are hosting the WCF in a Windows Service app can disturb the NLB job? Before my research i thought the load balancing was tought to configure, but with NLB it seems to be very simple, its really that simple? Note: The binding will be basicHttpBinding

  Read the article

• Windows 7 fails to connect to the internet a few minutes after startup

  - by SageTheGreat

  Problem Earlier today, when I turned on my desktop computer, my internet connection works fine. Cryptocurrency miners connecting and hashing as usual and I can browse websites. But after a few minutes, my miner fails indicating that there is something wrong with my internet connection. Tried refreshing my browser and is stuck at "resolving host", and then presented me an error. After that, i can't browse sites anymore. But the weird thing is that the network icon in Windows 7 shows no signs of problems. Solutions Made Restarted my computer without doing anything: Problem persists. Tried using the network troubleshooter of windows: Reported no problems Stopped bonjour still no progress. Loaded windows using Last good config: still no progress. Restarted Modem: No change. Current Status I currently did a system restore to my system to a point before installing the latest update from Microsoft. Because earlier today, I installed some updates and after that, the problem started to appear. (After system restore, same problem.) Latest Programs installed before the problem MS Visual Studio 2013 (but internet still worked fine after the install). I hope someone could provide answers on this problem. It is my first time encountering this. EDIT: Additional Info OS: Windows 7 SP1 64-bit AV: Avast Free Antivirus Internet Connection Type: Ethernet It appears that my Laptop can't even connect to the machine thru Remote Desktop My laptop and phone on WiFi works fine and can connect to the internet. EDIT 2: Whenever I boot into Safe Mode, my Internet is fine.

  Read the article

• Pushing WiFi configuration through Active Directory

  - by Hank Gettinger

  I'm trying to push wifi settings to client computers through Active Directory, something that will add a defaul SSID to connect to and a WPA password. The only thing I've heard of is a script by Aruba labs called wificfg_xp.exe on a couple of forums (Here and here), but the link to the download page is always broken. Does any one know of an alternative way to download this file, or another way to push these settings with AD?

  Read the article

• racoon-tool doesn't generate full racoon.conf file in /var/lib/racoon/racoon.conf

  - by robthewolf

  I am using ipsec-tools/racoon to create my VPN. I am using racoon-tool to configure racoon.conf but when I run racoon-tool reload it only generates the first section - Global items. When I run racoon-tool I get: # racoon-tool reload Loading SAD and SPD... SAD and SPD loaded. Configuring racoon...done. This is the entire file /var/lib/racoon/racoon.conf # # Racoon configuration for Samuel # Generated on Wed Jan 5 21:31:49 2011 by racoon-tool # # # Global items # path pre_shared_key "/etc/racoon/psk.txt"; path certificate "/etc/racoon/certs"; log debug; I cannot find anywhere a solution as to why this is happening. Please help

  Read the article

• Network latency and speed of light

  - by James

  This was kinda of covered by the following Is minimum latency fixed by the speed of light? , but i would like to add the follow up a bit. The scenario is as follows; we have two opposing sites one on the West Coast of the US and one in Ireland. The customer is in central Europe, and has requested a latency test. Ireland gives responses of ~65-70ms. However the West Coast guys claim to be faster with a response of 60ms. Now a quick check says that light in fiber would take about 42ms to make the trip to the States and 8.5ms to Ireland. So obviously this is a single hop and does not include routers, switches, firewalls, protocol overhead etc. Would I be right to call BS on their figures? As a final note I tested a ping to Google IP address that was allegedly on the west coast from a site that covered a similar distance and was amazed to get a response time of 20ms. Suggesting ICMP packets that travel twice the speed of light. So A) what am I missing B) Am I right to suspect shenanigans? UPDATE: Guys thanks so far for your help and I have been reading various previous questions on this. About 5 years I had an issue where the hop from the UK to Ireland added 10ms of latency no matter what we did. In the end I moved the servers; So imagine my surprise when I have guys that claim they are 5ms faster with a transatlantic trip. So again should I call BS? Oh and assume both sites are normal mortals that don't have access to Google magical routing, warp dives or flux capacitors. :)

  Read the article

• Windows 7 - system error 5 problem

  - by ianhobson

  My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >