Search Results

Search found 7164 results on 287 pages for 'powerline networking'.

Page 123/287 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• Transparent proxy which preserves client mac address

  - by A G

  I have a customer that wants to intercept SSL traffic as it leaves their network. My proposed solution is to setup a proxy that is transparent and both layer 2 and layer 3 so it can simply be dropped into their network without any change in config required. The proxy has two NICs, one connected to the server, the other to the client. The client, proxy and gateway are under control of the customer, the server is not. For example: client --- Proxy --- gateway -|- server I have my proxy program configured with IP_TRANSPARENT socket option to it can respond to connections destined for a remote IP. I am using the following setup: iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY --on-port 3128 --tproxy-mark 1/1 iptables -t mangle -A PREROUTING -p tcp -j MARK --set-mark 1 ip rule add fwmark 1/1 table 1 ip route add local 0.0.0.0/0 dev lo table 1 The client in question is on its own subnet and has been configured so that the proxy is the default gateway. The result is: Client sends a frame to the proxy; source IP is client, source mac is client, destination IP is server, destination mac is proxy Proxy forwards this frame to the gateway; source IP is proxy, source mac is proxy, destination IP is server, destination mac is gateway Gateway forwards this to the server and gets a response back. Gateway sends reply back to proxy; source IP is server, source mac is gateway, destination IP is proxy, destination mac is proxy Proxy forwards this reply to client; source IP is server, source mac is proxy, destination IP is client, destination mac is client. The tproxy and iptables configuration lets the proxy send packets with a non local ip address. Is there a way to make something transparent at the mac address level? That is, put the client on the same subnet as the gateway. The gateway sees the source IP and mac as that of the client, even though they originated from the proxy. Could this be done by configuring the proxy as a bridge then use ebtables to escalate the traffic to be handled by iptables? When I use ebtables to push something up to iptables, it appears my proxy program doesn't respond to the packets as they are destined for the gateways's mac address, not the proxy's. What are some other potential avenues I could investigate? EDIT: When the client and gateway are on different subnets (and client has set the proxy as the gateway), it works as described in 1 to 5. But I want to know if it is possible to have the client and gateway on the same subnet and have the proxy fully transparent (ie client is not aware of the proxy). Thanks! EDIT 2: I can configure the proxy as a bridge using brctl, but cannot find a way to direct this traffic to my proxy program - asked here Possible for linux bridge to intercept traffic?. Currently, with the description numbered 1 to 5, it operates at layer 3; it is transparent on the client side (client thinks it is talking to the server's IP), but not on the gateway side (gateway is talking to the proxy's IP). What I want to find out is, is it possible to make this operate at layer 2, so it is fully transparent? What are the available options I should research? Thanks

  Read the article

• Using WDS to make a router act like a makeshift signal booster

  - by cornjuliox

  I've got a router that supports WDS, and I was wondering if I could use it to help extend the range of an existing wireless router? The PC I'm using right now is just barely within the signal range of a wireless router, and the signal is rather weak so I moved my wireless USB adapter away from the computer using a USB extension cord and used a pie tin + some packing tape + a stack of books and a tall wooden stand to make a sort of reflector dish. Sometime in the future I'd like other PCs to be able to connect wirelessly but with the way things are set up I can't move any farther from this spot or I lose the signal entirely. Can I use WDS to bridge the two networks together both to increase the range of the first network and allow computers connected to the 2nd router to share internet access?

  Read the article

• Windows Server 2008 Migration - Did I miss something?

  - by DevNULL

  I'm running in to a few complications in my migration process. My main role has been a Linux / Sun administrator for 15 yrs so Windows server 2008 environment is a bit new to me, but understandable. Here's our situation and reason for migrating... We have a group of developers that develop VERY low-level software in Visual C with some inline assembler. All the workstations were separate from each other which cased consistency problems with development libraries, versions, etc... Our goal was to throw them all on to a Windows domain were we can control workstation installations, hot fixes (which can cause enormous problems), software versions, etc... All Development Workstations are running Windows XP x32 (sp3) and x64 (sp2) I running in to user permission problems and I was wondering maybe I missed one, tWO or a handful of things during my deployment. Here is what I have currently done: Installed and Activated Windows Server 2008 Added Roles for DNS and Active Directory Configured DNS with WINS for netbios name usage Added developers to AD and mapped their shared folders to their profile Added roles for IIS7 and configured the developers SVN Installed MySQL Enterprise Edition for development usage Not having a firm understanding of Group Policy I haven't delved deeply in to that realm yet. Problems I'm encountering: 1. When I configure any XP workstations to logon our domain, once a user uses their new AD login, everything goes well, except they have very restrictive permissions. (Eg: If a user opens any existing file, they don't have write access, except in their documents folder.) Since these guys are working on low system level events, they need to r/w all files. All I'm looking to restrict in software installations. Am I correct to assume that I can use WSUS to maintain the domains hot fixes and updates pushed to the workstations? I need to map a centralized shared development drive upon the users login. This is open to EVERYONE. Right now I have the users folders mapped upon login through their AD profile. But how do I map a share if I've already defined one within their profile in AD? Any responses would be very grateful. Do I have to configure and define a group policy for the domain users? Can I use Volume Mirroring to mirror / sync two drives on two separate servers or should I just script a rsync or MS Synctool? The drives simply store nightly system images.

  Read the article

• "Piping" to MPD

  - by oxinabox.ucc.asn.au

  I would like to "Pipe" the output of my local sound card to MPD on a networked music server. Anyone have any suggestions how to go about this? I'm thinking maybe i can make a live MP3 stream? maybe over the web, or over the intranet? (IIRC MPD supported MP3 streams, i've had Internet radio steams going (though I didn't set them up) I'm not very experienced with MPD, or with webcasts

  Read the article

• management network to a network port for additional ones munin and monit

  - by paolo

  management network to a network port for additional ones munin and monit I want to build a separate Netzwek for server management. I have several network cards a linux / debian / ubuntu with computer. Set both network cards sin in the /etc/network/interfaces. # The primary network interface #allow-hotplug eth0 #iface eth0 inet dhcp auto eth0 iface eth0 inet static address 10.0.0.240 netmast 255.255.255.0 network 10.0.0.0 brodacast 10.0.0.255 gateway 10.0.0.254 auto eth1 iface eth1 inet static address 10.0.10.240 netmast 255.255.255.0 network 10.0.10.0 brodacast 10.0.10.255 post-up ip route add 10.0.0.0/24 dev eth0 src 10.0.0.240 table eth0-WAN post-up ip route add default via 10.0.0.254 table eth0-WAN post-up ip route add 10.0.10.0/24 dev eth1 src 10.0.10.240 table eth1-LAN post-up ip route add default via 10.0.10.200 table eth1-LAN post-up ip rule add from 10.0.0.240 table eth0-WAN post-up ip rule add from 10.0.10.240 table eth1-LAN still i adjusted / etc/iproute2/rt_tables and following routes set up in the /etc/network/interfaces I want to have both applications and the network interface separately as munin and monit only on eth1 and not have to eth0. it goes to the reboot but sometimes not always. # Traceroute-i eth1 10.0.10.200 not go what am I doing wrong?

  Read the article

• Windows 7, network shares, and authentication via local group instead of local user

  - by Donovan

  I have been doing some troubleshooting of my home network lately and have come to an odd conclusion that I was hoping to get some clarification on. I'm used to managing share permissions in a domain environment via groups instead of individual user accounts. I have a box at home running windows 7 ultimate and I decided to share some directories on that machine. I set it up to disallow guest access and require specifically granted permissions. (password moe?). Anyway, after a whole bunch of time i figured out that even though the shares I created were allowed via a local group i could not access them until i gave specific allowance to the intended user. I just didn't think i would have to do that. So here is the breakdown. Network is windows workgroup, not homegroup or nt domain PC_1 - win 7 ultimate - sharing in classic mode - user BOB - groups Admins PC_2 - win 7 starter - client - user BOB - groups admins PC_3 - win xp pro - client - user BOB - groups admins the share on PC_1 granted permission to only the local group administrators. local user BOB on PC_1 was a member of administrators. Both PC_2 and PC_3 could not browse the intended share on PC_1 because they were denied access. Also, no challenge was presented. They were simply denied. After adding BOB specifically to the intended share everything works just fine. Remember, its not an nt domain just a workgroup. But still, shouldn't i be able to manage share permissions via groups instead of individual user accounts? D.

  Read the article

• Get OWA and ActiveSync working on server using HTTP redirect in IIS 7

  - by eric

  We have two servers on our LAN. One is a Windows 2003 Server domain controller running Exchange 2003. The other is a stand-alone Windows 2008 server running IIS 7. Our company website runs on the IIS 7 (2008) server, so the firewall forwards port 80 to this. How can I get OWA and ActiveSync to work with this setup? And without using SSL. I have tried setting up a website on the IIS 7 box (mail.ourdomain.com) and using HTTP redirect to point to http://mailserver/exchange, but this doesn't work. Do we have to purchase an SSL certificate for this to work?

  Read the article

• Problems when trying to connect to a router wirelessly

  - by Ruud Lenders

  The situation - At my girlfriend's parents' place there are six Windows 7 devices that are wired or wireless connected to a router: 3 dekstops and 3 laptops. There are also several smartphones using the router. The router is secured with WPA2 (AES). The problem - We never had any problems with the router for over a year. But recently - about 3 weeks ago - my girlfriend's laptop (HP) and my laptop (ASUS) started to develop problems while trying to connect to the router. The router has stopped showing up from the network list. Sometimes it comes back and shows up, but then it keeps saying something along the lines of "Could not connect", and not long after that it dissapears again. The range of the router is not the problem here, because we experience the same when we sit next to the router. Sometimes, if we are lucky, and waited a long time (10-15 minutes) without using the laptop for anything, the laptop will eventually succesful connect to the router. The attempts - Of course, the Window 7 troubleshooter. We tried troubleshooting the connection problems and the wireless network adapter, but no luck. We also reset the router enough times to know that's not helping either. Here's the full list of things we tried, but did not help: Running the Windows 7 troubleshooter Resetting the router (more than once) Setting the router settings to factory defaults Disconnecting all other devices except one laptop Applying a system restore Trying static/dynamic IP/DNS - Dynamic is better, right? Enabling/disabling IPv6 - Should I keep IPv6 disabled? Running the command: netsh wlan stop hostednetwork Running the command: netsh wlan set hostednetwork mode=disallow Updating/reïnstalling wireless adapter drivers The tests - To help finding the core of the problem, we tested the following: Plugging an ethernet cable in the router and in our laptops - worked fine Connecting someone else's laptop to the router (wireless) - worked fine Connecting our laptops to someone else's router - worked fine The router - This information might be relevant: Router model: Sitecom 300N Wireless Router Router hardware: version 01 The DCHP Server's IPs range from 192.168.0.100 to 192.168.0.200. Router settings: Wireless channel: 12 Channel bandwidth: 20/40 MHz Extension channel: 8 Preamble type: Long 802.11g protection: Disabled UPnP: Enabled The laptops - If you are wondering about our laptops: My laptop model: ASUS Pro64JQ Girlfriend's laptop: HP Pavillion G6 OS: Both Windows 7 Professional x64 - with Service Pack 1 My wireless adapter: Atheros AR9285 AdHoc 11n: Enabled The question - Does anyone have experienced the same problems as I do? Or does someone know how to solve this? Are there more tricks I can try, or settings I should change? Note - Our laptops are not slow or old. My laptop is 1.5 years old, and the other laptop is just 5 months old. I know how to keep laptops clean and I'm pretty sure both laptops are not bloated with useless software.

  Read the article

• Vista laptop won't connect to airport extreme

  - by Hutch

  Our previous router died, and to replace it I procured an apple airport extreme. My mac, my wrt54gs (with ddwrt acting as a bridge) and a linux machine have had no problem connecting to the wireless. None of the wired clients are having a problem obviously. The problem is one of my roommates can not connect. That's not strictly true. He can connect to the network, and will, infact, get a dhcp lease. However he cannot get any packets out. Can't ping the router, can't access any web sites, nothing. However he's fine if we switch to an unsecured network. Which is obviously not acceptable. The airport only allows for 'wpa/wpa2 personal' and 'wpa2 personal' (and of course the enterprise versions there of) I keep reading about this problem in multiple spots on the web, but never see any actual answers... Anyway the laptop: hp/compaq cq50-215nr vista home premium wireess card: atheros 5007 airport is simultaneos dualband II

  Read the article

• Optimizing wireless router speed and minimizing interference.

  - by Tchalvak

  I've been experiencing problems with my wireless connectivity lately, and want to make sure that it's not related to the abundance of other wireless routers here in my building. So, what I'm looking for is a method (probably via some application or another) to audit the wireless channels (and other factors that might be important that I don't even know of yet) that are floating through the aether around me. Ubuntu or other linux apps are preferred, but some kind of windows/mac solution is possible, since I do have other OSes around me that I could install & test on. Router: netgear WGT624 v3 Hearsay tells me that channels 1, 6, and 11 are "non-overlapping" (I expect they aren't used for non-wireless-router purposes or something, not sure how they couldn't overlap with other routers using other channels), so perhaps my best choices of channel are limited, so if channels aren't really a big concern, I'd be happy to get links to other optimizations that I should look into.

  Read the article

• Can't access certain specific IP/domain on Windows 7

  - by jfrobishow

  Been banging my head on the wall for some time now. I have a fresh install of Windows 7 - Ultimate ~x86. Some IPs can't resolve properly, it doesn't matter if I try using Firefox, Chrome or IE I end up with a domain not found (server not found, etc.) I am behind a router, all the other computers aren't affected only this Win 7 machine. It's only certain sites. e.g. xkcd.com, facebook's cdn, google group. Things I have tried: flushdns ipconfig renew Disable IP v6 on the NIC Double checked that the computer was in the right timezone @ the right time. Reinstall the NIC driver. Again 90% of the sites will work but not the major one :P help!!!

  Read the article

• Network card very slow, only on Windows

  - by J Penguin

  This only happens to 1 of my machine, and only when booting into Windows 7. No matter what network card I put in, Windows would default its mode to 10Mbps full duplex. Transfer speed is approximately 1 MB/s. If I set it to 100Mbps, the transfer drops to 100-200K/s. If I set it to 1000Mbps, the connection is lost completely. I've tried swapping in different cards, both PCI-E and PCI. I'v etried update the windows, I've tried reinstalling the drivers... On this very same machine, if I boot into Fedora, it can use the card at its full capacity 1000Mbps transfering 80+ MB/s And all the cards work just fine when plugging into other machines on the same network. I'm very curious. What could be the reason for this? The only different software that this machine has is virtual box with a VPN emulator, but disabling that VPN doesn't seem to do anything. I would like to get this fixed, hopefully, without reinstalling windows _< Will that be possible?

  Read the article

• Anyone interested in obtaining a cable list from a visio Diagram? [closed]

  - by Alex

  it's my first post here. Just wondering if anyone had to deal with the following problem - you have to install over say a 100 network elements and servers - cabling is done via contractors, so you need to provide them with an accurate, error-free cable list - your inputs are a set of detailed, port by port, visio diagrams. Prb is to obtain the cable list and get the cabling started while you're busy crafting the switch/routers configs. I coded a Visio plugin, which I plan to release under the GNU license, that returns a cable list from a diagram, and tested it on intermediate size infrastructure, 2K+ cables. It works well. The tool needs a little work to be user friendly, so before getting started, I wanted to know if that was worth the effort. Questions are welcomed, let me know -A PS: the tool is targeted for those who need a port by port description of their network, in the form Source/slot/port/Destination/slot/port.

  Read the article

• Right Clicking Network File Very Slow Over VPN

  - by Reafidy

  I am having real troubles with a VPN connection. The VPN connection is not used for a internet connection just for file browsing. File browsing is slow, taking about 3-4 seconds to bring up a list of folders. I can live with this, however the problem is when I right click on a file. Sometimes the right click menu comes up instantly but sometimes it brings up the wait icon for anywhere between 30 seconds to a few minutes before displaying the menu. I ran speedtest.net and the results were: 3.08 Down/0.13 Up (Mbps) 0.13Mbps = 16kbps upload. So I am not experiencing miracles with opening files. A 120kb file can take anywhere from 5 to 30 seconds. Sometimes transfering/opening files happens as expected other times its slow but the real issue is with the right click as mentioned. Anyone have any ideas? Using PPTP Clients are all windows 7 pro

  Read the article

• Network use of Gaming PC

  - by Matthew Patrick Cashatt

  Background After YEARS of waiting, I built the custom gaming PC of my dreams: Intel i7 - 975 Extreme Edition 3.3ghz (overclocked to 4.0) ATI Radeon 5970 2gb Corsair 256 gb SSD Drive 2 TB Sata II 3.0 7200rpm data drive 12 GB Kingston Hyper-X (1600mhz) DDR3 Windows 7 Ultra 64 bit And so on. . . Problem I hooked this beast up to our home theater and settled in for a great gaming season only to realize a couple of drawbacks: It's hard to accurately wax bad guys using a keyboard in your lap whilst reclined on your couch (and using a wireless keyboard). It's hard to read the text on the screen (i.e. menus, etc). I find that a 1:1 ratio (screen diagonal inch to inch away from screen) is optimum, but using the home theater, it's more like 1:3 which has me squinting unless I sit on the coffee table. The wife always seems to want the TV the same time I do and, unfortunately "Real Housewives of Beverly Hills" and Battlefield BC don't mix. I am losing the battle in the home theater room, but the PC has to stay there (long story). So, this leaves me with the option of playing in my home office which is about 30 feet away from the home theater. I am a software developer so I have a pretty decent set up in my office--multiple 1080p monitors, HP Envy 17 which can run games like Crysis in 720p with out stammering too much. Also, I can game very comfortably at my desk in the office. Still, even though the set up in my office can run games well enough, I don't want to regress to that when I have worked YEARS for an awesome gaming PC that can run everything on ultra high settings. My Question What are my options for running my games on the beastly desktop in the Home Theater, but physically playing in my office about 30 feet away? A really long HDMI cable? LAN/RDC? Details that May Help We have an open crawlspace so running cable from HT room to office is no problem. I already have networked the house with a LAN Any help is GREATLY appreciated. Thanks, Matt

  Read the article

• Netbook (Samsung N220) on Ubuntu 10.04 slows down WiFi for other computers

  - by Joachim

  I encountered a really odd problem with my new netbook. I am running Ubuntu 10.04 on a Samsung N220 Mito. So far everything worked fine. Now I tried the machine for the first time in our work group where we have a wifi (with internet access) for all laptops. The wifi is controlled by a computer running Suse 9.3 which provides a DHCP server and imposes a firewall. At the moment there is only a macbook in the wifi, where no problems with the internet or wifi connection are encountered. Now coming to my actual problem: In addition to the macbook i connect the Samsung N220 to the Wifi. Problem: My download speed is for some reason limited to 70KB/s max. This is neither a limitation of the server/website i browse on, nor a configuration of the netbook: at home i have 500KB/s download speeds. Furthermore, it is not a default limitation for "untrusted" or "new machines" in the wifi, as for instance other new laptops get full speed internet with our wifi. Problem: Once the Samsung N220 is generating traffic in the wifi, the wifi is slowed down dramatically for all other machines: I run a ping to the router from the macbook. The ping times with the N220 ideling are 2-6ms. When I start downloading or browsing in the web with the N220 the ping speed drops to 800ms. Vice versa, when the macbook is generating the traffic the ping of the N220 to the rooter stays constant at around 2-6ms. So clearly, it is some problem originating from my netbook or maybe its treatment in the wifi. Thanks for any help

  Read the article

• GNS3 Cannot ping/resolve DNS record

  - by Eldad Cohen

  I set up an internet lab with GNS3, which has 3 routers, in each node there is a computer directly connected. One of the hosts is a DNS server, Windows 2003 Server. The other one is a Windows XP machine. Ping is good between routers and machines but no ability to ping domain.com record on DNS server 2003. I set a static nat on the router to route all traffic from gateway to the DNS server internal ip address, still no answer for the dns request. Any ideas or thoughts will be most welcome.

  Read the article

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• Ubuntu Wireless card not found

  - by user32121

  Hello all, I'm trying to setup Ubuntu on an old PC. I ran the following command, lspci, in order to get info on the wireless card installed. 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03) Does anyone know where I can get drivers for this card/chip? And also, how to install (I'm rather new to linux). Also, I'm sure the card is working because I just formatted over xp, and everything was working well. Thanks in advanced!

  Read the article

• How do I wire a crossover cable to connect two devices together?

  - by Axxmasterr

  I need to make a ethernet crossover cable to connect two devices together. Anyone know the process to make one from scratch?

  Read the article

• postfix configuration

  - by kibs

  failed to start the postfix service output given was postfix: fatal: config variable inet_interfaces: host not found: all

  Read the article

• Should I upgrade my LinkSys WRT54GL firmware?

  - by Reid

  I have a LinkSys WRT54GL v1.1 which currently has stock firmware version 4.30.7. I see that version 4.30.14 is available. The router works fine now, and the release notes look uninteresting except for one line in v4.30.9: "Resolves issue with Linux kernel vulnerability". I have remote management turned off. I'm aware of the 3rd-party firmwares but the stock firmware works fine for me at the moment, so I don't have an interest in those. Is the status quo fine or should I upgrade the firmware? (It's a bit of a pain since the config has to be saved and reloaded, and obviously any mucking with firmware is risky.)

  Read the article

• Wireless connection switches off IP address

  - by Sanjay Gupta

  I have a Lenovo laptop with windows XP and a wireless connection at home. The wireless connection works when initially I switch on the computer. but if I leave it for even 5 minutes, the wireless is gone. Then I have to shut it off and start computer all over again, waiting for 5 minutes. Even if the wireless speed is 48Mbps or better, it gives the message "Renewing IP address" and gets stuck there not moving to the next stage. Other laptop in the household works fine and can be left on. Why does this happen ? I suspect that IP address is the problem and somehow is not registered in all the necessary files.

  Read the article

• Basic questions about network topologies

  - by laoshanlung

  I have just started learning about network topologies, but there are a lot of confusion about different types of network topologies i have learnt so far. First of all, BUS topology. If i have like 100 PCs in the same wire connected using BUS topology, and the network connection speed is 100Mbps, then each PC will have a connection of 1Mbps, right ? With the same scenario, if i connect those 100 PCs using STAR topology, then each PC will have a connection of 100Mbps ? Then with the TREE topology, i divide the system into 10 sub-system (10 tree branches) , each branch has 10 PCs, then i will have other 10 small "BUS-topology" networks each one will have a connection of 10Mbps and therefore each PC will also have 10Mbps ? And the last one is RING topology, 100 PCs, each PC will have 100Mbps connection ?

  Read the article

• How to fill in the network line in the ubuntu interfaces config file?

  - by matnagel

  I have to configure an ubuntu hardy server network interface. The service hoster told me that this is the network data for the machine: IP Range: 111.111.200.74 to 111.111.200.78 Netmask: 255.255.255.248 Broadcast: 111.111.200.79 Gateway: 111.111.200.73 Subnet: 111.111.200.72/29 I am only using the first IP address. I will update the /etc/hosts file with 111.111.200.74, but I am still unsure how the /etc/network/interfaces file should be. This is my plan: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 111.111.200.74 netmask 255.255.255.248 network 111.111.200.??? broadcast 111.111.200.79 gateway 111.111.200.73 As you can see I don't know how to build the network line. How would I calculate the data for the network line and what is the result? (I changed the first 2 octets of the subnet, they are not "111.111" in the real setup.)

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >