Search Results

Search found 4960 results on 199 pages for 'onion architecture'.

Page 128/199 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

• Does Windows 7 support multiple simultaneous nVidia graphics cards with different drivers?

  - by mckenzieg1

  On one of my dev machines at work (currently running XP), I have two nVidia graphics cards: Quadro NVS 440 (my original card, for my three primary monitors) GeForce GTX 275 (just added, for CUDA development) I can get both cards to work OK by installing the latest GeForce drivers, but I get some annoying-but-not-crippling display artifacts on the Quadro's screens (mostly scattered black rectanges where repainting fails for a few bits of UI in certain applications). Under XP, this seems to be the best I can do. I can use Device Manager to supposedly install different nVidia drivers for the two cards (the latest Quadro drivers for the NVS, the latest GeForce drivers for the GTX), but I actually end up with the same driver for both, because the driver dlls all have the same names and get installed on top of one another in the system directory. I have read that Win7 has a new video driver architecture that better supports multiple heterogeneous cards. Does anyone know if that will handle my scenario? If so, it will give me a compelling reason to get that machine on Win7 ASAP.

  Read the article

• Printer Brother DCP-110C Linux 64-bit drivers

  - by Ondra Žižka

  Hi, I need 64-bit Linux driver for DCP-110C (for Ubuntu 10.04 64-bit) I found only 32-bit here. http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/index.html I've tried to follow those instructions. During the installation, I got this: ondra@ondra-doma:~/Downloads$ sudo dpkg -i --force-all dcp110clpr-1.0.2-1.i386.deb dpkg: warning: overriding problem because --force enabled: package architecture (i386) does not match system (amd64) (Reading database ... 257283 files and directories currently installed.) Preparing to replace dcp110clpr 1.0.2-1 (using dcp110clpr-1.0.2-1.i386.deb) ... Unpacking replacement dcp110clpr ... Setting up dcp110clpr (1.0.2-1) ... ln: creating symbolic link `/usr/lib/libbrcompij2.so.1.0': File exists ln: creating symbolic link `/usr/lib/libbrcompij2.so.1': File exists ln: creating symbolic link `/usr/lib/libbrcompij2.so': File exists After installation, the printer is listed at the cups server, but does not work (no command has any effect on printer (which is, of course, on and connected)). Anyone has found some working solution? Thanks, Ondra

  Read the article

• Shared block device file system (cluster file system without networking)

  - by fungs

  Is there any file system that can be mounted multiple times and supports concurrent file access for Linux? Basically I want something like a cluster file system but without the need to have a running network for a distributed lock manager. That can be very handy in connection with virtual machines that can share data with the host or another VM without the need to create a network link. This I want to avoid to keep the network architecture secure (virtual machine in DMZ) but share large files. No need to scale it up, just two machines that mount the same block device. Shouldn't it be possible to have file locking information right on the disk?

  Read the article

• What are performance limits of a database?

  - by Tommy

  What are some rough performance limits (read/s, write/s) for a single database server (no master-slave architecture), assuming storage on disk? How many read/s, write/s, depending on the kind of disk? (SSD vs non-SSD) , assuming simple operations (select one row by primary key, update one row, correctly indexed). I assume this limit is dependent on disk seek/write. EDIT: My question is more about getting rough metrics of the number of operations a database supports: to be able to know for example, if a new feature triggering 300 inserts/s can be supported without scaling out with additional servers.

  Read the article

• Test site speed

  - by Elad Lachmi

  I am test driving an Akmai CDN architecture and before committing to buy, I would like to gauge the real performance gain from the acceleration feature. What would be the best MO for doing speed tests from different locations around the world? I would like to test the page load speed and not just the server response time. I would like to test speed from as many edge locations as possible. I do not mind a paid service as well, if it is optimal. Thank you!

  Read the article

• Solaris TCP/IP performance tuning

  - by Andy Faibishenko

  I am trying to tune a high message traffic system running on Solaris. The architecture is a large number (600) of clients which connect via TCP to a big Solaris server and then send/receive relatively small messages (.5 to 1K payload) at high rates. The goal is to minimize the latency of each message processed. I suspect that the TCP stack of the server is getting overwhelmed by all the traffic. What are some commands/metrics that I can use to confirm this, and in case this is true, what is the best way to alleviate this bottleneck? PS I posted this on StackOverflow originally. One person suggested snoop and dtrace. dtrace seems pretty general - are there any additional pointers on how to use it to diagnose TCP issues?

  Read the article

• Munin Aggregate Graphs from several servers

  - by Sparsh Gupta

  I am using DNS round robin load balancing and have divided my total traffic onto multiple servers. Each server does around 300-400req/second but I am interested in having an aggregate graph telling me the TOTAL of all requests per second served by our architecture. Is there any way I can do this. Right now each graph in Munin comes as a separate graph as they depict things on one server. I am using configuration as follow which doesn't work doesnt work for me, does this configuration got errors? [TRAFFIC.AGGREGATED] update no requests.graph_title nGinx requests requests.graph_vlabel nGinx requests per second requests.draw LINE2 requests.graph_args --base 1000 requests.graph_category nginx requests.label req/sec requests.type DERIVE requests.min 0 requests.graph_order output requests.output.sum \ lb1.visualwebsiteoptimizer.com:nginx_request_lb1.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb2.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb3.visualwebsiteoptimizer.com_request.request

  Read the article

• Windows 2008, 2 NICS, routing problem

  - by Srodriguez

  Dear all, I've some questions regarding basic routing, can't seem to relate to other questions posted in this site. My architecture: Windows 2008 server with 2 nics in the server. NIC1: IP 10.198.6.xxx, submask 255.255.252.0, gateway 10.198.4.xxx NIC2: IP 192.168.168.xxx, submask 255.255.255, no gateway defined both NICS are just connected to two separate switches, with other computers. I want to be able that all the requests that have a destination of 192.168.168.xxx are redirected to the NIC2, all the other to the NIC1. I know it's possible to do it with the route command, but normally we have to specify a gateway? (route ADD 192.168.168.0 MASK 255.255.255.0 ???) How can this be archived? Thanks a lot for your help!

  Read the article

• How to connect a wifi router to a cable modem router?

  - by DavidD

  Here's the thing: I have a cable modem router (Thomson TCW710) with wifi-g that I rent from my cable company. I would like to use a wireless-n router (D-Link DIR-655, that I received for free) with it in order to take advantage of the faster wifi. I basically need advice on how to architecture my home network with these two beasts. What configuration should I need to apply on my old and new router to make it all work? The two routers will of course be connected together with a RJ-45 cable.

  Read the article

• Amazon EC2- many micro-instances vs single small/medium instance

  - by shashankaholic

  I have a chat application using stack of Openfire, Tomcat6 and MySQL. Currently, i have installed all these servers on single Linux micro-instance(613 MB memory). Even in low user base 10-20 i am encountering CPU overload which is quite obvious here. As, i am new to Amazon EC2 can somebody suggest me how to scale up my architecture according to traffic use? should i use separate micro instances for every app server(openfire,mysql,tomcat6) should i use single small or medium instance for whole server stack. Some factors in context: high reliance on MYSQL high memory usage due to file transfer web-application interacting with other Amazon service like S3,SES

  Read the article

• Computer won't reboot without waiting for a while

  - by Benjamin

  I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

  Read the article

• Double Click to open Office docs is slow, File -> Open is fast.

  - by Keith

  I have 2 unique networks. They both share similar architecture: Windows 2003 SBS SP2 Running Symantec Endpoint Running Symantec Information Foundation Shared drives off a data partition Clients running Office 2003 or 2007 Connect to file server through mapped drives When users try to open a file from their local PC by double clicking, it will take 30-60 seconds to open. When they do File - Open, those same documents open up almost immediately. So far I've tried the following - CCleaner to parse the registry of outdated mapped drives - Disabled "using DDE" - Disabled A/V - Reboot Any ideas beyond that? Figured this question belongs here instead of SU since its the same issue on different networks.

  Read the article

• Bound external Cisco CIGESM ports to a specific BladeServer

  - by Vinícius Ferrão

  We have an IBM BladeCenter with 14 blade servers and one external Cisco CIGESM for Ethernet connectivity. Since this hardware is a little old, we will use it for other services, and we want to run a pfSense instance on one of the blades. It's just an Firewall Appliance, but it needs two network interfaces: one for the WAN and the other one for LAN access. Our architecture works on top of static routes, we don't use NAT, so we got the WAN IP in one interface routing to the another one. The main problem is how to plug the WAN cable in one of the four external ports and make it exclusive to the blade server containing the firewall. And we also need an exit port that goes through a 3COM 4200G switch that makes the internal routing and VLAN separation. Thanks in advance

  Read the article

• Amazon EC2- micro-instance vs single small/medium instance

  - by shashankaholic

  I have a chat application using stack of Openfire, Tomcat6 and MySQL. Currently, i have installed all these servers on single Linux micro-instance(613 MB memory). Even in low user base 10-20 i am encountering CPU overload which is quite obvious here. As, i am new to Amazon EC2 can somebody suggest me how to scale up my architecture according to traffic use? should i use separate micro instances for every app server(openfire,mysql,tomcat6) should i use single small or medium instance for whole server stack. Some factors in context: high reliance on MYSQL high memory usage due to file transfer web-application interacting with other Amazon service like S3,SES

  Read the article

• Behaviour of nginx as proxy

  - by HD

  I'm testing nginx with different configurations to replace an architecture working with squid + apache. I know that I can use nginx to manage static requests and load balancing but I'm interested in one particular solution that I don't understand clearly: I'm using 2 nginx servers (balanced) with the proxy_pass setting to pass all requests to an apache server. When one client makes a request to the site one of the nginx servers process it and send it to the apache server. Now, how this behaviour could be an improvement to my system?, it seems that all requests are passing through apache and I don't see benefit at all. What happens when 100 simultaneous connections pass through nginx? The 100 connections will be going to the apache server or is some kind of internal behaviour that allows an small impact into apache?

  Read the article

• Load balancing + NAT issue on BNT GBE 2-7 gear

  - by Clément Game

  Hi guys, I've got troubles configuring an Hardware load-Balancer with NAT functions. I have the following architecture: Internet === VIP (public) LB (private ip) ==== private addressed servers When a connection is initialised from the outside (internet) , the LB correctly forwards the SYN packet to one of the private servers. But when these servers want to reply with a SYN/ACK there is a problem. the initial SYN packet had as ip header : VIP = Private_server_Address But the private servers cannot reach VIP from their side (this is normal since it's nated), and then provide a correct reply. Have you guys any solution to correctly forward the packets to their correct destination ? Note: The load balancer, which is the default gw for the servers, also has a NAT rule for "masquerading" (actually more SNAT than real masquerading) Regards, Clément.

  Read the article

• Installing additional printer drivers (x86) on Windows 7 (x64)

  - by ambrax

  I've successfully installed Windows 7 (x64) and drivers for my Canon MP510, and have no problem printing with this setup. There is another PC in the network running XP SP3, and I want to share the printer so that users of that PC can also print. On W7 I have the option of installing additional printer drivers for other system architectures (Itanium and x86). I've downloaded the most current 32-bit drivers for the printer, but every time I direct the install dialog to the folder containing the drivers, I get the following error message: Selected printer driver not found The specified location does not contain the driver Canon Inkjet MP510 Printer for the requested processor architecture. Retry Cancel I'm stumped. I'm absolutely certain that the specified location actually does contain the correct drivers; I've even installed them on the XP system. I've tried everything I can think of. What am I overlooking?

  Read the article

• Strange issue with 64 bit OS

  - by Sherwin Flight

  So I own two versions of Windows 7, one is 32 bit, the other is 64. The 64 bit version came with my new desktop, and the 32 bit version came with my Laptop. I was doing a clean install of my laptop, and the install went smooth, Windows is up and running! However, after installing it I realized that I accidentally used the 64 bit installation disk instead of the 32 bit version. I confirmed this in the System Information screen, it says: System type: 64-bit Operating System As far as I knew this laptop was only a 32 bit machine. My understanding is that a 64 bit OS would NOT run on 32 bit architecture. Am I correct with this assumption? If this was a 32 bit laptop is there any way a 64 bit OS would even run at all on it?

  Read the article

• Homebrew build with different arch?

  - by StasM

  I tried to install mysql-connector-c recipe via homebrew, and it builds just fine, but produces x86_64 library: $file ~/brew/lib/libmysql.dylib .../brew/lib/libmysql.dylib: Mach-O 64-bit dynamically linked shared library x86_64 I however need i386 library for my project. I tried to give it CFLAGS and LDFLAGS like this: CFLAGS="-arch i386 -arch x86_64" LDFLAGS="-arch i386 -arch x86_64" brew install mysql-connector-c but nothing changes - it still builds x86_64 only binary. Is there any way to make homebrew build either dual arch library or i386 library? I have kernel architecture set to x86_64, if it matters.

  Read the article

• Installing Java 1.5 on Ubuntu?

  - by StackedCrooked

  I already have Java 1.6, but I need to test something with 1.5. I have downloaded the .bin file from http://java.sun.com/javase/downloads/index_jdk5.jsp using the Sun Download Manager. Now I want to create a deb file from this bin file: $ fakeroot make-jpkg java_ee_sdk-5_01-linux.bin Creating temporary directory: /tmp/make-jpkg.Zpm1Y7LbZ0 Loading plugins: blackdown-j2re.sh blackdown-j2sdk.sh common.sh ibm-j2re.sh ibm-j2sdk.sh j2re.sh j2sdk-doc.sh j2sdk.sh j2se.sh sun-j2re.sh sun-j2sdk-doc.sh sun-j2sdk.sh Detected Debian build architecture: i386 Detected Debian GNU type: i486-linux-gnu No matching plugin was found. Removing temporary directory: done How can I fix the "No matching plugin was found." error? Update I downloaded jdk-1_5_0_22-linux-amd64.bin from the archive page and ran Linux installer. It works fine.

  Read the article

• How to disable 3G USB Modem internal storage from being loaded by linux kernel?

  - by Krystian

  Hi, I've got a problem with my 3G modem [Huawei E122]. It has internal storage and kernel assigns a device [/dev/sdX] to it. Because of that, every second time my machine will not boot - kernel panic - as my usb hdd gets assigned /dev/sdb instead of /dev/sda. I cannot use LABEL nor UUID in root= kernel parameter, as it is only available when using initrd, and I can't use it - I am using Debian on my router - mips architecture machine. I have to prevent this from happening, as my router has to start everyday and I have to be sure it works ok. I don't have physical access to restart it when something goes wrong. I don't use my modem internal storage, there's no SD card inserted. However kernel detects the reader and loads it. I can not prevent loading od usb drivers since my hdd is on USB as well. I will appreciate any ideas.

  Read the article

• Connecting office to data center via Metro-ethernet

  - by Eric

  I am installing a metro ethernet link from my office to my data center. The office will have a cisco 3750 with several vlans. The data center end will have a more complicated set up. The metro e from the office will connect to a 2960, which will have two other 2960s with a few vlans and a 2811 router connected to it for connectivity to our other environments and the internet. I am looking at implementing this by connecting the office 3750 and the data center 2960 with a dot1q trunk and doing all routing at the 2811. I will configure subinterfaces for gateways for each of the vlans on the 2811. I work for a small company and don't have much of a budget for an ideal architecture. I can post a simple diagram if needed for clarification. Is there anything I am missing here? I feel like I am forgetting something very basic and want to make sure I eliminate any boneheaded mistakes.

  Read the article

• configuring nginx as reverse proxy

  - by user55714

  This isn't directly passenger related..but I am hoping some of you might have tried this for sure so why not ask. I am using passenger with nginx to serve my rails app on a virtual slice host. I am considering putting a reverse proxy for serving static content as well as handling etagged actions. 1 - Can I use my existing nginx installation and just change it to a reverse proxy? Do I even need a web server? What would a typical architecture look like in this case? nginx rev-proxy - nginx web server - passenger? or nginx rev-proxy - passenger? 2 - Is nginx the best choice in this case? 3 - Can my reverse proxy reside on the same slice? Thanks

  Read the article

• How to handle knowledge handover effectively?

  - by Zizzencs

  Let's say a large enterprise opens a new office in (insert random location here) and want the new colleges up to speed as fast as possible. Let's also say this enterprise is a very typical one with a complex environment, lots of history and almost full lack of documentation. What's already been decided is that the new colleges will receive howto-style documentation for the most typical tasks and will get seme architecture documentation for some of the more complicated systems. Any ideas about improving this process? And more specifically, how should such a howto document look like to be helpful?

  Read the article

• tcp handshake failed.client send rst (after syn-ack). can any one advice?

  - by user1495181

  architecture: 2 linux computer connected . on the second (192.168.1.1) one run apache server . I have a small program that take tcp packets from nfqueue change the dst ip to 192.168.1.1 in case that the dst ip is 192.168.1.2 (i know that i can do it with iptables , but my program will do more things in the future), fix check sum and return to the queue. if i call to telnet 192.168.1.1 , means that my program dosnt need to do any manipulation, handshake is OK. If i call to telnet 192.168.1.2 , my program change the dest. server get the syn and return syn-ack, but right after getting the syn-ack the client send rst. Can anyone advice? wireshark of the telnet tcpdump of the telenet above

  Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >