Search Results

Search found 38328 results on 1534 pages for 'write xml'.

Page 128/1534 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

• Flash Backed Write Cache (FBWC) without capacitor pack

  - by Martyn

  I brought a HP Smart Array P410 controller and it is installed and working fine in a HP Prolient Microserver with 4 drives in two RAID 1 arrays. I didn’t realise however that it came without any cache so would only work by directly writing straight to the disk, and the performance was horrible. So I then brought the 512MB Flash Backed Write Cache (FBWC) memory module as I was under the impression that with FBWC I would not need a battery. I got this idea from a forum post. "What do you guys think of the choice between 'BBWC' (battery backed write cache) and 'FBWC' (flash backed write cache)? The flashed based ones use non-volitile memory so need no battery." After installing the cache module however the server pretty much won’t boot. The P410 has a flashing amber light on it, and from the manual that doesn’t sound good. I’ve managed to get to the on board BIOS once and even managed to get to boot to the HP Array Configuration Utility (ACU) CD once, but every other time the Server continuingly reboots once it get to the POST screen and reads ARRAY INITILIZING %%%. The one time I reached the ACU, it reported a problem with the Cache Module. To me, it seems like the cache module is faulty, however the supplier tells me “Do you have an FBWC battery pack, p/n 587324-001, because that is required for the cache to work. If you have it, please complete an RMA form and we'll send a replacement / credit.” Does this sound right to you? I’ve been ordering the parts from the US and I don’t want to spend $77 + $40 p&p on a battery, wait a week for the shipping to find the card is faulty, and I don’t want to send back a working card?

  Read the article

• Running .NET code in XML file [closed]

  - by Stuart McIntosh

  We have 2 servers, 1 already configured with .net which works fine and a new one which appears to be configured the same but when I open an xml page in Internet Explorer it complains about the <% tag. We have IIS on win srvr 2003 SP2. The website is configured with .NET 1.1.4322. In ISAPI extensions have set the .XML extension to use c:\windows\microsoft.net\framework\v1.1.4322\aspnet_isapi.dll But the page: <property name="documentmaxage" value="0"/> <property name="documentmaxstale" value="0"/> <var name="m_Prompt_Path" /> <form id="InitVoiceXmlDoc"> <block> <assign name="m_Prompt_Path" expr="&quot;<% Response.Write(Request.QueryString["m_Prompt_Path"]); %>&quot;"/> </block> </form> gives the error: The XML page cannot be displayed Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later. The character '<' cannot be used in an attribute value. Error processing resource 'http://localhost:11119/fails.xml'. Lin... &quo... We have the same config on another server which works fine. So are there other options apart from the ISAPI extensions that I need to look at

  Read the article

• IIS7.5 - about app pool ID's and folder read/write access

  - by merk

  I did some searching and it looks like for each app pool, there should be an account created called IIS APPPOOL\AppPoolName - however i can see no such account when i try to modify the permissions on a folder to give that app write access. The closest I have found is the IIS_IUSRS group. Now, if i go into that group and look at the members, i see several IIS APPPOOL\PoolName members. But where are these members coming from? Why don't they show up under the users? And why can't i add a specific one to a folder? It doesn't make sense to me to add the IIS_IUSRS group to a folder since they gives every site access to the folder. To be more specific, I'm setting up wordpress and it unfortunately wants write access to the root folder. So i want to restrict it as much a possible. I was trying to figure out how to set it so that the WP root folder has write access only for the ID that the blog's app pool is running under. When i drill down into the IIS_IUSRS group, i do not see the app pool for the blog listed there. The settings for the blog's app pool are: No managed code, Classic, ApplicationPoolIdentity, and it's named 'blog' So any explanations regarding these users that are created for the app pools, and why the blog doesn't seem to belong to the iusrs group? thanks

  Read the article

• How to write rules for persistent net names?

  - by ndemou

  I know that a process generates persistent network card names based on rules found in /lib/udev/rules.d/75-persistent-net-generator.rules. I also know how to completely disable this process with a simple echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules but I've read that I "could also write my own rules file to give the interface a name — the persistent rules generator ignores the interface if a name has already been set" (/etc/udev/rules.d/README confirms that this is possible). Do you have any pointers to documentation about how to write such rules? (I mostly care about Debian/Ubuntu and a bit less for CentOS) As a specific example of why I want to write custom rules: I have two identical servers with one onboard LAN and one PCI LAN. In case of HW failure I want to be able to move disks from HW#1 to HW#2 and it's important for eth0 to continue pointing to the onboard card and eth1 to the PCI card (no one wants to mess with cabling in the middle of a HW failure panic). My current workaround works but is a lot of work[1] so I wonder if writing custom rules would allow me to express something simple like this: cards with MAC A or B should be named eth0 cards with MAC C or D should be named eth1 follow default naming scheme for anything else [1] install the OS in HW#1 and keep a copy of /etc/udev/rules.d/70-persistent-net.rules. Move the disks to HW#2 and keep a second copy of the same file. Concatenate the two copies and manually edit the NAME="ethX" part. Replace /etc/udev/rules.d/70-persistent-net.rules with my version. Finally disable auto-creation of a new 70-persistent-net.rules using echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules

  Read the article

• Write once, read many (WORM) using Linux file system

  - by phil_ayres

  I have a requirement to write files to a Linux file system that can not be subsequently overwritten, appended to, updated in any way, or deleted. Not by a sudo-er, root, or anybody. I am attempting to meet the requirements of the financial services regulations for recordkeeping, FINRA 17A-4, which basically requires that electronic documents are written to WORM (write once, read many) devices. I would very much like to avoid having to use DVDs or expensive EMC Centera devices. Is there a Linux file system, or can SELinux support the requirement for files to be made complete immutable immediately (or at least soon) after write? Or is anybody aware of a way I could enforce this on an existing file system using Linux permissions, etc? I understand that I can set readonly permissions, and the immutable attribute. But of course I expect that a root user would be able to unset those. I considered storing data to small volumes that are unmounted and then remounted read-only, but then I think that root could still unmount and remount as writable again. I'm looking for any smart ideas, and worst case scenario I'm willing to do a little coding to 'enhance' an existing file system to provide this. Assuming there is a file system that is a good starting point. And put in place a carefully configured Linux server to act as this type of network storage device, doing nothing else. After all of that, encryption on the files would be useful too!

  Read the article

• How to tell Java SAX Parser to ignore invalid character references?

  - by Epaga

  When trying to parse incorrect XML with a character reference such as &#x1, Java's SAX Parser dies a horrible death with a fatal error such as org.xml.sax.SAXParseException: Character reference "&#x1" is an invalid XML character. Is there any way around this? Will I have to clean up the XML file before I hand it off to the SAX Parser? If so, is there an elegant way of going about this?

  Read the article

• Serializing Class Derived from Generic Collection yet Deserializing the Generic Collection

  - by Stacey

  I have a Repository Class with the following method... public T Single<T>(Predicate<T> expression) { using (var list = (Models.Collectable<T>)System.Xml.Serializer.Deserialize(typeof(Models.Collectable<T>), FileName)) { return list.Find(expression); } } Where Collectable is defined.. [Serializable] public class Collectable<T> : List<T>, IDisposable { public Collectable() { } public void Dispose() { } } And an Item that uses it is defined.. [Serializable] [System.Xml.Serialization.XmlRoot("Titles")] public partial class Titles : Collectable<Title> { } The problem is when I call the method, it expects "Collectable" to be the XmlRoot, but the XmlRoot is "Titles" (all of object Title). I have several classes that are collected in .xml files like this, but it seems pointless to rewrite the basic methods for loading each up when the generic accessors do it - but how can I enforce the proper root name for each file without hard coding methods for each one? The [System.Xml.Serialization.XmlRoot] seems to be ignored. When called like this... var titles = Repository.List<Models.Title>(); I get the exception <Titlesxmlns=''> was not expected. The XML is formatted such as. .. <?xml version="1.0" encoding="utf-16"?> <Titles xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Title> <Id>442daf7d-193c-4da8-be0b-417cec9dc1c5</Id> </Title> </Titles> Here is the deserialization code. public static T Deserialize<T>(String xmlString) { System.Xml.Serialization.XmlSerializer XmlFormatSerializer = new System.Xml.Serialization.XmlSerializer(typeof(T)); StreamReader XmlStringReader = new StreamReader(xmlString); //XmlTextReader XmlFormatReader = new XmlTextReader(XmlStringReader); try { return (T)XmlFormatSerializer.Deserialize(XmlStringReader); } catch (Exception e) { throw e; } finally { XmlStringReader.Close(); } }

  Read the article

• jQuery - xpath find?

  - by Steve

  If you have the xml below in $(xml), you would get droopy using: $(xml).find("animal").find("dog").find("beagle").text() Is there an equivalent way in jQuery to use xpath like $(xml).xpathfind("/animal/dog/beagle").text()? <animal> <dog> <beagle> droopy </beagle> ...

  Read the article

• Strange Flash AS3 xml Socket behavior

  - by Rnd_d

  I have a problem which I can't understand. To understand it I wrote a socket client on AS3 and a server on python/twisted, you can see the code of both applications below. Let's launch two clients at the same time, arrange them so that you can see both windows and press connection button in both windows. Then press and hold any button. What I'm expecting: Client with pressed button sends a message "some data" to the server, then the server sends this message to all the clients(including the original sender) . Then each client moves right the button 'connectButton' and prints a message to the log with time in the following format: "min:secs:milliseconds". What is going wrong: The motion is smooth in the client that sends the message, but in all other clients the motion is jerky. This happens because messages to those clients arrive later than to the original sending client. And if we have three clients (let's name them A,B,C) and we send a message from A, the sending time log of B and C will be the same. Why other clients recieve this messages later than the original sender? By the way, on ubuntu 10.04/chrome all the motion is smooth. Two clients are launched in separated chromes. windows screenshot Can't post linux screenshot, need more than 10 reputation to post more hyperlinks. Listing of log, four clients simultaneously: [16:29:33.280858] 62.140.224.1 >> some data [16:29:33.280912] 87.249.9.98 << some data [16:29:33.280970] 87.249.9.98 << some data [16:29:33.281025] 87.249.9.98 << some data [16:29:33.281079] 62.140.224.1 << some data [16:29:33.323267] 62.140.224.1 >> some data [16:29:33.323326] 87.249.9.98 << some data [16:29:33.323386] 87.249.9.98 << some data [16:29:33.323440] 87.249.9.98 << some data [16:29:33.323493] 62.140.224.1 << some data [16:29:34.123435] 62.140.224.1 >> some data [16:29:34.123525] 87.249.9.98 << some data [16:29:34.123593] 87.249.9.98 << some data [16:29:34.123648] 87.249.9.98 << some data [16:29:34.123702] 62.140.224.1 << some data AS3 client code package { import adobe.utils.CustomActions; import flash.display.Sprite; import flash.events.DataEvent; import flash.events.Event; import flash.events.IOErrorEvent; import flash.events.KeyboardEvent; import flash.events.MouseEvent; import flash.events.SecurityErrorEvent; import flash.net.XMLSocket; import flash.system.Security; import flash.text.TextField; public class Main extends Sprite { private var socket :XMLSocket; private var textField :TextField = new TextField; private var connectButton :TextField = new TextField; public function Main():void { if (stage) init(); else addEventListener(Event.ADDED_TO_STAGE, init); } private function init(event:Event = null):void { socket = new XMLSocket(); socket.addEventListener(Event.CONNECT, connectHandler); socket.addEventListener(DataEvent.DATA, dataHandler); stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler); addChild(textField); textField.y = 50; textField.width = 780; textField.height = 500; textField.border = true; connectButton.selectable = false; connectButton.border = true; connectButton.addEventListener(MouseEvent.MOUSE_DOWN, connectMouseDownHandler); connectButton.width = 105; connectButton.height = 20; connectButton.text = "click here to connect"; addChild(connectButton); } private function connectHandler(event:Event):void { textField.appendText("Connect\n"); textField.appendText("Press and hold any key\n"); } private function dataHandler(event:DataEvent):void { var now:Date = new Date(); textField.appendText(event.data + " time = " + now.getMinutes() + ":" + now.getSeconds() + ":" + now.getMilliseconds() + "\n"); connectButton.x += 2; } private function keyDownHandler(event:KeyboardEvent):void { socket.send("some data"); } private function connectMouseDownHandler(event:MouseEvent):void { var connectAddress:String = "ep1c.org"; var connectPort:Number = 13250; Security.loadPolicyFile("xmlsocket://" + connectAddress + ":" + String(connectPort)); socket.connect(connectAddress, connectPort); } } } Python server code from twisted.internet import reactor from twisted.internet.protocol import ServerFactory from twisted.protocols.basic import LineOnlyReceiver import datetime class EchoProtocol(LineOnlyReceiver): ##### name = "" id = 0 delimiter = chr(0) ##### def getName(self): return self.transport.getPeer().host def connectionMade(self): self.id = self.factory.getNextId() print "New connection from %s - id:%s" % (self.getName(), self.id) self.factory.clientProtocols[self.id] = self def connectionLost(self, reason): print "Lost connection from "+ self.getName() del self.factory.clientProtocols[self.id] self.factory.sendMessageToAllClients(self.getName() + " has disconnected.") def lineReceived(self, line): print "[%s] %s >> %s" % (datetime.datetime.now().time(), self, line) if line=="<policy-file-request/>": data = """<?xml version="1.0"?> <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd"> <!-- Policy file for xmlsocket://ep1c.org --> <cross-domain-policy> <allow-access-from domain="*" to-ports="%s" /> </cross-domain-policy>""" % PORT self.send(data) else: self.factory.sendMessageToAllClients( line ) def send(self, line): print "[%s] %s << %s" % (datetime.datetime.now().time(), self, line) if line: self.transport.write( str(line) + chr(0)) else: print "Nothing to send" def __str__(self): return self.getName() class ChatProtocolFactory(ServerFactory): protocol = EchoProtocol def __init__(self): self.clientProtocols = {} self.nextId = 0 def getNextId(self): id = self.nextId self.nextId += 1 return id def sendMessageToAllClients(self, msg): for client in self.clientProtocols: self.clientProtocols[client].send(msg) def sendMessageToClient(self, id, msg): self.clientProtocols[id].send(msg) PORT = 13250 print "Starting Server" factory = ChatProtocolFactory() reactor.listenTCP(PORT, factory) reactor.run()

  Read the article

• Serving static content with jetty 7, using defaultservlet configured from web.xml

  - by Chilly

  Hi All, This is jetty 7 and xml configured, not embedded. I'm trying to serve a static file, crossdomain.xml, to an app that connects to a datasource I run from jetty. To do this, I configured a servlet and its mapping thus: default org.eclipse.jetty.servlet.DefaultServlet resourceBase /moo/somedirectory default /* Sadly all I get are 404's. Any help would be much appreciated, btw the rest of my web.xm lfile looks like: <?xml version="1.0" encoding="UTF-8"?> <web-app xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5" cometd org.cometd.server.continuation.ContinuationCometdServlet 1 cometd /cometd/* default org.eclipse.jetty.servlet.DefaultServlet resourceBase /foo/foo default /* initializer com.foo.research.Initializer 2 cross-origin org.eclipse.jetty.servlets.CrossOriginFilter cross-origin /cometd/* </web-app>

  Read the article

• Users suddenly missing write permissions to the root drive c within an active directory domain

  - by Kevin

  I'm managing an active directory single domain environment on some Windows Server 2008, Windows Server 2008 R2 and Windows Server 2012 machines. Since a few weeks I got a strange issue. Some users (not all!) report that they cannot any longer save, copy or write files to the root drive c, whether on their clients (vista, win 7) nor via remote desktop connection on a Windows Server 2008 machine. Even running programs that require direct write permissions to the root drive without administrator permissions fail to do so since then. The affected users have local administrator permissions. The question I'm facing now is: What caused this change of system behavior? Why did this happen? I didn't find out yet. What was the last thing I did before it happened? The last action that was made before it happened was the rollout of a GPO containing network drive mappings for the users depending on their security group membership. All network drives are located on a linux server with samba enabled. We did not change any UAC settings, and they have always been activated. However I can't imagine that rolling out this GPO caused the problem. Has anybody faced an issue like that? Just in case: I know that it is for a specific reason that an user without administrative privileges is prevented from writing to the root drive since windows vista and the implementation of UAC. I don't think that those users should be able to write to drive c, but I try to figure out why this is happening and a few weeks ago this was still working. I also know that a user who is a member of the local administrators group does not execute anything with administrator permissions per default unless he or she executes a program with this permissions. What did I do yet? I checked the permissions of the affected programs, the affected clients/server. Didn't find something special. I checked ALL of our GPOs if there exist any restrictions that could prevent the affected users from writing to the root drive. Did not find any settings. I checked the UAC settings of the affected users and compared those to other users that still can write to the root drive. Everything similar. I googled though the internet and tried to find someone who had a similar problem. Did not find one. Has anybody an idea? Thank you very much. Edit: The GPO that was rolled out does the following (Please excuse if the settings are not named exactly like that, I translated the settings into english): **Windows Settings -- Network Drive Mappings -- Drive N: -- General:** Action: Replace **Properties:** Letter: N Location: \\path-to-drive\drivename Re-Establish connection: deactivated Label as: Name_of_the_Share Use first available Option: deactivated **Windows Settings -- Network Drive Mappings -- Drive N: -- Public: Options:** On error don't process any further elements for this extension: no Run as the logged in user: no remove element if it is not applied anymore: no Only apply once: no **Securitygroup:** Attribute -- Value bool -- AND not -- 0 name -- domain\groupname sid -- sid-of-the-group userContext -- 1 primaryGroup -- 0 localGroup -- 0 **Securitygroup:** Attribute -- Value bool -- OR not -- 0 name -- domain\another-groupname sid -- sid-of-the-group userContext -- 1 primaryGroup -- 0 localGroup -- 0 Edit: The Error-Message of an affected users says the following: Due to an unexpected error you can't copy the file. Error-Code 0x80070522: The client is missing a required permission. The command icacls C: shows the following: NT-AUTORITY\SYSTEM:(OI)(CI)(F) PRE-DEFINED\Administrators:(OI)(CI)(F) computername\username:(OI)(CI)(F) A college just told me that also the primary domain-controller (PDC) changed from Windows Server 2008 to Windows Server 2012. That also may be a reason. Any suggestions?

  Read the article

• XSLT Transformation of XML File

  - by Russ Clark

  I've written a simple XML Document that I am trying to transform with an XSLT file, but I get no results when I run the code. Here is my XML document: <?xml version="1.0" encoding="utf-8" ?> <Employee xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="XSLT_MVC.Controllers"> <ID>42</ID> <Name>Russ</Name> </Employee> And here is the XSLT file: <?xml version="1.0" encoding="utf-8"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" exclude-result-prefixes="msxsl" xmlns:ex="XSLT_MVC.Controllers" > <xsl:output method="xml" indent="yes"/> <xsl:template match="/"> <xsl:copy> <!--<xsl:apply-templates select="@* | node()"/>--> <xsl:value-of select="ex:Employee/Name"/> </xsl:copy> </xsl:template> </xsl:stylesheet> Here is the code (from a C# console app) I am trying to run to perform the transform: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Xml; using System.Xml.Xsl; using System.Xml.XPath; namespace XSLT { class Program { static void Main(string[] args) { Transform(); } public static void Transform() { XPathDocument myXPathDoc = new XPathDocument(@"docs\sampledoc.xml"); XslTransform myXslTrans = new XslTransform(); myXslTrans.Load(@"docs\new.xslt"); XmlTextWriter myWriter = new XmlTextWriter( "results.html", null); myXslTrans.Transform(myXPathDoc, null, myWriter); myWriter.Close(); } } } When I run the code I get a blank html file. I think I may have problems with the namespaces, but am not sure. Can anyone help with this?

  Read the article

• SSIS(sql server integration service) xml data flow

  - by swapna

  Hi, I have an xml file the content which i have to write to a Database table using ssis pacakge. I am using xml source nad oledb destination My issue now is this xml file generate multiple outputs .(event,produt,offer,form) etc. But i need to write all in one data row(more than one if 2 products are there for the event) in the database. But i do not know how to use this multiple outputs and make a single row for a event. I hav read numerous articles about this subject but not able to take a decision.what is the right way of doing this. 1) xml source ? (if i use this how do i merge the multiple outputs) 2) or a script task using xml objects read and write to the DB. or anything new ? Please provide me some solutions xml sample file * - ABc. 2009-06-07 2010-04-30 region test 1 contact - offertest product1 product1 187 * Thanks SNA

  Read the article

• Update configSource of XML element in web.config using Powershell by passing in Parameters

  - by Howard

  I am trying to figure out a way to update my web.config for different environments by updating the configSource for the appSettings element in the web.config. Here are the way I know how to do it. $xml.get_DocumentElement().appSettings.configSource = $replaced_test The problem is that I want one base script where I can pass in different nodes to the script that I want to change and update but I am not sure how to do it. For example, I want to be able to call a powershell script like this changeWebConfig.ps1 nodeToChange newValueofNode I hope this was clear enough. This is the code I have now. $webConfigPath = "C:\web.config" # Get the content of the config file and cast it to XML $xml = [xml](get-content $webConfigPath) #this was the trick I had been looking for $root = $xml.get_DocumentElement()."system.serviceModel".client.configSource = $replace # Save it $xml.Save($webConfigPath)

  Read the article

• to print local xml file through NSData?

  - by senthilmuthu

  hi, i want to take some xml data from local path,and to parse,but when i use following code NSLog returns(content) different texts which is differed from xml file, how can i get exact xml data to check ,it consists correct xml data or not? any help please? when i parse , it returns nothing..i have saved the file as .xml and copied to local resource folder? NSString *xmlFilePath = [[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:@"samp.xml"]; NSString *xmlFileContents = [NSString stringWithContentsOfFile:xmlFilePath]; NSData *data = [NSData dataWithBytes:[xmlFileContents UTF8String] length:[xmlFileContents lengthOfBytesUsingEncoding: NSUTF8StringEncoding]]; NSString *content=[[NSString alloc] initWithBytes:[data bytes] length:[data length] encoding:NSUTF8StringEncoding]; NSLog(@"%@",content);

  Read the article

• Draw and move animation from xml in android

  - by Muahammad Yousuf Saif

  What I want to do: I want to draw image from xml and then animate it from xml. this image should move with constant speed anywhere on our screen. Now the problem is: I can draw and animate image from xml but i can not move this image with constant speed. I am using two xml files: One for animate and other for moving. XML for animation: android:duration="200"/ XML file for move: <translate android:interpolator="@android:anim/linear_interpolator" android:fromXDelta="2%" android:toXDelta="400%" android:fromYDelta="2%" android:toYDelta="800%"/> Activity.java file code in onCreate() method: ImageView rocketImage = (ImageView) findViewById(R.id.rocket_image); Animation hyperspaceJump = AnimationUtils.loadAnimation(this, R.anim.hyperspace_jump); rocketImage.setBackgroundResource(R.drawable.rocket_thrust); AnimationDrawable rocketAnimation = (AnimationDrawable) rocketImage.getBackground(); rocketAnimation.start(); rocketImage.startAnimation(hyperspaceJump);

  Read the article

• How to test the XML sent to a web service in Ruby/Rails

  - by Jason Langenauer

  I'm looking for the best way to write unit test for code that POSTs to an external web service. The body of the POST request is an XML document which describes the actions and data for the web service to perform. Now, I've wrapped the webservice in its own class (similar to ActiveResource), and I can't see any way to test the exact XML being generated by the class without breaking encapsulation by exposing some of the internal XML generation as public methods on the class. This seems to be a code smell - from the point-of-view of the users of the class, they should not know, nor care, how the class actually implements the web service call, be it with XML, JSON or carrier pigeons. For an example of the class: class Resource def new #initialize the class end def save! Http.post("http://webservice.com", self.to_xml) end private def to_xml # returns an XML representation of self end end I want to be able to test the XML generated to ensure it conforms to what the specs for the web service are expecting. So can I best do this, without making to_xml a public method?

  Read the article

• Ajax: Load XML from different domain?

  - by John Isaacks

  I have signed up(paid) for Google site search. They have me a url of a sort of web service where I can send a query to it, it searches my site, and it returns XML of the search results. Well I am trying to load this XML via Ajax from a page on my site but I cannot. I can load from any of my pages on my domain so I am assuming it is because of the XML being on Google's domain. So there has got to be a way to load it though, I don't think they would have given me the URL if I couldn't do anything with it lol. Does anyone know how to do this? Thanks! UPDATE: this is what the page says on google that gave me the XML: How to get XML You can get XML results for your search engine by replacing query+terms with your search query in this URL: http://www.google.com/cse?cx=MY_UNIQUE_KEY&client=google-csbe&output=xml_no_dtd&q=query+terms Where MY_UNIQUE_KEY = my unique key.

  Read the article

• How to estimate memory need by XPathDocument for a specific xml file

  - by bill seacham

  Is there any way to estimate the memory requirement for creating an XpathDocument instance based on the file size of the xml? XpathDocument xdoc = new XpathDocument(xmlfile); Is there any way to programmatically stop the process of creating the XpathDocument if memory drops to a very low level? Since it loads the entire xml into memory, it would be nice to know ahead of time if the xml is too big. What I have found is that when I create a new XpathDocument with a big xml file, an outofmemory exception is never fired, but that the process slows to a crawl, only 5 Mb of memory remains a available and the Task Manager reports it is not responding. This happened with a 266 Mb xml file when there was 584 Mb of ram. I was able to load a 150 Mb file with no problems in 18. After loading the xml, I want to do xpath queries using an XpathNavigator and an XpathNodeIterator. I am using .net 2.0, xp sp3.

  Read the article

• get url:xml why external url does not work

  - by Kazim Cubbali

  I am trying to grab information from an external xml with the following code. It only worked when I uploaded same file to my servers. Why cant I grab information from an external url? <script language="javascript"> // This script uses jQuery to retrieve the news XML file and display the contents $(document).ready(function(){ $.ajax({ type: "GET", url: "www.simplyprofound.com/samples/xml_jquery/sample.xml", dataType: "xml", success: function(xml) { $(xml).find('item').each(function(){ var title = $(this).find('title').text(); var source = $(this).find('source').text(); var description = $(this).find('description').text(); $('<div class="news_title"></div>').html(title).appendTo('#news_wrap'); $('<div class="news_source"></div>').html(source).appendTo('#news_wrap'); $('<div class="news_description"></div>').html(description).appendTo('#news_wrap'); }); } }); }); </script>

  Read the article

• The xml is not switching when device orientation change

  - by Labeeb P

  Hi, I have made two folders, res/layout and res/layout-land The output i got If I start the application in portrait mode, it will always use the xml in layout folder if the application run in portrait mode. And will not use xml in layout-land if i change the device to landscape mode If it start in landscape mode it only use the xml in layout-land The xml is not switching when the orientation change What i expect was It should use the xml in layout folder while it is in portrait mode and use the xml in layout-land while in landscape mode In the Manifest file i have added android:configChanges="orientation" for the activity and <supports-screens android:resizeable="true" android:largeScreens="true" android:normalScreens="true" android:anyDensity="true" /> Did i missed any thing here? What changes i need to do here? Thank You

  Read the article

• problem with for xml explicit clause in sql server 2005

  - by harrycode

  I am using for xml explicit clause in sql to send table data as xml from sql to asp.net page. I have created a stored procedure when i run store procedure in sql mgmt studio my xml is same as expected. But when I fetch It in asp.net then Xml returned is broken into two rows if xml exceeds certain character limit. I want result to be in single row. I am unable to figure out why single xml string is broken into two rows. please help

  Read the article

• The Sitemap Paradox

  - by Jeff Atwood

  We use a sitemap on Stack Overflow, but I have mixed feelings about it. Web crawlers usually discover pages from links within the site and from other sites. Sitemaps supplement this data to allow crawlers that support Sitemaps to pick up all URLs in the Sitemap and learn about those URLs using the associated metadata. Using the Sitemap protocol does not guarantee that web pages are included in search engines, but provides hints for web crawlers to do a better job of crawling your site. Based on our two years' experience with sitemaps, there's something fundamentally paradoxical about the sitemap: Sitemaps are intended for sites that are hard to crawl properly. If Google can't successfully crawl your site to find a link, but is able to find it in the sitemap it gives the sitemap link no weight and will not index it! That's the sitemap paradox -- if your site isn't being properly crawled (for whatever reason), using a sitemap will not help you! Google goes out of their way to make no sitemap guarantees: "We cannot make any predictions or guarantees about when or if your URLs will be crawled or added to our index" citation "We don't guarantee that we'll crawl or index all of your URLs. For example, we won't crawl or index image URLs contained in your Sitemap." citation "submitting a Sitemap doesn't guarantee that all pages of your site will be crawled or included in our search results" citation Given that links found in sitemaps are merely recommendations, whereas links found on your own website proper are considered canonical ... it seems the only logical thing to do is avoid having a sitemap and make damn sure that Google and any other search engine can properly spider your site using the plain old standard web pages everyone else sees. By the time you have done that, and are getting spidered nice and thoroughly so Google can see that your own site links to these pages, and would be willing to crawl the links -- uh, why do we need a sitemap, again? The sitemap can be actively harmful, because it distracts you from ensuring that search engine spiders are able to successfully crawl your whole site. "Oh, it doesn't matter if the crawler can see it, we'll just slap those links in the sitemap!" Reality is quite the opposite in our experience. That seems more than a little ironic considering sitemaps were intended for sites that have a very deep collection of links or complex UI that may be hard to spider. In our experience, the sitemap does not help, because if Google can't find the link on your site proper, it won't index it from the sitemap anyway. We've seen this proven time and time again with Stack Overflow questions. Am I wrong? Do sitemaps make sense, and we're somehow just using them incorrectly?

  Read the article

• Translate report data export from RUEI into HTML for import into OpenOffice Calc Spreadsheets

  - by [email protected]

  A common question of users is, How to import the data from the automated data export of Real User Experience Insight (RUEI) into tools for archiving, dashboarding or combination with other sets of data.XML is well-suited for such a translation via the companion Extensible Stylesheet Language Transformations (XSLT). Basically XSLT utilizes XSL, a template on what to read from your input XML data file and where to place it into the target document. The target document can be anything you like, i.e. XHTML, CSV, or even a OpenOffice Spreadsheet, etc. as long as it is a plain text format.XML 2 OpenOffice.org SpreadsheetFor the XSLT to work as an OpenOffice.org Calc Import Filter:How to add an XML Import Filter to OpenOffice CalcStart OpenOffice.org Calc andselect Tools > XML Filter SettingsNew...Fill in the details as follows:Filter name: RUEI Import filterApplication: OpenOffice.org Calc (.ods)Name of file type: Oracle Real User Experience InsightFile extension: xmlSwitch to the transformation tab and enter/select the following leaving the rest untouchedXSLT for import: ruei_report_data_import_filter.xslPlease see at the end of this blog post for a download of the referenced file.Select RUEI Import filter from list and Test XSLTClick on Browse to selectTransform file: export.php.xmlOpenOffice.org Calc will transform and load the XML file you retrieved from RUEI in a human-readable format.You can now select File > Open... and change the filetype to open your RUEI exports directly in OpenOffice.org Calc, just like any other a native Spreadsheet format.Files of type: Oracle Real User Experience Insight (*.xml)File name: export.php.xml XML 2 XHTMLMost XML-powered browsers provides for inherent XSL Transformation capabilities, you only have to reference the XSLT Stylesheet in the head of your XML file. Then open the file in your favourite Web Browser, Firefox, Opera, Safari or Internet Explorer alike.<?xml version="1.0" encoding="ISO-8859-1"?><!-- inserted line below --> <?xml-stylesheet type="text/xsl" href="ruei_report_data_export_2_xhtml.xsl"?><!-- inserted line above --><report>You can find a patched example export from RUEI plus the above referenced XSL-Stylesheets here: export.php.xml - Example report data export from RUEI ruei_report_data_export_2_xhtml.xsl - RUEI to XHTML XSL Transformation Stylesheetruei_report_data_import_filter.xsl - OpenOffice.org XML import filter for RUEI report export data If you would like to do things like this on the command line you can use either Xalan or xsltproc.The basic command syntax for xsltproc is very simple:xsltproc -o output.file stylesheet.xslt inputfile.xmlYou can use this with the above two stylesheets to translate RUEI Data Exports into XHTML and/or OpenOffice.org Calc ODS-Format. Or you could write your own XSLT to transform into Comma separated Value lists.Please let me know what you think or do with this information in the comments below.Kind regards,Stefan ThiemeReferences used:OpenOffice XML Filter - Create XSLT filters for import and export - http://user.services.openoffice.org/en/forum/viewtopic.php?f=45&t=3490SUN OpenOffice.org XML File Format 1.0 - http://xml.openoffice.org/xml_specification.pdf

  Read the article

• Daily tech links for .net and related technologies - Apr 8-10, 2010

  - by SanjeevAgarwal

  Daily tech links for .net and related technologies - Apr 8-10, 2010 Web Development Using RIA DomainServices with ASP.NET and MVC 2 - geekswithblogs Using AntiXss As The Default Encoder For ASP.NET - Phil Haack New Syntax for HTML Encoding Output in ASP.NET 4 (and ASP.NET MVC 2) - Scott Gu Multi-Step Processing in ASP.NET - Dave M. Bush MvcContrib - Portable Area – Visual Studio project template - erichexter Encoding/Decoding URIs and HTML in the .NET 4 Client Profile - Pete Brown Jon Takes Five...(read more)

  Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >