Search Results

Search found 4224 results on 169 pages for 'dual gpu'.

Page 13/169 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Dual External Monitors Through Docking Station on ASUS G73JW-XT1

  - by user60695

  I am getting an ASUS G73JW-XT1; and I would like to set it up so that I can plug it into a docking station at my desk, and use 2 external monitors (not the laptop display and an additional monitor). The computer supports a DVI and HDMI output, but I cannot find any docking stations that will support two external displays, as well as audio ports and USB ports for other peripherals. Does anybody know of a specific docking station that will do this, or another workaround without having to plug in several things to my laptop every time I bring it to my desk?

  Read the article

• Does dual-channel work only with an even number of RAM sticks?

  - by iconiK

  I have noticed that on the ASUS P5QL Pro motherboard the BIOS says "Dual Channel Asymmetric Mode" during POST. The motherboard has three 2GB Kingston ValueRAM 800 MHz DIMMs populated in the first 3 slots from the CPU socket. I have not run any benchmarks to verify that dual-channel is somehow being used, but I believed that dual-channel has to have an even number of sticks (and for triple channel, a multiple of 3). Another example is the Intel DX58SO motherboard; it has four DIMM slots, yet it's an LGA 1366 motherboard which does triple-channel. Apparently triple-channel still works with four DIMMs, instead of falling back to dual-channel. What does the BIOS' POST message mean in those case? Is dual-channel really used for the first two DIMMs, with the other one being an odd one in single-channel mode?

  Read the article

• Grub Solaris FreeBSD dual boot

  - by pallavt

  I have solaris 10 installed on the first hard disk and freebsd installed on the second hard disk I edited the /boot/grub/menu.lst from solaris to the following title FreeBSD root (hd1,0) kernel /boot/loader Now when I try to boot into freebsd via the grub, it gives the following error root (hd1,0) Filesystem type unknown, partition type 0xee kernel /boot/loader Error 17: cannot mount selected partition

  Read the article

• Windows 8 - Ubuntu dual boot

  - by Serkan Özkan

  I bought a new Toshiba s855 notebook with windows 8 preinstalled. Secure boot feature was enabled by default. I installed latest version of ubuntu after disabling secure boot feature(it was not possible to install ubuntu without disabling secure boot). But now when I enable secure boot, the system automatically boots into windows 8, and it boots into ubuntu when I disable secure boot. EasyBCD lists the following boot entries but I can only see Windows 8 in boot menu: Default: Windows 8 Timeout: 7 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Ubuntu BCD ID: {971641cd-304a-11e2-be82-806e6f6e6963} Device: \Device\HarddiskVolume2 Bootloader Path: \EFI\ubuntu\grubx64.efi ... Entry #5 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Any recommendations will be appreciated.

  Read the article

• Dual-WAN router

  - by aix

  I am looking for a router that would fit the following requirements: Two WAN interfaces: the primary is PPPoE, the secondary will link to a GigE port on another router (a 100Mbps link will suffice); Two (ideally four) GigE LAN ports; No requirement for a firewall; No requirement for Wi-Fi; Inexpensive. The plan for the two WAN interfaces is as follows. All outbound traffic will go to the primary, with exceptions based on destination IP/subnet or possibly on src+dest IPs/subnets. Such exceptions should be routed to the secondary. It would be very nice if, should the primary go down, the secondary would automatically take over for all outbound traffic. I am reasonably sure that I can put something together based on dd-wrt. However, I'd like to hear from you what alternatives are out there (especially something easier to set up for my use case, even if it means paying more for the hardware.)

  Read the article

• Dual boot Windows 8 and Ubuntu?

  - by askvictor

  I've installed Windows 8 on a machine (lenovo x220 laptop) with Ubuntu 12.10 already installed on another disk. I am guessing that Windows 8 has convinced the laptop to switch to UEFI boot (rather than the BIOS boot that was there previously) as the Lenovo splash screen on startup now no longer has the options to interrupt the boot process (e.g. to choose the boot drive). Previously I had Windows 8 on one drive and Ubuntu on the other drive, so could choose my OS through the BIOS rather than through grub or other bootloader but now no longer have that option. How can I get back the option to boot Ubuntu? I would sort of prefer UEFI boot as it seems much faster than BIOS.

  Read the article

• Dual Booting Ubuntu on my Core i7 64 bit with Windows 7

  - by Bragaadeesh

  Hi, I downloaded the ubuntu version 10 from internet and tried to run the wbu.exe inside the image that I burnt into a CD. I am getting the following error during running it My Details OS: Windows 7 Ultimate; Processor : Core Quad i7; RAM : 4GB; Graphics Card : 1GB nVidia Any help is much appreciated. Thanks!

  Read the article

• emulate dual monitor using a second machine

  - by Hemal Pandya

  I have monitors of my two machines side by side and I use them both with a single keyboard/mouse using Google Synergy+ which works great. But is it possible to use the monitor of my secondary machine as the secondary monitor of my primary? I am on XP so from what I understand I cannot just rdc from secondary to this primary. In any case that would be a different session altogether and I would prefer to be able to extend my desktop over the two monitors. Any solutions or suggestions? Thanks in advance.

  Read the article

• emulate dual monitor using a second machine

  - by Hemal Pandya

  I have monitors of my two machines side by side and I use them both with a single keyboard/mouse using Synergy+ (now hosted at Google Code) which works great. But is it possible to use the monitor of my secondary machine as the secondary monitor of my primary? I am on XP so from what I understand I cannot just rdc from secondary to this primary. In any case that would be a different session altogether and I would prefer to be able to extend my desktop over the two monitors. Any solutions or suggestions? Thanks in advance.

  Read the article

• Dual HDD dual boot Win7/Win7 hibernate corrupts partitions?

  - by Ivan Zlatev

  I have two SSDs in my laptop. Both have 2 partitions each one with Windows 7 64bit and another one with OEM stuff on it (SYSTEM_DRV). I use the BIOS boot menu to boot between the drives. I have removed the drive letters so that no partitions of drive 1 are mapped in windows 2 on drive 2 and wise-versa. What I have observered however is that when I hibernate windows 1, boot windows 2 do some work and shutdown then resume windows 1 - the windows 2 partition will get corrupt quite often. Just happened actually - it is shown as "RAW" in the Disk manager instead of NTFS and windows will blue screen at boot. Alternatively I've seen cases where chkdsk will run and will wipe out all security descriptors making the partition completly unbootable. Why am I seeing these corruptions and what can I do to prevent them?

  Read the article

• Dual-booting Windows 7 and Ubuntu

  - by CFP

  Hello everyone, I've just received my Dell Studio 17 laptop, which comes with Windows 7 x64 preinstalled. I'm having quite a hard time installing ubuntu on it. First of all, here is how I partitioned the drive using GPartEd: |==Dell utility partition==|==Dell Recovery partition==|==Windows 7==|[==Ubuntu==|==Data partition==]| Where [] denotes an extended partition. Here are the steps I completed: I used GParted to create this structure, keeping windows 7 installed I booted ubuntu LiveCD, and installed it on the right partition I let it install grub automatically I rebooted intu ubuntu I went back to windows 7, no problems I then rebooted. Grub was gone. I used Super Grub Disk to restore grub, it didn't work. I tried to boot into ubuntu from supergrubdisk, but grub couldn't fint the boot folder I then reinstalled ubuntu, went through the same steps, but there SGD did boot my ubuntu I reverted to the previous version of grub, and installed it on my hard drive It worked, but trying to boot win7 got me the "No MBR, press Ctrl+Alt+Del to reboot" error I used the windows 7 cd to restore the MBR (the auto wizard didn't work, had to rebuild the mbr from command line Now Ubuntu is gone. 7 works fine I read a lot about this, and realized that many people could simply not boot win7 again after encountering this problem. Now I'd like to restore GRUB, but I really won't go through the hassle of doing a full new cycle of installing/reinstalling everything again. Is there a GRUB guru around, to provide me with a detailed guide to not screwing everything up once again? Thanks a lot!

  Read the article

• NVidia TwinView - slow rendering on dual desktop

  - by lisak

  Hey, does anybody have experience with it ? I've set it up 4 times on 4 different machines. And there was always problems with slow rendering ( for instance : scrolling pages in browser is not fluent). But there always was something that finally made it work perfectly... I remember that one time this option helped, but not now Option "RenderAccel" "1" Nvidia geforce 8400GS or Zotac geforce 9500GT Monitors connected via dvi and hdmi connectors proper nvidia driver installed Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "0" EndSection Section "Files" ModulePath "/usr/lib64/xorg/modules" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/OTF" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/cyrillic" EndSection Section "Module" Load "dri2" Load "glx" Load "extmod" Load "record" Load "dbe" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Acer AL1715" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Device" Identifier "Nvidia" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "MSI big bang-fuzion" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "RenderAccel" "1" Option "AllowGLXWithComposite" "1" Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1280x1024 +1920+0, DFP: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Regarding partitions for dual-booting Ubuntu with pre-existing Windows 7

  - by Shasteriskt

  I have zero actual experience with configuring disk partitions and the stuff I have read for the past few hours have been confusing me a bit, so please bear with me. First of all, I'd like to explain what I'm setting to achieve: Windows 7 with: C:\ Windows 7 (pre-existing installation) D:\ Data (Already exists and has files already) Ubuntu 11 - Does not exist yet, but I already have a LiveCD in hand. \root directory for Ubuntu \home on its own partition I plan \swap on its own partition with around 8GB Here is the current situation: I have a single 500 GB hard-disk with Windows 7 x64 installed, and the current partition schemes is as follows: System Reserved: 100 MB (Primary, Active) C: 100 GB - Where Windows 7 is installed (Primary) D: 365 GB - Where my files are located, LOTS of free space (Primary) Now, I would like to shrink my D: drive and create around 40 GB of unallocated disk space for the Ubuntu installation, but here what's confusing me a bit: I'm thinking I would create an extended partition and subdivide it into 3 logical partitions for the Ubuntu setup I had in mind. (If you think my setup is a bad idea, please let me know & why. I also hope you can suggest a better one...) I am aware that I can only have up to 4 primary partitions, or 3 primary partitions with 1 extended parition max. Now, does the System Recovery portion count as one primary partition? I'm really new to these things and it is totally unclear to me. In shrinking my D: drive using Windows 7's Disk Management tool, I would get an unallocated free space which I don't know how to make an extended partition from. It seems like I can only create a primary partition from it, not an extended one. How do I go about it? (I'd also like to note, if it is of any importance, that I am trying to avoid using the option to install Ubuntu alongside Windows, and much rather prefer using the custom install where I can specify which drives I wish to use and stuff. Somehow I feel its safer that way.)

  Read the article

• Dual Boot Installing Ubuntu 12.04 with Windows 7 (64) on a non UEFI system fails

  - by Randnum

  I cannot seem to install the correct boot loader for a non-UEFI firmware system. I'm trying to install Ubuntu 12.04 and Windows 7 (64) which are technically compatible with GPT but for windows only if the firmware is UEFI enabled. My system uses the old BIOS system and does not support UEFI. Therefore, whenever I finish my Ubuntu install and try to install Windows I get a "cannot install to GPT partition type" error. Even if I use Gparted to format a special NTFS file format for windows it can't handle the GPT partition style because it doesn't have UEFI. But my ubuntu install always forces GPT during installation and never asks if I want to install the old BIOS style MBR instead. How do I resolve this? Both OS's will install fine on their own the problem is when I try to install the second OS it doesn't recognize any of the other's partitions and tries to rewrite it's own on top of the other. I've tried both OS's first and always run into the same problem. Since there is no way to make Windows recognize GPT without upgrading my Motherboard how do I tell Ubuntu to use the old BIOS MBR on install? Do I have to download a special Ubuntu with a specific grub version? or should I manaually configure my partition somehow to force it not to use GPT? Thank you,

  Read the article

• Boot records messed on dual boot (win7 and ubuntu) machine with SSD and HDD

  - by Michael

  i have a lenovo ideapad y570 with two hard drives: SSD and normal HDD both managed by RapidDrive and windows 7 pre-installed. First, i have shrunk my 500 GB HDD a little bit to make some place for a linux installation. Then i installed linux mint 12 to it, also installed grub onto the drive (dev/sdb). Installation programm has not allowed me to install grub on sda. Then i replaced linux mint with ubuntu 12.04 but installed grub onto the SSD (which is dev/sda and was the default-option). After that i could boot into my windows, only ubuntu worked. So i did a research, and tried: rewriting mbr of windows into sda1, reinstalling grub, replacing grub2 with grub-legacy, and now i think my partitions table are totally messed. Here is fdisk -l output: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 * 2048 411647 204800 7 HPFS/NTFS/exFAT /dev/sda2 411648 1009430959 504509656 7 HPFS/NTFS/exFAT Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5e5d1cc8 Device Boot Start End Blocks Id System /dev/sdb1 * 1979 884389887 442193954+ 12 Compaq diagnostics /dev/sdb2 884391934 976771071 46189569 5 Extended /dev/sdb5 884391936 937705471 26656768 83 Linux /dev/sdb6 937707520 967006207 14649344 83 Linux /dev/sdb7 967008256 976771071 4881408 82 Linux swap / Solaris I also cant mount any windows partitions to recover data. And when i open gparted, the whole sda-disk appears unallocated and it states "can not have a partition outside the disk!", also the end-sector address of /dev/sda2 confuses me. If i boot from the SSD, it throws some mbr error and wont boot, if i boot from the HDD, i only get the grub bash. How do i restore the partition tables? I can boot only from a live-cd at the machine. Thanks for any help.

  Read the article

• NVidia TwinView - slow rendering on dual desktop [closed]

  - by lisak

  Hey, does anybody have experience with it ? I've set it up 4 times on 4 different machines. And there was always problems with slow rendering ( for instance : scrolling pages in browser is not fluent). But there always was something that finally made it work perfectly... I remember that one time this option helped, but not now Option "RenderAccel" "1" Nvidia geforce 8400GS or Zotac geforce 9500GT Monitors connected via dvi and hdmi connectors proper nvidia driver installed Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "0" EndSection Section "Files" ModulePath "/usr/lib64/xorg/modules" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/OTF" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/cyrillic" EndSection Section "Module" Load "dri2" Load "glx" Load "extmod" Load "record" Load "dbe" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Acer AL1715" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Device" Identifier "Nvidia" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "MSI big bang-fuzion" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "RenderAccel" "1" Option "AllowGLXWithComposite" "1" Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1280x1024 +1920+0, DFP: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• After installing Windows 7, I can no longer get to Debian 6 (dual boot)

  - by Jeremy

  I had Debian 6 on my machine (Dell Vostro 260) and used GParted to shrink the partition. I then tried installing Windows 7 on that partition. After Windows 7 installed, I could not choose which OS to run. It would just boot into Windows. I ran GParted again, and saw that Windows created another partition, labeled "System Reserved". That partition had the boot flag set. I tried moving the boot flag to other partitions, including my Debian partition and one with a file system "linux-swap". No option would actually load an OS or anything except for the Windows partition, which is not what I want. Is it worth it to try to fix this installation, or should I start over. I have all my data backed up, so I can easily install from scratch if I need to. If I do start from scratch, which OS should I install first? And then, how do I set up the partitions to install the other OS? Let me know if you have any questions. Thanks for your help.

  Read the article

• dual-boot does not work

  - by elyashiv

  I have a PC with linux-mint installed on it. I wanted to install win-7 along-side, for some reasones. what I have done is: create a bootable USB-stick with Ubontu ios. restarted the computer, this time with Ubuntu (running from my disk-on-key). created a partition on the main HD using GPart. formated the partition to NTFS. restarted the computer, this time through the installation CD for win-7. installed win-7 with normal settings. that all worked, and I'm writing this through win-7. the thing is - when I boot my system, I don't get to choose what OS to run. I checked the settings in msconfig, and in boot label it has just win-7. how can I boot linux?

  Read the article

• Dual Monitor + Virtual Desktop software (plus for cube)

  - by xenithorb

  I've recently purchased another monitor, my first one being a TV and being much larger. I now sit at a desk and use my shiny new 24" LED more often, but I like to extend the desktop into the TV. The problem presented with this is to save power and the longevity of my 47" VIZIO, I try to keep it off when possible. What I'm seeking sounds very simple - If any of you have ever used Compiz or Deskspace (Yod'm) - You'll know what im referring to when I talk about a "cube." The most important functionality I'm looking for is the ability to scroll desktop contents between both displays and virtual desktops. Deskspace does and excellent job of presenting an attractive cube, but it creates a separate cube and virtual desktop space for the second extended monitor (now the TV) - Again, what I'm looking to do is scroll between virtual desktops, by passing through both monitors. The net effect of this functionality would allow me to scroll the contents of the extended monitor to the first monitor should a window get caught there without having to turn on the TV. So imagine the horizontal portion of a cube as being actual real monitors - is there anything that allows one to rotate desktops between displays?

  Read the article

• dual boot with windows and linux

  - by nuttynibbles

  hi, i have windows xp installed. Recently i installed suse linux and afterwhich suse linux is the main OS to be booted up. However suse rovide options to boot windows 1 (window xp) during boot up. If i uninstall suse linux (i've tried), windows won't be able to be booted up as the grub master boot will be corrupted. my question is: is there a software tool which can be booted on cd to modify the master boot record so as to reduce much effort??

  Read the article

• dual boot with windows and linux

  - by nuttynibbles

  hi, i have windows xp installed. Recently i installed suse linux and afterwhich suse linux is the main OS to be booted up. However suse rovide options to boot windows 1 (window xp) during boot up. If i uninstall suse linux (i've tried), windows won't be able to be booted up as the grub master boot will be corrupted. my question is: is there a software tool which can be booted on cd to modify the master boot record so as to reduce much effort??

  Read the article

• COM Dual Interfaces

  - by Tony

  A dual interface in COM is one that is able to be accessed via a DispInterface or via VTable methods. Now can someone tell me what is exactly what the difference is between the two methods? I thought that a VTable is a virtual table which holds the pointers to the different functions when implementing a class hierarchy which has virtual functions that can be overridden in child classes. However I do not see how this is related to a dual interface in COM?

  Read the article

• dual map structure implementation?

  - by Danra

  Hey, I'm looking for a standard dual-map structure - is there one implemented in std/boost/another standard C++ library? When I say "dual-map" I mean a map which can be indexed efficiently both by the key and the "value" (it actually has two key types instead of one key type and one value type). for example: dualmap<int,string> m; m[1] = "foo"; m["bar"] = 2 int a = m["bar"]; // a = 2 Thanks, Dan

  Read the article

• Proof Of Concept: Open-Source Multi-GPU Rendering!

  <b>Phoronix:</b> "David's goals with Prime are to allow a second GPU to render 3D applications onto the screen of the first GPU, with it being configurable by the client, and just to handle the rendering side."

  Read the article

• What are the advantages of GLSL's compilation model?

  - by Kos

  GLSL is fundamentally different from other shader solutions because the server (GPU driver) is responsible for shader compilation. Cg and HLSL are (afaik) generally compiled a priori and sent to the GPU in that way. This causes some real-world practical issues: many drivers provide buggy compilers compilers differ in terms of strictness (one GPU can accept a program while another won't) also we can't know how the assembler code will be optimised What are the upsides of GLSL's current approach? Is it worth it?

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >