Search Results

Search found 2690 results on 108 pages for 'ping pong'.

Page 13/108 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Can't ping IPs for devices not part of Windows Domain

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

  Read the article

• Server not responding to SSH and HTTP but ping works

  - by yes123

  Hello guys, I requested an hard reboot because none of ssh and http worked. Ping worked normally. Which logs should i check to understand what was the problem? Thanks! (debian 6 on lamp) Edit: my memory and swap: Mem: 4040068k total, 1114920k used, 2925148k free, 109212k buffers Swap: 1051384k total, 0k used, 1051384k free, 283820k cached 4 GB ram (and more than 1TB of HDD) The cause is from 2 days ago: look how the usage of swap goes +60% in less than 10hours My control panel reports this as top 5 memory usage process: If every apache2 process is 190MB large that sux because IF i do TOP i have 262 sleeping process most of them are apache2! My apache mpm_prefork settings are: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 ServerLimit 1500 MaxClients 1500 MaxRequestsPerChild 2000 </IfModule> KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 4

  Read the article

• Dns works, can ping, but cannot load web pages in browser

  - by user1224595

  Yesterday I changed routers, and my desktop computer started acting up. I could ping websites, and nslookup was able to resolve names to addresses, but neither chrome, firefox, nor ie could load any webpages. None of my other computers connected to the same wireless router have any problems. I connect my desktop to the router through a cheap wifi dongle. I did a wireshark capture of the browser request, and I have uploaded the pcap here. https://drive.google.com/file/d/0B7AsPdhWc-SwbTV0bUJLQXo4UUE/edit?usp=sharing One strange thing I noticed was the spamming of ssdp packets. I am not super familiar with networking, but it seems that it is not a problem with the router, as dns works, and so does dhcp (the desktop is assigned an address correctly). Any help would be appreciated.

  Read the article

• Ping reply not getting to LAN machines but getting in Linux router Gateway

  - by Kevin Parker

  I have configured Ubuntu 12.04 as Gateway machine.its having two interfaces eth0 with ip 192.168.122.39(Static) and eth1 connected to modem with ip address 192.168.2.3(through DHCP). ip-forwarding is enabled in router box. Client machine is configured as: ip address 192.168.122.5 and gateway 192.168.122.39 Client machines can ping router box(192.168.122.39).but when pinged 8.8.8.8 reply is not reaching Client machines but in the tcpdump output on gateway i can see echo request for 8.8.8.8 but never echo reply.Is this because of 122.5 not forwarding request to 2.0 network.Can u please help me in fixing this.

  Read the article

• Ping or accessing WAN IP from LAN results in failure on only one box

  - by ComputerUserGuy

  Morning/evening gents. I purchased a radical domain name today to set up a name for my services and to set up SSL. I configured the SSL fine and all but when I went to my website I couldn't connect. I can connect to the site with any other device in my house and my friend can connect to it as well from outside of the LAN. I am hosting the services with my computer and I can't access the service. Whenever I ping it using the command prompt I get a result of "General Failure.". It saddens me that they couldn't make a better message as it kind of brings me down. I'm not sure what's the deal here as I have all of my firewalls down and my ports are forwarded. Running Windows 7. Thanks for the assistance chaps.

  Read the article

• ping ip's / hostname in app engine

  - by ed1t

  I'm trying to ping an ip address and telnet to some port from an app hosted on app engine. I've tried using http://svn.pylucid.net/pylucid/CodeSnippets/ping.py but for some reason it failing Thanks

  Read the article

• A "tinkered" PC can ping by IP, not by hostname. How to fix?

  - by aitchnyu

  Like this: root@tis-server:~# ping www.google.com ping: unknown host www.google.com root@tis-server:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=55 time=50.3 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=55 time=65.4 ms It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. It also makes route add default gw 192.168.0.1 necessary for each reboot to atleast ping by IP. How do I fix this? It is Ubuntu 11.10 As requested: Output of ifconfig: eth0 Link encap:Ethernet HWaddr 48:5b:39:ae:21:98 inet addr:192.168.0.100 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::4a5b:39ff:feae:2198/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13194 errors:0 dropped:0 overruns:0 frame:0 TX packets:5156 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1420596 (1.4 MB) TX bytes:827295 (827.2 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4817 errors:0 dropped:0 overruns:0 frame:0 TX packets:4817 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:377732 (377.7 KB) TX bytes:377732 (377.7 KB) Output of resolv.conf: Output of /etc/network/interfaces: GNU nano 2.2.6 File: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.100 netmask 255.255.255.0

  Read the article

• d-link 4500 - Not visible in tracert

  - by dbasnett

  I can ping my router (192.168.1.1), but it does not show up in the tracert. My router is a d-Link 4500 v1.22. Is it some config item I have missed?

  Read the article

• Mnemonic external IP

  - by Click Ok

  When diagnosing networking problems, I ping to: My local IP My gateway IP An external IP An external domain name Usually, when troubleshooting, the internet is unaccessible, then I need to remember an external IP address. I need any (easy to remember) IP address. By example, google ip is 72.14.204.147. Cool, but it's hard to remember... What external IP you use? Do you have an mnemonic external IP address, then will be easy to remember?

  Read the article

• Junior admin - how to discover/map the network to increase understanding?

  - by Dave

  I am a junior admin and have been tasked with gaining an understanding of the network. The 2nd line team are somewhat condescending so I'd rather not ask them. I know and use some of the servers on the network, so am able to tracert/ping them to see the names/addresses of equipment there are along the way, and gradually build a map, but how do I put the feelers out to find out what's out there if I don't know the names of server etc?

  Read the article

• Loading wordpress admin page prevents and blocks further requests

  - by Auxiliary

  I've installed a Wordpress site on a host (actually I moved it from localhost). The site loads and works perfectly, however if I log in with Admin, the admin page doesn't completely load and all further requests to the server are blocked for about 10 or 15 minutes. I can't even ping to the site. Where could this problem be from? Is it firewall related or...? Any help or idea is greatly appreciated.

  Read the article

• IIS 6 ip address mixup

  - by Jose

  Ok, just wondering if others have experienced the following. We have two websites configured in IIS 6 pointing to two different static IPs for the past couple days website A's IP address began to resolving to website B's ip address. It seemed to happen all of a sudden. When we looked at IIS the IPs looked to be configured correctly but when we would ping the websites both would point to website B's IP. Any ideas?

  Read the article

• How to access this server?

  - by George Edison

  I have a server that I cannot access. At first I thought it was just some temporary failure with the server, but checking from other IP addresses reveals that it is working just fine. It's only my IP address that's failing. So here is what I've tried: nslookup - resolves correctly ping - 100% packet loss using the IP address or domain traceroute - first few hops work, but from about 6 and on, I just get stars Edit: I am using OpenDNS for DNS resolution, and as mentioned above, the problem is not DNS resolution anyway.

  Read the article

• Can connect through Watchguard mobile VPN, but can't ping or access network drives

  - by johnnyb10

  We're having any issue in which some of our employess can no longer connect to our network drives when out of the office. We use Watchguard Mobile VPN (we have a Watchguard Firebox firewall) and the users are able to connect. That is, their status in the the VPN client says "Connected" and they have the correct IP address listed as the VPN Endpoint. The problem is, when they try to map drives, or even ping the IP address of a server on our network, it fails. Last week, we temporarily switched one of our Comcast modems to our backup DSL modem because the Comcast was accidentally shut off by Comcast, and the problem seemed to start around then. We've since switched back and the problem persists, so that doesn't seem to have been it (which makes sense). But we also made other changes at the time that might have thrown something off, although we feel like we've checked them all. Plus, some people can successfully connect to network drives through the VPN. Can someone please suggest some steps to help troubleshoot? We've checked the policies on our Watchguard box, and they seem fine. We've looked at the settings on the Mobile VPN client, but nothing seems like a probable cause. Thanks.

  Read the article

• Outside VPN traffic not able to ping site-to-site VPN remote site

  - by Siriss

  we have two ASA 5510s running 8.4 in a site-to-site VPN setup. All internal traffic is working smoothly. Site/Subnet A: 192.100.0.0 - local Site/Subnet B: 192.200.0.0 - remote VPN Users: 192.100.40.0 - assigned by ASA When you VPN into the network, all traffic hits Site A, and everything on subnet A is accessible. Site B however, is completely inaccessible for VPN users. All machines on subnet B, the firewall itself, etc... is not reachable by ping or otherwise. I know I am missing a NAT rule, and in 8.2, it was easy as pie to setup using ASDM, but now I can't get it for the life of me as 8.4 apparently made a lot of changes to NAT rules. I am not too comfortable in the ASA command line, but if there is a command I need to add or if you could direct me where I can add this in 8.4 ASDM I would really appreciate it. I have tired NAT Exempt, Static NAT, Static NAT Policies, etc... I think I tried all the options. I also might have my interfaces confused with the new look at feel of ASDM. Thank you much in advance and I hope I have been thorough enough.

  Read the article

• DNS requests failing from computers that can ping DNS server

  - by dunxd

  I have a situation where computers in some of our remote offices from time to time lose the ability to use our DNS server (in head office) to resolve hostnames. The offices are connected via VPN using Cisco ASA 5505 (VPNclient config rather than Site to Site). Ping to the IP address of the DNS server works. But nslookup will get a "no response from server" message. Computers in other locations can use DNS fine. This is an intermittent problem. One day/hour it works, another it doesn't. Other offices connected in the same way work when another doesn't. No config changes have been made on routers around the time we see the problem. Some users have reported that the problem goes away after doing a repair connection in Windows XP. I think this could be caused by the DNS cache being flushed as part of this - the Windows DNS cache makes the intermittent problem look less so because it caches failed lookups as well as successful ones. However, it is possible some other aspect of Windows is involved. Windows 7 clients have also had the same problem. Any pointers on deeper troubleshooting, or anyone else found this?

  Read the article

• Internet connection problem,ping ok , but outlook and browsers dont work

  - by Ashian

  Hi, From some days ago I have a big problem on my laptop( run windows xp sp3) When I connect to internet I can ping web sites but when try to browse them some times it work correctly and some times the connection to server intrupted and I have to refresh the page several times. in this case browser show a connection problem immediatly after I click on address bar or a link on page( wihtout any try to connect to server) I use FireFox and opera and both of them have this problem. try another ISP and still I have this problem. I didnt use any proxy server and check the proxy setting. In this case Outlook also can't connect to mail server. this problem anfter some time or after restart windows have been fixed for a while. I check for virus and can't find anything. Is there any idea how can I fix it? UPDATE: Thanks for your responses. I test them , also I use Open DNS setting and that dosent help me. last night I see that my local web application ( such as Adsl modem config web site , and sites that I set up on windows xo IIS ) aslo can't open and Internal Communication error apears ( Opera Message) that didnt relate to DNS settings or Internet connection.

  Read the article

• Ping not working

  - by Nishant

  Ping is not working to and from this IP to my computer. inet addr:10.125.104.4 Bcast:10.125.111.255 Mask:255.255.240.0 My computer is like this Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.125.65.75 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 10.125.64.6 We both CAN reach the common gateway IP , 10.125.96.6 . What should I check ? What is the barrier in sending info if we both have a common gateway that is pingable ? Besides I can login to a intermediate server and ssh to this server also !!

  Read the article

• Mobile app for sysadmins with monitoring and fixing tools(SSH, ping, traceroute) [closed]

  - by Roman

  I present a start-up company which is working on a new mobile tool for system administrators. Our team has released first several versions of Server Auditor which is now just a SSH terminal with special UI approach for touch devices and got quite good feedbacks, e.g. iOS and Android. Now we are thinking about adding extra features to make Server Auditor a tool number one for all system administrators and would like to know your opinion. Main question would you use a tool like Server Auditor with extra features described below: Fast problem fixing - preloaded recipes/snippets, e.g. clean logs, restart a process, reboot etc. Secure user data synchronisation(IP/DNS name, connection options, keys, snippets) across all your devices iPhone and Android. Built-in tools like ping, traceroute, whois System status integration - you can observe information about the system in a friendly way, e.g CPU load, hard drive and RAM usage etc. Monitoring tool integration. Your servers are watched by our Nagios-like system in the cloud and you get notified by push-notifications/SMS. Similar products are Server Density, CopperEgg. If we start to implement features from 1 to 5 when you will be ready to start use it or even potentially pay for it? Can you see any issues that would prevent you from using this kind of system? Thank you a lot for your time, we kindly appreciate it. Looking forward to hear your opinion

  Read the article

• Windows Phone 7.1.1 Ping

  - by Matt

  I am writing an app to connect to a third party application using REST web services. I have a configuration page that asks for an IP, Port, User Name & Password, currently it just blindly assumes you enter the correct details and attempts a connection. I want to create a test routine that goes through and checks off the following steps when setting up the config information Is the IP/Hostname correct (using ping or something) Is the Port correct Is the Username & Password correct then displays the results on screen as it's going so that if it can't connect to the service it's easier to identify where the issue is. To achieve step 1 I would like to use Ping or some equivalent that does not rely on a particular port being open. So I can eliminate dodgy DNS or a typo in the IP/Hostname. I understand from previous questions asked that ping wasn't possible in 7.0 but with Mango the sockets classes have been added in, is it possible now, if so how? If it still isn't possible is there a different way I can achieve step 1?

  Read the article

• focus not going to another button in android

  - by Rajendar

  Hi, I wrote a code for pinging of given URL.It works fine for me.But whenever i clicked on the start ping button, pinging started but that time focus always is on start button and no widget of the screen working that time. After pressing many times it will gives the force close error.If iam giving URL which is not pinging then that time , all the widgets are working fine.After some time i need to stop the pinging by using my stop button.But it is not working.Please give me advise.Iam using Runtime.exec() for ping command in my android.Plz give me advise.

  Read the article

• Wi-Fi connected but can't go to any site

  - by Michael Dy

  My Windows 7 laptop can connect to our Wi-Fi signal, I can sign in on Yahoo! Messenger, but I can't go to any site. I can access the Net on other devices. The issue started a few weeks ago, so I've been troubleshooting since then in vain. There's no virus, and I already used System Restore. In Wireless Network Connection Status, the received activity is greater than the sent activity. I turned off Windows Firewall and still no Net access. My ping tests: How do I fix this?

  Read the article

• Pinging 192.168.1.4 is looking to 192.168.1.2?

  - by BVernon

  When I run the command "ping 192.168.1.4" I am get the following results: Pinging 192.168.1.4 with 32 bytes of data: Reply from 192.168.1.2: Destination host unreachable. Reply from 192.168.1.2: Destination host unreachable. Reply from 192.168.1.2: Destination host unreachable. Reply from 192.168.1.2: Destination host unreachable. Can anyone help me understand why in the world it's telling me that 192.168.1.2 is unreachable when that's not even the ip address I typed in? I'm very confused. Also in case it's relevant, I'm on a workgroup.

  Read the article

• Able to ping but cannot browse after several hours running of my python program

  - by Shane

  It's a GUI program I wrote in python checking website/server status running on my XP SP3, multi threads are used to check different site/server. After several hours running, the program starts to get urlopen error timed out all the time, and this always happens right after a POST request from a server(not a certain one, might be A or B or C), and it's also not the first POST request causing the problem, normally after several hours running and it happens to make a POST request at an unknown moment, all you get from then on is urlopen error timed out. I'm still able to ping but cannot browse any site, once the program closed everything's fine. It's definitely the program causing this problem, well I just don't know how to debug/check what the problem is, also don't know if it's from OS side or my program wasting too many resources/connections(are you still able to ping when too many connections used?), would anybody please help me out?

  Read the article

• remote telnet and email

  - by Mustafa Ismail Mustafa

  This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >