Search Results

Search found 410 results on 17 pages for 'voip'.

Page 13/17 | < Previous Page | 9 10 11 12 13 14 15 16 17  | Next Page >

• WRTU54G-TM T-Mobile@Home router with 3rd party firmware

  - by dlamblin

  I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly?

  Read the article

• pfSense with two WANs, routing skype traffic over a specific WAN

  - by Eric

  I have a pfSense setup with two WANs (WAN1 and WAN2) and one LAN network. The two WANs are setup for failover. However, QoS has recently been an issue for skype calls in our office place (about 30 people) so we want to dedicate WAN2 for skype traffic (we use skype for all voip calls, etc.) As Skype is notoriously difficult to deal with, does anyone have any suggestions on how I should deal with this? A simple rile based on ports will not work, and using layer7 inspection witha skype porfile on all incoming LAN packets doesn't seem like the way to go eiter. here is a related pfsense forum post: http://forum.pfsense.org/index.php/topic,50406.msg268520.html#msg268520

  Read the article

• Samsumg WEP470 bluetooth headset won't work in Windows 7

  - by rob

  I'm trying to use my Samsung WEP470 bluetooth headset with Windows 7 for VOIP apps. When I try to "Add a Bluetooth Device" in the control panel, it detects the headset and installs a driver. However, at the end of driver installation, I see the error message, "This device cannot start. (Code 10)" I'm using the Microsoft Bluetooth transceiver that came with my Microsoft IntelliMouse Explorer for Bluetooth, and the mouse works fine. From other Superuser.com posts, it looks like the headset should just work, as long as I have the Bluetooth transceiver's drivers properly installed. Any ideas what I'm doing wrong?

  Read the article

• Question regarding the SELinux type enforcement file

  - by Luke Bibby

  In my SElinux te file, I define two new types called voice_t and data_t which certain directories will be classified in the fc file (/data/ will be of type data_t and /voice/ will be of type voice_t). I would like the one SELinux policy to be used for all servers in my network, but, some servers will log VoIP data and other servers will be used to log IP data. I only want the voice_t type to be defined on some servers and data_t to be defined on the others - is this possible? I have tried using an if statement with a boolean expression, and then defining the type when the condition is true but this does not seem to work (it tells me there is a syntax error at 'type data_t'' or 'type voice_t;'). Example: if (data_logger) { type data_t; } else { type voice_t; } Any help would be greatly appreciated. Cheers, Luke

  Read the article

• Asterisk - Trying to use call files to create a conference call between two dynamic numbers

  - by Hank

  I'm trying to setup an Asterisk system that will allow me to create a conference call between two dynamic numbers. It seems I can use 'call files' to make Asterisk initiate the call without needing an incoming call - http://www.voip-info.org/tiki-index.php?page=Asterisk+auto-dial+out This example seems to be what I'd need: Channel: SIP/mytrunk/12345678 MaxRetries: 2 RetryTime: 60 WaitTime: 30 Context: callme Extension: 800 Priority: 2 I can generate this file with some scripting language and then place it into the Asterisk Call File folder. The problem I'm having is: How do I call out to two numbers and join them in a conference call? The MeetMe plugin/extension seems to be what I need in terms of conference calling, I'm just unsure as to how I'd use the two together and join them. Also, is it possible to have multiple 2-person conference calls at the same time? Is setting this up as simple as setting aside X amount of 'channels' in the meetme.conf?

  Read the article

• Office communicator voice chat

  - by Gareth Simpson

  My company recently mandated a switch from Skype to Office Communicator for IM / voice chat. While Skype was never the be all and end all of VOIP, it was at least usable. With Communicator, if one person is talking, everyone else is basically silent (or as good as) so a normal conversation is impossible. No one can interrupt anyone else, if two people start talking at once it's a crap shoot who gets to be heard and often the person who is inaudible doesn't know it. There do not seem to be any client side settings to fix this. Is there anything that can be done server side or is it just rubbish?

  Read the article

• If fiber runs 1gig fine, are there any concerns when considering upgrading to 10gig transceivers?

  - by Eric

  We had fiber installed (connecting ~10 buildings) around 5 years ago and it has been working great. The initial setup involved Procurve 2848 and 2824 switches w/ 1gig transceivers. However, lately we have been considering upgrading our network both to increase bandwidth and possibly add VOIP. However, a lot of this is assuming that we can just use pop the existing fiber into 10gig XFP transceivers in better switches and call it a day. If the fiber works fine at 1G does that mean it should be fine for 10gig? If not, how can we confirm that our existing fiber trunks will work, preferably in an affordable fashion?

  Read the article

• How can I apply a DSP to my microphone in windows?

  - by user16315

  I'd like to be able to run my microphone through arbitrary DSP filters--Mostly for compression and amplification, but also noise cancelation would be nice. I'd then like to take that output and put it back in a virtual audio device that I could use as input for skype, mumble, teamspeak, or any other VOIP program. With a program like Virtual Audio cable, I can do the 'fake devices' part but as far as I know it does not allow any kind of filtering inline. Does a program like this exist? Or some combination of programs that can be combined to accomplish this?

  Read the article

• IT Asset Management

  - by CogitoErgoSum

  Our company has grown quite quickly and I am facing new tasks which I did not think I'd need to deal with. Recently we've come ot a point where we have 100+ Devices (Routers, Bridges, Computers, Laptops, VOIP Phones etc). The other day I was quite frightened when I asked for an inventory and no one had one. I want to start tagging all equipment and recording serials to begin tracking our inventory and ensuring we have a proper record of what equipment we have. Does anyone have advice as to how to go about 1. Convincing the higher ups why we need to do this and 2. What software or strategies might work? Keep in mind this is not for furniture, office equipment etc but IT specific equipment. I'm concerned over people 1. Stealing the physical devices and 2. Losing track of configuration data etc in case we'd need to do a wipe and restore

  Read the article

• Sonicwall settings for Polycom TFTP

  - by Michael Glenn

  I'm switching our VoIP phones (Polycom 301s and 501s) to our data network. They were previously segmented to their own network. This means disabling the DHCP on the Trixbox (Asterisk) server and configuring the Sonicwall TZ 210 DHCP to indicate that Trixbox is the TFTP server. The Polycom phones are stating "could not contact boot server". All phones are configured to TFTP and were confirmed working when previously using the Trixbox server for DHCP. Trixbox DHCP is now turned off. I've configured options 66(as String), 128(as IP) and 150(as IP) in DHCP and added them to a TFTP Option Group. I've enabled "Allow BOOTP Clients to use Range" for the Dynamic IP range and assigned the Option Group TFTP as the DHCP Generic Option Group. Any idea what I'm missing? Is there a separate tool to inspect the DHCP response to compare Trixbox to the Sonicwall?

  Read the article

• Server Fax Farm - Need suggestions, or advice

  - by Mike Curry

  We're Looking at creating a large fax farm via T.38 (Fax over Voip - hundreds of incoming and outgoing faxes) on linux servers, anyone have any suggestions on what is available? All my searches return using Asterisk 1.6.x with a commercial product from Digium called "Fax for Asterisk" (with required purchase of "channels" at $38.00 per channel). There must be an open source project out there I can't seem to find. Suggestions welcome! Here is some additional info: We're using Ubuntu 9.10, and planning to use T.38 If I have missed anything, let me know.

  Read the article

• Internet connection very slow after Linksys configuration

  - by NLV

  Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

  Read the article

• trying to install Mumble on centos

  - by ErocM

  I am trying to install mumble on my CentOS vps following these directions: http://www.hosting.com/support/linux/install-the-mumble-voip-server-to-redhat-or-centos When I get to this line: rpm2cpio mumble-server-1.2.2-3mdv2011.0.x86_64.rpm > file.lzma lzma -d file.lzma I am getting this error: root@vps-1112788-12524 [/home/~~~~/mumble]# rpm2cpio mumble-1.2.4-0.20120422.1-mdv2012.0.x86_64.rpm > file.lzma root@vps-1112788-12524 [/home/~~~~/mumble]# lzma -d file.lzma lzma: file.lzma: File format not recognized I did update the name of the file since the link they gave me was not available. I got the new rpm from the same place: http://www.rpmfind.net/linux/rpm2html/search.php?query=mumble+server&submit=Search+... I'm new to Linux so I have no idea what I'm doing wrong. Can anyone help me out?

  Read the article

• What is your IT-department to staff ratio?

  - by Bart Silverstrim

  This is a topic that may be rather political but it related to system administration still...how many people do you have supporting your users in your IT department? We have three people supporting something near 1500 systems and around 2400 people and a recent question was raised about why we have long times to get systems replaced, repaired, work orders fulfilled, etc. along with the system admin duties of maintaining the servers (mail, proxy, filters, VOIP, wireless, backup, etc.) Does anyone have numbers on what the "best practices" average is of support people to employees in an organization? EDIT:...from some of the answers that are appearing I'm starting to feel depressed...

  Read the article

• Planning home network

  - by gakhov

  I'm planning to setup my home network from scratch and want to ask professional opinions or tips. My home is connected to Internet with a cable connection (100 Mb/s). The devices I would like to connect are VoIP phone (RJ-45), TV (WiFi/LAN), 3 laptops (WiFi), 2 smartphones (WiFi), an iPad (WiFi), a Kindle (WiFi), a network printer and, probably, a home media storage (WiFi/LAN). As you can see, the most load will be on WiFi connections (probably, even if TV supports WiFi it's better to connect it by LAN?). So, I need help to choose the best router (or combination of routers) to support stable connections for all these devices and minimize the total number of routers/adapters. I like how Cisco/Linksys devices were working for me in the past, so preferably (but not obligatorily) I want to setup network with their solutions. Any thoughts?

  Read the article

• wifi routers and concurrent devices

  - by Joelio

  We have a Linksys WRT54G WiFi router in our office which was working great when we had 5-6 folks. Now on peak days we have 10-15 people, each with a computer, smartphone, etc, and an ooma VOIP device. On average 1-2 times a day I need to go hard reboot the router, and sometimes the border router (Cox-supplied device). I assume this is just because the router cant handle this many concurrent users. So my question is can these consumer routers handle this kind of load? If not, would adding more devices solve the problem, and how close proximity can I put 2 routers without having interference problems (our office area is not that big physically)?

  Read the article

• A home router for torrents, gaming, webbing and detailed QoS [closed]

  - by Cawas

  I want to plug in an external HD on it to torrent up never ending (mostly for seeding), with lowest priority. It should even automatically completely stop if it disturbs my net usage, and go back in later. And I want to be able to give gaming (or my computer) the highest priority, because of its ping requirements. It should be above even of Skype and any voip, which also have high priority. Web surfing and "youtubing" comes in the middle - it won't matter much if it delays a second or two. Finally, interface as simple as possible. It's fine if it's command line setup, but it needs to have a GUI. What are my options for routers / firmwares as described? Maybe Gargoyle? Or even Time Capsule? It seems to me good old DD-WRT isn't the best option out there anymore. I wonder what else could cover these grounds.

  Read the article

• Why do partially failed/failing switches fail to pass DHCP?

  - by David Mackintosh

  I've noticed this several times: a switch starts to behave oddly. Usually if the switch doesn't fail outright, what tends to get noticed is that DHCP doesn't work. We had a Linksys SRW-224P fail today. Systems which were still connected worked properly, until it came time to renew their DHCP lease. Once the lease expired, they stopped working, but up until then we couldn't detect a failure. This includes PoE VoIP phones -- they work fine until their lease is up, at which point they're done. I've noticed this on the above-mentioned Linksys, three varieties of 3Com, and possibly half a dozen dumb switches. What is it about DHCP that makes it sensitive to failing switches?

  Read the article

• Squid Proxy Server: limit total bandwidth

  - by Pitto

  Hello my dear friends! We have a marvellous squid proxy with dansguardian for filetering and they both work just great. Is there any easy way to limit the total bandwidth usage? I'd like to set the max amount of squid users internet use to 1200 since our total band is 2000 and I need the rest to ensure other services such as voip to work without hiccups related to huge downloads on the "internet side" of our connection and similar issues. I mean a total squid bandwidth limitation and not a user-based. Fair thanks to everybody.

  Read the article

• Home PBX to answer/take external calls via PSTN

  - by ageis23

  I have a Thomson 585V6 router which has built in voip support. I want to be able to use a softphone to make calls. for example phone my dad's mobile. Any incomming calls to my normal bt number should be taken via my pc as well. What I have done so far: I've wired the pstn port on the router to the telephone jack. The router is connected to my pc. I have installed asterisk on the pc I want to take calls on. The sip client authenticates to the sip server. output from twinkle: Sun 22:46:45 home, registration succeeded (expires = 3600 seconds) how do I take external calls/ answer incoming calls from pstn?

  Read the article

• Are VLANs necessary for my environment?

  - by kleefaj

  Greetings. I'm the new network manager for a school. I've inherited an environment made up of several Windows servers, about 100 Windows clients, ten printers, one Cisco router, six Cisco switches, and 1 HP switch. Also, we're using VoIP. There are four floors in our building. The hosts on each floor are assigned to a separate VLAN. An office on the first floor has its own VLAN. All the switches are on their own VLAN. The IP phones are on their own VLAN. And the servers are on their own VLAN. For the number of hosts on the network, are all these VLANs really buying me anything? I'm new to the VLAN concept but it seems overly complicated for this environment. Or it's genius and I just don't get it. Any thoughts? Thanks, Jeff

  Read the article

• DD-WRT Router Can't hold a connection after initial setup...

  - by AC

  Struggeling with my new DDWRT router (Buffalo WZR-HP-G300NH) configuration. I configured it using one machine while comparing the settings on my existing Linksys WRT54GL on another machine. To the best of my knowledge, I've set it up the same way as my Linksys, but DDWRT has so many other options. After configuring it, I plugged it into the modem, VOIP device & my network. I see the phones come back online. However after a few minutes, it seems I lose the outbound connection (phones die and I can't get out over HTTP). What's confusing me is it works for a few minutes, then it fails. No idea what to look for. Ideas?

  Read the article

• Cannot connect to internet with Clearwire modem.

  - by ide

  I'm currently using a Motorola WiMAX modem (CPEi 25725) and cannot connect to the internet. I can connect to the modem at 192.168.15.1 and check its status. It says that it has good/excellent connectivity to the internet and shows all five signal bars. Additionally it has sent and received some WiMAX packets so I believe it is connected to a tower. I'm at a loss for what the problem is. Unplugging the modem, restarting it from software, and restarting my computer (Windows 7) have not helped. Windows still reports that it is not connected to the internet. Alternatively, could this be an ISP issue? I have heard that Clearwire is a not-so-reputable ISP that blocks VoIP, and I was using Skype recently.

  Read the article

• What are good and bad jitter times for a LAN

  - by garyb32234234

  Ive just ran jperf (frontend to iperf) on our network between 2 workstations, its recorded jitter between 0.033ms and 0.048ms. Is this good or bad? Are there more variables that i would need to consider to make the decision? EDIT: TCP/IP Ethernet LAN 43 PCs 1 server, 100Mbits main switch, various small 8 port switches, test was done using UDP, Its a Windows Domain. I want to instal a few voip softphones on the workstations, see how many i can use that reliably work, im testing a few different workstations around the network to see where the best quality network paths are. Will also change some equipment if i identify bad connections.

  Read the article

• Planning office network [closed]

  - by gakhov

  I'm planning to setup my office network from scratch and want to ask professional opinions or tips. My office is connected to Internet with Cable connection (100Mb/s). The devices i would like to connect are VoIP Phone (RJ-11), TV (WiFi/LAN), 3 laptops (WiFi), a few smartphones (WiFi), iPad (WiFi), Kindle (WiFi) and, probably, MediaServer (WiFi/LAN). As you can see, the most load will be on WiFi connections (probably, even if TV supports WiFi it's better to connect it by LAN?). So, i need help to choose the best routers combination (or even one?) to support stable connections for all these devices and minimize the total number of routers/adapters. Any thoughts? Thank you!

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17  | Next Page >