Search Results

Search found 10759 results on 431 pages for 'auto detect'.

Page 130/431 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• WICD Network Manager does'nt work in 13.10

  - by Jayakumar J

  I am currently making use of a Wired Broadband, where in the default Network Manager though shows that the Auto Ethernet is connected, I was unable to browse through any websites in the browser. I had to disconnect & connect the Auto Ethernet several times in the Network Manager or restart Ubuntu to get it fixed. But following these steps is quiet annoying as this issue happens very frequently. I browsed through the internet and got to know that WICD Network Manager fixes this issue. Earlier I have been using Ubuntu 12.04 where the same issue was fixed by making use of WCID Network Manager. Recently I upgraded to 13.10 and as I got the same network issue in default Network Manager, I have installed WICD Network Manager but when I try to open WCID, I get an alert message saying, "Could not connect to wicd's D-Bus interface. Check the wicd log for error messages." When I click on OK, I get the same message again and when I click on OK again I get the following message, "Error connecting to wicd service via D-Bus.Please ensure the wicd service is running." Any help to fix this issue is greatly appreciated as this issue was annoying me since I installed 13.10

  Read the article

• Getting Xbox Live via a wired network with my laptop that has internet access wirelessly

  - by Alex Franco

  I'm running the latest version (as of yesterday anyways) of Ubuntu Desktop 64bit, but installed on my laptop if it makes a difference. I had Windows 7 preinstalled when i bought it and it worked fine with the wireless from my house and bridging the connection with a LAN to my xbox for Live. Now with Ubuntu I tried the same setup, but I'm unfamiliar with Ubuntu so I didn't get far. Best I got so far is wireless internet on my laptop and a wired connection to the xbox that continually connects and disconnects. Heres my network settings. if theres fields not included its because theyre empty on mine or theyre my MAC address or network password Wireless Network 1 settings: Connect Automatically: Checked. Available to all Users: Checked Wireless: SSID: Franco's Mode: Infrastructure MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Wired Network 1: Connect Automatically: Checked Available to all Users: Checked Wired: MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Any help would be greatly appreciated. EDIT: 6:26pm It seems to be staying connected now. Doing the Network test on my xbox it pickups the network, but cannot detect any PC. Restarting the Xbox, however, leaves my computer unable to connect bringing up the Wire Network disconnected 'blip' every minute or so again. Before I had restarted the Xbox it said "Connected 100 MB/s". Now it only says "connecting". I did have my computer and xbox on in this Wired Network Disconnected blip cycle for a long period of time so it may have finally connected, just without the ability to detect my laptop. I left for 2 hours or so in the middle of typing up the original question. I finished posting this when i got back and then tried to mess with it a bit again, in case youre wondering why i didnt include this before... I've said too much. Forgive my long-winded fingers :p

  Read the article

• how to find and filter blobs from segment image using python?

  - by Python Team

  Am trying to detect number plate from an image.I have converted an image to grayscale and segment image. Now i have to find and filter blobs from an image and to detect number plate from an image. I will explain what i did.. I jus read segment image license_plate = cv2.imread('license1_segmented.png',cv2.CV_LOAD_IMAGE_COLOR) license_plate_size = (license_plate.shape[1], license_plate.shape[0]) mask = cv2.cv.CreateImage (license_plate_size, 8, 1) cv2.cv.Set(mask, 1) thresh_image_ipl = cv2.cv.CreateImage(license_plate_size, cv2.cv.IPL_DEPTH_8U, 1) cv2.cv.SetData(thresh_image_ipl,thresh_image.tostring(),thresh_image.dtype.itemsize * 1 * thresh_image.shape[1]) min_blob_size = 100 # Blob must be 30 px by 30 px max_blob_size = 10000 threshold = 100 **myblobs = CBlobResult(thresh_image_ipl,mask, threshold, True)** myblobs.filter_blobs(min_blob_size, max_blob_size) blob_count = myblobs.GetNumBlobs() trying to find and filter blobs from an image.But am getting error while passing the parameters to CBlobResult which i highlighted above code.I mentioned the error below what i get while passing. Traceback (most recent call last): File "rectdetect1.py", line 110, in <module> myblobs = CBlobResult(thresh_image_ipl,image_area, threshold, True) File "/home/oomsys/pyblobs-read-only/blobs/BlobResult.py", line 92, in __init__ this = _BlobResult.new_CBlobResult(*args) NotImplementedError: Wrong number or type of arguments for overloaded function 'new_CBlobResult'. Possible C/C++ prototypes are: CBlobResult::CBlobResult() CBlobResult::CBlobResult(IplImage *,IplImage *,int,bool) CBlobResult::CBlobResult(CBlobResult const &) Anyone help me to find out the erros and to solve this and all... Thanks in advance...

  Read the article

• jerky walljump in unity rigidbody2d

  - by Lilz Votca Love

  hey there i know people have encountered issues with it before i looked upon the different solutions provided but i couldnt get any fix at all.im making a 2d game and am stuck with the walljump.i detect the wall wonderfully i also detect the jump and it works the player jumps off the wall when facing right with the use of rigidbody.addforce(new vector2(-1,2)*jumpforce) now when jumping on the oposite wall using the same vector with the sign in x axis changed to 1,the player jumps too but it goes more in the y axis than it should.Here is an image to show you the curves it(the player) follows. check the following url to see the behaviour https://scontent-b-mad.xx.fbcdn.net/hphotos-xpf1/t1.0-9/1470386_10152415957141154_156025539179003805_n.jpg voila the green one is happennig when player faces right and the other one happens when he is not here is the section of code if (wall) { if (wallJump) { if (facingRight) { rigidbody2D.velocity = Vector2.zero; flip (); rigidbody2D.AddForce (new Vector2 (-1f, 2f) * Jumpforce / 1.5f); Debug.Log ("saut mural gauche" + new Vector2 (-1f, 2f) * Jumpforce / 1.5f); } else { rigidbody2D.velocity = Vector2.zero; flip (); rigidbody2D.AddForce (new Vector2 (1f, 2f) * Jumpforce / 1.5f); Debug.Log ("saut mural droit--" + new Vector2 (Mathf.Sign (1f), 2f) * Jumpforce / 1.5f + "jump" + jump); } } } else { wallJump = false; } here the code is not optimized yet but i assure you it works so guys any help would be so awesome!! thanks

  Read the article

• Effective way to check if an Entity/Player enters a region/trigger

  - by Chris

  I was wondering how multiplayer games detect if you enter a special region. Let's assume there is a huge map that is so big that simply checking it would become a huge performance issue. I've seen bukkit (a modding API for Minecraft servers) firing an Event on every single move. I don't think that larger games do the same because even if you have only a few coordinates you are interested in, you have to loop through a few trigger zone to see if the player is inside your region - for every player. This seems like an extremely CPU-intense operation to me even though I've never developed something like that. Is there a special algorithm that is used by larger games to accomplish this? The only thing I could imagine is to split up the world into multiple parts and to register the event not on the movement itself but on all the parts that are covered by your area and only check for areas that are registered in the current part. And another thing I would like to know: How could you detect when someone must have entered a trigger but you never saw him directly in it since his client only sent you an move packet shortly before entering and after leaving the trigger area. Drawing a line and calculate all colliding parts seems rather CPU intensive if you have to perform it every time.

  Read the article

• Use Network-Manager to Connect to a wifi Access Point on the command-line

  - by Stefano Palazzo

  I'd like to connect to a wireless access point from the command-line. ideally, I'd only need the name of the AP. But the hardware-address would work as well. I know I can use nmcli to connect to a managed network connection, but in my case, the access point may not be configured for Network-Manager yet (See the difference between the output of nm-tool and nmcli con). Example output of nmcli: Auto pwln 3a3d62b1-bbdf-4f76-b4d2-c211fd5cfb03 802-11-wireless [...] Wired Network aa586921-accf-4932-98c4-c873c310f08e 802-3-ethernet [...] Cisco-UDP Uni 7f94847b-04dc-40b7-9955-5246fb77cc65 vpn [...] T-mobile (D1) 867f345a-cbbf-4bd4-b883-a5e5ae0932f0 gsm [...] Example output of nm-tool: State: connected - Device: eth1 [Auto pwln] ---------------------------------------------------- [...] Wireless Access Points (* = current AP) *pwln: Infra, [...], Freq 2472 MHz, Rate 54 Mb/s, Strength 80 WPA WPA2 WLAN: Infra, [...], Freq 2422 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 [...] How do I connect to an access point that may or may not be known to NM? Extra: Finding out if the connection needs a pass-phrase, and submitting it on the command-line as well would be great too (that is to say It'd be nice if network-manager wouldn't pop open any keyring dialogues or errors on the gui)

  Read the article

• How do I structure code and builds for continuous delivery of multiple applications in a small team?

  - by kingdango

  Background: 3-5 developers supporting (and building new) internal applications for a non-software company. We use TFS although I don't think that matters much for my question. I want to be able to develop a deployment pipeline and adopt continuous integration / deployment techniques. Here's what our source tree looks like right now. We use a single TFS Team Project. $/MAIN/src/ $/MAIN/src/ApplicationA/VSSOlution.sln $/MAIN/src/ApplicationA/ApplicationAProject1.csproj $/MAIN/src/ApplicationA/ApplicationAProject2.csproj $/MAIN/src/ApplicationB/... $/MAIN/src/ApplicationC $/MAIN/src/SharedInfrastructureA $/MAIN/src/SharedInfrastructureB My Goal (a pretty typical promotion pipeline) When a code change is made to a given application I want to be able to build that application and auto-deploy that change to a DEV server. I may also need to build dependencies on Shared Infrastructure Components. I often also have some database scripts or changes as well If developer testing passes I want to have an manually triggered but automated deploy of that build on a STAGING server where end-users will review new functionality. Once it's approved by end users I want to a manually triggered auto-deploy to production Question: How can I best adopt continuous deployment techniques in a multi-application environment? A lot of the advice I see is more single-application-specific, how is that best applied to multiple applications? For step 1, do I simply setup a separate Team Build for each application? What's the best approach to accomplishing steps 2 and 3 of promoting latest build to new environments? I've seen this work well with web apps but what about database changes

  Read the article

• 2D Collision masks for handling slopes

  - by JiminyCricket

  I've been looking at the example at: http://create.msdn.com/en-US/education/catalog/tutorial/collision_2d_perpixel and am trying to figure out how to adjust the sprite once a collision has been detected. As David suggested at XNA 4.0 2D sidescroller variable terrain heightmap for walking/collision, I made a few sensor points (feet, sides, bottom center, etc.) and can easily detect when these points actually collide with non-transparent portions of a second texture (simple slope). I'm having trouble with the algorithm of how I would actually adjust the sprite position based on a collision. Say I detect a collision with the slope at the sprite's right foot. How can I scan the slope texture data to find the Y position to place the sprite's foot so it is no longer inside the slope? The way it is stored as a 1D array in the example is a bit confusing, should I try to store the data as a 2D array instead? For test purposes, I'm thinking of just using the slope texture alpha itself as a primitive and easy collision mask (no grass bits or anything besides a simple non-linear slope). Then, as in the example, I find the coordinates of any collisions between the slope texture and the sprite's sensors and mark these special sensor collisions as having occurred. Finally, in the case of moving up a slope, I would scan for the first transparent pixel above (in the texture's Ys at that X) the right foot collision point and set that as the new height of the sprite. I'm a little unclear also on when I should make these adjustments. Collisions are checked on every game.update() so would I quickly change the position of the sprite before the next update is called? I also noticed several people mention that it's best to separate collision checks horizontally and vertically, why is that exactly? Open to any suggestions if this is an inefficient or inaccurate way of handling this. I wish MSDN had provided an example of something like this, I didn't know it would be so much more complex than NES Mario style pure box platforming!

  Read the article

• Backup Failed, need help not failing

  - by Costa

  Backup (Deja Dup) failed to do an initial backup to my Amazon S3, and despite my best Googling efforts, I could not find a solution : ( Here's the error message: BackendException: Error uploading s3+http://deja-dup-auto-akiaiksyiqi3buaaz26a/My-Archive/duplicity-full.20130805T143807Z.vol1.difftar.gpg I'm running Ubuntu 12.04 LTS on a System76. The folder I'm trying to backup to in S3 is set to store as Amazon Glacier Storage. Any help would rock! Update: better debugging info: DUPLICITY: . Failed to create bucket (attempt #1) 'deja-dup-auto-axxxxxxxxxxxa' failed (reason: S3ResponseError: S3ResponseError: 403 Forbidden DUPLICITY: . <?xml version="1.0" encoding="UTF-8"?> DUPLICITY: . <Error><Code>SignatureDoesNotMatch</Code><Message>The request signature we calculated does not match the signature you provided. Check your key and signing method.</Message><StringToSignBytes>47 00 54 0a 0a 0a 4d 6f 6e 00 20 30 35 20 00 75 67 20 32 30 31 00 00 35 00 32 34 3a 31 32 20 47 4d 00 0a 2f 64 65 6a 61 2d 64 75 70 2d 61 75 74 6f 2d 61 6b 69 00 6b 73 79 69 71 69 33 62 75 61 00 7a 32 36 61 2f</StringToSignBytes><RequestId>8000000000003</RequestId><HostId>Uxxxxxxxxxxxxxxxxx/xxxxxxxxxxxxxxxxRF</HostId><SignatureProvided>yxxxxxxxxxxxxxxxxxxxxx</SignatureProvided><StringToSign>GET

  Read the article

• C++11 Tidbits: access control under SFINAE conditions

  - by Paolo Carlini

  Lately I have been spending quite a bit of time on the SFINAE ("Substitution failure is not an error") features of C++, fixing and tweaking various bits of the GCC implementation. An important missing piece was the implementation of the resolution of DR 1170 which, in a nutshell, mandates that access checking is done as part of the substitution process. Consider: class C { typedef int type; }; template <class T, class = typename T::type> auto f(int) - char; template <class> auto f(...) -> char (&)[2]; static_assert (sizeof(f<C>(0)) == 2, "Ouch"); According to the resolution, the static_assert should not fire, and the snippet should compile successfully. The reason being that the first f overload must be removed from the candidate set because C::type is private to C. On the other hand, before the resolution of DR 1170, the expected behavior was for the first overload to remain in the candidate set, win over the second one, to eventually lead to an access control error (*). GCC mainline (would be 4.8) finally implements the DR, thus benefiting the many modern programming techniques heavily exploiting SFINAE, among which certainly the GNU C++ runtime library itself, which relies on it for the internals of <type_traits> and in several other places. Note that the resolution of the DR is active even in C++98 mode, not just in C++11 mode, because it turned out that the traditional behavior, as implemented in GCC, wasn't fully consistent in all the possible circumstances. (*) In practice, GCC didn't really implement this, the static_assert triggered instead.

  Read the article

• How do I make time?

  - by SystemNetworks

  I wanted to output a text for a certain amount of time. One way is to use threads. Are there any other ways? I can't use threads for slick2d. This is my code when I use threads for slick: package javagame; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.Image; import java.util.Random; import org.newdawn.slick.Input; import org.newdawn.slick.*; import org.newdawn.slick.state.*; import org.lwjgl.input.Mouse; public class thread1 implements Runnable { String showUp; int timeLeft; public thread1(String s) { s = showUp; } public void run(Graphics g) { try { g.drawString("%s is sleeping %d", 500, 500); Thread.sleep(timeLeft); g.drawString("%s is awake", 600,600); } catch(Exception e) { } } @Override public void run() { // TODO Auto-generated method stub run(); } } It auto generates a new run() And also when I call it to my main class it has stack overflow!

  Read the article

• Detecting Browser Types?

  - by Mike Schinkel

  My client has asked me to implement a browser detection system for the admin login with the following criteria, allow these: Internet Explorer 8 or newer Firefox 3.6 or newer Safari 5 or newer for Mac only And everything else should be blocked. They want me to implement a page telling the user what browser they need to upgrade/switch to in order to access the CMS. Basically I need to know the best way to detect these browsers with PHP, distinct from any other browsers, and I've read that browser sniffing per se is not a good idea. The CMS is WordPress but this is not a WordPress question (FYI I am a moderator on the WordPress Answers site.) Once I figure out the right technique to detect the browser I'm fully capable to make WordPress react as my client wants, I just need to know what the best ways are with PHP (or worse case jQuery, but I much prefer to do on the server) to figure how what works and what doesn't. Please understand that "Don't do it" is not an acceptable answer for this question. I know this client too well and when they ask me to implement something I need to do it (they are a really good client so I'm happy to do what they ask.) Thanks in advance for your expertise. -Mike

  Read the article

• Nvidia dual monitor configuration gets lost every time I reboot

  - by sunwukung

  I've recently updated (well, borked then completely reinstalled) to 12.04. I'm running a dual monitor setup, with a Dell U2410 / Dell 2007WFP combination on an HP Elite Book 8560W. The graphics card is an NVIDIA GF108 [Quadro 1000M]. My problem is as follows. I can get the dual monitor setup working fine, but every time I reboot, my machine appears to lose the settings (specifically, the U2410 is disabled, the mouse pointer is locked in the launcher). I have to restate the settings after every launch. I've tried running nvidia-settings as sudo, I've save the changes to my xorg.conf file (see below) but nothing seems to be sticking. Has anyone had similair issues, or know of a fix? Conf file follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2007WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1680x1050 +1920+0, DFP-1: 1920x1200 +0+0; CRT: nvidia-auto-select +0+0, DFP-1: NULL" SubSection "Display" Depth 24 EndSubSection EndSection The error message I'm getting is this: none of the selected modes were compatible with the possible modes: Trying modes for CRTC 642: CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1)

  Read the article

• Cat 6 Only 100mbit speed

  - by Stu2000

  I tried two different cat6 cables directly connected between my two ubuntu machines. This one I ordered online: http://www.amazon.co.uk/gp/product/B002SQPDXS/ref=wms_ohs_product only achieves 100mbit speeds, but does appear to be supporting cross-talk (direct pc to pc), the other cat 6 cable, worked perfectly and gets the full 1gigabit speed. Both tests were performed using ftp and checking the network monitor with direct pc to pc connection. Did the product from amazon lie to me or do I need to manually set a setting somewhere in ubuntu for some cables? I had thought 10 quid for 20m of gigabit ethernet cable was a bit cheap, you get what you pay for... Regards, Stu Update: It seems that after rebooting, the device is set to 1000mbit sec when looking it up with sudo ethtool eth0 However after a while, this will drop down to just 100, after which to reset it to 1000 again, I have to reboot, and simply unpugging and re-plugging in the cable doesn't do it. I tried setting this in networking config file as suggested here: auto eth0 iface eth0 inet static pre-up /usr/sbin/ethtool -s eth0 speed 1000 duplex full but that resulted in my networking failing to start. Is there a problem with my 'auto-negotiation' or something? Can I manually override a setting to 1000mbit?

  Read the article

• Struggles to connect to network when using WPA with a BCM43225

  - by pst007x

  When booting my laptop, it will try to connect to my wireless network, however a window keeps popping up asking me for my security password, which has already been saved. I have to keep deleting my network settings, and reconnecting, otherwise it keeps failing to connect. My wireless is set up with a WPA, I do not want to lower my security because of this, but it is a pain and can take me 15mins plus to finally connect. The problem has only become apparent since a fresh install of 11.10. IPV6 disabled. System info: 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) Subsystem: Acer Incorporated [ALI] Device 036d Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at b3400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 02:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) Subsystem: Broadcom Corporation Device 04da Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at b2400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: wl, brcmsmac ADDITIONAL: In terminal I get this: pst007x@pst007x-ubuntu64:~$ nm-applet start ** Message: applet now removed from the notification area ** (nm-applet:2816): DEBUG: old state indicates that this was not a disconnect 0 ** Message: using fallback from indicator to GtkStatusIcon ** Message: applet now embedded in the notification area ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. ** (nm-applet:2816): DEBUG: foo_client_state_changed_cb Note this line: ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. At this point is where I am asked for the password. Please report WPA issues with Ubuntu 11.10 here: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/892727

  Read the article

• apt-get issue after upgrading to 12.04

  - by user83906

  I have recently upgraded my cluster from 11.10 to 12.04. After the upgrade, I am having trouble running apt-get on the cluster nodes. I can ssh between the nodes (client-to-client; client-to-head; client-to-external etc.). However, sudo apt-get update produces the following errors: Ign http://us.archive.ubuntu.com precise InRelease Ign http://security.ubuntu.com precise-security InRelease Ign http://www.openfoam.org maverick InRelease Ign http://us.archive.ubuntu.com precise-updates InRelease Err http://security.ubuntu.com precise-security Release.gpg Something wicked happened resolving 'security.ubuntu.com:http' (-5 - No address associated with hostname) Err http://www.openfoam.org maverick Release.gpg Something wicked happened resolving 'www.openfoam.org:http' (-5 - No address associated with hostname) Ign http://us.archive.ubuntu.com precise-backports InRelease Ign http://www.openfoam.org maverick Release Ign http://security.ubuntu.com precise-security Release Err http://us.archive.ubuntu.com precise Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) Ign http://security.ubuntu.com precise-security/main Sources/DiffIndex Err http://us.archive.ubuntu.com precise-updates Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) Ign http://security.ubuntu.com precise-security/restricted Sources/DiffIndex 15% [Connecting to us.archive.ubuntu.com] [Connecting to security.ubuntu.com] [Connecting to www.openfoam.org] On the headnode, I have in /etc/network/iterfaces: auto eth0 iface eth0 inet static address 192.168.0.1/24 On the client nodes, I have /etc/network/iterfaces: auto eth0 iface eth0 inet static address 192.168.0.101 netmask 255.255.255.0 gateway 192.168.0.1 Please advise.

  Read the article

• Speaking in Sweden in April

  - by Fabrice Marguerie

  As this is my first post in 2011, I wish you all the best for this new year. I don't know for you, but it will be a year of changes for me. I'll tell you more about that when the time comes. For the time being, I just wanted to announce my next speaking engagement: I'll be presenting at SDC2011, the Scandinavian Developer Conference. This event will take place on April 4 and 5 in Göteborg, Sweden. My session will be based on my article about memory leaks: How to detect and avoid memory and resources leaks in .NET applicationsDuring this session we will analyze the most common leak sources in .NET applications and we will see how to detect them in practice. We will demonstrate with live examples several tools that can help you to troubleshoot your applications. The goal of this session is to help you fix and avoid leaks in your .NET applications, whether they are built with Windows Forms, WPF, Silverlight, ASP.NET, or as console or Windows services. You will also get advices on how to improve your applications so they become less greedy. I hope to see you there if you're around in April :-)

  Read the article

• Ubuntu 12.04 Server ping gateway responds with destination host unreachable

  - by blckblttkd

  I consider myself fairly avid with Ubuntu and Linux, but this one has me stumped. I built up a Xen Server using Ubuntu 12.04 as the base operating system. It has multiple domUs running on it. My home network has a statically defined network where I got all the network connectivity going peachy. The server was moved to a permanent home this morning. So, the network configuration on the main system had to change. Again, another static network, but now I can't ping the upstream gateway from the host. As the VMs use this NIC over a bridge, they too are broken. Ping responds with "destination host unreachable." I simplified the networking down to a simple static network as seen below (no bridge or anything) just to get it to work. Here's the contents of my /etc/network/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 216.7.188.228 gateway 216.7.188.225 netmask 255.255.255.240 broadcast 216.7.188.255 network 216.7.188.0 dns-nameservers 8.8.8.8 8.8.4.4 Here's the contents of route -n 0.0.0.0 216.7.188.225 0.0.0.0 UG 100 0 0 eth0 216.7.188.224 0.0.0.0 255.255.255.240 U 0 0 0 eth0 And the results of pinging the gateway: PING 216.7.188.225 (216.7.188.225) 56(84) bytes of data. From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable Again, this worked in one network flawlessly (obviously with different parameters in the interfaces file). I did try using eth1 (as there are two NICS on the server (in case the MAC address got flipped on bootup). No success there. Yes, the cable is in the right port now :) Any thoughts? I appreciate the help!

  Read the article

• How to connect to a wireless network that has a two word name with a space?

  - by grinan

  Ok, I have searched for some time in earnest for an answer to this question. I have a Beagleboard which has Ubuntu 10.10 Minimal install for Arm running on it. With the default install, minimal tools, no GUI, I am unable to connect to my wireless network. The name of my network is "MYNAME NETWORK". Using a text editor to edit /etc/network/interfaces I can not seem to connect at all. As an experiment, I connected to a friends network, which has a one word name "dystek",and was able to connect with Zero issues, and update and install a full GUI for ubuntu Arm. The problem is that I don't want a full blown gui on the beagleboard, just a minimal install of ubuntu with CLI is all I need or want. Is there anyway to connect to my wireless network via editing the /etc/network/interfaces file. Surely there is... I just don't know how. Right now my interfaces file looks like this: auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.1.200 netmask 255.255.255.0 gateway 192.168.1.1 wireless-essid BARRETT NETWORK wireless-key 46456xxxxxxxx Any help would be appreciated.

  Read the article

• Algorithm to measure how "diffused" 5,000 pennies are in an economy?

  - by makerofthings7

  Please allow me to use this example/metaphor to describe an algorithm I need. Objects There are 5 thousand pennies. There are 50 cups. There is a tracking history (Passport "stamp" etc) that is associated with each penny as it moves between cups. Definition I'll define a "highly diffused" penny as one that passes through many cups. A "poorly diffused" penny is one that either passes back and forth between 2 cups Question How can I objectively measure the diffusion of a penny as: The number of moves the penny has gone through The number of cups the penny has been in A unit of time (day, week, month) Why am I doing this? I want to detect if a cup is hoarding pennies. Resistance from bad actors Since hoarding is bad, the "bad cup" may simply solicit a partner and simply move pennies between each other. This will reduce the amount of time a coin isn't in transit, and would skew hoarding detection. A solution might be to detect if a cup (or set of cups) are common "partners" with each other, though I'm not sure how to think though this problem. Broad applicability Any assistance would be helpful, since I would think that this algorithm is common to Economics The study of migration patterns of animals, citizens of a country Other natural occurring phenomena ... and probably exists as a term or concept I'm unfamiliar with.

  Read the article

• How do I stop sound coming from my speakers with a faulty headphone socket?

  - by Andy

  On my laptop, I have a faulty headphone socket, so when I insert headphones into it, the speakers do not mute. I can confirm that this problem is caused by faulty hardware and not software as when I twist the headphone jack, the speakers come on and off according to the movements. On previous versions of Ubuntu, I worked around this problem by going into alsamixer and disabling "Auto-Mute Mode", and then going into the sound settings and choosing "Analog Headphones". However, on 12.04, no such option exists, rendering my headphones unusable with no way to work around the problem. I momentarily thought I had this problem fixed when I installed PulseAudio Volume Control from the Software Centre. I selected the Output Devices tab, and under "Built-in Audio Analogue Stereo" I selected "Headphones" for the port. However, this almost randomly seems to change back to "Speakers", despite me setting "Auto-Mute Mode" as disabled. Basically, I would like a way to permanently mute the speakers so only the headphones will play sound, without it losing my settings. It is ridiculous that such a simple setting has been taken away to "simplify" the user interface.

  Read the article

• Finding the shorter turning direction towards a target

  - by A.B.

  I'm trying to implement a type of movement where the object gradually faces the target. The problem I've run into is figuring out which turning direction is faster. The following code works until the object's orientation crosses the -PI or PI threshold, at which point it will start turning into the opposite direction void moveToPoint(sf::Vector2f destination) { if (destination == position) return; auto distance = distanceBetweenPoints(position, destination); auto direction = angleBetweenPoints(position, destination); /// Decides whether incrementing or decrementing orientation is faster /// the next line is the problem if (atan2(sin(direction - rotation), cos(direction - rotation)) > 0 ) { /// Increment rotation rotation += rotation_speed; } else { /// Decrement rotation rotation -= rotation_speed; } if (distance < movement_speed) { position = destination; } else { position.x = position.x + movement_speed*cos(rotation); position.y = position.y + movement_speed*sin(rotation); } updateGraphics(); } 'rotation' and 'rotation_speed' are implemented as custom data type for radians which cannot have values lower than -PI and greater than PI. Any excess or deficit "wraps around". For example, -3.2 becomes ~3.08.

  Read the article

• Automated testing tool development challenges (for embedded software)

  - by Karthi prime

  My boss want to come up with the proposal for the following tool: An IDE: Able to build, compile, debug, via JTAG programming for the micro-controller. A Test Suite, reads the code in the IDE, auto generates the test cases, and it gives the in-target unit testing results(which is done by controlling code execution in the micro-controller via IDE). A no-overhead code coverage tool which interacts with the test suite and IDE. My work is to obtain the high level architecture of this tool, so as to proceed further. My current knowledge: There are tool-chains available from the chip manufacturer for the micro-controllers which can be utilized along with an open-source IDE like Eclipse, and along with an open-source burner, a complete IDE for a micro-controller can be done. Test cases can be auto-generated by reading the source file through the process of parsing, scripting, based on keywords. Test suite must be able to command the IDE to control, through breakpoints, and read the register contents from the microcontroller - This enables the in-target unit testing. An no-overhead code coverage should be done by no-overhead code instrumentation so as to execute those in the resource constraint environment of the micro-controller. I have the following questions: Any advice on the validity of my understanding? What are the challenges I will have during the development? What are the helpful open-source tools regarding this? What is the development time for this software? Thanks

  Read the article

• nvidia: switching dvi socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• 12.10 Wireless hotspot configuration and internet browsing - question

  - by Indian

  In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >