Search Results

Search found 30014 results on 1201 pages for 'go yourself'.

Page 131/1201 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

• Boot camp install from a HDD image

  - by Dombou

  How would one go about imaging an old work computer (old IBM aptiva from 2001ish) with Windows XP and lots of stuff (VPN client with settings etc) to a new iMac, while preserving Mac OSX? I can't simply install XP on the iMac and then reinstall/copy across stuff; it NEEDS to be an image. Can you even image smaller HDD's and then place them on large ones, or do they have to be the same size? Recommendations on how I go about this? Edit: It MUST be boot camp. I don't want to virtualize it from within OsX

  Read the article

• Configure browser and VPN traffic

  - by Zachzor

  Hello everyone. I've been having a few issues with my company's VPN server. The VPN is running on a Mac Server (10.6.x) and I'm also using a Macbook (10.6.5). I've been building specific programs to gather information from IPs, and to work on this while I'm at home I need to go through our VPN to access the network. Unless I send all traffic over VPN, I'm not able to hit those specific IPs. However, I'm unable to access the internet through my web browser when I send all my traffic over VPN. I was wondering if there was a way (besides setting up a split tunnel) that I could set up a web browser to go through my current wireless connection, as opposed to going through the VPN like the rest of my applications. Wether the browser be Chrome, Firefox, or Safari doesn't matter to me. Anyone else run into this issue and find a clever way to solve it? Thank you!

  Read the article

• Apache: Serve http traffic over https

  - by Gatsys

  Using apache. I have a demo of a webapp that usually uses https. However, for the demo, I want all traffic to be on http even if a user hits https. I have added the following entry and it works if you go to http:// AAAA.com:443, but doesn't work if you go to https:// AAAA.com. It gives you this error: SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) Here is my current setup: <VirtualHost 111.111.111.1:443> ServerName test.AAAA.com DocumentRoot /var/www/AAAA.com </VirtualHost> How do you redirect the https-http without encountering the SSL error. In other words, turn off ssl for https://

  Read the article

• Batch script to create home home directories from list of names

  - by Steven

  I'm trying to create a home directories with permissions from a text file. I can only get the batch file to run the first line. Can anyone tell me why? I initiate the scripts by running go.bat as administrator. go.bat @echo for /f %%a in (users1.txt) do call test.bat %%a test.bat @echo off m: cd \ mkdir %1 icacls %1 /grant %1:(OI)(CI)M cd %1 mkdir public icacls public /inheritance:d icacls public / All:(OI)(CI)(RD) icacls public /grant All:(OI)(CI)R mkdir private icacls private /inheritance:d icacls private /remove All cd \ users1.txt user1 user2 user3

  Read the article

• nginx rewrite for wikkawiki

  - by Hans

  Just setup WikkaWiki on my server, I have been trying to have the links go from wiki.mysite.info/wikka.php?wakka=Start into wiki.mysite.info/DotMG. I tried following their guide at http://docs.wikkawiki.org/ModRewrite, however it seems incomplete and outdated. Furthermore, as of version 1.3.2 base_url isn't even manually configurable from the wikka.config.php file. I am using version 1.3.2 of WikkaWiki. My nginx virtual hosts file contains: server { listen 80; server_name wiki.mysite.info; root /usr/share/nginx/wikka/; access_log /usr/share/nginx/.access/wikka; error_log /usr/share/nginx/.error/wikka error; location / { index index.php; try_files $uri $uri/ @wikka; } location @wikka { rewrite ^(.*/[^\./]*[^/])$ $1/ last; rewrite ^(.*)$ /wikka.php?wakka=$1 last; } location ~* \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /etc/nginx/fastcgi_params; } } Thus far it works, I can go to wiki.mysite.info/APage and it'll display that page, however it doesn't work on all pages, sometime the browser simply downloads the page (For some reason it always downloads the Start page). Also when I go to wiki.mysite.info/ it downloads the wikka.php file... Furthermore, the links on the wiki have the wikka.php?wakka= so whenever I navigate around the wiki, it goes back to being wiki.mysite.info/wikka.php?wakka=APage. I think something is wrong with my rewrite but I can't say for sure. Contents of the fastcgi_params: fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_FILENAME $request_filename; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param HTTPS $server_https; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200;

  Read the article

• USB HD Freezes Windows Explorer

  - by nfplee

  I recently purchased a "Seagate STBX1000200 1TB Expansion 2.5 inch External Hard Drive". It has been working without problems until recently. When i plug the device into a USB port the device is recognised as it appears in the device manager but when i go to Windows Explorer and try to open it (or right click on it) it hangs/freezes windows explorer. Please note i am using Windows 7 Professional. I have already tried various things without success after searching for people with similar problems. I did read that it could be a problem with how the computer assigns a drive letter. But whrn i go to disk management (when running as an administrator) it hangs and displays the following message: Connecting to virtual disk service I'd appreciate it if anyone could offer some advice. Thanks

  Read the article

• Export to excel - COMMA issue

  - by 6242Y

  I want to put a string in an excel sheet from my Export to excel function. However my string is as follows: string : Red, red wine Go to my head Make me forget that I Still need and on my excel I get unexpected results , column change after comma and also column change when there is no full stop in front of an UPPER CASE alphabet. The Upper case alphabets (without a full stop before them) are also causing this (Go , Make . Still) How can I solve this issue ? I tried removing the spaces after the comma as var desc = ""; if (o.Description.Contains(',')) { var trimmedSplits = new List<string>(); var splits = o.Description.Split(','); foreach (var stringBits in splits) { desc = desc + stringBits.Trim() + ","; } desc = desc.Remove(desc.Length - 1); } dtRow[(int)ProductRangeExportToExcel.Description] = desc;

  Read the article

• Shortcut for enabling / disabling Greasemonkey (or specific script)

  - by ldigas

  talking about firefox here ... I don't use Greasemonkey on any other browser, but if you know, do add info for those as well I use Greasemonkey daily ... having some 20 scripts loaded all the time which save me a ton of grief. But, some of them I sometimes don't need ... few examples: - I use Google Image Status Reporter & Direct Images (links you directly to image file) ... but sometimes I want to go to the page where the image is ... - GReader Minimalist Style ... until I actually need to check the trends and some stuff it hides - there are other examples but these two first sprang to mind, since I just were thinking about that ... To put the long story short ... sometimes I would like a shortcut to disable Greasemonkey, so I don't have to go into the menubar and so on (which I also have half hidden for space) ... anyone knows of any, or how one could create one ?

  Read the article

• Upgrade from "audit mode" (pre-cloning) Windows 8 to Windows 8.1?

  - by Display Name

  I have a Windows 8 in audit mode with a lot of applications installed, custom configurations done, and an answer file prepared, ready to be sysprepped for cloning. How do I upgrade to Windows 8.1, when I can't go into the store (Metro apps don't work in audit mode)? If I run sysprep then create a normal account so I can get the upgrade from the store, I suppose there's no way to go back to audit mode, and that's a huge problem as I want to retain the particular account settings I have configured for the audit mode account as a default account. What do I do??

  Read the article

• Virtualbox PUEL Interpretation

  - by modernzombie

  Sorry if this seems like a lame question but I want to be sure before making a decision. The Virtualbox PUEL license says “Personal Use” requires that you use the Product on the same Host Computer where you installed it yourself and that no more than one client connect to that Host Computer at a time for the purpose of displaying Guest Computers remotely. I take this to mean that if I want to setup a development server (web server) that's only used by me to do my work this falls under personal use. But if I make this server available for clients to connect to the websites to view my progress this is no longer personal use also meaning that using Vbox to run a production web server is also against the license. Again sorry if this is a dumb question but I find it hard to follow the wording used in licenses. I know I could go with OSE but I have not looked into VNC versus RDP yet. Thanks.

  Read the article

• Install Windows with QEMU

  - by Radium

  I want to understand if it is possible to install Windows from Qemu to a physical HDD. I was trying to do that by doing something like this: qemu-system-x64 -m1024 -vnc :1 -hda /dev/sda -cdrom .../Windows.iso Installed successfully. But when i tried to boot normally got a blue screen telling me that a hardware change appeared so go away. I guess the problem is not because of QEMU-CPU emulation or smth, but because of HDD`s UID change which is used inside of Windows registry. Am i right? So if yes how to workaround this? Maybe i need to prepare Windows before the reboot? I have successfully installed FreeBSD via QEMU and thought with Windows it will go the same ...

  Read the article

• Multiple network cards, controlling where my traffic goes

  - by thefinn93

  This is an Ubuntu 12.04 server install. I have multiple network cards, eth0 and eth1 lets call them. eth0 is connected to the internet, and all of my traffic goes through it, until eth1 gets plugged in. Then the machine tries to send everything through eth1, which for various and sundry reasons does not go out to the Interent. The only traffic it doesn't send through eth1 is traffic on eth0's subnet. It also will not accept inbound connections on eth0 from outside of eth0's subnet. I'd like all outbound traffic to go out eth0, but I'd like incoming connections from to either card from any subnet to work.

  Read the article

• apache port number

  - by user983223

  For each development sites I want to have a unique port number. For instance, domain.com:1234 This is what I have in my httpd.conf file. After restart the page domain.com:1234 is not showing in the browser. Is there anything else that I need to do besides what I have already done to make this work? Listen *:1234 <VirtualHost *:1234> DocumentRoot /var/www/dev_sites/test ServerName domain.com:1234 </VirtualHost> It looks like if I go to my local hostname (kk.local:1234) it shows. Is there some sort of dns that I need to do? I really don't want to go into godaddy everytime I add a development site. Is there a way around that?

  Read the article

• Thunderbird: 'reply to sent mail' use-case [closed]

  - by BoD

  I seem to have this use-case quite often: Send a mail to A, with B and C in cc Realize you forgot to say something in the mail. You now want to send a 'reply mail' (including your original mail as quotation) to A, with B and C in cc. To do that: go to the 'Sent mails' folder, and press the 'Reply all' button Problem: Now you have yourself in the 'To:' field, and A, B and C in the cc fields. Question: Is there a better way (maybe an extension?) to do step 4, and correctly have A in the To: field, and B and C in cc.

  Read the article

• How is a nameserver chosen when DNS resolution occurs?

  - by Richard

  I have a few domains hosted on nameservers at Zerigo. Zerigo have 5 nameservers and I have all 5 in the nameserver records for my domains. The nameservers are in different geographical locations (3 in the US, one in London, and one in Amsterdam). When someone goes to a domain of mine and the DNS resolution occurs, how will it choose a nameserver? Will it always go to the nearest geographical one? Will it go to the one with fewest hops? Will it just choose one at random? (This is assuming all 5 are functioning perfectly). Thanks EDIT: And does it make any difference which order I list the nameservers in on the domain name records?

  Read the article

• how to get a decent emacs setup on linux

  - by Hersheezy

  I am currently interested in switching from vim to emacs. One of the more compelling reasons for this is the smooth integration with a unix environment. The most experienced emacs users I have seen have a bash prompt at the bottom of their window, with stdout going to a buffer right above it. They then interact with the output of programs such as grep in interesting ways. I am on Ubuntu 10.04 and the default emacs environment does not seem to do much for me in the way of integration. For example, in the M-x shell mode, output from basic commands like ls produce lots of strange characters and hitting the up arrow does not go to previous commands. Any recommendations on a good direction to go in?

  Read the article

• Why is my library/Documents shortcut showing all files from all subfolders in one flat list?

  - by korro

  I am using Windows Explorer on Windows 7. In My Documents there's a folder 02 KOOP. If I go there using the adress bar: D:\users\username\My Documents\02 KOOP I get a view of my subfolders and some files: However when I use the Documents shortcut under Libraries, and then go to the 02 KOOP folder, all files that are located in all subfolders are listed in one big list. When you view the file properties, the actual location is shown: This is the only subfolder of My Documents that has this behaviour. Did I accidentally change some setting, or is something wrong? Is this some setting I accidentally changed?

  Read the article

• Missing files when Windows 7 returns from hibernate w/ dual boot

  - by Arthur N

  I have a dual-boot setup with Ubuntu (lucid) and Windows 7. I have the Windows file system shared on Ubuntu through Samba. Occasionally, I am working on Windows and my machine will go into hibernate (i.e. when the battery level is critical). By default, my GRUB settings boot me into Ubuntu. So when I get back to my PC, sometimes I just hop into Ubuntu instead of going back to Windows. However, if I write any files to the Windows file system during that Ubuntu session, the next time I do go back to Windows (which resumes from hibernate), those files are missing. Obviously, the state of the actual file system and the hibernate snapshot become out of sync, and Windows chooses the hibernate snapshot, overriding any changes I may have made thru Ubuntu. For now, I've disabled the hibernate option in the Windows power settings, but is there any utility I can use to get back some of those missing files?

  Read the article

• Why does pinging 192.168.072 (only 2 dots) return a response from 192.168.0.58?

  - by George Duckett

  I mistakenly missed the dot off of an IP address and typed in 192.168.072. To my surprise I connected to a machine at 192.168.0.58 If I ping 192.168.072 I get responses from 192.168.0.58. Why is this? I'm on a Windows PC on a Windows domain. If I ping 192.168.72 I get a response from 192.168.0.72, so it seems the 0 in 072 (in my original mistake) is significant. This question was a Super User Question of the Week. Read the blog entry for more details or contribute to the blog yourself

  Read the article

• Acer Aspire 5532 crashes with no warning

  - by keenan

  I have an Acer Aspire 5532. I don't have more specs off the top of my head but from what I've looked up it has all the factory stock stuff in. My keyboard is completely shot and doesn't work at all. It was working fine for quite a while, however I go to get on it Thanksgiving night and all of a sudden it just crashes with no warning. I try to restart it and it beeps 3 times with about 15 seconds in between each beep. After that it will go to start up and get to the log in screen, and about 3 minutes later it will crash again with absolutely no warning. The same thing happens every time I try to start it up. I've taken it completely apart and cleaned the fan and all the airways. I made sure all the connections are good (or at least all the ones that I can get to above the mother board), put it back together and I get the same problem.

  Read the article

• Missing files when Windows 7 returns from hibernate w/ dual boot

  - by Arthur N

  I have a dual-boot setup with Ubuntu (lucid) and Windows 7. I have the Windows file system shared on Ubuntu through Samba. Occasionally, I am working on Windows and my machine will go into hibernate (i.e. when the battery level is critical). By default, my GRUB settings boot me into Ubuntu. So when I get back to my PC, sometimes I just hop into Ubuntu instead of going back to Windows. However, if I write any files to the Windows file system during that Ubuntu session, the next time I do go back to Windows (which resumes from hibernate), those files are missing. Obviously, the state of the actual file system and the hibernate snapshot become out of sync, and Windows chooses the hibernate snapshot, overriding any changes I may have made thru Ubuntu. For now, I've disabled the hibernate option in the Windows power settings, but is there any utility I can use to get back some of those missing files?

  Read the article

• How do I force Windows to play sound through the speakers only when a USB headset isn't connected?

  - by Phoexo

  I'm using a speaker set connected through the green audio jack and a headset which I connect through USB. My problem is that every time I connect/disconnect my headset, I have to go through a lot of settings/restart some programs to make the sound go through the speakers again. What I want is to have audio play through the headset when it's connected, but if I disconnect the headset, I want the audio to automatically play through the speakers. For example, if I connect/disconnect the headset while listening to music, I have to restart the application to make the music play through the correct speaker/headset, and it shouldn't be that inconvenient. (I found this somewhat relevant topic, but the problem is that it doesn't really give an answer. (Also, it is 2 years old.))

  Read the article

• Does searching a keyword on Google make the crawlers look harder in the future?

  - by Foo Bar

  Do the search requests made by the users influence the Google crawlers "attraction" by this keyword? Let's say Google has some hits on a specific keyword in the search index. And now I search for exactly this keyword. Will the Google crawlers react to the search and keep looking more intense for pages that could match this keyword? A reason why this could be important: Privacy when searching yourself. Assume you just want to know how much Google (and thus other people) can find out about you. If now any (statistical) additional search for your name trigger the crawlers even one step harder to find even more about you, it would have the negative effect that you would actually be found easier in the future, even though you had the intention and hope to find out how few Google finds about you. It's a bit like the dillema in quantum mechanis: Does observing the system automatically change the system?

  Read the article

• VMware snapshost issue

  - by Calcgod

  I am using VMware Fusion 2.0 on a Macbook Pro. I have allocated 20GB to a windows partition within VMware, and now wish to expand that. When I go to the settings for the hard drive it tells me: "These settings cannot be changed while the virtual machine has a snapshot. To make changes, first delete all snapshots." When I go to the snapshots settings nothing appears there besides the current state thumbnail. Is there a way to remove these "invicible" snapshots??

  Read the article

• Setting up proxy to handle subdomain requests

  - by PeeHaa

  I have setup a proxy for a site which works with the following nginx config: server { listen 80; server_name proxy.example.com; access_log /dev/null; error_log /dev/null; location / { proxy_pass http://thepiratebay.se; proxy_set_header X-Real-IP $remote_addr; } } However on this there are also styles loaded from a subdomain (static.thepiratebay.se) which aren't going through my proxy, because it links to the original domain. Is there a way to also let those requests go to my proxy? Do I have to change the contents of the pages when serving it to let them also go through my proxy? If so: how? :) Or is there another (perhaps better) way?

  Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >