Search Results

Search found 4929 results on 198 pages for 'character'.

Page 132/198 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• Computer suddenly won't boot - stops at a flashing prompt

  - by Dave M G

  I have been running Ubuntu on my computer for a long time, and I have been using 11.10 since it became available in October. Suddenly, this morning, when I rebooted, the computer would not reach the log in screen. I go through the standard POST boot sequence, and I also get a splash screen for my Nvidia graphics card, so at least most of the hardware seems to be working. After that, all I get is a flashing text prompt - one blinking white underline character on a screen that is otherwise completely blank. I don't think it is even reaching GRUB. No key input is possible. I have tried various key combinations to try and initiate some kind of interface, be it command line or anything else. The only key combination that works is [CTRL]+[ALT]+[Delete] to reboot. I realize this is likely to be a hardware problem, but it could be an Ubuntu problem(?), so I'm hoping for a specific set of troubleshooting steps so I can diagnose and repair this issue. My current suspicion is that one of the drives in my 2 disk software RAID has failed (even though they should be too new for that). However, this computer is critical to my work, so I'd like to invite advice on any possibilities so as to waste as little time as possible in fixing this machine.

  Read the article

• Realistic Jumping

  - by Seth Taddiken

  I want to make the jumping that my character does more realistic. This is what I've tried so far but it doesn't seem very realistic when the player jumps. I want it to jump up at a certain speed then slow down as it gets to the top then eventually stopping (for about one frame) and then slowly going back down but going faster and faster as it goes back down. I've been trying to make the speed at which the player jumps up slow down by one each frame then become negative and go down faster... but it doesn't work very well public bool isPlayerDown = true; public bool maxJumpLimit = false; public bool gravityReality = false; public bool leftWall = false; public bool rightWall = false; public float x = 76f; public float y = 405f; if (Keyboard.GetState().IsKeyDown(up) && this.isPlayerDown == true && this.y <= 405f) { this.isPlayerDown = false; } if (this.isPlayerDown == false && this.maxJumpLimit == false) { this.y = this.y - 6; } if (this.y <= 200) { this.maxJumpLimit = true; } if (this.isPlayerDown == true) { this.y = 405f; this.isPlayerDown = true; this.maxJumpLimit = false; } if (this.gravityReality == true) { this.y = this.y + 2f; this.gravityReality = false; } if (this.maxJumpLimit == true) { this.y = this.y + 2f; this.gravityReality = true; } if (this.y > 405f) { this.isPlayerDown = true; }

  Read the article

• Is it worth replacing mouse by standalone trackpad for heavy code-editing? [on hold]

  - by heltonbiker

  I recently got more interested in improving my tools, workspace and worflow. The first sting came with a sore finger due to a crappy keyboard, and then after some research I fell in love with the "mechanical keyboard is what you need" doctrine, bought one (cherry MX Brown if you're curious), and am very happy with the results. Currently I am replacing my previous text editor (Geany) with Sublime Text 3, and am also very happy and feeling much more powerful and professional :) Well, but while I re-read all the ancient debates about VIM vs whatever-else, the following excerpt from a blog post got me thinking again about the mouse vs keyboard, and the "moving around from the very home row" (in VIM) versus gesturing away with the tiny and unstable mouse cursor: Reaching for a mouse may indeed slow you down, but developers are commonly on machines where the trackpad is a micro-hand movement away. Most novice programmers can click on a character on screen faster than an expert Vimmer can type 20jFp; or LkEEE or /word or any other nasty way Vimmers have to use. The point of a mouse is to make arbitrary on screen jumps efficient, and it’s very good at doing that. Don’t you ever think you can beat a mouse. Well, although there is some bitterness in this statement, it makes a lot of sense, and EVEN MORE if you consider your direct input to be a TRACKPAD conveniently placed in front of your spacebar (which oddly is where I like to put my mouse, rotated 90° ccw, due to a serious tendonitis in my right shoulder, already healed, but you knod...). So, the question is: Has anyone replaced mouse by a standalone trackpad, to work in code editing in a desktop machine (that is, with a sandalone keyboard)? Was it worth the change?

  Read the article

• Is this the most effect simple way to display a moving image? SDL2

  - by user36324

  I've looked around for tutorials on SDL2, but there isnt many so I am curious i was messing around and is this an effective way to move an image. One problem is that it drags along the image to where it moves. #include "SDL.h" #include "SDL_image.h" int main(int argc, char* argv[]) { bool exit = false; SDL_Init(SDL_INIT_EVERYTHING); SDL_Window *win = SDL_CreateWindow("Hello World!", 100, 100, 640, 480, SDL_WINDOW_SHOWN); SDL_Renderer *ren = SDL_CreateRenderer(win, -1, SDL_RENDERER_ACCELERATED | SDL_RENDERER_PRESENTVSYNC); SDL_Surface *png = IMG_Load("character.png"); SDL_Rect src; src.x = 0; src.y = 0; src.w = 161; src.h = 159; SDL_Rect dest; dest.x = 50; dest.y = 50; dest.w = 161; dest.h = 159; SDL_Texture *tex = SDL_CreateTextureFromSurface(ren, png); SDL_FreeSurface(png); while(exit==false){ dest.x++; SDL_RenderClear(ren); SDL_RenderCopy(ren, tex, &src, &dest); SDL_RenderPresent(ren); } SDL_Delay(5000); SDL_DestroyTexture(tex); SDL_DestroyRenderer(ren); SDL_DestroyWindow(win); SDL_Quit(); }

  Read the article

• Do we ethically have the right to use the MAC Address for verification purposes?

  - by Matt Ridge

  I am writing a program, or starting at the very beginning of it, and I am thinking of purchase verification systems as a final step. I will be catering to Macs, PCs, and possibly Linux if all is said and done. I will also be programming this for smartphones as well using C++ and Objective-C. (I am writing a blueprint before going head first into it) That being said, I am not asking for help on doing it yet, but what I’m looking for is a realistic measurement for what could be expected as a viable and ethical option for purchase verification systems. Apple through the Apple Store, and some other stores out there have their own "You bought it" check. I am looking to use a three prong verification system. Email/password 16 to 32 character serial number using alpha/numeric and symbols with Upper and lowercase variants. MAC Address. The first two are in my mind ok, but I have to ask on an ethical standpoint, is a MAC Address to lock the software to said hardware unethical, or is it smart? I understand if an Ethernet card changes if not part of the logic board, or if the logic board changes so does the MAC address, so if that changes it will have to be re-verified, but I have to ask with how everything is today... Is it ethical to actually use the MAC address as a validation key or no? Should I be forward with this kind of verification system or should I keep it hidden as a secret? Yes I know hackers and others will find ways of knowing what I am doing, but in reality this is why I am asking. I know no verification is foolproof, but making it so that its harder to break is something I've always been interested in, and learning how to program is bringing up these questions, because I don't want to assume one thing and find out it's not really accepted in the programming world as a "you shouldn't do that" maneuver... Thanks in advance... I know this is my first programming question, but I am just learning how to program, and I am just making sure I'm not breaking some ethical programmer credo I shouldn't...

  Read the article

• What Is The Formula for the 3 of 9 Bar Code Alphabet?

  - by Chris Moschini

  Background: 3 of 9 Barcode Alphabet A simple syntax for 3 of 9 bar codes What is the formula behind the alphabet and digits in a 3 of 9 bar code? For example, ASCII has a relatively clear arrangement. Numbers start at 33, capitals at 65, lowercase at 97. From these starting points you can infer the ASCII code for any number or letter. The start point for each range is also a multiple of 32 + 1. Bar codes seem random and lacking sequence. If we use the syntax from the second link, this is the first six characters in 3 of 9: A 100-01 B 010-01 C 110-00 D 001-01 E 101-00 F 011-00 I see no pattern here; what is it? I'm as much interested in the designer's intended pattern behind these as I am in someone devising an algorithm of their own that can give you the above code for a given character based on its sequence. I struggled with where to put this question; is it history, computer science, information science? I chose Programmers because a StackExchange search had the most barcode hits here, and because I wanted to specifically relate it to ASCII to explain what sort of formula/explanation I'm looking for.

  Read the article

• Is there a way how to customize my keyboard layout in Xubuntu in a graphical way (by clicking)?

  - by Honza Javorek

  Possible duplicate, but I really couldn't find a solution. I would like to adjust my US keyboard layout, e.g. to add possibility to type some special characters on combination of right Alt + another character, etc. Moreover, my arrow up is dead, so until I buy another keyboard, I'd like to use my right shift as my arrow up, ASAP. However, there seems to be no way how to edit my keyboard layout easily in Xubuntu :( I found no editor and I really don't want to spend years in some configuration files and terminal (not that I can't, but I really really don't want). KLE - the only editor I could find, but no installation guide, no package, no PPA, no idea how to make it working (and uninstallable if not needed one day) Editor in Ubuntu - apparently not present in Xubuntu I found several tutorials how to change the layout, but they all seems to be complicated and not easy to follow. I don't want to spend a weekend in terminal or so, I am looking for an app to launch, make some clicking, finish my work by hitting Save button and - done! Please, is there such solution? For humans?

  Read the article

• Use a SQL Database for a Desktop Game

  - by sharethis

  Developing a Game Engine I am planning a computer game and its engine. There will be a 3 dimensional world with first person view and it will be single player for now. The programming language is C++ and it uses OpenGL. Data Centered Design Decision My design decision is to use a data centered architecture where there is a global event manager and a global data manager. There are many components like physics, input, sound, renderer, ai, ... Each component can trigger and listen to events. Moreover, each component can read, edit, create and remove data. The question is about the data manager. Whether to Use a Relational Database Should I use a SQL Database, e.g. SQLite or MySQL, to store the game data? This contains virtually all game content like items, characters, inventories, ... Except of meshes and textures which are even more performance related, so I will keep them in memory. Is a SQL database fast enough to use it for realtime reading and writing game informations, like the position of a moving character? I also need to care about cross-platform compatibility. Aside from keeping everything in memory, what alternatives do I have? Advantages Would Be The advantages of using a relational database like MySQL would be the data orientated structure which allows fast computation. I would not need objects for representing entities. I could easily query data of objects near the player needed for rendering. And I don't have to take care about data of objects far away. Moreover there would be no need for savegames since the hole game state is saved in the database. Last but not least, expanding the game to an online game would be relative easy because there already is a place where the hole game state is stored.

  Read the article

• What does the ".align" x86 Assembler directive do exactly? [migrated]

  - by Sinister Clock

  I will list exactly what I do not understand, and show you the parts I can not understand as well. First off, The .Align Directive .align integer, pad. The .align directive causes the next data generated to be aligned modulo integer bytes 1.~ ? : What is implied with "causes the next data generated to be aligned modulo integer bytes?" I can surmise that the next data generated is a memory-to-register transfer, no? Modulo would imply the remainder of a division. I do not understand "to be aligned modulo integer bytes"....... What would be a remainder of a simple data declaration, and how would the next data generated being aligned by a remainder be useful? If the next data is aligned modulo, that is saying the next generated data, whatever that means exactly, is the remainder of an integer? That makes absolutely no sense. What specifically would the .align, say, .align 8 directive issued in x86 for a data byte compiled from a C char, i.e., char CHARACTER = 0; be for? Or specifically coded directly with that directive, not preliminary Assembly code after compiling C? I have debugged in Assembly and noticed that any C/C++ data declarations, like chars, ints, floats, etc. will insert the directive .align 8 to each of them, and add other directives like .bss, .zero, .globl, .text, .Letext0, .Ltext0. What are all of these directives for, or at least my main asking? I have learned a lot of the main x86 Assembly instructions, but never was introduced or pointed at all of these strange directives. How do they affect the opcodes, and are all of them necessary?

  Read the article

• Collision Detection Problems

  - by MrPlosion

  So I'm making a 2D tile based game but I can't quite get the collisions working properly. I've taken the code from the Platformer Sample and implemented it into my game as seen below. One problem I'm having is when I'm on the ground for some strange reason I can't move to the left. Now I'm pretty sure this problem is from the HandleCollisions() method because when I stop running it I can smoothly move around with no problems. Another problem I'm having is when I'm close to a tile the character jitters very strangely. I will try to post a video if necessary. Here is the HandleCollisions() method: Thanks. void HandleCollisions() { Rectangle bounds = BoundingRectangle; int topTile = (int)Math.Floor((float)bounds.Top / World.PixelTileSize); int bottomTile = (int)Math.Ceiling((float)bounds.Bottom / World.PixelTileSize) - 1; int leftTile = (int)Math.Floor((float)bounds.Left / World.PixelTileSize); int rightTile = (int)Math.Ceiling((float)bounds.Right / World.PixelTileSize) - 1; isOnGround = false; for(int x = leftTile; x <= rightTile; x++) { for(int y = topTile; y <= bottomTile; y++) { if(world.Map[y, x].Collidable == true) { Rectangle tileBounds = new Rectangle(x * World.PixelTileSize, y * World.PixelTileSize, World.PixelTileSize, World.PixelTileSize); Vector2 depth = RectangleExtensions.GetIntersectionDepth(bounds, tileBounds); if(depth != Vector2.Zero) { if(Math.Abs(depth.Y) < Math.Abs(depth.X)) { isOnGround = true; position = new Vector2(position.X, position.Y + depth.Y); } else { position = new Vector2(position.X + depth.X, position.Y); } bounds = BoundingRectangle; } } } }

  Read the article

• Useful WatiN Extension Methods

  - by Steve Wilkes

  I've been doing a fair amount of UI testing using WatiN recently – here’s some extension methods I've found useful. This checks if a WatiN TextField is actually a hidden field. WatiN makes no distinction between text and hidden inputs, so this can come in handy if you render an input sometimes as hidden and sometimes as a visible text field. Note that this doesn't check if an input is visible (I've got another extension method for that in a moment), it checks if it’s hidden. public static bool IsHiddenField(this TextField textField) { if (textField == null || !textField.Exists) { return false; } var textFieldType = textField.GetAttributeValue("type"); return (textFieldType != null) && textFieldType.ToLowerInvariant() == "hidden"; } The next method quickly sets the value of a text field to a given string. By default WatiN types the text you give it into a text field one character at a time which can be necessary if you have behaviour you want to test which is triggered by individual key presses, but which most of time is just painfully slow; this method dumps the text in in one go. Note that if it's not a hidden field then it gives it focus first; this helps trigger validation once the value has been set and focus moves elsewhere. public static void SetText(this TextField textField, string value) { if ((textField == null) || !textField.Exists) { return; } if (!textField.IsHiddenField()) { textField.Focus(); } textField.Value = value; } Finally, here's a method which checks if an Element is currently visible. It does so by walking up the DOM and checking for a Style.Display of 'none' on any element between the one on which the method is invoked, and any of its ancestors. public static bool IsElementVisible(this Element element) { if ((element == null) || !element.Exists) { return false; } while ((element != null) && element.Exists) { if (element.Style.Display.ToLowerInvariant().Contains("none")) { return false; } element = element.Parent; } return true; } Hope they come in handy

  Read the article

• Working with lots of cubes. Improving performance?

  - by Randomman159

  Edit: To sum the question up, I have a voxel based world (Minecraft style (Thanks Communist Duck)) which is suffering from poor performance. I am not positive on the source but would like any possible advice on how to get rid of it. I am working on a project where a world consists of a large quantity of cubes (I would give you a number, but it is user defined worlds). My test one is around (48 x 32 x 48) blocks. Basically these blocks don't do anything in themselves. They just sit there. They start being used when it comes to player interaction. I need to check what cubes the users mouse interacts with (mouse over, clicking, etc.), and for collision detecting as the player moves. Now I had a massive amount of lag at first, looping through every block. I have managed to decrease that lag, by looping through all the blocks, and finding which blocks are within a particular range of the character, and then only looping through those blocks for the collision detection, etc. However, I am still going at a depressing 2fps. Does anyone have any other ideas on how I could decrease this lag? Btw, I am using XNA (C#) and yes, it is 3d.

  Read the article

• why are transaction monitors on decline? or are they?

  - by mrkafk

  http://www.itjobswatch.co.uk/jobs/uk/cics.do http://www.itjobswatch.co.uk/jobs/uk/tuxedo.do Look at the demand for programmers (% of job ads that the keyword appears), first graph under the table. It seems like demand for CICS, Tuxedo has fallen from 2.5%/1% respectively to almost zero. To me, it seems bizarre: now we have more networked and internet enabled machines than ever before. And most of them are talking to some kind of database. So it would seem that use of products whose developers spent last 20-30 years working on distributing and coordinating and optimizing transactions should be on the rise. And it appears they're not. I can see a few causes but can't tell whether they are true: we forgot that concurrency and distribution are really hard, and redoing it all by ourselves, in Java, badly. Erlang killed them all. Projects nowadays have changed character, like most business software has already been built and we're all doing internet services, using stuff like Node.js, Erlang, Haskell. (I've used RabbitMQ which is written in Erlang, "but it was small specialized side project" kind of thing). BigData is the emphasis now and BigData doesn't need transactions very much (?). None of those explanations seem particularly convincing to me, which is why I'm looking for better one. Anyone?

  Read the article

• Enemy collision detection with movie clips

  - by user18080

  I have created multiple movieclips with animations within them. It is an obstacle avoidance game and I cannot seem to be able to get my enemies to contact my playableCharacter. The enemies I have created are each embedded on certain levels of my game. I have created an array, enemiesArray to have each of my enemies placed within it. Here is the code for that: //step 1: make sure array exists if(enemiesArray!=null && enemiesArray.length!=0) { //step 2: check all enemies against villain for(var i:int = 0;i < enemiesArray.length; i++) { //step 3: check for collision if(villain.hitTestObject(enemiesArray[i])) { //step 4: do stuff trace("HIT!"); removeChild(enemiesArray[i]); enemiesArray.splice(i,1); removeChild(villain); villain = null; } } } What I am unsure of is whether or not my enemiesArray is actually holding the movieclips I have suggested. If it was, this code would be tracing back a "HIT" for every time I ran into an enemy and would kill my character. It is not doing that however. I am thinking I have to push my movieclips into my array but I don't know how to do that or where for that matter. Any and all help would be much appreciated.

  Read the article

• Reversing animated sprites

  - by brandon sedgwick

  I have created a sprite sheet of which consists of 6 frames with a character moving legs each frame, now I have coded it so that the animation is running successfully from frame 1 to 6, however I am trying to reverse this so then when it goes from 1 to 6 instead of restarting it go's 6 to 1 in a continuous loop. The coding for current animation is: void SpriteGame::Update(int tickTotal, int tickDelta) { //This is where you manage the state of game objects if ( tickTotal >= this->playerLastFrameChange + 4) { //Four ticks have elapsed since the last frame change this->playerFrame = this->playerFrame + 1; this->playerLastFrameChange = tickTotal; //We've just changed the frame if (this->playerFrame >= this->playerSheetLength) { this->playerFrame = playerLastFrameChange + 4; } //Frame has changed so change the source rectangle this->playerSourceRect->left = this->playerFrame * 64; this->playerSourceRect->top = 0; this->playerSourceRect->right = (this->playerFrame + 1) * 64; this->playerSourceRect->bottom = 64; } } any help please I am using DirectX11 as thats what we are being told to use as its for an win 8 game.

  Read the article

• How to quickly search through a very large list of strings / records on a database

  - by Giorgio

  I have the following problem: I have a database containing more than 2 million records. Each record has a string field X and I want to display a list of records for which field X contains a certain string. Each record is about 500 bytes in size. To make it more concrete: in the GUI of my application I have a text field where I can enter a string. Above the text field I have a table displaying the (first N, e.g. 100) records that match the string in the text field. When I type or delete one character in the text field, the table content must be updated on the fly. I wonder if there is an efficient way of doing this using appropriate index structures and / or caching. As explained above, I only want to display the first N items that match the query. Therefore, for N small enough, it should not be a big issue loading the matching items from the database. Besides, caching items in main memory can make retrieval faster. I think the main problem is how to find the matching items quickly, given the pattern string. Can I rely on some DBMS facilities, or do I have to build some in-memory index myself? Any ideas? EDIT I have run a first experiment. I have split the records into different text files (at most 200 records per file) and put the files in different directories (I used the content of one data field to determine the directory tree). I end up with about 50000 files in about 40000 directories. I have then run Lucene to index the files. Searching for a string with the Lucene demo program is pretty fast. Splitting and indexing took a few minutes: this is totally acceptable for me because it is a static data set that I want to query. The next step is to integrate Lucene in the main program and use the hits returned by Lucene to load the relevant records into main memory.

  Read the article

• Is it a good practice to create a list of definitions for all symbols and words in a programming language?

  - by MrDaniel

  After arriving at this point in Learning Python The Hard Way I am wondering if this is a good practice to create a list of symbols and define what they do as noted in bold below, for every programming language. This seems reasonable, and might be very useful to have when jumping between programming languages? Is this something that programmers do or is it just a waste of effort? Exercise 22: What Do You Know So Far? There won't be any code in this exercise or the next one, so there's no WYSS or Extra Credit either. In fact, this exercise is like one giant Extra Credit. I'm going to have you do a form of review what you have learned so far. First, go back through every exercise you have done so far and write down every word and symbol (another name for 'character') that you have used. Make sure your list of symbols is complete. Next to each word or symbol, write its name and what it does. If you can't find a name for a symbol in this book, then look for it online. If you do not know what a word or symbol does, then go read about it again and try using it in some code. You may run into a few things you just can't find out or know, so just keep those on the list and be ready to look them up when you find them. Once you have your list, spend a few days rewriting the list and double checking that it's correct. This may get boring but push through and really nail it down. Once you have memorized the list and what they do, then you should step it up by writing out tables of symbols, their names, and what they do from memory. When you hit some you can't recall from memory, go back and memorize them again.

  Read the article

• What is meant by "no password set" for root account (and otthers)?

  - by MMA

  Several years back, we were more accustomed to changing to the root account using the su command. First, we switched to the root account, and then executed those root commands. Now we are more accustomed to using the sudo command. But we know that the root account is there. We can readily find the home directory of user root. $ ls -ld /root/ drwx------ 18 root root 4096 Oct 22 17:21 /root/ Now my point is, it is stated that "the root password in Ubuntu is left unset". Please see the answers to this question. Most of the answers have something to this effect in the first paragraph. One or two answers further state that "the account is left disabled". Now my (primary) questions are, What is meant by an unset password? Is it blank? Is it null? Or something else more cryptic? How does the account becomes enabled once I set password for it? (sudo password root) In order get a better understanding, I checked the /etc/shadow file. Since I have already set a password for the root account, I can no longer see what is there (encrypted password). So, I created another account and left it disabled. The corresponding entry in the /etc/shadow file is, testpassword:!:16020:0:99999:7::: Now perhaps my above queries need to be changed to, what does an ! in password field mean? Other encrypted passwords are those very long cryptic strings. How come this encrypted form is only one character long? And does an account become disabled if I put an ! in the (encrypted) password field?

  Read the article

• How to build a "traffic AI"?

  - by Lunikon

  A project I am working on right now features a lot of "traffic" in the sense of cars moving along roads, aircraft moving aroun an apron etc. As of now the available paths are precalculated, so nodes are generated automatically for crossings which themselves are interconnected by edges. When a character/agent spawns into the world it starts at some node and finds a path to a target node by means of a simply A* algorithm. The agent follows the path and ultimately reaches its destination. No problem so far. Now I need to enable the agents to avoid collisions and to handle complex traffic situations. Since I'm new to the field of AI I looked up several papers/articles on steering behavior but found them to be too low-level. My problem consists less of the actual collision avoidance (which is rather simple in this case because the agents follow strictly defined paths) but of situations like one agent leaving a dead-end while another one wants to enter exactly the same one. Or two agents meeting at a bottleneck which only allows one agent to pass at a time but both need to pass it (according to the optimal route found before) and they need to find a way to let the other one pass first. So basically the main aspect of the problem would be predicting traffic movement to avoid dead-locks. Difficult to describe, but I guess you get what I mean. Do you have any recommendations for me on where to start looking? Any papers, sample projects or similar things that could get me started? I appreciate your help!

  Read the article

• How do I convert mouse co-ordinates in Slick2d java?

  - by Trycon

  I'm really new in Java and I really want to how do I convert the mouse clicks to co-ordinates in game. My game moves its images so that the camera could stay with the character. I follwed thenewboston tutorials. I have been modifying new codes for smoother gameplay. I have been searching the web for tutorials. This is one of the codes: PosGameX=MouseX+0; PosGameY=MouseY+0; I have not try this code but, I really think this would not work. The website I have visited, I think, is not good for coding. My gameplay is that when the mouse clicks on a position. It would try to get the co-ordinates(Mouse) and convert it to game co-ordinates. And I really want to know how do I make my mouse clicks to game co-ordinates? FOR MORE INFO: Searches: How Do I translate game co-ordinates? How Do I translate mouse to game co-ordinates? AND PLEASE! Do not give me algebra. I have really forgotten those.

  Read the article

• "bug" in C++11 text by Stroustrup?

  - by Astara

  I found an apparent contradiction in the c++ text having to do with the result of the c_str() function operating on std:strings (in my copy, the definition and contradiction are on p1040). First it defines the c_str() function as something that produces a 'C-style' (zero-terminated) string, but later it talks about how a C++ c_str value can have embed a 'C'-style, end-of-string terminators (i.e. NUL's) embedded in the string (that is defined by being NUL terminated). Um... does anyone else feel that this is a 'stretching' of the definition of a C-string beyond it's definition? I.e. I think what it means, is that if you were to look at the length() function as applied to the string, it will show a different end of string than using the C-definition of a z-string -- one that can contain any character except NUL, and is terminated by NUL. I likely don't have to worry about it in my of my programs, but it seems like a subtle distinction that makes a C++ c_str, not really a 'C'-string. Am I misunderstanding this issue? Thanks!

  Read the article

• Create a Texture2D from larger image

  - by Dialock

  I am having trouble with the basic logic of this solution: Xna: Splitting one large texture into an array of smaller textures in respect to my specific problem (specifically, I'm looking at the second answer.) How can I use my source rectangle that I already use for drawing to create a new Texture2D? spriteBatch.Draw(CurrentMap.CollisionSet, currentMap.CellScreenRectangle(x, y), CurrentMap.TileSourceRectangle(currentMap.MapCells[x, y].TileDepths[4]), Color.FromNonPremultiplied(0,0,0, 45), 0.0f, Vector2.Zero, SpriteEffects.None, 0.91f); I know I want a method that I started so: //In Update Method of say the player's character. Texture2D CollisionTexture = ExtractTexture(MapManager.CurrentMap.CollisionSet, MapManager.TileWidth, MapManager.TileHeight); // In MapManager Class who knows everything about tiles that make up a level. public Texture2D ExtractTexture(Texture2D original, int partWidth, int partheight, MapTile mapCell) { var dataPerPart = partWidth * partheight; Color[] originalPixelData = new Color[original.Width * original.Height]; original.GetData<Color>(originalPixelData); Color[] newTextureData = new Color[dataPerPart]; original.GetData<Color>(0, CurrentMap.TileSourceRectangle(mapCell.TileDepths[4]), originalPixelData, 0, originalPixelData.Count()); Texture2D outTexture = new Texture2D(original.GraphicsDevice, partWidth, partheight); } I think the problem is I'm just not understanding the overload of Texture2D.GetData< Part of my concern is creating an array of the whole texture in the first place. Can I target the original texture and create an array of colors for copying based on what I already get from the method TileSourceRecatangle(int)?

  Read the article

• What is the best practice for reading a large number of custom settings from a text file?

  - by jawilmont

  So I have been looking through some code I wrote a few years ago for an economic simulation program. Each simulation has a large number of settings that can be saved to a file and later loaded back into the program to re-run the same/similar simulation. Some of the settings are optional or depend on what is being simulated. The code to read back the parameters is basically one very large switch statement (with a few nested switch statements). I was wondering if there is a better way to handle this situation. One line of the settings file might look like this: #RA:1,MT:DiscriminatoryPriceKDoubleAuction,OF:Demo Output.csv,QM:100,NT:5000,KP:0.5 //continues... And some of the code that would read that line: switch( Character.toUpperCase( s.charAt(0) ) ) { case 'R': randSeed = Integer.valueOf( s.substring(3).trim() ); break; case 'M': marketType = s.substring(3).trim(); System.err.println("MarketType: " + marketType); break; case 'O': outputFileName = s.substring(3).trim() ; break; case 'Q': quantityOfMarkets = Integer.valueOf( s.substring(3).trim() ); break; case 'N': maxTradesPerRound = Integer.valueOf( s.substring(3).trim() ); break; case 'K': kParameter = Float.valueOf( s.substring(3).trim() ); break; // continues... }

  Read the article

• Unable to debug javascript?

  - by linkme69

  I’m having some problems debugging an encoded javacscript. This script I’m referring to given in this link over here. The encoding here is simple and it works by shifting the unicodes values to whatever Codekey was use during encoding. The code that does the decoding is given here in plain English below:- <script language="javascript"> function dF(s){ var s1=unescape(s.substr(0,s.length-1)); var t=''; for(i=0;i<s1.length;i++)t+=String.fromCharCode(s1.charCodeAt(i)-s.substr(s.length-1,1)); document.write(unescape(t)); } I’m interested in knowing or understanding the values (e.g s1,t). Like for example when the value of i=0 what values would the following attributes / method would hold s1.charCodeAt(i) and s.substr(s.length-1,1) The reason I’m doing this is to understand as to how a CodeKey function really works. I don’t see anything in the code above which tells it to decode on the basis of codekey value. The only thing I can point in the encoding text is the last character which is set to 1 , 2 ,3 or 4 depending upon the codekey selected during encoding process. One can verify using the link I have given above. However, to debug, I’m using firebug addon with the script running as localhost on my wamp server. I’m able to put a breakpoint on the js using firebug but I’m unable to retrieve any of the user defined parameters or functions I mentioned above. I want to know under this context what would be best way to debug this encoded js.

  Read the article

• how to speed up this code? [migrated]

  - by dot

  I have some code that's taking over 3 seconds to complete. I'm just wondering if there's a faster way to do this. I have a string with anywhere from 10 to 70 rows of data. I break it up into an array and then loop through the array to find specific patterns. $this->_data = str_replace(chr(27)," ",$this->_data,$count);//strip out esc character $this->_data = explode("\r\n", $this->_data); $detailsArray = array(); foreach ($this->_data as $details) { $pattern = '/(\s+)([0-9a-z]*)(\s+)(100\/1000T|10|1000SX|\s+)(\s*)(\|)(\s+)(\w+)(\s+)(\w+)(\s+)(\w+)(\s+)(1000FDx|10HDx|100HDx|10FDx|100FDx|\s+)(\s*)(\w+)(\s*)(\w+|\s+)(\s*)(0)/i'; if (preg_match($pattern, $details, $matches)) { array_push($detailsArray, array( 'Port' => $matches[2], 'Type' => $matches[4], 'Alert' => $matches[8], 'Enabled' => $matches[10], 'Status' => $matches[12], 'Mode' => $matches[14], 'MDIMode' => $matches[16], 'FlowCtrl' => $matches[18], 'BcastLimit' => $matches[20])); }//end if }//end for $this->_data = $detailsArray; Just wondering if you think there's a way to make it more efficient. Thanks.

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >