Search Results

Search found 6753 results on 271 pages for 'forward declaration'.

Page 132/271 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• Port forwarding not working?

  - by rphello101

  I'm trying to set up an Apache Server to be accessed publicly. I'm using a Netgear R4500 router hooked up to a Motorola SB6121 modem. I can access my server on my computer by typing in my IP address. After following the instructions to forward port 80 so I can access the server from other computers, it does not work (see image). I get "This webpage is not available". I am forwarding to the IP address of my computer. Using this Network Port Scanner Tool, it says "80/tcp filtered http", which, as I understand it, means forwarding did not work correctly. In my Apache httpd file, I have: ServerName 192.168.1.13:80 and Listen 192.168.1.13:80 Anyone know what's wrong or have something I can try? click to enlarge

  Read the article

• sendmail - DSN: Name Server host not found

  - by Daniel Mitchell

  I've recently setup a new backup server and have configured sendmail with a smart_relay_host Except every email from the command line doesn't go anywhere. From mail.log: Oct 3 14:32:52 **back01 sm-mta[16570]: p93DWqtC016568: to=<[email protected], ctladdr= (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=120762, relay=10.2.30.60, dsn=5.1.2, stat=Host unknown (Name server: 10.2.30.60: host not found) Oct 3 14:32:52 ***back01 sm-mta[16570]: p93DWqtC016568: p93DWqtC016570: DSN: Host unknown (Name server: 10.2.30.60: host not found) DNS is working correctly on this box. I can do forward and reverse lookups. I can also telnet to the mail relay and send a message that way. I'm stumped, any suggestions?

  Read the article

• Outlook Anywhere remote https connection issue

  - by holian

  We have SBS 2003, and we use DYNDNS. We forward dyndns address 443 to local server ip 443 port. mycompany.dyndns.org:443 -- server.mycompany.local:443 In android phone i can check my mails with Outlook Active Snyc. From remote machine i can check my mails in owa (https://mycompany.dyndns.org/exchange) But i can't set up outlook 2013 to remote connect. I installed server.mycompany.local to remote machine trusted cert container, but i got error message: "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site. Outlook is unable to connect to the proxy server. (Error Code 10)" Is it possible to connect exchange, via dnydns? Whats the problem? Thank you

  Read the article

• Is there any software or hardware which lets you stop, slow down, speed up or even reverse time?

  - by tjrobinson

  Obviously I'm talking about time in terms of the PC clock rather than real time. We were testing an application we've developed at work by setting the clock forward and back to simulate different scenarios and I started thinking how useful it would be if you could adjust the rate(?) of the system clock with finer control. So you could make a minute pass in a second or a day pass in 30 seconds and watch how the program you're developing copes with changes in date and time. I'd be interested to hear if anyone knows of any software or hardware which can let you do some or all of the above.

  Read the article

• Amazon EC2 - Unable to connect to MySQL

  - by alexus

  I'm having issue connecting from one VM to another # nmap -p3306 ip-XX-XX-XX-XX.ec2.internal Starting Nmap 6.40 ( http://nmap.org ) at 2014-06-10 17:50 EDT Nmap scan report for ip-XX-XX-XX-XX.ec2.internal (XX.XX.XX.XX) Host is up (0.000033s latency). PORT STATE SERVICE 3306/tcp closed mysql Nmap done: 1 IP address (1 host up) scanned in 1.05 seconds # in my Security Group I allowed Inbound connectivity via port TCP, portrange 3306 and Source 0.0.0.0/0, so theoratically it should work, but in reality it doesn't( I'm running red hat enterprise linux 7 on both VMs. mariadb.service running fine on another VM and I am able to connect to it locally. DB's: # netstat -anp | grep 3306 tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 2324/mysqld # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # Any ideas what else I missed?

  Read the article

• Securing a persistent reverse SSH connection for management

  - by bVector

  I am deploying demo Ubuntu 10.04 LTS servers in environments I do not control and would like to have an easy and secure way to administer these machines without having to have the destination firewall forward port 22 for SSH access. I've found a few guides to do this with reverse port (e.g. howtoforge reverse ssh tunneling guide) but I'm concerned with security of the stored ssh credentials required for the tunnel to be opened automatically. If the machine is compromised (primary concern is physical access to the machine is out of my control) how can I stop someone from using the stored credentials to poke around in the reverse ssh tunnel target machine? Is it possible to secure this setup, or would you suggest an alternate method?

  Read the article

• Is there a way to get att.net email to stay connected?

  - by Clay Shannon

  My att.net account at home (wireless connection) has been bad for the last several days: I have to hit F5 quite a few times to "unfreeze" it (I can read an email or two, then it freezes, etc.). At work (company LAN) it's even worse: I can connect to the site and see that I have email, but can't open any of the emails - and the screen constantly refreshes (every couple of seconds) with a "Connecting..." message. It apparently connects and disconnects over and over again, but never stays connected long enough to actually access the email. Is there a way either to fix this OR forward my att.net (from home) to my work email address (accessible via MS Outlook)? Or set it up from work using Outlook to pull in my att.net email? I have Outlook 2003 at work.

  Read the article

• make pentaho report for ubuntu 11.04

  - by Hendri

  currently i'm trying to install Pentaho Reports for OpenERP which is refer from https://github.com/WillowIT/Pentaho-...rver/build.xml i ever installed on some laptops which is Windows Based and it's working, but currently i'm trying on UBuntu 11.04 OS, it prompted me error like this "error build.xml:18: failed to create task or type.." below is the steps i did : 1. install java-6-openjdk comment : "apt-get install java-6-openjdk" then i set installed java jdk into java_home environment command: "nano /etc/environment" add environment with this new line : JAVA_HOME="/usr/lib/jvm/java-6-openjdk" I install apache ant command : "apt-get install ant" followed by setting the evnironment command: "nano /etc/environment" add environment with this new line : ANT_HOME="/usr/share/ant" try to check installation with command "ant"... I get message like this: Buildfile: build.xml does not exist! Build failed then download java server from https://github.com/WillowIT/Pentaho-...rver/build.xml and then copied to Ubuntu share folder and then on command form, i goto extracted path which is share folder i mentioned and executed command "ant war " and i got error message : BUILD FAILED /share/java_server/build.xml:18: problem: failed to create task or type antlibrg:apacge.ivy.ant:retrieve cause: The name is undefined. Action:Check the spelling. Action:Check that any custom taks/types have been declared Action:Check that any /declarations have taken place. No types or taks have been defined in this namespace yet This appears to be an antlib declaration. Action:Check that the implementing library exists in one of: -/usr/share/ant/lib -/root/.ant/lib -a directory added on the command line with the -lib argument Total time:0 seconds is there any compability issue? or i miss out some steps? i'm in the some project to rush with for reporting, so please help me to solve this issue i look forward to your corporation to help me solve this issue, thanks a lot in advance Thx Best Regards,

  Read the article

• Why does PsExec hang after successfully running a powershell script?

  - by Matt

  The script is fairly straight forward. Simply tries to start a bunch of windows services. Execution locally works fine when on the target machine. The script is actually executing fine as well when done via PsExec, it just never returns until I hit the "enter" key on my CMD prompt. This is a problem, because this is being called from TeamCity, and it makes the Agent hang waiting for PsExec to return. I've tried the following: Adding an exit and exit 0 at the end of the Powershell script Adding a < NUL to the end of the PsExec call, per the answer in this SF question Adding a > stdout redirect This is how I am actually calling psexec: psexec \\target -u domain\username -p password powershell c:\path\script.ps1 No matter what I do, it hangs until I the locally on the cmd prompt. After I hit enter, I get the message: powershell exited on target with error code 0.

  Read the article

• Looking for a router-like web interface for my Debian gateway.

  - by marcusw

  Hey, I need a web interface program for my debian gateway which has the features of a router's one. Specifically, I must be able to easily Forward ports to various clients on the LAN or the router itself (it's also a server) Manage a DHCP server preferably including DHCP reservation for certain MACs Give me a list of the connected DHCP clients (optionally) Show which clients are the most active as far as bandwidth (something like iftop) Alternatively, it could be a graphical app which I could tunnel over ssh. No command line programs please...I'm used to doing this stuff with a point-and-click interface. Not adverse to command-line setup; just need to be able to reconfigure things graphically. Have a working LAMP setup. I've tried webmin, but it didn't satisfy the "easy" part...too many clicks and too many meny options.

  Read the article

• Cannot access site via IP / hostname

  - by DaveB

  I am renting a VPS with Debian installed running JBoss AS6 for my web app. I recently had some problems with my DNS hosts as they messed up the A-records for my domain which caused some new A-records to be added by mistake The DNS problem is now sorted and the domain is working ok, however I noticed that the web server no longer responds via direct IP or hostname in a web browser (although it pings ok and I can SSH in using the hostname ok) Is there any explanation for this? I am using rinetd to forward traffic from 80 to port 8080 but thats been ok for a while Any suggestions would be appreciated Regards

  Read the article

• Disable mouse hotkeys in Chrome

  - by John Ruiz

  Does anyone know how I can get Chrome to stop using my mouse buttons as hotkeys for a Logitech MX518 gaming mouse? I have the mouse driver and software suite (SetPoint) installed. Unfortunately, SetPoint does not provide per-application settings, so that route is not an option. No matter what I do in SetPoint, Chrome captures my side mouse buttons and uses them as a forward/back hotkey. I want to turn this off because I use those buttons for my push-to-talk in Mumble/Ventrilo. Any idea how I can do this? edit: my set-point does not have a way to create per-application settings.

  Read the article

• Free alternatives to vSphere for ESXi (if one exists)

  - by Tim

  Dear All, Am feeling a touch confused and overwhemled. From what I gather even though ESXi is free I will only be able to manage my VMs (create or power on etc) for 60 days unless I buy a licence for vSphere. This is somewhat frustrating. As I am looking for a home lab to practice for various certs I was hoping to also practice using vmware stuff to do so. Have I got the wrong end of the stick? Is there a free built in web interface like there was with VMServer or is the only option vSphere (which is massively out of my price range)? Looking forward to your responses and hoping that I have just missed something obvious! Regards Tim

  Read the article

• Nginx + PHP-FPM on Centos 6.5 gives me 502 Bad Gateway (fpm error: unable to read what child say: Bad file descriptor)

  - by Latheesan Kanes

  I am setting up a standard LEMP stack. My current setup is giving me the following error: 502 Bad Gateway This is what is currently installed on my server: Here's the configurations I've created/updated so far, can some one take a look at the following and see where the error might be? I've already checked my logs, there's nothing in there (http://i.imgur.com/iRq3ksb.png). And I saw the following in /var/log/php-fpm/error.log file. sidenote: both the nginx and php-fpm has been configured to run under a local account called www-data and the following folders exits on the server nginx.conf global nginx configuration user www-data; worker_processes 6; worker_rlimit_nofile 100000; error_log /var/log/nginx/error.log crit; pid /var/run/nginx.pid; events { worker_connections 2048; use epoll; multi_accept on; } http { include /etc/nginx/mime.types; default_type application/octet-stream; # cache informations about FDs, frequently accessed files can boost performance open_file_cache max=200000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; # to boost IO on HDD we can disable access logs access_log off; # copies data between one FD and other from within the kernel # faster then read() + write() sendfile on; # send headers in one peace, its better then sending them one by one tcp_nopush on; # don't buffer data sent, good for small data bursts in real time tcp_nodelay on; # server will close connection after this time keepalive_timeout 60; # number of requests client can make over keep-alive -- for testing keepalive_requests 100000; # allow the server to close connection on non responding client, this will free up memory reset_timedout_connection on; # request timed out -- default 60 client_body_timeout 60; # if client stop responding, free up memory -- default 60 send_timeout 60; # reduce the data that needs to be sent over network gzip on; gzip_min_length 10240; gzip_proxied expired no-cache no-store private auth; gzip_types text/plain text/css text/xml text/javascript application/x-javascript application/xml; gzip_disable "MSIE [1-6]\."; # Load vHosts include /etc/nginx/conf.d/*.conf; } conf.d/www.domain.com.conf my vhost entry ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } /etc/php-fpm.d/www-data.conf my php-fpm pool config ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } I've got a file in /home/www-data/public_html/index.php with the code <?php phpinfo(); ?> (file uploaded as user www-data).

  Read the article

• Network with bridge and port forwarding?

  - by rafek

  Hi! Below is my current (and planned) home network configuration. I would like to connect my non-wifi-capable desktop to my home network. The question is: HOW? What device do I need? The primary requiremen is that I need to be able to forward ports to my desktop. How would I achieve this? Is there something like "double port forwarding"? Could anyone please explain this configuration to me? Thank you in advance!

  Read the article

• Training a spam filter based on Mailman moderator's actions?

  - by mc0e

  I'm planning a Mailman server, and looking for a good way to enable list moderators train a spam filter (likely to be either spamassassin or dspam). Has anyone come up with a good way to run training based on list moderator's decisions? Currently I don't have any better strategies than asking list moderators to forward spams one by one to a training address, which seems laborious and most likely to be inconsistently applied. Any ideas? I am aware of https://bugs.launchpad.net/mailman/+bug/558292 . I'm hoping someone has a better approach.

  Read the article

• Activesync/OWA Desktop Client

  - by prestomation

  At my company we have Exchange 2k3 with OWA being public, serving up Activesync and webmail. There is no pop3 or imap support from our admins. Outlook 2k3's RPC over HTTP is also disabled Is there a desktop client that can connect to Activesync or OWA? If my ipod touch can connect to activesync, why can't my pc? I'd preferably like a linux daemon that could simply forward emails to my gmail address, but I guess I'll take what I can get. Thanks EDIT: In case it was not clear, our Exchange server is hidden completely behind a firewall, and a second exchange server has only activesync and https ports opened to the world.

  Read the article

• Can't ping IPs for devices not part of Windows Domain

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

  Read the article

• Translating Documents from a Foreign Language into English on my Computer?

  - by Simon

  I am aware that websites can be translated from many languages into English thanks to Google Translate. If I receive documentation via email that is in a language other than English, how straight forward is it to translate into English on my PC or Apple Mac? (indeed is Google Translate involved or is it strictly for websites) Similarly if I receive documentation via the normal postal mail service (termed "snail mail" if I'm correct) which needs to be translated into English, what steps need to be taken for this documentation to be translated effectively & quickly on my PC or Apple Mac (I am aware of the term Optical Character Recognition (OCR) software, and is this costly, or do free alternatives exist to carry out the translation process solely online? ).

  Read the article

• certificate error while subdomain forwarding

  - by rahulchandran

  I have a website, call it http://sub.example.com, hosted on, say, 72.xx.xx.x. There is a certificate for https://sub.example.com. Now I go into the DNS management tool in my hosting provider, and I set up the standard subdomain forwarding wherein https://sub.example.com forwards to 72.xx.xx.x. Now when I try to browse to https://sub.example.com, I get a certificate error saying it is for the wrong website. I have also tried forwarding http://sub.example.com to 72.xx.xx.x, and tried it with domain masking in both cases. I am still getting the certificate error no matter what. Additional wrinkle: if someone types in https://sub.example.com then the domain forwarding does not seem to work and IE just spins endlesssly and finally fails. How can I domain forward the https://sub.example.com to 72.xx.xx.x?

  Read the article

• How to play two or more videos side by side in a syncronized fashion in Linux?

  - by Grumbel

  I have two (or more) video files that I want to play side by side. I could do that simply by opening them in two seperate windows, but that would also seperate all the controls (play/pause/forward/...). I want to play them in a synchronized fashion so that pause/forwarding/... works on both videos simultaneously so that they always stay at the same timecode and they don't go out of sync. How would I accomplish that in Linux? This is needed for viewing only, so compositing them into a new video file first should be avoided if possible, but if there isn't an easy way to do that, I welcome answers doing it with composition as well.

  Read the article

• Move mailbox to public folder

  - by Kim Johansson

  Hello there! I need some help moving a users mailbox to a public folder. I'm not really a sysadmin, I know some AD and Windows Server, but Exchange is new stuff to me. Basically, one user has left the company, so we disabled his account in the AD, but now it's time for the mail. I need to move his old mail to a mailbox which the owern of the company and I can acess, then I would like to forward any new emails to that public folde How can I do this with Exchange 2007?

  Read the article

• Sonicwall site-to-site can not access remote network

  - by vpnwizard

  I have 2 SonicWall devices (tz100) in 2 different geographical locations. They are connected to each other using site-to-site vpn connection and this works just great. Device A network - 192.168.1.0/24 Device B network - 192.168.2.0/24 When I connect to one device, I can access, from my computer, anything on that specific subnet. However, I am unable to view anything, from my computer, on the other network. Is there a setting somewhere that will forward my requests to the other subnet? Example - I VPN into Device A, but would like to get to a server which is on the Device B network (192.168.2.0/24)

  Read the article

• OSX Mail.app send only plaintext but read as html

  - by bawkstoo

  I get email which seems properly plaintext formatted, but when I forward it out, the font size ends up being enormous and a few other formatting stupidities. So I tried the following: defaults write com.apple.mail PreferPlainText -bool TRUE And this works great, all outgoing email regardless of the text original is plaintext only, just the way I like it. But now for incoming email only the plaintext portions are available to read without going into View - Message - Raw Source (or something similar to that). Does anyone know how I can force only outgoing mail to include only plaintext, but continue to read incoming mail in the formatting it was intended?

  Read the article

• Is it possible to limit output bandwidth between eth0 and lo?

  - by mmcbro

  I'm trying to limit the bandwidth between my eth0 output (nginx proxy) to my loopback inteface (apache) by filtering on destination port. Incoming Packet -> Eth0 -> 0.0.0.0:80 Nginx -> tc qdisc class/iptable mangle 2525port -> 127.0.0.1:2525 Apache I don't know if it's even possible I'm just experimenting. My rules are the followings : tc qdisc add dev eth0 root handle 1:0 htb tc class add dev eth0 parent 1:0 classid 1:10 htb rate 2mbps ceil 2mbps prio 0 tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 10 fw flowid 1:10 iptables -A OUTPUT -t mangle -p tcp --dport 2525 -j MARK --set-mark 10 I also tried to with FORWARD chain but its still the same.

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >