Search Results

Search found 6753 results on 271 pages for 'forward declaration'.

Page 134/271 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• How to block all multicast traffic travelling through a Cisco Catalyst 3750

  - by TrueDuality

  Something changed today. I can't seem to track down what, but one of our 3750s decided that it was going to forward all the multicast traffic it saw from the ghost server across every VLAN it has. I've tried writing a simple access group that consists of the following: access-list 100 deny ip any 224.0.0.10 0.0.0.255 access-list 100 permit ip any any I apparently mistakenly assumed that once applied to an interface that it would block all of the multicast traffic on that interface regardless of VLAN. I do not want any multicast traffic flowing through this particular switch to any VLAN or even to stay on the same VLAN beyond this switch. Does anyone have any ideas?

  Read the article

• Xorg and three button mouse: emulate more than scroll alone

  - by drumfire

  I'm happy with my three-button mouse. But it could have more functions. When I press the middle button (button 2) and move the mouse, I can scroll up/down and left/right. xev shows me that when I drag the mouse with button 2 pressed it actually emulates button 4 (scroll up), 5 (down), 6 (left) and 7 (right). But can we take this further? For example, I would like to emulate button 8 if I press button 1 and 2 together, and button 9 if i press button 2 and 3. This would allow me to have the 'back' and 'forward' functionality in my browser. It would also be nice to get more functionality by pressing, for example, shift+mouse1, alt+mouse2. You could have a whole new set of emulated keys. Can this be done and if yes, then how?

  Read the article

• Forwarding Emails From Inbox Only

  - by ircmaxell

  I have a forward setup on one of our public facing email addresses to a few users outside of our system (to an external address). Seeing as it's public (printed on a website in plain text), we get TONS of spam on that account. We're being marked as a SPAM source due to the forwarding by the external system. We have pretty aggressive IMF (Intelligent Message Filtering) setup, and it works great for internal messages. The problem we're facing is that Exchange is forwarding ALL the email received on that account, and not just the messages that pass the IMF (and don't get pushed into Junk). As far as I can tell, there's no way to adjust the IMF settings for that one account. And as far as I can tell, there's no way to setup folder forwarding (inbox - external address) from Exchange. Is there something I'm missing or is there any way around these issues that I may be missing? Thanks...

  Read the article

• postfix cannot send email

  - by AKLP

  I'd like to mention that im really new to this so please bear with me. I'm trying to setup a forum software to send emails via postfix but I think my server has the port 25 blocked. I tried running these: works: ping alt2.gmail-smtp-in.l.google.com don't work: telnet alt2.gmail-smtp-in.l.google.com 25 telnet 66.249.93.114 25 tried flushing iptables and then using these rules but didn't work either: sudo iptables --flush sudo iptables -P INPUT ACCEPT sudo iptables -P OUTPUT ACCEPT sudo iptables -P FORWARD ACCEPT sudo iptables -F sudo iptables -X doing a telnet on 25 port to localhost url works but nothing when telnet'ing in none local urls. mail.log: Oct 17 01:20:24 webhost postfix/smtp[3642]: connect to alt2.gmail-smtp-in.l.google.com[2607:f8b0:400e:c03::1a]:25: Connection timed out Oct 17 01:20:24 webhost postfix/smtp[3643]: connect to alt2.gmail-smtp-in.l.google.com[2607:f8b0:400e:c03::1a]:25: Connection timed out Oct 17 01:20:24 webhost postfix/smtp[3642]: 4744380032: to=<[email protected]>, relay=none, delay=2892, delays=2741/0.03/150/0, dsn=4.4.1, status=deferred (connect to alt2.gmail-smtp-in.l.google.com[2607:f$

  Read the article

• Port Forwarding Using iptables on Ubuntu

  - by user141610

  This is the scenario. I have configured a web-server in MUX. Now I want to access that web-server from Internet. Ubuntu box has two interfaces, One is connected to WAN (Public IP) and another one is connected to MUX (Private IP). MUX has no option to insert default gateway. iptables -t nat -A PREROUTING -p tcp -i eth0 -d 103.x.x.x --dport 8001 -j DNAT --to-destination 192.168.1.2:8080 iptables -A FORWARD -p tcp -d 192.168.1.2 --dport 8080 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT It does not work. Thanks...

  Read the article

• Resolving host names to their domain name in an internal BIND domain

  - by Adam Plumb

  I'm setting up a domain on my home network for learning purposes, using BIND on CentOS to act as the name server. I've got the name server up and running as type master for my internal domain (plumbnicoll.family), and can do forward and reverse lookups from other computers in my LAN. For example, host office2.plumbnicoll.family correctly returns office2.plumbnicoll.family has address 192.168.1.3. What I'd like is to be able to resolve just office2 to its address, without needing to put .plumbnicoll.family at the end. Is this possible, or even desirable to do? I'm running a mixed environment at home with both Linux and Windows computers.

  Read the article

• Improving Windows Authentication performance on IIS

  - by flalar

  We're struggling with performance issues with a ASP.NET MVC site that is using Windows Authentication. Response time is very slow on the first request to the site when the user is being authenticated. Further, every time the Authorization header is sent from the browser the response time increases with many seconds. The same issue occurs for both executed files and static content like CSS and JS. Access to the application is restricted to users within a certain role and we are now planning to allow access to static files for all authenticated users to see if that helps. The authentication method in use is NTLM. How should we go forward in pinpointing why authentication decreases performance drastically?

  Read the article

• Load balancing + NAT issue on BNT GBE 2-7 gear

  - by Clément Game

  Hi guys, I've got troubles configuring an Hardware load-Balancer with NAT functions. I have the following architecture: Internet === VIP (public) LB (private ip) ==== private addressed servers When a connection is initialised from the outside (internet) , the LB correctly forwards the SYN packet to one of the private servers. But when these servers want to reply with a SYN/ACK there is a problem. the initial SYN packet had as ip header : VIP = Private_server_Address But the private servers cannot reach VIP from their side (this is normal since it's nated), and then provide a correct reply. Have you guys any solution to correctly forward the packets to their correct destination ? Note: The load balancer, which is the default gw for the servers, also has a NAT rule for "masquerading" (actually more SNAT than real masquerading) Regards, Clément.

  Read the article

• Running multipul lines through a server.

  - by Kevin Roberson

  I am looking to buy numbers in bulk on DIDx.net. After I purchase the numbers in a particular area code, I want to forward those numbers to other numbers that are outside of that area code. This way it will be seen as a local call versus long distance. I have the customers but I don't have the system I need. I have read about Asterisk, VOIP, SIP, and BYOH. But I have no clue what will be the best system for me. Does anyone have any idea what my next step should be when it comes to hardware and software? Or what type of operating system I should use? I basically want to set up a system like GoogleVoice & Phonebooth.

  Read the article

• Vmware Fusion 5 Port Forwarding

  - by Snap Shot

  I have a service (a node.js express app) running on port 3000 in a CentOS 6.3 guest that I would like to access in a web browser on my Mac Mountain Lion host using VMware Fusion 5 Professional. I am having trouble finding any information about how to do this. I believe I would like to forward the port but I cannot find any information about this using either the GUI or by modifying configuration files. In earlier versions it looks like you might have modified a file called nat.conf but that does not seem to apply to Fusion 5. Has anyone successfully done this? Thank you.

  Read the article

• How do I move *all* the installed software on my EC2 isntance to EBS?

  - by drhyde

  I got started with Eric Hammond's great article over at http://aws.amazon.com/articles/1663 where he goes through installing MySQL and configuring it to use EBS. I got that going. I also have a lot of other stuff installed on that EC2 instance: Rails, a bunch of gems, Nginx+Passenger and so on - my understanding is that unless I explicitly configure it to use EBS, all of this sits on the EC2 instance's ephemeral storage - right? How can I move all the software I have installed to EBS - or better yet how can I set up such that going forward also any new gems etc that I install also go to the EBS volume?

  Read the article

• PDAnet on Android IP on PC is not public IP. Where does the NAT take place, PDAnet or Verizon?

  - by lcbrevard

  When using PDAnet on a PC (Win7 ultimate) to USB tether a Motorola Droid on Verizon 3G the IP address of the PC appears to be public - 64.245.171.115 (64-245-171-115.pools.spcsdns.net) - but connections show as coming from another public IP - 97.14.69.212 (212-sub-97.14.69.myvzw.com). Someone is performing Network Address Translation - either PDAnet or within the Verizon 3G network. Can someone tell me who is doing the NAT? Is it PDAnet or is it at Verizon? Is there any possibility of setting up port forwarding, such that connections to the public IP 97.14.69.212 (212-sub-97.14.69.myvzw.com) are forward to the PC? We are testing a network protocol that requires either a true public IP or forwarding a range of ports from the public Internet to the system on which the software runs (actually Linux hosted by VMware Player or Workstation on a PC running Windows).

  Read the article

• Can I re-attach SSH key forwarding through a disconnected Screen session?

  - by David Mackintosh

  I have a laptop on which I have pageant (the PuTTy SSH key agent) running. If I ssh to a system and launch screen, the ssh key forwarding works properly. However, if I disconnect from that screen session, log off, then later reconnect -- the key forwarding doesn't work any more. I am presuming that this is because when I reconnect the key forwarding is set up on different ports for the new ssh session than was the old one. Is there a way to teach an individual screen window to reconnect to the agent forwarding so that I can use my key to forward again?

  Read the article

• Microsoft DNS Server (Windows 2008) CNAME issue

  - by Lukes123

  I am using the DNS role in Windows Server 2008 R2. I have my records set up correctly with the following CNAMEs: {removed domain names for security} Currently, only the 'wsp' cname works. All the records are identically set up. I have checked with a DNS checker, and the other two CNAMEs do not resolve to anything. I have tried restarting the server, re-creating the forward lookup zone. Can anyone see what is wrong? 'A' records work fine when set.

  Read the article

• Apache mod_remoteip and access logs

  - by GioMac

  Since Apache 2.4 I've started using mod_remoteip instead of mod_extract_forwarded for rewriting client address from x-forwarded-for provided by frontend servers (varnish, squid, apache etc). So far everything works fine with the modules, i.e. php, cgi, wsgi etc... - client addresses are shown as they should be, but I couldn't write client address in access logs (%a, %h, %{c}a). No luck - I'm always getting 127.0.0.1 (localhost forward ex.). How to log client's ip address when using mod_remoteip?

  Read the article

• How can I make my Ubuntu server accessible to the internet ?

  - by wahid

  Hi, I already installed applications to make my server web server. when I type the DHCP released ip address in the web browser, i can access it but all it says is "it works....etc". I can copy files to /var/www successfuly using WINSCP but yet, i can not see any files when I connect to it using my windows machine in the browser. Secondly , I tried to forward port on my home SMC router, it only accepts local lan ip which my ubuntu server picks up internet ip from router...what should i do ? can you help please ???? Thanks,

  Read the article

• How to intercept and manipulate DNS queries?

  - by emtunc

  I'm not sure if I worded the question correctly to be honest but basically what I want to do is: When a user types in something like Expenses in the URL bar of a browser, I want the browser to be directed to a specific web address (very very similar to how OpenDNS shortcuts work) The IP address of the web address will not change amongst the different 'shortcuts'... i.e: mycompany.com = 10.0.0.0 mycompany.com/expenses = 10.0.0.0 mycompany.com/tracker = 10.0.0.0 When a user types expenses in the browser address bar and presses enter, I want the browser to automatically direct to the specified address as above. Would this be tricky to implement? I hope I have put my question forward appropriately :-) Additional notes: We are on a Windows envionment I believe the exchange server is running as the DNS server in the office

  Read the article

• How to restrict ssh port forwarding, without denying it?

  - by Kaz

  Suppose I have created an account whose login shell is actually a script which does not permit an interactive login, and only allows a very limited, specific set of commands to be remotely executed. Nevertheless, ssh allows the user of this account to forward ports, which is a hole. Now, the twist is that I actually want that account to set up a specific port forwarding configuration when the ssh session is established. But it must be impossible configure arbitrary port forwarding. (It is an acceptable solution if the permitted port forwarding configuration is unconditionally established as part of the every session.)

  Read the article

• Can Squid 2.7 proxy gzipped content

  - by Tom Styles

  We have a forward proxy for our network which is Squid 2.7. This is managed for us by a third party. We noticed recently that http requests going from our network to the web were having the Accept-Encoding header removed. This was resulting in all web traffic across our network (approx 8000+ PCs) being uncompressed even though the browsers and server on each end were capable. We have asked the third party to look into this and they have said it is because Squid 2.7 does not support compression. I understand this to be true but I was under the impression that the compression happened on the webserver rather than the proxy. So... Can Squid 2.7 proxy and/or cache content that is gzipped? If it can, how/why might it be configured such that the Accept-Encoding header is being removed?

  Read the article

• Is there a suitable chain for iptables when eth is in Promisc mode?

  - by user1495181

  I have a fron-end machine. Machine have2 eth cards. I want to use netfilter queue to do some checks on the packets. I set eth like this: ifconfig eth0 0.0.0.0 promisc up ifconfig eth1 0.0.0.0 promisc up I want to have an iptable rule like this(only example): iptables -A INPUT -i eth0 -j LOG --log-prefix " eth0 packet " but the packet is no passed through the iptables ,because it dosnt target to this MAC. Promisc mode didnt help. I saw that there is a way to add iptables chain for PROMISC, but need compilation... Is there any simplier way to have iptables rule when packet is not target to this eth. Currently i bypass this by creating a bridge between 2 eth and put rule on the FORWARD, but i done want to create bridge.

  Read the article

• What is the right iptables rule to allow apt-get to download programs?

  - by anthony01

  When I type something like sudo apt-get install firefox, everything work until it asks me: After this operation, 77 MB of additional disk space will be used. Do you want to continue [Y/n]? Y Then error messages are displayed: Failed to fetch: <URL> My iptables rules are as follows: -P INPUT DROP -P OUTPUT DROP -P FORWARD DROP -A INPUT -i lo -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A INPUT -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT What should I add to allow apt-get to download updates? Thanks

  Read the article

• Using rsyslog to create different log files for different processes

  - by user80203

  Scenario: I am running a cluster of machines. Each machine runs various python programs with a unique (across the cluster), but dynamically set, ID. Right now, they are all logging locally. So, I might have logs that look like: process_5.log process_6.log for processes that had ID's 5 and 6. Another machine may have: process_20.log process_25.log I wish to forward these logs to a logserver running rsyslogd. Python's logging facility has a nice syslog handler, so I understand how I could connect to the remote server. What I haven't figured out is how to use templating/DynFile to maintain log separation. e.g. on the logserver, I will want to see: process_5.log process_6.log process_20.log process_25.log which correspond to the logs of the same name on the sending machine. Is there a way to pull this off with rsyslogd templating?

  Read the article

• Simple Windows+Linux server provisioning? Chef/Puppet/Ansible etc

  - by Andrew

  I'm primarily a developer, part time devops; and manage servers here and there for my projects. I want to automate provisioning of web/app/database servers going forward for my projects I manage a mixture of both Windows and Linux servers (VPS, cloud and dedicated) I've looked at investigated Chef/Puppet/Ansible briefly; and I am wanting to find something that: Is easy to learn and understand. I don't want to invest weeks into understanding a complicated piece of tech. Ideally does not require a server ("master server") to hold the configurations Supports provisioning of Windows and Linux servers Comes with suitable documentation to get started Does anyone have any advice on what tool is best suited? Thanks

  Read the article

• Network with bridge and port forwarding?

  - by rafek

  Hi! Below is my current (and planned) home network configuration. I would like to connect my non-wifi-capable desktop to my home network. The question is: HOW? What device do I need? The primary requiremen is that I need to be able to forward ports to my desktop. How would I achieve this? Is there something like "double port forwarding"? Could anyone please explain this configuration to me? Thank you in advance!

  Read the article

• Port forwarding with DNAT and SNAT without touching other packets

  - by w00t

  I have a Linux gateway with iptables which does routing and port forwarding. I want the port forwarding to happen independent of the routing. To port forward, I add this to the nat table: iptables -t nat -A "$PRE" -p tcp -d $GW --dport $fromPort -j DNAT --to-destination $toHost:$toPort iptables -t nat -A "$POST" -p tcp -d $toHost --dport $toPort -j SNAT --to $SRC $PRE and POST are actually destination-specific chains that I jump to from the PREROUTING and POSTROUTING chains respectively so I can keep the iptables clean. $SRC is the IP address I'm SNATing to which is different from the gateway IP $GW. The problem with this setup is that regular routed packets that were not DNATed but happen to go to the same $toHost:$toPort combo will also be SNATed. I wish to avoid this. Any clever things I can do?

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >