Search Results

Search found 7755 results on 311 pages for 'usb cable'.

Page 132/311 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• Edirol UA-25 driver on Windows 8 Preview

  - by ETFairfax

  I've installed Windows 8 developer preview on a laptop and everything is working apart from my external sound card. The sound card in question is this one, and I've tried downloading and installing the Window 7 drivers from here but no joy so far. As per the instructions I remove the USB cable from the port. I then run setup.exe and (which I have set to run in Windows 7 compatibility mode). It starts doing it's stuff then says "Please insert the USB cable and wait"......that's where things stop! Nothing happens. I don't even here the "ding-dong" of the USB device being recoginised. Obviously I realise that the drivers are for windows 7 and not 8, but was hoping that someone would be able to crowbar it to work!!! Any tips appreciated. Thanks

  Read the article

• Selection between two laptops for casual gaming [closed]

  - by Prabhpreet

  I have selected two laptops that meet my budget. Here are the differences: Laptop #1: 4GB Ram, Intel Core i5 2450M 2nd Gen processor w/ 2.5 Ghz clockspeed NVIDIA GeForce GT 520MX DDR3 1 GB Dedicated Graphics 750 GB SATA II Hard disk USB 2.0 Ports 6 hrs battery life Laptop #2: 4 GB Ram, Intel Core i5 3210M 3rd Gen processor w/ 2.5 Ghz clockspeed Integrated Intel HD Graphics 4000 500 GB SATA Hard disk USB 3.0 Ports 3 hrs battery life (This concerns me) First and foremost, does dedicated graphics matter for a casual gamer like me? Secondly, does the generation of the processors make a difference despite the same clockspeed. Thirdly, do usb 3.0 ports make a difference? And lastly, which laptop is more future proof? Please help me out. Thanks!

  Read the article

• How to Shutdown PC by Pressing Power Button without asking "Force Close"?

  - by AgA

  I always Hibernate my PC. Sometimes when I boot, it does not recognize the mouse/keyboard or any USB devices. I've also setup it to go in sleep in 5 minutes. In that case I can't restart the PC so that USB starts working. When I press the Power button then it starts shutdown but asks confirmation twice, one is for shutdown by force confirmation and then there is one more. When my USB is disabled I can't input these options. So I switch off the power. What I want is that upon pressing Power Button it should at once start shutdown without asking any more confirmations System details: Win-7 Home Premium 64 bit Intel i3 530 Asus P montherboard EDIT: It is Desktop PC

  Read the article

• scanning only works under "sudo" (Ubuntu)

  - by JoelFan

  When I try to scan, using simple-scan, the UI says Failed to scan -- Unable to connect to scanner. When I run it from the command line I get: joel@home:/usr/bin$ simple-scan -d ** (simple-scan:6554): DEBUG: Starting Simple Scan 2.32.0.1, PID=6554 ** (simple-scan:6554): DEBUG: Restoring window to 600x400 pixels ** (simple-scan:6554): DEBUG: sane_init () -> SANE_STATUS_GOOD ** (simple-scan:6554): DEBUG: SANE version 1.0.22 ** (simple-scan:6554): DEBUG: Requesting redetection of scan devices ** (simple-scan:6554): DEBUG: Processing request ** (simple-scan:6554): DEBUG: Requesting scan at 300 dpi from device '(null)' ** (simple-scan:6554): DEBUG: scanner_scan ("(null)", 300, SCAN_SINGLE) ** (simple-scan:6554): DEBUG: sane_get_devices () -> SANE_STATUS_GOOD ** (simple-scan:6554): DEBUG: Device: name="brother2:bus4;dev1" vendor="Brother" model="MFC-210C" type="USB scanner" ** (simple-scan:6554): DEBUG: Processing request ** (simple-scan:6554): DEBUG: sane_open ("brother2:bus4;dev1") -> SANE_STATUS_IO_ERROR ** (simple-scan:6554): WARNING **: Unable to get open device: Error during device I/O FYI, I have already done: joel@home:~$ sudo chmod a+rwx /dev/bus/usb joel@home:~$ sudo chmod a+rwx /dev/bus/usb/* If I run under sudo: joel@home:~$ sudo simple-scan it works. How can I get simple-scan to work without sudo?

  Read the article

• Bitlocker-to-go on fixed drive

  - by Unsigned

  Scenario Two drives are connected to a computer. One via a SATA-to-USB interface, the other directly via a SATA-to-eSATA cable. The drive on USB appears as a removable drive, the drive on eSATA appears as a fixed drive. Both use NTFS. The USB drive offers Bitlocker-To-Go, the eSATA drive only offers BitLocker. Question It is my understanding that drives encrypted with BitLocker-To-Go include an app to allow Windows XP read-only access to the volume. Is this the only difference, and is there a way to use Bitlocker-To-Go on the eSATA drive? Update Another difference is found here: The recovery key is required when a BitLocker-protected fixed data drive configured for automatic unlocking is moved to another computer.[1] Assuming that does not apply to removable drives.

  Read the article

• Backing up VM data to host drive on Windows 7

  - by malcolms

  Hi, I have created a VM for Virtual PC in windows 7. I am writing a batch file to backup data in the VM to a host USB drive. I have shared the host drives. I have a USB drive that I want to backup to. But how do refer to the USB drive in the batch file. I cannot seem to map a drive to it, It is called "H on Malcolm-Desktop" in windows explorer. This is what I have tried. XCOPY C:\Inetpub\wwwroot "\\H on Malcolm-Desktop\HALII_VHD_Backup\DataBackup\Inetpub\wwwroot" /S /E /Y /D How do I write this command? Malcolm

  Read the article

• powertop keeps telling me to turn off the same thing, over and over

  - by Rory McCann

  I am running an ubuntu lucid laptop on battery. I want to make my power last as long as possible. Aswell as the normal things like turn down screen brightness, and turn off wifi, I'm using powertop. It will sometimes tell me things, e.g.: Suggestion: Enable USB autosuspend by pressing the U key OK, I press the U key to do that. However a few minutes later it will give me the same suggestion, it's as if it never enabled USB autosuspend the first time. It does this for other things aswell, not just USB autosuspend. e.g. it'll give me this message frequently: An audio device is active 100.0% of the time: hwC0D1 LSI ID 1040 Q - Quit R - Refresh A - Turn HD audio powersave on Is there anything I can do to make these choices 'stick'? Or do I have some unfortunatle hardware that won't obey linux? (If so, is there any way to confirm this?)

  Read the article

• Unable to mount portable hard drive on Ubuntu

  - by VoY

  My portable hard drive (WD My Passport), which used to work correctly now does not automount on my Ubuntu system. It does work on a Windows machine or even when plugged into WD HD TV, which is a Linux based device. There's one NTFS partition spanning the whole drive. When I plug the disk in, I see the following in dmesg: [269259.504631] usb 1-2.2: new high speed USB device using ehci_hcd and address 20 [269259.604674] usb 1-2.2: configuration #1 chosen from 1 choice However it does not mount in GNOME and I don't see it when I type: sudo fdisk -l Any suggestions why this might be? I repaired the partition using chkdsk on Windows, so the issue is probably not filesystem related.

  Read the article

• P2V using Acronis True Image Home 10 and Windows 7

  - by Anthony

  I have a full system image using Acronis True Image Home 10 and want to run it as a virtual machine on Windows 7 Professional. I have created a virtual machine but Windows Virtual PC doesn't allow access to a USB external hard disk when booting from the Acronis Recovery CD. I've copied the backup onto the host machine and I can access it via the network using the Acronis boot CD but I'm wondering if there is an easier way? Does any other free Virtual Machine software support USB devices during boot (i.e. I can restore a backup image from the USB hard disk directly)

  Read the article

• Booting from e-sata drive

  - by petersohn

  I have a HP EliteBook laptop (don't know exact product number), which has an internal hard drive with Windows installed on it. I have an external hard drive with e-sata and USB ports, linux installed on it. When I try to boot from the external drive, it works if I use USB but not if I use e-sata. In the BIOS setup, I have the following boot order set: External SATA drive USB Hard Drive Notebook Upgrade Bay Notebook Hard Drive etc. When I boot from another drive (such as the internal hard drive or from CD-ROM), and have the e-sata cable connected, it works perfectly. Is there any way to boot from the e-sata drive?

  Read the article

• How Do I make an Acer T230H Touchcreen work on Ubuntu 9.10?

  - by N Rahl

  I've done this so far: sudo nano /etc/udev/rules.d/99-touchscreen.rules And added: SUBSYSTEM=="usb", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="usb/quanta_touch" SUBSYSTEM=="input", KERNEL=="event*", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="input/quanta_touch" sudo service udev restart then the instructions here: http://ubuntuforums.org/showpost.php?p=8932808&postcount=36 And then added to my xorg conf: Section "InputDevice" Identifier "Acer T230H" Driver "hidtouch" Option "SendCoreEvents" "true" Option "ReportingMode" "Raw" Option "Device" "/dev/usb/quanta_touch" Option "PacketCount" "13" Option "OpcodePressure" "852034" Option "OpcodeX" "65584" Option "OpcodeY" "65585" Option "CalibrationModel" "1" Option "CornerTopLeftX" "0" Option "CornerTopLeftY" "0" Option "CornerTopRightX" "1920" # 1920 for 23" Option "CornerTopRightY" "0" Option "CornerBottomLeftX" "0" Option "CornerBottomLeftY" "1080" # 1080 for 23" Option "CornerBottomRightX" "1920" # 1920 for 23" Option "CornerBottomRightY" "1080" # 1080 for 23" Option "CornerScreenWidth" "1920" # 1920 for 23" Option "CornerScreenHeight" "1080" # 1080 for 23" EndSection Section "ServerLayout" Identifier "Touchscreen" InputDevice "Acer T230H" "SendCoreEvents" EndSection And restarted. And the touchscreen does nothing. Any ideas?

  Read the article

• Simple hardware RNG

  - by roygbiv

  I made a tongue-in-cheek comment to this question about making a hardware RNG. Does anyone know of any simple plans or can anyone descibe a simple hardware based RNG and the software to drive it? Go to Radio Shack. Buy a diode, an NTR resistor, a capacitor and serial cable. Cut off the end of the serial cable that does not fit on your computer. Solder the diode and resistor in series between pins DTR and DSR of the cable. Solder the capacitor between DSR and TXD pins. Write a small C program to do the following: Set DTR to 1. Start Timer. Monitor DSR until it goes to 1. Stop Timer. Calculate resistance from elapsed time. Retreive serveral bits from that value to use as part of random number. Repeat until enough bits have accumulated.

  Read the article

• HDD Carrier, like a soda carrier available at McDonalds?

  - by Jason Taylor

  We use external USB drives for backups, and they have to be stored offsite at the end of the week. Right now we have your standard external USB drive inside an enclosure. We were thinking about moving to a USB dock, and dock a bare HDD for backups, rather than having various sized and types of enclosures. If we were to do this, the drives need protection while being transported to/from the safety deposit box. Is there any kind of hard drive carrier that would let us slide two drives into it, and it would provide protection while the drives are carried around by non-technical people? I'm afraid such a product doesn't exist, but perhaps someone knows of something?

  Read the article

• Share internet with my phone?

  - by Kenneth Cochran

  Most people want to use their cellphone as a modem for their computer, commonly referred to as 'tethering'. I'm actually interested in doing the opposite: Sharing my landline internet connection(which is much faster than any 3G service) with by cellphone. My phone is a Verizon BlackBerry Curve 8330 and it has USB and bluetooth connections. I know both USB and Bluetooth are capable of supporting tcp/ip traffic what's not so clear is: Is IP over USB or Bluetooth standardized? Is it supported on my phone? Has my cellphone company crippled my phone to prevent me from using it?

  Read the article

• How to Shutdown PC by Pressing Power Button

  - by AgA

  I always Hibernate my PC. Sometimes when I boot, it does not recognize the mouse/keyboard or any USB devices. I've also setup it to go in sleep in 5 minutes. In that case I can't restart the PC so that USB starts working. When I press the Power button then it starts shutdown but asks confirmation twice one is for shutdown by force confirmation and then there is one more. When my USB is disabled I can't input these options. So I switch off the power. What I want is that upon pressing Power Button it should at once start shutdown without asking any more confirmations System details: Win-7 Home Premium 64 bit Intel i3 530 Asus P montherboard EDIT: It is Desktop PC

  Read the article

• P2V using Acronis True Image Home 10 and Windows 7

  - by Anthony

  I have a full system image using Acronis True Image Home 10 and want to run it as a virtual machine on Windows 7 Professional. I have created a virtual machine but Windows Virtual PC doesn't allow access to a USB external hard disk when booting from the Acronis Recovery CD. I've copied the backup onto the host machine and I can access it via the network using the Acronis boot CD but I'm wondering if there is an easier way? Does any other free Virtual Machine software support USB devices during boot (i.e. I can restore a backup image from the USB hard disk directly)

  Read the article

• RHEL kickstart with external DVDrom drive

  - by AndyM

  HI I've an old Dell poweredge server with an CDROM drive. I've attached a USB DVDROM and USB stick with my ks.cfg on so I can install RHEL from DVD not loads of CDs :-) I can boot from the RHEL media in DVDROM and point the installer to the USB ks.cfg. This works but the ks.cfg script has the cdrom keyword in it. The install then stops and asks for the RHEL media to be in the CDROM drive not the DVDROM. How can I change the ks.cfg so it uses the external DVDROM for the install media not servers builtin cdrom drive ? I know I can go and rebuild my DVD image to include the ks.cfg , but this is an extra step I dont want to do if I have to. Regards Andy

  Read the article

• What is a good motherboard for the Intel i7 series processor?

  - by jasondavis

  I am lost on choosing a good miotherboard at a decent price for my Intel i7-930 CPU. I have read bad things about all of them so far. Issues with RAM not working correctly, Windows not loading with USB keyboards plugged in and all kinds of nightmare stories. Here is my needs. - 6g/b SATA 3 - USB 3.0 - Cheaper is better - Support for up to 24gb of RAM, I will start out with only 12gb though - I will use 64bit v. of Windows 7 so the 4gb RAM limit should not be a problem from my OS - Should be able to boot even if I have a USB keyboard plugged in. If you have experience with a motherboard that meets these specs, please do tell about it. I appreciate any help, I am stuck right now on picking a good board.

  Read the article

• Serial converter - cat /dev/ttyUSB0 hangs on open

  - by Alex

  I am using Ubuntu 11.04 and attached a Garmin data cable. The device gets recognized [17718.502138] USB Serial support registered for pl2303 [17718.502181] pl2303 2-1:1.0: pl2303 converter detected [17718.513416] usb 2-1: pl2303 converter now attached to ttyUSB0 [17718.513443] usbcore: registered new interface driver pl2303 [17718.513446] pl2303: Prolific PL2303 USB to serial adaptor driver ... but when I do a strace cat /dev/ttyUSB0 it hangs on the open part and does not continue any more open("/dev/ttyUSB0", O_RDONLY|O_LARGEFILEC If I do the same on Ubuntu 12.04 it stops on fread(" ... ") which is okay, as there is currently no data comming in at this port. I am not sure if it is just a different configuration of the system or an driver related problem. How can I track this down further? Unfortunately I can not update the old Ubuntu 11.04 system for different reasons at the moment.

  Read the article

• Development environment for embedded system

  - by Howard Lee Harkness

  I need to develop software in C/C++ for an embedded system. I have Debian 6 running off of a USB hard drive. I would like to be able to generate a stripped-down kernel with modules, and install them either on a CF card or a USB 'thumb' drive. I succeeded in building a Linux 3.6 kernel and running it in Debian off of the USB hard drive, but I am having trouble figuring out how to install it on the thumb drive. I would like a build cycle that looks like this: 1) Build module or kernel with desired software 2) Install it on thumb drive 3) Boot and test I would like to use the same system for both development and testing, if that is feasible. I am looking for resources and tutorials that would help me understand how to do this.

  Read the article

• How to charge an iPhone on a Windows PC without Installaing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• How do I unmount a charging device in Linux?

  - by PeanutsMonkey

  I have a mobile device attached via USB to a Linux box and wish to unmount it. I ran the command fdisk -l however it does not list a mount point. I then ran the command lsusb which yielded the screenshot below. I then proceeded to search the /dev/disk/by-id directory and was found the following file The file is a symbolic link to what appears to be /dev/sdc Questions Why does it not appear when I run the command fdisk -l? How do I unmount it properly without simply yanking the USB cord from the USB port?

  Read the article

• iMac boot from linux partition on external drive

  - by user74757

  I have the following "setup:" iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]] | | | | (USB) | | | | [[MISC STORAGE PARTITION] [MISC STORAGE PARTITION] [EXT2 UBUNTU PARTITION]] I routinely use the firewire drive to boot MAC OS X. However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd). My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)... Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• PS/2 mouse works with Windows 7 32-bit but not recognised by 64-bit, What to do?

  - by Bogan

  Our USB mouse was stolen and a PS/2 OK_520 Mouse that works OK on my Medion PC, running Windows 7 32-bit, if plugged in before booting, is not recognised by Windows 7 64-bit on a Dell INSPIRONone_19T with a 19" Touch Screen. (It is a communal computer available to all residents.) A USB mouse works OK and the Update Driver option reports: 'driver is up to date'. Without the USB Mouse, Device Manager/Mice shows only the Touch Screen as a Mouse. The Add New Hardware option searches but shows nothing and the Troubleshooter says ' device possibly not recognised, alterations made to system, try again.' but it is still not recognised after repeated re-boots. The BIOS does not seem to have any option to enable a PS/2 Mouse. The Mouse is very old so maybe it is not 64-bit compatible, or there is no 64-bit driver for one, but how to get one if the device is not recognised?

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >