Search Results

Search found 15386 results on 616 pages for 'usb port'.

Page 132/616 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

  • Hooking up many different external HDs simultaneously

    - by cbizz
    I need a large amount of external storage for an upcoming project. I'm planning on purchasing 10 2TB external drives. I need them all hooked up to a single machine at the same time. What issues will I run into? I plan on using 2 power strips and having them all externally powered from the wall. I will use a USB hub to plug in all the drives. I need drive access time to be as fast as possible. I am using Ubuntu Linux(64 bit). Will I be able to mount 10 drives?

    Read the article

  • How do I listen to my microphone through my speakers in Windows 7?

    - by Gray Adams
    I've looked about and before you say it: I've used the "Listen to this device" feature built into Windows. The issue is that it is a USB microphone and there is a second delay before when it plays on the speakers, literally making me go quiet because my brain doesn't work too well hearing myself a second after I say something. I use Realtek Audio, so it works differently from the monopolistic Creative sound cards. There is no "What U Hear" or "Line In" levels. It's just "Speakers" and "Microphone". Is there a software I can use that will not have delay? I want to wear nice headphones and still hear myself

    Read the article

  • Readyboost on Windows 7 x64

    - by RobLaw84
    I'm thinking of bying 1 or more flash drives or an SD card to use with the readyboost function on by 64bit Windows 7 machine. I have a few questions regarding it before i put my hand in my pocket and buy anything. If i go ahead I would be using the fastest available flash/SD. I have 6GB of RAM current installed so will readyboost make any difference to boot / program load times? Will 2 x 2GB flash drives be quicker than 1 x 4GB or is the limitation on the motherboard? Would an SD card better than USB flash drive? thanks

    Read the article

  • How can I make windows not mount a drive when it is plugged in?

    - by heavyd
    Due to my employer's IT policy, I'm not allowed to have any kind of MP3 playing software on my computer. I do however like to plug my iPod into my computer to keep the battery charged during working hours. Normally, I plug the iPod in, Windows mounts the drive, then I have to go in and eject the drive so I can run my iPod normally while still keeping it charged. Is there anyway I can keep Windows from mounting the drive (and this drive only, I still use my USB flash drive a lot) from auto-mounting? Update: Maybe this is more of an iPod issue, but specifically I would like for the iPod to not display the "Do not disconnect" message when plugged in.

    Read the article

  • run ubuntu from virtual box in an external hard drive

    - by Bhavan
    I would like to run ubuntu on my external hard drive. I have got virtual box installed in the external hard drive and made a machine named ubuntu and installed the latest ubuntu version which i got from the .iso download. Now after much juggling around i got ubuntu running on the machine which i did the whole installation. When i move it to another machine the virtual box just woudnt open. What is the reason for this and how can i get the ubuntu run from whichever machine i plug in the external usb hard disk. Thanks a lot for your answers in advance. Best regards Bhavan

    Read the article

  • taskbar hangs when opening a folder

    - by user23950
    Any one in here who has experienced this problem. The taskbar hangs whenever I: - Open a folder from a browser - Open a usb flash drive - Open a drive on my computer It really sucks, but the solution to the taskbar hangs because of opening flash drive is to remove the flash drive. Which is not safe because the file system of my flash drive is ntfs. And I can't just safely remove it because the taskbar doesnt respond when I click it. Do you know any solutions to this? Other than disabling the automatically search for printer in the folder options.

    Read the article

  • System restore with no mouse or keyboard.

    - by user62371
    I accidentally installed some USB drivers to my Windows 7 system, they were the wrong ones and now my keyboard and mouse won't work. A system restore would get rid of them, but obviously I can't control my computer to make that happen. Keyboard and mouse still work before windows has loaded, in the BIOS and boot system, so can I do anything from there? I've already tried booting into another OS, accessing my windows filesystem and deleting the Program Files entry, but it didnt work so they must go deeper than that. Or could i launch it from a remote machine? I've got some VNC server insalled so if i could get that running that could work.

    Read the article

  • DNS Server Behind NAT

    - by Bryan
    I've got a Bind 9 DNS server sitting behind a NAT firewall, assume the Internet facing IP is 1.2.3.4 There are no restrictions on outgoing traffic, and port 53 (TCP/UDP) is forwarded from 1.2.3.4 to the internal DNS server (10.0.0.1). There are no IP Tables rules on either the VPS or the internal Bind 9 server. From a remote Linux VPS located elsewhere on the internet, nslookup works fine # nslookup foo.example.com 1.2.3.4 Server: 1.2.3.4 Address: 1.2.3.4#53 Name: foo.example.com Addresss: 9.9.9.9 However, when using the host command on the remote VPS, I receive the following output: # host foo.example.com 1.2.3.4 ;; reply from unexpected source: 1.2.3.4#13731, expected 1.2.3.4#53 ;; reply from unexpected source: 1.2.3.4#13731, expected 1.2.3.4#53 ;; connection timed out; no servers could be reached. From the VPS, I can establish a connection (using telnet) to 1.2.3.4:53 From the internal DNS server (10.0.0.1), the host command appears to be fine: # host foo.example.com 127.0.0.1 Using domain server: Name: 127.0.0.1 Address: 127.0.0.1#53 Aliases: foo.example.com has address 9.9.9.9 Any suggestions as to why the host command on my VPS is complaining about the reply coming back from another port, and what can I do to fix this? Further info: From a windows host external to the network >nslookup foo.example.com 1.2.3.4 DNS request timeout timeout was 2 seconds Server: UnKnown Address: 1.2.3.4 DNS request timed out. timeout was 2 seconds DNS request timed out. timeout was 2 seconds DNS request timed out. timeout was 2 seconds DNS request timed out. timeout was 2 seconds *** Request to UnKnown timed-out This is a default install of bind from Ubuntu 12.04 LTS, with around 11 zones configured. $ named -v BIND 9.8.1-P1 TCP Dump (filtered) from internal DNS server 20:36:29.175701 IP pc.external.com.57226 > dns.example.com.domain: 1+ PTR? 4.3.2.1.in-addr.arpa. (45) 20:36:29.175948 IP dns.example.com.domain > pc.external.com.57226: 1 Refused- 0/0/0 (45) 20:36:31.179786 IP pc.external.com.57227 > dns.example.com.domain: 2+[|domain] 20:36:31.179960 IP dns.example.com.domain > pc.external.com.57227: 2 Refused-[|domain] 20:36:33.180653 IP pc.external.com.57228 > dns.example.com.domain: 3+[|domain] 20:36:33.180906 IP dns.example.com.domain > pc.external.com.57228: 3 Refused-[|domain] 20:36:35.185182 IP pc.external.com.57229 > dns.example.com.domain: 4+ A? foo.example.com. (45) 20:36:35.185362 IP dns.example.com.domain > pc.external.com.57229: 4*- 1/1/1 (95) 20:36:37.182844 IP pc.external.com.57230 > dns.example.com.domain: 5+ AAAA? foo.example.com. (45) 20:36:37.182991 IP dns.example.com.domain > pc.external.com.57230: 5*- 0/1/0 (119) TCP Dump from client during query 21:24:52.054374 IP pc.external.com.43845 > dns.example.com.53: 6142+ A? foo.example.com. (45) 21:24:52.104694 IP dns.example.com.29242 > pc.external.com.43845: UDP, length 95

    Read the article

  • threading and getting COM port of attached phone

    - by I__
    i have the following code: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.Threading; namespace WindowsFormsApplication1 { public partial class Form1 : Form { public Form1() { InitializeComponent(); } public class ThreadWork { public static void DoWork() { } } private void Form1_Load(object sender, EventArgs e) { ThreadStart myThreadDelegate = new ThreadStart(ThreadWork.DoWork); Thread myThread = new Thread(myThreadDelegate); myThread.Start(); // Begin communications serialPort1.Open(); serialPort1.Write("AT+CMGF=1\r\n"); //Thread.Sleep(500); serialPort1.Write("AT+CNMI=2,2\r\n"); //Thread.Sleep(500); serialPort1.Write("AT+CSCA=\"+4790002100\"\r\n"); //Thread.Sleep(500); } private void serialPort1_DataReceived_1(object sender, System.IO.Ports.SerialDataReceivedEventArgs e) { string response = serialPort1.ReadLine(); this.BeginInvoke(new MethodInvoker(() => textBox1.AppendText(response + "\r\n"))); } } } what i am trying to do is send AT COMMANDS to my phone which is attached to the computer through USB how do i know how to configure the properties of the serial port? (like which COM is the phone on [it's attached through USB], what about baudrate and databits?) when i run the program nothing really happens, i would like to send AT COMMANDS to my phone and the textbox is there to receive the response from my phone this is my first time using threads. am i using them correctly? what is the purpose of it in the current example? is it to just have a delay between send a response? what am i doing wrong?

    Read the article

  • c# threading and getting COM port of attached phone

    - by I__
    i have the following code: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.Threading; namespace WindowsFormsApplication1 { public partial class Form1 : Form { public Form1() { InitializeComponent(); } public class ThreadWork { public static void DoWork() { } } private void Form1_Load(object sender, EventArgs e) { ThreadStart myThreadDelegate = new ThreadStart(ThreadWork.DoWork); Thread myThread = new Thread(myThreadDelegate); myThread.Start(); // Begin communications serialPort1.Open(); serialPort1.Write("AT+CMGF=1\r\n"); //Thread.Sleep(500); serialPort1.Write("AT+CNMI=2,2\r\n"); //Thread.Sleep(500); serialPort1.Write("AT+CSCA=\"+4790002100\"\r\n"); //Thread.Sleep(500); } private void serialPort1_DataReceived_1(object sender, System.IO.Ports.SerialDataReceivedEventArgs e) { string response = serialPort1.ReadLine(); this.BeginInvoke(new MethodInvoker(() => textBox1.AppendText(response + "\r\n"))); } } } what i am trying to do is send AT COMMANDS to my phone which is attached to the computer through USB how do i know how to configure the properties of the serial port? (like which COM is the phone on [it's attached through USB], what about baudrate and databits?) when i run the program nothing really happens, i would like to send AT COMMANDS to my phone and the textbox is there to receive the response from my phone this is my first time using threads. am i using them correctly? what is the purpose of it in the current example? is it to just have a delay between send a response? what am i doing wrong?

    Read the article

  • Data transmission through USB

    - by ASHOK
    I want to develop code to transmit data from system to PIC through USB. Can anybody give good link regarding data transmission through USB. because i am new to this. NOTE: Very simple is code is enough to me. Thanks in Advance

    Read the article

  • Reading from an USB barcode scanner

    - by roman
    Hi, I've got this nice USB barcode scanner and I'd like to readthe input using the USB driver and not the keyboard input. How can this be accomplished using .NET? any ready libraries? I couldn't find anything of real use... Thanks!

    Read the article

  • Continual "The Windows Filtering Platform has blocked a connection" errors?

    - by Richard
    Our systems have been compromised by something recently which has lead us to carry out a more detailed look at what is happening on our workstations. I have noticed an issue where the Security log of this Windows 7 workstation is continually logging a security "Audit Failure" where the detail is that "The Windows Filtering Platform has blocked a connection". This is happening thousands of times a day and would appear to be our BT Business Broadband HGV 2700 ADSL router attempting to connect to Port 137 (NET Bios) on my workstation and being blocked. This has unfortunately had the effect of filling up the log files so much that anything which might have been of use which was logged over the weekend to help debug the intrusion has been "overwritten off the end" of the Security log. (I've since increased the log file size limits massively and turned on archiving). Does anyone know if this is standard behaviour of a BT ADSL router or whether this indicates that the router is compromised in some way or malfunctioning, or have any further suggestions as to how to diagnose this problem?

    Read the article

  • Tunneling a TCP/IP Connection through Remote Desktop Connection

    - by Kristopher Johnson
    There is a remote Windows server on a private network which I can connect to via Remote Desktop Connection. I would like to be able to make TCP/IP connections from my computer to other computers on that server's network. Remote Desktop Connection makes it possible to share printers, drives, and other local resources through the connection. Is there any way to "tunnel" a TCP/IP connection via RDC? I'd like something similar to the port-forwarding provided by SSH. I don't see any way to do this via RDC, but I'm hoping the capability is there and I just don't know about it.

    Read the article

  • Cisco Spam Blocker, Iron Port, Lotus Domino, Integration Help

    - by NickToyota
    Hi serverfault universe, I work for a medium sized (roughly 200 user) company. We are attempting to intagrate our new Cisco Spam Video Blocker (ironport) device into our network so that it acts as an incoming filter then passes it off to our Lotus domino mail server. And also vise versa. The way our network is setup currently has an mx record pointing to our Domino mail SMTP incoming server which is currently setup to be an inbound gateway and filter (using symantec domino mail software). We want to replace the inbound gateway with the ironport. Our company has also invested in a pool of external IP addresses which I believe has been currently assigned to our web, email, servers. What would the proper course of action be to successfully integrate the device be? Mx record change? Replace the domino gateway completely with the ironport? We attempted to set the ironport device to the external IP of what our mx record is pointing to without much success. Any help on proper setup would be greatly appreciated.

    Read the article

  • Dual monitors through 1 HDMI port

    - by Carlos
    I currently have a Dell Studio XPS 13 laptop connected to a 24" HP monitor (w2448hc). Im thinking on getting a second one, however am wondering what i need for the setup (hardware wise). Also I was wondering it there is any down side to it, or something i should be aware of. For example, image quality loss, GPU overloading, or anything important I should know. More than anything Im interested in your advice. Also the monitors do have built in speakers (HDMI sound output), is the sound going to be reproduced by only one monitor or both? Specs Model: Dell Studio XPS 13 OS: Genuine Windows® 7 Home Premium 64-Bit CPU: Intel® CoreTM 2 Duo P8600 (2.4GHz, 3MB L2 Cache, 1067MHz FSB) Chipset: NVIDIA® GeForce® MCP79MX RAM: 4GB 1067MHz DDR3 SDRAM Graphics: SLi NVIDIA® GeForce® 9500M - 256MB Thanks for your advice, if there is anything additional i need to buy an you have a personal preference pass the brand name so i can check it out. Thanks!

    Read the article

  • Dual monitors though 1 HDMI port

    - by Carlos
    I currently have a Dell Studio XPS 13 laptop connected to a 24" HP monitor (w2448hc). Im thinking on getting a second one, however am wondering what i need for the setup (hardware wise). Also I was wondering it there is any down side to it, or something i should be aware of. For example, image quality loss, GPU overloading, or anything important I should know. More than anything Im interested in your advice. Also the monitors do have built in speakers (HDMI sound output), is the sound going to be reproduced by only one monitor or both? Specs Model: Dell Studio XPS 13 OS: Genuine Windows® 7 Home Premium 64-Bit CPU: Intel® CoreTM 2 Duo P8600 (2.4GHz, 3MB L2 Cache, 1067MHz FSB) Chipset: NVIDIA® GeForce® MCP79MX RAM: 4GB 1067MHz DDR3 SDRAM Graphics: SLi NVIDIA® GeForce® 9500M - 256MB Thanks for your advice, if there is anything additional i need to buy an you have a personal preference pass the brand name so i can check it out. Thanks!

    Read the article

  • HP DL360 G6 NC328i Dual Port Gigabit - Windows Server 2003 R2 Driver Problem

    - by brianjd
    I recently installed Windows Server 2003 R2 (64) on a DL360 G6 without using the SmartStart CD (it didn't like the MSDN media). But when I attempted to install the network drivers post-install using the packages from the HP website, I wasn't successful. Though I selected the correct package, the installer reported I did not have the necessary hardware configuration. Has anyone had a similar experience? Thanks

    Read the article

  • Forwarding MySQL connection with iptables and differents network interfaces

    - by Emilio Nicolás
    I have a PC with Ubuntu as a router. It has a 3G connection with a public IP to the Internet, and there is a private wireless subnet. So it has two active interfaces: ppp0: public IP (WAN) wlan0: private IP (LAN) With iptables I wannt to forward every MySQL connection (port 3306) to a local machine (10.42.43.10) of the subnet. I type these iptables commands: iptables -A PREROUTING -t nat -i ppp0 -p tcp --dport 3306 -j DNAT --to 10.42.43.10:3306 iptables -A FORWARD -p tcp -i ppp0 -o wlan0 -d 10.42.43.10 --dport 3306 -j ACCEPT But it doesn't work. telnet publicip 3306 fails :-( Any help will be appreciated. Thanks!

    Read the article

  • Make Apache to listen in multiple IPs

    - by Enrique Becerra
    Hi I'm in a big LAN, which is behind a proxy/firewall I'm working with an apache/php/mysql application, which is hosted in a small server besides my workstation. This server is connected to the LAN also and is behind the proxy: The server has a local IP assigned: 10.64.x.x Also, this server has a public IP assigned (or redirected from within the proxy/firewall) which is: 200.41.x.x I can't access public IP from LAN, but I can ping to the public IP from outside the building How should I configure Apache to listen also for public IP and open the 80 port for people accessing from outside the building?. It is set now to Listen 10.64.x.x:80 Thanks a lot in advance,

    Read the article

  • Need help connecting to NAS externally-port forwarding and DDNS newbie

    - by Joel
    Hi folks, I just picked up a synology NAS, and I'm loving it for internal use, but I want to be able to access the NAS externally-both from my iPhone (3G) and from the net. I have a Linksys WRT54G-TM router. My first question is whether I have set up the dyndns correctly. On my computer that is on my network, if I put in mydomain.dyndns.org, I am taken to a password popup and when I enter my router login and password, my router admin page opens up. On the same computer, I get the same results if I use my external IP address, and if I use my internal IP 192.168.0.1 So that is all as expected. However, when I go to my iphone and turn off wifi, and try to connect with 3g to the external IP or the dnydns domain, I just get an error "Safari could not open the page because the server stopped responding". What's up?

    Read the article

  • Problems accessing FileZilla FTP Server from static IP

    - by Kurru
    I'm trying to connect to my FTP server from my external IP address on Comcast Business. On the gateway I've set up port-forwarding on ports 20-21 to my server. Additionally I've forwarded ports 7000-8000 to my server for use in passive mode. In my FileZilla Server application I've set up passive mode to use my static IP and to use the subset of ports listed above. Unfortunately, it doesn't work through the external static IP for some reason, but I can internally. When I try to connect through static IP, the FileZila monitor says Connected, sending welcome message.... 220 FileZillaServer version 0.9.37 beta could not send reply, disconnected My firewall doesn't register any block events and windows firewall is disabled. What am I doing wrong or missing?

    Read the article

  • How can I effectively block torrenting?

    - by Chauncellor
    My WNR1000v3 is serving six people and two of them have decided that despite my warnings they're going to torrent heavily all day. Not dealing with that crap I decided to reserve their IPs and set up port blocking 1000-65535 at all times of the day. However.... looking at the log reveals that stuff is still going through. Half of the entries are saying: [LAN access from remote] from <externalIP>:16001 to 192.168.1.7:18946 Friday, Oct 12,2012 22:47:05 and half are saying: [Service blocked: BlockTorrents] from source 192.168.1.7, Friday, Oct 12,2012 22:46:26 Is this because of uPNP? Or does the 'block services' feature Netgear has only work with outgoing connections? Is there something that I'm missing? If it is indeed uPNP, how could I effectively block their torrenting without hurting everyone's use of services like Skype, Playstation Network, etc.?

    Read the article

  • I cannot access my mongodb from internet ,Anybody can help me?

    - by VicoWu110
    I am using Mongodb database ,which is installed in my ubuntu with the ip address 126.22.252.25. The ubuntu version info is Ubuntu 12.04.3 LTS. My mongodb use the default 27017 port .On this local machine , I can use command "mongo --host 126.22.252.25" on the local machine to access, but I cannot use this command on any other linux mathine to access the db,nor can I use "telnet 126.22.252.25 27017" on my windows machine.I am sure 126.22.252.25 machine is accessable from internet because I can use winSCP and secureCRT to login to it.I run command "netstat -tnlp" , it shows below: tcp 0 0 0.0.0.0:27017 0.0.0.0:* LISTEN I have already change the /ect/mongodb.conf file , modifying bind_ip parameter from 0.0.0.0 to 126.22.252.25 So ,anyone can help me?

    Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >