Search Results

Search found 4721 results on 189 pages for 'traffic'.

Page 134/189 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• Proxy - Some general questions

  - by user68802

  Is it possible to accomplish the following scenario with a proxy server? We are having one internet facing server that we want to put behind a proxy for some reasons. We want everything to work as before. When they do a request all connections will be forward to the internal server which will send back the information through the proxy. We want to be able to change to proxy to show an maintenance page whenever we are doing maintenance and change it back to forwarding traffic when we are done. We do also want to be able to keep forwarding all users that are using the sites but show an maintenance page for all new users for a time before showing the maintenance page for everyone in order to give the users some time to finish their work before kicking them out.

  Read the article

• Eliminate single point of failure for webservers?

  - by George Bailey

  I know in DNS, that each of the DNS servers will be tried to see if they will respond I know in email that in the event of a failure it will go to the next one in the list or it will hold the mail for a period of time As far as I know,, in webservers,, the browser will get one of the webserver IP addresses and try it and if it fails it will give up. Is this correct? If so,, then the only way to direct traffic away from a failed IP address would be with the DNS servers.. and even that would not update immediately?

  Read the article

• Issues connecting to a pix 501 via console cable

  - by Bourne

  Have a pix 501 that was set up to do filtering and I was working on setting the vpn up when I lost ssh connectivity. Looking at the front, all 4 lan lights blink intensely green but in a very repetitive pattern. The funny thing is there are only 3 devices connected to the 4 ports so that's the first element that doesn't look right to me. Console cable light doesn't turn on when cable is plugged in and have tried rebooting it many many times to see the bootup sequence with no result. Also, I cannot connect to it via pdm or console but the traffic is permitted through. Are there any additional troubleshooting steps I could do or should I count it as dead? Thank you.

  Read the article

• Windows PC's Intermittant Network faults.

  - by Kristiaan

  Hello everyone, im running into some issues with our client PC's (windows xp sp3 systems). this morning we ran into some problems with PC's not connecting to internal / external systems intermittantly. this would manifest as a problem connecting to any service, email, web, backoffice database systems etc. given a random amount of time be it a few minutes etc the problem would disapear and the pc would carry on as normal, some systems however have not been able to connect to certain sytems since the problem initally happened. im hoping for some suggestions / network diag advice really to help me locate the cause of this problem. all the clients are windows xp, connecting to a domain controller that is windows 2003 std this server also acts as a DNS server for us. we also have websense 7.0.1 installed on it to filter traffic.

  Read the article

• Windows updates behind a physical firewall with only IP based rules and generic outbound connections are turned off

  - by user125245

  I have some boxes that I do not want to allow any in or outbound traffic to the internet Except for windows updates. However the fire wall in place (Cisco ASA) apparently only supports ip based rules. As best I can tell access to Microsoft updates via anything other then the half dozen URL masks the Microsoft lists as needed does not appear possible. I have kicked around building a full WSUS that I would then manually copy the update files to so that no direct Microsoft access is needed but this sounds very top heavy for the very few boxes involved. I have also kicked around manual updates all around but am not certain how to be conveniently and confidently sure that the correct updates are being applied in the correct order. Any ideas from any direction would be appreciated. I want this as simple / cost effective as possible but have very little flexibility on the only absolutely required internet access policy.

  Read the article

• Is Apache ReverseProxy to Passenger Standalone an acceptable production deployment?

  - by davetron5000

  I have the need to deploy Rails 3 apps, using RVM and gemsets, and am expecting “public” traffic (i.e. this is not an internal-only app). I also must use Apache as the public interface to my app. I understand that Passenger Standalone can help accomplish the rails/RVM end, and I have successfully set it up in my development environment. My question is how viable this setup is for a production deployment. Is deploying via Apache configured to ReverseProxy to my passenger-powered Rails app going to create problems? Since I'm designing the production deployment now, I want to understand if I should spend the additional time to set up Passenger connected to Apache and have that Passenger communicate with Passenger Standalone instance running my Rails app. So, I'm looking for one of I guess three answers: Apache Reverse Proxy to Passenger Standalone will be generally fine You should not use the Apache/Passenger Standalone configuration, but set up Passenger on the Apache side as well Your entire setup is just Wrong, please RTFM (and include link to "FM")

  Read the article

• Under what circumstances might an IIS6 website be automatically deleted?

  - by E. Anderson

  Late last week my colleagues did some hardware maintenance on one of our vmWare esxi servers. One of the guests is a Windows Server 2003 Web Edition system that runs our low-traffic web sites. We discovered this morning that one of those websites was no longer working with what appeared to be an SSL error. After logging in, I found that the web site in question had been deleted from IIS! Is it possible for this to happen without a user actually going in and deleting that single web site? All of the other sites were fine. The files for the site in question had not been touched. I just re-created the web site, assigned the SSL cert, and everything was working again. When I logged in, I did see the 'Unexpected Shutdown' dialog.

  Read the article

• IPTables: allow SSH access only, nothing else in or out

  - by Disco

  How do you configure IPTables so that it will only allow SSH in, and allow no other traffic in or out? Any safety precautions anyone can recommend? I have a server that I believe has been migrated away from GoDaddy successfully and I believe is no longer in use. But I want to make sure just because ... you never know. :) Note that this is a virtual dedicated server from GoDaddy... That means no backup and virtually no support.

  Read the article

• How does Heartbeat determine when to switch to the secondary? Can you force it to switch?

  - by John

  I've been trying to understand exactly how Heartbeat works - I understand how when one server dies, it switches to the backup. But, for me, it also switches when the primary has a large increase in workload. But, it doesn't always switch at the same value. There doesn't seem to much information on the web about how it works. The best I've found is this article. How does Heartbeat determine when to switch to the secondary, and how does it determine when it switch back to the primary? Is this an editable setting, and can I force it to switch between one and the other? Sometimes when Heartbeat will switch to the secondary, it takes a few days or I've even seen two weeks before it switches back to the primary. This is well after the primary traffic has gone down. I'm currently using BlueOnyx, and my Heartbeat settings are: Auto Failback: on Keepalive: 1 seconds Warntime: 10 seconds Deadtime: 20 seconds Initdead: 30 seconds

  Read the article

• send mail via smtp on debian 6?

  - by acidzombie24

  i followed this tutorial http://library.linode.com/email/exim/send-only-mta-debian-6-squeeze?format=print When i got to the end, i sent the email to [email protected]. I didnt receive it. I didnt get spam either, i got nothing. I also didnt get an error message on the console. How do i properly sent up a smtp server and send an email from it? I'll not i am testing this on my VM on my local computer. My ISP doesnt block any traffic whatsoever (which is one reason why i use them) so... what can i do? i also tried this tutorial

  Read the article

• Can't get iptables firewall working correctly

  - by Jay

  I'm setting up a new Centos 5.6 system and can't get my iptables firewall to work correctly. it won't let me use SSH through it. I'm new to Centos but not to Linux or iptables. I've been removing things until I have isolated the problem. I set up the firewall with a default ACCEPT rule for the INPUT chain. I can connect through to the server fine. If I change the command to only allow traffic from the interface connecting to my trusted network it stops working. Working: iptables -A INPUT -s 0/0 -d 0/0 -j ACCEPT Failing: iptables -A INPUT -i eth0 -s 0/0 -d 0/0 -j ACCEPT I've double checked the ip address I'm using corresponds to eth0 using ifconfig. Any ideas where I went wrong?

  Read the article

• Windows 2008 R2 Not resolving IP's or domains

  - by InsaneAR

  I have two servers with Microsoft Windows Server 2008 R2 x64, and today I realized that one of them don't resolve IP's or domain names. If I ping the same machine IP, it respond, but if I ping an external IP (like 8.8.8.8 or any other) it does not work. The same with domain names. At Windows Event Viewer I'm having Warning 1014: Name resolution for the name timed out after none of the configured DNS servers responded THE SERVER HAS CONNECTIVITY, I'm connected remotely and the services and incoming traffic (like FTP, etc) are working OK. Things I've done & tested: Run Kaspersky Virus Removal 10 Restart/Turn off the DNS Client service Clean the hosts file Reboot the server Turn off the Windows Firewall (there's not another firewall) Quit or replace the current DNS servers I just can ping the same machine IP or the gateway! Can anybody help me?

  Read the article

• Can only connect to sql server express 2012 via named pipes

  - by YetAnotherDeveloper

  I have sql server express 2012 installed on windows 2008, locally everything works just fine i can connect via tcpip and named pipes. Remotely i can connect with ssms only using named pipes. I have tried disabling the firewall on both sides to eliminate blocking traffic. i have toggled the tcpip setting on and off (i read somewhere that they got it working just but flipping them off and back on). I have double/triple checked all the settings that i'm aware of and everything seems to be correct. Tcp is enabled Tcp port is set to 1433, udp port is set to 1434 Server has static ip Start up log says: Server is listening on [ 'any' 1433]. Firewall rules are in place Any suggestions on things that i can look into? i have really just run out of ideas.

  Read the article

• How can I tell if my ISP is redirecting my DNS queries?

  - by Nack

  I've attempted to use some DNS services like OpenDNS, and no matter what I do the DNS queries don't return the expected results. Watching the packet traffic on my firewall, I can see the queries go out to the intended DNS server address and responses coming back, but the results are not as expected, for example, the OpenDNS test page always fails even though the requests appear to be going to their servers. I suspect my ISP is intercepting DNS queries and sending them to their own servers. Is there a way to verify this? Is there something else I might be missing? I'm using 3G wireless service from Sprint.

  Read the article

• htaccess rewrite condition old site to new site with querystring

  - by Brandon Braner

  I am not even going to pretend to fully understand how htaccess rewrite conditions work. I've been working on this for a while searching and searching. I have an old Wordpress site www.old-site.com and a new site www.site.com. Wordpress uses query strings page_id=# to redirect to pages. On the old site page_id=2 went to a specific page but on the new site it goes the the home page. I need old-site/?page_id=2 to go to site.com/our-company Here is what I am trying RewriteCond %{HTTP_HOST} ^(www\.)?old-site.com$ [NC] RewriteCond %{QUERY_STRING} ^page_id=2$ RewriteRule ^(.*)$ http://www.site.com/our-company/ [R=301,L] If I take out the rewrite condition for query string it redirects all traffic from old-site.com to the company page on the new site. Where am I going wrong? I have about 15 redirects I need to do this way.

  Read the article

• Network Share unavailable after DNS Change

  - by Justin Largey

  Hi, I have a server, called Server1 with various network shares on it. Our users map to this share using \\Server1\FileShareName1. During a DR Test, we rerouted all network traffic from Server1 to Server21. All folder shares are set up on Server21. We were hoping the the network shares would still be accessible using \\Server1\FileNameShare1, unfortunately, they are not. Does anyone know why this is happening? This is a Win2003 Environment, and DNS was flushed. I confirmed that IP addresses are matching between the two servers. Any help or insight is much appreciated.

  Read the article

• .htaccess redirect not preserving http_referer header

  - by CodeToaster

  We're merging with another company, and we want to redirect content from their (Apache) website to our (IIS) site. When traffic arrives at our site, we inspect the HTTP_REFERER, and if the visitor was just redirected from the company's site that we just merged with, they'll be presented with a "splash" page announcing the merger. I've added the line... Redirect / http://www.oursite.com/ ...to their .htaccess, which works fine, except that when the browser is redirected it doesn't send the HTTP_REFERER header. I've tried redirecting with redirect codes 301, 302 and 307 (the default, I believe, is 302) and all have the same effect (redirects fine, but no HTTP_REFERER). Can anyone provide some insight into why HTTP_REFERER wouldn't be included?

  Read the article

• Is it possible to cause artificial network packet loss or latency?

  - by nbolton

  I'm trying to reproduce some issues on a deployed application where the MSSQL server and client are running in two separate machines. I think there may be network issues between the two machines, so I'd like to try and reproduce these conditions on two Hyper-V virtual machines (on the same virtual server). Of course, the network for these virtual machines is "local" so it's actually far from the conditions in a live environment. Is there a program I can run on either virtual machine which will degrade the network performance? Or maybe any other work arounds? For example, one way to reproduce the conditions may be to run the VMs on separate Hyper-V servers in geographically dispersed locations (so the SQL traffic goes over VPN or something) -- but this is a little long winded I think. There must be a simpler way.

  Read the article

• Multicast File copy with Unicast responses

  - by kirbuchi

  I'm trying to do some multicast big file copies over to remote clients on the other side of a satellite link. The idea is to minimize the amount of traffic going up to the satellite. I tried using uftp without luck. The problem is that, even though we can reach clients via multicast from our central Hub, they aren't able to respond to a multicast address (it's not supported by the return link). As uftp needs to respond to a multicast address in order to report any missing packets I'm out of luck. So does anyone have any recommendations or alternatives I can use to do the trasfers? Any tip or pointer would be appreciated.

  Read the article

• Tool to track bandwidth by domain name?

  - by Grant Limberg

  I'm running an Ubuntu 10.04 server that hosts several domain names. All domains point to the same IP address and use the same network interface. I'm really only concerned with the main domain name such as my-domain1.com and my-domain2.com. It should include subdomains such as www.my-domain1.com with the totals for my-domain1.com. Is there a tool out there that is configurable to track bandwidth usage on a per-domain name basis? Edit: I'm not looking for only web usage. I'm looking for all traffic.

  Read the article

• I know this is a stupid question but... How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• Troubles doing transparent proxy for virtual machines

  - by Dan H

  Hi iptables gurus. First here is the basic topology: Internet | Gateway | Workstation---eth0---virbr0 | +-----+-----+ | | | vm1 vm2 vm3 I need to test a traffic analyzer running on my workstation, listening on some port (say 8990) on eth0. The rule [I think] I want is "any packets leaving virbr0 going anywhere to port 80 must instead go to port 8990 on eth0". My software running on port 8990 does its own check of the NAT packet mangling to push the packets through after it inspects them. I've been banging my head on this, with different variants of: iptables -t nat -A PREROUTING -i virbr0 -p tcp --dport 80 -j DNAT \ --to 10.0.0.10:8990 And I've tried the more generic method of using the mangle table with --set-mark and ip rule add fwmark, but I'm not getting it. I guess what's confusing me is that everything runs on the same box. Thanks for any guidance.

  Read the article

• Can't access server from external IP

  - by Mathias

  I have a problem with my web server; I can't access it from the external IP address. I'm using an IIS 7 server, but I've tried with apache on Linux as well. I have forwarded all traffic on port 80 to my computer, but it just won't work. I've done port forwarding with my Minecraft server, and it did work, but when I try it with a web server, no. I've been looking on many many forums, but their methods don't work for me. My router is a Speedport W 723V, if anyone knows that one. Any help is appreciated.

  Read the article

• Authenticating SSL in Paros Proxy

  - by Chevi

  I need to inspect some traffic from my iPhone to debug an application, which is going and coming from an https address. Since I don't have a Mac at the moment, I tried with Paros proxy, which I had used before. It's working fine with http connections, but whenever I try to open a website with SSL encryption in Mobile Safari it says that the certificate is not trusted. I can "Continue" and it would work, but not on Applications. How can I set up a trusted certificate with Paros and the iPhone? Thanks in advance, Alex UPDATE: I'm going to try and create my own SSL certificate for testing with Windows' MakeCert UPDATE 2: For some reason I could get Windows SDK to install, so I haven't tried this yet...

  Read the article

• VPN pre-shared key problems

  - by Owl

  I have two vpns set up on a Symantec Gateway Security 320. VPN 1 goes to a Symantec Firewall/VPN 100 to another clinic of ours and every hour they lose connectivity and the error log on the Firewall/VPN100 shows an invalid pre-shared key error, although, both devices show the same pre-shared key entered. VPN 2 goes to our software vendor to use an additional part of our program. I am unable to ping the remote address and so is the other company, but my VPN status shows it is connected. They have told me the pre-shared key seemed to be automatically trying to resubmit itself as if it were incorrect, about every hour even though it is correct. They also told me port80 traffic was closed but I show the HTTP service using 80 redirected to 80 in my firewall settings. Please help.

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >