Search Results

Search found 9244 results on 370 pages for 'thinking sphinx'.

Page 135/370 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

• SMTP IP - Bad reputation, how do I work around?

  - by Louis van Tonder

  I recently had a spamming incident and got listed on a blacklist. I have rectified the issue, removed from the blacklist, but my IP reputation is now classified as a high volume sender. What is the best way to rectify this? I have an additional IP address. I am thinking configure my server to make outbound SMTP connections using the other IP. My questions are: How long does it take for my reputation to stabilize again? How do I configure my server/mailserver to use a specified outbound IP? Setup: Server 2008 Web hMailserver 2 IPs configured on one NIC Cloud based server Your urgent help would be greatly appreciated. Cheers

  Read the article

• From a quality perspective, what is better: Turning volume up in the software, in the OS, or on the speakers?

  - by Qqwy

  I kept thinking about this, and out of sheer curiosity, I decided to ask: If music isn't loud enough. How do I get the best quality?(Even if the difference is in fact so small it's neglectible) By making the music louder in my music player, game or other sound-producing software program. By raising the volume at the Operating System level (for instance, by clicking the 'speaker' icon on the windows bar and turning the volume up) By turning the volume up on the Amplifier or Speakers that are attached to your computer, and thus changing the volume on the 'hardware' Does programs vs OS matter? Does software vs. hardware matter? Thanks, Qqwy

  Read the article

• new ubuntu server installation - java server not receiving packets

  - by James

  I have developed a Java server which listens for UDP packets which come from mobile devices. At the moment, it works correctly if I run my Server on my windows PC. I can receive and respond to the UDP packets sent from my phone (over 3g, not wifi). However, I am trying to run the Server on a different computer which I found lying around my house. I have basically done a clean install of Ubuntu Server edition, updated it, installed the java run time environment and configured port forwarding to allow connections on the appropriate port. I have also tried to disable the firewall. The problem is, it doesn't appear as if the server is receiving any packets and I've exhausted my brain thinking on how to solve/debug the problem. Can anyone suggest to me what the problem might be? or more likely something I can do to help me find out more information about what is going wrong.

  Read the article

• Data Archiving vs not

  - by Recursion

  For the sake of data integrity, is it wiser to archive your files or just leave them unarchived. No compression is being used. My thinking is that if you leave your files unarchived, if there is some form of corruption it will only hurt a smaller number of files. Though if you archive, lets say all of your documents, if there is even the slightest corruption, the entire archive is unrecoverable. So whats the best way to keep a clean file system, but not be subject to data corruption.

  Read the article

• What is the best policy for user account on a Windows 7 Media Center shared by the whole family

  - by Matt Spradley

  What is a good way to manage user accounts for a Windows 7 Media Center PC that is part of an entertainment center for a family? Each family member keeps most of their personal stuff on their own computer. I was thinking the simple approach would be to create an admin account for management and then just create a "Family" user account w/o a password that is the default account used by the media center. This account would be used for the PVR, playing blu rays, music, etc. I don't think it is practical for someone to have to log in every time they use the media center.

  Read the article

• CPU Affinity on ARM processors

  - by dsljanus

  I am using some RaspberryPI boards for a data acquisition system. They are nice boards, with plenty of community support around them, but they are really slow. I am thinking of gradually replacing them with ODROID multicore boards, with the Samsung Exynos processors. I have some experience using taskset to set CPU affinity on my servers because I am always running Node.js applications that are by definition single threaded. Now, is it possible to do this on an ARM board? I do not see why it would not in theory, but I have doubts over how well it is going to work. Does anyone have experience with this kind of hack? Also, I would appreciate any comments about ARM CPUs and how they differ from x86.

  Read the article

• Looking for Mini itx capable of running Photoshop + Illustrator (cs4 or higher)

  - by drozzy

  Ok, so I want to build a small pc for my gf that she can take with her instead of the crappy laptop that she has. Overall I think the complete system should not weight more than 10 lbs. The requirements are to run at least 4 applications simultaneously, and be able to switch between them with no problems: Photoshop Illustrator Word editor Browser Should be able to handle 1920x1200 resolution. I am currently looking at LGA775 socket as I can just transfer my desktop cpu Q6600 to it. Currently deciding between DQ45EK and DG41TX, but any other suggestions are welcome. So I am thinking something along the lines of: MINI-BOX M350 Case with 90 watt psu Q6600 cpu (my desktop cpu) 2x2GB kingston ram (or similar) Video? Need external or built-in G45 on DQ45EK will do? My primary concern is whether the 90WATT is sufficient of the Q6600? Thanks

  Read the article

• Nexenta under KVM?

  - by Nick

  I have an Ubuntu Server running KVM. I'd like to get the benefits of ZFS so I was thinking of installing a virtual machine under KVM running Nexenta (or NexentaStor), allowing that virtual machine to have raw access to a couple of physical hard disks, and then having it share its file system with NFS so that Ubuntu can access it. I've never tried setting up KVM so that the virtual machine has access to physical drives. Does this sound feasible, and is there anything I need to watch out for? Has someone already documented something like this? Does Nexenta/ZFS function basically as well in the virtual environment as if they were running base bones? I can take a small performance hit, but I don't want it to not be as reliable because of the virtualization. Thanks.

  Read the article

• Update a war on Tomcat start up

  - by pater

  I want to setup an update process for an application running on Tomcat. The server which hosts tomcat is only open during working hours (it is an intraner application for a small company). I was thinking that I could upload the new war to the server and set up "something" to run on the next server boot. This something could be a bat file that will be executed on server start up but before the start up of the Tomcat service and it will delete the old war and its exploded folder. When I update manually the war I also delete the work folder of Tomcat (just to be sure). I know about hot deployment but I do not consider it an option since I am not very sure for the implications it might have on the users current working sessions. Is there a way to run such a bat file before Tomcat start up or an alternative way to do this update? Tomcat version isn't an issue. Now is running Tomcat 6 but I can upgrade to version 7 if needed.

  Read the article

• Limited access to Amazon S3 buckets

  - by Tomas Markauskas

  Is it possible to somehow limit the access to an Amazon S3 account. I don't really like the idea of distributing my secret access key to all of my applications, that want to access just a single bucket on my account. If someone gains access to one of the applications, I could loose all my data stored on S3. One way I was thinking to do it would be creating a second S3 account and give it access to just one bucket of the main account, but it's not really a great solution. Another nice thing for me would be to give the secondary account only write (but not modify/delete) and read access. That way I could upload backups or other files and be sure, that they won't get lost.

  Read the article

• What would you use to keep track of all the random information about your LAN/Enviroment?

  - by agnul

  Say you work in your average anarchy... no appointed IT guy, no Office-Manager whatsoever, just developers working in free-for-all mode and a couple of non technical people around for admin (non IT) stuff. What would you use to keep track of Hardware / Software inventory Backups of OS images, Drivers, and all that LAN configuration information Passwords for all the systems Currently I'm thinking of having some sort of wiki + web server on our only ''server-class'' machine, but then I fear I'd be the only one who would go through the hassle of adding information in the wiki... So, have you been through that? What would you suggest?

  Read the article

• Should a neglected iPhone still be used?

  - by Ben Griswold

  I replaced my first iPhone (upgraded from version 1 to 3G) about 18 months ago. Since the upgrade, my original iPhone has been just sitting on shelf in my office. I am thinking about dusting off my old iPhone, reactivating through AT&T and giving it to my wife. The phone hasn't been used for quite some time and the battery is completely dead. I'm not sure about iPhone battery lifetimes, but I'm questioning whether a charge will keep. Should I invest in a new iPhone or take a chance reactivating the old one?

  Read the article

• why do Vagrant docs suggest using public IP address 33.33.33.10 for local VMs?

  - by Gert

  I'm following a tutorial to set up vagrant (a tool to build and configure portable virtual machine images), and it seems that vagrant documentation suggests using IPv4 address 33.33.33.10 to configure a new box. That is a publicly routed IP adress, so I'm a bit confused why using this address is suggested. Since I don't own this network, I should not use an address from the 33.33.33.10/8 range. Am I correct in thinking that I should only use either a public address from a network I own, or an address from one of the private ranges as defined in RFC 1918? If so, why does Vagrant documentation suggest otherwise?

  Read the article

• How to see whats taking up space on your hard drive

  - by sam

  Im thinking of switching to one of the macbook pro retinas with a 256gb ssd, im making the move from a 512gb hd, which at the moment is split into a 60bg windows partition (which i dont think im going to have on my new machine) and a 440gb main partition of the main partition ive got 140gb free. So all in if i disregard the 60gb windows part ive got about 200gb free so im using 300gb, which is still a bit to much, ive had this machine 4/5 yrs so its likely to be clogged with files that i no longer need, is there a tool that i can use to view my current hd and see whats taking up the most room, so i can begin to see where i can cut down ? just for a bit of background my current machine runs osx.

  Read the article

• Why does my PC sometimes think I am constantly pressing the control key?

  - by David Faux

  I was browsing the web with Chrome and pressed f. A search box appeared. I then pressed s, after which Chrome asked if I wanted to save the web page. I soon realized that my PC was thinking that I was constantly pressing the Ctrl key regardless of what program I was using. In response, I tried clicking both of my Ctrl keys a few times to no avail. This problem arises sporadically as I work. I am not sure what is triggering it. Why could this problem be occurring? Is it the keyboard or software? How should I respond?

  Read the article

• machine crash when connecting to external harddisk

  - by Gnot

  i recently had a problem with my laptop. when i booted up the machine, i would get a SMART failure error message and when i pressed F1 to continue, it would take a very long time to boot and it would come back to the same error message again. thinking that my hard disk was dying, i bought a new hard disk and installed on my laptop and so now my laptop is alright. however i need to recover data from that old hard disk, so i bought an external hard disk case and placed the old hard disk onto the case and connected to my laptop with USB. the first few times when i connected, i could see the files from the old hard disk and managed to copy some files over although it took extremely long to transfer. but now whenever i connect to the old hard disk, after a few minutes, my laptop will crash and re-boot. do you think my old hard disk is dead beyond repair? or you can offer some help here? any assistance would be appreciated!

  Read the article

• Determine Server specs for a Rails with MySQL database (on AWS)

  - by Rogier

  I developed a intranet applications with Rails (3.2) for one of my customers. There will be around 30-40 employees working with it. Backend is MySQL (5). What would be the best way to determine the servers specs needed? Given: max. load will be roughly 2400 (40*60) HTTP requests (mixed GET / POST) per hour. 15% of these calls are JSON calls (iOS) avg request will make between 5-10 database calls 500-800 SQL INSERTS per day webpages are fairly simple (no images, just text) avg webpage is 15 request (css/js/etc) and total size is 35-45 KB More specific, since they need access from multiple geographical locations, we are thinking of running a bitnami Ruby stack in the AWS cloud (uptime is important). Any thoughts on a AWS Instance (small/medium) and Utilization (light/medium/heavy) ? Thanks!

  Read the article

• FreeBSD after motherboard replacement; should I have any concerns?

  - by cc

  So after three years my motherboard (Asus M2N-0MX) has died off. As I go shopping for i's replacement tomorrow I have a concern about the data that I currently have on the drives wtihin. I'm currently running BSD 6.2, and am wondering if there would be any concern with installing a new OS on that system, would it be better to jsut install the latest BSD version, and are their any pitfalls that I should watch for to make sure I don't end up losing 750gb's of data. The setup consists of the following(to the best of my knowledge): Pioneer DVD drive 3ware RAID card four 250gb SATA drives in RAID 5 config thanks to anyone that can offer some advice, or just to confirm if I am over thinking things.

  Read the article

• Hosting services on ubuntu server VM

  - by Trevor Hartman

  I've got OSX Server running on a macbook, and I'm looking to run an ubuntu server VM on it via Parallels. I'm thinking about hosting all my apache inside linux, and possibly some other services. I'm curious what a viable config would be, having not done this before. I need to do bridged network right? How do I direct web traffic to the VM instead of OSX? Haven't got my head wrapped around how this works yet so any help would be appreciated.

  Read the article

• cron job executing every minute but should be setup to execute every 4 hours.

  - by Frank V

  Note: I've viewed cron: can’t lock /var/run/crond.pid, otherpid may be 3759 but I believe my question is different (but with the same resulting problem.) I'm very new to cron. I setup a script to run a python script every minute to test that everything was working. I did use crontab to accomplish this. It worked great, so I wanted to switch it to run every 4 hour. I changed my * * * * * {...} to * */4 * * * {...} but the job is continues to run every minute. It's been like this for the last hour or so. When I attempt to run cron restart (thinking that would solve the problem), I receive the following error message: cron: can't lock /var/run/crond.pid, otherpid may be 2311: Resource temporarily unavailable Is my cron syntax wrong? And why might I not be able to restart cron?

  Read the article

• sshd: How to enable PAM authentication for specific users under

  - by Brad

  I am using sshd, and allow logins with public key authentication. I want to allow select users to log in with a PAM two-factor authentication module. Is there any way I can allow PAM two-factor authentication for a specifc user? I don't want users - By the same token - I only want to enable password authentication for specific accounts. I want my SSH daemon to reject the password authentication attempts to thwart would-be hackers into thinking that I will not accept password authentication - except for the case in which someone knows my heavily guarded secret account, which is password enabled. I want to do this for cases in which my SSH clients will not let me do either secret key, or two-factor authentication.

  Read the article

• "No such file or directory" when the file is there

  - by Arlaud Agbe Pierre

  I'm trying to run XPDF on a linux (probably red hat) OVH shared server. I've managed to have ftp ssh access and put the 64 bits binaries onto a folder. The problem is : even though the files are there with the right permissions, if I try running it I'm getting a file not found problem (I'm thinking about a missing link..) Long story short : jurisedi@ssh1:~/xpdf$ file pdftotext pdftotext: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), stripped jurisedi@ssh1:~/xpdf$ ./pdftotext -ovh: jurisedi@ssh1:~/xpdf$: No such file or directory Any ideas ?

  Read the article

• PC reboots spontaenously: debugging tips

  - by aaron

  I swapped my core 2 duo for a quad core recently, and generally things run fine, but every now and then my computer just restarts. I don't even get a blue screen (Vista 32). Core temp isn't a problem. My thinking is that my power supply is inadequate, but I haven't been able to test that (one idea was to under clock the cpu to see if that helped, but going up in speed was the only simple thing to do in the BIOS) Two cases where I semi-consistanly get problems: - Borderlands windowed after some period of time (and some other games, but Borderlands does it pretty regularly) - watching a video (e.g. quicktime/vlc) and having another video running Another thought is non-cpu heat? Maybe the graphics card? Any thoughts on how to track this down appreciated. Thanks!

  Read the article

• Do virtual machines perform better on the host HDD or USB drive?

  - by Jeremy Ricketts

  The question I'm asking is kind of general, and I'll give more specifics about my specific setup. Here's the main question though: Do virtual machines generally perform better on the host HDD or is it better to operate them from an external disk? My specific setup: A Macbook Pro with a nearly full internal SATA drive that spins at 7200. On this system I'm running large programs like Photoshop and some other RAM-intense applications. I've dedicated 2 of my 8 gigs of RAM to my VMware Fusion virtual machine, which runs Windows 7 and Visual Studio, sits on the same drive. When that thing boots up, my system really starts crawling. I have an external USB (specifics of that drive are here) which I'm thinking about moving the VM to. Obviously a USB drive is slower than my internal HDD, but maybe having two operating systems using the same disk is WORSE than putting one of them on a separate (albiet slower) disk. This a bad idea?

  Read the article

• let mysql use full resources

  - by shekhar

  We have a Windows server 2008 R2. It has 24GB RAM and 2.926 Mhz, 8 Core(s), 8 Logical Process. We have a large MySQL database and it's taking a lot of time to execute some queries. But while running queries, I have observed it's NOT utilizing full resources. I am thinking that if I let MySQL utilize maximum resources on my server, it can reduce execution time. How can I let my MySQL server utilize maximum resources in a healthy way?

  Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >