Search Results

Search found 9244 results on 370 pages for 'thinking sphinx'.

Page 132/370 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• Exchange 2010 SP2 OWA performance

  - by Frederik Nielsen

  How do I increase performance in OWA 2010 SP2? I am running CAS on a seperate installation, which has 8GB RAM and 4 CPU cores - running virtualized in a vmware environment. However, the load times are pretty bad, so is there any way to improve those? I am thinking of installing a linux cache-stuff-server in front of the OWA, but will that work? And how should it be done? Allright, I "fixed" it - was just something temporary issue. Thanks for your replies

  Read the article

• How do I burn Xubuntu Live CD

  - by Julian

  I downloaded the 600+ MB Xubunto ISO. Burnt it to a DVD using Nero Burning Rom, as a Bootable DVD. My bootup sequence won't detect XUbuntu and still only detects windows on my Hard Drive even after I set my BIOS to boot from the CDROM first. How do I burn the Live CD with Nero? I'm thinking maybe I should extract the contents and then burn the folder as data to my DVD. P.S: I only have DVDs lying around.

  Read the article

• How do I diagnose a HP Notebook which has hardware issues?

  - by Rob

  My HP DV6t-2300 recently crashed while using FLV Player. It wouldn't start up after this so I had to do a hardware reset (remove power sources, hold down power button ~15 seconds, put back power sources). After this it would turn on, but start up would freeze in Ubuntu, Windows 7, Ubuntu Recovery Mode, and various Linux Live CDs. The only successful way to boot was in Windows 7 Safe Mode. The HP Customer Service was very polite, but they are trying to blame it on a corrupt operating system which is clearly not the case (since I have tried 4 operating systems and none work). I am thinking it might be the GPU since 1) I was watching movies when it crashed and 2) Windows Safe Mode might not use the dedicated GPU. I already ran Memory and HDD tests and there were no detected errors. Any ideas of what's wrong, or suggestions for tests that I should run in safe mode? Should I try reinstalling Windows 7 to convince HP that it's not the OS?

  Read the article

• Isolate user from the rest of the system..?

  - by Shiki

  There is a non-techsavvy user, who doesn't want to learn, and can only use Windows XP or 7. The problem is, that the computer is shared which she would like to use, and the computer stores sensitive, important data. Since she clicks on everything, it's quite a russian roulette. How could I isolate her account from the rest of the system? Like having a profile on the computer (it runs Windows 7 now) which would have the files and other stuff sandboxed? I was thinking of having a dual boot system, but that could compromise the files too, or the boot sector (talking about Windows). Linux is not a way, hence ... see the first line. Is there such a software that can set up a sandboxed environment?

  Read the article

• Recommendation for PCI SATA addon card?

  - by edmicman

  I have a couple of dead PCs from my wife's office that have working SATA HDDs. Sorry, I don't know if they're SATA I or II, just that they're SATA. Unfortunately, all my spare hardware at home is pretty old; all I have is IDE support. I was thinking I could get a PCI addon card on the cheap that would support SATA and put together a budget server of sorts to play with and be able to use those drives. So I've got a couple questions: After some searching it looks like I can get an addon card for ~20 bucks, but it looks like they're all SATA I? Would that matter? It looks like going to SATAII bumps the price up to $40-$60 or so. Are there any recommendations on a card to get?

  Read the article

• How to shuffle pieces of large video files?

  - by Gabriël

  Hi Folks, For a party we want to show film-fragments using a projector. We have around 50 full-length movie avis and would like to shuffle them in shorter pieces. So every ca. 2-5 minutes another piece should begin. For example a sequence could be: Movie05-12m00s-14m30s, Movie08-55m50s-57m00s, Movie02-02m42s-06m40s, etc. So, random movies, at random positions within the movie of random lengths. What would be the kind of solution we're looking for? We were thinking 2 scenarios: Before doing this use some kind of tool to cut all avis in smaller pieces and put them on shuffle in a regular media player A sort of "VJ" program that can do this shuffle mixing realtime. Any suggestions for any of the above scenarios? Thanks!

  Read the article

• Virtualization of desktop

  - by Agares

  Hi! I'm thinking about virtualization of my laptop(for educational purposes). My idea is to install very light host OS and have all the rest as virtual machines. Microsoft's Hyper-V Standalone would be very good solution, but it's impossible to access virtual machine from computer, where the Hyper-V is the host(isn't it?). So, which virtualization software would be good for me? I wanna have virtualized Windows 7(and maybe some other windowses). My processor support Intel Virtualization Technology.

  Read the article

• Configure postfix to filter email into hold queue

  - by Ian

  Hey, I would like postfix to send all emails received on SMTP off to an external process, which will decide whether to allow them through as normal, or whether to put them into the hold queue (or another quarantine area), where they have to wait for admin approval. I was thinking of doing this with an after-queue content filter, which uses pipe(8) to run a script on each message, and the script itself will spawn "postsuper -h " if it decides to put the message on hold. Then the admin can do postsuper -d or -r to delete or pass the message on as appropriate. So, my questions are - a) will this work, and b) is this the best way to do it? Would a milter or another type of content filter be a better approach?

  Read the article

• 2 GPUs (for multi-monitor setup)

  - by A Dwarf

  I have a machine to which I need to connect a second monitor. This machine currently hosts a ATI Radeon HD 4770 with two DVI adapters. The second monitor to be hooked to this machine is a VGA monitor. Until I find a DVI-VGA adpater, I'm thinking installing a second graphics card which does have a VGA adapter, an NVidia card. Can I successfully run both AMD and NVidia cards on this machine? Any specifics I must be aware of, like how to ensure the ATI card to be the main card? Operating system is Windows 7

  Read the article

• Avoiding double NAT with PPPoA connection

  - by user498429

  I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

  Read the article

• Hyper-V networking....still not sure which way to go??

  - by CZhale

  We have our Hyper-V server up and running (Windows 2008 ENT SP2) and started to create some of our VMs. The server has 4 total nics. 2 onboard Broadcom 1gb nic cards and a pci dual port Intel Pro cards 1gb. Right now, I have setup 1 broadcom nic to be the hyper-v host nic, and setup the other broadcom nic for the VMs. We are not using the Intel Nics....should we be thinking about teaming?Link Aggregation?? I just want to achieve the best possible setup for the network, but have read many things for and against teaming the nics?? Thoughts?

  Read the article

• Is it possible to write an htpasswd file that redirects certain users to certain directories?

  - by racl101

  Hi there, Assuming that I have a domain, say, mydomain.com and three directories under it call them dir1, dir2 and dir3, then is it possible to put an htpasswd file at the web root and have it redirect authenticated users to their respective directories (e.g. user joecorleone101 always get redirected to dir3 upon being authenticated.)? First of all I want to know if this is possible and second is it safe or practical (or impractical)? Am I thinking about it the wrong way? Should I maybe use an htaccess file?

  Read the article

• Motherboard max memory supported

  - by Ashfame

  I have an Intel DG965RY motherboard and its specification says it supports 8GB with 533 or 667Mhz RAM sticks and only 4GB with 800Mhz RAM sticks. I am running a 64bit OS. I earlier had 2 X 1GB sticks (800Mhz), so I bought 2 X 2GB sticks (800Mhz) and I underclocked them in the settings to run at 667Mhz. Shouldn't it support all 6GB RAM now? It would be a bummer if I will specifically need 667Mhz sticks thinking that at the worst they will underclock and then run at 667Mhz. I tried this because I saw someone posted at some forum that he put in 4GB+ of RAM in the same board @ 800Mhz and the system uses it all. In my case (On Ubuntu), it only shows 3.2GB as of now (link to Question) so needed to confirm if this is a hardware limitation.

  Read the article

• Will Software RAID And iSCSI Work For A SAN

  - by Justin

  I am looking for a SAN solution, but can't afford even entry level solutions. Basically, the SAN is for development and a proof of concept product. The performance doesn't have to be amazing, but needs to be functional. My buddy says we should just setup sotware RAID and software iSCSI in Linux. Essentially I have a spare server with dual Xeon processors, 4GB of memory, and (2) 500GB 7200RPM drives. It's a bit old but working. I am sure there is reason people don't do software RAID and iSCSI, but will performance be usable? Thinking of configuring the drives in RAID 0 (for performance).

  Read the article

• In TCP/IP terms, how does a download speed limiter in an office work?

  - by TessellatingHeckler

  Assume an office of people, they want to limit HTTP downloads to a max of 40% bandwidth of their internet connection speed so that it doesn't block other traffic. We say "it's not supported in your firewall", and they say the inevitable line "we used to be able to do it with our Netgear/DLink/DrayTek". Thinking about it, a download is like this: HTTP GET request Server sends file data as TCP packets Client acknowledges receipt of TCP packets Repeat until download finished. The speed is determined by how fast the server sends data to you, and how fast you acknowledge it. So, to limit download speed, you have two choices: 1) Instruct the server to send data to you more slowly - and I don't think there's any protocol feature to request that in TCP or HTTP. 2) Acknowledge packets more slowly by limiting your upload speed, and also ruin your upload speed. How do devices do this limiting? Is there a standard way?

  Read the article

• Ways for managing the installation and configuration of various software applications and settings i

  - by EmpireJones

  What are some ways for managing the installation and configuration of various software applications and settings in group of linux development and server computers? Is a set of basic scripts a good means of attack? I was thinking about just having a ton of scripts, such as: setup_dev_env [install|uninstall|reinstall] setup_nfs [...] setup_nfs_share [...] setup_http [...] setup_memcache_node [...] Is there any better method? It would be nice to be able to "upgrade" an installation script too, for example, to change common development settings.

  Read the article

• My PowerShell functions do not appear to be registered

  - by Frank

  Hi there, I have a ps1 script in which I define 2 functions as such: function Invoke-Sql([string]$query) { Invoke-Sqlcmd -ServerInstance $Server -Database $DB -User $User -Password $Password -Query $query } function Get-Queued { Invoke-Sql "Select * From Comment where AwaitsModeration = 1" } I then call the ps1 file by typing it in (it's in a folder in the path, and autocompletion works) However, I cannot start using the functions. I am confused, because when I copy / paste the functions into the console, all is fine and they work. I also have a function defined in my profile, and it works. Where am I thinking wrong, why doesn't it work what I'm trying to do?

  Read the article

• What ports tend to be unfiltered by boneheaded firewalls?

  - by Reid

  Hi all, I like to be able to ssh into my server (shocking, I know). The problem comes when I'm traveling, where I face a variety of firewalls in hotels and other institutions, having a variety of configurations, sometimes quite boneheaded. I'd like to set up an sshd listening on a port that has a high probability of getting through this mess. Any suggestions? The sshd currently listens on a nonstandard (but < 1024) port to avoid script kiddies knocking on the door. This port is frequently blocked, as is the other nonstandard port where my IMAP server lives. I have services running on ports 25 and 80 but anything else is fair game. I was thinking 443 perhaps. Much appreciated! Reid

  Read the article

• Virtualizing OpenSolaris with physical disks

  - by Fionna Davids

  I currently have a OpenSolaris installation with a ~1Tb RaidZ volume made up of 3 500Gb hard drives. This is on commodity hardware (ASUS NVIDIA based board on Intel Core 2). I'm wondering whether anyone knows if XenServer or Oracle VM can be used to install 2009.06 and get given physical access to the three SATA drives so that I can continue to use the zpool and be able to use the Xen bits for other areas. I'm thinking of installing the JeOS version of OpenSolaris, have it manage just my ZFS volume and some other stuff for work(4GB), then have a Windows(2GB) and Linux(1GB) VM (theres 8Gb RAM on that box) virtualised for testing things. Currently I am using VirtualBox installed on OpenSolaris for the Windows and Linux testing but wondered if the above was a better alternative. Essentially, 3 Disks - OpenSolaris Guest VM, it loads the zpool and offers it to the other VMs via CIFS.

  Read the article

• Battery backed write cache behavior upon disk change

  - by Halfgaar

  We use 3ware Inc 9650SE SATA-II RAID PCIe RAID controllers with battery backed write cache. Our spare hardware has the same controller. I was wondering; are these controllers smart enough not to sync the cache when the disks have been changed? For example, if I deploy one of those spare machines by putting in the disks of another machine and that spare machine still has pending writes, will it be smart enough not to perform those writes on the replaced array? Edit: my scenario is not really made clear, so let me give an example: server1 goes down because of power supply failure. I put the disks in server2 and start. I repair server1 I put the disks back from server2 in server1 (it's not relevant right now that in reality I would probably keep server2 running). If server1 doesn't have safeguards, it will write to the array, thinking it's simply powering up again, corrupting it.

  Read the article

• Dropped Dell XPS has hard-drive trouble

  - by Alex B.

  Yesterday, my mom dropped her laptop to the floor and got the blue screen of death after trying to boot the system. I was able to start a Fedora live CD and get some of her stuff off the hard drive, but I cannot seem to be able to install Windows on it. The installation starts loading files and then the computer turns off. I am thinking that she might need a new hard drive. Any ideas? Edit: I actually was able to boot the Windows XP installation but it is saying that no hard disk is detected. How can this be possible if I was able to mount the drive on fedora yesterday?

  Read the article

• Facebook doesn't work on computer, but work on mobile device, both use the same router

  - by sasa

  I have a very strange problem and I'm thinking that can be problem with dns or something similar, but not sure and don't know how to solve. My computer is connected to router and every site works fine except facebook (Chrome and Firefox). Chrome shows "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset." But, on mobile device witch is connected to the same router facebook works fine (Fb application and Delphin browser). Pinging facebook works fine. Clearing cookies and cache didn't help. Also, I performed antivirus and antimalware scan and there is nothing. What can be a problem? Update: I'm also connect notebook on that wifi router, and on it works fine. nslookup facebook.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: Name: facebook.com Addresses: 2a03:2880:2110:3f01:face:b00c:: 2a03:2880:10:1f02:face:b00c:0:25 2a03:2880:10:8f01:face:b00c:0:25 69.171.224.37 69.171.229.11 69.171.242.11 66.220.149.11 66.220.158.11

  Read the article

• Munin "Available entropy" when using address space layout randomization

  - by clawspoon

  Having just configured munin for statistics logging on my gentoo server (hardened profile), I am noticing that my "Available entropy" is consitently in the 200-300 range. This seems way to low, so I checked it manually using the command $ cat /proc/sys/kernel/random/entropy_avail 3544 Odd. Consistently very low values in Munin and practically filled up when checking manually. After thinking about the problem for a while I came to the conclusion that the problem is probably that I'm using Adress Space Layout Randomization which is using the entropy when running commands/programs. Since Munin runs a whole slew of programs all the entropy is used up, and Munin then measures how much entropy there is, resulting in the low values. Does anyone have any experience with this? How can this be avoided?

  Read the article

• external HDD with SATA & USB interface?

  - by Greg

  Anyone know of an external HDD that would have (in addition to USB) a SATA (eSATA) port/cable? i.e. Brand/Model. Preferably one of the name brands so I have a better change of finding it here or locally if possible. Background - In one location I want to use it is I would like to increase the performance by cabling it directly to the PC SATA port, HOWEVER I don't want to have to open up the PC to do this each time. I was thinking of running a SATA cable out through the PC case so I just plug it directly into the external HDD in question. Perhaps it should be also externally powered too so I don't need to run a power cable out from the PC power supply.

  Read the article

• PBX with Fax and Google Voice

  - by Phill Pafford

  Looking to replace/port my home number which I use for mainly faxing for my home business to a PBX server ( Thinking Asterisk or Elastix ). My question is: Does Asterisk/Elastix support Faxing ( Incoming / Outgoing ) Does Asterisk/Elastix support Google Voice Here is what I'm looking to do: Run some sort of PBX software from my own home server that will allow me to use Google Voice for my home number, possibly allow multiple Google voice ( Though I could live with just the one ) and must support Faxing ( Incoming and Outgoing ). Would Asterisk/Elastix support all of this or would you recommend something else for this? Looking to avoid some of the pitfalls that could happen I like Ubuntu if a Linux environment is needed

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >