Search Results

Search found 14182 results on 568 pages for 'andrew answer'.

Page 136/568 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• asterisk extensions.conf & sip.conf

  - by Josh

  I'm trying to get my Dialplan to work. When I call, the only thing I get is a dial tone to enter extension "no Background(thanks-calling) is played". When extension 123 is dialed, busy signal is triggered and asterisk CLI get frozen. Any help will be appreciate it. Conf files below. ; PSTN on sip.conf [pstn] type=friend host=dynamic context=pstn username=pstn secret=password nat=yes canreinvite=no dtmfmode=rfc2833 qualify=yes insecure=port,invite disallow=all allow=ulaw ; PSTN on extensions.conf [pstn] exten => s,1,Answer exten => s,2,Wait,2 exten => s,4,DigitTimeout,5 exten => s,5,ResponseTimeout,10 exten => s,6,Background(thanks-calling) exten => 0,1,Goto(incoming,123,1) ; (Member Services) [incoming] exten => 123,1,NoOP(${CALLERID}) ; show the caller ID info in the console exten => 123,n,Ringing() exten => 123,n,Answer() exten => 123,n,Playback(silence/1) exten => 123,n,Playback(connecting1) exten => 123,n,Wait(3) exten => 123,n,Dial(SIP/line1,60) exten => 123,n,Congestion

  Read the article

• Avoiding DNS timeouts when a dns server fails

  - by Neil Katin

  We have a small datacenter with about a hundred hosts pointing to 3 internal dns servers (bind 9). Our problem comes when one of the internal dns servers becomes unavailable. At that point all the clients that point to that server start performing very slowly. The problem seems to be that the stock linux resolver doesn't really have the concept of "failing over" to a different dns server. You can adjust the timeout and number of retries it uses, (and set rotate so it will work through the list), but no matter what settings one uses our services perform much more slowly if a primary dns server becomes unavailable. At the moment this is one of the largest sources of service disruptions for us. My ideal answer would be something like "RTFM: tweak /etc/resolv.conf like this...", but if that's an option I haven't seen it. I was wondering how other folks handled this issue? I can see 3 possible types of solutions: Use linux-ha/Pacemaker and failover ips (so the dns IP VIPs are "always" available). Alas, we don't have a good fencing infrastructure, and without fencing pacemaker doesn't work very well (in my experience Pacemaker lowers availability without fencing). Run a local dns server on each node, and have resolv.conf point to localhost. This would work, but it would give us a lot more services to monitor and manage. Run a local cache on each node. Folks seem to consider nscd "broken", but dnrd seems to have the right feature set: it marks dns servers as up or down, and won't use 'down' dns servers. Any-casting seems to work only at the ip routing level, and depends on route updates for server failure. Multi-casting seemed like it would be a perfect answer, but bind does not support broadcasting or multi-casting, and the docs I could find seem to suggest that multicast dns is more aimed at service discovery and auto-configuration rather than regular dns resolving. Am I missing an obvious solution?

  Read the article

• Name one good reason for immediately failing on a SMTP 4xx code

  - by Avery Payne

  I'm really curious about this. The question (highlighed in bold): Can someone name ONE GOOD REASON to have their email server permanently set up to auto-fail/immediate-fail on 4xx codes? Because frankly, it sounds like "their" setups are broken out-of-the-box. SMTP is not Instant Messaging. Stop treating it like IRC or Jabber or MSN or insert-IM-technology-here. I don't know what possesses people to have the "IMMEDIATE DELIVERY OR FAIL" mentality with SMTP setups, but they need to stop doing that. It just plain breaks things. Every two or three years, I stumble into this. Someone, somewhere, has decided in their infinite wisdom that 4xx codes are immediate failures, and suddenly its OMGWTFBBQ THE INTARNETZ ARE BORKEN, HALP SKY IS FALLING instead of "oh, it'll re-attempt delivery in about 30 minutes". It amazes me how it suddenly becomes "my" problem that a message won't go through, because someone else misconfigured "their" SMTP service. IF there is a legitimate reason for having your server permanently set up in this manner, then the first good answer will get the check. IF there is no good reason (and I suspect there isn't), then the first good-sounding-if-still-logically-flawed answer will get the check.

  Read the article

• Gmail.com detect mail as spam, but the server is not on any BlackList

  - by Tomer W

  I have an issue with Google. (GMail to be exact) About 1 month ago, we had a security breach, and mail was relayed through our servers. we got listed in almost ALL Black-Lists :( we fixed the problem, and requested removal from Black-lists, which was granted easily. currently (over 3 weeks), we are not sending any spam anymore. furthermore, we got clear from all the Black-lists (MxToolBox Black-List Search Result) But, GMail still refuse to get Anything from the server, stating '550 Spam'. Following, Telnet attempt to send to gmail: 220 mx.google.com ESMTP g47si45436208eep.123 helo megatec.co.il 250 mx.google.com at your service mail from: <[email protected]> 250 2.1.0 OK g47si45436208eep.123 rcpt to: <[email protected]> 250 2.1.5 OK g47si45436208eep.123 Data 354 Go ahead g47si45436208eep.123 Test123 . 550-5.7.1 [62.219.123.33 11] Our system has detected that this message is 550-5.7.1 likely unsolicited mail. To reduce the amount of spam sent to Gmail, 550-5.7.1 this message has been blocked. Please visit 550-5.7.1 http://support.google.com/mail/bin/answer.py?hl=en&answer=188131 for 550 5.7.1 more information. g47si45436208eep.123 Connection to host lost. i tried filling the form @ Gmail - Report Delivery Problem i also tried reaching Google by phone, but the message was to go to the Link mentioned above. I Checked ReverseDNS and is ok... We dont have TLS, but that shouldn't be a problem, shouldn't it? Note: we are not a Bulk sender. Anyone has an idea? what can be blocking our IP? Anyone know whom can be contacted in order to resolve this BL listing?

  Read the article

• How to run a website domain without redirecting if IP is already used for another website? [duplicate]

  - by SSpoke

  This question already has an answer here: Hosting multiple distinct folders for distinct domains 1 answer I bought a VPS Host that gave me only 1 IP Address which I used on my first domain name and it works without any problems. Now my second domain name I can't use the same ip address as it points to the first domain name. So I figured my only option was to use a GoDaddy hosted iframe redirection which redirects to a sub folder on my first domain which worked so far. Now I'm trying to load paypal from <?php headers() ?> and I get a permission error because of that iframe Refused to display 'https://www.paypal.com/cgi-bin/webscr?notify_url=&cmd=_cart&upload=1&business=removed&address_override=1' in a frame because it set 'X-Frame-Options' to 'SAMEORIGIN'. How do I avoid the Iframe solution for my second domain while not messing up my first domain? Somebody I forgot once told me it doesn't matter if you have 1 IP Address you could host multiple websites on it? how it that possible the DNS doesn't seem to work off ports afaik, yes I could host multiple websites on different folders but that's not what I call hosting a real website it has to be pointed by a domain name, so this iframe issue doesn't happen My server configuration is httpd (apache) that comes with CentOS 6 (Linux) operating system

  Read the article

• How to setup Mac server to use two gateways

  - by Brady

  I recently asked this question: How to set Mac server to use different Gateway for internet bound traffic The answer given works but has presented me with another issue that I didnt make clear in that question. Here is my network layout as it stands: At the moment outside staff members use some services on the existing internet 1 link. Those services are hosted by the Mac server. If I change the gateway of the Mac server to the second modem those outside staff lose visabilty on those services. Now I dont know how to go about solving this issue. I want the second link to be used when the Mac server goes to rsync data offsite but everything else use link one. How do I do this? Thanks Scott EDIT: This has been resolved by setting the default gateway on the Mac server to 192.168.1.254 Thus leaving everything on the network as it was before. but to get the Mac server to use the other link for rsync I've added a route to the Mac server to route traffic to the rsync server through the second gateway. sudo route add -net {server IP's}/{Netmask} 192.168.1.1 I've awarded the answer to gravyface for pointing me to a post on how to make this route persistant in Mac

  Read the article

• Migrating email forwarding entries from DirectAdmin to Google App (Free edition)

  - by bobo

  I have a website hosted in a shared hosting account and it contains a DirectAdmin (DA) control panel. From there, I can see some email forwarding entries. I would like to migrate the email server to the Google App's, I am going to change the MX records to point to Google email server in the DA. For the existing email accounts that I see in the DA, I will re-create them in the Google App. But for those email forwarding entries, I am confused. If I keep them there, will they still work after I have changed the MX record pointing to the Google email server? If not, this means I will need to re-create them in the Google App, right? Unfortunately, Google App (Free edition) does not seem to allow email forwarding like those in DA. Unless I choose to use other editons (http://www.google.com/support/a/bin/answer.py?answer=175745). In DA, when I have created an email forwarding entry such as [email protected] - [email protected], I do not really need to create a dummy [email protected] email account and DA will still do the forwarding properly. The best I can do now, without upgrading the Google App edition, is to simply create dummy email accounts in the Google App and setup forwarding inside that email account, is this correct?

  Read the article

• Transfering call asterisk to different context

  - by Necronet

  I have a Small and basic PBX, and with two contexts wich basicly are sales and supervisor both have different roles and privileges. I notice that it is possible to transfer call from the same context but it have been imposible to transfer anything to another context. Any insight, i am kinda a rookie on asterisk but currently there is no one else in charge... Thanks Edit This is the extension.conf [supervisor] include => from-internal exten => _40XX,1,Answer exten => _40XX,n,Set(calltime=${STRFTIME(${EPOCH},,%C%y%m%d.%H.%M.%S)}) exten => _40XX,n,Set(CALLEDNUMBER=${EXTEN}) exten => _40XX,n,MixMonitor(/tmp/Para_${CALLEDNUMBER}-${calltime}-De_${CALLERID(num)}.wav) exten => _40XX,n,Dial(SIP/${EXTEN},40,TtRr) exten => _40XX,n,Hangup [sales] include => out-trunksip exten => _41XX,1,Answer exten => _41XX,n,Set(calltime=${STRFTIME(${EPOCH},,%C%y%m%d.%H.%M.%S)}) exten => _41XX,n,Set(CALLEDNUMBER=${EXTEN}) exten => _41XX,n,MixMonitor(/tmp/Para_${CALLEDNUMBER}-${calltime}-De_${CALLERID(num)}.wav) exten => _41XX,n,Dial(SIP/${EXTEN},40,TtRr) exten => _41XX,n,Hangup and the sip.conf looks like this: [supervisor] username=sales secret=ASUPERSECRETPASSWORD type=peer ..... context=supervisor mailbox=supervisor [sales] username=sales secret=ASUPERSECRETPASSWORD type=peer ..... context=sales mailbox=sales What do you suggest in order to get the supervisor with the same privileges that he already has and the sales been able to transfer calls to him

  Read the article

• How to configure multiple virtual hosts for multiple users on Linux/Apache2.2

  - by authentictech

  I want to set up a virtual hosting server on Linux/Apache2.2 that allows multiple users to set up multiple website domains as would be appropriate for commercial shared hosting. I have seen examples (from my then perspective as a shared hosting customer) that allow users to store their web files in their user home directory with directories to correspond to the virtual host domain, e.g.: /home/user1/www/example1.com /home/user2/www/example2.com instead of using /var/www Questions: How would you configure this in your Apache configuration files? (Don't worry about DNS) Is this the best way to manage multiple virtual hosts? Are there others? What safety or security issues do you think I should be aware of in doing this? Many thanks, folks. Edit: If you want to only answer question 1, please feel free, as that is the most urgent to me at this moment and I would consider that an answer to the question. I have done it for myself since posting, but I am not confident that it's the best solution and I would like to know how an experienced sysadmin would do it. Thanks.

  Read the article

• AWS document on number of databases allowed on an Amazon RDS instance

  - by user35042

  At the Amazon RDS FAQ there is the question "What is a database instance (DB Instance)?". The entire answer (as of mid-June 2012) is: You can think of a DB Instance as a database environment in the cloud with the compute and storage resources you specify. You can create and delete DB Instances, define/refine infrastructure attributes of your DB Instance(s), and control access and security via the AWS Management Console, Amazon RDS APIs, and Command Line Tools. Multiple MySQL databases or SQL Server databases (up to 30) or Oracle database schemas can be created on a given DB Instance. The last part of that quote, "Multiple MySQL databases or SQL Server databases (up to 30) Oracle database schemas" I interpret to mean that you can have an "unlimited" number of databases on an RDS MySQL or Oracle instance but only 30 databases on an MS SQL Server instance ("unlimited" meaning not limited by the RDS infrastructure itself). This was asked in the Stackoverflow question Does Amazon RDS support multiple databases per instance?. The answer quoted an older version of the FAQ. What I am looking for is an Amazon document that clarifies this question, or else someone who has experience using Amazon RDS who can attest what the situation actually is.

  Read the article

• DNSSEC - Ad Flag not activated

  - by Arancha

  Hi all, I have some doubts regarding DNSSEC. I have one server acting as an Authoritative Name Server and another one as a Cache/Resolver. I'm using Bind 9.7.1-P2 and these are my configuration files: Named.conf (Authoritative Server) // Opciones de configuracion del servidor include "/etc/rndc.key"; controls { inet 127.0.0.1 allow { localhost; } keys { rndc-key; }; }; options{ version "Peticion no permitida/Query not allowed"; hostname "Peticion no permitida/Query not allowed"; server-id "Peticion no permitida/Query not allowed"; directory "/etc/DNS_RIMA"; pid-file "named.pid"; notify yes; #files 65535; dnssec-enable yes; dnssec-validation yes; allow-transfer { 172.23.2.37; 172.23.3.39; }; transfer-format many-answers; transfers-per-ns 5; transfers-in 10; max-transfer-time-in 120; check-names master ignore; listen-on {172.23.2.57; 80.58.102.13; 80.58.102.103; 127.0.0.1; }; }; zone "test.dnssec" { type master; key-directory "keys"; file "db.test.dnssec.signed"; also-notify { 172.23.2.37 ; 172.23.3.39 ; }; allow-transfer { 172.23.2.37 ; 172.23.3.39 ; }; }; test.dnssec zone test.dnssec. 86400 IN SOA ns.test.dnssec. mxadmin.test.dnssec. ( 2010090902 ; serial 21600 ; refresh (6 hours) 3600 ; retry (1 hour) 1814400 ; expire (3 weeks) 172800 ; minimum (2 days) ) 86400 RRSIG SOA 5 2 86400 20101009062248 ( 20100909062248 40665 test.dnssec. eY99laB6PrtETaXLdCS+G8Uq1lIK7d5vxUB1 pAQ9npv/YbvX1pdWZKGojDgPGw8V65Q0zKQo YW1VuBzvwfSRKax+yrjJzvHQGfCZPJWARehK hgLxHOfXLVH7tyndvLD49ZKcWtrop+Tuy4n9 apWWfSJZxCOngwS7zUi0zCTKfPs= ) 86400 NS ns1.test.dnssec. 86400 RRSIG NS 5 2 86400 20101009062248 ( 20100909062248 40665 test.dnssec. lmlP/Mb2qEXPSlajgSDn/CqWk/jokVCmqjeo idNuytxbiFnbCOunzvaYpgvDpEr0CPrwXaDL TSnb/w53tZl7GHRImJo50vwwNZljLzNT6CFw aaQXFc3rDLsXjCi+WF0/Z7meteM4jYdx5nrV Qx9pgur7VPbP88bJOqWCPBev2Ho= ) 172800 NSEC a.test.dnssec. NS SOA RRSIG NSEC DNSKEY 172800 RRSIG NSEC 5 2 172800 20101009062248 ( 20100909062248 40665 test.dnssec. E76ayamsAAz8Zcj7060KY0nTFzHPztM/Pkc5 OM0EcP7C5+ocn4L8M2J0rmR3jxfYvCpOk0BQ Zniqn9Aw41Qk068yJ2dfDPwV5zT0+te0nzwC /awJGPMXLzMj4JejYTlTiKfspGDJCG44F+lb lHXdcUhbjXf3loqMQadZFQ/eSn0= ) 86400 DNSKEY 256 3 5 ( AwEAAbQ8qrNN5vetx/7E1VOgXZ7fLqwG1y/i 55hWGCeLbcS95ratT9A6UospOvPSwPTlrFgF RWP67Pubzbsy7/damS1F1+p4GgBQway52Hd1 8HjdHKKC6kIxna9pOJBRfhCdzAsv9LnpRvrw mDpcFAqhdn5k5RqwcUF1eOZrKjxXjAOr ) ; key id = 40665 86400 DNSKEY 257 3 5 ( AwEAAcd4dxWyTgOuqha0DJADUH0pk5jvnwdM ZhgZaqnayUdeTh8U9WOjOUHdVCGywZS6NTVp xXqhcegWzh2ZR5VN6thuhezt7kbzLNWbPe7m YF29/ZTXB6nmdSxruQlSvYhzkWTaPNtfrUnI UlbDRxUFWQkSHj9LA1TG76FpR6uqOj1sNrWX nPb/Hwp1Sb2Ik4FlifKb/Vu1+/UnclRJgfPm p2HGTeNYpfk15JHBPSYxJ1TuedXQIdkPGlQX ISmAeV1evGomCC/x9DNleDHCszJOptwurzRP Z7wRXcWnbXz1BU8rAqvUZL3M4UgdNRR5LLTz CkRnrlvXYJpgzDtgmQxE9Bs= ) ; key id = 59647 86400 RRSIG DNSKEY 5 2 86400 20101009062248 ( 20100909062248 40665 test.dnssec. sa4W3tvl6n0TkIcq3xzhG17C2O0lRhllrpUd n5Hs6yVo8r7stewP6tm2XscQiAeseDgmv28w s6Mtiz8uPUbrgFRb6SJk7coH2n/2Y3//S9YP NldDFv3luPnnU1TBb3jDsBKIZWHU9yl/cLNA OKUhlMDd40txk+fQi3iiV5Ls9K8= ) 86400 RRSIG DNSKEY 5 2 86400 20101009062248 ( 20100909062248 59647 test.dnssec. b5fz0dEp2co2pVO7biY896XmsJanjQIR69vC MvSF104/9iZk6eGVFi6hsa4aZcXutEjUDESB ynPkDjMWWIIhN6K1jYKGIc/sFKv1IUONRYHF KXGgZhC6aI0B1E4NA9AXLjlBVF60nHdc3iw8 5gTLDjypP3qAZrnzMvdiBopLnVdB25UZYKn8 mGpOuzKqX02TGMCFMlEVtMX4FP/XKAE8UjiQ 5ehC1JvIKIyg/2zM+ot3nmcqqtUfzp/Hweyc aIkl/9wPJPwMedfTqOjfUKFdB+GiZ0Zz16HZ 5MfJui5IGh5Y6Q04kMrnap2V5U7mByTzx/ud V/eFYhmSHGtAXzBjMA== ) a.test.dnssec. 86400 IN A 1.1.1.1 86400 RRSIG A 5 3 86400 20101009062248 ( 20100909062248 40665 test.dnssec. P52N9ypCrYsgS4CFcUmII0xjyE6KNL9ndhzH oU63fHJHQHeQV+fc0Rx8cCmZSzuqk1lSBelV 3Gcl9UNNuCAQ4ORQ/yJkiZ1zn7h93Mep9qsg YEUQJMfk4FLjYW67DHNcuoCnKbDJhZS0ndVf I474k7ZEZJsGslwk/vcIoFnTa4o= ) 172800 NSEC b.test.dnssec. A RRSIG NSEC 172800 RRSIG NSEC 5 3 172800 20101009062248 ( 20100909062248 40665 test.dnssec. TCduf7xPSrWvEAzBO7Kx5haR85yA/lbsswkQ v0QxlskqAqo+9YedGQV+wGblbCIOmkomrYcq u/rXQ5yoQ3SDXd/bw6EFdoQmH8UJOjMc7SdR xY93MjawPB6XXlJsSlbBFPWJwEpILVRhdBFX czdS5VCa1KmhAYZYQp1FY9rMelA= ) b.test.dnssec. 86400 IN A 2.2.2.2 86400 RRSIG A 5 3 86400 20101009062248 ( 20100909062248 40665 test.dnssec. f0M6Tcqe6B09ctaN3BGAit4u4cJE8x3Ik8sh gyMu0GN/lMv/Bo7PB6hgylLam3HXtF1pPAzX oYudXmhU8afPapHMXfUitC1lFQB5ZW052ZC7 JXV9MnGULydz1blj2EdN+JL3Za8SJKM0LrLB XdQ+QUV+A/6N7hUV6usz5YmdBeI= ) 172800 NSEC ns1.test.dnssec. A RRSIG NSEC 172800 RRSIG NSEC 5 3 172800 20101009062248 ( 20100909062248 40665 test.dnssec. sc6v19dcOFVa295/Xf1pKxBhbdpEErY8CTDQ fw2fjJf0Y3wL1Y1Mlr5zi5ShceQwgua+6YHE DWNbAPcXrJ0lLMU4DU5r0sAyBiBCgCavngGk i59W+nv11zuIpPMnlaMHpJVfJrQ+c4z7H9MH 77B0fMRFTUnvAXoq6ag8Q5POITI= ) ns1.test.dnssec. 86400 IN A 3.3.3.3 86400 RRSIG A 5 3 86400 20101009062248 ( 20100909062248 40665 test.dnssec. UQ3hR/++ta1GokxGz8Yh+GomMcA+xhd3z2Ke z0tdFiNfxvGbm85XyCtSqJIo2S/ZLVJUv/mG nGJbicTfJSziKzYZsD7dp0WJiUK3l7lQ/HpP 5FL8SbjlovVYYAG5woW4p3+os28mmCAJA8gP JTywbcREEhFB4cir2M/QVP+9h+Y= ) 172800 NSEC test.dnssec. A RRSIG NSEC 172800 RRSIG NSEC 5 3 172800 20101009062248 ( 20100909062248 40665 test.dnssec. i7F/ezGl/pGXCC6JyVDaxuwdZMAgv9QLxwzi PTgjCG8Sj6pTIxaQkSLwXsoB9gF77WWBANow R2SWdz0Zai2vWnv/NYoNm9ZfRJEQ9NuExeYp rvX/+lLOHvZXN6tUerIQbWAxO2GwdzHoejSn wReUNVr9MxzZUvuJ33Z7X/7s9VQ= ) Named.conf (Cache/Resolver) include "/etc/rndc.key"; controls { inet 127.0.0.1 allow { localhost; } keys { rndc-key; }; }; options{ version "Peticion no permitida/Query not allowed"; hostname "Peticion no permitida/Query not allowed"; server-id "Peticion no permitida/Query not allowed"; directory "/etc/DNS_RIMA"; pid-file "named.pid"; recursion yes; notify no; #DNSSEC dnssec-enable yes; dnssec-validation yes; listen-on {127.0.0.1; 172.23.2.87; 80.58.102.37; 80.58.102.115; }; #listen-on {127.0.0.1; 80.58.102.37; 80.58.102.115; }; allow-query { telefonica; }; allow-transfer { none; }; recursive-clients 40000; max-cache-size 838860800; rrset-order { order fixed;}; max-ncache-ttl 600; }; trusted-keys { "test.dnssec." 257 3 5 "AwEAAcd4dxWyTgOuqha0DJADUH0pk5jvnwdMZhgZaqnayUdeTh8U9WOjOUHdVCGywZS6NTVpxXqhcegWzh2ZR5VN6thuhezt7kbzLNWbPe7mYF29/ZT XB6nmdSxruQlSvYhzkWTaPNtfrUnIUlbDRxUFWQkSHj9LA1TG76FpR6uqOj1sNrWXnPb/Hwp1Sb2Ik4FlifKb/Vu1+/UnclRJgfPmp2HGTeNYpfk15JHBPSYxJ1TuedXQIdkPGlQXIS mAeV1evGomCC/x9DNleDHCszJOptwurzRPZ7wRXcWnbXz1BU8rAqvUZL3M4UgdNRR5LLTzCkRnrlvXYJpgzDtgmQxE9Bs="; }; I have configured a secure zone (test.dnssec) and I'm trying to perform some queries from the resolver to the Name server (172.23.2.57): /usr/local/bin/dig @172.23.2.57 a.test.dnssec +dnssec ; <<>> DiG 9.7.1-P2 <<>> @172.23.2.57 a.test.dnssec +dnssec ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 2654 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 2, ADDITIONAL: 3 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags: do; udp: 4096 ;; QUESTION SECTION: ;a.test.dnssec. IN A ;; ANSWER SECTION: a.test.dnssec. 86400 IN A 1.1.1.1 a.test.dnssec. 86400 IN RRSIG A 5 3 86400 20101009062248 20100909062248 40665 test.dnssec. P52N9ypCrYsgS4CFcUmII0xjyE6KNL9ndhzHoU63fHJHQHeQV+ fc0Rx8 cCmZSzuqk1lSBelV3Gcl9UNNuCAQ4ORQ/yJkiZ1zn7h93Mep9qsgYEUQ JMfk4FLjYW67DHNcuoCnKbDJhZS0ndVfI474k7ZEZJsGslwk/vcIoFnT a4o= ;; AUTHORITY SECTION: test.dnssec. 86400 IN NS ns1.test.dnssec. test.dnssec. 86400 IN RRSIG NS 5 2 86400 20101009062248 20100909062248 40665 test.dnssec. lmlP/Mb2qEXPSlajgSDn/CqWk/jokVCmqjeoidNuytxbiFnbCOunzvaY pgvDpEr0CPrwXaDLTSnb/w53tZl7GHRImJo50vwwNZljLzNT6CFwaaQX Fc3rDLsXjCi+WF0/Z7meteM4jYdx5nrVQx9pgur7VPbP88bJOqWCPBev 2Ho= ;; ADDITIONAL SECTION: ns1.test.dnssec. 86400 IN A 3.3.3.3 ns1.test.dnssec. 86400 IN RRSIG A 5 3 86400 20101009062248 20100909062248 40665 test.dnssec. UQ3hR/++ta1GokxGz8Yh+GomMcA+xhd3z2Kez0tdFiNfxvGbm85XyCtS qJIo2S/ZLVJUv/mGnGJbicTfJSziKzYZsD7dp0WJiUK3l7lQ/HpP5FL8 SbjlovVYYAG5woW4p3+os28mmCAJA8gPJTywbcREEhFB4cir2M/QVP+9 h+Y= ;; Query time: 1 msec ;; SERVER: 172.23.2.57#53(172.23.2.57) ;; WHEN: Thu Sep 9 09:47:14 2010 ;; MSG SIZE rcvd: 605 I obtain the right answer along with the RRSIG records, but the problem is that I'm not seeing the ad flag activated. Any idea about what is wrong????

  Read the article

• Getting old bluetooth headset out of standby on Windows 7

  - by luagh45

  I think this is the problem, and if not, I'm open to suggestions. I have an old Jabra BT200 that I used to use on my phone. When a phone call was coming in it would beep using its own noises (meaning the phone never rang inside the headset) and then I could push the 'answer/hang up' button and sound and mic would start working. I have now paired it with Windows 7, and it looks good. Under the playback menu I have 'Bluetooth Hands free Audio / Jabra BT200 (Mono Audio) / Ready', and under the recording menu I have 'Bluetooth Audio Input Device / Jabra BT200 (Mono Audio) / Ready'. However when I try to test the speakers Windows sends a sound, but I never hear it, and when I talk in the mic, Windows never hears me. If I right click either the Bluetooth mic or speakers there's an option to 'Connect', but it's grayed out and I cannot click it. As the final piece of knowledge I have, my headset blinks once every 3 seconds when it's in standby and I can't get that to change. If everything was working it should blink once every second at which point I think all of my problems would be fixed. Hence my issue: I can't seem to get my headset out of standby. On my headset I've tried sending it test noises and then pressing the 'Answer' button, but still nothing. The headset beeps when I press it, so it works, it just doesn't ever come out of standby. Is there maybe some way to trick my headset into thinking it's getting a phone call from my computer?

  Read the article

• Website cannot be accessed with google DNS because of unsigned DNS

  - by Sinan Samet

  I get this error: Inconsistent security for stakeholdergame.com - DS found at parent, but no DNSKEY found at child. On http://dnscheck.pingdom.com/?domain=stakeholdergame.com People can't access my site with google public DNS because of this. How do I solve this problem? dig @ns1.haveabyte.nl stakeholdergame.com DS shows me this ; <<>> DiG 9.8.3-P1 <<>> @ns1.haveabyte.nl stakeholdergame.com DS ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 42223 ;; flags: qr aa rd; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;stakeholdergame.com. IN DS ;; AUTHORITY SECTION: stakeholdergame.com. 14400 IN SOA ns1.haveabyte.nl. hostmaster.stakeholdergame.com. 2014030300 14400 3600 1209600 86400 ;; Query time: 21 msec ;; SERVER: 79.170.93.174#53(79.170.93.174) ;; WHEN: Tue Jun 10 11:20:41 2014 ;; MSG SIZE rcvd: 100

  Read the article

• Shrink a Volume Group in LVM / Linux in order to install Windows on the freed space

  - by Stephan Kristyn

  I have a Volume Group with Unused space. This 40Gig should become an entidy in order to install Microsoft windows 7 on it. I do not have extra space on the drive - that is why I want to shrink the VG! LVG berta resides on sda2 and consists of lv_root lv_swap unused_space I want it to become lv_root lv_swap and have a seperate entidy made out of unused_space. Microsoft Windows 7 has to get installed on this entidy. I do not understand why Linux made simple things complicated. I utterly hate LVM and think its absolute bollocks. Useful Sources: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-system-config-lvm.html Edit: I found the answer. The necessary steps depict how complicated LVM really is. In my opinion it is best to avoiding LVM until pvresize matures as promised in its man pages. Answer: http://fedorasolved.org/Members/zcat/shrink-lvm-for-new-partition If you run into problems when you want to remove lvswap even if in resuce mode, then try swapoff /dev/vg_1/lv_swap lvchange -an /dev/vg_1/lv_swap

  Read the article

• Mailman delivery troubles

  - by stanigator

  I'm not sure if this is a good place to ask this question. It's about mailing list management software called Mailman from GNU. Here are the details: Hosting provider: Vlexofree Domain: www.sysil.com with Google Apps Mailing List created from hosting cpanel: [email protected] I have registered a list of subscribers, and tried sending an email to [email protected]. I got the following error message: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550-5.1.1 The email account that you tried to reach does not exist. Please try 550-5.1.1 double-checking the recipient's email address for typos or 550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1 http://mail.google.com/support/bin/answer.py?answer=6596 23si6479194ewy.44 (state 14). ----- Original message ----- MIME-Version: 1.0 Received: by 10.216.90.136 with SMTP id e8mr1469147wef.110.1264220118960; Fri, 22 Jan 2010 20:15:18 -0800 (PST) Date: Fri, 22 Jan 2010 20:15:18 -0800 Message-ID: <[email protected]> Subject: From: Stanley Lee <[email protected]> To: [email protected] Content-Type: multipart/alternative; boundary=0016e6dab0931bccc3047dcd2f1e - Show quoted text - Is there any way of fixing this problem? I would like to be able to have this mailing list to work through my hosting and domain. Thanks in advance.

  Read the article

• Active Directory + IIS + SQL + ASP.NET

  - by Amira Elsayed Ismail

  I have sent the following question to stackoverflow website I have installed Windows server 2008 r2 on a virtual machine, Can I install Active directory with domain controller + IIS + SQL server on the same machine? I want to make web application and this web application will authenticate users from Active Directory, the web application should be published on the server IIS and the users should access it remotely from their home using domain name of my machine, Someone tell me that its very wrong to have IIS and Active directory on the same machine I got the following Answer You can't use ActiveDirectory over the internet. At least not without something like a VPN as a middle man. Their home computers will not be joined to the domain, so there is no pass-through authentication. Yes, it's a bad idea to put AD on the web server. Why is too complex to get into in an answer here. Suffice it to say that even if you did do this, it's probably would not work the way you are thinking it should. It's not impossible to do this. For instance, many of the Microsoft "Small Businesss" products put IIS, AD, and SQL Server on the same server. But, you kind of have to know what you're doing to configure it securely. Then I add the following comment Thanks for ur reply.so what you think about the best way to do this as I didn't do anything like that before should I install active directory on a machine and IIS on another machine ? and what about SQL should I add it to the same server of active directory ? I didn't mentioned also that it will be Microsoft dynamics server that will access some information about work and i have to read data from axapta also ? also what is VPN and how can I use it to let users access my web application anywhere ? Sorry for my long questions and thanks in advance so please if anyone can help I will be thankful

  Read the article

• How can I get VirtualBox to run at 1366x768?

  - by Joe White

  I'm trying to run Windows 8 in VirtualBox. My laptop's display is exactly 1366x768. Windows 8 disables some of its features if the resolution is less than 1366x768, so I need to run the guest OS fullscreen. The problem is, VirtualBox refuses to run the guest at 1366x768. When VirtualBox is "fullscreen", the guest is only 1360x768 -- six pixels too narrow. So there's a three-pixel black bar at the left and right sides of the display. This user had the same problem, but the accepted answer is "install the Guest Additions", which I've already done; that got me to 1360, but not to 1366. According to the VirtualBox ticket tracker, there used to be a bug where the guest's screen width would be rounded down to the nearest multiple of 8, but they claim to have fixed the bug in version 3.2.12. I'm using version 4.1.18 and seeing the same problem they claim to have fixed, so either they broke it again, they were wrong about ever having fixed it, or my problem is something else entirely. This answer suggested giving the VM 128MB of video memory, and claimed no problems getting 1366x768 afterward. When I created the VM, its display memory was already defaulted to 128 MB. I tried increasing it to 256MB, but with no effect: the guest is still six pixels too narrow. My host OS is Windows 7 64-bit, and I'm running VirtualBox 4.1.18. How can I get VirtualBox to run my guest OS fullscreen at my display's native resolution of 1366x768?

  Read the article

• asterisk extensions.conf & sip.conf

  - by Josh

  I'm trying to get my Dialplan to work. When I call, the only thing I get is a dial tone to enter extension "no Background(thanks-calling) is played". When extension 123 is dialed, busy signal is triggered and asterisk CLI get frozen. Any help will be appreciate it. Conf files below. ; PSTN on sip.conf [pstn] type=friend host=dynamic context=pstn username=pstn secret=password nat=yes canreinvite=no dtmfmode=rfc2833 qualify=yes insecure=port,invite disallow=all allow=ulaw ; PSTN on extensions.conf [pstn] exten => s,1,Answer exten => s,2,Wait,2 exten => s,4,DigitTimeout,5 exten => s,5,ResponseTimeout,10 exten => s,6,Background(thanks-calling) exten => 0,1,Goto(incoming,123,1) ; (Member Services) [incoming] exten => 123,1,NoOP(${CALLERID}) ; show the caller ID info in the console exten => 123,n,Ringing() exten => 123,n,Answer() exten => 123,n,Playback(silence/1) exten => 123,n,Playback(connecting1) exten => 123,n,Wait(3) exten => 123,n,Dial(SIP/line1,60) exten => 123,n,Congestion

  Read the article

• Paid antivirus solutions for Windows

  - by AP Erebus

  NOTE: If your looking for recommendations on free antivirus, check this question: http://superuser.com/questions/2/free-antivirus-solutions-for-windows Much like the above, I'm curious to opinions on the best PAID antivirus solution, personal or commercial. Enterprise solutions are welcome and as much detail regarding costs is welcome. Personally I'm looking for a licence that will grant me more than 1 computer install and quality technical support, for personal use. as in the free antivirus question: See if your antivirus of choice is already listed. Chances are it is. If you spot an answer that mentions one you already use, vote that up if you think it's a good solution. If you know of a feature or drawback not listed, or can include experiences in dealing with it, please edit the answer accordingly. If you know of any that can also be used at work please point this out. This covers all Windows platforms from XP, Vista and Windows 7. If you see an existing entry that needs an update or to add your testimonial, please do.

  Read the article

• Simulating audio playback on headless linux server

  - by afro

  Hi people, We have a headless linux server (Debian 5) we use for runnin integration tests of our web-page code. Among these tests are ones implemented using Selenium, which practically simulates a user browsing our pages and clicking on things. One of these tests is failing now, because it involves starting a flash-based audio player and checking to see whether the progress bar gets displayed properly. The reason this test fails is that there is no way to play the audio, and no sound card on the machine, which has simple webserver hardware. So, my question would be: Is there a simple way of giving a program the impression that its audio output is being processed, and playback is taking place? I don't have to record the playback, or redirect it or anything like that, just a dummy soundcard, like the dummy X-server we aer using, which actually does not need to display stuff. I have tried using JACK, but it's too complicated, and the documentation does not even answer this very simple question. I also installed alsa on the server; it 'pretends' to run, but when a program tries to play audio, just spews error and debug information having to do with the non-existence of a soundcard. It would be really awesome if one of you has a simple answer to this question. Cheers, Ulas

  Read the article

• Which HDD brand do you ..trust

  - by Shiki

  Okay it says its 'subjective' but I believe it's not. Basically I want to ask the community about your preference. Not really 'preference' but actual experience. Like if you never had a problem with Western Digital, then write that in an answer, or if there is one with WD, just vote it up. And so on. (Heard so many stories, experiences. I only had Samsung, Maxtor, WD, Seagate HDDs. Samsung died with bad blocks, had anomalies. Maxtor died so fast I couldn't even try it really and it's really hot, loud. Seagate is just as loud as a jet plane, and moderately hot. My WD (green) is quiet, really cool and somewhat fast. That's all I have about experiences. So I would say Western Digital in an answer (OR Hitachi. Never had one yet, but every expert I know says I should get one since they even had problems with WD but Hitachi seems to be ok. (My laptop comes with Hitachi hdd but I don't think its really relevant.)) Basically I mean desktop 7200RPM HDDs here. Well.. notebook HDDs are ok also, but no raptor/scsi/server ones. Hope you get what I meant and it won't get closed.

  Read the article

• Do any well-known CAs issue Elliptic Curve certificates?

  - by erickson

  Background I've seen that Comodo has an elliptic curve root ("COMODO ECC Certification Authority"), but I don't see mention of EC certificates on their web site. Does Certicom have intellectual property rights that prevent other issuers from offering EC certificates? Does a widely-used browser fail to support ECC? Is ECC a bad fit for traditional PKI use like web server authentication? Or is there just no demand for it? I'm interested in switching to elliptic curve because of the NSA Suite B recommendation. But it doesn't seem practical for many applications. Bounty Criteria To claim the bounty, an answer must provide a link to a page or pages at a well-known CA's website that describes the ECC certificate options they offer, prices, and how to purchase one. In this context, "well-known" means that the proper root certificate must be included by default in Firefox 3.5 and IE 8. If multiple qualifying answers are provided (one can hope!), the one with the cheapest certificate from a ubiquitous CA will win the bounty. If that doesn't eliminate any ties (still hoping!), I'll have to choose an answer at my discretion. Remember, someone always claims at least half of the bounty, so please give it a shot even if you don't have all the answers.

  Read the article

• Word 2007 won't run, tries to reinstall, fails with error 1402.

  - by eidylon

  Okay, this problem has been plaguing this computer for a while now. We tried googling, and none of the answers found helped to solve the problem. So, I am now posting the answer here for posterity. Office 2007 Home/Student edition was installed on the computer, running Vista (32-bit). One day, Word just up and stopped working. All the other programs continued to operate as expected. But every time you would click the icon for Word, it would pop up an install dialog, with a message reading "Preparing to install...". After a few minutes of the little progress bar going and going, it errors out, and gives error 1402, something to the effect of unable to access registry key HKEY_Local_Machine\Software\Classes\.wll\.... Searching around, every answer i found had to do with reassigning the permissions on this key, giving full rights to SYSTEM or to Everyone, and propagating the changes down to all sub-keys. When ever this was attempted though, it would tell us that we were unable to access the key due to permissions, even though we had run regedit as Administrator and are logged on with an administrative account. We also tried uninstalling Office and reinstalling it, as well as doing a repair install. Both these attempts also threw the same 1402 error. Also of note was that the executable for Word (winword.exe) was MIA and no longer to be found in the Office install directory.

  Read the article

• Unable to record using Jmeter: [help me very urgent]

  - by krish

  Hi, I am trying to record a http web page using Jmeter 2.3.3 version.I has setup the JMeter proxy and tried, but did n't work. I have followed the below steps. 1. Launch jmeter 2.3.3, added thred group to test plan 2. Under Workbench-add-non-test elements- added HTTP proxy server. proxy server setting are port:9090, target:use recording controller, grouping:donot group samplers, Type:HTTp request and checked the boxes of all under http sampler settings 3.Saved the settings 4. Now in browser(IE 7.0 or firefox 3.0.16), under connection settings, setup the manual proxy settings as local host and port as 9090(no auto detect settings nothing, only manual proxy). Setting saved 5.Now in the jmeter, started the http proxy server. 6. Open a browser and hit the webpage needs to be tested. The page is not opened. In fact because of the changes made in browsers, no pages are opened. Whenever i try hitting a page, the pages are recorded in the Jmeter. but without the page open, how can i test. I looking for an immediate answer and my work is blocked. Immediate answer would be appreciated.

  Read the article

• Is the APC BR700G UPS (or similar) compatible with Active PFC power supplies?

  - by David Zaslavsky

  I'm looking at getting a UPS for my home computer. So far the APC BR700G looks very promising, except for one thing: one of the reviews on Newegg says that this UPS does not work with a power supply with Active PFC. Pros: Unit looks great, built well, very heavy, was excited to use it. Cons: Didn't research enough - many newer power supplies like my corsair 750w (and yes dells and other mainstreamers sell them too) that I bought last year have a feature called active pfc (power factor corrected). The signal for this backup battery doesn't fully support that feature and can cause issues. You can find an article on APCs site if you search their user forums for PFC. And the power supply in my computer is, in fact, an Active PFC PSU. I've already found one answer on this site claiming that it's not an issue, that "most quality supplies these days have PFC and work just fine with a UPS." That disagrees with the review on Newegg. Can someone explain this discrepancy? Also, what is it exactly about a UPS that makes it incompatible with an Active PFC PSU? (if anything) Is there some way to tell based on the technical specifications, or do I just have to hunt for reviews online to avoid wasting my money? While any input would be appreciated, I would prefer to get an answer from someone with actual experience with similar UPS's and Active PFC power supplies, who can tell me whether it works or not.

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >