Search Results

Search found 21661 results on 867 pages for 'look alterno'.

Page 136/867 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• Windows XP corrupts registry every several hours

  - by Ilya Kazakevich

  There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

  Read the article

• Windows XP corrupts registry every several hours

  - by Ilya Kazakevich

  There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

  Read the article

• Concerns about Apache per-Vhost logging setup

  - by etienne

  I'm both senior developer and sysadmin in my company, so i'm trying to deal with the needs of both activities. I've set up our apache box, wich deals with 30-50 domains atm (and hopefully will grow larger) and hosts both production and development sites, with this directory structure: domains/ domains/domain.ext/ #FTPS chroot for user domain.ext domains/domain.ext/public #the DocumentRoot of http://domain.ext domains/domain.ext/logs domains/domain.ext/subdomains/sub.domain.ext domains/domain.ext/subdomains/sub.domain.ext/public #DocumentRoot of http://sub.domain.ext Each domain.ext Vhost runs with his dedicated user and group via mpm-itk, umask being 027, and the logs are stored via a piped sudo command, like this: ErrorLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_error.log" CustomLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_access.log" combined Now, i've read a lot about not letting the logs out of a very restricted directory, but the developers often need to give a quick look to a particular subdomain error log, and i don't really want to give them admin rights to look into /var/logs. Having them available into the ftp account is REALLY handy during development stages. Do you think this setup is viable and safe enough? To me it is apparently looking good, but i'm concerned about 3 security issues: -is the sudo pipe enough to deal with symlink exploits? Any catches i'm missing? -log dos: logs are in the same partition of all domains. got hundreds of gigs, but still, if one get disk-space dos'd, everything will break. Any workaround? Will a short timed logrotate suffice? -file descriptors limits: AFAIK the default limit for Apache on Ubuntu Server is currently 8192, which should be plenty enough to handle 2 log files per subdomain. Is it? Am i missing something? I hope to read some thoughts on the matter!

  Read the article

• svnsync loses revision properties although hook installed

  - by roesslerj

  Hello all! I have a pretty weird problem. We have setup an SVN-Mirror via cronjob (because it needs to go from inside to outside of a firewall, so no post-commit-hook possible) and svnsync. We installed a pre-revprop-hook just as told. Everything seems to work fine, except that it doesn't. E.g. when manually executing the script. # svnsync --non-interactive sync file://<path-to-mirror> --source-username <usr> --source-password <pwd> Committed revision 19817. Copied properties for revision 19817. No error, no complaints. But if checking for the revision properties it says: # svnlook info <path-to-mirror> 0 # svn info -r HEAD file://<path-to-mirror> 2>&1 Path: <root-of-mirror> URL: file://<path-to-mirror> Repository Root: file://<path-to-mirror> Repository UUID: <uid> Revision: 19817 Node Kind: directory Last Changed Rev: 19817 So somehow the author and timestamp information gets lost. But we need that information for our internal processes. Since no error or warning is produced I have absolutely no idea even where to start to look. Everything is local (except for the remote master), so there are no server-logs to look at. I also tried to manually recopy via svnsync copy-revprops (http://chestofbooks.com/computers/revision-control/subversion-svn/svnsync-Copy-revprops-Ref-svnsync-C-Copy-revprops.html). It says Copied properties for revision 19885. But when I query them, it's just the same. Any ideas how I could approach that problem, or even better -- how to solve it? Any ideas appreciated.

  Read the article

• OpenVPN, install a TAP adapter

  - by GolezTrol

  When I try to connect to my work VPN using OpenVPN, the connection fails with the message: All TAP-Win32 adapters on this system are currently in use. Many sources suggest to look in Control Panel\Network and Internet\Network Connections an enable the TAP adapter, but when I look there, there is none. Now I've run addtap.bat which is provided with OpenVPN, but I still don't get to see any TAP adapter, and logging in in VPN still fails. The output of addtap.bat is C:\Windows\system32>"C:\Program Files (x86)\OpenVPN\bin\tapinstall.exe" install "C:\Program Files (x86)\OpenVPN\driver\OemWin2k.inf" tap0801 Device node created. Install is complete when drivers are updated... Updating drivers for tap0801 from C:\Program Files (x86)\OpenVPN\driver\OemWin2k .inf. Drivers updated successfully. I've Run As Administrator both the setup of OpenVPN and addtap.bat. I've run deltapall.bat to remove any (maybe hidden) adapters. It said it removed three of them, after which I ran addtap.bat again to try to create another one. I also run OpenVPN itself as administrator. What's wrong? Running Windows 7 Home Premium on a HP Pavilion dv7 4050ed. It has worked before, but I recently had to reinstall my laptop, for which I used the restore disks I created when I just got it. Everything else seems to work fine. == UPDATE == The TAP adapter is found in Device Manager, but apparently it is disabled because it is incompatible with Windows 7 64bit. I've deïnstalled OpenVPNGui, downloaded a version that should be 64bit compatible, and installed that. Still no cigar. Then I found a tip to install OpenVPN (version 9) after installing OpenVPNGui, because that installs OpenVPN version 8. Now I got a v9 TAP driver in Device Manager, but it still doesn't work and shows up in device manager with an exclamation mark, and not at all in my network devices.

  Read the article

• There's no sound on Ubuntu with an Intel HDA onboard chip and Realtek ALC1200 codec.

  - by Hanno Fietz

  For a while now, my sound has not been working in Ubuntu. It used to play OK, but after some upgrade (might have been distro upgrade to 9.10), it stopped working. I'm currently running 10.04 on an amd64 architecture. I'm using the builtin audio on a Foxconn motherboard, it's an ATI / Intel HDA chip with an Azalia controller, apparently it's using the Realtek ALC1200 codec. All the gory details here. I found a nice sound troubleshooting tutorial here, which is well-written and pretty extensive, however, I fail to look up the supported "models" for my soundcard. The troubleshooting page says to look for a section giving the codec used by your soundcard, which looks like this for me: !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Realtek ALC1200 Then, I'm supposed to lookup the models for that codec in the file Documentation/ALSA-Configuration.txt in the appropriate directory of ALSA's git repository. Mine actually pointed me to a separate file, Documentation/HD-Audio-Models.txt, which, for my driver version is located here and contains no section related to ALC1200 codecs. I tried putting the driver options probe-mask=1 and model=auto in a config file for modprobe, as suggested elsewhere, but this just lead to snd-hda-intel not able to load at all anymore. I also tried installing the linux-backports-modules-alsa package for my kernel, because the description sounded promising, but that didn't change anything, either.

  Read the article

• Host spreads wrong MAC Adress of router on the WIFI

  - by JavaIsMyIsland

  Strange things are going on our network. Since yesterday a host which is actually not on our subnet spreads wrong ARP Replys on our network. To be precise, only on the WIFI. If I connect my Laptop to the cable ethernet, it gets the right MAC adress of the router. Also my Android phone and my Ubuntu system do get the right MAC Adress. So I took a look at wireshark. When I clear the ARP cache of the windows machine, the first ARP response is correct and comes from the router. But like 10 ms later another ARP response comes from another host in the WIFI. The host changes its IP Adresses from time to time and they look like they are not on our subnet. So I can not use the internet because DNS is not working anymore. Sometimes the router wins the race condition and the mac adress is set correctly in the arp cache. I first thought, this is an arp-poisoning mitm attack but it does not make sense if the packets get not routed correctly?! I restarted the router but it didn't help. I have no access to the router, else I would change the shared key to make sure there is no intruder on the wifi.

  Read the article

• How to use different scaling for every monitor?

  - by Mikael Koskinen

  One of the new features in Windows 8.1 is the new "Desktop display scaling", which allows user to configure scaling per monitor. I've been trying to get this working in preview but with no success. If I configure the scaling, it always affects all of my monitors. I have two monitors, the main one with a higher resolution and the secondary with "normal" resolution. The secondary monitor is used in portrait mode. I would like to configure the main monitor's scaling as the text is currently too small. Here's how things look at the configuration screen by default: Now if I adjust the scaling, click apply and do relogin, everything is bigger. On both of my monitors. I haven't clicked the "Let me choose one scaling level for all my displays", but still the slider seems to affect both of them. If I check the "Let me choose one scaling level", the UI changes to look similar to what we have in Windows 8: Still the problem persists. The scaling is applied to both of my monitors. So, it doesn't matter if I check the box or not, the scaling is always applied to all the displays. Any idea how I could get this to work in preview? I've read some comments which seem to indicate that this should work in preview, though Paul Thurrott mentioned at his Winsupersite article that he either didn't get this to work.

  Read the article

• Cannot install mercurial properly - PYTHONPATH error

  - by evident

  Hi, I have a server running on Ubuntu 10.04 on which I wanted to install Mercurial via % sudo apt-get install mercurial It seems to have installed successfully and doesn't show me any error messages. But when I try it I get: % hg abort: couldn't find mercurial libraries in [/usr/bin /usr/lib/python2.6 /usr/lib/python2.6/plat-linux2 /usr/lib/python2.6/lib-tk /usr/lib/python2.6/lib-old /usr/lib/python2.6/lib-dynload /usr/lib/python2.6/dist-packages /usr/lib/pymodules/python2.6 /usr/local/lib/python2.6/dist-packages] (check your install and PYTHONPATH) I've googled for a while now and found some sites with the same problem but I still have no idea on how to fix it since it nowhere really says what I need to look for or what I need to add to my PYTHONPATH... By the way, right now my PYTHONPATH seems to be empty: % echo $PYTHONPATH % This is what I get if I look into my /usr/lib/ directory for mercurial: % find /usr/lib/py* -name 'mercurial*' /usr/lib/pymodules/python2.6/mercurial /usr/lib/pymodules/python2.6/mercurial-1.4.3.egg-info /usr/lib/pyshared/python2.6/mercurial Can anybody please help me with that? What (and how) should I set my PYTHONPATH to? I already tried reinstalling, installing with "easy_install mercurial" or with "aptitude reinstall mercurial" but nothing helped. I always get this same error. Would be great if anyone could help... thanks! ADDITION: Building from scratch didn't work out well... when I am logged in as root I can use hg, but when I access with my normal user I get: % hg Traceback (most recent call last): File "/usr/local/bin/hg", line 4, in <module> import pkg_resources File "/usr/lib/python2.6/dist-packages/pkg_resources.py", line 2659, in <module> parse_requirements(__requires__), Environment() File "/usr/lib/python2.6/dist-packages/pkg_resources.py", line 546, in resolve raise DistributionNotFound(req) pkg_resources.DistributionNotFound: mercurial==1.7.2

  Read the article

• The Server Fault Wiki of recommended practices [migrated]

  - by Avery Payne

  So I've noticed that there are several recommendations on basic practices on Server Fault, but there doesn't seem to be a cohesive view as to how those recommendations would all fit together. So I thought I would lump these together as a kind of mental exercise to see what the "ServerFault Community IT Department" would look like if it were implemented. This would give a few things: it would make a reasonable wiki (in the true wiki spirit of many contributions), it would provide several links to well-vetted practices, and it would be kind of fun to see what the amalgamation would look like. And who knows, it may even point out some interesting issues between different forms of "best practices", although I would be stunned if there was a conflict hidden in there someplace... Add your favorites from Server Fault as answers, and I'll re-edit this section with the results. Here's a few catagories to collect different ideas together. Hardware Configuration(s) Server room configuration. Server room temperature Firmware Updates and Scheduling Storage Configuration(s) Selecting a NAS box Linux: Dealing with /tmp Linux: Install apps in /var or /opt? Network Configuration(s) checking DNS health and compliance Security Practice(s) Password (General) Best Practices Password sharing methods Windows Update Updating Windows Servers that are hosts for VMs Network Service(s) User Service(s) User Naming & Deletion Upgrade Process(es) Disaster Recovery Checking Backups Documenting an outage for a post-mortem review Last Edit: 2010-02-17

  Read the article

• How can I unregister a service with dns-sd?

  - by Roman

  I am trying to use "dns-sd" command line tool on my Windows 7 machine. I can already do something. For example I can register a service using "dns-sd -R ...". I also can browser (see) registered services using "dns-sd -B ...". What I still miss, is how to unregister a service. At the moment when I type "dns-sd -R ..." the dns-sd does not return me to the command prompt. To return to the command prompt I need to press Ctrl-C. And the service stays registered till I press Ctrl-C. What I want is to run "dns-sd -R ..." in the background regime and then I would like to have a possibility to unregister a service from the command line. One more thing which I do not understand yet is what "to look up a service" means. In my picture it should be sufficient to register a service, to see it and then to unregister it. But apparently I need to look up a service. What does it mean and why I need to do it?

  Read the article

• ssh without password does not work for some users

  - by joshxdr

  I have a new RHEL4 Linux box that I am using to copy data to old Solaris 2.6 and RHEL3 Linux boxes with scp. I have found that with the same setup, it works for some users but not for others. For user jane, this works fine: jane@host1$ ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/osborjo/.ssh/identity debug1: Offering public key: /mnt/home/osborjo/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 277 debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). for user jack it does not: jack@host1 ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/oper1/.ssh/identity debug1: Offering public key: /mnt/home/oper1/.ssh/id_rsa debug1: Authentications that can continue: publickey,password,keyboard-interactive I have looked at the permissions for all the keys and files, they look the same. Since I am using home directories mounted by NFS, the keys for both the remote host and the local host are in the same directory. This is how things look for jane: jane@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jane operator 394 Jan 27 16:28 authorized_keys -rw------- 1 jane operator 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jane operator 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jane operator 1205 Jan 27 16:46 known_hosts For user jack: jack@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jack engineer 394 Jan 27 16:28 authorized_keys -rw------- 1 jack engineer 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jack engineer 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jack engineer 1205 Jan 27 16:46 known_hosts As a last ditch effort, I copied the authorized_keys, id_rsa, and id_rsa.pub from jill to jack, and changed the username in authorized_keys and id_rsa.pub with vi. It still did not work. It seems there is something different between the two users but I cannot figure out what it is.

  Read the article

• Why does notepad crash on desktop files in the save-as dialog?

  - by deepc

  Here's a puzzling problem - maybe somebody has an idea. Right now I am out of ideas. On Win7 64bit, the following crashes Notepad: On Desktop, right click, select "New | Text Document". This creates "New Text Document.txt". Right click on that file, select "Edit". This opens notepad with the empty file. Select "File | Save as": Notepad crashes and Win7 reports that "Notepad has stopped working". Now, move the file to c:\temp and repeat steps 2 and 3: no crash this time and the save-as dialog appears normally. I can create similar steps for the "open" dialog. Things I have tried: Safe mode - does not work, same problem Create a new user and try again logged in as that user - no crash Name file differently, or create elsewhere and then move to desktop - same problem Use Wordpad instead - same problem Review shell extensions with ShellExView - nothing extraordinary here Stare at the event log entries for each of the crashes. Does not enlighten me. At time of crash look at the process explorer stack view. Hangs at a function "TaskDialog". sfc.exe /scannow repaired some files but the problem persists. This is how the event log entries look like: Log Name: Application Source: Application Error Date: 14.12.2010 00:33:48 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Description: Faulting application name: NOTEPAD.EXE, version: 6.1.7600.16385, time stamp: 0x4a5bc9b3 Faulting module name: COMCTL32.dll, version: 6.10.7600.16661, time stamp: 0x4c6f6e4b Exception code: 0xc000041d Fault offset: 0x00000000000db770 Faulting process id: 0x198 Faulting application start time: 0x01cb9b1e140ab92a Faulting application path: C:\Windows\system32\NOTEPAD.EXE Faulting module path: C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_fa62ad231704eab7\COMCTL32.dll What else should I try, short of dumping my user and starting over with a new profile? Thanks...

  Read the article

• How to schedule automatic (daily) snapshots of AWS EC2 Windows Instance?

  - by Stanley

  I have some Windows servers hosted on Amazon EC2. Some run Windows Server 2003 and other run Windows Server 2008. These are EBS-backed instances. Most of the instances also have some additional EBS-volumes attached. We want to schedule a daily snapshot of the windows machines (and also the attached EBS-volumes) to S3 so that we have daily backups available. One would think that this is a very common requirement and would be made available via the AWS Management Console, but alas, it is not. What approaches are available? How do I schedule daily snapshots on our Windows Servers? There are several scripting examples available online for Linux, but not so much for windows. I have had a look at http://sehmer.blogspot.com/2011/04/amazon-ec2-daily-snapshot-script-for.html as well as https://github.com/ronmichael/aws-snapshot-scheduler. Has anyone used one of these approaches and does it work? I have also considered a service like Skeddly which seems inexpensive at first glance but when you look at using it for several servers the price soon escalates to such a point where it seems a better option to create your own solution as you can then apply it to new servers in the future. With Skeddly we'll pay for each server. How do we schedule daily snapshots of our windows instances?

  Read the article

• Certain Japanese characters aren't displayed properly

  - by Nisto

  On the following site: http://www.nciku.com/search/radical the first 2 characters on the second row of the "Step 2" table aren't displayed properly. All other characters look fine. I tried re-installing the Asian fonts via the checkboxes regarding Asian fonts in the "Regional and Language Options" control panel applet. I have tried removing every single Font from the Fonts folder (some were ofcourse not possible to remove), and re-installing them all again. I did this by... Running cmd Closing down the explorer process In cmd; using the command DEL /F /S /Q * in the Fonts folder Putting in my XP SP3 Retail disc In cmd; using expand -r *.tt_ in the I386 folder on the XP disc (and any other font file, in the I386\LANG folder) I also tried installing this pack from Microsoft, but this solved nothing either. I even tried running my browser (Firefox) through AppLocale. And changing character encoding -- again, does not help. I've also tried viewing the page in Internet Explorer. What could be wrong? I have checked my Fonts folder, to make sure that every single font available on the XP disc is available in WINDOWS\Fonts. What shows in the first square on the second row - I can't really tell what it's supposed to look like (but it's not the proper character)... but the second square shows a rectangular symbol containing HEX code. I've been in this situation before -- and it has been when I've been missing fonts. But how could I possibly be missing a necessary font? Shouldn't it be provided in the Asian "font packages"? I've talked to some other users that has viewed the page, and they had no problems displaying those characters on second row - even though they're only using the fonts provided on the Windows installation disc. Windows XP Professional Service Pack 3 (x86 - with latest updates) Firefox 3.6.15

  Read the article

• Possible to IPSec VPN Tunnel Public IP Addresses?

  - by caleban

  A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

  Read the article

• Disappearing Arial on 2 Macs

  - by drewk

  I noticed that Safari started rendering common web pages in a funny manner on two different Macs that I have. One is a Macbook Pro and the other a Mac Pro desktop. Yahoo and Google would appear all excessively bold or all italic and not at all look right or acceptable. The computers are all running OS X 10.6.3 "Snow Leopard" Turns out that "Arial.TTF" and "Arial Bold.ttf" got deleted somehow on these two computers. I restored Arial through Font Book and got my web mojo back. So questions: 1) Anyone seen "arial" strangely randomly disappear? The only thing in common is these are the only two computers out of eight on site that recently got Adobe CS 5 installed. Has anyone had CS 5 delete arial? 2) When I restored arial with font book, it goes into User fonts rather than the All fonts. Can I use Font Book to restore a font in /System/Library/Fonts or do I need to do that manually? 3) I located THIS article on the web regarding OS X fonts. Essentially, Snow Leopard did away with the older .dfont format and replaced with open True Type. There is a minimum font list, but Arial is not among them. Arial is installed by MS Office. 4) Why are web sites affected by Arial being missing anyway? If I look at the HTML source for Yahoo for example, "arial" is specified by name only in an ad. Yahoo itself does not specify a font name. In my Safari preferences, I have Times and Courier specified as the default font which is the default for Safari when installed. How does a missing Arial screw things up anyway? Thanks in advance.

  Read the article

• with nginx having the base url rewrite to https

  - by jchysk

  I'd like only my base domain www.domain.com to be rewritten to https://www.domain.com By default in my https block I have it reroute to http:// if it's not ~uri = "/" (base domain) or static content. server { listen 443; set $ssltoggle 2; if ($uri ~ ^/(img|js|css|static)/) { set $ssltoggle 1; } if ($uri = '/') { set $ssltoggle 1; } if ($ssltoggle != 1) { rewrite ^(.*)$ http://$server_name$1 permanent; } } So in my http block I need to do the rewrite if it has to https: server { listen 80; if ($uri = '/') { set $ssltoggle 1; } if ($ssltoggle = 1) { rewrite ^(.*)$ https://$server_name$1 permanent; } } If I don't have the $uri = '/' if-statement in the http block, then https works fine if I go directly to it, but I won't get redirected if I go to regular http which is expected. If I do put that in-statement in the http block then everything stops working within minutes. It might work for a few requests, but will always stop within a minute or so. In browsers I just get a blank page for all requests. If I restart nginx it continues to not work until I remove both if-statement blocks in both the https and http blocks and restart nginx. When I look in the error logs I don't see anything logged. When I look in the access log I see this message: "-" 400 0 "-" "-" which I assume means a 400 error. I don't understand why this doesn't work for me. My end goal is to have the base domain be https-only while all other pages default to http. How can I achieve this?

  Read the article

• How is a subdomain passed to the webserver?

  - by Joshua Frank

  I know that dns resolves an address like example.com to an IP address like 11.22.33.44, but I'm a little confused about how subdomains are resolved, so that when you type http://subdomain.example.com, what actually gets passed to the server at 11.22.33.44? In other words, example.com = 11.22.33.44, but subdomain.example.com/path = ??? Are "subdomain" and "path" passed as http headers, or mapped in the url in some way, or what? Thanks in advance. Edit: If I'm understanding correctly, BloodPhilia says that subdomain.example.com actually is a different domain that in principle could resolve to a totally different IP. But if that's so, then what about hosts that have huge numbers of (what look like) subdomains, but which actually map to some path on the site. For instance, blogspot hosts millions of blogs, and they all look like this: aaa.blogspot.com bbb.blogspot.com ...millions more... yyy.blogspot.com zzz.blogspot.com Those are clearly not subdomains with their own IP's, but rather some mapping like aaa.blogspot.com -- www.blogspot.com/aaa, but how is this accomplished? What actually gets passed to the web server at blogspot.com?

  Read the article

• I receive email not addressed to me - virus?

  - by Anne

  Every once in a while I receive email (on Gmail) that isn't addressed to me. Gmail puts it in the spam box, because it 'can't verify that it has been sent by [sender]'. The emails, when opened, contain confidential information about deliveries and paid bills (it does look an awful lot like 'real' mail from well-known companies, and it doesn't look like a scam, since the mail is informative - they give information instead of asking for credit card numbers ;-)), and I even got an email from "Facebook" that I requested a password change and that I have to 'click here' to change the password for [email address that isn't mine]. I am not the only addressee, there seems to be a whole list of Gmail addresses beginning with 'a'. The original addressee obviously has some sort of virus, and now I wonder if this could be a risk for me too. Is my email being sent around without my knowing too? I am not the kind of person who randomly clicks on shady links - I am very careful on the internet - but maybe there are other ways of catching viruses? Is there something I should do/check? Thank you for your help!

  Read the article

• Fixed Resource Monitor Graph Scale in Windows Server 2008 R2

  - by Clever Human

  In Windows Server 2008 R2's Resource Monitor, is there a way to set the scale of the various graphs to be constant values instead of variable based on data? It seems to me that the utility of a graph is to get a quick overview glance at the values those graphs are showing. So if I look at the CPU graph and the line is up near the top, I can know immediately that something is using all my CPU and go investigate what. I don't really care if the CPU is jumping between .01% and 2%. Or if the network usage monitor is up near the top, I will know that all my bandwidth is being used up, and go figure out what. But the way things are now, the graphs are meaningless because the scales constantly shift. If you look at the network usage graph in one second it might have a scale out of 100kbps, and the next second have a scale based on 1mbps! So... is there a registry key or something that will peg the scale of these graphs to logical maximums?

  Read the article

• Apache-style multiviews with Nginx

  - by Kenn

  I'm interested in switching from Apache/mod_php to Nginx for some non-CMS sites I'm running. The sites in question are either completely static HTML files or simple PHP, but the one thing they have in common is that I'm currently using Apache's mod_negotiation to serve them up without file extensions. I'm not concerned with actual content negotiation; I'm using this just so I don't have to use file extensions in my URLs. For example, the file at /info/contact.php is accessed via a URL of just /info/contact The actual file is a .php file in that location, but I don't use the extension in the URLs. This gives me slightly shorter, cleaner URLs and also doesn't expose what's essentially a meaningless implementation detail to the user. In Apache, all this takes is enabling mod_negotiation and adding +MultiViews to the Options for the site. In Nginx I gather I'll be rewriting somehow but being new to Nginx, I'm not exactly sure how to do it. These sites are currently working fine proxied from Nginx to Apache, but I'd like to try running them solely with Nginx/fastcgi. They work fine this way as long as I'm using the extensions, so the fastcgi aspect is working great. My concern now is just with removing those extensions. It's important to keep in mind that the filename is not always in the URL, in the case of subdirectories. That is, /foo/bar should look for /foo/bar.php or /foo/bar/index.php /foo/ should look for /foo/index.php Is there a simple way to achieve this with Nginx or should I stick with proxying to Apache?

  Read the article

• Server 2003 Remote Desktop loses its virtual printer image of the local printer

  - by Charles Hart

  Server 2003 Remote Desktop provides service to stores served by several ISPs. The server loses its virtual printer image of the local printer (as seen from the remote store site) and a copy of the original local printer appears on the local computer with a different driver without notice. Specifically: A remote desktop session is opened on a local computer that has a Brother HL2140 USB printer connected and the associated software installed with a correct driver shown under the “advanced” button. The server has the same Brother software and driver. An application that is running on the server attempts to print on the local printer connected to the local computer running Vista Pro or XP Pro. Either it works correctly (Good) or it does not print (Bad) or it prints on another Local Printer connected to another local computer logged into the server (Bad and Odd). When it doesn’t print (or prints somewhere else) we ask the customer to look for the (virtual) printer using the Remote desktop view of the server and the printer is gone. Then we ask the customer to look at the printers folder in the local computer. There are several possibilities: The printer is there, but the driver is mysteriously changed in the drop down to MDX something; we have the customer select the other (proper) Brother driver, and all is well again, as now after the change, the virtual printer in the server (which now matches the local printer) appears again, and so printing can resume. A “copy” of the printer mysteriously appears in the local printer’s folder and after we delete it the virtual printer in the server appears again and so printing can resume. Note that in both case 1 and 2, the server sometimes sends the print job elsewhere, to some other local computer. Meanwhile in the log file, endless errors are reported and the server eventually crashes, sometimes twice a day. I’m puzzled what changes the local printer driver and I’m puzzled what loads the copy 2 or copy 3 of the printer in the local printer folder. This entire description randomly occurs on any of 40+ local computers in eight different locations in different ISPs, all sharing one Domain.

  Read the article

• Windows: How to make programs think they're not running in a terminal server session?

  - by sinni800

  I am using the program "SoftXPand 2011 Duo" by Miniframe on my Windows 7 PC. It makes two workstations out of one computer. It uses the terminal services built into Windows to create the additional session. I use two screens, two keyboards and two mice to create this "illusion" of two computers. It works quite well and I can even play two different 3D games on the two screens attached to this single machine (using a Radeon HD5770 and a Core i5 2500k with 8 Gbytes RAM). There are a few downsides to this. I just found about one that is hidden on the first look. The sessions you are in (even on the first workstation) will identify as a terminal server session! Now some programs will run with limited effects (graphical), and some won't run at all. This also resulted in some games not running at all. They just say "Cannot be run in a terminal server session" and exit. I have already proven that top modern games (DirectX 10, 11) run just as good as on the same machine without SoftXPand, so this is a pretty artificial limitation! So, can I somehow hack my current session so it doesn't look like a terminal server session anymore? I. E. #include <windows.h> #pragma comment(lib, "user32.lib") BOOL IsRemoteSession(void) { return GetSystemMetrics( SM_REMOTESESSION ); } Will return FALSE? (Not a programming question! Just an example how programs detect if they're in a terminal server session!)

  Read the article

• How do you recreate the System Recovery environment in Windows 7?

  - by Howiecamp

  I'm running Windows 7 Home Premium RTM (64-bit) and I want to take advantage of the system recovery tools (eg the Command Prompt) without using the Windows 7 DVD. My understanding is that this environment (WinRE) should be installed to your HDD by default as part of the Windows 7 installation. However, when I hit F8 on boot and select "Repair", I get: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. The "Info" line seems like the smoking gun. My next step was to boot from the Windows 7 DVD, and choose "Repair". It indicated my Recovery Environment wasn't on the Windows 7 boot menu (perfect) and offered to fix it. I said yes and rebooted, however same issue as above. In addition, when I booted in to Windows 7 and I looked at the boot menu options, the recovery/repair option was not there. Only my Windows installation. Finally, I ran the Disk Management tool (diskmgmt.msc) and took a look at the contents of my "System Reserved" partition (which was set to "Active" as normal). It's unclear to me what the contents should look like, however it is my understanding that the WinRE environment gets installed to this partition. (As part of the above troubleshooting I followed http://superuser.com/questions/25728/how-to-fix-windows-7-boot-process which lead to http://www.sevenforums.com/tutorials/668-system-recovery-options.html).

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >