Search Results

Search found 11240 results on 450 pages for 'partition boot sector'.

Page 136/450 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• Does a modern PC require a graphics card to run?

  - by ArtM

  As I can remember, on old systems (Pentium II or III) it was not possible to boot and run the PC if the graphics card was missing (AGP cards were used in those days). Many years from then, I'm using motherboards with integrated graphics and I have no experience related to this subject, the "graphics card" always was present. Currently I intend to build a home/private "server" for my purposes and most of the motherboards I want to buy have no integrated graphics (AMD 870 or 970). I can take a normal graphics card from my firends for a few hours/days and use it when installing the necessary software. The question is: can I boot and run the PC without problems after I install everything I need and the graphics card is removed? if a general answer cannot be given, at least some examples of manufacturers/MB series/MB models will be helpfull I think it's obvious, but for completeness: I mean cheap desktop components, not real servers.

  Read the article

• Windows XP occasionally hangs for 2-3 minutes as the splash screen fades in.

  - by marcusw

  This is a bit of a rare problem, I have not been able to debug or fix it or find anyone else with the issue. I hope someone here can help me out. Once in a while, I boot up Windows XP from the first partition of the first disk (using grub, the computer dual-boots ubuntu) and it hangs as the Windows XP splash image fades in, leaving the screen with a dim image of the splash screen. After 2-3 minutes, it continues to boot as normal, no error messages or strange behavior. I have noticed that this happens about 75% of the time when the last time the computer was shut down it was from Ubuntu, and maybe 5-10% of the time otherwise. I have looked at system logs as far as I was able, and did not find anything the miss. What is causing this and how can I fix it?

  Read the article

• Keyboard/Mouse not working when windows vista has reached login screen

  - by Jonas

  I currently have a problem with a system (vista home premium, 64bit). USB kbd/mouse will not work when windows has booted/loaded their drivers and Im stuck at the login screen with no working input devices. None of the available boot options after F8 will boot to working kbd/mouse. They work in the bios setup and they seem powered all the way until a few seconds before the login screen. Legacy USB devices is also enabled in the bios. They also work with the recovery dvd, but I am unable to start the device manager to check or uninstall the mouse/kbd drivers. Cant get devmgmt.msc nor devmgr.dll (with rundll32) to work. System repair does not detect the problem and there are no available restore points (it was disabled). Any ideas?

  Read the article

• hp g7-1070us does not post to windows

  - by lexlyn4

  Ok basically my laptop screen is broken and only a small portion of the screen is viewable. When I boot my laptop it gets to a screen where it shows startup/hp.com. That's all I can see because of the screens state. I can enter bios bit again cannot see much. My laptop is an hp g7-1070us and I was thinking of hooking it up to a monitor then going into the bios but that's not possible unless the computer posts to windows. So I don't care about the data all I want is to boot to windows. I'm wondering if I insert a copy of windows,7 and do,a,clean install will,it work. I don't have the cd yet but working on it. I need help please

  Read the article

• Why I'm unable to use up/down arrows in my BIOS?

  - by nexus

  My BIOS is loading and when I wanted to change anything, the up/down arrows aren't working. What might be the problem? I want to change boot options, but I'm unable to select the boot from CD option. My BIOS version is f2.3. Do I need to upgrade it? I need my system for 2 more months continuously and I'm afraid if there might be some problem upgrading. But anyway, what might be the cause for this behavior? For you info I have the pavilion dv6 series laptop, BIOS version: f.23 processer: Intel(R) core(TM) i3 CPU M 370 @ 2.40ghz 2.40GHZ 2.40 GHZ

  Read the article

• How to autostart service in ANY linux?

  - by user329115

  I need to install the dumbest possible service (a binary) and have it reliably run as the current user at boot (or login, whatever) at as many platforms as possible (of the aging point-of-sale type). The app monitors another archives generated by another app in the user-session. Startup alternatives considered: init.d @reboot in crontab a .desktop file in ~/.config/autostart a myriad of other solutions including .profile and .bashrc All of the above break down at some point. The problems stem from not wanting to run as root (I want the files generated to be user-accessible), and not having a way to reliably get the current user name in sudo on all platforms. Ideally not even sudo can be assumed available. Hey, I just want to run something on boot and I have "root" power to do so. Windows get the job done easily enough. This isn't rocket science, is it?

  Read the article

• No SATA drives after PSU Upgrade

  - by hauptbenutzer

  I know this sounds a lot like this but I just confirmed that my MBR is fine as well as the SSD drive in question. What happened: I upgraded my be-quiet 700w PSU to the 1000w dark power pro. When I tried booting the system and none of the drives (all SATA) were detected, resulting in the "Boot device failure" error. After that I unplugged all but the boot drive, triple checked that all cables were in fact nice and tight inside their sockets, replaced both e-SATA and power cables ; still with the same outcome. Finally I reconnected my old PSU and sure enough the PC booted without any hassle (except of course for the direful construction that is currently occupying my desk). Does anybody have any advice on how to proceed? Surely, it is possible the PSU is faulty but are there other explanations? Thanks in advance PS. if of any help: Motherboard is GIGABYTE GA-PH67A-UD3-B3 H67 LGA 1155

  Read the article

• Is it possible to have two HDD's, and both be primary?

  - by qwerty2

  Here is my configuration: C: - system/Windows XP HDD D: - empty I just added a new hard drive (D) and formatted it and made it a primary HDD. Since then Windows hasn't been able to boot. Is the computer able to have both the system and the new HDD as primary? If not, then that is why Windows isn't booting. If it IS possible, then I have no idea what the problem is. Any help or thoughts would be fantastic! thanks!

  Read the article

• Linux Kernel not upgraded (from Ubuntu 12.04 to 12.10) - can't remove old kernels and can't install new apps

  - by Tony Breyal

  Question: How do I remove old kernel images which refuse to be removed? Context: Yesterday I upgraded Ubuntu from 12.04 to 12.10. However, the linux kernel has not upgraded from 3.2 to 3.5 as I would have expected. $ uname -r 3.2.0-32-generic $ uname -a Linux tony-b 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ cat /proc/version Linux version 3.2.0-32-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 Not sure why that happened there. I wanted to install Audacity (v2.0.1-1_amd64) to edit a lecture audio file. When trying this operation through Ubuntu Software Center, it says that to install audacity, four items will need to be removed: linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic So I click "Install Anyway" but it fails with the following output: installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 259675 files and directories currently installed.) Removing linux-image-3.2.0-27-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-27-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-27-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-27-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.2.0-29-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-29-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-29-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-29-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.2.0-30-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-30-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-30-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-30-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.2.0-31-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-31-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-31-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-31-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic Error in function: Setting up grub-pc (2.00-7ubuntu11) ... /usr/sbin/grub-bios-setup: warning: Sector 32 is already in use by the program `FlexNet'; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track. Installation finished. No error reported. Generating grub.cfg ... dpkg: error processing grub-pc (--configure): subprocess installed post-installation script returned error exit status 1 It seems I need to remove the old linux images somehow. I have tried this through (1) Synaptic, (2) Ubuntu Tweak, and (3) Computer Janitor. The first two fail, whilst Computer Janitor won't even open. The output from Synaptic is: E: linux-image-3.2.0-27-generic: subprocess installed post-removal script returned error exit status 1 E: linux-image-3.2.0-29-generic: subprocess installed post-removal script returned error exit status 1 E: linux-image-3.2.0-30-generic: subprocess installed post-removal script returned error exit status 1 E: linux-image-3.2.0-31-generic: subprocess installed post-removal script returned error exit status 1 How do I remove these old images? Thank you kindly in advance for any help on this matter. P.S. Further information: $ dpkg --list | grep linux-image rH linux-image-3.2.0-27-generic 3.2.0-27.43 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP rH linux-image-3.2.0-29-generic 3.2.0-29.46 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP rH linux-image-3.2.0-30-generic 3.2.0-30.48 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP rH linux-image-3.2.0-31-generic 3.2.0-31.50 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-32-generic 3.2.0-32.51 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.5.0-17-generic 3.5.0-17.28 amd64 Linux kernel image for version 3.5.0 on 64 bit x86 SMP ii linux-image-extra-3.5.0-17-generic 3.5.0-17.28 amd64 Linux kernel image for version 3.5.0 on 64 bit x86 SMP ii linux-image-generic 3.5.0.17.19 amd64 Generic Linux kernel image But trying to remove using the command line fails too e.g.: $ sudo apt-get purge linux-image-3.2.0-27-generic Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic 0 upgraded, 0 newly installed, 4 to remove and 1 not upgraded. 5 not fully installed or removed. After this operation, 597 MB disk space will be freed. Do you want to continue [Y/n]? Y (Reading database ... 259675 files and directories currently installed.) Removing linux-image-3.2.0-27-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-27-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-27-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-27-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Removing linux-image-3.2.0-29-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-29-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-29-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-29-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Removing linux-image-3.2.0-30-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-30-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-30-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-30-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Removing linux-image-3.2.0-31-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-31-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-31-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-31-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Errors were encountered while processing: linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• GRUB2 stuck at rescue console, showing "unknown filesystem" for all partitions

  - by AndiDog

  I installed Ubuntu 12.04 on my external USB drive, where I have a 700GB NTFS partition followed by the new 6GB ext4 partition and a swap partition (all primary). The GRUB MBR is also installed to the external hard disk. Since my BIOS puts the external drive as first disk when booting, I removed my internal hard disk before installation in order to avoid ordering problems. Now when I boot from the external drive, GRUB is stuck at the rescue console with the error "unknown filesystem". grub rescue> ls (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) ls (hd0,<any of them>)/ gives me "unknown filesystem", thus also "insmod normal" GRUB doesn't seem to be able to read my Linux partition as you can see above?! How can I solve this? Additional info: bootinfoscript says (this is with the internal drive in again, but that does not make a difference): Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos2)/boot/grub on this drive. sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info:

  Read the article

• Using Partitions for a large MySQL table

  - by user293594

  An update on my attempts to implement a 505,000,000-row table on MySQL on my MacBook Pro: Following the advice given, I have partitioned my table, tr: i UNSIGNED INT NOT NULL, j UNSIGNED INT NOT NULL, A FLOAT(12,8) NOT NULL, nu BIGINT NOT NULL, KEY (nu), key (A) with a range on nu. nu ought to be a real number, but because I only have 6-d.p. accuracy and the maximum value of nu is 30000. I multiplied it by 10^8 made it a BIGINT - I gather one can't use FLOAT or DOUBLE values to PARTITION a MySQL table. Anyway, I have 15 partitions (p0: nu<25,000,000,000, p1: nu<50,000,000,000, etc.). I was thinking that this should speed up a typical to SELECT: SELECT * FROM tr WHERE nu>95000000000 AND nu<100000000000 AND A.>1. to something of the order of the same query on a table consisting of only the data in the relevant partition (<30 secs). But it's taking 30mins+ to return rows for queries within a partition and double that if the query is for rows spanning two (contiguous) partitions. I realise I could just have 15 different tables, and query them separately, but is there a way to do this 'automatically' with partitions? Has anyone got any suggestions?

  Read the article

• cPanel web servers mounting home partition to a NAS or SAN

  - by Scott

  Hello, I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

  Read the article

• How do I disable unwanted iPXE boot attempt in Libvirt/qemu-kvm?

  - by gertvdijk

  Somehow after upgrading to 12.04, my virtual machines always boot with an attempt to boot from the network first. See this: while I don't have any PXE configuration set: I've tried: to disable SPICE, by changing the emulator to /usr/bin/kvm from /usr/bin/kvm-spice by editing the XML. Ctrl+B to configure the iPXE, but it doesn't let disable this as a boot option. setting another type of NIC - not an option, I need virtio for performance reasons. However, e1000e doesn't work either. removing the NIC: works. However, I need network. Googling around. Hard. Lots of result is about failing configured PXE boots. Not a big issue, but it increases boot times by 50-100% here (booting from SSD), so it's relatively long and annoys me. How can I disable this and boot from virtual hard disk directly?

  Read the article

• cPanel web servers mounting home partition to a NAS or SAN

  - by Scott

  I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

  Read the article

• Shrink a Volume Group in LVM / Linux in order to install Windows on the freed space

  - by Stephan Kristyn

  I have a Volume Group with Unused space. This 40Gig should become an entidy in order to install Microsoft windows 7 on it. I do not have extra space on the drive - that is why I want to shrink the VG! LVG berta resides on sda2 and consists of lv_root lv_swap unused_space I want it to become lv_root lv_swap and have a seperate entidy made out of unused_space. Microsoft Windows 7 has to get installed on this entidy. I do not understand why Linux made simple things complicated. I utterly hate LVM and think its absolute bollocks. Useful Sources: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-system-config-lvm.html Edit: I found the answer. The necessary steps depict how complicated LVM really is. In my opinion it is best to avoiding LVM until pvresize matures as promised in its man pages. Answer: http://fedorasolved.org/Members/zcat/shrink-lvm-for-new-partition If you run into problems when you want to remove lvswap even if in resuce mode, then try swapoff /dev/vg_1/lv_swap lvchange -an /dev/vg_1/lv_swap

  Read the article

• How to allow writing to a mounted NFS partition

  - by Cerin

  How do you allow a specific user permission to write to an NFS partition? I've mounted an NFS share on my localhost (a Fedora install), and I can read and write as root, but I'm unable to write as the apache user, even though all the files and directories in the share on my localhost and remote host are owned by apache. For example, I've mounted it via this line in my /etc/fstab: remotehost:/data/media /data/media nfs _netdev,soft,intr,rw,bg 0 0 And both locations are owned by apache: [root@remotehost ~]# ls -la /data total 24 drwxr-xr-x. 6 root root 4096 Jan 6 2011 . dr-xr-xr-x. 28 root root 4096 Oct 31 2011 .. drwxr-xr-x 4 apache apache 4096 Jan 14 2011 media [root@localhost ~]# ls -la /data total 16 drwxr-xr-x 4 apache apache 4096 Dec 7 2011 . dr-xr-xr-x. 27 root root 4096 Jun 11 15:51 .. drwxrwxrwx 5 apache apache 4096 Jan 31 2011 media However, when I try and write as the apache user, I get a "Permission denied" error. [root@localhost ~]# sudo -u apache touch /data/media/test.txt' touch: cannot touch `/data/media/test.txt': Permission denied But of course it works fine as root. What am I doing wrong?

  Read the article

• How can I boot into Windows from GRUB rescue WITHOUT CD drive?

  - by user103968

  I took this from another website's string where i found no good answer This is my situation: installed Ubuntu without a CD (using A USB) dual boot installation (Windows 7+Ubuntu) didn't like the installation and decided to boot into Windows and delete the Linux partitions forgot to fix the mbr from within Windows Now, when I boot, I am stuck in the GRUB rescue limbo. Simple question: How can I boot into Windows from GRUB rescue? I cannot boot from CD because I don't have a CD drive, therefore the usual solutions (recovery CD etc) do not work. Any hints? Is there a way i can maybe do this through a USB? Thanks

  Read the article

• How to remove NTFS system files from a previous Vista installation

  - by Boldewyn

  I'm trying to shrink my system partition under Win Vista. It's all fine, except that in front of the last 300MB of the volume sits a single file, that cannot be moved by defrag or other means from its position. It's called C:\$Extend\$UsnJrnl:$J, and my assumtion is, that it is left from a previous installation of Vista, when I re-set up the system. Now, googling for this kind of files brings interesting results, but no solution to my problem: Files left on the disk can become ownerless in a new setup of Windows and inaccessible (even for administrators). To be able to access them again, I found the tip to use takeown to re-assign them to the Admin group (or anyone else). Works like a charm for normal files, but not for the C:\$Extend stuff. The C:\$Extend folder is a system folder of the NTFS file system, where the journal is stored (especially in a file called $UsnJrnl:$Data, whose name is surprisingly close to mine). You can delete the journal with fsutil usn /delete C:, however, this doesn't work from within the booted system (as I found out trying). Also, I'm not quite sure of the side effects. You can't move the NTFS own files with standard defrag tools. The same holds, by the way, for not accessible files. Every bit of knowledge out there is targeted to either not accessible files or the $Extend NTFS stuff, but noone addresses my problem involving both, an inaccessible system file. Question: How can I remove this file, or at least how can I move it on the disk?

  Read the article

• Master File Table Corrupt, any way to save data?

  - by domen

  hi. I've used search, but none of the results match my problem so I didn't have to ask separate question. I've Installed Windows 7 RTM recently and since then partitions located on one of my HDDs have gone "crazy". They used to "freeze" and didn't open in explorer for some time (minute or two, usually), sometimes all partitions of the drive wouldn't show until reboot and finally, one of those partitions started showing "disk structure is corrupted and unreadable" warning, it appeared in Disk Management window as RAW and chkdsk showed "mft corrupt". There were no important data on the partition and I didn't have enough time to analyze the problem at the moment, so I just reformatted it and ran antivirus scan on system. After that problem settled for some time, but yesterday the problematic HDD vanished again from the system. After reboot chkdsk identified mft of four partitions corrupt and now they are all in same conditions as the above mentioned one. But the difference is that the files stored in them are extremely important. and just for info: I upgraded from Win7 build 7077, but had some performance issues, so I reformatted system drive and installed fresh Win7 RTM on it. I've downloaded TestDisk and it shows all the partitions marked as NTFS (not RAW) and my knowledge of the program wasn't sufficient to obtain any other info from it :-) and the images that could help describe the problem (sorry, I'm not allowed to post images and more than one hyperlink): http:// img22.imageshack.us/img22/5909/chkdskz.jpg http:// img198.imageshack.us/img198/5576/computeray.jpg I'm interested, is there a way to let me restore the MFT or just access files so I can backup them before reformatting the drive. Thanks for your time. :) P.S. my reformatted drive is showing no problems, could there be a problem with windows 7 itself? I googled, but with no results.

  Read the article

• How do you dual boot Windows 7/8 seperatly with GRUB?

  - by Aaron

  I installed the beta version of Windows 8 and re-installed GRUB. When I boot my computer and select Windows 7, I get the new Windows 8 booting screen asking to boot between either Windows 7 or 8. If I choose Windows 7, my computer then restarts and I have to select Windows 7 again in order to boot into 7. But if I choose Windows 8 it boots right up. I understand I can choose which OS to boot by default, but I want my GRUB options to be the only way to choose between OS's. So my question is, how can I set this up so that when I click on Windows 7, I go there, and when I select Windows 8, I boot 8?

  Read the article

• Data recovery on working hard drive

  - by emgee

  So I have a 5 bay hot swap SATA enclosure that's connected to a Silicon Image-based SATA adapter in a computer. It's running XP Pro. There are two 1.5TB hard drives in slots 1 and 2 respectively, set up using RAID 1 using the the Silicon Image utility. There are also two 1TB drives in bays 3 and 4, also set to RAID 1 the same way. The partitions for both RAID arrays are Dynamic partitions. A few days back, there was a bare hard drive that needed some files copied off of, so it was popped it in bay 5, that bay to pass-through, and the copied data off of it. Later, I noticed that my 1.5TB drives no longer showed up in windows. In the Silicon Image utility, the drives showed up fine, no error. However, in Device Manager, it shows the RAID 1 array as uninitialized. It shows up as the right size, etc., but nothing else. There's no sign of anything wrong with either drive, so I'm not sure what happened exactly. I'm not the only one who has access to that computer, so it is possible there is something else done to it that I don't know of. There's quite a lot of data on it still, and if at all possible, I'd prefer to not send it to Ontrack. Does anyone know of software that would restore the partitions, keeping in mind that it's a Windows LDM partition? I have access to a variety of Operating Systems, so something that would work on Mac, Windows or Linux would be acceptable. The programs I usually use are not compatible with LDM.

  Read the article

• Can I recover a non-system disk deleted during 2008 R2 setup?

  - by serialhobbyist

  I've done a truly stupid thing and 'deleted' the data disk on a Server 2008 R2 box. Can I recover it? If so, how? I was rebuilding the box because a motherboard change had broken things. I've built loads of boxes and was going through the standard stuff without much concentration. I got to the disk screen which normally displays the two paritions on the drive: the recovery one and the system one. As normal, I deleted the two things I saw. It was only when two lots of unallocated space didn't merge into one that the full horror of what I'd done hit me. Yes, I've got backups... of the stuff I have space to back up. The real irony is that, earlier in the day, I'd ordered to 1 TB disks to deal with the problem. So, anyway, I'd really like to get this partition back because it'll save me a lot of time. How can I do it?

  Read the article

• Linux Server partitioning

  - by user1717735

  There's a lot of infos about this out there, but there's also a lot of contradictory infos… That's why i need some advices about it. So far, on the servers i had home for test (or even "home production") purposes i didn't really care about partitioning and i configured all in / + a swap partition, over RAID 0. Nevertheless, this pattern can't apply to production servers. I have found a good starting point here, but also it depends on what the servers will be used for… So basically, i have a server on which there will be apache, php, mysql. It will have to handle file uploads (up to 2GB) and has 2*2TB hard drive. I plan to set : / 100GB, /var 1000GB (apache files and mysql files will be here), /tmp 800GB (handles the php tmp file) /home 96GB swap 4GB All of this if of course over RAID 1. But actually, it's not a big deal if I lose data being uploaded, so would it be interesting mounting /tmp over raid 0 while maintaining the rest over raid 1? Sounds complicated…

  Read the article

• VMware Converter errors when creating Boot Camp VM

  - by Ryan Giglio

  I just got a new computer. My old computer had a Boot Camp installation of Windows 7, with VMWare running the Boot Camp installation in a virtual machine. On my new computer, I want Windows to strictly be a VM, so I downloaded the VMWare Converter software to create a virtual machine out of the Boot Camp partition. After finishing 95% of the converting process, I get a few messages Warning: Failed while updating boot.ini on the target machine's system volume. Warning: Failed while updating drive letters for the target volume layout. Error: Reconfiguration failed. And then it fails with FAILED: Unable to find the system volume, reconfiguration is not possible. I'm not sure what the problem is or how to fix it...I don't know much about virtualization or dual booting other than the simple instructions on how to set it up the first time.

  Read the article

• Timing the Linux Kernel boot-time optimisation

  - by CVS-2600Hertz-wordpress-com

  I am trying to optimise the boot-up time of linux on an embedded device (not PC) Currently to profile the boot-up sequence, I have enabled the timing info on printk logs. Is this the most optimum way? If not, how do i profile the boot-up sequence (with timing) with minimum overhead? PS: I have a terminal (of the device) over a serial-connection & I use TeraTerm over windows-XP to access it.

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >