Search Results

Search found 9015 results on 361 pages for 'wireless range'.

Page 136/361 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

  - by WerkkreW

  I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

  Read the article

• How can I redirect/forward all the UDP/TCP traffic on one interface to another interface in OpenWrt

  - by Sina Sou

  I am new to networking and I have a measurement device (D) that periodically sends all its readings over few UDP multicast sockets (with different multicast IP addresses and different port numbers). That device even listens to a TCP socket simultaneously to modify its configuration on port 7234. Since the device has just a Ethernet interface for communication and I want to make it work wireless, I decided to use a very small wireless open-wrt based router that attaches to the device (D) and redirect/forward all the network traffic(Both UDP/TCP) to the router wireless interface. In order to simplify the problem assume that the Device (D) establishes following sockets (at the same time) UM_SOCK1: UDP mcast socket on 239.1.2.3 port# 50620 UM_SOCK2: UDP mcast socket on 239.1.2.4 port# 50640 TC_SOCK3: TCP DHCP/STATIC ip address 192.168.1.200 port 7234 And (D) is connected to Open-Wrt router (R) via interface en01 (Ethernet) the router has it own wireless interface on (wlan0) I want all the traffic from interface pass through wlan01 and vice versa (bi-directional) en01 <---- wlan01 What would be the minimum iptables or ... commands that I need to make this possible? Even I am wondering if traffic directing can be made easier like if the direction is not going to be based on IP addresses(not desired if the device is connected via DHCP) I would rather redirection to be Interface(en0) based or on MAC address (The best solution since my device has unique MAC address)? Thanks

  Read the article

• CPU operating temperature ranges

  - by osij2is

  I have an AMD Phenom II 960T with 2 cores unlocked for a total of 6 cores. I don't overclock at all. I have a Arctic Cooling ACALP64 Heatsink/Fan installed. I'm currently running ESXi 5.0 so I have to go into the BIOS to read the CPU temperatures, which at idle seem to be in the 71-74C range. To me, this is pretty high, but I cannot find any official temperature ranges that AMD says the CPU can work well within. There seems to be a lot of questions on superuser and numerous forums around CPU temperatures but no one seems to have a clear consensus as to what the manufacturer temperature ranges are for specific CPUs. I've tried searching through AMDs site to no avail. At this point, I'd be willing to shut off the 2 extra cores if it keeps the heat down but until I get some sort of tolerance or range for temperature, I have no idea if the CPU is being damaged or not. Can anyone point to a direct source, article, FAQ from AMD that specifically states their CPUs temperature range? Or are CPU temperature ranges so varying that there's no possible baseline? Am I being too paranoid about this? To me, anything over 65C is a bit much and if I'm in the low-mid 70s range with NO VMs running, what can I expect if I have several VMs running?

  Read the article

• UIDs for service users in Mac OS X

  - by LaC

  Some third-party servers should be run under a special user for security reasons (eg, PostgreSQL is typically run by "postgres"). Of course, these service users should not show up in the Mac OS X login windows. I know how to create hidden users using dscl or dsimport, but I'm wondering what the best policy is for assigning UIDs (and matching GIDs). Apple's documentation states that UIDs from 0 to 100 are reserved (pg. 69), but OS X comes with several special users and groups outside that range. I used to use ids from 401 onwards for services, but I noticed that OS X 10.6 has started using that range for groups created by the Sharing pane in System Preferences. What is the recommended ID range to use for third-party services, then? Perhaps I should just use IDs in the 500 range, since all that is needed to hide a user in Snow Leopard is setting his password to "*"? Also, most of Apple's services have names starting with an underscore, with an alias sans underscore; eg, _sandbox and sandbox. Is there any special significance to this? Should I do the same for my services?

  Read the article

• How do you link a time stamp to a cell using a userform button control? [migrated]

  - by Chad Cochrane

  Hello fellow VB Developers/Users/Hobbyists/What-Have-You! I have a user form that has two buttons: 1. Start 2. Stop When I press start, I would like it to record the current time with this format: (dd/mm/yy hh:nn:ss:) in a specific column. Then when I press the Stop Button I would like it to record the time again in the cell next to it. Then if I press start Again I would like it to record below the first cells current record. Basically I am building a timer to record data to see how long certain tasks take. I will post the excel file and provide more information were necessary. Thanks for any help provided. CURRENT CODE Public runTimer As Double Public startTime As Date Dim counter As Date Sub setStart() counter = 0 startTime = Now runTimer = Now + TimeSerial(0, 0, 1) Application.OnTime runTimer, "setStart", , True Set myTime = Sheet4.Range("F1") Set timeRng = Sheet4.Range("C8:C100") i = WorksheetFunction.CountA(timeRng) i = i + 1 Cells(i, "C") = myTime Sheet4.Cells(i, "C").NumberFormat = "yyyy/mm/dd HH:mm:ss" If i >= 2 Then Cells(i, "D8") = Cells(i, "C8") - Cells(i - 1, "C8") Sheet4.Cells(i, "C").NumberFormat = "yyyy/mm/dd HH:mm:ss" End If Application.EnableEvents = False End Sub Sub setStop() Application.OnTime runTimer, "setStop", , True Set myTime = Sheet4.Range("F1") Set timeRng = Sheet4.Range("D8:D100") i = WorksheetFunction.CountA(timeRng) i = i + 1 Application.EnableEvents = False Cells(i, "D") = myTime Sheet4.Cells(i, "D").NumberFormat = "yyyy/mm/dd HH:mm:ss" End Sub

  Read the article

• Getting dwl-g122 to work on ubuntu

  - by User1

  I have a USB WiFi adapter, D-Link dwl-g122. I'm running Ubuntu 10.4. My laptop has a built-in wireless card that is connecting fine to the router. I plug in the usb and it never really connects. Here are some details: iwconfig wlan1 IEEE 802.11bg ESSID:"\x0B\xE1..." Mode:Managed Frequency:2.457 GHz Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on lshw -c network: *-network:1 description: Wireless interface physical id: 3 logical name: wlan1 serial: 00:13:46:8b:xx:xx capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg dmesg [ 1096.814176] wlan1: direct probe to AP xxx (try 1) [ 1096.820960] wlan1: direct probe responded [ 1096.820969] wlan1: authenticate with AP xxx (try 1) [ 1096.823790] wlan1: authenticated [ 1096.823869] wlan1: associate with AP xxx (try 1) [ 1096.827667] wlan1: RX AssocResp from xxx (capab=0x411 status=0 aid=1) [ 1096.827674] wlan1: associated [ 1142.590912] wlan1: deauthenticating from xxx by local choice (reason=3) lsmod|rt2 rt2500usb 19643 0 rt2x00usb 11260 1 rt2500usb rt2x00lib 32133 2 rt2500usb,rt2x00usb mac80211 238896 3 ath5k,rt2x00usb,rt2x00lib cfg80211 148725 4 ath5k,ath,rt2x00lib,mac80211 led_class 3764 3 ath5k,rt2x00lib,sdhci It looks like the driver loads but it doesn't feel like connecting. The behavior is identical even if I blacklist the other wifi card (using an ath5k driver). It's almost like it is using the wrong password or something. Does anyone know what is happening? Is anyone using Ubuntu successful?

  Read the article

• A switch and router between the printer and PC that want to print but cannot

  - by Robert Memo

  IP 192.168.1.5 has a wireless connection to a Linksys router (192.168.1.1) which then is connected to a switch. The switch is connected to a server (192.168.0.2). My printer has IP address of 192.168.0.8. Internet connection is fine on 192.168.1.5. Problem 1: IP 192.168.1.5 can not print using printer 192.168.0.8. Problem 2: IP 192.168.1.2 can not access a shared folder on the the server. The reason for connecting this way is that, the server does not release wireless signal. In order to get wireless signal the Router is connected to the switch. The server is a computer server that only has one outgoing LAN port. Plus, due to inconvinience physical locations, I do not have option to change the physical locations and the way it is connected already. I just want the labtops that only have wireless connection to communicate with the printer and the server. I have tried to change the router IP address to 192.168.0.x like the server and printer. It caused problem for the laptop. The router no longer release internet signals. The router does have IP address from the server 192.168.0.5.

  Read the article

• Prevent 'Run-time error '7' out of memory' error in Excel when using macro

  - by MasterJedi

  I keep getting this error whenever I run a macro in my excel file. Is there any way I can prevent this? My code is below. Debugging highlights the following line as the issue: ActiveSheet.Shapes.SelectAll My macro: Private Sub Save() Dim sh As Worksheet ActiveWorkbook.Sheets("Report").Copy 'Create new workbook with Sheets("Report"(2)) as only sheet. Set sh = ActiveWorkbook.Sheets(1) 'Set the new sheet to a variable. New workbook is now active workbook. sh.Name = sh.Range("B9") & "_" & Format(Date, "mmyyyy") 'Rename the new sheet to B9 value + date. With sh.UsedRange.Cells .Value = .Value 'eliminate all formulas .Validation.Delete 'remove all validation .FormatConditions.Delete 'remove all conditional formatting ActiveSheet.Buttons.Delete ActiveSheet.Shapes.SelectAll Selection.Delete lrow = Range("I" & Rows.Count).End(xlUp).Row 'select rows from bottom up to last containing data in column I Rows(lrow + 1 & ":" & Rows.Count).Delete 'delete rows with no data in column I Application.ScreenUpdating = False .Range("A410:XFD1048576").Delete Shift:=xlUp 'delete all cells outwith report range Application.ScreenUpdating = True Dim counter Dim nameCount nameCount = ActiveWorkbook.Names.Count counter = nameCount Do While counter > 0 ActiveWorkbook.Names(counter).Delete counter = counter - 1 Loop 'remove named ranges from workbook End With ActiveWorkbook.SaveAs "\\Marko\Report\" & sh.Name & ".xlsx" 'Save new workbook using same name as new sheet. ActiveWorkbook.Close False 'Close the new workbook. MsgBox ("Export complete. Choose the next ADP in cell B9 and click 'Calculate'.") 'Display message box to inform user that report has been saved. End Sub Not sure how to make this more efficient or to prevent this error.

  Read the article

• Getting Run time 1004 error in code

  - by krishna123

  I tried the code provided by vba express for combining sheet, while execution it is displaying Run Time error 1004: Application Defined or Object Defined Error: My Scenario is: I have a Excel, in that I have first sheet "Connection" and after it I have Sheet1, Sheet2 and so on. I am combining all sheets except Sheet"Conection" by saying start with sheet2. I tried following line of code to exclude "Connection" sheet: If Not Sheet.Name = "Connection" then but it did not work. Whatever the sheets I have in some of them I have large data in some cells. Here is the code which I am using: I have highlighted the line Sub CopyFromWorksheets() Dim wrk As Workbook 'Workbook object - Always good to work with object variables Dim sht As Worksheet 'Object for handling worksheets in loop Dim trg As Worksheet 'Master Worksheet Dim rng As Range 'Range object Dim colCount As Integer 'Column count in tables in the worksheets Set wrk = ActiveWorkbook 'Working in active workbook For Each sht In wrk.Worksheets If sht.Name = "Master" Then sht.Delete Exit Sub End If Next sht 'We don't want screen updating Application.ScreenUpdating = False 'trg.SaveAs "C:\temp\CPReport1.xls" 'Add new worksheet as the last worksheet Set trg = wrk.Worksheets.Add(After:=wrk.Worksheets(wrk.Worksheets.Count)) 'Rename the new worksheet trg.Name = "Master" 'Get column headers from the first worksheet 'Column count first Set sht = wrk.Worksheets(2) colCount = sht.Cells(1, 255).End(xlToLeft).Column 'Now retrieve headers, no copy&paste needed With trg.Cells(1, 1).Resize(1, colCount) .Value = sht.Cells(1, 1).Resize(1, colCount).Value 'Set font as bold .Font.Bold = True End With trg.SaveAs "C:\temp\CPReport1.xls" 'We can start loop 'Skip Sheet - Connection If Not sht.Name = "Connection" Then For Each sht In wrk.Worksheets 'If worksheet in loop is the last one, stop execution (it is Master worksheet) If sht.Index = wrk.Worksheets.Count Then Exit For End If 'Data range in worksheet - starts from second row as first rows are the header rows in all worksheets Set rng = sht.Range(sht.Cells(2, 1), sht.Cells(65536, 1).End(xlUp).Resize(, colCount)) 'Put data into the Master worksheet '----------------- Error in below line -------------------------------------------------- trg.Cells(65536, 1).End(xlUp).Offset(1).Resize(rng.Rows.Count, rng.Columns.Count).Value = rng.Value '---------------------------------------------------------------------------------------- Next sht End If 'Fit the columns in Master worksheet trg.Columns.AutoFit 'Dim dest, destyfile 'dest = "E:\Test_Merge\" 'destyfile = dest & "_" & trg.Name 'trg.SaveAs (destyfile) 'Screen updating should be activated Application.ScreenUpdating = True End Sub

  Read the article

• Private subnet for VM server host-only network

  - by Derek Pressnall

  At my current job, we distribute a product based on a Linux server with multiple VMs defined (using KVM / libvirt). We are planning to expose limited ports to the customer's network, and use iptables to direct inbound traffic to the appropriate internal VM. My question: is there a class of private subnets that I can use for the internal host-only network that is least likely to conflict with a client IP subnet? Specifically, if I choose a /24 out of any of the RFC-1918 defined private subnets (such as 192.168.x.x), there is a chance of conflicting with a customer-used range. I noticed that several current VM implementations default to 192.168.122.x -- is this due to an RFC that I'm not familiar with, and therefore this is a safe range to use (that most network admins would avoid)? Or did the various VM vendors just pick that range randomly? I guess I'm looking for an IP range that is more private than the existing private (RFC1918) addresses. The only other thought I had was to use one of the "Test Net" IP ranges reserved for documentation purposes (RFC 5737). Note, that I'm not worried about a customer's network blocking these IPs, as this is only internal to our server (packets get NATted before leaving the box). However this does seem more unorthodox than just sticking with the default 192.168.122.x/24 subnet.

  Read the article

• "Randomly" occurring errors...

  - by ClarkeyBoy

  Hi, My website has a setup whereby when the application starts a module called SiteContent is "created". This runs a clearup function which basically deletes any irrelevant data from the database, in case any has been left in there from previously run functions. The module has instances of Manager classes - namely RangeManager, CollectionManager, DesignManager. There are others but I will just use these as an example. Each Manager class contains an array of items - items may be of type Range, Collection or Design, whichever one is relevant. Data for each range is then read into an instance of Range, Collection or Design. I know this is basically duplicating data - not very efficient but its my final year project at the moment so I can always change it to use Linq or something similar later, when I am not pressured by the one month deadline. I have a form which, on clicking the Save button, saves data by calling SiteContent.RangeManager.Create(vars) or SiteContent.RangeManager.Update(Range As Range, vars) (or the equivalent for other manager classes, whichever one happens to be relevant). These functions call a stored procedure to insert or update in the relevant table. Classes Range, Collection and Design all have attributes such as Name, Description, Display and several others. When the Create or Update function is called, the Manager loops through all the other items to check if an item with the same name already exists. The Update function ensures that it does not compare the item being updated to itself. A custom exception (ItemAlreadyExistsException) is thrown if another item with the same name is found. For some weird reason, if I go into a Range, Collection or Design in edit mode, change something and try to update it, it occasionally doesnt update the item. When I say occasionally I mean every 3 - 4 page loads, sometimes more. I see absolutely no pattern in when or why it occurs. I have a try-catch statement which catches ItemAlreadyExistsException, and outputs "An item with this name already exists" when caught. Occasionally it will output this; other times it will not. Does anyone have any idea why this could happen? Maybe a mistake which someone has made and solved before? I used to have regular expressions in place that the names were compared to - I believe it was [a-zA-Z]{1, 100} (between 1 and 100 lower- or upper-case characters). For some reason the customer who I am developing the site for used to get errors saying its not in the correct format. Yet he could try the same text 5 minutes later and it would work fine. I am thinking this could well be the same problem, since both problems occur at random. Many thanks in advance. Regards, Richard Clarke Edit: After much time spent narrowing down the code, I have decided to wait till my brother, who has been a programmer for at least 8 years more than I have, to come down over Easter and get him to have a look at it. If he cant solve it then I will zip the files up and put them somewhere for people to access and have a go at. I narrowed it down literally to the minimum number of files possible, and it still occurs. It seems to be about every 10th time. Having said that, I force the manager classes to refresh every 10 page loads or 5 minutes (whichever one is sooner). I may look into this - this could be causing a problem. Basically each Manager contains an array of an object. This array is populated using data from the database. The Update function takes an instance of the item and the new values to be set for the object. If it happens to be a page load where the array is reset (ie the data is loaded freshly from the database) then the object instance with the same ID wont be the same instance as the one being passed in. This explains the fact that it throws an ItemAlreadyExistsException now and then. It all makes sense now the more I think about it. If I were to pass in the ID of the object to be altered, rather than the object itself, then it should work perfectly. I will answer the question if I solve it..

  Read the article

• Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

  - by Di

  I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

  Read the article

• Re-open Word document to previous cursor location with identical page vertical position

  - by Malcolm

  I would like to return to my previous point of edit with the page vertically positioned identical to its original vertical position. The Shift+F5 technique returns me to the previous point of edit, but the page I return to is vertically positioned on the screen in a somewhat random manner. In other words, if my cursor is 300 vertical pixels from the top of the document viewport, I would like to re-open my page so that the location of the cursor is still 300 vertical pixels from the top of my viewport. The following can be used to determine the vertical position (on the screen) of my text cursor: ActiveWindow.GetPoint pLeft, pTop, pWidth, pHeight, Selection.Range So the challenge becomes how to scroll my document in such a manner as to return my text cursor to its original vertical position (pHeight)? There is no corresponding ActiveWindow.SetPoint and ActiveWindow.ScrollIntoView scrolls a selection range into view, but offers no control over the vertical position of the selection range on the screen.

  Read the article

• Can connect to DNS addresses typed in the URL but not by IP addresses

  - by Ben

  I just changed over my modem to bridged mode, and changed my wireless router to PPPoE. My PC IP address is reserved and forwards port 80 to my computer's IP address based on my MAC address. I have a problem, however. I cannot access my local webserver by public IP address or my router 192.168.0.1 wirelessly from any other computer or iPad. I can, however, connect by this PC which is connected to the wireless router via ethernet. Via wireless, it says it cannot connect, however DNS addresses work (e.g. google.com, etc.) Any ideas?

  Read the article

• Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

  - by Di

  I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

  Read the article

• Running bridged-networking vmware player on a Linux machine with 2 interfaces

  - by Roman D

  I have got a laptop running Arch Linux with 2 interfaces: wireless (wlan0) and ethernet (eth0). I use wlan0 to access internet (static IP, networking is configured using netcfg), and I connect a second PC to the eth0. Now, whenever I start vmware player (v. 4.0.4), it chooses wlan0 to connect its bridged virtual NIC to, but I need it to connect to eth0 (I want my guest machine to be able to talk to the second physical PC on eth0). So, I disable the wlan0 interface (netcfg -d wireless) and restart vmware. Now, it connects to eth0, and everything works fine; I can ping the host PC from the virtual one, and I can ping the virtual PC from the second physical PC connected to eth0. Then, if I try to reenable the wlan0 interface (netcfg -u wireless), all of the connectivity between the host and the guest (and between the second physical PC and the guest) gets lost, until I disable wlan0 again. Can someone please give me a hint on what's going on?

  Read the article

• Can I easily use a VPN to duplicate SSH Tunneling functionality?

  - by Steve V.

  Right now, when I want to use an unsecured wireless connection with my (Linux) laptop, I secure my connection using a variation of the method provided here. However, to the best of my knowledge, the (non-jailbroken) iPad does not allow applications to tunnel traffic through local ports. However, it does seem to allow certain VPN traffic. I have never set up, or even used, a VPN before. I'm looking for confirmation that I'm not barking up the wrong tree before I invest significant effort into setting up my own VPN server. If I want to secure my wireless iPad traffic over an unsecure wireless connection, would I be on the right track by looking at a VPN?

  Read the article

• Can you reference an entire column in OpenOffice Calc (like A:A in Excel)?

  - by Andy

  I'd like to refer to an entire column, like you can in Excel by using A:A. I found a discussion on the openoffice.org forums which is a few years old, and suggests there is/was no neat way to do it. The options presented are Use A1:A65536. Use OFFSET($A$1;0;0;65536;1) as the previous range may get altered if you insert or remove rows. Use Data - Define Range... to name the column range (but which for me still just equates to $A$1:$A$1048576). These approaches seem over-complicated and still don't achieve my goal perfectly. Does anyone know of a way? Thanks, Andy

  Read the article

• Cisco IOS ACL types

  - by cjavapro

  The built in command help list displays access list types based on which range. router1(config)#access-list ? <1-99> IP standard access list <100-199> IP extended access list <1100-1199> Extended 48-bit MAC address access list <1300-1999> IP standard access list (expanded range) <200-299> Protocol type-code access list <2000-2699> IP extended access list (expanded range) <700-799> 48-bit MAC address access list dynamic-extended Extend the dynamic ACL absolute timer rate-limit Simple rate-limit specific access list router1(config)# What are each of the types? Can multiple types of ACLs be applied to a given interface?

  Read the article

• Need some help deciphering a line of assembler code, from .NET JITted code

  - by Lasse V. Karlsen

  In a C# constructor, that ends up with a call to this(...), the actual call gets translated to this: 0000003d call dword ptr ds:[199B88E8h] What is the DS register contents here? I know it's the data-segment, but is this call through a VMT-table or similar? I doubt it though, since this(...) wouldn't be a call to a virtual method, just another constructor. I ask because the value at that location seems to be bad in some way, if I hit F11, trace into (Visual Studio 2008), on that call-instruction, the program crashes with an access violation. The code is deep inside a 3rd party control library, where, though I have the source code, I don't have the assemblies compiled with enough debug information that I can trace it through C# code, only through the disassembler, and then I have to match that back to the actual code. The C# code in question is this: public AxisRangeData(AxisRange range) : this(range, range.Axis) { } Reflector shows me this IL code: .maxstack 8 L_0000: ldarg.0 L_0001: ldarg.1 L_0002: ldarg.1 L_0003: callvirt instance class DevExpress.XtraCharts.AxisBase DevExpress.XtraCharts.AxisRange::get_Axis() L_0008: call instance void DevExpress.XtraCharts.Native.AxisRangeData::.ctor(class DevExpress.XtraCharts.ChartElement, class DevExpress.XtraCharts.AxisBase) L_000d: ret It's that last call there, to the other constructor of the same class, that fails. The debugger never surfaces inside the other method, it just crashes. The disassembly for the method after JITting is this: 00000000 push ebp 00000001 mov ebp,esp 00000003 sub esp,14h 00000006 mov dword ptr [ebp-4],ecx 00000009 mov dword ptr [ebp-8],edx 0000000c cmp dword ptr ds:[18890E24h],0 00000013 je 0000001A 00000015 call 61843511 0000001a mov eax,dword ptr [ebp-4] 0000001d mov dword ptr [ebp-0Ch],eax 00000020 mov eax,dword ptr [ebp-8] 00000023 mov dword ptr [ebp-10h],eax 00000026 mov ecx,dword ptr [ebp-8] 00000029 cmp dword ptr [ecx],ecx 0000002b call dword ptr ds:[1889D0DCh] // range.Axis 00000031 mov dword ptr [ebp-14h],eax 00000034 push dword ptr [ebp-14h] 00000037 mov edx,dword ptr [ebp-10h] 0000003a mov ecx,dword ptr [ebp-0Ch] 0000003d call dword ptr ds:[199B88E8h] // this(range, range.Axis)? 00000043 nop 00000044 mov esp,ebp 00000046 pop ebp 00000047 ret Basically what I'm asking is this: What the purpose of the ds:[ADDR] indirection here? VMT-table is only for virtual isn't it? and this is constructor Could the constructor have yet to be JITted, which could mean that the call would actually call through a JIT shim? I'm afraid I'm in deep water here, so anything might and could help. Edit: Well, the problem just got worse, or better, or whatever. We are developing the .NET feature in a C# project in a Visual Studio 2008 solution, and debugging and developing through Visual Studio. However, in the end, this code will be loaded into a .NET runtime hosted by a Win32 Delphi application. In order to facilitate easy experimentation of such features, we can also configure the Visual Studio project/solution/debugger to copy the produced dll's to the Delphi app's directory, and then execute the Delphi app, through the Visual Studio debugger. Turns out, the problem goes away if I run the program outside of the debugger, but during debugging, it crops up, every time. Not sure that helps, but since the code isn't slated for production release for another 6 months or so, then it takes some of the pressure off of it for the test release that we have soon. I'll dive into the memory parts later, but probably not until over the weekend, and post a followup.

  Read the article

• Is there a way to determine which service does an outgoing connection?

  - by fluxtendu

  I'm redoing my firewall configuration with more restrictive policies and I would like to determine the provenance (and/or destination) of some outgoing connections. I have an issue because they come from svchost.exe and go to web content/application delivery providers - or similar: 5 IP in range: 82.96.58.0 - 82.96.58.255 --> Akamai Technologies akamaitechnologies.com 3 IP in range: 93.150.110.0 - 93.158.111.255 --> Akamai Technologies akamaitechnologies.com 2 IP in range: 87.248.194.0 - 87.248.223.255 --> LLNW Europe 2 llnw.net 205.234.175.175 --> CacheNetworks, Inc. cachefly.net 188.121.36.239 --> Go Daddy Netherlands B.V. secureserver.net So is it possible to know which service does a particular connection? Or what's your recommendation about the rules applied to these ones? (Comodo Firewall & Windows 7)

  Read the article

• setting up an access point from laptop to provide internet

  - by Avo

  i am trying to connect my wireless router as an access point from my laptop. the scenario is as follows: i have a wireless broadband connection at home, which i connect to using a username and a password. this username and password is unique, and can be used by one computer at a time!.. my sister and i can't have internet both at the same time! so im trying to connect my wireless router to my laptop with a physical cable so that i can provide internet via WiFi... first off, is this possible?!.. if not, what are my options? if it is possible, how do i set it up? a link to the appropriate steps would do as well, but i need it :(... thank you in advance, /av

  Read the article

• Accessing the physical IP address of a computer on my network that is no longer available

  - by floebs

  I'm trying to find out how to access the IP address of a computer (macbook pro) that I once had on my network at home. Does terminal store the 'connected' or 'linked' computer ID or IP of a networked computer anywhere that I can access after the laptop is no-longer within range? The laptop was part of my airport extreme network, its now out of range (stolen!), and I would like to know if its possible to discover the physical address of that laptop, even though I no-longer have physical access to the laptop. I have my airport extreme configured (somewhere??) to sniff out that laptop if it comes within range, and then connect to it. Where would this 'configured info' be stored on my desktop?

  Read the article

• Crossover LAN connection between Ubuntu And Windows 7 is not working

  - by brett

  my question is closely related to: How do I connect Ubuntu 10.04 and Windows 7 with an Ethernet cable? What I am after is: Windows 7-------wireless-----\ Wifi router Ubuntu 10.04----wireless-----/ Windows 7-------wireless-----\ | cross_over_cable Wifi router | Ubuntu 10.04----wireless-----/ What I did was On Windows edit system32\drivers\etc\hosts Add the following line: 192.168.253.2 my_ubuntu_computer_name_&-wired //?not sure if this is right On Ubuntu: sudo gedit /etc/hosts Add the following line: 192.168.253.1 my_pc_computer_name&-wired //?not sure if this is right and then Ubuntu 12.04 as the host Right click on the Network Manager applet, click Edit Connections... In the Wired tab, click Auto eth0, then click Edit... In the IPv4 Settings tab, change Method: to Shared to other computers. Click Apply and enter your password when it asks you. Close everything and reboot. Plug the Ethernet cable into both computers. But, I can connect to my windows network folders from ubuntu via wifi I can't connect to my ubuntu network folders from windows via wifi(in fact this bit was working before - so my wifi connection is worse) my ubuntu Auto Ethernet seems to be on From Ubuntu eth0 Link encap:Ethernet HWaddr 00:11:2f:f3:43:8d inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:2fff:fef3:438d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:172 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:27279 (27.2 KB) Interrupt:19 Base address:0xe400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1147 errors:0 dropped:0 overruns:0 frame:0 TX packets:1147 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94380 (94.3 KB) TX bytes:94380 (94.3 KB) wlan0 Link encap:Ethernet HWaddr 00:03:c9:e9:6f:bf inet addr:10.1.1.7 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::203:c9ff:fee9:6fbf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13186 errors:0 dropped:0 overruns:0 frame:0 TX packets:12187 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1598882 (1.5 MB) TX bytes:1189555 (1.1 MB) From Windows: Windows IP Configuration Ethernet adapter Bluetooth Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : BoB Link-local IPv6 Address . . . . . : fe80::ecf7:c445:3725:b9c1%12 IPv4 Address. . . . . . . . . . . : 10.1.1.4 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.1.1.1 Tunnel adapter Local Area Connection* 15: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:1423:3ae3:f5fe:fefb Link-local IPv6 Address . . . . . : fe80::1423:3ae3:f5fe:fefb%23 Default Gateway . . . . . . . . . : :: Tunnel adapter isatap.BoB: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : BoB Tunnel adapter isatap.{D0C8EBA1-335D-4620-8570-6C36E8786D72}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

  Read the article

• is it possible for a router to provide different gateway?

  - by Hao

  i have tp-link wireless router 192.168.10.188, i was can make it function as DHCP provider(range 192.168.10.100 to 192.168.10.109). the only thing that i cannot make it work as intended, is for it to provide different gateway (192.168.10.1), the computers that obtain IP from that router properly get everything(dynamic IP and dns IP), but there is no function on that router to provide different gateway, the computers always get the router's address(192.168.10.188) as gateway. is there a router that can provide different gateway other than its own address? or the question should be, is the dhcp of a router can provide different gateway other than its own address? note: i cannot make the wireless router address as 192.168.10.1, we have main router(non-wireless, address is 192.168.10.1) that is connected directly to internet

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >