Search Results

Search found 4432 results on 178 pages for 'fail'.

Page 137/178 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >

• git clone fails with "index-pack" failed?

  - by gct

  So I created a remote repo that's not bare (because I need redmine to be able to read it), and it's set to be shared with the group (so git init --shared=group). I was able to push to the remote repo and now I'm trying to clone it. If I clone it over the net I get this: remote: Counting objects: 4648, done. remote: Compressing objects: 100% (2837/2837), done. error: git-upload-pack: git-pack-objects died with error.B/s fatal: git-upload-pack: aborting due to possible repository corruption on the remote side. remote: aborting due to possible repository corruption on the remote side. fatal: early EOF fatal: index-pack failed I'm able to clone it locally without a problem, and I ran "git fsck", which only reports some dangling trees/blobs, which I understand aren't a problem. What could be causing this? I'm still able to pull from it, just not clone. I should note the remote git version is 1.5.6.5 while local is 1.6.0.4 I tried cloning my local copy of the repo, stripping out the .git folder and pushing to a new repo, then cloning the new repo and I get the same error, which leads me to believe it may be a file in the repo that's causing git-upload-pack to fail... Edit: I have a number of windows binaries in the repo, because I just built the python modules and then stuck them in there so everyone else didn't have to build them as well. If I remove the windows binaries and push to a new repo, I can clone again, perhaps that gives a clue. Trying to narrow down exactly what file is causing the problem now.

  Read the article

• Getting elements children with certain tag jQuery

  - by johnnyArt

  I'm trying to get all the input elements from a certain form from jQuery by providing only the name of the form and only knowing that those wanted fields are input elements. Let's say: <form action='#' id='formId'> <input id='name' /> <input id='surname'/> </form> How do I access them individually with jQuery? I tried something like $('#formId > input') with no success, in fact an error came back on the console "XML filter is applied to non-XML value (function (a, b) {return new (c.fn.init)(a, b);})" Maybe I have to do it with .children or something like that? I'm pretty new at jQuery and I'm not really liking the Docs. It was much friendlier in Mootools, or maybe I just need to get used to it. Oh and last but not least, I've seen it asked before but no final answer, can I create a new dom element with jQuery and work with it before inserting it (if I ever do) into de code? In mootools, we had something like var myEl = new Element(element[, properties]); and you could then refer to it in further expressions, but I fail to understand how to do that on jQuery Thanks in advance.

  Read the article

• Can PHP dissect its own syntax?

  - by Nathan Long

  Can PHP dissect its own syntax? For example, I'd like to write a function that takes in an input like $object->attribute and says to itself: OK, he's giving me $foo->bar, which means he must think that $foo is an object that has a property called bar. Before I try accessing bar and potentially get a 'Trying to get property of non-object' error, let me check whether $foo is even an object. The end goal is to echo a value if it is set, and fail silently if not. I want to avoid repetition like this: <input value="<? if(is_object($foo) && is_set($foo->bar)){ echo $foo->bar; }?> "/> ...and to avoid writing a function that does the above, but has to have the object and attribute passed in separately, like this: <input value="<? echoAttribute($foo,'bar') ?>" /> ...but to instead write something which: preserves the object-attribute syntax is flexible: can also handle array keys or regular variables Like this: <input value="<? echoIfSet($foo->bar); ?> /> <input value="<? echoIfSet($baz['buzz']); ?> /> <input value="<? echoIfSet($moo); ?> /> But this all depends on PHP being able to tell me "what kind of thing am I asking for when I say $object->attribute or $array[$key]", so that my function can handle each according to its own type. Is this possible?

  Read the article

• Deleting objects with FK constraints in Spring/Hibernate

  - by maxdj

  This seems like such a simple scenario to me, yet I cannot for the life of my find a solution online or in print. I have several objects like so (trimmed down): @Entity public class Group extends BaseObject implements Identifiable<Long> { private Long id; private String name; private Set<HiringManager> managers = new HashSet<HiringManager>(); private List<JobOpening> jobs; @ManyToMany(fetch=FetchType.EAGER) @JoinTable( name="group_hiringManager", joinColumns=@JoinColumn(name="group_id"), inverseJoinColumns=@JoinColumn(name="hiringManager_id") ) public Set<HiringManager> getManagers() { return managers; } @OneToMany(mappedBy="group", fetch=FetchType.EAGER) public List<JobOpening> getJobs() { return jobs; } } @Entity public class JobOpening extends BaseObject implements Identifiable<Long> { private Long id; private String name; private Group group; @ManyToOne @JoinColumn(name="group_id", updatable=false, nullable=true) public Group getGroup() { return group; } } @Entity public class HiringManager extends User { @ManyToMany(mappedBy="managers", fetch=FetchType.EAGER) public Set<Group> getGroups() { return groups; } } Say I want to delete a Group object. Now there are dependencies on it in the JobOpening table and in the group_hiringManager table, which cause the delete function to fail. I don't want to cascade the delete, because the managers have other groups, and the jobopenings can be groupless. I have tried overriding the remove() function of my GroupManager to remove the dependencies, but it seems like no matter what I do they persist, and the delete fails! What is the right way to remove this object?

  Read the article

• WebRequest using SSL

  - by pm_2

  I have the following code to retrieve a file using FTP (which works fine). FtpWebRequest request = (FtpWebRequest)WebRequest.Create(svrPath); request.KeepAlive = true; request.UsePassive = true; request.UseBinary = true; request.Method = WebRequestMethods.Ftp.DownloadFile; request.Credentials = new NetworkCredential(uname, passw); using (FtpWebResponse response = (FtpWebResponse)request.GetResponse()) using (Stream responseStream = response.GetResponseStream()) using (StreamReader reader = new StreamReader(responseStream)) using (StreamWriter destination = new StreamWriter(destinationFile)) { destination.Write(reader.ReadToEnd()); destination.Flush(); } However, when I try to do this using SSL, I am unable to access the file, as follows: FtpWebRequest request = (FtpWebRequest)WebRequest.Create(svrPath); request.KeepAlive = true; request.UsePassive = true; request.UseBinary = true; // The following line causes the download to fail request.EnableSsl = true; request.Method = WebRequestMethods.Ftp.DownloadFile; request.Credentials = new NetworkCredential(uname, passw); using (FtpWebResponse response = (FtpWebResponse)request.GetResponse()) using (Stream responseStream = response.GetResponseStream()) using (StreamReader reader = new StreamReader(responseStream)) using (StreamWriter destination = new StreamWriter(destinationFile)) { destination.Write(reader.ReadToEnd()); destination.Flush(); } Can anyone tell me why the latter would not work?

  Read the article

• git clone fails with "index-pack" failed?

  - by gct

  So I created a remote repo that's not bare (because I need redmine to be able to read it), and it's set to be shared with the group (so git init --shared=group). I was able to push to the remote repo and now I'm trying to clone it. If I clone it over the net I get this: remote: Counting objects: 4648, done. remote: Compressing objects: 100% (2837/2837), done. error: git-upload-pack: git-pack-objects died with error.B/s fatal: git-upload-pack: aborting due to possible repository corruption on the remote side. remote: aborting due to possible repository corruption on the remote side. fatal: early EOF fatal: index-pack failed I'm able to clone it locally without a problem, and I ran "git fsck", which only reports some dangling trees/blobs, which I understand aren't a problem. What could be causing this? I'm still able to pull from it, just not clone. I should note the remote git version is 1.5.6.5 while local is 1.6.0.4 I tried cloning my local copy of the repo, stripping out the .git folder and pushing to a new repo, then cloning the new repo and I get the same error, which leads me to believe it may be a file in the repo that's causing git-upload-pack to fail... Edit: I have a number of windows binaries in the repo, because I just built the python modules and then stuck them in there so everyone else didn't have to build them as well. If I remove the windows binaries and push to a new repo, I can clone again, perhaps that gives a clue. Trying to narrow down exactly what file is causing the problem now.

  Read the article

• jQuery ajax call failing with undefined error

  - by Groo

  My jQuery ajax call is failing with an undefined error. My js code looks like this: $.ajax({ type: "POST", url: "Data/RealTime.ashx", data: "{}", contentType: "application/json; charset=utf-8", dataType: "json", timeout: 15000, dataFilter: function(data, type) { alert("RAW DATA: " + data + ", TYPE: "+ type); return data; }, error: function(xhr, textStatus, errorThrown) { alert("FAIL: " + xhr + " " + textStatus + " " + errorThrown); }, success: function(data) { alert("SUCCESS"); } }); My ajax source is a generic ASP.NET handler: [WebService(Namespace = "http://my.website.com")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] public class RealTime : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "application/json"; context.Response.Write("{ data: [1,2,3] }"); context.Response.End(); } public bool IsReusable { get { return false; } } } Now, if I return an empty object ("{ }") in my handler, the call will succeed. But when I return any other JSON object, the call fails. The dataFilter handler shows that I am receiving a correct object. Firebug shows the response as expected, and the JSON tab shows that the object is parsed correctly. So what could be the cause?

  Read the article

• Side by side madness - running binaries on different computer (with a twist)

  - by sbk

  Here's my configuration: Computer A - Windows 7, MS Visual Studio 2005 patched for Win7 compatibility (8.0.50727.867) Computer B - Windows XP SP2, MS Visual Studio 2005 installed (8.0.50727.42) My project has some external dependencies (prebuilt DLLs - either build on A or downloaded from the Internet), a couple of DLLs built from sources and one executable. I am mostly developing on A and all is fine there. At some point I try to build my project on computer B, copying the prebuilt DLLs to the output folder. Everything builds fine, but trying to start my application I get The application failed to initialize properly (0xc0150002).... The event log contains two of those: Dependent Assembly Microsoft.VC80.CRT could not be found and Last Error was The referenced assembly is not installed on your system. plus the slightly more amusing Generate Activation Context failed for some.dll. Reference error message: The operation completed successfully. At this point I'm trying my Google-Fu, but in vain - virtually all hits are about running binaries on machines without Visual Studio installed. In my case, however, the executables fail to run on the computer they are built. Next step was to try dependency walker and it baffled me even more - my DLLs built from sources on the same box cannot find MSVCR80.DLL and MSVCP80.DLL, however the executable seems to be alright in respect to those two DLLs i.e. when I open the executable with dependency walker it shows that the MSVC?80.DLLs can be found, but when I open one of my DLLs it says they cannot. That's where I am completely out of ideas what to do so I'm asking you, dear stackoverflow :) I admit I'm a bit blurry on the whole side-by-side thing, so general reading on the topic will also be appreciated.

  Read the article

• Template Sort In C++

  - by wdow88

  Hey all, I'm trying to write a sort function but am having trouble figuring out how to initialize a value, and making this function work as a generic template. The sort works by: Find a pair =(ii,jj)= with a minimum value = ii+jj = such at A[ii]A[jj] If such a pair exists, then swap A[ii] and A[jj] else break; The function I have written is as follows: template <typename T> void sort(T *A, int size) { T min =453; T temp=0; bool swapper = true; while(swapper) { swapper = false; int index1 = 0, index2 = 0; for (int ii = 0; ii < size-1; ii++){ for (int jj = ii + 1; jj < size; jj++){ if((min >= (A[ii]+A[jj])) && (A[ii] > A[jj])){ min = (A[ii]+A[jj]); index1 = ii; index2 = jj; swapper = true; } } } if (!swapper) return; else { temp = A[index1]; A[index1] = A[index2]; A[index2] = temp; sort(A,size); } } } This function will successfully sort an array of integers, but not an array of chars. I do not know how to properly initialize the min value for the start of the comparison. I tried initializing the value by simply adding the first two elements of the array together (min = A[0] + A[1]), but it looks to me like for this algorithm it will fail. I know this is sort of a strange type of sort, but it is practice for a test, so thanks for any input.

  Read the article

• How do I correctly detect presence of FLTK using SCONS?

  - by James Morris

  I'm trying to build an application I've downloaded which uses the SCONS "make replacement" and the Fast Light Tool Kit Gui. The SConstruct code to detect the presence of fltk is: guienv = Environment(CPPFLAGS = '') guiconf = Configure(guienv) if not guiconf.CheckLibWithHeader('lo', 'lo/lo.h','c'): print 'Did not find liblo for OSC, exiting!' Exit(1) if not guiconf.CheckLibWithHeader('fltk', 'FL/Fl.H','c++'): print 'Did not find FLTK for the gui, exiting!' Exit(1) Unfortunately, on my (Gentoo Linux) system, and many others (Linux distributions) this can be quite troublesome if the package manager allows the simultaneous install of FLTK-1 and FLTK-2. Being Idealistic, I attempted to modify the SConstruct file to use fltk-config --cflags and fltk-config --ldflags (or fltk-config --libs might be better than ldflags) by adding them like so: guienv.Append(CPPPATH = os.popen('fltk-config --cflags').read()) guienv.Append(LIBPATH = os.popen('fltk-config --ldflags').read()) But this causes the test for liblo to fail! Looking in config.log shows how it failed: scons: Configure: Checking for C library lo... gcc -o .sconf_temp/conftest_4.o -c "-I/usr/include/fltk-1.1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_THREAD_SAFE -D_REENTRANT" gcc: no input files scons: Configure: no How should this really be done?

  Read the article

• I need some help cropping an image in PHP (GD)

  - by evan

  http://i.imgur.com/foT9u.jpg Using that image as an example, here's what I need to do: Crop the blue square to have the same proportional ratio as that of the black square From doing that, I should then be able to resize the blue square to fit into the black square without losing stretching it - It'll retain its proportions. Note: The blue square must be cropped 'from the center'. The original center should remain the center after the crop (it can't be cropped from the top left, for example). Here's what I'm thinking needs to be done (using the, landscape, blue square as the example): Figure out the difference between the black squares width and height Figure out the difference between the blue squares width and height This should tell me how much to crop the blue square by and with how much of a 'top offset' Once it's cropped to fit the black squares proportions, it can then be resized I've been messing around with code similar to: if (BLACK_WIDTH > BLACK_HEIGHT) { $diffHeight = BLACK_WIDTH - BLACK_HEIGHT; $newHeight = $blue_Height - $blue_Height; echo $newHeight; } And using Photoshop to try and get a feel for how this should be done, but it continues to fail .< How should I go about doing this? How can I figure out how much to crop by (depending on if the blue square is landscape or portrait)? How do I then get the offset to retain the blue squares center?

  Read the article

• Auto-resolving a hostname in WCF Metadata Publishing

  - by Mike C

  I am running a self-hosted WCF service. In the service configuration, I am using localhost in my BaseAddresses that I hook my endpoints to. When trying to connect to an endpoint using the WCF test client, I have no problem connecting to the endpoint and getting the metadata using the machine's name. The problem that I run into is that the client that is generated from metadata uses localhost in the endpoint URLs it wants to connect to. I'm assuming that this is because localhost is the endpoint URL published by metadata. As a result, any calls to the methods on the service will fail since localhost on the calling machine isn't running the service. What I would like to figure out is if it is possible for the service metadata to publish the proper URL to a client depending on the client who is calling it. For example, if I was requesting the service metadata from a machine on the same network as the server the endpoint should be net.tcp://MYSERVER:1234/MyEndpoint. If I was requesting it from a machine outside the network, the URL should be net.tcp://MYSERVER.mydomain.com:1234/MyEndpoint. And obviously if the client was on the same machine, THEN the URL could be net.tcp://localhost:1234/MyEndpoint. Is this just a flaw in the default IMetadataExchange contract? Is there some reason the metadata needs to publish the information in a non-contextual way? Is there another way I should be configuring my BaseAddresses in order to get the functionality I want? Thanks, Mike

  Read the article

• Winsock tcp/ip Socket listening but connection refused, race condition?

  - by Wayne

  Hello folks. This involves two automated unit tests which each start up a tcp/ip server that creates a non-blocking socket then bind()s and listen()s in a loop on select() for a client that connects and downloads some data. The catch is that they work perfectly when run separately but when run as a test suite, the second test client will fail to connect with WSACONNREFUSED... UNLESS there is a Thread.Sleep() of several seconds between them??!!! Interestingly, there is retry loop every 1 second for connecting after any failure. So the second test loops for a while until timeout after 10 minutes. During that time, netstat -na shows the correct port number is in the LISTEN state for the server socket. So if it is in the listen state? Why won't it accept the connection? In the code, there are log messages that show the select NEVER even gets a socket ready to read (which means ready to accept a connection when it applies to a listening socket). Obviously the problem must be related to some race condition between finishing one test which means close() and shutdown() on each end of the socket, and the start up of the next. This wouldn't be so bad if the retry logic allowed it to connect eventually after a couple of seconds. However it seems to get "gummed up" and won't even retry. However, for some strange reason the listening socket SAYS it's in the LISTEN state even through keeps refusing connections. So that means it's the Windoze O/S which is actually catching the SYN packet and returning a RST packet (which means "Connection Refused"). The only other time I ever saw this error was when the code had a problem that caused hundreds of sockets to get stuck in TIME_WAIT state. But that's not the case here. netstat shows only about a dozen sockets with only 1 or 2 in TIME_WAIT at any given moment. Please help.

  Read the article

• How to Avoid PHP Object Nesting/Creation Limit?

  - by Will Shaver

  I've got a handmade ORM in PHP that seems to be bumping up against an object limit and causing php to crash. Here's a simple script that will cause crashes: <? class Bob { protected $parent; public function Bob($parent) { $this->parent = $parent; } public function __toString() { if($this->parent) return (string) "x " . $this->parent; return "top"; } } $bobs = array(); for($i = 1; $i < 40000; $i++) { $bobs[] = new Bob($bobs[$1 -1]); } ?> Even running this from the command line will cause issues. Some boxes take more than 40,000 objects. I've tried it on Linux/Appache (fail) but my app runs on IIS/FastCGI. On FastCGI this causes the famous "The FastCGI process exited unexpectedly" error. Obviously 20k objects is a bit high, but it crashes with far fewer objects if they have data and nested complexity. Fast CGI isn't the issue - I've tried running it from the command line. I've tried setting the memory to something really high - 6,000MB and to something really low - 24MB. If I set it low enough I'll get the "allocated memory size xxx bytes exhausted" error. I'm thinking that it has to do with the number of functions that are called - some kind of nesting prevention. I didn't think that my ORM's nesting was that complicated but perhaps it is. I've got some pretty clear cases where if I load just ONE more object it dies, but loads in under 3 seconds if it works.

  Read the article

• Simulating mouse clicks on Mac OS X does not work for some applications.

  - by Thomi

  I'm writing an application for Mac OS X 10.6 and later in C++. One part of the application needs to simulate mouse movement and mouse clicks. I do this currently by posting CGEvent objects using CGEventPost(kCGHIDEventTap, event);. This works, for the most part - I can simulate mouse movement and clicks just fine, but it seems to fail in some areas. For example: In Mozilla Firefox and Safari, I can click on all the menus, but cannot click on a link within a website. When I try, the link is highlighted, but the browser never follows the link. However, I can right-click on a link, select "open link in new tab", and everything works as expected. Solved - creating the mouse event using CGEventCreateMouseEvent(...) makes the event work within web browser. I can click on the "Dashboard" icon to brink up the dashboard, but I cannot click on the "i" button on any of the dashboard widgets. Similarly, clicking on any of the search results from the spotlight search widget doesn't work either. This inconsistency is along application boundaries. What might be the cause?

  Read the article

• PHP import functions

  - by ninuhadida

  Hi, I'm trying to find the best pragmatic approach to import functions on the fly... let me explain. Say I have a directory called functions which has these files: array_select.func.php stat_mediam.func.php stat_mean.func.php ..... I would like to: load each individual file (which has a function defined inside) and use it just like an internal php function.. such as array_pop(), array_shift(), etc. Once I stumbled on a tutorial (which I can't find again now) that compiled user defined functions as part of a PHP installation.. Although that's not a very good solution because on shared/reseller hosting you can't recompile the PHP installation. I don't want to have conflicts with future versions of PHP / other extensions, i.e. if a function named X by me, is suddenly part of the internal php functions (even though it might not have the same functionality per se) I don't want PHP to throw a fatal error because of this and fail miserably. So the best method that I can think of is to check if a function is defined, using function_exists(), if so throw a notice so that it's easy to track in the log files, otherwise define the function. However that will probably translate to having a lot of include/require statement in other files where I need such a function, which I don't really like. Or possibly, read the directory and loop over each *.func.php file and include_once. Though I find this a bit ugly. The question is, have you ever stumbled upon some source code which handled such a case? How was it implemented? Did you ever do something similar? I need as much ideas as possible! :)

  Read the article

• handling large arrays with array_diff

  - by bigmac

  I have been trying to compare two arrays. Using array_intersect presents no problems. When using array_diff and arrays with ~5,000 values, it works. When I get to ~10,000 values, the script dies when I get to array_diff. Turning on error_reporting did not produce anything. I tried creating my own array_diff function: function manual_array_diff($arraya, $arrayb) { foreach ($arraya as $keya => $valuea) { if (in_array($valuea, $arrayb)) { unset($arraya[$keya]); } } return $arraya; } source: http://stackoverflow.com/questions/2479963/how-does-array-diff-work I would expect it to be less efficient that than the official array_diff, but it can handle arrays of ~10,000. Unfortunately, both array_diffs fail when I get to ~15,000. I tried the same code on a different machine and it runs fine, so it's not an issue with the code or PHP. There must be some limit set somewhere on that particular server. Any idea how I can get around that limit or alter it or just find out what it is?

  Read the article

• Has any one used client_side_validations gem with Chosen.js dropdown?

  - by Abid

  I am using chosen.js (http://harvesthq.github.com/chosen/). I was wondering if anyone has been able to use chosen select boxes and client_side_validations together. The issue is that when we use chosen it hides the original select element and renders its own dropdown instead, and when we focus out the validation isn't called and also when the validation message is shown it is shown with the original select element so positioning of the error isnt also correct. What could be a good way to handle this, My be we can change some code inside ActionView::Base.field_error_proc which currently looks something like ActionView::Base.field_error_proc = Proc.new do |html_tag, instance| unless html_tag =~ /^<label/ %{<div class="field_with_errors">#{html_tag}<label for="#{instance.send(:tag_id)}" class="message">#{instance.error_message.first}</label></div>}.html_safe else %{<div class="field_with_errors">#{html_tag}</div>}.html_safe end end Any ideas ? Edit 1: I have the following solution that is working for me now. applied a class "chzn-dropdown" to all my selects that were being displayed by chosen used the following callback provided by client_side_validations Gem clientSideValidations.callbacks.element.fail = function(element, message, callback) { if (element.data('valid') !== false) { if(element.hasClass('dropdown')){ chzn_element = $('#'+element.attr('id')+'_chzn'); console.log(chzn_element); chzn_element.append(""+message+""); } else{ callback(); } } } Thanks

  Read the article

• x86_64 assembler: only one call per subroutine?

  - by zneak

  Hello everyone, I decided yesterday to start doing assembler. Most of it is okay (well, as okay as assembler can be), but I'm getting some problems with gas. It seems that I can call functions only once. After that, any subsequent call opcode with the same function name will fail. I must be doing something terribly wrong, though I can't see what. Take this small C function for instance: void path_free(path_t path) { if (path == NULL) return; free(((point_list_t*)path)->points); free(path); } I "translated" it to assembler like that: .globl _path_free _path_free: push rbp mov rbp, rsp cmp rdi, 0 jz byebye push rdi mov rdi, qword ptr [rdi] call _free pop rdi sub rsp, 8 call _free byebye: leave ret This triggers the following error for the second call _free: suffix or operands invalid for ``call''. And if I change it to something else, like free2, everything works (until link time, that is). Assembler code gcc -S gave me looks very similar to what I've done (except it's in AT&T syntax), so I'm kind of lost. I'm doing this on Mac OS X under the x86_64 architecture.

  Read the article

• I am confused -- Will this code always work?

  - by Shekhar

  Hello, I have written this piece of code public class Test{ public static void main(String[] args) { List<Integer> list = new ArrayList<Integer>(); for(int i = 1;i<= 4;i++){ new Thread(new TestTask(i, list)).start(); } while(list.size() != 4){ // this while loop required so that all threads complete their work } System.out.println("List "+list); } } class TestTask implements Runnable{ private int sequence; private List<Integer> list; public TestTask(int sequence, List<Integer> list) { this.sequence = sequence; this.list = list; } @Override public void run() { list.add(sequence); } } This code works and prints all the four elements of list on my machine. My question is that will this code always work. I think there might be a issue in this code when two/or more threads add element to this list at the same point. In that case it while loop will never end and code will fail. Can anybody suggest a better way to do this? I am not very good at multithreading and don't know which concurrent collection i can use? Thanks Shekhar

  Read the article

• problem writing xml to file with .net mvc - timeout?

  - by Mark

  Hey, so having an issue with writing out to an xml file. Works fine for single requests via the browser, but when I use something like Charles to perform 5-10 repeated requests concurrently several of them will fail. The trace simply shows a 500 error with no content inside, basically I think they start timing out waiting for write access or something... This method is inside my repository class, have also attempted to have repository instance as a singleton but doesn't appear to make any difference.. Any help would be much appreciated. Cheers public void Add(Request request) { try { XDocument requests; XmlReader xmlReader; using (xmlReader = XmlReader.Create(_requestsFilePath)) { requests = XDocument.Load(xmlReader); XElement xmlRequest = new XElement("request", new XElement("code", request.code), new XElement("date", request.date), new XElement("email", new XCData(request.email)), new XElement("name", new XCData(request.name)), new XElement("recieveOffers", request.recieveOffers) ); requests.Root.Element("requests").Add(xmlRequest); xmlReader.Close(); } requests.Save(_requestsFilePath); } catch (Exception ex) { HttpContext.Current.Trace.Warn("Error writing to file: "+ex); } }

  Read the article

• Problem saving file on Motorola Droid, Android 2.1?

  - by Rob Kent

  Two of my users have reported a problem with my Android application, OftSeen Gestures. Both of them are using a Motorola Droid. The app saves a text file which is just a list of gesture names and phone numbers, both strings. It saves the file to the private data area. I don't know that it is this code that is failing but they report the assigned numbers disappearing after the phone comes out of screen sleep. Since the file is reread in OnCreate each time, I'm assuming the file doesn't exist on return. As soon as I can get my hands on a Droid I will debug it but in the meantime can you see a reason why this save operation would fail on Droid (no other users have reported this)? OutputStreamWriter out = new OutputStreamWriter(AppGlobal.getContext().openFileOutput(MAPPINGS_FILE_NAME, 0)); for (String key : mMap.keySet()) { String number = mMap.get(key).number; out.write(String.format("%s,%s\n", key, number == null ? "" : number)); } out.close(); AppGlobal.getContext returns the application context and the MAPPINGS_FILE_NAME resolves to "gesture_mappings.txt". Like I say, I don't know that this is the problem. It could be something else to do with state management inside the app. If anyone has a Droid, maybe they could download the app from Market and test it for me? Note this is a genuine request for help - not an attempt to increase my downloads.

  Read the article

• Entity Framework. Updating EntityCollection using disconnected objects via navigation property.

  - by yougotiger

  I have a question, much liket this unanswered one. I'm trying to work with the entity framework, and having a tough time getting my foreign tables to update. I have something basically like this in the DB: Incident (table): -ID -other fields Responses (table): -FK:Incident.ID -other fields And and entities that match: Incident (entity) -ID -Other fields -Responses (EntityCollection of Responses via navigation property) Each Incident can have 0 or more responses. In my Webpage, I have a form to allow the user to enter all the details of an Incident, including a list of responses. I can add everything to the database when a new Incident is created, however I'm having difficulty with editing the Incident. When the page loads for edit, I populate the form and then store the responses in the viewstate. When the user changes the list of responses (adds one, deletes one or edits one). I store this back into the viewstate. Then when the user clicks the save button, I'd like to save the changes to the Incident and the Responses back to the DB. I cannot figure out how to get the responses from the detached viewstate into the Incident object so that they can be updated together. Currently when the user clicks save, I'm getting the Incident to edit from the db, making changes to the Incident's fields and then saving it back to the DB. However I can't figure out how to have the detached list of responses from the viewstate attach to the Incident. I have tried the following without success: Clearning the Incident.Responses collection and adding the ones from the viewstate back in: Incident.Responses.Clear() for each objResponse in Viewstate("Responses") Incident.Responses.add(objResponse) next Creating an EntityCollection from my list and then assiging that to the Incident.Responses Incident.Responses = EntityCollectionFromViewstateList Iterating through the responses in Incident.Response and assigning the corresponding object from viewstate: for each ObjResponse in Incident.Responses objResponse = objCorrespondingModifedResonseFromViewState Next These all fail, I'd like to be able to merge the changes into the Inicdent object so that when the BLL calls SaveChanges on the changes to both the Incident and Responses will happen at the same time. Any suggestions? I keep finding lots of stuff about assigning foreign keys (singular), but I haven't found a great solution for doing a set of entities assigned to another entity in this manner.

  Read the article

• How do I abort a socket.recv() from another thread in python?

  - by Samuel Skånberg

  I have a main thread that waits for connection. It spawns client threads that will echo the response from the client (telnet in this case). But say that I want to close down all sockets and all threads after some time, like after 1 connection. How would I do? If I do clientSocket.close() from the main thread, it won't stop doing the recv. It will only stop if I first send something through telnet, then it will fail doing further sends and recvs. My code look like this: # Echo server program import socket from threading import Thread import time class ClientThread(Thread): def __init__(self, clientSocket): Thread.__init__(self) self.clientSocket = clientSocket def run(self): while 1: try: # It will hang here, even if I do close on the socket data = self.clientSocket.recv(1024) print "Got data: ", data self.clientSocket.send(data) except: break self.clientSocket.close() HOST = '' PORT = 6000 serverSocket = socket.socket(socket.AF_INET, socket.SOCK_STREAM) serverSocket.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) serverSocket.bind((HOST, PORT)) serverSocket.listen(1) clientSocket, addr = serverSocket.accept() print 'Got a new connection from: ', addr clientThread = ClientThread(clientSocket) clientThread.start() time.sleep(1) # This won't make the recv in the clientThread to stop immediately, # nor will it generate an exception clientSocket.close()

  Read the article

• Parsing Strings ( .crt files )

  - by user1661521

  Base Knowledge : I have a .crt file ( certification authoritie file ) and he is composed of many fields but in one line that resumes this question i have this : Certificate: ...(alot of stuff before)... Subject: C=US, ST=Maryland, L=Pasadena, O=Brent Baccala, OU=FreeSoft, CN=www.freesoft.org/[email protected] Subject Public Key Info: ...(alot of stuff after) and i need to parse the file to populate a .csv file and i have that done the problem that i need help is, i need to get the field: CN=www.fresoft.org but when i get this kind of CN=...(Value instead of the ...) with alot of slashes i get a error in the parsing like the raw string is: CN=foo/bar/the/hell/emailAddress=blablabla and i need only: foo/bar/the/hell and for a moment i got that in the correct column but when i dont have the emailAddress something just fail in my parsing and i then get in my CN .csv column the information wrong instead of |CN| foo/bar/the/hell i get: |CN| OU=FreeSoft, foo/bar/the/hell. I have this code doing the CN parsing: #!/bin/bash subject_line=$(echo $cert | grep -o "Subject:.*Subject Public Key Info") cn=$(echo $subject_line | grep -o "CN=.*" ) if [ $(echo $cn | grep -c ".*email.*") -gt 0 ]; then end_cn=$(echo $cn | grep -b -o emailAddress) end_cn_idx=$(echo $end_cn | grep -o .*:) final_end_cn=${end_cn_idx:0:-1} common_name=${cn:3:$final_end_cn-4} echo $common_name else end_cn=$(echo $cn | grep -b -o "Subject Public Key Info") end_cn_idx=$(echo $end_cn | grep -o .*:) final_end_cn=${end_cn_idx:0:-1} common_name=${cn:3:$final_end_cn-5} echo $common_name fi

  Read the article

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >