Search Results

Search found 5572 results on 223 pages for 'cpu'.

Page 138/223 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• Setting affinity on windows server 2003

  - by Samuel

  I have a program that by default only runs on one CPU. I have tried using the start /affinity x notepad.exe batch command but i can't get it to run my program. it changes the title of the command line window but doesn't execute the program. this start command does work for notepad so it might just be a problem with the software. I have set the affinity manually via task manager so i know it works. I am not the programmer of this software so changing that is not an option.

  Read the article

• the more DVDs at the same time , the slower the burning!

  - by sajad

  hi i'm using nero to burn multi DVDs at the same time. When i burn 1 DVD at one time it takes about 8 mins to finish. but when i try to burn 4 DVDs at the same time, it takes about 40 mins! why does it take too longe to burn multi DVDs at the same time? i don't have any problem with hardware because when i'm burning dvds , less than 20 % of my cpu & RAM are in use. thx in advance.

  Read the article

• MBP becomes very hot after using Xcode

  - by Globalhawk

  Hardware: MBP early 2011 version OS: Mountain lion App: Xcode 4.5.2 Problem: Every time when I start Xcode, 2 or 3 processes called "git" start running. But when I quit Xcode the "git" process won't quit and are still using a lot of CPU. Then the computer becomes quite hot and the battery gets drained very quickly. If I manually kill these processes the problem is gone. I tried to reinstall Xcode several times but the problem comes back every time. It drives me crazy. Any help will be appreciated!

  Read the article

• Asus z53 laptop overheating problem

  - by Tiberiu Hajas

  hi all, wondering if anyone encountered overheating of asus laptop ? especially the z53 model ? usually the right side of the laptop and vent in the upper corner is blowing hot air when under even minimal load, the CPU temperature can easily get to 65-70C and GPU is even above 80C. I'm using NHC (notebook health control) to set to a higher conservatory power consumption but that helps only a bit, anyone opened up the case ? wondering is require a dust clean ...etc ? I still have some warranty on it. thanks

  Read the article

• Mongodump on Gridfs is killing the host IOs

  - by Raphael

  I'm trying to make a mongodump from our production mongodb while the production is running. We have three production instances, one regular mongodb, one with very few gb of data on gridfs, one with a larger amount of data on gridfs. All mongodb instances are running in version 2.4.9 on a ubuntu 10.04 virtual server. I use a mongodump command to export the bases to another server. Unfortunately our machines are virtually hosted in a "low performances" datacenter (vmware based) so when I try to export the large gridfs db, the disk IO hits 100% (and 50% of the cpu starts waiting for IO too). This has a very negative impact on the production applicatiosn because db access time is excessively increased, making the applications unusable. I'm looking for a way to regulate the mongodump so the export goes slower but cooler on the hardware ressources allowing better performances for the applications to run. Has anyone had a similar scenario ?

  Read the article

• Is a ext3 Linux filesystem byte order independent

  - by Lothar

  I have a good old HP-C3700 Workstation with PA-RISC CPU here that I would like to use as a subversion server for a very large repository. I just worry what happens if the workstation dies (everybody who knows this computer knows that it is running like an Abrams tank and unlikely to happen in the next decade). I'm using Debian Linux on this system. If the mainboard dies can I just plug the SCSI drive into a PC and read the files from a normal Intel Linux PC? Which software RAID levels would be safe?

  Read the article

• Blender Render Cycles

  - by usersuper

  I get a very poor Render in cycles. Not just minor problems, but just a cloud of of black and white dots and no contour at all. I read a lot about this now and couldn't get it to work. Does anybody know how to get the settings right. Or better what do I have to pay attention to get better renders. I also tried external renderer like Lux, which increased my CPU usage to 98 % (just the default cube and clicking on Lux and load materials). Is this normal and what could i do to improve that. I have various versions of Blender (2.61,2.62,2.63) on Mac OS X. Thanks for the time.

  Read the article

• Virtual Machine files on ramdisk doesn't run faster than on physical disk

  - by Landy

  I installed total 36G memory (4x8G + 2x2G) in the host (Windows 7) and I used ImDisk to create a 32G ramdisk and format it to NTFS file system. Then I copied the virtual machine (in VMware Workstation format) folder, including vmx, vmdk, etc... to the new created ram disk. Then I tried to power on it in VMware Workstation. What made me surprised is that the performance is not better than before. It cost almost the same time to power on the Windows 7 VM. I check the Resource Monitor in the Windows 7 host, and the statistics of CPU, disk, network are rather normal. The memory has reported 3000+ hard fault/sec when guest OS boot then drop to 0 after the guest powered on. Any idea about this issue? I had thought the performance of ramdisk will be better than physical disk in this case. Am I wrong? Thanks.

  Read the article

• Slow Web Performance on two Windows 2008 R2 Terminal Servers

  - by Frank Owen

  We have two Windows 2008 R2 servers that we use for agents to log into to access our customers systems. Saturday morning we received complaints that on both servers the web is running horribly slow. This happens on all websites and the majority of the time the web site times out trying to load. Other users located at the same site but using their desktop machine do not see any issue. We have rebooted the boxes and checked settings and cannot find the cause. The CPU/Memory/Network/Disk Space use on the server is very low. I thought it might have been a MS update causing the issue but it appears the last update was applied in January. We have rebooted both boxes and I am in process of trying a different browser. Any ideas what could be causing this?

  Read the article

• XenServer/Center: Shared SRs for hosts not in same pool?

  - by 3molo

  I would like to use the same SRs on XenServer hosts that are not able to be part of the same pool (because of not having the exact same cpu feature set, if I understand it correctly) in order to share templates, being able to (manually) start a host on another node, backing up running hosts on other hardware etc etc. The technology for SR can be any of iSCSI, NFS or CIFS, iSCSI would obviously be preferred. Trying to add an iSCSI volume renders a "This LUN is already in use as SR iSCSI - Shared Storage on pool xxxxxx.". Adding a NFS share on one XS host, creating a template there and then checking another XS host reveals they don't agree on used space etc. Coming from a vSphere world this is quite baffling, but if these are limitations then I will have to rethink some of the concepts for this low budget project.

  Read the article

• Problem with blue-sceens

  - by Oystein

  Hi I have a problem with my computer. I get bluescreens a lot. I get different bluescreen-codes everytime, and this happens randomly. This can happen when I boot my computer, when I'm surfing on the internett, when I'm away from the computer and are logged out... I tried to disconnect everything that was connected to my computer, beside the monitor. That didn't help. I have reinstalled Windows, changed memory, changed video card, but nothing of this helped, I still get bluescreens. I guess the problem here is the mothercard, CPU or HDD. But I want your opinion before I order anything new to my computer. Can you tell me what the problem is?

  Read the article

• How many VPS' can I create on my server?

  - by user197692

  I need to create as many VPS's on my dedicated server (KVM or OpenVZ) in order to sell them but I really don't know the answer. RAM calculation is simple, it's more about CPU resources, how many VPS's can hold. I'am talking about Intel i7-2600 (4 cores, 8 Threads). I need to deploy as many VPS's. It's all about the nr threads? i.e. 8 threads = maximum 8 x 1vCPU or maximum 4 x 2vCPU? I'am planning to use 1Gb and 2Gb memory on each VPS, the server has 16Gb (but I can raise RAM if need it. So, can I create 8 KVM VPS's with 4 vCPU and 2Gb ram each ? How about 20 VPS's with 1Gb ram and 4vCPU each? How is this decision affected by the hypervisor (KVM, OpenVZ, VMware)?

  Read the article

• What hardware makes a good MongoDB Server ? Where to get it ?

  - by João Pinto Jerónimo

  Suppose you're on dell.com right now and you're buying a server to run your MongoDB database for your small startup. You will have to handle literally tens of thousands of writes and reads per minute (but small objects). Would you go for 2 processors ? Invest more on RAM ? I've heard (correct me if I'm wrong) MongoDB handles the most it can on the RAM and then flushes everything to the disk, in that case I should invest on a CPU with a large L2 cache, probably 40GB of RAM and a solid state drive.. right ? Would I be better off with a high end (~$11,309, 2 expensive processors, 96GB of RAM) server or 2x(~$6,419, 2 expensive processors, 12GB of RAM) servers ? Is Dell ok or do you have better sugestions ? (I'm outside the US, on Portugal)

  Read the article

• Dell Studio XPS 16 Runs Hot

  - by dtbarne

  Specs: 1920x1080 i7 1.6 GHz quad core 6GB RAM 1GB ATI Radeon HD 6570M/5700 Series 500GB 7200rpm Hard Drive Love this laptop for many reasons, but it constantly runs hot (CPU is low 70s with basic tasks and often 80+ is not uncommon) and I'm finding it too much to deal with. The laptop feels very hot (almost too hot for a lap) and often gets so hot that the OS slows down or freezes altogether. I've tried cleaning it out and even replacing the thermal paste. I often use an external cooler, but it only helps 3-5 degrees and it's a pain to have to use. I've come to the conclusion that it just runs hot. I have two questions: What is to blame? The i7 processor, the gfx card, or is it just that this laptop has poor cooling? Does the Dell XPS 15 run cooler? I'm looking at replacing my current laptop, but I don't want to run into the same problem.

  Read the article

• BSOD constantly with same ntoskrnl.exe error and disk indicator is frozen

  - by Sheep

  BSOD constantly and the disk indicator is frozen. Error do not happen immediately, usually an hour after boot up. Here is the Minidump: Bug Check Code = 0x00000124 Caused By Driver = ntoskrnl.exe Caused By Address = ntoskrnl.exe+4b094c Crash Address = ntoskrnl.exe+4b094c Seems to be hardware problem, but I checked RAM, no error. I have two HDs installed, system is on SSD, data is on HDD. Checked SSD with the properties-tools-error-checking , no error. Re-installed several times, still happens even after removed HDD. Configuration: SSD: Crucial M4-CT064M4SSD2 with Firmware 0009 Intel HM65 CPU: i7-2630QM The SSD is set correctly, SATA III 6Gb/s enabled, and everything worked perfectly for nearly a year.

  Read the article

• Is it possible to restrict fileserver access to domain users using computers that are members of the domain?

  - by Chris Madden

  It seems domain isolation can be used to accomplish, but I'd like a solution that doesn't require IPsec, or more accurately, doesn't require IPsec on the fileserver. IPsec if done in software has a large CPU overhead and our NAS boxes don't support any kind of offload. The goal is to avoid authenticated users using non-managed machines to access network resources. Network Access Protection (NAP) and the various enforcement points looked promsiing but I couldn't find a bulletproof way to use them [which doesn't require IPsec on the fileserver]. I was thinking when a domain user accesses the NAS box it will first need a Kerberos ticket from AD, so if AD could somehow verify the computer that was requesting the ticket was in the domain I'd have a solution.

  Read the article

• failure daemon and changing pid number

  - by Alessandra Bilardi

  proftpd, sshd and apache processes run with /etc/init.d/its-script on linux distro. I was monitoring 21, 22 and 80 ports with farm monitoring service: every 5 minutes service check each port and notify only failure. The failures were 5-6 times on 24h. It seems that someone kicks the switch sometimes.. I add monit and collectd monitoring and the monitoring about 21, 22 and 80 ports is every 1 minute. I do not receive farm monitoring service notify. I receive only monit notify about failure and/or succeed/changing pid number of proftpd, sshd or apache process. The failures are still 5-6 times on 24h. collectd monitoing about cpu, load average and each process is regular and there are no peaks. There is nothing kicks the switch but there is something which determines failure monitoring. is it a simple interference or is it indicative of some abnormality? What could cause these failures?

  Read the article

• stdout and key press

  - by Jack

  Hi, when in console, if I press a key, some interrupt controller sends code of that key to CPU, which looks into some table and than represent that keypress by printing some charracter to stdout. But, is keyboard sending an ASCII code of that key, or just some standardised code? Since there is so many languages and extra characters, OS must further translate its code into some character according to user selected scheme, I guess. I ask, becouse I am from Czech Republic, and we use some characters that do not exists in standart ASCII code. So I was thinking, if I enter this character into a console, and then print it, lets say in C++ using cin and cout, and I have set locale to Czech, stdin must actually send some non-ASCII code of the character I pressed to input stream. Am I right?

  Read the article

• Clear / Flush cached memory

  - by TheDave

  I have a small VPS with 6GB RAM hosting a couple of websites. Recently I have noticed that my cached memory size is quite high - see below: Cpu(s): 0.1%us, 0.1%sy, 0.0%ni, 99.1%id, 0.0%wa, 0.2%hi, 0.4%si, 0.0%st Mem: 6113256k total, 5949620k used, 163636k free, 398584k buffers Swap: 1048564k total, 104k used, 1048460k free, 3586468k cached After investigating if there is some method to have this flushed or cleared I stumbled upon a command which is: sync; echo 3 > /proc/sys/vm/drop_caches I read it could be useful to add this to a chron-task/job. Is this method recommended or could this lead to potential problems? The only concern I have is that I use one Magento installation on Memcached - could this have any negative effects on it? I am certainly not a pro therefore I would very much appreciate some expert advise. PS: My VPS runs on CentOS 5 x64 and I have WHM + NGINX installed.

  Read the article

• Need to upgrade DDR2 RAM on HP Desktop

  - by jds

  I have this HP Pavilion Desktop. As you can see, that page says the memory speed supported is PC2-4200. It currently has a 512 MB stick - CPU-Z Screenshots: hxxp://i41.tinypic.com/j5clj6.jpg and hxxp://i39.tinypic.com/20tldlc.jpg However, a crucial.com scan gives a slightly different report - hxxp://crucial.com/systemscanner/viewscanbyid.aspx?id=5718CFE831D926C3 It says the system can support PC2-5300 memory. So my question is which one should I trust? I want to upgrade the computer's ram to 2 GB (the maximum supported), because XP Media Center is giving me problems and I will install Windows 7 on this. PC2-6400 is the most common DDR2 memory I have been able to find here in the market. Will it cause any problems if I install 2 × 1 GB PC2-6400 DDR2 memory sticks (in dual channel) in this computer, (afaik, it will just run at the lower speed of 533 MHz, or whatever the motherboard supports), or do I absolutely need to get PC2-4200 sticks?

  Read the article

• Very High Network out in ec2 instance

  - by Jatin

  I launched an ubuntu-14.04-64bit instance in Amazon EC2 two days back. And I started Tomcat 7.0.54 in that instance and deployed my application war files. It has no other software installed other than tomcat and the default ones. In the past 2 days, its shows 858 GB of Data Transfer(Network Out) from that instance. I have attached a graph of Amazon CloudWatch Metric "Network Out" My application does not do any data download/upload. Its a Java Spring application and the front end is in HTML&Javascript. My application traffic was very low (less than 20 hits) in those 2 days. Is there a way to find out why these data transfers happened and also to find what data has been transferred. If you can see in graph, network out was 20gb per minute. Some more info: Network in was negligible CPU Utilization was very high Everything else was low

  Read the article

• Open a screen session inside a certain user on boot Ubuntu Server Linux

  - by Pez Cuckow

  I currently have a private server which I test my web apps on which runs Ubuntu Server 10.04 I also host a few game servers (rather than having wasted CPU time :-D) for some of my friends. These game servers I run in the game user account and each one has it's own screen session (so friends can ssh in and reboot the game server etc...). For example screen -R l4d2 runs ./start in the L4D2 folder. However if I reboot the server (which I have to do occasionally) all these sessions close and I have to manually create all the screen sessions and run the required games within them. Is there a way to set these screen sessions as Daemons or services or just boot on server start so they restart themselves on server reboot? I hope I have made my question easy to understand but feel free to ask questions! Many thanks,

  Read the article

• Is there a test to see if hardware virtualization (vmx / svm) are presently enabled within a Linux session?

  - by Dr. Edward Morbius

  I'm writing procedures for configuring VirtualBox support for 64-bit SMP guests, which requires hardware virtualization suppot (VTx/Intel, AMD-V/AMD). I have successfully configured this myself, however I'd like the procedure to be clear. sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo | egrep -q '(vmx|svm)' && echo Has hardware virt || echo No HW virt ... shows if the CPU is capable. I've still got to go enable the feature in BIOS. Any way to test from within Linux to see that this is no or not? Thanks. (Edit: s/xvm/svm/ in title)

  Read the article

• CentOS default installation gave 60% disk space to tmpfs partition

  - by garconcn

  I installed a CentOS server which will be used for xen hypervisor. The server has two Intel(R) Xeon(R) CPU E5620 and 148G memory. The OS was installed on a 120G SSD drive. After the installation, I found that the tmpfs partition occupied about 60% of the drive. Even though I don't need much space for the OS, will there be any problem with 71G tmp partition? Thanks for any comment. [root@cloud ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 55G 1.1G 51G 3% / /dev/sda1 99M 13M 82M 14% /boot tmpfs 71G 0 71G 0% /dev/shm

  Read the article

• fstab line for auto mount drive that all users can read/write

  - by evilblender

  I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection. I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives. I have created the directory /archive/ where I would like the drive(s) to mount. The drives are all formatted Fat 32 - but in the future I may use HFS for formatting. When I used the command (as root): mount /dev/sdc1 /archive the drive was mounted (but read only) What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing) Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives? Thank you. Jeff

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >