Search Results

Search found 4068 results on 163 pages for 'intel gma'.

Page 138/163 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

  • Can't Get Mac Mini to turn on - no screen, no beep, only the fan, power light, and optical drive noi

    - by pibyers
    I have an Intel-based Mac mini mid-2007 (Model A1176). This is the computer my kids use so I don't use it regularly. The computer had been working fine until one day my kids told me that it no longer works. The computer will not boot up. When I turn it on the fan turns, the white power light in the front turns on, and there is a sound that appears to be from the optical drive (rather than hard drive). I don't get anything to the monitor, nor do I get any dings or other start up sounds from the computer. Here is what I've tried thus far to no avail: 1) Swapped out the monitors early on since I figured that was my weak link - no change 2) Reset the PMU - no change 3) Tried to boot up from the System Disk - The mini loaded the dvd into the drive, but nothing else (I can't eject the disk so I can put it back) 3) Start up the computer in target mode connected to another mac - I tried this too, but I never received a chime or the disk show up on the other mac. I'm about out of ideas apart from scraping the computer. Does anyone have any ideas that I can try? Again, nothing has been done to the computer in at least 6 months when I upgraded the RAM. I'm also still on Leopard. Thanks.

    Read the article

  • I keep losing wireless connection

    - by posfan12
    I have a WRT54GL v1.1 wireless router and a WUSB54G v4 wireless adapter, both made by Linksys. The router is in the living room by the TV and the my computer is in the bedroom. My ISP is Brighthouse. Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU Intel Core 2 Duo E6600 @ 2.40GHz 36 °C Conroe 65nm Technology RAM 3.00GB Single-Channel DDR2 @ 333MHz (5-4-4-14) Motherboard eMachines EMCP73VT-PM (CPU 1) 26 °C Graphics ASUS VS247 (1920x1080@60Hz) 767MB GeForce GTX 460 (nVidia) 43 °C Hard Drives 466GB Seagate ST350041 8AS SCSI Disk Device (SATA) 35 °C Optical Drives HL-DT-ST DVDRAM GH41N SCSI CdRom Device Audio High Definition Audio Device The problem is that my Internet connection will work fine for 15 minutes or so. Then the data will just stop flowing. Windows says I am still connected, and the systray icon still shows five bars. But Comodo Firewall will stop showing up and down traffic, and another of my systray applications complains about a lack of connection. What I usually do is either disconnect from the network manually, or unplug and re-plug the USB adapter. At which point the connection will work properly for another 15 minutes. I've tried unplugging my router for 30 seconds and letting it reboot. I've also tried looking for a newer driver for my adapter but I seem to have the latest version 3.1.3.0. This is a recent problem starting about a week ago. For the previous several months things were working just fine. I haven't made any changes to my system that I am aware of. The only thing I did was open my case to blow the dust out of it, then put everything back together. How do I fix this issue?

    Read the article

  • Monitor connected with WiDi just shows a black screen

    - by Pops
    I have a Dell XPS 18 and want to use an external monitor with it. The monitor has VGA and DVI-D inputs. The XPS 18 has no video output ports, but it does support Intel WiDi. I have a Netgear P2TV2000 WiDi receiver, but it only has composite and HDMI outputs. I'm connecting the receiver to the monitor with an HDMI cable and an HDMI/DVI-D adapter. So, in short, the video path is: Computer → WiDi → WiDi receiver → HDMI cable → HDMI/DVI-D adapter → Monitor After setting all this up, I can't get anything to display on the monitor. At the moment I power the monitor on, I can see my desktop for a brief fraction of a second, and then everything goes black. All of the relevant drivers have been updated to the latest versions. When I use a different WiDi-enabled computer to connect to the same monitor, everything works fine. When I use the original computer and receiver to connect to a TV, everything works fine. It's only when I connect the original computer to the monitor I want to use that the connection fails. What could be going wrong here, and how can I get the video to work consistently?

    Read the article

  • Installing GitHub for Mac - "Github cannot be opened because of a probem"

    - by betitall
    I'm trying to get started using Git for Mac, but I receive an error when I try to run the program. I'm new to GitHub and relatively new to Mac. First, I installed Git using the downloadable .dmg file named "git-1.7.12.3-intel-universal-snow-leopard". I ran the .pkg file contained therein and the install seemed to work fine. I'm using a new macbook pro w/ retina. Then I downloaded the Github for Mac installer, "mac_GitHub for Mac 69.zip". When I double-click the file, it shows that there is a single file of type "Application". Double-clicking that application file produces the error: "GitHub cannot be opened because of a problem". Here are the partial details of that error: Application Specific Information: dyld: launch, loading dependent libraries Dyld Error Message: Library not loaded: @executable_path/../Frameworks/Rebel.framework/Rebel Referenced from: /Applications/GitHub.app/Contents/MacOS/GitHub Reason: no suitable image found. Did find: /Applications/GitHub.app/Contents/MacOS/../Frameworks/Rebel.framework/Rebel: file too short /Applications/GitHub.app/Contents/MacOS/../Frameworks/Rebel.framework/Rebel: file too short Any help would be much appreciated. Thanks.

    Read the article

  • Second ip address on same interface CentOS 6.3

    - by user16081
    I tried to add a second LAN addresses in CentOS 6.3 on a brand new install and it's not working. I installed a new copy of CentOS 5.7 and tried the same and it worked right away. Now I'm just trying to setup the alias on the same subnet and it's not working. what am i doing wrong, is this not possible on CentOS 6.3? second ip address on the same interface but on a different subnet CentOS 5.7 it works: DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.167 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.166 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes On CentOS 6.3: does not work DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.242 NETMASK=255.255.255.0 NETWORK=192.168.0.0 GATEWAY=192.168.0.1 ONBOOT=yes DNS1=205.134.232.138 DNS2=4.4.4.4 DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.240 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes # /etc/init.d/network restart Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK Bringing up interface eth0: Active connection state: activated Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/3 [ OK ] # ping 192.168.0.240 PING 192.168.0.240 (192.168.0.240) 56(84) bytes of data. From 192.168.0.242 icmp_seq=2 Destination Host Unreachable Appreciate any advice, thanks Update: Perhaps this is relevant? On CentOS 5.7: # dmesg |grep eth eth0: registered as PCnet/PCI II 79C970A eth0: link up eth0: link up On 6.3: # dmesg | grep eth e1000 0000:02:00.0: eth0: (PCI:66MHz:32-bit) 00:0c:29:1e:de:86 e1000 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None 8021q: adding VLAN 0 to HW filter on device eth0 eth0: no IPv6 routers present

    Read the article

  • cups log kills ubuntu 12.04 and sudoer permissions changed

    - by peterretief
    I am using Ubuntu 12.04 as a desktop and recently had a weird crash with the log file for cups filling up the entire drive and not letting me back in, also what changed was /var/lib/sudo had changed from root to peter (me) I didn't make this change - I checked the history! I set the sudoers back to root and capped the max size for cups log Anyone had a similar experience? It feels like someone is messing around with my settings Is there any way to trace how the error occurred? Logs auth.log Jan 1 02:04:13 peter-desktop lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) Jan 1 02:04:13 peter-desktop lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 Jan 1 02:06:53 peter-desktop lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) Jan 1 02:06:53 peter-desktop lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 syslog Jan 1 02:04:13 peter-desktop rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="903" x-info="http://www.rsyslog.com"] start Jan 1 02:04:13 peter-desktop rsyslogd: rsyslogd's groupid changed to 103 Jan 1 02:04:13 peter-desktop rsyslogd: rsyslogd's userid changed to 101 Jan 1 02:04:13 peter-desktop rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] Jan 1 02:04:13 peter-desktop bluetoothd[898]: Failed to init gatt_example plugin Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] Linux version 3.2.0-25-generic-pae (buildd@palmer) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #40-Ubuntu SMP Wed May 23 22:11:24 UTC 2012 (Ubuntu 3.2.0-25.40-generic-pae 3.2.18) Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] KERNEL supported cpus: Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] Intel GenuineIntel Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] AMD AuthenticAMD Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] NSC Geode by NSC

    Read the article

  • Should I enabled 802.3x hardware flow control?

    - by Stu Thompson
    What is the conventional wisdom regarding 802.3x flow control? I'm setting up a network at a new colo and am wondering if I should be enabling it or not. My oh-cool-a-bright-and-shiny-new-toy self wants to enable it, but this seems like one of those decisions that could blow up in my face later on. My network: An HP ProCurve 2510G-24 switch A pair of Debian 5 HP DL380 G5's with built-in NC373i 2-port NIC LACP'd as one link. 9000 jumbo frames enabled. (Application) A pair of hand-built Ubuntu server with 4-port Intel Pro/1000 LACP'd as one link. 9000 jumbo frames enabled. (NAS) A few other servers with with single 1Gbps ports, but one with 100Mbps. Most of this kit is 802.3x. I've been enabling it as I go along, and am about to test the network. But as my 'go live' day nears, I am worried about the 802.3x decision as I've never explicitly used it before. Also, I've read some 10-year old articles out there on the Intertubes that warn against using flow control. Should I be enabling 802.3x hardware flow control?

    Read the article

  • GlusterFS on VMWare ESXi 5

    - by Dharmavir
    I want to build network file system on top of my VMWare ESXi based virtual nodes which are running Ubuntu 12.04 LTS. I am evalaluating options and found that GlusterFS (http://www.gluster.org/) can turn out to be a good choice. Purpose: I have about 2 dozen VM nodes with different configurations, on 2 physical nodes which has following configuration: 16 core Intel Xeon 1 TB 48 GB RAM Now as I said earlier each Physical server has about 1TB hdd and I can increase if I want additional so for now I have 2TB disk space available, these space is distributed in VM nodes I have created on which about 2 dozen VM nodes live. Now some of them being application server and mgmt server, they have plenty of free disk space which I want to utilize for some heavy storage which I can not design if I do that individually on single VM node. This way if my storage is distributed between dozens of VM nodes and about 2 or more physical nodes I have some sort of backup as well. I do not mind if data gets stored redundently but per my knowledge it might hapeen that individual VM nodes will not be able to store all of the data because complete data size for example if we take 100GB will exceed VM disk size of 70GB and then VM will also have system and program files on it. I need some suggestion that will GlusterFS be the solution for which I am looking forward to or I should go with something like hadoop? I am not too sure. But yes, I would like to utilize my free space on each VM node and while doing that if I get store data redundently I am okay because it will give me data security.

    Read the article

  • Why is windows 7 rejecting my key?

    - by acidzombie24
    I'm extremely confused. I have a genuine key and CD (I can take photos) and I am trying to install windows on my new tower. I believe this would be the 3rd PC i installed it (old, laptop now new tower). However i did change the HDD once but i doubt windows would think its a different computer bc of that. After going through phone activation it said i installed it on to many pcs..... i'm extremely confused. I'll be happy to deactivate it off my old tower if i knew how. I already grabbed all the files off of it. I tried to look up the amount of boxes i can install windows home premium on and found this http://en.wikipedia.org/wiki/Windows_7_editions What stuck out was this Maximum physical CPUs supported[40] 1 1 1 2 2 2 My new tower has 4cores (its the intel i7) but has two threads each so it sees 8. Does that have anything to do with this? But apparently ultimate supports '2'. I'm sure windows support more than 2 cpus so... what gives? Actually its physically one CPU so i guess the number of cores doesn't matter? Why is windows 7 rejecting my key?

    Read the article

  • LCD monitor flicker when connected to a laptop using VGA

    - by Björn Lindqvist
    I have a dual screen setup with two AOC e2450Sw monitors connected to a laptop. The laptop has one HDMI and one VGA output. When one of the monitors is connected using VGA, it flickers or displays static noise. The flickering is fairly subtle and only visible on darker colors. But it is there and noticable and appears like horizontal lines. The problem only appears on the monitor connected to the laptop using the VGA cable. If I swap the monitors, the one connected using VGA is displaying the flicker but not the one connected using HDMI. The simple solution would ofcourse be to connect both monitors using HDMI, but since the laptop only has one VGA and one HDMI out that isn't possible. I've tried tweaking the monitor setting using the OSD menu, but it had little or no effect. Update: After several more trouble shooting hours, it seems the problem is not related to the monitor or VGA cable as the problem persists even if I swap the display with another brand and different cables. So it may be the graphics card? Intel HD Graphics 4000. The laptop is Acer Aspire E1-571.

    Read the article

  • Apache2 - 500 internal server error

    - by Lucio Coire Galibone
    i'm running a VPS with Linux CentOs 6 with 4 GB of RAM, 10 GB of HD and 2 virtual CPU Intel(R) Xeon(R)CPU L5640 @ 2.27GHz. As my host says each virtual CPU must be at least 0.5 physical cpu. At certain times of the day, those with more traffic, trying accessing my php script i receive intermittently "500 internal server error". I activate logging to debug level from apache, and also the PHP logging with E_ALL, but I can't find reference to Error 500 in any logs(I checked the right logs!). I haven't got any .htaccess file in path script. The strange thing is that the error start at first php line in the script (the previous html displays correctly, but at the first php line the script send 500 error). The cpu load is always good (max 0.15 0.08 0.01) and RAM is close to 95% but it arrived to swap just 2 times in a month with 2-5 MB. Apache works with prefork with this values: <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 280 MaxClients 280 MaxRequestsPerChild 4000 </IfModule> Everthing works correctly and I don't get any error in quiet times, but i start receive errors when traffic rises (6-9000 visits per hour). Can i solve the problem increasing resources? (i can upgrade RAM up to 16 GB). It can depend from reaching MaxClients (but apache must write it on log, right?)? If I upgrade RAM to 6 or 8 GB i have to calculate MaxClients value with this? MaxClients = Total RAM dedicated to the web server / Max child process size Max child process size is around 20M. How else can the problem be? Thanks in advance

    Read the article

  • does my machine configuration make sense?

    - by user1227914
    i couldn't think of a better place to ask this question, so here it goes. we're putting together a dedicated server for a website that will initially host the web server and the mysql database. as the website grows, we'll move the database to a different server and this machine will eventually only server the actual website. so the question is ...does my configuration look okay? it's the first time i'm building a server from scratch so i want to make sure i don't combine components that don't fit or something. things like ..do the drives i picked work for the hot swap ..etc. what do you guys think? am i good to go with this configuration? :) Chassis: Supermicro SuperServer 6016T-MTHF (6x DDR3 SDRAM - ECC DIMM 240-pin, 2x LGA1366 Socket, Power Provided: 600 Watt, 4 (free) x hot-swap - 3.5") CPU: Intel BX80614E5620 Xeon E5620 Processor - 4 Core, 2.40GHz, LGA 1366, 5.86GT/s QPI 12MB Cache, 64-Bit, 80W, HyperThreading Memory: Crucial CT51272BB1339 4GB PC10600 DDR3 Memory - 1333MHz, ECC, Registered, 1x4096MB (possibly 3 or 4 of them) Hard Drives: Western Digital WD2002FAEX Caviar Black Hard Drive - 2TB, 3.5", SATA 6Gbps, 7200 RPM, 64MB (possibly 2 or 3). thank you very much for any professional advice :)

    Read the article

  • SYS-5016T-MTFB will not POST without manual assistance (Motherboard: X8STi-F)

    - by Dan
    I have a Supermicro 5016T-MTFB 1U server which I am in the process of setting up, but it has a really strange problem. When the system is powered on it will not POST until I press the reset button a few times, followed by pressing the delete key on the keyboard to "wake it up". If I power it on and do nothing, the fans spin up but nothing else happens at all. After pressing the reset button once, the red "overheat" light comes on and blinks which is supposed to indicate a fan failure - but all the fans are working. Pressing reset again usually stops the blinking, and the system starts the normal POST routine but it will not actually get to the bios screen unless I press delete. If I don't press delete, it just continues to hang. After pressing delete it will take me into the bios setup screen, if I exit without saving changes I can boot the system normally. I was able to successfully install Linux with no trouble...but upon rebooting the same problem happened again. This board has integrated IPMI which I thought was the problem, so I disabled it via the jumper on the board. Did not help. Each time this system powers on, it goes on for a second, then turns off again for another second, then turns back on again. I don't know why it does that. Here is what I put in the system: 1 x Xeon E5630 (Nehalem) 80W TDP (it's not overheating, CPU temps stay under 40 degrees C) 2 x Kingston 2GB x 3 DDR3-1066 Memory ECC, unbuffered, unregistered (kvr1066d3e7sk3/6g) 1 x Intel X25-M 160 GB 2 x Western Digital RE3 1TB

    Read the article

  • Issue running 32-bit executable on 64-bit Windows

    - by David Murdoch
    I'm using wkhtmltopdf to convert HTML web pages to PDFs. This works perfectly on my 32-bit dev server [unfortunately, I can't ship my machine :-p ]. However, when I deploy to the web application's 64-bit server the following errors are displayed: (running from cmd.exe) C:\>wkhtmltopdf http://www.google.com google.pdf Loading pages (1/5) QFontEngine::loadEngine: GetTextMetrics failed () ] 10% QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngine::loadEngine: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngine::loadEngine: GetTextMetrics failed () ] 36% QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () // ...etc.... and the PDF is created and saved... just WITHOUT text. All form-fields, images, borders, tables, divs, spans, ps, etc are rendered accurately...just void of any text at all. Server information: Windows edition: Windows Server Standard Service Pack 2 Processor: Intel Xeon E5410 @ 2.33GHz 2.33 GHz Memory: 8.00 GB System type: 64-bit Operating System Can anyone give me a clue as to what is happening and how I can fix this? Also, I wasn't sure what to tag/title this question with...so if you can think of better tags/title comment them or edit the question. :-)

    Read the article

  • Nvidia GTS 360M in Asus laptop shuts off when gaming on external display

    - by mr odus
    I have had this problem on my Asus G51j Intel I5, Nvidia GTS360M graphics card. Just updated the drivers to latest off Nvidias site. Most games I play, If I hook it up through an external monitor(this happens whether it's HDMI or VGA). The laptop hard shuts down after about 20 minutes, give or take. This tends to happen on more graphically intense games like Call of dutys, bioshock. I'm running Windows 7, latest nvidia drivers. Games work fine on my laptops screen, and Movies, general computing work fine on the external displays. The laptop always sits on a cooling pad and the latest time was in front of my AC unit, I ran heatfan or whatever the heat tracking software was, and my temperatures were normal through a shut down. This has been happening for the life of the laptop. I dont play very many games, and even fewer on an external monitor, so this issue doesnt come up much Is it possible I have a faulty graphics card? Is there anything else I can try?

    Read the article

  • How to let hard drive sleep in RAID1 configuration?

    - by Al Kepp
    Normally in Windows 7 a hard drive stops spinning when it is not used for a longer while. This can be configured in Windows and I use it on computers which are turned on 24/7 but not used much often. My problem is on a computer with Intel X79 chipset with an integrated RAID controller. There is Windows 7 installed on an SSD drive, and there is RAID1 array with two SATA HDD drives for data. Those SATA drives aren't used much so I'd like to let them sleep (i.e stop spinning). But they ignore settings in Windows. How to let them sleep when using RAID1? It seems to me that those drives are "unstoppable", they are spinning 24/7 even when they aren't used at all. Maybe they would behave normally if I used Windows-based software RAID, but I use hardware RAID controller. Is there a way to let them stop spinning and sleep after for example 3 or 5 hours of inactivity (i.e. the same way as they would behave in Windows without RAID)?

    Read the article

  • Opera 10.5 RAM usage and Google Reader?

    - by David
    Hi all, Today I upgraded to Opera 10.5 from Google Chrome and I have two really important questions about it. 1) Is it normal for it to use SO MUCH RAM!!!!? Closing tabs doesn't help, but opening new ones add on to the usage. I can have just 4 tabs open and it goes up to the 300MB mark and I only have 1.5GB in my laptop, 596MB of it used by the graphics card so this really unacceptable. Is there a way to fix it? 2) Why does Google Reader feel so slow and unresponsive on it? It lags so bad when I just try scrolling through the page. I know Opera is known for being really smooth while scrolling through pages. There's also a white bar at the bottom of the page that I can get rid of. It blocks the "Next" and "Previous" buttons. The test between articles is also sort of intersecting each other and that just looks completely unattractive and that's something i'm not used with any web browser. I realize there's a built-in RSS reader, but it doesn't sync across multiple computers and is very late at updating. Here are my specs: Windows 7 Ultimate (x86), Intel Pentium M 1.86 GHz, 1.5GB RAM, ATI Mobility Radeon X600 (64MB dedicated, 596MB shared)

    Read the article

  • Getting the most out of a Mac mini as a media center

    - by celebritarian
    Hello! I own an old Mac mini from 2006 (maybe early 2007). It's got an Intel Core Solo 32-bits CPU and 512 MB RAM. 160 GB HDD. The GPU is an integrated chip… Currently, my Mini is sitting under my LCD TV (720p). It's plugged in via a DVI to HDMI cable. It's currently running Leopard. And unfortunately, Snow Leopard can't be installed on a device with less than 1 GB of RAM… So, my Mac mini isn't exactly powerful. Also, it's slow and Mac OS X is not a pleasant experience on my Mini right now. It feels slow and heavy. I want to use my Mac mini as a media center/player. I want to be able to play video files in 720p (H.264, Matroska/MOV files). So basically, playing high-def videos is all I want to do with my Mini. What OS should I install? Stick to OS X? Optimize for video playback? Or should I install another OS — like Win XP, Ubuntu or any other Linux dist? Then, will my Mini be able to play 720p videos smoothly, even though the CPU and GPU aren't that powerful and with the limit of 512 MB of RAM? Appreciate all help. Thanks in advance!

    Read the article

  • Looking for a short term solution to improve website performance with additional server

    - by Tanim Mirza
    I am working with a small team to run an internal website running with PHP 5.3.9, MySQL 5.0.77. All the files and database are hosted on a dedicated Linux machine with the following configuration: Intel Xeon E5450 8 CPU cores @3.00GHz, 2992.498 MHz, Cache 6148 KB, Cent OS – Red Hat Enterprise Linux Server release 5.4 We started small and then the database got bigger and now the website performance degraded significantly. We often get server space overrun, mysql overloaded with too many calls, etc. We don't have much experience dealing with these issues. We recently got another server that we were thinking to use to improve performance. Since it has better configuration, some of us wanted to completely move everything to the new machine. But I am trying to find out how we can utilize both machine for optimized performance. I found options such as MySQL clustering, Load balancer, etc. I was wondering if I could get any suggestion for this situation "How to utilize two machines in short term for best performance", that would be great. By short term we are looking for something that we can deploy in a month or so. Thanks in advance for your time.

    Read the article

  • Overclock Failed

    - by John
    This morning when I tried to turn on my computer, the monitor would not display anything. The computer is on, but no UI on the monitor and no beep. I turned off the computer and turn it back on again. This time, the computer was on for about 2 seconds and automatically turned itself off for about 2 second and automatically turned itself back on. This happened two times without the monitor displaying any UI. On the third try, the computer did the same thing but when it turned itself back on, the monitor displayed this: American Megatrends Asus P8P67 Le ACPI bios Revision 1011 CPU Intel Core i5 2500K CPU @ 3.30GHz Speed: 3300MHz Total Memory 4096 MB (DDR3-1333) USB Devices Total: 0 Drive, 1 Keyboard, 1 Mouse, 2 Hubs Detected ATA/ATAPI Deivces SATA6G_2 Hitachi HDs821010CLA 332 SATA3G_1 Corsair force 3 SSD SATA3G_2 HL-DT-ST DB-RE UH12CS28 Overclocking Failed! Please enter setup to reconfigure your system. Press F1 to Run Setup. After I pressed F1, it went into the Asus EF1 Bios Utility. I couldn't do anything in there so I just exited. After which, the computer auto turned off and on again and I was able to use the PC like regular. This has never happened to this computer before and the day before, nothing seemed wrong, just regular use and some gaming.

    Read the article

  • LSI 9260-8i w/ 6 256gb SSDs - RAID 5, 6, 10, or bad idea overall?

    - by Michael Pearson
    We're provisioning a new production server for our reasonably busy website. Our choice of host have available a 6 drive configuration with a LSI 9260-8i card. My initial thought was to fill all six bays with SSDs (Intel 520 256gb) and set them up in RAID. Good, bad, or terrible idea? Can the card handle it? Should we be using RAID 5, 6 or 10? This would be the first time the provider have filled all six slots for this rackmount with SSDs, so they're a bit hesitant. I'm wondering if somebody else with this card has done something similar in a production environment. We do about 43gb of writes per day and currently use about 300gb of storage. The server acts as webserver, database, and image store for approx 1 million files. The plan is to underprovision the SSDs by approximately 10% to 20% to increase their overall lifespan & performance. The fallback option is 2x480gb SSDs in RAID 1 and another 2x1TB HDDs in RAID 1. The motivation behind this is that the server rental cost difference between 2xSSDs and 6xSSDs is minimal (compared to the overall cost of the rental). We do not have any special high-IOPs requirements. However, if the configuration is known to work, I don't see a good reason to not use it and not have to worry about having separate 'fast and small' and 'slow and large' disks.

    Read the article

  • With Ubuntu 9.10, my DVD keeps spinning up

    - by Ken
    I have Ubuntu 9.10 on my Intel Mac Mini. When there's a DVD in the drive, and even if there's no program open at all (just looking at the desktop), every minute or so the disc spins up with a loud whirring noise, and I can hear it cranking the motor to seek across the disc. How do I find out what's causing this? And how can I make it stop? Thanks! EDIT: I straced nautilus, and saw nothing it's doing directly, even when the disc spins up. It does poll inotify regularly, but I don't know how to trace what it's watching, or if that's even how it receives disc-inserted notifications. It doesn't call inotify_add_watch when I insert a disc or mount it (or eject or umount), but it could be watching all of /dev already or something like that. Of course, a DVD is mounted read-only, so whether it's inotify or something else, it should never need to poll anything on that. And if it is inotify, it's happening in the kernel, and the kernel should really never need to poll a device it's mounted to check for notifications.

    Read the article

  • Dual Monitor Setup with Ati Radeon Hd 5700 results in unusabledesktop win7

    - by NorthPole
    I have an ATI Radeon HD 5700 card which i've been using under fully updated windows 7 with its latest drivers. My monitor is a 2004 NEC LCD1703M which despite being pretty old runs fine. A friend gave me an IIYAMA ProLite E1900WS monitor (2009 or 20010 ). Both monitors are vga only. I've been using a DLDVI to VGA adapter to connect my old monitor and tested the same adapter to the new monitor and it worked fine. So I bought an HDMI to vga adapter with the purpose of having a dual monitor setup. But when both screens are connected to the card the following problem occurs: The monitor connected to the hdmi port cycles between sleep and a black screen while the other shows the operating system for about two seconds before getting black for another two seconds. I can "use" the computer (move the mouse,click,type e.t.c.) while this happens but its not something pleasant. I tried reinstalling the driver, booting with both screens connected (in which case the powerup messages and the bios are mirrored in both screens until I get to the login screen where everything falls apart) Funny thing is, everything works if I disconnect the ATI graphics card and use the onboard intel one. So, any suggestions as to what might be the problem and how I can fix it?

    Read the article

  • Why my hard disk can't boot from the BIOS?

    - by Mario
    I installed a new sata DVD burner. When I turned on the machine (windows 7) it didn't boot. It can boot from a lubuntu CD. There is an option on lubuntu to boot form the first hard disk. If I select it, the machine boots normally to windows 7. So from the CD I can boot but not from the BIOS. I checked all the options more than once: boot from HD, not boot from removable, boot from USB, boot from optical. The order of the boot sequence is HD then DVD. I tried booting only with the HD; I disconnected both DVDs. I even tried recovery of the MBR: bootsect, bootrec, fixmbr, buildbcd, nt60, etc. So, the question is, does this have a reason, what's the difference between booting from the BIOS (as I think) to from the DVD?. The BIOS is intel, it has BIOS codes on the right bottom corner, it stays at 5A for a while. 5A is "Resetting PATA/SATA bus and all devices".

    Read the article

  • Windows 8 freezes after every other reboot on Lenovo W520 after about 10 seconds

    - by John Nevermore
    I have a Lenovo W520 laptop with i7-2760QM, intel 520 SSD and Nvidia Quadro 1000m. When i boot the PC with discrete graphics SET in BIOS, the computer totally freezes and the only thing left to do is reboot. This only happens with NVidia drivers for Windows 8 x64 installed (I've tried about 4 different drivers on Nvidia's site). When i boot the PC with integrated graphics set in BIOS, there is a momentary "hickup" after about 10 seconds (instead of freezing) and then everything is working fine. When i boot the PC with discrete graphics ON and no Nvidia drivers installed, the same thing happens as described above with integrated graphics. I've tried doing 1) bcdedit /set disabledynamictick yes 2) Disabling VT-x in BIOS (Seriously would prefer not to disable it, since i use VM-s almost every day) but no dice. The only thing that worked was to enable the Hyper-v feature. I was then able to boot properly with discrete graphics and Nvidia drivers installed, but since i use VMWare for VM development this was no solution (VMWare complained about not being able to launch because of Hyper-v being installed). I followed the instructions in this tutorial, to be able to run VMWare. Then the computer just booted into a black screen past Windows logo. How to boot Windows 8 x64 without freezing with Quadro 1000M enabled, Nvidia Drivers installed and Hyper-v feature preferably disabled ?

    Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >