picture and fax viewer - Page 138

Extended display - nightmare

- by user206343

I have been struggling for quite a while, and I hope one of you can shed some lights on my issue. I am using Xubuntu 13.10 (Ubuntu 12.04LTS behaves the same way, higher version wouldn't install, LinuxMint didn't install, Fedora didn't install). I am trying to set extend display for two dell monitors 1900x1200. It works great when in mirror mode, but I just cannot extend the display. Either one monitor goes to sleep and the other is unresponsive, or both work but are unusable. This is a link to the picture of my monitors in mirror mode This is link showing what happens after I try to extend the desktop I get the same results if I use aRandr or the built in configuration utility. I have an ATI Radeon X300 card. I cannot use proprietary Catalyst drivers (I would have to use the legacy ones, which would force me into using much older version of the OS). Extension is possible with Windows. I am hoping someone can come up with tweaks that would allow me to run an extended desktop. I truly love Xubuntu (and Ubuntu, unfortunately, Unity is a bit too heavy for my old PC, and I have to run in 2D mode, so 12.04 is as high as I can go). I have tried everything I could find online, but nothing worked thus far. I believe some configuration or something I am missing might work. Please, if you have any idea, do not hesitate. Thanks guys.

Read the article

ubuntu 12.10 grub doesn't appear efi mode

- by user100604

After a number of failed attempts on installing Ubuntu and Linux in the hybrid-gpt of Windows, in which I wanted different partitions by gparted, I ended up creating againg a conventional partitions table within the conventional system. This photo is not mine because as creating the partition I did not think in taking photos, but I am showing you it so that you can see the format “MS-DOS”, the standard format of gparted. My neetbook is a k55MV Asus 500GB (the page don't allow me to put 3 hiperlink I will put it at the end in a new coment 1) I installed Windows by creating a partition just for it. Windows created two partitions else for starting the system up. However creating it on ms-dos appear now in gpt view fotos 2) With the rest of the space, I created a 90-gigabyte partition for Ubuntu and the “swap” of 4 gb. The other partitions are for data. 3) I assured myself about installing Ubuntu in the partition whose format was ext4, for using that partition as base and to install the “grub” on the base of 500gb. I have boot the system up, Ubuntu is loaded but the grub does not appear. I have tried by pressing “beginning” “UPPER CASE LETTER”, but no way! I have checked the flies up, and partitions are there. http://www.subirimagenes.com/imagen-capturadepantalla-8080960.html By pressing fdisk-1, this picture comes up: http://www.subirimagenes.com/imagen-capturadepantalla-8080965.html I am spanish updated: at the beginning of the system, pressing f12 appears a grub without windows

Read the article

Problem with understanding how to start

- by Coolface

Okay, this might be a little off-topic but i try anyway. Sorry to bother. So i'm working as sysadmin for at least 5 years now and i quite enjoy IT field in general. Somehow i was never interested in programming much but always want to learn something at least easy and for personal usage. As sysadmin i need scripting skills so learn shell scripting without much problems, i also try to learn pascal, delphi, basic over time and must recent was python. Well, my problem is when i try to learn programming i just can't apply what i learn from the books to the real word. What i mean is i understand there are data structures, algorithms, variables, lib's, if-then logic, etc. but i just can't understand how to apply this things when i want to do real things. Like i want to get a something simple as parse web page, i draw a quick algorithm like get a web page, find a word on it and write a to file, on the paper everything look simple but when i get to the coding i just stuck pretty much from the start. I try read code of the real programs that just totally confusing especially big parts with many classes so i'm just quickly lost a trail what this code do. I think i just lack some fundamentals to see a big picture but don't really know what this might be? Or maybe i just don't have a passion to programming at all... My best bet was a shell scripting so i have really no problems to write complex scripts but this just not enough. Recently i was read around 5 or 6 python books because everyone say it's so easy even kid can code something but still no much luck, python is good and easy but i can't make something harder then a prodecurial style code like in bash for easy things but when i want harder things i'm still stuck. In college i was also not a math and tech guy and like to study non-tech stuff mostly like economy, psychology maybe that my problem? Anyway any advice would be greatly appriciated.

Read the article

AR9485 wireless card loses ability to connect after hibernation

- by DrewDiezel

This has happened twice now, the first time it happened I just reinstalled Ubuntu. The only things that I've been messing with in terms of networking, have been restarting the network-manager service after I resume from hibernate (because it never works right after resume, but restarting the service fixes that), and changing my mac address with ifconfig wlan0 down && ifconfig wlan0 hw ether 11:22:33:44:55 && ifconfig wlan0 up. using tail | dmesg returns a bunch of attempts to connect, saying something like authenticating ... okay you're connected! now I'm going to just disconnect because I feel like it. (reason=3). Any ideas? If it helps maybe I'll add a picture of the tail|dmesg output later. My wireless drivers are as follows: Atheros AR9485 Wireless Network Adapter Hamachi Network Interface Microsoft Virtual Wifi Miniport Adapter Realtek PCIe GBE Family Controller VirtualBox Host-Only Ethernet Adapter Here is a pastebin of some terminal outputs that could help. Also, the reddit thread has a few answers, for anyone curious. It's located here. It is entirely possible that it's just my school wifi blocking out my laptop, and my home wifi sucks. Wifi does work at places other than my home and school, however my phone can connect to both places. Here is a pastebin of the results of the wireless-info script.

Read the article

Live HTML Preview

- by netbeanstips

When you need to edit an HTML document in NetBeans you may find useful this little plugin that adds a Preview tab to HTML editor window. The plugin works with some small issues in NetBeans 7.4 but I recommend using development builds instead. So install the plugin, restart NetBeans and open any HTML document. Notice there's a Preview button in editor's toolbar (see the red rectangle in the picture below). Now split the editor window by dragging the split button at top right corner. You can also use menu View - Split - Vertically. Then in the bottom split part toggle Preview button. You will get a live preview of your HTML source code. The preview pane will auto-refresh as you edit the HTML code. There are even some handy tools in Preview toolbar, for example you can resize the preview browser to match the screen dimensions of various device types. I know there is full-blown HTML5 support in NetBeans 7.4. But if you need to edit a single document or when you're running Java-only NetBeans distribution this plugin may come handy... Note: The plugin is built on top of embedded WebKit browser which is based on JavaFX WebView component. So there might be some issue when using the plugin on some flavors of Linux.

Read the article

Tools and Utilities for the .NET Developer

- by mbcrump

Tweet this list! Add a link to my site to your bookmarks to quickly find this page again! Add me to twitter! This is a list of the tools/utilities that I use to do my job/hobby. I wanted this page to load fast and contain information that only you care about. If I have missed a tool that you like, feel free to contact me and I will add it to the list. Also, this list took a lot of time to complete. Please do not steal my work, if you like the page then please link back to my site. I will keep the links/information updated as new tools/utilities are created. Windows/.NET Development – This is a list of tools that any Windows/.NET developer should have in his bag. I have used at some point in my career everything listed on this page and below is the tools worth keeping. Name Description License AnkhSVN Subversion support for Visual Studio. It also works with VS2010. Free Aurora XAML Designer One of the best XAML creation tools available. Has a ton of built in templates that you can copy/paste into VS2010. COST/Trial BeyondCompare Beyond Compare 3 is the ideal tool for comparing files and folders on your Windows or Linux system. Visualize changes in your code and carefully reconcile them. COST/Trial BuildIT Automated Task Tool Its main purpose is to automate tasks, whether it is the final packaging of a product, an automated daily build, maybe sending out a mailing list, even backing-up files. Free C Sharper for VB Convert VB to C#. COST CLRProfiler Analyze and improve the behavior of your .NET app. Free CodeRush Direct competitor to ReSharper, contains similar feature. This is one of those decide for yourself. COST/Trial Disk2VHD Disk2vhd is a utility that creates VHD (Virtual Hard Disk - Microsoft's Virtual Machine disk format) versions of physical disks for use in Microsoft Virtual PC or Microsoft Hyper-V virtual machines (VMs). Free Eazfuscator.NET Is a free obfuscator for .NET. The main purpose is to protect intellectual property of software. Free EQATEC Profiler Make your .NET app run faster. No source code changes are needed. Just point the profiler to your app, run the modified code, and get a visual report. COST Expression Studio 3/4 Comes with Web, Blend, Sketch Flow and more. You can create websites, produce beautiful XAML and more. COST/Trial Expresso The award-winning Expresso editor is equally suitable as a teaching tool for the beginning user of regular expressions or as a full-featured development environment for the experienced programmer or web designer with an extensive knowledge of regular expressions. Free Fiddler Fiddler is a web debugging proxy which logs all HTTP(s) traffic between your computer and the internet. Free Firebug Powerful Web development tool. If you build websites, you will need this. Free FxCop FxCop is an application that analyzes managed code assemblies (code that targets the .NET Framework common language runtime) and reports information about the assemblies, such as possible design, localization, performance, and security improvements. Free GAC Browser and Remover Easy way to remove multiple assemblies from the GAC. Assemblies registered by programs like Install Shield can also be removed. Free GAC Util The Global Assembly Cache tool allows you to view and manipulate the contents of the global assembly cache and download cache. Free HelpScribble Help Scribble is a full-featured, easy-to-use help authoring tool for creating help files from start to finish. You can create Win Help (.hlp) files, HTML Help (.chm) files, a printed manual and online documentation (on a web site) all from the same Help Scribble project. COST/Trial IETester IETester is a free Web Browser that allows you to have the rendering and JavaScript engines of IE9 preview, IE8, IE7 IE 6 and IE5.5 on Windows 7, Vista and XP, as well as the installed IE in the same process. Free iTextSharp iText# (iTextSharp) is a port of the iText open source java library for PDF generation written entirely in C# for the .NET platform. Use the iText mailing list to get support. Free Kaxaml Kaxaml is a lightweight XAML editor that gives you a "split view" so you can see both your XAML and your rendered content. Free LINQPad LinqPad lets you interactively query databases in a LINQ. Free Linquer Many programmers are familiar with SQL and will need a help in the transition to LINQ. Sometimes there are complicated queries to be written and Linqer can help by converting SQL scripts to LINQ. COST/Trial LiquidXML Liquid XML Studio 2010 is an advanced XML developers toolkit and IDE, containing all the tools needed for designing and developing XML schema and applications. COST/Trial Log4Net log4net is a tool to help the programmer output log statements to a variety of output targets. log4net is a port of the excellent log4j framework to the .NET runtime. We have kept the framework similar in spirit to the original log4j while taking advantage of new features in the .NET runtime. For more information on log4net see the features document. Free Microsoft Web Platform Installer The Microsoft Web Platform Installer 2.0 (Web PI) is a free tool that makes getting the latest components of the Microsoft Web Platform, including Internet Information Services (IIS), SQL Server Express, .NET Framework and Visual Web Developer easy. Free Mono Development Don't have Visual Studio - no problem! This is an open Source C# and .NET development environment for Linux, Windows, and Mac OS X Free Net Mass Downloader While it’s great that Microsoft has released the .NET Reference Source Code, you can only get it one file at a time while you’re debugging. If you’d like to batch download it for reading or to populate the cache, you’d have to write a program that instantiated and called each method in the Framework Class Library. Fortunately, .NET Mass Downloader comes to the rescue! Free nMap Nmap ("Network Mapper") is a free and open source (license) utility for network exploration or security auditing. Many systems and network administrators also find it useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. Free NoScript (Firefox add-in) The NoScript Firefox extension provides extra protection for Firefox, Flock, Seamonkey and other Mozilla-based browsers: this free, open source add-on allows JavaScript, Java and Flash and other plug-ins to be executed only by trusted web sites of your choice (e.g. your online bank), and provides the most powerful Anti-XSS protection available in a browser. Free NotePad 2 Notepad2, a fast and light-weight Notepad-like text editor with syntax highlighting. This program can be run out of the box without installation, and does not touch your system's registry. Free PageSpy PageSpy is a small add-on for Internet Explorer that allows you to select any element within a webpage, select an option in the context menu, and view detailed information about both the coding behind the page and the element you selected. Free Phrase Express PhraseExpress manages your frequently used text snippets in customizable categories for quick access. Free PowerGui PowerGui is a free community for PowerGUI, a graphical user interface and script editor for Microsoft Windows PowerShell! Free Powershell Comes with Win7, but you can automate tasks by using the .NET Framework. Great for network admins. Free Process Explorer Ever wondered which program has a particular file or directory open? Now you can find out. Process Explorer shows you information about which handles and DLLs processes have opened or loaded. Also, included in the SysInterals Suite. Free Process Monitor Process Monitor is an advanced monitoring tool for Windows that shows real-time file system, Registry and process/thread activity. Free Reflector Explore and analyze compiled .NET assemblies, viewing them in C#, Visual Basic, and IL. This is an Essential for any .NET developer. Free Regular Expression Library Stuck on a Regular Expression but you think someone has already figured it out? Chances are they have. Free Regulator Regulator makes Regular Expressions easy. This is a must have for a .NET Developer. Free RenameMaestro RenameMaestro is probably the easiest batch file renamer you'll find to instantly rename multiple files COST ReSharper The one program that I cannot live without. Supports VS2010 and offers simple refactoring, code analysis/assistance/cleanup/templates. One of the few applications that is worth the $$$. COST/Trial ScrewTurn Wiki ScrewTurn Wiki allows you to create, manage and share wikis. A wiki is a collaboratively-edited, information-centered website: the most famous is Wikipedia. Free SharpDevelop What is #develop? SharpDevelop is a free IDE for C# and VB.NET projects on Microsoft's .NET platform. Free Show Me The Template Show Me The Template is a tool for exploring the templates, be their data, control or items panel, that comes with the controls built into WPF for all 6 themes. Free SnippetCompiler Compiles code snippets without opening Visual Studio. It does not support .NET 4. Free SQL Prompt SQL Prompt is a plug-in that increases how fast you can work with SQL. It provides code-completion for SQL server, reformatting, db schema information and snippets. Awesome! COST/Trial SQLinForm SQLinForm is an automatic SQL code formatter for all major databases including ORACLE, SQL Server, DB2, UDB, Sybase, Informix, PostgreSQL, Teradata, MySQL, MS Access etc. with over 70 formatting options. COST/OnlineFree SSMS Tools SSMS Tools Pack is an add-in for Microsoft SQL Server Management Studio (SSMS) including SSMS Express. Free Storm STORM is a free and open source tool for testing web services. Free Telerik Code Convertor Convert code from VB to C Sharp and Vice Versa. Free TurtoiseSVN TortoiseSVN is a really easy to use Revision control / version control / source control software for Windows.Since it's not an integration for a specific IDE you can use it with whatever development tools you like. Free UltraEdit UltraEdit is the ideal text, HTML and hex editor, and an advanced PHP, Perl, Java and JavaScript editor for programmers. UltraEdit is also an XML editor including a tree-style XML parser. An industry-award winner, UltraEdit supports disk-based 64-bit file handling (standard) on 32-bit Windows platforms (Windows 2000 and later). COST/Trial Virtual Windows XP Comes with some W7 version and allows you to run WinXP along side W7. Free VirtualBox Virtualization by Sun Microsystems. You can virtualize Windows, Linux and more. Free Visual Log Parser SQL queries against a variety of log files and other system data sources. Free WinMerge WinMerge is an Open Source differencing and merging tool for Windows. WinMerge can compare both folders and files, presenting differences in a visual text format that is easy to understand and handle. Free Wireshark Wireshark is one of the best network protocol analyzer's for Unix and windows. This has been used several times to get me out of a bind. Free XML Notepad 07 Old, but still one of my favorite XML viewers. Free Productivity Tools – This is the list of tools that I use to save time or quickly navigate around Windows. Name Description License AutoHotKey Automate almost anything by sending keystrokes and mouse clicks. You can write a mouse or keyboard macro by hand or use the macro recorder. Free CLCL CLCL is clipboard caching utility. Free Ditto Ditto is an extension to the standard windows clipboard. It saves each item placed on the clipboard allowing you access to any of those items at a later time. Ditto allows you to save any type of information that can be put on the clipboard, text, images, html, custom formats, ..... Free Evernote Remember everything from notes to photos. It will synch between computers/devices. Free InfoRapid Inforapid is a search tool that will display all you search results in a html like browser. If you click on a word in that browser, it will start another search to the word you clicked on. Handy if you want to trackback something to it's true origin. The word you looked for will be highlighted in red. Clicking on the red word will open the containing file in a text based viewer. Clicking on any word in the opened document will start another search on that word. Free KatMouse The prime purpose of the KatMouse utility is to enhance the functionality of mice with a scroll wheel, offering 'universal' scrolling: moving the mouse wheel will scroll the window directly beneath the mouse cursor (not the one with the keyboard focus, which is default on Windows OSes). This is a major increase in the usefulness of the mouse wheel. Free ScreenR Instant Screencast with nothing to download. Works with Mac or PC and free. Free Start++ Start++ is an enhancement for the Start Menu in Windows Vista. It also extends the Run box and the command-line with customizable commands. For example, typing "w Windows Vista" will take you to the Windows Vista page on Wikipedia! Free Synergy Synergy lets you easily share a single mouse and keyboard between multiple computers with different operating systems, each with its own display, without special hardware. It's intended for users with multiple computers on their desk since each system uses its own monitor(s). Free Texter Texter lets you define text substitution hot strings that, when triggered, will replace hotstring with a larger piece of text. By entering your most commonly-typed snippets of text into Texter, you can save countless keystrokes in the course of the day. Free Total Commander File handling, FTP, Archive handling and much more. Even works with Win3.11. COST/Trial Available Wizmouse WizMouse is a mouse enhancement utility that makes your mouse wheel work on the window currently under the mouse pointer, instead of the currently focused window. This means you no longer have to click on a window before being able to scroll it with the mouse wheel. This is a far more comfortable and practical way to make use of the mouse wheel. Free Xmarks Bookmark sync and search between computers. Free General Utilities – This is a list for power user users or anyone that wants more out of Windows. I usually install a majority of these whenever I get a new system. Name Description License µTorrent µTorrent is a lightweight and efficient BitTorrent client for Windows or Mac with many features. I use this for downloading LEGAL media. Free Audacity Audacity® is free, open source software for recording and editing sounds. It is available for Mac OS X, Microsoft Windows, GNU/Linux, and other operating systems. Learn more about Audacity... Also check our Wiki and Forum for more information. Free AVast Free FREE Antivirus. Free CD Burner XP Pro CDBurnerXP is a free application to burn CDs and DVDs, including Blu-Ray and HD-DVDs. It also includes the feature to burn and create ISOs, as well as a multilanguage interface. Free CDEX You can extract digital audio CDs into mp3/wav. Free Combofix Combofix is a freeware (a legitimate spyware remover created by sUBs), Combofix was designed to scan a computer for known malware, spyware (SurfSideKick, QooLogic, and Look2Me as well as any other combination of the mentioned spyware applications) and remove them. Free Cpu-Z Provides information about some of the main devices of your system. Free Cropper Cropper is a screen capture utility written in C#. It makes it fast and easy to grab parts of your screen. Use it to easily crop out sections of vector graphic files such as Fireworks without having to flatten the files or open in a new editor. Use it to easily capture parts of a web site, including text and images. It's also great for writing documentation that needs images of your application or web site. Free DropBox Drag and Drop files to sync between computers. Free DVD-Fab Converts/Copies DVDs/Blu-Ray to different formats. (like mp4, mkv, avi) COST/Trial Available FastStone Capture FastStone Capture is a powerful, lightweight, yet full-featured screen capture tool that allows you to easily capture and annotate anything on the screen including windows, objects, menus, full screen, rectangular/freehand regions and even scrolling windows/web pages. Free ffdshow FFDShow is a DirectShow decoding filter for decompressing DivX, XviD, H.264, FLV1, WMV, MPEG-1 and MPEG-2, MPEG-4 movies. Free Filezilla FileZilla Client is a fast and reliable cross-platform FTP, FTPS and SFTP client with lots of useful features and an intuitive graphical user interface. You can also download a server version. Free FireFox Web Browser, do you really need an explanation? Free FireGestures A customizable mouse gestures extension which enables you to execute various commands and user scripts with five types of gestures. Free FoxIt Reader Light weight PDF viewer. You should install this with the advanced setting or it will install a toolbar and setup some shortcuts. Free gSynchIt Synch Gmail and Outlook. Even supports Outlook 2010 32/64 bit COST/Trial Available Hulu Desktop At home or in a hotel, this has replaced my cable/satellite subscription. Free ImgBurn ImgBurn is a lightweight CD / DVD / HD DVD / Blu-ray burning application that everyone should have in their toolkit! Free Infrarecorder InfraRecorder is a free CD/DVD burning solution for Microsoft Windows. It offers a wide range of powerful features; all through an easy to use application interface and Windows Explorer integration. Free KeePass KeePass is a free open source password manager, which helps you to manage your passwords in a secure way. Free LastPass Another password management, synchronize between browsers, automatic form filling and more. Free Live Essentials One download and lots of programs including Mail, Live Writer, Movie Maker and more! Free Monitores MonitorES is a small windows utility that helps you to turnoff monitor display when you lock down your machine.Also when you lock your machine, it will pause all your running media programs & set your IM status message to "Away" / Custom message(via options) and restore it back to normal when you back. Free mRemote mRemote is a full-featured, multi-tab remote connections manager. Free Open Office OpenOffice.org 3 is the leading open-source office software suite for word processing, spreadsheets, presentations, graphics, databases and more. It is available in many languages and works on all common computers. It stores all your data in an international open standard format and can also read and write files from other common office software packages. It can be downloaded and used completely free of charge for any purpose. Free Paint.NET Simple, intuitive, and innovative user interface for editing photos. Free Picasa Picasa is free photo editing software from Google that makes your pictures look great. Free Pidgin Pidgin is an easy to use and free chat client used by millions. Connect to AIM, MSN, Yahoo, and more chat networks all at once. Free PING PING is a live Linux ISO, based on the excellent Linux From Scratch (LFS) documentation. It can be burnt on a CD and booted, or integrated into a PXE / RIS environment. Free Putty PuTTY is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. Free Revo Uninstaller Revo Uninstaller Pro helps you to uninstall software and remove unwanted programs installed on your computer easily! Even if you have problems uninstalling and cannot uninstall them from "Windows Add or Remove Programs" control panel applet.Revo Uninstaller is a much faster and more powerful alternative to "Windows Add or Remove Programs" applet! It has very powerful features to uninstall and remove programs. Free Security Essentials Microsoft Security Essentials is a new, free consumer anti-malware solution for your computer. Free SetupVirtualCloneDrive Virtual CloneDrive works and behaves just like a physical CD/DVD drive, however it exists only virtually. Point to the .ISO file and it appears in Windows Explorer as a Drive. Free Shark 007 Codec Pack Play just about any file format with this download. Also includes my W7 Media Playlist Generator. Free Snagit 9 Screen Capture on steroids. Add arrows, captions, etc to any screenshot. COST/Trial Available SysinternalsSuite Go ahead and download the entire sys internals suite. I have mentioned multiple programs in this suite already. Free TeraCopy TeraCopy is a compact program designed to copy and move files at the maximum possible speed, providing the user with a lot of features. Free for Home TrueCrypt Free open-source disk encryption software for Windows 7/Vista/XP, Mac OS X, and Linux Free TweetDeck Fully featured Twitter client. Free UltraVNC UltraVNC is a powerful, easy to use and free software that can display the screen of another computer (via internet or network) on your own screen. The program allows you to use your mouse and keyboard to control the other PC remotely. It means that you can work on a remote computer, as if you were sitting in front of it, right from your current location. Free Unlocker Unlocks locked files. Pretty simple right? Free VLC Media Player VLC media player is a highly portable multimedia player and multimedia framework capable of reading most audio and video formats Free Windows 7 Media Playlist This program is special to my heart because I wrote it. It has been mentioned on podcast and various websites. It allows you to quickly create wvx video playlist for Windows Media Center. Free WinRAR WinRAR is a powerful archive manager. It can backup your data and reduce the size of email attachments, decompress RAR, ZIP and other files downloaded from Internet and create new archives in RAR and ZIP file format. COST/Trial Available Blogging – I use the following for my blog. Name Description License Insert Code for Windows Live Writer Insert Code for Windows Live Writer will format a snippet of text in a number of programming languages such as C#, HTML, MSH, JavaScript, Visual Basic and TSQL. Free LiveWriter Included in Live Essentials, but the ultimate in Windows Blogging Free PasteAsVSCode Plug-in for Windows Live Writer that pastes clipboard content as Visual Studio code. Preserves syntax highlighting, indentation and background color. Converts RTF, outputted by Visual Studio, into HTML. Free Desktop Management – The list below represent the best in Windows Desktop Management. Name Description License 7 Stacks Allows users to have "stacks" of icons in their taskbar. Free Executor Executor is a multi purpose launcher and a more advanced and customizable version of windows run. Free Fences Fences is a program that helps you organize your desktop and can hide your icons when they are not in use. Free RocketDock Rocket Dock is a smoothly animated, alpha blended application launcher. It provides a nice clean interface to drop shortcuts on for easy access and organization. With each item completely customizable there is no end to what you can add and launch from the dock. Free WindowsTab Tabbing is an essential feature of modern web browsers. Window Tabs brings the productivity of tabbed window management to all of your desktop applications. Free

Read the article

Silverlight Cream for March 22, 2010 -- #817

- by Dave Campbell

In this Issue: Bart Czernicki, Tim Greenfield, Andrea Boschin(-2-), AfricanGeek, Fredrik Normén, Ian Griffiths, Christian Schormann, Pete Brown, Jeff Handley, Brad Abrams, and Tim Heuer. Shoutout: At the beginning of MIX10, Brad Abrams reported Silverlight 4 and RIA Services Release Candidate Available NOW From SilverlightCream.com: Using the Bing Maps Silverlight control on the Windows Phone 7 Bart Czernicki has a very cool BingMaps and WP7 tutorial up... you're going to want to bookmark this one for sure! Code included and external links... thanks Bart! Silverlight Rx DataClient within MVVM Tim Greenfield has a great post up about Rx and MVVM with Silverlight 3. Lots of good insight into Rx and interesting code bits. SilverVNC - a VNC Viewer with Silverlight 4.0 RC Andrea Boschin digs into Silverlight 4 RC and it's full-trust on sockets and builds an implementation of RFB protocol... give it a try and give Andrea some feedback. Chromeless Window for OOB applications in Silverlight 4.0 RC Andrea Boschin also has a post up on investigating the OOB no-chrome features in SL4RC. Windows Phone 7 and WCF AfricanGeek has his latest video tutorial up and it's on WCF and WP7... I've got a feeling we're all going to have to get our arms around this. Some steps for moving WCF RIA Services Preveiw to the RC version Fredrik Normén details his steps in transitioning to the RC version of RIA Services. Silverlight Business Apps: Module 8.5 - The Value of MEF with Silverlight Ian Griffiths has a video tutorial up at Channel 9 on MEF and Silverlight, posted by John Papa Introducing Blend 4 – For Silverlight, WPF and Windows Phone Christian Schormann has an early MIX10 post up about te new features in Expression Blend with regard to Silverlight, WPF, and WP7. Building your first Silverlight for Windows Phone Application Pete Brown has his first post up on building a WP7 app with the MIX10 bits. Lookups in DataGrid and DataForm with RIA Services Jeff Handley elaborates on a post by someone else about using lookup data in the DataGrid and DataForm with RIA Services Silverlight 4 + RIA Services - Ready for Business: Starting a New Project with the Business Application Template Brad Abrams is starting a series highlighting the key features of Silverlight 4 and RIA with the new releases. He has a post up Silverlight 4 + RIA Services - Ready for Business: Index, including links and source. Then in this first post of the series, he introduces the Business Application Template. Custom Window Chrome and Events Watch a tutorial video by Tim Heuer on creating custom chrome for OOB apps. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Silverlight Cream for April 03, 2010 -- #829

- by Dave Campbell

In this Issue: Scott Marlowe, Nokola, SilverLaw, Brad Abrams, Jeff Wilcox, Jesse Liberty, Alexey Zakharov, ondrejsv, Ward Bell, and David Anson. Shoutouts: Bart Czernicki has a post up about the latest with HTML5: HTML 5 is Born Old - Quake in HTML 5 I was sent a link to shoebox360 a while back and had to sign up to see the Silverlight use, but it does work very nice. I like the panoramic carousel in the viewer: shoebox360 Jeff Handley has a post up on RIA Services - Documentation Guidance and Community Samples... the team is looking for feedback from all of us Shawn Wildermuth posted his My MIX Talks' Source Code Laurent Bugnion posted his Sample code and slides for my TechDays10 (Belgium) talks From SilverlightCream.com: Silverlight to WCF Cross Domain SecurityException Scott Marlowe wrote an article about an often-encountered security exception having to do with cross-domain policies. He details the problem, the response, the solution, and yet another problem/solution associated... good stuff, Scott! Simple Functions for HTML Interop You've seen Nokola's graphic work... how about some HTML Interop from him? He's exposing the code he uses in his work. New Video: ChildWindow Styling - Silverlight 3 SilverLaw has a new video tutorial on Silerlight 3 ChildWindow Styling up - in German - but the video is language-agnostic :) Silverlight 4 + RIA Services - Ready for Business: Exposing WCF (SOAP\WSDL) Services Brad Abrams' continuation in his RIA series is this one demonstrating exposing RIA Services as a Soap\WSDL service Silverlight 4: New parser implementation. New parser features. Jeff Wilcox has a post up highlighting some of the new features in Silverlight 4 such as a new parser implementation with new XAML features. New Video Series – Getting Started With Silverlight Jesse Liberty is starting a new video tutorial series that's going to build out to be a "complete survey of Silverlight programming". The first two are in this post and are Getting Started and Adding Controls to a Silverlight App... looks like good material, Jesse, and all the source is there for the taking as well. Silverlight layout hack: Centered content with fixed maxwidth Alexey Zakharov has a quick tip up on creating centered content with fixed maxwidth. He calls it a dirty trick... looks like code to me :) Silverlight DataForm’s autogenerated fields send empty strings to database ondrejsv points up a problem he had with the Toolkit's DataForm, and his solution to it... with code for all of us following along behind :) DevForce Extensibility With MEF InheritedExport Ward Bell has a post up describing how they got DevForce MEF'd up, and looks like a good post to get you all excited about MEF as well... lots of external links and good info. Tip: Read-only custom DependencyProperties don't exist in Silverlight, but can be closely approximated David Anson's latest Tip is about Read-only custom DependencyProperties in Silverlight -- which strictly is not possible, but he has a code example up that gets close. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Creating a bare bone web-browser: After the html parser, javascript parser, etc have done their work, how do I display the content of the webpage?

- by aste123

This is a personal project to learn computer programming. I took a look at this: https://www.udacity.com/course/viewer#!/c-cs262 The following is the approach taken in it: Abstract Syntax Tree is created. But javascript is still not completely broken down in order not to confuse with the html tags. Then the javascript interpreter is called on it. Javascript interpreter stores the text from the write() and document.write() to be used later. Then a graphics library in Python is called which will convert everything to a pdf file and then we convert it into png or jpeg and then display it. My Question: I want to display the actual text in a window (which I will design later) like firefox or chrome does instead of image files so that the data can be selected, copied, etc by the user of the browser. How do I accomplish this? In other words, what are the other elements of a bare bone web browser that I am missing? I would prefer to implement most of the stuff in C++ although if things seem too complicated I might go with Python to save time and create a prototype and later creating another bare bone browser in C++ and add more features. This is a project to learn more. I do realize we already have lots of reliable browsers like firefox, etc. The way I feel it is done: I think after all the broken down contents have been created by the parsers and interpreters, I will need to access them individually from within the window's code (like qt) and then decide upon a good way to display them. I am not sure if it is the way this should be done. Additions after useful comment by Kilian Foth: I found this page: http://friendlybit.com/css/rendering-a-web-page-step-by-step/ 14. A DOM tree is built out of the broken HTML 15. New requests are made to the server for each new resource that is found in the HTML source (typically images, style sheets, and JavaScript files). Go back to step 3 and repeat for each resource. 16. Stylesheets are parsed, and the rendering information in each gets attached to the matching node in the DOM tree 17. Javascript is parsed and executed, and DOM nodes are moved and style information is updated accordingly 18. The browser renders the page on the screen according to the DOM tree and the style information for each node 19. You see the page on the screen I need help with step 18. How do I do that? How much work do Webkit and Gecko do? I want to use a readymade layout renderer for step number 18 and not for anything that comes before that.

Read the article

Using a WCF Message Inspector to extend AppFabric Monitoring

- by Shawn Cicoria

I read through Ron Jacobs post on Monitoring WCF Data Services with AppFabric http://blogs.msdn.com/b/endpoint/archive/2010/06/09/tracking-wcf-data-services-with-windows-server-appfabric.aspx What is immediately striking are 2 things – it’s so easy to get monitoring data into a viewer (AppFabric Dashboard) w/ very little work. And the 2nd thing is, why can’t this be a WCF message inspector on the dispatch side. So, I took the base class WCFUserEventProvider that’s located in the WCF/WF samples [1] in the following path, \WF_WCF_Samples\WCF\Basic\Management\AnalyticTraceExtensibility\CS\WCFAnalyticTracingExtensibility\ and then created a few classes that project the injection as a IEndPointBehavior There are just 3 classes to drive injection of the inspector at runtime via config: IDispatchMessageInspector implementation BehaviorExtensionElement implementation IEndpointBehavior implementation The full source code is below with a link to the solution file here: [Solution File] using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.ServiceModel.Dispatcher; using System.ServiceModel.Channels; using System.ServiceModel; using System.ServiceModel.Configuration; using System.ServiceModel.Description; using Microsoft.Samples.WCFAnalyticTracingExtensibility; namespace Fabrikam.Services { public class AppFabricE2EInspector : IDispatchMessageInspector { static WCFUserEventProvider evntProvider = null; static AppFabricE2EInspector() { evntProvider = new WCFUserEventProvider(); } public object AfterReceiveRequest( ref Message request, IClientChannel channel, InstanceContext instanceContext) { OperationContext ctx = OperationContext.Current; var opName = ctx.IncomingMessageHeaders.Action; evntProvider.WriteInformationEvent("start", string.Format("operation: {0} at address {1}", opName, ctx.EndpointDispatcher.EndpointAddress)); return null; } public void BeforeSendReply(ref System.ServiceModel.Channels.Message reply, object correlationState) { OperationContext ctx = OperationContext.Current; var opName = ctx.IncomingMessageHeaders.Action; evntProvider.WriteInformationEvent("end", string.Format("operation: {0} at address {1}", opName, ctx.EndpointDispatcher.EndpointAddress)); } } public class AppFabricE2EBehaviorElement : BehaviorExtensionElement { #region BehaviorExtensionElement /// <summary> /// Gets the type of behavior. /// </summary> /// <value></value> /// <returns>The type that implements the end point behavior<see cref="T:System.Type"/>.</returns> public override Type BehaviorType { get { return typeof(AppFabricE2EEndpointBehavior); } } /// <summary> /// Creates a behavior extension based on the current configuration settings. /// </summary> /// <returns>The behavior extension.</returns> protected override object CreateBehavior() { return new AppFabricE2EEndpointBehavior(); } #endregion BehaviorExtensionElement } public class AppFabricE2EEndpointBehavior : IEndpointBehavior //, IServiceBehavior { #region IEndpointBehavior public void AddBindingParameters(ServiceEndpoint endpoint, BindingParameterCollection bindingParameters) {} public void ApplyClientBehavior(ServiceEndpoint endpoint, ClientRuntime clientRuntime) { throw new NotImplementedException(); } public void ApplyDispatchBehavior(ServiceEndpoint endpoint, EndpointDispatcher endpointDispatcher) { endpointDispatcher.DispatchRuntime.MessageInspectors.Add(new AppFabricE2EInspector()); } public void Validate(ServiceEndpoint endpoint) { ; } #endregion IEndpointBehavior } } [1] http://www.microsoft.com/downloads/details.aspx?FamilyID=35ec8682-d5fd-4bc3-a51a-d8ad115a8792&displaylang=en

Read the article

Add Transitions to Slideshows in PowerPoint 2010

- by DigitalGeekery

Sitting through PowerPoint presentation can sometimes get a little boring. You can make your slideshows more interesting by adding transitions between the slides in your presentations. Transitions certainly aren’t new to PowerPoint, but Office 2010 adds a number of exciting new transitions and options. Add Transitions Select the slide to which you want to apply a transition. On the Transitions tab, select the More button to reveal the all transition options in the gallery. Select the transition you’d like to apply to your slide. The transitions are divided into three types…Subtle, Exciting, and Dynamic Content. You can hover your mouse over each item in the gallery to preview the transition with Live Preview. You can adjust many of the transitions using Effect Options. The options will vary depending on which transition you’ve selected. You can add additional customizations in the Timing Group. You can add sound by selecting one of the options in the Sound dropdown list… You can change the duration of the transition… Or choose to advance the slide On Mouse Click (default) or automatically after a certain period of time. If you’d like to apply one transition to every slide in your presentation, select the Apply To All button. You can preview your transition by clicking the Preview button on the Transitions tab. A few clicks is all it takes to add a little energy and excitement to an otherwise dry presentation. Are you looking for more ways to spice up your PowerPoint 2010 slideshows? You could try adding animation to text and images, or adding video from the web. Similar Articles Productive Geek Tips Insert Tables Into PowerPoint 2007Bring Office 2003 Menus Back to 2010 with UBitMenuEmbed True Type Fonts in Word and PowerPoint 2007 DocumentsHow to Add Video from the Web in PowerPoint 2010Add Artistic Effects to Your Pictures in Office 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide

Read the article

Gain Quick Access to the Cache in Firefox

- by Asian Angel

Are you looking for a quick and simple way to view the contents of the cache in Firefox? Then you will definitely want to see how easy it can be using the CacheViewer extension. Note: CacheViewer is a front-end app for easily accessing and searching the memory cache. Before Viewing the cache in Firefox using “about:cache” provides some information about the contents but may not be the most efficient method available for some people. CacheViewer in Action Once you have installed the extension there are three easy ways to access your new cache viewer. The first is using the “CacheViewer Command” available in the “Tools Menu” and the second is using the keyboard shortcut “Ctrl + Shift + C”. The third way is by adding a “Toolbar Button” to your browser’s UI. All three work equally well…choose the method that best suits your personal needs. When you access the “CacheViewer Window” this is what it will look like. You may decide to resize it and move (or hide) some of the columns for the best viewing. You can easily scroll through the cache contents and preview images if desired as shown here. If you keep the “CacheViewer Window” open you can refresh it as you browse using the “Refresh Button” in the lower right corner. This is a nice, quick, and very simple way to access the cache on demand and save items to your hard-drive if desired. Note: The “CacheViewer” can also be set to open in a new tab instead (see “Options”). Options Choose whether “CacheViewer” opens in a separate window (default) or in a new tab. Conclusion If you want a quick and simple way to view the cache in Firefox then the CacheViewer extension is just what you have been looking for. Link Download the CacheViewer extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Add a Cache Clearing Button to FirefoxSearch for Install Packages from the Ubuntu Command LineQuick Tip: Empty Internet Explorer 7 Cache when Browser is ClosedView Internet Explorer Cache Files the Easy WayQuick Hits: 11 Firefox Tab How-Tos TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) If it were only this easy Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook

Read the article

How to Assign a Static IP to an Ubuntu 10.04 Desktop Computer

- by Mysticgeek

If you have a home network with several computers, assigning them static IP addresses can make troubleshooting easier. Today we take a look at switching from DHCP to a static IP in Ubuntu. Assign a Static IP Using Static IPs prevents address conflicts between machines and can allow easier access to them. If you have a small home network and are satisfied with the machines getting their IP address automatically via DHCP, there won’t be anything gained by using static addresses. Using Static IPs isn’t necessarily for the average user, but if you’re a geek who wants to know the address assigned to each machine, it can allow for faster troubleshooting. To change your Ubuntu machine to a Static IP go to System \ Preferences \ Network Connections. In our example, we’re on a wired system so click on the Wired tab, then select Auto eth0 and click on Edit. Select the IPv4 settings tab, change Method to Manual, click the Add button. Then type in the Static IP Address, Subnet Mask, DNS Servers, and Default Gateway. Then click Apply when you’re finished. Make sure to hit Enter after typing in the Default Gateway otherwise it will revert back to 0.0.0.0 You’ll need to enter in your admin password before the changes go into affect. To verify the changes have been made successfully launch a Terminal session and type in ifconfig at the command prompt, or follow these directions. You also might want to ping the address from another machine to make sure everything is communicating. If you want to assign a Static IP to your Windows machines, check out our article on how to assign a Static IP on Windows systems (make sure to browse the comments as our readers have some good suggestions). Whether you have a small office or home network set up with a server and several machines, using a Static IP on each device can help you manage them easily. Again, it isn’t for everyone as it really depends on how your network is setup and the way you use it. Similar Articles Productive Geek Tips Change Ubuntu Desktop from DHCP to a Static IP AddressAllow Remote Control To Your Desktop On UbuntuAssign Custom Shortcut Keys on Ubuntu LinuxKeyboard Ninja: 21 Keyboard Shortcut ArticlesChange Ubuntu Server from DHCP to a Static IP Address TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries

Read the article

Add Global Hotkeys to Windows Media Player

- by DigitalGeekery

Do you use Windows Media Player in the background while working in other applications? The WMP Keys plug-in for Media Player adds global keyboard shortcuts that allow you to control Media Player even when it isn’t in focus. Windows Media Player has a slew of keyboard shortcuts that work only when the media player is active, but these shortcuts stop working once WMP is no longer in focus or minimized. WMP Keys add the following default global hotkeys for Windows Media Player 10, 11, and 12. Ctrl+Alt+Home – Play / Pause Ctrl+Alt+Right – Next track Ctrl+Alt+Left – Previous track Ctrl+Alt+Up Arrow Key – Volume Up Ctrl+Alt+Down Arrow Key – Volume Down Ctrl+Alt+F – Fast Forward Ctrl+Alt+B – Fast Backward Ctrl+Alt+[1-5] – Rate 1-5 stars Note: Tapping Ctrl+Alt+F and Ctrl+Alt+B will skip ahead or back in 5 second intervals. Close out of Windows Media Player and then download and install WMP Keys (link below). After you’ve installed WMP Keys, you’ll need to enable it. Select Organize and then Options… In the Options window, select the Plug-ins tab, click Background in the Category window, then check the box for Wmpkeys Plugin. Click OK to save and exit. You can also enable the plug-in by selecting Tools > Plug-ins and clicking Wmpkeys Plugin. You to view and edit the global hotkeys in the WMPKeys settings window. Select Tools > Plug-in properties and click Wmpkeys Plugin. Below you can see all the default WMP Keys shortcuts. To change any of the shortcuts, select the text box then press the new keyboard shortcut. Click OK when finished. WMP Keys is very simple little plug-in that makes using WMP while you’re multitasking just a little bit easier and more efficient. Looking for more plugins for Windows Media Player? Check out our previous articles on adding new features with Media Player Plus, and displaying song lyrics with Lyrics Plugin. Download WMP Keys Similar Articles Productive Geek Tips Built-in Quick Launch Hotkeys in Windows VistaFixing When Windows Media Player Library Won’t Let You Add FilesKantaris is a Unique Media Player Based on VLCInstall and Use the VLC Media Player on Ubuntu LinuxAssign Keyboard Media Keys to Work in Winamp TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter

Read the article

What’s new in VS.10 & TFS.10?

- by johndoucette

Getting my geek on… I have decided to call the products VS.10 (Visual Studio 2010), TP.10 (Test Professional 2010), and TFS.10 (Team Foundation Server 2010) Thanks Neno Loje. What's new in Visual Studio & Team Foundation Server 2010? Focusing on Visual Studio Team System (VSTS) ALM-related parts: Visual Studio Ultimate 2010 NEW: IntelliTrace® (aka the historical debugger) NEW: Architecture Tools New Project Type: Modeling Project UML Diagrams UML Use Case Diagram UML Class Diagram UML Sequence Diagram (supports reverse enginneering) UML Activity Diagram UML Component Diagram Layer Diagram (with Team Build integration for layer validation) Architecuture Explorer Dependency visualization DGML Web & Load Tests Visual Studio Premium 2010 NEW: Architecture Tools Read-only model viewer Development Tools Code Analysis New Rules like SQL Injection detection Rule Sets Code Profiler Multi-Tier Profiling JScript Profiling Profiling applications on virtual machines in sampling mode Code Metrics Test Tools Code Coverage NEW: Test Impact Analysis NEW: Coded UI Test Database Tools (DB schema versioning & deployment) Visual Studio Professional 2010 Debuger Mixed Mode Debugging for 64-bit Applications Export/Import of Breakpoints and data tips Visual Studio Test Professional 2010 Microsoft Test Manager (MTM, formerly known as "Camano")) Fast Forward Testing Visual Studio Team Foundation Server 2010 Work Item Tracking and Project Management New MSF templatesfor Agile and CMMI (V 5.0) Hierarchical Work Items Custom Work Item Link Types Ready to use Excel agile project management workbooks for managing your backlogs (including capacity planing) Convert Work Item query to an Excel report MS Excel integration Support for Work Item hierarchies Formatting is preserved after doing a 'Refresh' MS Project integration Hierarchy and successor/predecessor info is now synchronized NEW: Test Case Management Version Control Public Workspaces Branch & Merge Visualization Tracking of Changesets & Work Items Gated Check-In Team Build Build Controllers and Agents Workflow 4-based build process NEW: Lab Management (only a pre-release is avaiable at the moment!) Project Portal & Reporting Dashboards (on SharePoint Portal) Burndown Chart TFS Web Parts (to show data from TFS) Administration & Operations Topology enhancements Application tier network load balancing (NLB) SQL Server scale out Improved Sharepoint flexibility Report Server flexibility Zone support Kerberos support Separation of TFS and SQL administration Setup Separate install from configure Improved installation wizards Optional components Simplified account requirements Improved Reporting Services configuration Setup consolidation Upgrading from previous TFS versions Improved IIS flexibility Administration Consolidation of command line tools User rename support Project Collections Archive/restore individual project collections Move Team Project Collections Server consolidation Team Project Collection Split Team Project Collection Isolation Server request cancellation Licensing: TFS server license included in MSDN subscriptions Removed features (former features not part of Visual Studio 2010): Debug » Start With Application Verifier Object Test Bench IntelliSense for C++ / CLI Debugging support for SQL 2000

Read the article

Save Links for Later Reading in Firefox

- by Asian Angel

Do you want a simple way to save and manage links for reading later? The Save-To-Read extension for Firefox makes it easy to do without an account. Using Save-To-Read As soon as you install the extension you will notice two new additions to your UI. You will see a small plus sign in the address bar and a new toolbar button (opens and closes the sidebar shown here). Your bookmarks menu will also have a new folder entry. For our example we chose to save three pages for later reading. Each time you want to save a website click on the small plus sign, and it is automatically added to your read later list. Our second article… And finally the third article. Notice that the small plus sign has become a minus sign after adding the article to our list. Opening the sidebar shows our three entries waiting to be read. Checking the bookmarks menu shows the same articles available there. When you are ready to read your articles simply click on the link in the sidebar, bookmarks menu, etc. Notice that the entry is still available at the moment…there are no automatic deletions until you are finished with an article. This is great if you accidentally click the wrong link before you are ready for it. Removing an article from the list is as simple as clicking on the address bar minus sign. It will revert to a plus sign and the entry is no longer visible in your list. For those who want to avoid using a sidebar there is a different toolbar button available too. The alternate toolbar button provides access to a drop-down article list. Choose the access style that best suits your needs. Preferences The preferences are simple to work with and focus on appearance/ease-of-use. Conclusion If you have been looking for a simpler alternative to other “read later” extensions, then Save-To-Read could be just what you have been waiting for. Another cool option for reading posts later, even on eReaders, then check out our article on saving articles to read later with Instapaper. Links Download the Save-To-Read extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Save Pages for Later With Reading List Extension for FirefoxInstall Adobe PDF Reader on Ubuntu EdgyQuick Hits: 11 Firefox Tab How-TosSave Webpage Links & URLs as Files in FirefoxQuick Tip: Save Windows and Tabs When Restarting Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries

Read the article

Build Mobile App for E-Business Suite Using SOA Suite and ADF Mobile

- by Michelle Kimihira

With the upcoming release of Oracle ADF Mobile, I caught up with Srikant Subramaniam, Senior Principal Product Manager, Oracle Fusion Middleware post OpenWorld to learn about the cool hands-on lab at OpenWorld. For those of you who missed it, you will want to keep reading... Author: Srikant Subramaniam, Senior Principal Product Manager,Oracle Fusion Middleware Oracle ADF Mobile enables rapid and declarative development of native on-device mobile applications. These native applications provide a richer experience for smart devices users running Apple iOS or other mobile platforms. Oracle ADF Mobile protects Oracle customers from technology shifts by adopting a metadata-based development framework that enables developer to develop one app (using Oracle JDeveloper), and deploy to multiple device platforms (starting with iOS and Android). Oracle ADF Mobile also enables IT organizations to leverage existing expertise in web-based and Java development by adopting a hybrid application architecture that brings together HTML5, Java, and device native container: HTML5 allows developer to deliver device-native user experiences while maintaining portability across different platforms Java allows developers to create modules to support business logic and data services Native container provides integration into device services such as camera, contacts, etc All these technologies are packaged into a development framework that supports declarative application development through Oracle JDeveloper. ADF Mobile also provides out of box integratoin with key Fusion Middleware components, such as SOA Suite and Business Process Management (BPM). Oracle Fusion Middleware provides the necessary infrastructure to extend business processes and services to the mobile device -- enabling the mobile user to participate in human tasks – without the additional “mobile middleware” layer. When coupled with Oracle SOA Suite, this combination can execute business transactions on Oracle E-Business Suite (or any Oracle Application). Demo Use Case: Mobile E-Business Suite (iExpense) Approvals Using an employee expense approval scenario, we illustrate how to use Oracle Fusion Middleware and Oracle ADF Mobile to build application extensions that integrate intelligently with Oracle Applications (For example, E-Business Suite). Building these extensions using Oracle Fusion middleware and ADF makes modifications simple, quick to implement, and easy to maintain/upgrade. As described earlier, this approach also extends Fusion Middleware to mobile users without the additional "Mobile Middleware" layer. The approver is presented with a list of expense reports that have been submitted for approval. These expense reports are retrieved from the backend E-Business Suite and displayed on the mobile device. Approval (or rejection) of the expense report kicks off the workflow in E-Business Suite and takes it to completion. The demo also shows how to integrate with native device services such as email, contacts, BI dashboards as well as a prebuilt PDF viewer (this is especially useful in the expense approval scenario, as there is often a need for the approver to access the submitted receipts). Summary Oracle recommends Fusion Middleware as the application integration platform to deliver critical enterprise data and processes to mobile applications. Pre-built connectors between Fusion Middleware and Applications greatly accelerates the integration process. Instead of building individual integration points between mobile applications and individual enterprise applications, Oracle Fusion Middleware enables IT organizations to leverage a common platform to support both desktop and mobile application. Additional Information Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

Read the article

Install of AppFabric RC stops AppFabric Monitoring (some traps for young players)

- by Rob Addis

I uninstalled AppFabric Beta 2 and installed AppFabric RC. The AppFabricEventCollection Service is started (runs under Local Service which is a dbo_owner on the Monitoring Database to prove this wasn’t the issue). The SQLServerAgent Service is started. Nothing is being written to the Monitoring DB Staging Table and thus nothing is being written to the Event tables or seen in the AppFabric Dashboard. Nothing has been written to the following event logs - Microsoft-Windows-Application Server-System Services\Admin - Microsoft-Windows-Application Server-System Services\Operational The Microsoft-Windows-Application Server-System Services\Debug event log is not shown in the event viewer. The WCF configuration appears fine the connection string to the Monitoring DB is correct. Monitoring is set to “Trouble Shooting” and no errors are shown on the “Configure WCF and WF for Application” dialog. So the problem seems to lie with either AppFabric which writes to the event log or the AppFabricEventCollection Service. I thought I was flummoxed... However one of my colleagues said have you checked the etwProviderId? I was using a config which was created under AppFabric Beta 2 which had a different etwProviderId. So I deleted the following section and all other references to AppFabric monitoring from the web.config and then recreated them using IIS the “Configure WCF and WF for Application” dialog and set the level to TroubleShooting. <diagnostics etwProviderId="6b44a7ff-9db4-4723-b8cf-1b584bf1591b"> <endToEndTracing propagateActivity="true" messageFlowTracing="true" /> </diagnostics> I then called a service to create some log entries. Still nothing was written to the Monitoring DB Staging Table... I checked the Microsoft-Windows-Application Server-System Services\Admin event log. It had the following entry... Configuration error. Please see the details to correct the problem. \rDetailed information:\r Filename: \\?\C:\Users\xxx\Documents\dotnetdev\Frameworks\SOA\xxx.SOA.Framework\xxx.SOA.Framework.MockServices\SimpleServiceParent\web.config Error: Cannot read configuration file due to insufficient permissions System.UnauthorizedAccessException: Filename: \\?\C:\Users\xxx\Documents\dotnetdev\Frameworks\SOA\xxx.SOA.Framework\IAG.SOA.Framework.MockServices\SimpleServiceParent\web.config Error: Cannot read configuration file due to insufficient permissions And guess who the user was... Local Service yes yes I should have used a better User in the AppFabric RC setup to run the AppFabricEventCollection Service under! So I changed the user to a more appropriate one and removed Local Service as a DBO and hay presto!

Read the article

CodePlex Daily Summary for Saturday, October 29, 2011

CodePlex Daily Summary for Saturday, October 29, 2011Popular Releasespatterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Folder Bookmarks: Folder Bookmarks 2.2.0.1: In this version: Custom Icons - now you can change the icons of the bookmarks. By default, whenever an image is added, the icon is automatically changed to a thumbnail of the picture. This can be turned off in the settings (Options... > Settings) Ability to remove items from the 'Recent' category Bugfixes - 'Choose' button in 'Edit Bookmark' now works Another bug fix: another problem in the 'Edit Bookmark' windowMedia Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.Image Converter: Image Converter 0.3: New Features: - English and German support Technical Improvements: - Microsoft All Rules using Code Analysis Planned Features for future release: 1. Unit testing 2. Command line interface 3. Automatic UpdatesAcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6?? ??“????”...DotNetNuke® Events: 05.02.01: This release fixes any know bugs from any previous version. Events 05.02.01 will work for any DNN version 5.5.0 and up. Full details on the changes can be found at http://dnnevents.codeplex.com/workitem/list/basic Please review and rate this release... (stars are welcome)BUG FIXESAdded validation around category cookie RSS feed was missing an explicit close of the file when writing. Fixed. Added extra security into detail view .ICS Files did not include correct line folding. Fixed Cha...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.33: Add JSParser.ParseExpression method to parse JavaScript expressions rather than source-elements. Add -strict switch (CodeSettings.StrictMode) to force input code to ECMA5 Strict-mode (extra error-checking, "use strict" at top). Fixed bug when MinifyCode setting was set to false but RemoveUnneededCode was left it's default value of true.Path Copy Copy: 8.0: New version that mostly adds lots of requested features: 11340 11339 11338 11337 This version also features a more elaborate Settings UI that has several tabs. I tried to add some notes to better explain the use and purpose of the various options. The Path Copy Copy documentation is also on the way, both to explain how to develop custom plugins and to explain how to pre-configure options if you're a network admin. Stay tuned.MVC Controls Toolkit: Mvc Controls Toolkit 1.5.0: Added: The new Client Blocks feaure of Views A new "move" js method for the TreeViews The NewHtmlCreated js event to the DataGrid Improved the ChoiceList structure that now allows also the selection list of a dropdown to be chosen with a lambda expression Improved the AcceptViewHintAttribute controller filter. Now a client can specify not only the name of a View or Partial View it prefers, but also to receive just the rough data in Json format. Fixed: Issue with partial thrust Cl...Free SharePoint Master Pages: Buried Alive (Halloween) Theme: Release Notes *Created for Halloween, you will find theme file, custom css file and images. *Created by Al Roome @AlstarRoome Features: Custom styling for web part Custom background *Screenshot https://s3.amazonaws.com/kkhipple/post/sharepoint-showcase-halloween.pngDevForce Application Framework: DevForce AF 2.0.3 RTW: PrerequisitesWPF 4.0 Silverlight 4.0 DevForce 2010 6.1.3.1 Download ContentsDebug and Release Assemblies API Documentation Source code License.txt Requirements.txt Release HighlightsNew: EventAggregator event forwarding New: EntityManagerInterceptor<T> to intercept EntityManger events New: IHarnessAware to allow for ViewModel setup when executed inside of the Development Harness New: Improved design time stability New: Support for add-in development New: CoroutineFns.To...NicAudio: NicAudio 2.0.5: Minor change to accept special DTS stereo modes (LtRt, AB,...)NDepend TFS 2010 integration: version 0.5.0 beta 1: Only the activity and the VS plugin are avalaible right now. They basically work. Data types that are logged into tfs reports are subject to change. This is no big deal since data is not yet sent into the warehouse.Windows Azure Toolkit for Windows Phone: Windows Azure Toolkit for Windows Phone v1.3.1: Upgraded Windows Azure projects to Windows Azure Tools for Microsoft Visual Studio 2010 1.5 – September 2011 Upgraded the tools tools to support the Windows Phone Developer Tools RTW Update SQL Azure only scenarios to use ASP.NET Universal Providers (through the System.Web.Providers v1.0.1 NuGet package) Changed Shared Access Signature service interface to support more operations Refactored Blobs API to have a similar interface and usage to that provided by the Windows Azure SDK Stor...DotNetNuke® FAQ: 05.00.00: FAQ (Frequently Asked Questions) 05.00.00 will work for any DNN version 5.6.1 and up. It is the first version which is rewritten in C#. The scope of this update is to fix all known issues and improve user interface. Please review and rate this release... (stars are welcome)BUG FIXESManage Categories button text was not localized Edit/Add FAQ Entry: button text was not localized ENHANCEMENTSAdded an option to select the control for category display: Listbox with checkboxes (flat category ...SiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.0.921.340): Added CodePlex and PayPal links New iconNew ProjectsAsynk: Asynk is a framework/application that allows existing applications to easily be extended with an offloaded asynchronous worker layer. Asynk is developed using C#.Blob Tower Defense: 3D tower defense game for Windows Phone 7. School project for Brno University of Technology, computer graphics class.Booz: Booz is... An extended version of the boo shell (booish2 to be precise). Offers additional commands like cd, md, ls etc. I hope this shell can be used to take the position of/surpass the native windows shell in the near future.CIMS: a sanction infomation system for sencience and technology of hustCrystalDot - Icon Collection / Pack (LGPL): .Net / Mono freundliche Varainte der Crystal-Icons von Everaldo Icon collection / pack for .NET and Mono designed by Everaldo - KDE style http://www.everaldo.com/crystal/dotetes: dotetes adalah teka teki silang tool dikembangkan dengan bahasa c#Emoe': This Project is a Windows Phone 7.1 application.Equation Inversion: Visual Studion 2008 Add-in for equation inversions.Exploring VMR Features on WEC7: This is the sample application helps you to do alpha blending the bitmap on camera streaming in Windows Embedded Compact 7 using Directshow video Renderer (VMR). It is a VS2008 based smart device project developed on C++. I have explained the sample application in the following blog link. http://www.e-consystems.com/blog/windowsce/?p=759 EzValidation: Custom validation extensions for ASP.NET MVC 3. Includes server and client side model based validation attributes for: -- Equal To -- Not Equal To -- Greater Than -- Greater Than or Equal To -- Less Than -- Less Than or Equal To Supports validating against: -- Another Model Field -- A Specific Value -- Current Date/Yesterday/Tomorrow (for Dates and Strings) Download & Install via NuGet "package-install ezvalidation"Flu.net: Flu.net is a tool that helps you creating your own fluent syntax for .NET Framework applications in a declarative fashion. It is aimed for infrastructures and other open-source projects use.For Chess Endgames: King vs. King Opposition Calculator: You must input the locations of 2 kings on a chessboard, and whose turn it is to move. The calculator will display which king has the opposition, and how it can be used or maintained.GameTrakXNA: This project aims to create a simple library to use the unique GameTrak controller within XNA and Flash.Google Speech Recognition Example: Google Speech Recognition contains a working example of application that uses google speech recognition API. App contains all necessary dlls to record, decode and send your voice request to google service and recieve a text representation of what you've said. It's developed in C#Interval Mandelbrot Explorer: Explore the Mandelbrot set using interval arithmetic.ISD training tasks: ISD training examples and tasksiTunesControlBar: The iTunesControlBar helps user control their iTunes Application while it is minimized. iTunesControlBar resides at the top of the screen, invisible when not used, and allows playback and volume control, library searches and media information without the need to bring up iTunes.iTurtle: A bunch of Powerscripts to automate server management in AD environment.M26WC - Mono 2.6 Wizard Control: Wizard which runs under Mono2.6 A fork of: http://aerowizard.codeplex.com/Microsoft Help Viewer 2: Help Viewer 2 is the help runtime for both Visual Studio 11 help and Windows 8 help. The code in this project will help you use and understand the HV2 runtime API.MONTRASEC: Monitoring Trafficking in human beings and Sexual Exploitation of Children: benchmarking for member state and EU reporting, turning the SIAMSECT templates into a user-friendly interface and reporting tool. MTF.NET Runtime: Managed Task Framework .NET Runtime The MTF.NET runtime software and resulting assemblies are required to run applications built using the Managed Task Framework.NET Professional (Visual Studio 2010 extension) software design editor. The MTF.NET team are committed to continuously improving the core MTF.NET runtime and ensuring it is always available free and fully transparent. Pandoras Box: A greenfield inversion of control project utilising the power and flexibility of expressions and preferring convention over configuration.Pass the Puzzle: Pass the Puzzle is a frantic word-guessing party game. The game displays a few letters, and the players must come up with words containing those letters. But beware: if the timer goes off, you lose! It is based on the folk party game Pass the Parcel and is written in C#.PerCiGal: Percigal is a project for the development of applications for managing your personal media library. It consists in - a windows application to use at home to catalog movies, TV series, cast and books, with the support of the Internet for information retrieval; - a web interface for viewing and cataloging everywhere your media; - an application for smartphones. Project Flying Carpet: Este jogo é um projeto para a cadeira Projeto de Jogos: Motores Jogos do curso de Jogos Digitais da Unisinos.proxy browser: sed leo Latin's Butterfly....Python Multiple Dispatch: Multiple dispatch (AKA multimethods) for Python 3 via a metaclass and type annotations.reDune: ?????????? ???? ? ????? «????????? ? ???????? ???????». ???????? ?? Dune2000 ?? Westwood ? Electronic Arts.Rereadable: Keep page from internet for read it latter.ServStop: ServStop is a .NET application that makes it easy to stop several system services at once. Now you don't have to change startup types or stop them one at a time. It has a simple list-based interface with the ability to save and load lists of user services to stop. Written in C#.SharePoint 2010 Audience Membership Workflow Activity (Full Trust): A simple SharePoint 2010 workflow activity / workflow condition to check whether the user initiating the workflow is a member of a specified audience. Farm-level .wsp solution, written in C#. Once installed, the workflow activity can be used in SharePoint Designer 2010 declarative workflows.SQL Server® to Firebird DB converter: Converts Microsoft SQL Server® database into Firebird database including entire structure and datastegitest: test projectSystem.Threading.Joins: The Joins project provides asynchronous concurrency semantics based on join calculus and modeled after the Microsoft Research C? (C Omega) project.TestAndroidGame: try dev a TestAndroidGametetribricks: block game Topographic Explorer: A project to import, convert, explore, manipulate, and save topographical maps. Looking to use C# and WPF.Trading: Under construction!!!Trombone: Trombone makes it easier for Windows Mobile Professional users to automate status reply through SMS. It's developed in Visual C# 2008.Tulsa SharePoint Interest Group: Repository for source code for the Tulsa SharePoint Interest Group's web site. The Tulsa SharePoint Interest Group is using the Community Kit for SharePoint. This project will house any modifications that are specific to our user group.World of Tanks RU tiny stats collection utilty.: Tiny utility to load players stats for World of Tanks RU server. Results saved to comma separated file.WS-Discovery Proxy: Attempt at creating general purpose WS-Discovery Proxy.Yamaha Tu?n Tr?c: This application is used to manage information for Yamaha Tu?n Tr?c

Read the article

Workaround: XNA 4 importing only part of 3d model from FBX

- by Vitus

Recently I found a problem with importing 3D models from FBX files: it sometimes imported partly. That is when you draw a 3D model, loaded from FBX file, processed by content pipeline, you got only part of meshes. “Sometimes” means that you got this error only for some files. Results of my research below. For example, I have 10Mb binary FBX file with a model, looks like: And when I load it, result Model instance contains only part of meshes and looks like: Because models from other files imported normally, I think that it’s a “bad format” file. When you add FBX file to your XNA Content project and build it, imported file processing by XNA Fbx Importer & Processor. On MSDN I found that FbxImporter designed to work with 2006.11 version of FBX format. My file is FBX 2012 format. Ok, I need to convert it to 2006 format. It can be done by using Autodesk FBX Converter 2012.1. I tried to convert it to other versions of FBX formats, but without success. And I also tried to import my FBX file to 3D MAX, and it imported correctly. Then I export model using 3D MAX, and it generate me other FBX, which I add to my XNA project. After that I got full model, that rendered well! So, internal data structure of FBX file is more important for right XNA import, than it version! Unfortunately, Autodesk FBX is not an open file format. If you want to work with FBX, you should use Autodesk FBX SDK. This way you can manually read content of FBX file, and use it everyway. Then I tried to convert my source FBX file to DAE Collada, and result DAE file back to FBX, using FBX Converter (FBX –> DAE –> FBX). The result FBX file can be imported normally. Conclusion: XNA FbxImporter correct work doesn't depend on version (2006, 2011, etc) and form (binary, ascii) of FBX file. Internal FBX data structure much more important. To make FBX "readable" for XNA Importer you can use double conversion like FBX -> Collada -> FBX You also can use FBX SDK to manually load data from FBX P.S. Autodesk FBX Converter 2012 is more, than simple converter. It provide you tools like: FBX Explorer, which show you structure of FBX file; FBX Viewer, which render content of FBX and provide basic intercation like model move and zoom; FBX Take Manager, which allow to work with embedded animations

Read the article

Where and how to reference composite MVP components?

- by Lea Hayes

I am learning about the MVP (Model-View-Presenter) Passive View flavour of MVC. I intend to expose events from view interfaces rather than using the observer pattern to remove explicit coupling with presenter. Context: Windows Forms / Client-Side JavaScript. I am led to believe that the MVP (or indeed MVC in general) pattern can be applied at various levels of a user interface ranging from the main "Window" to an embedded "Text Field". For instance, the model to the text field is probably just a string whereas the model to the "Window" contains application specific view state (like a persons name which resides within the contained text field). Given a more complex scenario: Documentation viewer which contains: TOC navigation pane Document view Search pane Since each of these 4 user interface items are complex and can be reused elsewhere it makes sense to design these using MVP. Given that each of these user interface items comprises of 3 components; which component should be nested? where? who instantiates them? Idea #1 - Embed View inside View from Parent View public class DocumentationViewer : Form, IDocumentationViewerView { public DocumentationViewer() { ... // Unclear as to how model and presenter are injected... TocPane = new TocPaneView(); } protected ITocPaneView TocPane { get; private set; } } Idea #2 - Embed Presenter inside View from Parent View public class DocumentationViewer : Form, IDocumentationViewerView { public DocumentationViewer() { ... // This doesn't seem like view logic... var tocPaneModel = new TocPaneModel(); var tocPaneView = new TocPaneView(); TocPane = new TocPanePresenter(tocPaneModel, tocPaneView); } protected TocPanePresenter TocPane { get; private set; } } Idea #3 - Embed View inside View from Parent Presenter public class DocumentationViewer : Form, IDocumentationViewerView { ... // Part of IDocumentationViewerView: public ITocPaneView TocPane { get; set; } } public class DocumentationViewerPresenter { public DocumentationViewerPresenter(DocumentationViewerModel model, IDocumentationViewerView view) { ... var tocPaneView = new TocPaneView(); var tocPaneModel = new TocPaneModel(model.Toc); var tocPanePresenter = new TocPanePresenter(tocPaneModel, tocPaneView); view.TocPane = tocPaneView; } } Some better idea...

Read the article

503.1 Service Unavailable Error Resolution

- by Lee Brandt

I was having a hell of a time tonight with my IIS on my development laptop. I don’t remember doing anything to change the IIS settings. I don’t use IIS that much on my dev machine. Usually Cassini is enough for testing my development efforts but tonight I needed to replicate a problem that seems to stem from x86 v x64 mismatch, so I went to create an IIS site pointed to my dev folder. When I did, I got a “503.1 Service Unavailable Error”. First thing I did is go over all my setting to make sure I didn’t screw something up when I set up the site. It was pointing to the right place, and the app pool settings seemed to be alright. However, when I got the 503.1 error and went back to my app pool list, I saw that the app pool I was using was stopped again. I must’ve started and ran it a dozen times to verify that I wasn’t seeing things. After having a colleague look at it and not finding an answer, I started poking around Google. I cam across a post from Phil Haack about the same error. His fix was not mine, however. When I ran his command on the CLI, I didn’t see the reserved routes for HTTP.SYS there. Finally, I looked in the event viewer (where I should have looked as soon as I saw that my app pool was stopping) and saw an error in there. For the IIS-W3SVC-WP Source I saw: The worker process for application pool 'DefaultAppPool' encountered an error 'Cannot read configuration file due to insufficient permissions ' trying to read configuration data from file '\\?\C:\Windows\Microsoft.NET\Framework64\v4.0.30319\CONFIG\machine.config', line number '0'. The data field contains the error code. So I went to that path and saw a little lock on the file icon. I opened up the security tab for file properties and saw that I was missing the IIS_IUSRS group. On a machine that was working correctly, I verified that it indeed had the IIS_IUSRS group set to Read and Read & Execute allowed. So I set mine up the same and voila! Hopefully this helps somebody else, too.

Read the article

Leveraging Social Networks for Retail

- by David Dorf

For retailers, social media is all about B2C2C. That is, Business to Consumer to Consumer, or more specifically, retailer to influencer to consumer. Traditional marketing targeted mass media, trying to expose the message to as many people as possible. While effective, this approach has never been very efficient, with high costs for relatively low penetration. Then it was thought that marketers should focus their efforts on a relative few super-influencers that would then sway the masses. History shows a few successes with this approach but lacked any consistency or predictability. After all, if super-influencers were easy to find, most campaigns would easily go viral. Alas, research shows that most wide-spread trends were the result of several fortunate events, including some luck. So do people exert influence over each other when it comes to purchase decisions? Of course they do, all the time. But that influence is usually limited to a small set of friends and specific specialization. For instance, although I have 165 friends on Facebook, I am only able to influence my close friends and family on PC purchases, and I have no sway at all for fashion purchases. People trust my knowledge on technology, but nobody asks my advice on shoes. How then should retailers leverage social networks in order to reinforce brand image and push promotions? Two obvious ways are Like and Share. Online advertisements or wall-postings receive more clicks when the viewer sees that friends have "liked" the posting. That's our modern-day version of word-of-mouth advertising. Statistics show that endorsements from friends make it more likely a person will engage. If my friends and I liked it, then I might also "share" (or "retweet" in the case of Twitter) it with other friends. In that case the retailer has paid for X showings of the advertisement, but sharing has pushed it to an additional Y people at no cost. And further, the implicit endorsement by the sharer makes it more likely the recipient will engage. So a good first step is to find people active in social networks that will Like and Share in order to exert influence. Its still tough to go viral, but doubling engagement is still a big step in the right direction. More complex social graph analysis would be a second step, but I'll leave that topic for another day. If you're interested in the academic side of social dynamics, I suggest reading Duncan Watts' work.

Read the article

Silverlight Cream for May 12, 2010 -- #860

- by Dave Campbell

In this Issue: Miroslav Miroslavov(-2-), Mike Snow(-2-, -3-), Paul Sheriff, Fadi Abdelqader, Jeremy Likness, Marlon Grech, and Victor Gaudioso. Shoutouts: Andy Beaulieu has a cool WP7 game up and is looking for opinions/comments: Droppy Pop: A Windows Phone 7 Game Karl Shifflett has code and video tutorials up for the app he wrote for the WPF LOB tour he just did: Stuff – WPF Line of Business Using MVVM Video Tutorial From SilverlightCream.com: Flipping panels I had missed this 3rd part of the CompleteIT explanation. In this post Miroslav Miroslavov describes the page flipping they're doing. Great explanation and all the code included. Flying objects against you The 4th part of the CompleteIT explanation is blogged by Miroslav Miroslavov where he is discussing the screen elements 'flying toward' the user. Silverlight Tip of the Day #17 – Double Click Mike Snow's Tip of the Day 17 is showing how to implement mouse double-clicks either for an individual control or for an entire app. Silverlight Tip of the Day #18 – Elastic Scrolling In Mike Snow's Tip of the Day 18, he's talking about and showing some 'elastic' scrolling in his image viewer application. He's asking for opinions and suggestions. Silverlight Tip of the Day #19 – Using Bing Maps in Silverlight Mike Snow's Tips are getting more elaborate :) ... Number 19 is about using the BingMap control in your Silverlight app. Control to Control Binding in WPF/Silverlight Paul Sheriff demonstrates control to control binding... saving a bunch of code behind in the process. Project included. Your First Step to the Silverlight Voice/Video Chatting Client/Server Fadi Abdelqader has a post up at CodeProject using the WebCam and Mic features of Silverlight 4 to setup a voice & video chatting app. MVVM Coding by Convention (Convention over Configuration) Jeremy Likness discusses Convention over Configuration and gives up some good MVVM nuggets along the way... check out his nice long post and grab the source for the project too... and also check out the external links he has in there. MEFedMVVM changes >> from cool to cooler Marlon Grech has refactored MEFedMVVM, and in addition is working with other MVVM framework folks to use some of the same MEF techniques in theirs... code on CodePlex New Silverlight Video Tutorial: How to Create a Silverlight Paging System to Load new Pages In Victor Gaudioso's latest video tutorial he builds a ContentHolder UserControl that will load any page on demand into your MainPage.xaml Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

A Bad Day at Work

- by TehGrumpyCoder

There's lots of ways of having a bad day at work... I suppose for many people, just being *at* work makes it a bad day, but I happen to be one of those people that found a way to do something I like for a living. I've always said "if you're not having fun, what's the point?" ... on the latest Zune podcast, they were interviewing someone from the WP7 team and he said they're mantra is "It's not done until it's fun" ... I like that too. But, even when you're doing what you like for a living, it can get tedious. There were times that I didn't look forward to going out and playing guitar on a Friday or Saturday night, and some nights I was looking at my watch just waiting for it to be over. Well, that was today... like Steve Martin in "The Jerk" ... the first hour was like a regular hour, but then the rest of the morning was like a day, and the afternoon has been like a week. I've got a list of stuff I need to get into my head, and it's tough when the highest technology you have during 9 hours of your day is .NET 2.0 and you can only run what IT installed. I get wrapped around the power take-off reading something and dearly want to write some code to try, but with the state of technology here, it's like trying to teach jazz chords to someone that showed up for their lesson with that stupid plastic guitar from Guitar Hero. I tried to watch a training video... downloaded it zipped so maybe it wouldn't be noticed like it might if I streamed it. Then nothing on this machine would play the video... dang! Well, if someone doesn't take me out on the drive tonight or back in tomorrow, maybe it'll be a better day... or maybe I'll d/l a bunch of training videos in a different format, or bring in a decent viewer, or download them to my Zune maybe... that would work. I suppose at age 61 there are worse things than feeling stifled... for instance, so far I've lived 2 years longer than my father... but at the same time, he's the one that pointed out that in my first letter home from Boot Camp "He's complaining, he's fine"... guess he had my number :) I think he'd appreciate "Teh Grumpy Coder"

Search Results

Search found 5389 results on 216 pages for 'picture and fax viewer'.

Page 138/216 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145 | Next Page >

- by user206343

- by user100604

- by Coolface

- by DrewDiezel

- by netbeanstips

- by mbcrump

- by Dave Campbell

- by Dave Campbell

- by aste123

- by Shawn Cicoria

- by DigitalGeekery

- by Asian Angel

- by Mysticgeek

- by DigitalGeekery

- by johndoucette

- by Asian Angel

- by Michelle Kimihira

- by Rob Addis

- by Vitus

- by Lea Hayes

- by Lee Brandt

- by David Dorf

- by Dave Campbell

- by TehGrumpyCoder

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145 | Next Page >