Search Results

Search found 8343 results on 334 pages for 'split dns'.

Page 138/334 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• MX Record Propagation

  - by Ryan

  How long does it take a change in MX records to propagate? Is the MX record TTL the max time it will take or do we also need to wait for all DNS records to propagate? We are changing our mail server from Exchange 2003 to Exchange Online. Our current MX records (at Network Solutions) have a 1 & 2 hour TTL (primary and backup MX respectively). When we change the MX records to point to Exchange Online should all MX records worldwide be updated within 2-4 hours or should we assume the traditional 48 hours for DNS to propagate? I assume that once all MX records propagate that all new incoming email will be directed to the new server.

  Read the article

• Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

  - by Darin Peterson

  Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance: iface eth0 inet static address 192.168.1.210 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 8.8.8.8 8.8.4.4 For the DRAC card, I configured the LAN like this: address 192.168.1.215 netmask 255.255.255.0 gateway 192.168.1.1 For the advanced LAN settings I used dns-nameservers 8.8.8.8 8.8.4.4 I've tried many different IP addresses, but cannot communicate with the card. Is there anyone who might know if I have configuration issues, or maybe if the card might be bad?

  Read the article

• ASA 5510 Need to filter traffic log events to my iPhone

  - by drpcken

  For some reason I cannot update apps or download apps to any ios devices on my network (tried both iphone and ipads). When I'm at home on my own network everything works fine. This started about a week ago. I've configured my iphone with a static IP address and even used 4.2.2.2 as my dns to rule out that the issue is with my DNS Server. I'm looking at the SYSLOG in ASDM (Cisco ASA 5510) but Im not sure it is providing me enough info. It seems to be showing ACL blocks on my public ip address, but not individual client IP's, so I can't see whats going on. How can I setup a way to filter any incoming/outgoing traffic to my iPhone's static IP and try and troubleshoot this?

  Read the article

• Can't connect to Windows Server 2008 shared folders via VPN connection

  - by Pearl

  I set up an VPN connection on my 2008 server using RRAS. The VPN seems to work fine. I can connect from outside the network. I am also able to establish a remote access connection via the VPN-IP. However, I can't access my shared folders. After connecting to the VPN I can ping the server, but it is not shown in my networks. using \ip or \server-name doesn't work either, cannot be found. I checked ipconfig and this is what I found regarding the VPN: DNS-Suffix: Description: test Physical Adress: DHCP activated: No Auto-Config: Yes IPv4-Adress: 192.168.2.114 Sub: 255.255.255.255 Standard-gateway: DNS-Server: 192.168.0.1 NetBIOS: activated To clarify my IP-situation: server is connected to router with 192.168.0.x, the test-client is in an external network connected to a router with 192.168.1.x, server-client connection is using static ips with 192.168.2.x Can anyone help me with this one? The VPN should be ok since I am able to establish remote access.

  Read the article

• Exclude IPs from FQDN Resolution

  - by Jon Rauschenberger

  Is there a way to EXCLUDE IPs on an interface from FQDN resulution? Here's my use case; I have a domain joined Windows Server 2008 R2 machine that hosts multiple Web sites. We ahve DNS A records for the various sites that resolve to different IP addresses. I've added those IPs to the single NIC in the machine and the sites work just fine. The problem is that the FQDN of the machine now resolves any of the IPs on the machine. I only want the primary IP associated with the FQDN on the internal DNS servers. Is there ANY way to accomplish this? jon

  Read the article

• Exposing the AnyConnect HTTPS service to outside network

  - by Maciej Swic

  We have a Cisco ASA 5505 with firmware ASA9.0(1) and ASDM 7.0(2). It is configured with a public ip address, and when trying to reach it from the outside by HTTPS for AnyConnect VPN, we get the following log output: 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Built inbound TCP connection 2889 for outside:<client-ip>/51000 (<client-ip>/51000) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Built inbound TCP connection 2890 for outside:<client-ip>/50999 (<client-ip>/50999) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Teardown TCP connection 2889 for outside:<client-ip>/51000 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Teardown TCP connection 2890 for outside:<client-ip>/50999 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency We finished the startup wizard and the anyconnect vpn wizard and here is the resulting configuration: Cryptochecksum: 12262d68 23b0d136 bb55644a 9c08f86b : Saved : Written by enable_15 at 07:08:30.519 UTC Mon Nov 12 2012 ! ASA Version 9.0(1) ! hostname vpn domain-name office.<redacted>.com enable password <redacted> encrypted passwd <redacted> encrypted names ip local pool vpn-pool 192.168.67.2-192.168.67.253 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.68.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address <redacted> 255.255.255.248 ! ftp mode passive dns server-group DefaultDNS domain-name office.<redacted>.com object network obj_any subnet 0.0.0.0 0.0.0.0 pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu inside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected ! object network obj_any nat (inside,outside) dynamic interface timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL http server enable http 192.168.68.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto ca trustpoint _SmartCallHome_ServerCA crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=vpn proxy-ldc-issuer crl configure crypto ca trustpool policy crypto ca certificate chain _SmartCallHome_ServerCA certificate ca 6ecc7aa5a7032009b8cebcf4e952d491 <redacted> quit crypto ca certificate chain ASDM_TrustPoint0 certificate f678a050 <redacted> quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.68.0 255.255.255.0 inside ssh timeout 5 console timeout 0 vpn-addr-assign local reuse-delay 60 dhcpd auto_config outside ! dhcpd address 192.168.68.254-192.168.68.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ssl trust-point ASDM_TrustPoint0 inside ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside enable inside anyconnect image disk0:/anyconnect-win-3.1.01065-k9.pkg 1 anyconnect image disk0:/anyconnect-linux-3.1.01065-k9.pkg 2 anyconnect image disk0:/anyconnect-macosx-i386-3.1.01065-k9.pkg 3 anyconnect profiles GM-AnyConnect_client_profile disk0:/GM-AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_GM-AnyConnect internal group-policy GroupPolicy_GM-AnyConnect attributes wins-server none dns-server value 192.168.68.254 vpn-tunnel-protocol ikev2 ssl-client default-domain value office.<redacted>.com webvpn anyconnect profiles value GM-AnyConnect_client_profile type user username <redacted> password <redacted> encrypted tunnel-group GM-AnyConnect type remote-access tunnel-group GM-AnyConnect general-attributes address-pool vpn-pool default-group-policy GroupPolicy_GM-AnyConnect tunnel-group GM-AnyConnect webvpn-attributes group-alias GM-AnyConnect enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context call-home reporting anonymous Cryptochecksum:12262d6823b0d136bb55644a9c08f86b : end Clearly we are missing something, but the question is, what?

  Read the article

• Web server (IIS) and database mirroring (Postgresql)

  - by Timka

  Recently our web-server crashed and we had to recover everything from a backup which took the whole day(totally unacceptable in our business). So my question is, how can I create a complete mirror of the server that I can use (switch dns to) in case the same disaster happens in the future? Our main server is on Amazon with Windows 2008/IIS + Postgresql 9.1. I was thinking on creating the same server on a different location as a complete mirror with the database replication. But I'm not sure how to implement IIS instance mirroring over the internet... So my question is, how can I create a complete mirror of the server that I can use (switch dns to) in case the same disaster happens in the future?

  Read the article

• Change of IP address [closed]

  - by Edgar

  How do I change an IP DNS address to an automatic IP address?

  Read the article

• How do I set up an IP address on a Linux VM running in VM Player so I can access it from my Windows 7 host?

  - by BradyKelly

  I have just installed an Openbravo appliance on my Windows 7 VM Player host. I am now staring at a command prompt that tells me to go to http://localhost to access the ERP system, but I cannot find any browser on the appliance. I am guessing I should rather follow their advice to configure an IP address for the Linux VM and just access that from a Windows browser on my host. How do I go about this? More specifically, How do I choose a local IP address to assign? How do I set things up so that this IP address is visible to my Windows host? Their help says to assign an DNS, to make the server visible to the internet, but internet visibility per se is not needed. How should I interpret or adapt this help for that? Finally to make the IP address available to the Internet, assign some DNS servers to it: $ echo "nameserver IP_DNS1" /etc/resolv.conf $ echo "nameserver IP_DNS2" /etc/resolv.conf

  Read the article

• DIR 601 No wireless internet

  - by ashley

  I have an orange globe on my d link router. I signed into 192.168.0.1 and went to Manuel Internet Connection Setup as I was told to do. When I clicked on that and tried to clone my PC's MAC address, it said invalid MAC address. Host Name : DIR-601 Use Unicasting : (compatibility for some DHCP Servers) Primary DNS Address : 0.0.0.0 Secondary DNS Address : 0.0.0.0 MTU : (bytes) MTU default = 1500 MAC Address : F8:1E:DF:EA:38:E6 How do I get a valid MAC address so I can save the settings and move on to the next steps I was told to do in order to get wireless internet again?

  Read the article

• Virtualmin Configuration

  - by Allen

  I am trying to get Virtualmin setup and have reached a point where my noobish sysadmin skills aren't getting the job done. This is the message I get now when I try and refresh the configuration of Virtualmin. BIND DNS server is installed, and the system is configured to use it. However, the default master DNS server XXXXXX is not a fully qualified domain name. Sendmail is only accepting SMTP connections on the following ports : 127.0.0.1 port smtp. Email from other systems on the Internet will not be accepted. This can be changed in the Sendmail Mail Server module. Please advise what I need to do to get Sendmail configured properly. Thanks!

  Read the article

• iChat can't authenticate to Lion Server 10.7.2 [migrated]

  - by glenstorey

  I've enabled iChat and iCal Server through our local 10.7.2 Server which has DNS set up correctly. I can add the server account via a client's System Preferences (under other - Mac OS X server) and it authenticates with my shortname correctly. However, when I load iChat, I get this error message: Where the account is [email protected]. The password and username is correct. Console throws this error: 22/11/11 3:03:31.135 PM imagent: [Warning] XMPPConnection: Error: Error Domain=XMPPErrorDomain Code=105 "The operation couldn?t be completed. (XMPPErrorDomain error 105.)" UserInfo=0x7f81bbe2a3e0 {XMPPErrorText=service requested for unknown domain} DNS is set up correctly (it's working for Profile Management, Software Update Server and Web Services) but I can't get iChat to work correctly. How can I get clients to authenticate? FYI: It's probably worth noting that I get the exact same error messages when I use [email protected] instead of [email protected]. Also posted this question on Apple Discussion here.

  Read the article

• Getting rid of Plesk on a VPS

  - by TomA

  I've been using a relatively expensive VPS for hosting about 30 domains and I want to migrate to a cheaper one, without Plesk. Both use CentOS. My users will not care, they don't use Plesk anyway. But I will not be able to use it for creating new virtual hosts, FTP accounts etc. I'm not a commandline guru, esp. not in a server environment. Is there a free Plesk alternative for these purposes? I need to: Create a new virtual host with it's own FTP account Setup some basic FTP quota I don't need: DNS management (the new VPS service has an external DNS management GUI) Mail server management (I use Google Apps) Any suggestions welcome, from Plesk alternatives to "RTFM" or links to tutorials.

  Read the article

• Using "route add" to tell my computer to use a direct ethernet connexion instead of wifi ?

  - by TheSamFrom1984

  2 PCs are involved. Both are connected to the internet via Wifi on the same router. I can ping to/from each other and share folders flawlessly, but I'd like to be able to set a direct Ethernet link between them to speed up file transfers AND keep the Wifi connections (no gateway). So I plugged my RJ45 cable, and set up the connection. It works, but the PCs are only using this connection if one of them if disconnected from the Wifi. PC1 local address is 192.168.0.7 on its ethernet interface, and 192.168.1.21 on the wifi one. PC2 local address is 192.168.0.6 on its ethernet interface, and 192.168.1.22 on the wifi one. My question is : I'd like to using the route add command to tell PC1 to use the Ethernet interface when it needs to connect with PC2, by specifying "IF 2" at the end of the route add command. How can I do this ? I don't know what to put in the "gateway" parameter of the command, and everything I tried returns "the parameter is incorrect" (i don't know which one). ipconfig /all on PC1 : Windows IP Configuration Host Name . . . . . . . . . . . . : Sam-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : NETGEAR WG111v3 54Mbps Wireless USB 2.0 Adapter Physical Address. . . . . . . . . : 00-22-3F-DA-51-56 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::1d33:60b:476c:d396%12(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.21(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : vendredi 27 novembre 2009 15:38:48 Lease Expires . . . . . . . . . . : dimanche 29 novembre 2009 07:33:04 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 301998655 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1A-4D-59-B2-71 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f598:c3a0:df8d:706e%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234887757 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• best practice with memcache/php - multi memcache nodes

  - by user62835

  So I am working on a web app - that has to be built for scalability. It stores frequent MySQL querys into the cache. I have pretty much everything built and ready to go - but I am concerned on best practices on handling where to cache the data. I've talked to a few people and one of them suggested to split each key/value across all the memcache nodes. Meaning if i store the example: 'somekey','this is the value' it will be split across lets say 3 memcache servers. Is that a better way? or is memcache more built on a 1 to 1 relationship?. For example. store value on server A till it faults out - go to server B and store there. that is my current understanding from the research I have done and past experience working with memcache. Could someone please point me in the right direction in this and let me know which way is best or if I completely have this mixxed up. Thanks

  Read the article

• 2 routers, both DHCP, no IP assigned

  - by piobyz

  I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

  Read the article

• firehol (firewall) with bridge: how to filter

  - by Leon

  I have two interfaces: eth0 (public address) and lxcbr0 with 10.0.3.1. I have a LXC guest running with ip 10.0.3.10 This is my firehol config: version 5 trusted_ips=`/usr/local/bin/strip_comments /etc/firehol/trusted_ips` trusted_servers=`/usr/local/bin/strip_comments /etc/firehol/trusted_servers` blacklist full `/usr/local/bin/strip_comments /etc/firehol/blacklist` interface lxcbr0 virtual policy return server "dhcp dns" accept router virtual2internet inface lxcbr0 outface eth0 masquerade route all accept interface any world protection strong #Outgoing these protocols are allowed to everywhere client "smtp pop3 dns ntp mysql icmp" accept #These (incoming) services are available to everyone server "http https smtp ftp imap imaps pop3 pop3s passiveftp" accept #Outgoing, these protocols are only allowed to known servers client "http https webcache ftp ssh pyzor razor" accept dst "${trusted_servers}" On my host I can connect only to "trusted servers" on port 80. In my guest I can connect to port 80 on every host. I assumed that firehol would block that. Is there something I can add/change so that my guest(s) inherit the rules of the eth0 interface?

  Read the article

• How do I do a swing migration of Exchange 2007?

  - by Graeme Donaldson

  As per my previous question, I have an Exchange 2007 box which is also a DC. Since I can demote it while Exchange is installed, I need to a swing migration. Does anyone have any articles, tips or experiences to share on this? The last time I did a swing it was with Exchange 2003 and even that is a little rusty in my head. The setup is a single Exchange 2007 Hub/Edge/Mailbox/CAS server. Its currently on Windows Server 2008, I can migrate it to the same OS, or I can go to 2008 R2, I'm not really picky on that. We're running OWA/ActiveSync/POP3(S)/IMAP(S) for client access. I already have another fully functional DC/GC/DNS box in the same site and clients in the site are already using that for DNS. It's also the preferred site bridgehead for AD replication. Any tips?

  Read the article

• I have a mail server that hosts several client emails but 1 in particular is being blocked because of its SBRS score

  - by Vince Saavedra

  If I was hosting emails for 3 clients and my reverse DNS is mail.allclients.com and I am hosting for client2.com, client3.com etc. What would be the rDNS for client3.com? Would it reflect the rDNS of mail.allclients.com? If so, I do I prevent mails from client3.com from being blocked because the PTR does not match rDNS? Finally on your advice to have my email service publish an SPF record. Is this something I need to submit to the company I registered my mail.allclients.com to? So I for example registered with GoDaddy.com then I will need to submit a request to them to publish an SPF record on their DNS right? Thank you for your advice and kind assistance. Vince Saavedra

  Read the article

• unable to receiving emails to my client.

  - by Karthik Malla

  Hello, I created my own mail server client my domain name is www.softmail.me from this mail client I can able to send emails to any email provider but I cannot receive any emails back. I hosted my client at http://beta.softmail.me do I need to apply settings of a sub domain or domain settings are enough. Kindly check my dns settings and reply me. my DNS details are A (Host) host = @ points = 65.75.241.26 host = beta points = 65.75.241.26 host = accs points = 65.75.241.26 host = mail points = 65.75.241.26 host = stable points = 65.75.241.26 CNAME (Alias) host = imap points = mail host = pop points = mail host = smtp points = mail host = www points = @ MX (Mail Exchange) priority = 10 host = mail points = @ Please verify the above settings and tell me why I am unable to receive emails back from other email providers.

  Read the article

• Can't access some websites with any browser

  - by Charles Kingsmill

  I'm running Windows 7 64-bit on a new Samsung laptop and accessing the internet okay via ethernet cable to my university's ISP. Some sites work fine (e.g. google.com) but I can't access others at all (microsoft.com, topshop.com). I can't connect to those sites in safe mode with networking. And ping and tracert both fail. There's no proxy. Other users can connect successfully to these sites using my cable and socket. I've tried all the following with no success: using various browsers (IE9, FF, Chrome) creating a new user updating drivers clearing the DNS cache using OpenDNS and Google's DNS turning off Avast tweaking the MTU running MS malicious software removal tool running Spybot S&D reviewing the hosts file disabling the IPv6 options repairing / resetting winsock settings disabling advanced javascript options I have run out of ideas... can anyone see anything I've missed??!

  Read the article

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• DNSHost.exe trojan found, now after fix, no one can print

  - by Matt Dawdy

  What started today as an inability to get to the internet (but people could get in just fine), morphed to we realized that the DNS Server wasn't working, then we figured out that we had a trojan called DNSHost.exe (spybot.rl I think), and we disabled its service entry and deleted the offending file and all registry keys told to use by the Trend Micro site. Now, we can get on the internet, but the printer being served by this machine (called server2) cannot be printed to from any client machine on the network. We get the error "The RPC Server is unavailable". I'm assuming that this is related to the DNS issue we had earlier, as we were able to print just fine until this fun happiness started this morning. Anyone have any solid suggestions? Windows Server 2003 R2 SP2, and the client machine are all Windows XP SP2.

  Read the article

• Mixed network, Linux-to-Linux hostname resolution issues

  - by James

  At work we have an WinSBS domain at the heart of our network, which is all Windows PCs. The domain controller is acting as a DNS for these computers. I have recently added some personal use Linux machines to the network, without joining them to the domain. I have set up Samba with "wins server" pointing to the domain controller, which lets the Windows boxes resolve the Linux hostnames just fine. I also have resolvconf set up with the domain controller as a nameserver and the local domain as a searched domain, which lets the Linux boxes resolve the Windows hostnames just fine. However, the Linux boxes will not resolve other Linux hostnames at all. Given that I don't have control over the DNS server (I am not the network admin) and that at least one of the Linux boxes is not an always-on machine and is likely to change its LAN IP frequently (via DHCP), what service am I missing to make their hostnames visible to each other?

  Read the article

• Internet connection very slow after Linksys configuration

  - by NLV

  Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >