Search Results

Search found 4539 results on 182 pages for 'bhargava dns'.

Page 139/182 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146 | Next Page >

Wireless dropouts that only affect subset of devices

- by jwaddell

When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

Read the article
SharePoint 2010 MySites - Simple explanation needed!

- by Chris W

I've been playing around with the 2010 beta for a couple of weeks, experimenting with topology options etc. I think I've got myself totally confused as to how it works hence if there's any SP experts out there that can explain things in simple terms for me I'd appreciate it! I want to setup a farm with 3 servers providing the content & MySites. I presume that the way to do this is to load balance or DNS round robin traffic between the 3 servers. The bit where I'm confused is that My Site Settings page asks for a specific My Site Host hence all my site traffic will be pushed to a single server even though we have 3 in the farm. If this hosts fails I presume MySites will be unavailable. Is this right? How do I configure it so that access to MySites is load balanced across the 3 servers in the farm?

Read the article
Apache Virtual Host Configuration

- by Carl

I have been searching the internet for an hour now, and I was hoping for a quick hint here so that I could solve my problem a wee bit faster. My virtual server is so far only accessible through an IP address, no DNS entry yet, and so far none needed either. The problem I have is with Apache2, the virtual hosts are puzzling me. What I need is: Access to my project (based on Symfony2) from the outside with the IP address Access to my project from localhost What I have got: Access from the outside results in rendering the websites in /var/www/vhosts/htdocs/default, while from the inside results in rendering the websites in /var/www. Why the difference? What is a recommended configuration for my use case?

Read the article
Windows 2003-R2-Server: Process "System" takes large chunks of CPU time

- by Dabu

I have a domain controller running 2003 R2. The server behaves very well when restarted daily, however, each day it is not restarted, there's a process called "System" that takes enourmous chunks of CPU time (up to 95%). The server supports AD, WINS, DNS, has Kaspersky Endpoint Security running, and manages backups via Arcserve 15. When I tried so far: Process Explorer (ex-Sysinternals) shows that the "System" process has no sub-processes. In the "Threads" tab of the detailled view I can see that 90% of the CPU time is used up by "ntkrnlpa.exe+0x803c0". The "Interrupts" process is running at 3-5% of CPU time, I'm not sure if this accounts for the amount of CPU time that System takes.

Read the article
In CentOS 4.3 Webmin 1.3000 bandwidth monitoring is eating disk space. How to delete those files?

- by Silkograph

I maintain Linux server being used for Mail, Squid and DNS service. Recently I observed that something was eating server disk space. But at last, today I caught the culprit which was consuming the disk by storing large number of files. On this server, Webmin 1.300 is installed. We use Squid proxy and Sarg to monitor Internet access. I always manually clear Sarg generated files under /var/www/html/squid for last few years. But I never realized that Webmin is also storing some kind of bandwidth log files in its' directory structure. I have noticed that under /etc/webmin/bandwidth/hours it has stored more thousands of files since year 2007 totaling about 17 GB. We have used 40 GB HDD for this server machine. My question is how can I delete those (/etc/webmin/bandwidth/hours) files safely?

Read the article
Install Trac Without Setting Up a VirtualHost in Apache?

- by jobu1324

I'm trying to set up Trac to test out it's functionality, and the only guides I can find online talk about setting up a VirtualHost. Right now I am under the impression that I need access to a DNS server to properly use the VirtualHost directive, and for various reasons I don't have access to one. Is it possible to set up Trac without setting up a VirtualHost? I haven't had any luck. If I run the site with tracd, it works - which means that at least part of it is set up properly. Right now all I have is an Apache Directory directive pointing to /pathToTracSite/htdocs/, and when I visit the trac location, all I get when viewing the site from a browser is an empty directory (which makes sense, because htdocs/ is empty). My server is running Apache2 I know I'm missing a lot here, because I don't understand Apache the Trac system very well - any help would be appreciated.

Read the article
Name of my sql server instance from outside the network

- by Michel

Hi, normally i connect to my sql server instance from my local computer, and then the server name to connect to is the name of my laptop. So i can connect to server instance 'MichelLaptop' But now i'm trying to connect to my server from outside my network, and the first thing i wonder is: what is the name of the instance? i've made a redirect to my local machine in the DNS of my domain, so i said (this is not the real data) testsql.mydomain.com goes to 190.191.192.193 and when i ping testsql.mydomain.com, i get a response from 190.191.192.193 But what then is the server name?

Read the article
Dynamic to static internal IP address (Snow Leopard server)

- by bac

I purchased a new Mac mini server, since my old iMac, which was a server pretty much died. My problem is this. How do I change my internal IP address for my mac mini server to a static address, like 192.168.0.2? Before you guys harp on me, my old server was running Ubuntu Hardy and I only had to map the IP address in the router, which would automatically assign the reserved address through DHCP. Now, I know things are different between the two, but my problem is that the mac is not accepting the assigned IP address or the router just is not assigning. However, every time I have manually changed it on the Mac to an address of my choice, it takes the computer off the Internet. My router is a NetGear WTG624 v2, I believe. I need this to work, so I can utilize Dynamic DNS.

Read the article
Very slow loading pages with router

- by user984621

I bought new router - this one: http://www.tp-link.com/en/products/details/?model=TL-WR841ND and the problem is, that the loading pages is so slow, even sometimes the pages aren't loaded at all. Is the same, when I have on the Mac OS or Windows. Below are the informations from the router-admin section: LAN IP Address: 192.168.2.1 Subnet Mask: 255.255.255.0 WAN IP Address: 192.168.1.100 Dynamic IP Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.254 DNS Server: 89.203.178.2 , 10.14.2.1 How can I fix this problem? Is almost impossible to use the internet this way.

Read the article
Cisco PIX firewall blocking inbound Exchange email

- by sumsaricum

[Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

Read the article
How to register a new domain name on a windows based domain controller?

- by JL

Is there an easy and quick way I can create a new subdomain on a windows based domain controller. My primary domain controller is also my primary DNS server on my network. I want to create a subdomain and have its ip directed to that of my IIS server. Thanks in advance... Sorry if my terminology is somewhat lacking... My domain is companyName.com What I want to do is create auditingResults.companyName.com... and have it route to 192.168.1.3 for example..... where on 1.3 I will have an IIS server presetup. Please feel free to leave comments to correct my terminology if required....

Read the article
Yahoo toolbar and local sites (e.g. Intranet)

- by Klaptrap

We have local sites running on IIS in regular MS Windows network. User base has IE, FireFox and Chrome. Local sites are isolated by host headers and DNS record created for the common IP accordingly. This is a regular set-up. Users without Yahoo Toolbar type http://intranet and the sites resolves. Users with Yahoo toolbar type http://intranet and the toolbar goes off to search for this site in public domain. This is irrespective to whether the address is typed into the browser address bar or the toolbar. All versions of toolbar and IE are affected. I cannot see a setting on the toolbar to switch this "irritating" behaviour off and simply un-installing the toolbar is not an option. Any ideas?

Read the article
hMailServer Email + MX Records Configuration

- by asn187

Trying to make DNS changes to enable email to be sent using hMailServer. My mail server is on a separate machine with a separate IP Address. I have already added MyDomain.com and an email account I have create a MX Record with the mail server being mail.domain.com an a priority on 20. 1) But the question is how do I now link this MX record for the domain to my mail server/ mail server IP Address? 2) What changes are needed in hMailServer to complete the process and be able to send emails for the domain? 3) In Settings SMTP Delivery of email: What should my configuration here look like?

Read the article
How can I control wireless networks in Ubuntu without Network-Manager?

- by Solignis

Hi there, I recently installed Ubuntu on a laptop I got. I was having issues with the network manager just like I was having in my VM where it was not setting up the hostname correctly. Anyhow now I have a problem, since it is a laptop it will be moving.... But I have no way to discover new wireless networks. Anyway I can gain that functionality back? The problem I am running into is that I need to set the DNS search and domain for the machine so I can access my network but the network-manager was overriding the settings. Any help would be much appreciated.

Read the article
Cant access EC2 hosted website

- by Himanshu Page

For some reason, I am unable to access our website www.doccaster.com (Bad request nginx). We are hosted on amazon EC2 with elastic ip associated to it. The weird part is a) I can access it through the public dns url http://ec2-184-73-195-180.compute-1.amazonaws.com b) My co founder who is located in another city can access it via www.doccaster.com. I observed that my instance was failing reachability check, so I launched a new one and assigned it the the elastic ip. I tried to ping the ip address 184.73.195.180 from my machine but no success. Any help will be really appreciated. More details I ran the following command on my server netstat -lntp | grep -E 'apache|httpd' and it displays :::80 for httpd . Is this accurate ? Should it be 0:0:0:80 ? or doesnt matter?

Read the article
Configuring sendmail to use one outbound MTA exclusively

- by Charlie Martin

I have a sendmail problem, and I'm anything but a sendmail guru -- I could use some help. My problem is that I have a system intended to be more or less an "appliance" -- it's not intended to have an admin. Because of this, it needs to be able to "call home" by sending email. As we have configured it, this works fine -- using sendmail, it finds the appropriate relay by looking up an MX record and everything works fine. Now, however, because of security concerns, we want to limit it to using exactly one relay, so for example relay.corp.example.com. Should the user configure it to use, say, fubar.example.com, the mail sending should fail or be deferred. I thought that by configuring sendmail with a /etc/mail/server.switch file containing hosts files without dns, I'd get that effect. This doesn't work -- instead, if it gets mail addressed to [email protected], it tries to talk directly to example.com, and ignores the configured server. Any ideas?

Read the article
SSL Certificate

- by Dremarturg

Hey, I have a mail-server running and I want to buy a SSL-Certificate as they are pretty cheap now. I use mail.domain.com as reverse-DNS, POP3 and SMTP clients use mail.domain.com (some use pop3.domain.com and smtp.domain.com) for sending and receiving e-mails. The SSL-Submission asks me for a domain - is it mail.domain.com or domain.com as I do not have a Wildcard-SSL? I just want to use it for Mail. Or is it possible to use it for both by using domain.com? (Apache and Postfix/Courier on the same server and IP)

Read the article
ssh into my mac from my ipod

- by mechko

Ok so this is what I got, but it don't look right... The set up is as follows: My Mac is on a wireless network, presumably behind a firewall over which I have no admin privileges. Further, said wireless network changes my internal IP randomly at random times, so I do not know what my ip is. Note that localhost is a variable ip I forward some port or the other to my dns: ssh -R 19999:localhost:22 sourceuser@remotehost connect to my remotehost from my machine: ssh sourceuser@remotehost and then connect to the port I forwarded: ssh localhost -p 19999 [solved] Second question, there are a bunch of ssh clients for the iphone. Which one should I use? EDIT: Since jailbreak is not illegal, simply frowned upon by the Corporation, I've decided to go with that. I have a nice shell with openssh and the works. Best of all, it's free and it does exactly what you expect.

Read the article
Problem running application on windows server 2008 instance using amazon ec2 service and WAMP

- by Siddharth

I have a basic (small type) windows server 2008 instance running on amazon ec2. I've installed WAMP server on to it, and have also loaded my application. I did this using Remote desktop Connection from my windows machine. I'm able to run my application locally on the instance, however when I try to access it using the public DNS given to it by amazon, from my browser, I'm unable to do so. My instance has a security group that is configured to allow HTTP, HTTPS, RDP, SSH and SMTP requests on different ports. In fact I have the exact same security group as the one used in this blog, http://howto.opml.org/dave/ec2/ I did almost everything same as the blog, except for using a different Amazon Machine Image. This is my first time using amazon ec2, and i can't figure out what I'm doing wrong here

Read the article
Fresh Apache install can't be connected to

- by Wayne M

I've got to be missing something here. I have a brand new CentOS server with a LAMP install on it. My domain host (GoDaddy) has the server's IP address configured as the "A Record". Since the server will host subdomains I have enabled NameVirtualHost and set up a virtual host pointing to the web app on the server. I haven't touched anything else in Apache, and it's listening on Port 80 like it should be. However, I can't connect to the server either by DNS or by IP address. I've set up several servers exactly like this one and never run into this before. What could be causing this? Did someone on the host set up a firewall or something that blocks port 80? As I said, I can't connect to the server via anything, but it's a barebones box with LAMP installed on it.

Read the article
Set Valid IP On Vmware Vm's Help Please

- by Shahin At

I Have a VPS.And i on my vps installed vmware workstation version 9.now i have 3 valid ip's: XXX.152.193.66 XXX.152.193.101 XXX.152.193.103 Gateway: XXX.152.193.65 now tow ip's set in host and i want to 1 ip set on vm. network vm is bridge and set ip on vm but this ip from out of internal network not ping and in vm not ping to gateway. What can I do to solve this problem? my ip is unassigned and only set on vm and use bridge network mode.and gw,mask,dns is set.but not ping. i set this ip on host and without problems is worked, But I do not know why on vm not worked. my host OS Is Windows Server 2003 and firewall is off and RRAs(routing and remote access) For VPN service is Enable. Do not host or virtual machines to create a IP route?

Read the article
SAMBA and Linux ACLs -- "Permission denied" on write to share but file written nevertheless

- by MCH

I set up a writable share directory "/home/net/share" with acl like this: sudo mkdir -p "/home/net/share" sudo setfacl -m "u:localuser:rwx,u:remoteuser:rwx,g:users:rwx" "/home/net/share" My /etc/samba/smb.conf looks like this: [global] workgroup = w server string = server security = user load printers = no log file = /var/log/samba/%m.log max log size = 50 dns proxy = no printing = bsd printcap name = /dev/null disable spoolss = yes encrypt passwords = true invalid users = nobody root follow symlinks = yes wide links = yes [share] comment = Writable by localuser and remoteuser path = /home/net/share valid users = remoteuser read only = no public = no printable = no Locally, localuser and remoteuser have user accounts and smbpasswds and can both read, create and delete files in /home/net/share. But when I log on from a different machine (like this: sudo mount -t cifs //server/share mountpoint/ -o username=remoteuser ), I get "Permission denied" both when trying to create directories and files, oddly though, it does create files (not directories!) despite these messages! How can I get this working?

Read the article
Exclude pings from apache error logs (ran from PHP exec)

- by fooraide

Now, for a number of reasons I need to ping several hosts on a regular basis for a dashboard display. I use this PHP function to do it: function PingHost($strIpAddr) { exec(escapeshellcmd('ping -q -W 1 -c 1 '.$strIpAddr), $dataresult, $returnvar); if (substr($dataresult[4],0,3) == "rtt") { //We got a ping result, lets parse it. $arr = explode("/",$dataresult[4]); return ereg_replace(" ms","",$arr[4]); } elseif (substr($dataresult[3],35,16) == "100% packet loss") { //Host is down! return "Down"; } elseif ($returnvar == "2") { return "No DNS"; } } The problem is that whenever there is an unknown host, I will get an error logged to my apache error log (/var/log/apache/error.log). How would I go about disabling logs for this particular function ? Disabling logs in the vhost is not an option since logs for that vhost are relevant, just not the pings. Thanks,

Read the article
Iptables remote port forwarding and dynamic remote ip

- by lbwtz2

Hello, I want to forward a port from my remote vps to my domestic server and I am quite a newbie with iptables. The problem is that I am using a dynamic dns service to reach my home server from the internet so I don't have a fixed ip and iptables doesn't like urls. The rules I am willing to use are these: -t nat -A PREROUTING -p tcp -i eth0 -d xxx.xxx.xxx.xxx --dport 8888 -j DNAT --to myhome.tld:80 -A FORWARD -p tcp -i eth0 -d myhome.tld --dport 80 -j ACCEPT Of course I recevie a Error BAD IP ADDRESS because of myhome.tld. What can I do?

Read the article
Different Servers for incoming mails

- by André

Hi everybody, not sure if what I want is possible so I´d appreciate any pointers. I have full control over the infrastructure (DNS and servers) Currently I receive mails for domain.tld. MX record for domain.tld is gw.domain.tld. gw then does some spam and virus checking and forwards the mails to the internal exchange server. GW is a Proxmox Mail Gateway Box (Free license) Now what I want is to distribute mails for different recipients to other mail servers. Basicly I only want [email protected] and [email protected] to go to the exchange as before, but all others go to a different mail server (based on linux). Any idea how I could achieve this?

Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146 | Next Page >