Search Results

Search found 13331 results on 534 pages for 'fluent interface'.

Page 139/534 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >

  • Composite-like pattern and SRP violation

    - by jimmy_keen
    Recently I've noticed myself implementing pattern similar to the one described below. Starting with interface: public interface IUserProvider { User GetUser(UserData data); } GetUser method's pure job is to somehow return user (that would be an operation speaking in composite terms). There might be many implementations of IUserProvider, which all do the same thing - return user basing on input data. It doesn't really matter, as they are only leaves in composite terms and that's fairly simple. Now, my leaves are used by one own them all composite class, which at the moment follows this implementation: public interface IUserProviderComposite : IUserProvider { void RegisterProvider(Predicate<UserData> predicate, IUserProvider provider); } public class UserProviderComposite : IUserProviderComposite { public User GetUser(SomeUserData data) ... public void RegisterProvider(Predicate<UserData> predicate, IUserProvider provider) ... } Idea behind UserProviderComposite is simple. You register providers, and this class acts as a reusable entry-point. When calling GetUser, it will use whatever registered provider matches predicate for requested user data (if that helps, it stores key-value map of predicates and providers internally). Now, what confuses me is whether RegisterProvider method (brings to mind composite's add operation) should be a part of that class. It kind of expands its responsibilities from providing user to also managing providers collection. As far as my understanding goes, this violates Single Responsibility Principle... or am I wrong here? I thought about extracting register part into separate entity and inject it to the composite. As long as it looks decent on paper (in terms of SRP), it feels bit awkward because: I would be essentially injecting Dictionary (or other key-value map) ...or silly wrapper around it, doing nothing more than adding entires This won't be following composite anymore (as add won't be part of composite) What exactly is the presented pattern called? Composite felt natural to compare it with, but I realize it's not exactly the one however nothing else rings any bells. Which approach would you take - stick with SRP or stick with "composite"/pattern? Or is the design here flawed and given the problem this can be done in a better way?

    Read the article

  • When to use SOAP over REST

    So, how does REST based services differ from SOAP based services, and when should you use SOAP? Representational State Transfer (REST) implements the standard HTTP/HTTPS as an interface allowing clients to obtain access to resources based on requested URIs. An example of a URI may look like this http://mydomain.com/service/method?parameter=var1&parameter=var2. It is important to note that REST based services are stateless because http/https is natively stateless. One of the many benefits for implementing HTTP/HTTPS as an interface is can be found in caching. Caching can be done on a web service much like caching is done on requested web pages. Caching allows for reduced web server processing and increased response times because content is already processed and stored for immediate access. Typical actions performed by REST based services include generic CRUD (Create, Read, Update, and Delete) operations and operations that do not require state. Simple Object Access Protocol (SOAP) on the other hand uses a generic interface in order to transport messages. Unlike REST, SOAP can use HTTP/HTTPS, SMTP, JMS, or any other standard transport protocols. Furthermore, SOAP utilizes XML in the following ways: Define a message Defines how a message is to be processed Defines the encoding of a message Lays out procedure calls and responses As REST aligns more with a Resource View, SOAP aligns more with a Method View in that business logic is exposed as methods typically through SOAP web service because they can retain state. In addition, SOAP requests are not cached therefore every request will be processed by the server. As stated before Soap does retain state and this gives it a special advantage over REST for services that need to preform transactions where multiple calls to a service are need in order to complete a task. Additionally, SOAP is more ideal for enterprise level services that implement standard exchange formats in the form of contracts due to the fact that REST does not currently support this. A real world example of where SOAP is preferred over REST can be seen in the banking industry where money is transferred from one account to another. SOAP would allow a bank to perform a transaction on an account and if the transaction failed, SOAP would automatically retry the transaction ensuring that the request was completed. Unfortunately, with REST, failed service calls must be handled manually by the requesting application. References: Francia, S. (2010). SOAP vs. REST. Retrieved 11 20, 2011, from spf13: http://spf13.com/post/soap-vs-rest Rozlog, M. (2010). REST and SOAP: When Should I Use Each (or Both)? Retrieved 11 20, 2011, from Infoq.com: http://www.infoq.com/articles/rest-soap-when-to-use-each

    Read the article

  • How to mock a dynamic object

    - by Daniel Cazzulino
    Someone asked me how to mock a dynamic object with Moq, which might be non-obvious. Given the following interface definition: public interface IProject { string Name { get; } dynamic Data { get; } } When you try to setup the mock for the dynamic property values, you get:   What’s important to realize is that a dynamic object is just a plain object, whose properties happen to be resolved at runtime. Kinda like reflection, if you will: all public properties of whatever object happens to be the instance, will be resolved just fine at runtime. Therefore, one way to mock this dynamic is to just create an anonymous type with the properties we want, and set the dynamic property to return that:...Read full article

    Read the article

  • Mocking property sets

    In this post, i will be showing how you can mock property sets with your expected values or even action using JustMock. To begin, we have a sample interface: public interface IFoo { int Value { get; set; } } Now,  we can create a mock that will throw on any call other than the one expected, generally its a strict mock and we can do it like: bool expected = false; var foo = Mock.Create<IFoo>(BehaviorMode.Strict); Mock.ArrangeSet(() => { foo.Value = 1; }).DoInstead(() =>...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Mocking property sets

    - by mehfuzh
    In this post, i will be showing how you can mock property sets with your expected values or even action using JustMock. To begin, we have a sample interface: public interface IFoo {     int Value { get; set; } } Now,  we can create a mock that will throw on any call other than the one expected, generally its a strict mock and we can do it like: bool expected = false;  var foo = Mock.Create<IFoo>(BehaviorMode.Strict);  Mock.ArrangeSet(() => { foo.Value = 1; }).DoInstead(() => expected  = true);    foo.Value = 1;    Assert.True(expected); Here , the method for running though our expectation for set is Mock.ArrangeSet , where we can directly set our expectations or can even set matchers into it like: var foo = Mock.Create<IFoo>(BehaviorMode.Strict);   Mock.ArrangeSet(() => foo.Value = Arg.Matches<int>(x => x > 3));   foo.Value = 4; foo.Value = 5;   Assert.Throws<MockException>(() => foo.Value = 3);   In the example, any set for value not satisfying matcher expression will throw an MockException as this is a strict mock but what will be the case for loose mocks, where we also have to assert it. Here, let’s take an interface with an indexed property. Indexers are treated in the same way as properties, as with basic indexers let you access your class if it were an array. public interface IFooIndexed {     string this[int key] { get; set; } } We want to  setup a value for a particular index,  we then will pass that mock to some implementer where it will be actually called. Once done, we want to assert that if it has been invoked properly. var foo = Mock.Create<IFooIndexed>();   Mock.ArrangeSet(() => foo[0] = "ping");   foo[0] = "ping";   Mock.AssertSet(() => foo[0] = "ping"); In the above example, both the values are user defined, it might happen that we want to make it more dynamic, In this example, i set it up for set with any value and finally checked if it is set with the one i am looking for. var foo = Mock.Create<IFooIndexed>();   Mock.ArrangeSet(() => foo[0] = Arg.Any<string>());   foo[0] = "ping";   Mock.AssertSet(() => foo[0] = Arg.Matches<string>(x => string.Compare("ping", x) == 0)); This is more or less of mocking user sets , but we can further have it to throw exception or even do our own task for a particular set , like : Mock.ArrangeSet(() => foo.MyProperty = 10).Throws(new ArgumentException()); Or  bool expected = false;  var foo = Mock.Create<IFoo>(BehaviorMode.Strict);  Mock.ArrangeSet(() => { foo.Value = 1; }).DoInstead(() => expected  = true);    foo.Value = 1;    Assert.True(expected); Or call the original setter , in this example it will throw an NotImplementedExpectation var foo = Mock.Create<FooAbstract>(BehaviorMode.Strict); Mock.ArrangeSet(() => { foo.Value = 1; }).CallOriginal(); Assert.Throws<NotImplementedException>(() => { foo.Value = 1; });   Finally, try all these, find issues, post them to forum and make it work for you :-). Hope that helps,

    Read the article

  • Mocking property sets

    In this post, i will be showing how you can mock property sets with your expected values or even action using JustMock. To begin, we have a sample interface: public interface IFoo { int Value { get; set; } } Now,  we can create a mock that will throw on any call other than the one expected, generally its a strict mock and we can do it like: bool expected = false; var foo = Mock.Create<IFoo>(BehaviorMode.Strict); Mock.ArrangeSet(() => { foo.Value = 1; }).DoInstead(() =>...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • How do I reconfigure my GLES frame buffer after a rotation?

    - by Panda Pajama
    I am implementing interface rotation for my GLES based game for iOS, written in Xamarin.iOS with OpenTK. I am detecting the rotation by overriding WillRotate, in my UIViewController, and I correctly re-setup all of my projection matrices. However, when drawing a sprite, the image looks a bit blurrier on the landscape version compared to the portrait version, as you can see in the following closeups magnified 10x. Portrait (before rotating) Landscape (after rotating) In both cases, I'm using the same texture with the same sampler, the same shader, and the same GL state. I just changed the order of the parameters in the projection matrix, so the resulting sizes should be exactly the same pixelwise. Since this could be thought of as a window resize, I suppose that the framebuffer has to be recreated to the new size. When working on desktop apps on Direct3D11 (SharpDX), I would have to call swapChain.ResizeBuffers() to do this. I have tried setting AutoResize = true in my iPhoneOSGameView, but then the framebuffer gets clipped as I rotate the interface, and then everything disappears when rotating the interface again. I'm not doing anything strange, my framebuffer initialization is pretty vanilla: int scaling = (int)UIScreen.MainScreen.Scale; DeviceWidth = (int)UIScreen.MainScreen.Bounds.Width * scaling; DeviceHeight = (int)UIScreen.MainScreen.Bounds.Height * scaling; Size = new System.Drawing.Size((int)(DeviceWidth), (int)(DeviceHeight)); Bounds = new System.Drawing.RectangleF(0, 0, DeviceWidth, DeviceHeight); Frame = new System.Drawing.RectangleF(0, 0, DeviceWidth, DeviceHeight); ContextRenderingApi = EAGLRenderingAPI.OpenGLES2; AutoResize = true; LayerRetainsBacking = true; LayerColorFormat = EAGLColorFormat.RGBA8; I get inconsistent results when changing Size, Bounds and Frame on my CreateFrameBuffer override, but since the documentation is so incomplete (it has nothing on Bounds and Frame), I have resorted to randomly changing stuff here and there without really knowing what is going on. There is a similar question which has no answers. However, I don't know if they're experiencing the same problem as I am. Is my supposition that recreating the framebuffer is necessary, correct? If so, does anybody know how to do it correctly in OpenTK for Xamarin.iOS?

    Read the article

  • Basic WCF Unit Testing

    - by Brian
    Coming from someone who loves the KISS method, I was surprised to find that I was making something entirely too complicated. I know, shocker right? Now I'm no unit testing ninja, and not really a WCF ninja either, but had a desire to test service calls without a) going to a database, or b) making sure that the entire WCF infrastructure was tip top. Who does? It's not the environment I want to test, just the logic I’ve written to ensure there aren't any side effects. So, for the K.I.S.S. method: Assuming that you're using a WCF service library (you are using service libraries correct?), it's really as easy as referencing the service library, then building out some stubs for bunking up data. The service contract We’ll use a very basic service contract, just for getting and updating an entity. I’ve used the default “CompositeType” that is in the template, handy only for examples like this. I’ve added an Id property and overridden ToString and Equals. [ServiceContract] public interface IMyService { [OperationContract] CompositeType GetCompositeType(int id); [OperationContract] CompositeType SaveCompositeType(CompositeType item); [OperationContract] CompositeTypeCollection GetAllCompositeTypes(); } The implementation When I implement the service, I want to be able to send known data into it so I don’t have to fuss around with database access or the like. To do this, I first have to create an interface for my data access: public interface IMyServiceDataManager { CompositeType GetCompositeType(int id); CompositeType SaveCompositeType(CompositeType item); CompositeTypeCollection GetAllCompositeTypes(); } For the purposes of this we can ignore our implementation of the IMyServiceDataManager interface inside of the service. Pretend it uses LINQ to Entities to map its data, or maybe it goes old school and uses EntLib to talk to SQL. Maybe it talks to a tape spool on a mainframe on the third floor. It really doesn’t matter. That’s the point. So here’s what our service looks like in its most basic form: public CompositeType GetCompositeType(int id) { //sanity checks if (id == 0) throw new ArgumentException("id cannot be zero."); return _dataManager.GetCompositeType(id); } public CompositeType SaveCompositeType(CompositeType item) { return _dataManager.SaveCompositeType(item); } public CompositeTypeCollection GetAllCompositeTypes() { return _dataManager.GetAllCompositeTypes(); } But what about the datamanager? The constructor takes care of that. I don’t want to expose any testing ability in release (or the ability for someone to swap out my datamanager) so this is what we get: IMyServiceDataManager _dataManager; public MyService() { _dataManager = new MyServiceDataManager(); } #if DEBUG public MyService(IMyServiceDataManager dataManager) { _dataManager = dataManager; } #endif The Stub Now it’s time for the rubber to meet the road… Like most guys that ever talk about unit testing here’s a sample that is painting in *very* broad strokes. The important part however is that within the test project, I’ve created a bunk (unit testing purists would say stub I believe) object that implements my IMyServiceDataManager so that I can deal with known data. Here it is: internal class FakeMyServiceDataManager : IMyServiceDataManager { internal FakeMyServiceDataManager() { Collection = new CompositeTypeCollection(); Collection.AddRange(new CompositeTypeCollection { new CompositeType { Id = 1, BoolValue = true, StringValue = "foo 1", }, new CompositeType { Id = 2, BoolValue = false, StringValue = "foo 2", }, new CompositeType { Id = 3, BoolValue = true, StringValue = "foo 3", }, }); } CompositeTypeCollection Collection { get; set; } #region IMyServiceDataManager Members public CompositeType GetCompositeType(int id) { if (id <= 0) return null; return Collection.SingleOrDefault(m => m.Id == id); } public CompositeType SaveCompositeType(CompositeType item) { var existing = Collection.SingleOrDefault(m => m.Id == item.Id); if (null != existing) { Collection.Remove(existing); } if (item.Id == 0) { item.Id = Collection.Count > 0 ? Collection.Max(m => m.Id) + 1 : 1; } Collection.Add(item); return item; } public CompositeTypeCollection GetAllCompositeTypes() { return Collection; } #endregion } So it’s tough to see in this example why any of this is necessary, but in a real world application you would/should/could be applying much more logic within your service implementation. This all serves to ensure that between refactorings etc, that it doesn’t send sparking cogs all about or let the blue smoke out. Here’s a simple test that brings it all home, remember, broad strokes: [TestMethod] public void MyService_GetCompositeType_ExpectedValues() { FakeMyServiceDataManager fake = new FakeMyServiceDataManager(); MyService service = new MyService(fake); CompositeType expected = fake.GetCompositeType(1); CompositeType actual = service.GetCompositeType(2); Assert.AreEqual<CompositeType>(expected, actual, "Objects are not equal. Expected: {0}; Actual: {1};", expected, actual); } Summary That’s really all there is to it. You could use software x or framework y to do the exact same thing, but in my case I just didn’t really feel like it. This speaks volumes to my not yet ninja unit testing prowess.

    Read the article

  • CISCO 2911 Router configuration

    - by bala
    Device cisco 2911 router configuration support is required please. I have exchange server 2010 configured and working without any errors the problem is in cisco router configuration when exchange server sends emails out the receives WAN IP not the public ip. I have configured RDNS lookups with our MX record IP addesses that match the FQDN but all our emails are rejected because it does not match with the public ip. Receiving mails problem is not an problem all mails are coming through. i am sure i am missing something on the router configuration that does not sends the public ip, can any one help me to solve this issue. Note; I've got 1 WAN IP & 8 Public IP from ISP . Find below the running configuration. Building configuration... Current configuration : 2734 bytes ! ! Last configuration change at 06:32:13 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BSBG-LL ! boot-start-marker boot-end-marker ! ! enable secret 5 $x$xHrxxxxx5ox0 enable password 7 xx23xx5FxxE1xx044 ! no aaa new-model ! no ipv6 cef ip source-route ip cef ! ! ! ! ! ip flow-cache timeout active 1 ip domain name yourdomain.com ip name-server 213.42.20.20 ip name-server 195.229.241.222 multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO2911/K9 ! ! username bsbg ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.0.9 255.255.255.0 ip flow ingress ip nat inside ip virtual-reassembly in duplex auto speed 100 no cdp enable ! interface GigabitEthernet0/1 ip address 213.42.xx.x2 255.255.255.252 ip nat outside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 120 interface GigabitEthernet0/1 overload ip nat inside source static tcp 192.168.0.4 25 94.56.89.100 25 extendable ip nat inside source static tcp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static udp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static tcp 192.168.0.4 110 94.56.89.100 110 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.100 443 extendable ip nat inside source static tcp 192.168.0.4 587 94.56.89.100 587 extendable ip nat inside source static tcp 192.168.0.4 995 94.56.89.100 995 extendable ip nat inside source static tcp 192.168.0.4 3389 94.56.89.100 3389 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.101 443 extendable ip nat inside source static tcp 192.168.0.12 80 94.56.89.102 80 extendable ip nat inside source static tcp 192.168.0.12 443 94.56.89.102 443 extendable ip nat inside source static tcp 192.168.0.12 3389 94.56.89.102 3389 extendable ip route 0.0.0.0 0.0.0.0 213.42.69.41 ! access-list 120 permit ip 192.168.0.0 0.0.0.255 any ! ! ! control-plane ! ! ! line con 0 exec-timeout 5 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 password 7 xx64xxD530D26086Dxx login transport input all ! scheduler allocate 20000 1000 end

    Read the article

  • External USB 3 drive not recognized

    - by ilan123
    Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

    Read the article

  • Can't get Wireless RT2x00usb driver to work, and can't blacklist it

    - by TheLQ
    After a two year hiatus to Linux, I try it again out again. And then I run into to driver issues... I have an old Linksys WUSB54G v4 Wireless USB Adapter. In previous versions I had to use a combination of Ndiswrapper and Wicd to hope of getting it working. In 10.10, apparently there are built in drivers for it. Unfortunately they don't work. Fails to connect to my WPA network, fails to connect to my open unencrypted network. Wicd fails at "Obtaining IP address" or when using static IPs fails at verifying connectivity to network. Getting fed up I tried the ndiswrapper approach. Installed and configured, but still not working, even when blacklisting the rt2570 module. So for some debugging I added some lines to my /etc/modprobe.d/blacklist.conf file blacklist rt2570 blacklist prism54usb blacklist rt2x00lib blacklist rt2x00usb Restart and find this: lordquackstar@quackbeast:/etc/modprobe.d$ lsmod | grep rt2 rt2500usb 18049 0 rt2x00usb 9779 1 rt2500usb rt2x00lib 27275 2 rt2500usb,rt2x00usb led_class 2633 1 rt2x00lib mac80211 231541 2 rt2x00usb,rt2x00lib cfg80211 144470 2 rt2x00lib,mac80211 Seems to be ignored... Tried this: lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00usb ERROR: Removing 'rt2x00usb': Resource temporarily unavailable lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00lib ERROR: Removing 'rt2x00lib': Resource temporarily unavailable and couldn't connect. Restarted and was back to the same modules loading. Maybe there's something in the log: lordquackstar@quackbeast:/etc/modprobe.d$ tail -n100000 /var/log/syslog | grep rt2 Dec 13 19:01:15 quackbeast kernel: [ 23.698056] Registered led device: rt2500usb-phy0::radio Dec 13 19:01:15 quackbeast kernel: [ 23.698140] Registered led device: rt2500usb-phy0::quality Dec 13 19:01:15 quackbeast kernel: [ 23.701680] usbcore: registered new interface driver rt2500usb Dec 13 19:01:15 quackbeast NetworkManager[855]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Dec 13 19:17:47 quackbeast kernel: [ 23.521759] Registered led device: rt2500usb-phy0::radio Dec 13 19:17:47 quackbeast kernel: [ 23.521824] Registered led device: rt2500usb-phy0::quality Dec 13 19:17:47 quackbeast kernel: [ 23.524740] usbcore: registered new interface driver rt2500usb Dec 13 19:17:47 quackbeast NetworkManager[798]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Seems to be autoloading. So this means that even if I pull it out, remove the module, and get it working, it still won't work when its plugged in all the time. More info: lordquackstar@quackbeast:/etc/modprobe.d$ sudo lshw -C Network *SNIP* *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:12:17:9b:f3:1e capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=2.6.35-24-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg USB: lordquackstar@quackbeast:/etc/modprobe.d$ lsusb | grep -i rt Bus 001 Device 003: ID 13b1:000d Linksys WUSB54G v4 802.11g Adapter [Ralink RT2500USB] Any suggestions on how to either fix the rt2x00usb driver or permanently block it from loading? Note that I already have ndiswrapper installed

    Read the article

  • Make Your Menu Item Highlighted

    - by Shaun
    When I was working on the TalentOn project (Promotion in MSDN Chinese) I was asked to implement a functionality that makes the top menu items highlighted when the currently viewing page was in that section. This might be a common scenario in the web application development I think.   Simple Example When thinking about the solution of the highlighted menu items the biggest problem would be how to define the sections (menu item) and the pages it belongs to rather than making the menu highlighted. With the ASP.NET MVC framework we can use the controller – action infrastructure for us to achieve it. Each controllers would have a related menu item on the master page normally. The menu item would be highlighted if any of the views under this controller are being shown. Some specific menu items would be highlighted of that action was invoked, for example the home page, the about page, etc. The check rule can be specified on-demand. For example I can define the action LogOn and Register of Account controller should make the Account menu item highlighted while the ChangePassword should make the Profile menu item highlighted. I’m going to use the HtmlHelper to render the highlight-able menu item. The key point is that I need to pass the predication to check whether the current view belongs to this menu item which means this menu item should be highlighted or not. Hence I need a delegate as its parameter. The simplest code would be like this. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: using System.Web.Mvc.Html; 7:  8: namespace ShaunXu.Blogs.HighlighMenuItem 9: { 10: public static class HighlightMenuItemHelper 11: { 12: public static MvcHtmlString HighlightMenuItem(this HtmlHelper helper, 13: string text, string controllerName, string actionName, object routeData, object htmlAttributes, 14: string highlightText, object highlightHtmlAttributes, 15: Func<HtmlHelper, bool> highlightPredicate) 16: { 17: var shouldHighlight = highlightPredicate.Invoke(helper); 18: if (shouldHighlight) 19: { 20: return helper.ActionLink(string.IsNullOrWhiteSpace(highlightText) ? text : highlightText, 21: actionName, controllerName, routeData, highlightHtmlAttributes == null ? htmlAttributes : highlightHtmlAttributes); 22: } 23: else 24: { 25: return helper.ActionLink(text, actionName, controllerName, routeData, htmlAttributes); 26: } 27: } 28: } 29: } There are 3 groups of the parameters: the first group would be the same as the in-build ActionLink method parameters. It has the link text, controller name and action name, etc passed in so that I can render a valid linkage for the menu item. The second group would be more focus on the highlight link text and Html attributes. I will use them to render the highlight menu item. The third group, which contains one parameter, would be a predicate that tells me whether this menu item should be highlighted or not based on the user’s definition. And then I changed my master page of the sample MVC application. I let the Home and About menu highlighted only when the Index and About action are invoked. And I added a new menu named Account which should be highlighted for all actions/views under its Account controller. So my master would be like this. 1: <div id="menucontainer"> 2:  3: <ul id="menu"> 4: <li><% 1: : Html.HighlightMenuItem( 2: "Home", "Home", "Index", null, null, 3: "[Home]", null, 4: helper => helper.ViewContext.RouteData.Values["controller"].ToString() == "Home" 5: && helper.ViewContext.RouteData.Values["action"].ToString() == "Index")%></li> 5:  6: <li><% 1: : Html.HighlightMenuItem( 2: "About", "Home", "About", null, null, 3: "[About]", null, 4: helper => helper.ViewContext.RouteData.Values["controller"].ToString() == "Home" 5: && helper.ViewContext.RouteData.Values["action"].ToString() == "About")%></li> 7:  8: <li><% 1: : Html.HighlightMenuItem( 2: "Account", "Account", "LogOn", null, null, 3: "[Account]", null, 4: helper => helper.ViewContext.RouteData.Values["controller"].ToString() == "Account")%></li> 9: 10: </ul> 11:  12: </div> Note: You need to add the import section for the namespace “ShaunXu.Blogs.HighlighMenuItem” to make the extension method I created below available. So let’s see the result. When the home page was shown the Home menu was highlighted since at this moment it was controller = Home and action = Index. And if I clicked the About menu you can see it turned highlighted as now the action was About. And if I navigated to the register page the Account menu was highlighted since it should be like that when any actions under the Account controller was invoked.   Fluently Language Till now it’s a fully example for the highlight menu item but not perfect yet. Since the most common scenario would be: highlighted when the action invoked, or highlighted when any action was invoked under this controller, we can created 2 shortcut method so for them so that normally the developer will be no need to specify the delegation. Another place we can improve would be, to make the method more user-friendly, or I should say developer-friendly. As you can see when we want to add a highlight menu item we need to specify 8 parameters and we need to remember what they mean. In fact we can make the method more “fluently” so that the developer can have the hints when using it by the Visual Studio IntelliSense. Below is the full code for it. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: using System.Web.Mvc.Html; 7:  8: namespace Ethos.Xrm.HR 9: { 10: #region Helper 11:  12: public static class HighlightActionMenuHelper 13: { 14: public static IHighlightActionMenuProviderAfterCreated HighlightActionMenu(this HtmlHelper helper) 15: { 16: return new HighlightActionMenuProvider(helper); 17: } 18: } 19:  20: #endregion 21:  22: #region Interfaces 23:  24: public interface IHighlightActionMenuProviderAfterCreated 25: { 26: IHighlightActionMenuProviderAfterOn On(string actionName, string controllerName); 27: } 28:  29: public interface IHighlightActionMenuProviderAfterOn 30: { 31: IHighlightActionMenuProviderAfterWith With(string text, object routeData, object htmlAttributes); 32: } 33:  34: public interface IHighlightActionMenuProviderAfterWith 35: { 36: IHighlightActionMenuProviderAfterHighlightWhen HighlightWhen(Func<HtmlHelper, bool> predicate); 37: IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerMatch(); 38: IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerAndActionMatch(); 39: } 40:  41: public interface IHighlightActionMenuProviderAfterHighlightWhen 42: { 43: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes, string highlightText); 44: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes); 45: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass, string highlightText); 46: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass); 47: } 48:  49: public interface IHighlightActionMenuProviderAfterApplyHighlightStyle 50: { 51: MvcHtmlString ToActionLink(); 52: } 53:  54: #endregion 55:  56: public class HighlightActionMenuProvider : 57: IHighlightActionMenuProviderAfterCreated, 58: IHighlightActionMenuProviderAfterOn, IHighlightActionMenuProviderAfterWith, 59: IHighlightActionMenuProviderAfterHighlightWhen, IHighlightActionMenuProviderAfterApplyHighlightStyle 60: { 61: private HtmlHelper _helper; 62:  63: private string _controllerName; 64: private string _actionName; 65: private string _text; 66: private object _routeData; 67: private object _htmlAttributes; 68:  69: private Func<HtmlHelper, bool> _highlightPredicate; 70:  71: private string _highlightText; 72: private object _highlightHtmlAttributes; 73:  74: public HighlightActionMenuProvider(HtmlHelper helper) 75: { 76: _helper = helper; 77: } 78:  79: public IHighlightActionMenuProviderAfterOn On(string actionName, string controllerName) 80: { 81: _actionName = actionName; 82: _controllerName = controllerName; 83: return this; 84: } 85:  86: public IHighlightActionMenuProviderAfterWith With(string text, object routeData, object htmlAttributes) 87: { 88: _text = text; 89: _routeData = routeData; 90: _htmlAttributes = htmlAttributes; 91: return this; 92: } 93:  94: public IHighlightActionMenuProviderAfterHighlightWhen HighlightWhen(Func<HtmlHelper, bool> predicate) 95: { 96: _highlightPredicate = predicate; 97: return this; 98: } 99:  100: public IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerMatch() 101: { 102: return HighlightWhen((helper) => 103: { 104: return helper.ViewContext.RouteData.Values["controller"].ToString().ToLower() == _controllerName.ToLower(); 105: }); 106: } 107:  108: public IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerAndActionMatch() 109: { 110: return HighlightWhen((helper) => 111: { 112: return helper.ViewContext.RouteData.Values["controller"].ToString().ToLower() == _controllerName.ToLower() && 113: helper.ViewContext.RouteData.Values["action"].ToString().ToLower() == _actionName.ToLower(); 114: }); 115: } 116:  117: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes, string highlightText) 118: { 119: _highlightText = highlightText; 120: _highlightHtmlAttributes = highlightHtmlAttributes; 121: return this; 122: } 123:  124: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes) 125: { 126: return ApplyHighlighStyle(highlightHtmlAttributes, _text); 127: } 128:  129: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass, string highlightText) 130: { 131: return ApplyHighlighStyle(new { @class = cssClass }, highlightText); 132: } 133:  134: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass) 135: { 136: return ApplyHighlighStyle(new { @class = cssClass }, _text); 137: } 138:  139: public MvcHtmlString ToActionLink() 140: { 141: if (_highlightPredicate.Invoke(_helper)) 142: { 143: // should be highlight 144: return _helper.ActionLink(_highlightText, _actionName, _controllerName, _routeData, _highlightHtmlAttributes); 145: } 146: else 147: { 148: // should not be highlight 149: return _helper.ActionLink(_text, _actionName, _controllerName, _routeData, _htmlAttributes); 150: } 151: } 152: } 153: } So in the master page when I need the highlight menu item I can “tell” the helper how it should be, just like this. 1: <li> 2: <% 1: : Html.HighlightActionMenu() 2: .On("Index", "Home") 3: .With(SiteMasterStrings.Home, null, null) 4: .HighlightWhenControllerMatch() 5: .ApplyHighlighStyle(new { style = "background:url(../../Content/Images/topmenu_bg.gif) repeat-x;text-decoration:none;color:#feffff;" }) 6: .ToActionLink() %> 3: </li> While I’m typing the code the IntelliSense will advise me that I need a highlight action menu, on the Index action of the Home controller, with the “Home” as its link text and no need the additional route data and Html attributes, and it should be highlighted when the controller was “Home”, and if it’s highlighted the style should be like this and finally render it to me. This is something we call “Fluently Language”. If you had been using Moq you will see that’s very development-friendly, document-ly and easy to read.   Summary In this post I demonstrated how to implement a highlight menu item in ASP.NET MVC by using its controller – action infrastructure. We can see the ASP.NET MVC helps us to organize our web application better. And then I also told a little bit more on the “Fluently Language” and showed how it will make our code better and easy to be used.   Hope this helps, Shaun   All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • Updating scene graph in multithreaded game

    - by user782220
    In a game with a render thread and a game logic thread the game logic thread needs to update the scene graph used by the render thread. I've read about ideas such as a queue of updates. Can someone describe to a newbie at scene graphs what kind of interface the scene graph exports. Presumably it would be rather complicated. So then how does a queue of updates get implemented in C++ in a way that can handle the complexity of the interface of the scene graph while also being type safe and efficient. Again I'm a newbie at scene graphs and C++.

    Read the article

  • A Look Inside JSR 360 - CLDC 8

    - by Roger Brinkley
    If you didn't notice during JavaOne the Java Micro Edition took a major step forward in its consolidation with Java Standard Edition when JSR 360 was proposed to the JCP community. Over the last couple of years there has been a focus to move Java ME back in line with it's big brother Java SE. We see evidence of this in JCP itself which just recently merged the ME and SE/EE Executive Committees into a single Java Executive Committee. But just before that occurred JSR 360 was proposed and approved for development on October 29. So let's take a look at what changes are now being proposed. In a way JSR 360 is returning back to the original roots of Java ME when it was first introduced. It was indeed a subset of the JDK 4 language, but as Java progressed many of the language changes were not implemented in the Java ME. Back then the tradeoff was still a functionality, footprint trade off but the major market was feature phones. Today the market has changed and CLDC, while it will still target feature phones, will have it primary emphasis on embedded devices like wireless modules, smart meters, health care monitoring and other M2M devices. The major changes will come in three areas: language feature changes, library changes, and consolidating the Generic Connection Framework.  There have been three Java SE versions that have been implemented since JavaME was first developed so the language feature changes can be divided into changes that came in JDK 5 and those in JDK 7, which mostly consist of the project Coin changes. There were no language changes in JDK 6 but the changes from JDK 5 are: Assertions - Assertions enable you to test your assumptions about your program. For example, if you write a method that calculates the speed of a particle, you might assert that the calculated speed is less than the speed of light. In the example code below if the interval isn't between 0 and and 1,00 the an error of "Invalid value?" would be thrown. private void setInterval(int interval) { assert interval > 0 && interval <= 1000 : "Invalid value?" } Generics - Generics add stability to your code by making more of your bugs detectable at compile time. Code that uses generics has many benefits over non-generic code with: Stronger type checks at compile time. Elimination of casts. Enabling programming to implement generic algorithms. Enhanced for Loop - the enhanced for loop allows you to iterate through a collection without having to create an Iterator or without having to calculate beginning and end conditions for a counter variable. The enhanced for loop is the easiest of the new features to immediately incorporate in your code. In this tip you will see how the enhanced for loop replaces more traditional ways of sequentially accessing elements in a collection. void processList(Vector<string> list) { for (String item : list) { ... Autoboxing/Unboxing - This facility eliminates the drudgery of manual conversion between primitive types, such as int and wrapper types, such as Integer.  Hashtable<Integer, string=""> data = new Hashtable<>(); void add(int id, String value) { data.put(id, value); } Enumeration - Prior to JDK 5 enumerations were not typesafe, had no namespace, were brittle because they were compile time constants, and provided no informative print values. JDK 5 added support for enumerated types as a full-fledged class (dubbed an enum type). In addition to solving all the problems mentioned above, it allows you to add arbitrary methods and fields to an enum type, to implement arbitrary interfaces, and more. Enum types provide high-quality implementations of all the Object methods. They are Comparable and Serializable, and the serial form is designed to withstand arbitrary changes in the enum type. enum Season {WINTER, SPRING, SUMMER, FALL}; } private Season season; void setSeason(Season newSeason) { season = newSeason; } Varargs - Varargs eliminates the need for manually boxing up argument lists into an array when invoking methods that accept variable-length argument lists. The three periods after the final parameter's type indicate that the final argument may be passed as an array or as a sequence of arguments. Varargs can be used only in the final argument position. void warning(String format, String... parameters) { .. for(String p : parameters) { ...process(p);... } ... } Static Imports -The static import construct allows unqualified access to static members without inheriting from the type containing the static members. Instead, the program imports the members either individually or en masse. Once the static members have been imported, they may be used without qualification. The static import declaration is analogous to the normal import declaration. Where the normal import declaration imports classes from packages, allowing them to be used without package qualification, the static import declaration imports static members from classes, allowing them to be used without class qualification. import static data.Constants.RATIO; ... double r = Math.cos(RATIO * theta); Annotations - Annotations provide data about a program that is not part of the program itself. They have no direct effect on the operation of the code they annotate. There are a number of uses for annotations including information for the compiler, compiler-time and deployment-time processing, and run-time processing. They can be applied to a program's declarations of classes, fields, methods, and other program elements. @Deprecated public void clear(); The language changes from JDK 7 are little more familiar as they are mostly the changes from Project Coin: String in switch - Hey it only took us 18 years but the String class can be used in the expression of a switch statement. Fortunately for us it won't take that long for JavaME to adopt it. switch (arg) { case "-data": ... case "-out": ... Binary integral literals and underscores in numeric literals - Largely for readability, the integral types (byte, short, int, and long) can also be expressed using the binary number system. and any number of underscore characters (_) can appear anywhere between digits in a numerical literal. byte flags = 0b01001111; long mask = 0xfff0_ff08_4fff_0fffl; Multi-catch and more precise rethrow - A single catch block can handle more than one type of exception. In addition, the compiler performs more precise analysis of rethrown exceptions than earlier releases of Java SE. This enables you to specify more specific exception types in the throws clause of a method declaration. catch (IOException | InterruptedException ex) { logger.log(ex); throw ex; } Type Inference for Generic Instance Creation - Otherwise known as the diamond operator, the type arguments required to invoke the constructor of a generic class can be replaced with an empty set of type parameters (<>) as long as the compiler can infer the type arguments from the context.  map = new Hashtable<>(); Try-with-resource statement - The try-with-resources statement is a try statement that declares one or more resources. A resource is an object that must be closed after the program is finished with it. The try-with-resources statement ensures that each resource is closed at the end of the statement.  try (DataInputStream is = new DataInputStream(...)) { return is.readDouble(); } Simplified varargs method invocation - The Java compiler generates a warning at the declaration site of a varargs method or constructor with a non-reifiable varargs formal parameter. Java SE 7 introduced a compiler option -Xlint:varargs and the annotations @SafeVarargs and @SuppressWarnings({"unchecked", "varargs"}) to supress these warnings. On the library side there are new features that will be added to satisfy the language requirements above and some to improve the currently available set of APIs.  The library changes include: Collections update - New Collection, List, Set and Map, Iterable and Iteratator as well as implementations including Hashtable and Vector. Most of the work is too support generics String - New StringBuilder and CharSequence as well as a Stirng formatter. The javac compiler  now uses the the StringBuilder instead of String Buffer. Since StringBuilder is synchronized there is a performance increase which has necessitated the wahat String constructor works. Comparable interface - The comparable interface works with Collections, making it easier to reuse. Try with resources - Closeable and AutoCloseable Annotations - While support for Annotations is provided it will only be a compile time support. SuppressWarnings, Deprecated, Override NIO - There is a subset of NIO Buffer that have been in use on the of the graphics packages and needs to be pulled in and also support for NIO File IO subset. Platform extensibility via Service Providers (ServiceLoader) - ServiceLoader interface dos late bindings of interface to existing implementations. It helpe to package an interface and behavior of the implementation at a later point in time.Provider classes must have a zero-argument constructor so that they can be instantiated during loading. They are located and instantiated on demand and are identified via a provider-configuration file in the METAINF/services resource directory. This is a mechansim from Java SE. import com.XYZ.ServiceA; ServiceLoader<ServiceA> sl1= new ServiceLoader(ServiceA.class); Resources: META-INF/services/com.XYZ.ServiceA: ServiceAProvider1 ServiceAProvider2 ServiceAProvider3 META-INF/services/ServiceB: ServiceBProvider1 ServiceBProvider2 From JSR - I would rather use this list I think The Generic Connection Framework (GCF) was previously specified in a number of different JSRs including CLDC, MIDP, CDC 1.2, and JSR 197. JSR 360 represents a rare opportunity to consolidated and reintegrate parts that were duplicated in other specifications into a single specification, upgrade the APIs as well provide new functionality. The proposal is to specify a combined GCF specification that can be used with Java ME or Java SE and be backwards compatible with previous implementations. Because of size limitations as well as the complexity of the some features like InvokeDynamic and Unicode 6 will not be included. Additionally, any language or library changes in JDK 8 will be not be included. On the upside, with all the changes being made, backwards compatibility will still be maintained. JSR 360 is a major step forward for Java ME in terms of platform modernization, language alignment, and embedded support. If you're interested in following the progress of this JSR see the JSR's java.net project for details of the email lists, discussions groups.

    Read the article

  • How to create a KDE start application menu launcher that launches the search and launch desktop?

    - by davorao
    Now i love the plasma-netbook aka the "search and launch" interface but i would want to be able to have it appear on demand and not sit as the desktop default in the back of my windows. So what i imagine is having a application launcher be created which on activation brings up the "search and launch" feature allowing for easy access of your favorites or have that slick interface to find what your looking for. I'm aware that krunner solves a similar use-case but search and launch would be more of an Unity Dash type of search, whereas krunner is more useful when u exactly know what your looking for. And to summarize my question, since I'm clueless as to how this would be done, I'm lookinf for someone who could tell me how hard it would be to do it.

    Read the article

  • How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8

    - by Chris Hoffman
    If you don’t have a touchscreen computer and spend all your time on the desktop, Windows 8’s new interface can seem intrusive. Microsoft won’t allow you to disable the new interface, but Classic Shell provides the options Microsoft didn’t. In addition to providing a Start button, Classic Shell can take you straight to the desktop when you log in and disable the hot corners that activate the charms and metro app switcher. There are other programs that do this, but Classic Shell is free and open-source. Many of the alternatives, such as Start8 and RetroUI, are commercial apps that cost money. We’ve covered Classic Shell in the past, but it’s come a long way since then. How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

    Read the article

  • Intel Centrino Wireless N 1000 doesn't work on a Lenovo Z560

    - by Timetraveler
    I upgraded my Ubuntu 11.04 to 11.10 and my Wifi has stopped working. I have a Lenovo Z560 that has Intel centrino wireless-N 1000. I have searched various threads having similar problems for a solution and have no success. The wlan0 is not even showing up in rfkill. Please help me find a solution. I am giving below the output of various debug commands. Thanks in advance. DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" ----##uname -a Linux gurucharapathy-laptop 3.0.0-17-generic-pae #30-Ubuntu SMP Thu Mar 8 17:53:35 UTC 2012 i686 i686 i386 GNU/Linux ----##lspci -nnk | grep -iA2 net 05:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0084] Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN [8086:1315] Kernel modules: iwlagn 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 ----##iwconfig lo no wireless extensions. eth0 no wireless extensions. ----##iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. ----##rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no ----##lsmod Module Size Used by rfcomm 38408 8 bnep 17923 2 parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 snd_hda_codec_hdmi 31426 1 snd_hda_codec_conexant 52460 1 uvcvideo 67271 0 videodev 85626 1 uvcvideo snd_hda_intel 28358 2 snd_hda_codec 91859 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec joydev 17393 0 snd_pcm 80435 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 i915 509554 9 drm_kms_helper 32889 1 i915 snd_rawmidi 25241 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28932 2 snd_pcm,snd_seq drm 196290 5 i915,drm_kms_helper snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq mei 36466 0 mac80211 393421 0 snd 55902 14 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 13575 0 intel_ips 17753 0 btusb 18160 2 i2c_algo_bit 13199 1 i915 soundcore 12600 1 snd bluetooth 148839 23 rfcomm,bnep,btusb cfg80211 172427 1 mac80211 psmouse 63474 0 serio_raw 12990 0 snd_page_alloc 14108 2 snd_hda_intel,snd_pcm sparse_keymap 13658 1 ideapad_laptop wmi 18744 0 video 18908 1 i915 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp ahci 21634 2 libahci 25761 1 ahci r8169 47200 0 ----##nm-tool NetworkManager Tool State: asleep Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: r8169 State: unmanaged Default: no HW Address: 88:AE:1D:DE:5F:9C Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on ----##lshw -C network *-network UNCLAIMED description: Network controller product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d6400000-d6401fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 02 serial: 88:ae:1d:de:5f:9c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.0.100 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d2410000-d2410fff memory:d2400000-d240ffff memory:d2420000-d243ffff

    Read the article

  • Can't connect to WIFI after sleep Ubuntu 14.04

    - by user3380404
    After an upgrade over a previous version to Ubuntu 14.04 I have problems with connecting to WiFi. After suspending it won't reconnect to any existing network unless I restart the laptop. sudo lshw -C network: *-network description: Ethernet interface product: 82567LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:27:13:b4:d3:58 capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=1.8-3 latency=0 link=no multicast=yes port=twisted pair resources: irq:45 memory:fc200000-fc21ffff memory:fc225000-fc225fff ioport:1840(size=32) *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:c6:6b:c8 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-29-generic firmware=8.83.5.1 build 33692 ip=10.0.1.160 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:48 memory:f4200000-f4201fff

    Read the article

  • blurry lines between web application context layer, service layer and data access layer in spring

    - by thenaglecode
    I Originally asked this question in SO but on advice I have moved the question here... I'll admit I'm a spring newbie, but you can correct me if I'm wrong, this one liner looks kinda fishy in a best practices sort of way: @RepositoryRestResource(collectionResourceRel="people"...) public interface PersonRepository extends PagingAndSortingRepository<Person, Long> For those who are unaware, the following does many things: It is an interface definition that can be registered in an application context as a jpa repository, automagically hooking up all the default CRUD operations within a persistence context (that is externally configured). and also configures default controller/request-mapping/handler functionality at the namespace "/people" relative to your configured dispatcher servlet-mapping. Here's my point. I just crossed 3 conceptual layers with one line of code! this feels against my seperation-of-concern instincts but i wanted to hear your opinion. And for the sake of being on a question and answer site, I would like to know whether there is a better way of seperating these different layers - Service, Data, Controllers - whilst maintaining as minimal configuration as possible

    Read the article

  • What Extends JComponent?

    - by Geertjan
    Let NetBeans IDE tell you what extends JComponent: Thanks to Damian from Gdansk in Poland who left a comment in this blog yesterday that explains how to achieve the above: "Let's say you would like to find all implementations of TreeModel interface. I found today an answer: r-click on class/interface -> chose Navigate->Inspect Hierarchy->select second filter at the bottom of opened window or press Alt+Shift+F12 and then Alt+B." In the list above, double-click an item to open it in the NetBeans Java editor. Handy tip, dziekuje bardzo, Damian.

    Read the article

  • Why should I use List<T> over IEnumerable<T>?

    - by Rowan Freeman
    In my ASP.net MVC4 web application I use IEnumerables, trying to follow the mantra to program to the interface, not the implementation. Return IEnumerable(Of Student) vs Return New List(Of Student) People are telling me to use List and not IEnumerable, because lists force the query to be executed and IEumerable does not. Is this really best practice? Is there any alternative? I feel strange using concrete objects where an interface could be used. Is my strange feeling justified?

    Read the article

  • Oracle Service Cloud May 2014 Release – Focus on your driving by JP Saunders

    - by Tuula Fai
    The next time you’re twiddling dials on your car’s dashboard to get the air to blow in the right direction, and the right song to play on the stereo, while pulling on the wires to charge your phone and punching in passwords to re-sync your hands-free headset to take a call, consider this… Does having a better dashboard UI in your car improve your driving performance? The Tesla car has one of the most modern and intuitive dashboards in any commercial car today. It is actually based on the design of a smart phone, which can download apps and updates directly from the cloud.  The 17” touchscreen, Lynx-based dashboard totally integrates all channels and devices, allowing the driver to focus on the smooth driving and power of this luxury (toy) car.  What the folks at Tesla didn't do was avoid the complexity of our needs. Instead, they streamlined them. And, while we might not all be able to afford a Tesla, their approach demonstrates that a modern UI approach can ultimately make a positive difference in our lives and businesses.  This is why the productivity and effectiveness of a Modern Contact Center is many times greater than that of a traditional contact center. Agents in a Modern Contact Center get to focus on the task at hand, the customer engagement, rather than stumbling their way through Lego blocks of complexity.  The Oracle Service Cloud is a modern approach to customer service that empowers your agents to achieve greater focus on improving your operational and strategic success through streamlined business processes.  Here are some of the recent May 2014 release highlights to the Oracle Service Cloud: Performance Enhanced Desktop UI A modern agent desktop interface that optimizes clumsy tasks, logins, screens and workflows and is optimized for agent and system performance. Improvements include performance for drag-and-drop configurable views, saved searches, and improved caching for high-speed performance even during disconnected or slow internet access.  Customer Experience Routing A streamlined automatic way to connect the right customer need to the best agent skills, based on multidimensional variables such as product skills, language skills, workload, call volume to optimize the connection and resolution experience. On-The-Go Mobile Improvements to the Agent mobile app that extend connectivity to websites, and customer surveys that are mobile-ready and rendered for any device, and ensure the customer’s voice is captured while the insight is still top of mind.  Infused Social Engagement Enhancements to infused social capabilities allow agents to respond in social threads directly from within the agent desktop, with the information becoming part of the incident record for automatic actions (such as replay or escalate) triggered off the response. Front-End Siebel Contact Center The market leading online Web Customer Self-Service interface from the Oracle Service Cloud, is now out-of-the-box ready for Oracle Siebel customers. Deploy a new online web self-service interface in a matter of weeks to have customers self-serve and self-solve answers, with escalated incidents routed directly into the Oracle Siebel Contact Center. For more information on the latest enhancements for the Oracle Service Cloud, please see the Oracle Service Cloud May 2014 Capabilities and Benefits. Related blogs: Oracle Service Cloud Feb 2014

    Read the article

  • What data counters / meters are available?

    - by Santosh
    Actually I have a wireless 3G modem that works well on Windows based operating system, its interface software were made Windows centric. It can still connect to internet on Ubuntu or other linux based operating system but it won't show the data counter (the interface which shows how much data has been transferred, at what speed). If I continue to surf internet in Linux then I won't have any idea how much data has been used and it would become heavy on my pocket. So I just want a software that let me know how much data has been transferred, if there is a limiter; that warns or disconnects me when I reach predefined MBs then its better. Please let me know if there is any software or script or something like that already there.

    Read the article

  • Setting up Ubuntu Server as a Router with DHCPD and 3 Ethernet devices

    - by cengbrecht
    My configuration: Ubuntu 12.04 DHCP3-server eth0, eth1, eth2 Edit: removed br0&br1 eth0 is the external connection eth1 & eth2 are the internal network eth1 and eth2 are supposed to be seperate networks of student/teachers respectivly. What I would like to have is the internet from external device bridged to device 1 and 2, with the DHCP server controlling the two internal devices. Its already working with DHCP, the part I am stuck on is bridging for internet. I have setup a script that I found here: Router With the original script he linked here: Ubuntu Router Guide echo -e "\n\nLoading simple rc.firewall-iptables version $FWVER..\n" IPTABLES=/sbin/iptables #IPTABLES=/usr/local/sbin/iptables DEPMOD=/sbin/depmod MODPROBE=/sbin/modprobe EXTIF="eth0" INTIF="eth1" INTIF2="eth2" echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF" echo " Internal Interface: $INTIF2" EXTIP=`ifconfig $EXTIF | grep 'inet addr:' | sed 's#.*inet addr\:\([0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\).*#\1#g'` echo " External IP: $EXTIP" #====================================================================== #== No editing beyond this line is required for initial MASQ testing == The rest of the script below this is as is. I can get ip from the eth1 & eth2 devices, and my computer can see them, and them it, however, internet is not being passed through. If you need more information please just let me know. EDIT: So I had a 255.255.254.0 network, I believe that was causing the issue. Not sure if it will matter on the second card, I will test later. After changing the subnet to 255.255.255.0 the pings will pass through, however, I cannot get DNS requests to pass? My new Config for Firewall Rules # /etc/iptables.up.rules # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *mangle :PREROUTING ACCEPT [39:4283] :INPUT ACCEPT [39:4283] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [12:4884] :POSTROUTING ACCEPT [13:5145] COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -j LOG -A FORWARD -m state -i eth1 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth2 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth1 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth2 --state NEW,ESTABLISHED,RELATED -j ACCEPT COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *nat :INPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j SNAT --to-source 192.168.1.25 COMMIT # Completed on Wed Nov 28 19:43:28 2012 Not sure what else you may need, but I am using Webmin to control the server(Needed for the operators on site to know how to use it.) If you could explain it as standard CLI commands, or edits to this file directly then we should be ok. :) And thanks again Erik, I do believe your edits did help.

    Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >