Search Results

Search found 3481 results on 140 pages for 'dvd region'.

Page 14/140 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • How to convert mkv to dvd or avi

    - by nathanvda
    I have some mkv files, and while Totem plays them perfectly, when i use Devede to burn them to dvd it all gets messed up: the video is ok, but the audio is out of sync. I did see that Devede does write my dixv avi files correctly to disk. So i am thinking what the best way could be to convert my mkv for playback on dvd? I was thinking maybe converting them to avi first? But i did not find a good way for that to happen. What do you suggest?

    Read the article

  • Why will multiple dvd/cd-rom drives stop reading?

    - by ddc0660
    I'm having difficulty with two dvd/cd drives. When I updated from XP to Vista, I noticed they wouldn't work. I could add cds or dvds to the drives and they would attempt to read the disk, but never "found" a disk in the drive. Vista showed the drives existed without problems. I updated their drivers and nothing changed. I thought perhaps, oddly, both drives were going bad. Then I got Windows 7, and I figured I'd have to do some gymnastics in order to get it onto my system without a working disk drive. However, I can boot from the Windows 7 disk fine! I installed 7 hoping that it was a Vista problem and I'd reclaim my drives, but that is not the case. The same symptoms persist. Thoughts?

    Read the article

  • Windows Home Server installation fails because it can't find the DVD drive anymore

    - by BBlake
    I've got an old Dell Dimension 8300 desktop I decided to convert into a WHS box. I popped in a pair of 1 TB SATA drives, which were recognized fine by the BIOS and the currently installed OS (XP), so I decided to go ahead and install WHS. Near the end of the installation, WHS acts like it can no longer find the DVD drives (either of them, the box has a DVDROM and a DVDRW). The specific error is gives is the "Can't configure storage" error. I've found several forums where people say they get this error if they remove the boot DVD during the installation (at the time of the first reboot). However, I never removed the DVD. After the error, if fails into WHS, so it did mostly install and I can work with WHS. However, it refuses to recognize the network card, video card and while it shows the two DVD drives, any CD/DVD I insert in either drive the system says is corrupted and unreadable, even though none of them are. I've tried several reinstalls both removing and not removing the DVD, but the result is the same regardless. Any other tricks anyone found? If I can't figure this out, maybe I'll just install SBS2008 and fake it up to be similar to WHS with some addin tools. Shouldn't be too hard to create something since WHS is based on SBS2003 anyway.

    Read the article

  • HP dv6910 laptop no longer recognizes wireless adapter, dvd drive, and one usb port. What can I do about this?

    - by Joan H.
    In the last 3 weeks, my not even 3 year old HP laptop (vista) just seems to be failing. First, one of the usb ports stopped working. Next, the dvd drive all of a sudden was not recognized as even existing, so it is now useless. And as of today, I no longer seem to have a wireless adapter on my laptop. It doesn't show up in device manager, same as the dvd drive. I can connect to the internet by ethernet cable, but not wirelessly. It worked fine last night; now it doesn't even exist! I have tried a 'hard reset' I read about on HP's forum- no help. I am not sure what else to try. I read about the USB wifi dongle in another response, but I already have maxed our my usb ports even though I have bought a USB hub since the one port failed. Plus, I'd like my laptop to just work like it's supposed to instead of being jerry rigged with usb hubs, external dvd drives, and wifi dongles etc. Any ideas?

    Read the article

  • mint linux, DVD drive keeps randomly being accessed. unsure how to find culprit

    - by juicebox
    I have a workstation with mint linux 12. It seems like the DVD drive on the machine keeps randomly "activating". By activating it makes noise, the light turns on, and it seems like it is checking if a disk is in it. At first I thought I was being hacked and someone/something was trying to check if I had media in the DVDRom drive. I ruled that out with netstat and rkhunter. I checked my logs and the only thing I can find that might help point out the problem are these repeated chunks in syslog: Mar 24 17:47:31 rich-MINT kernel: [ 9846.551422] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in Mar 24 17:47:31 rich-MINT kernel: [ 9846.551424] res 51/40:01:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) Mar 24 17:47:31 rich-MINT kernel: [ 9846.551427] ata2.00: status: { DRDY ERR } Mar 24 17:47:31 rich-MINT kernel: [ 9846.551433] ata2.00: hard resetting link Mar 24 17:47:32 rich-MINT kernel: [ 9846.868012] ata2.01: hard resetting link Mar 24 17:47:32 rich-MINT kernel: [ 9847.344054] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Mar 24 17:47:32 rich-MINT kernel: [ 9847.344067] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 24 17:47:32 rich-MINT kernel: [ 9847.376118] ata2.00: configured for PIO0 Mar 24 17:47:32 rich-MINT kernel: [ 9847.393047] ata2.01: configured for UDMA/133 Mar 24 17:47:32 rich-MINT kernel: [ 9847.397046] ata2: EH complete and again Mar 24 17:55:28 rich-MINT kernel: [10323.633268] sr 1:0:0:0: ioctl_internal_command return code = 8000002 Mar 24 17:55:28 rich-MINT kernel: [10323.633270] : Sense Key : Aborted Command [current] [descriptor] Mar 24 17:55:28 rich-MINT kernel: [10323.633275] : Add. Sense: No additional sense information Mar 24 17:55:11 rich-MINT kernel: [10306.640009] ata2.00: link is slow to respond, please be patient (ready=0) Mar 24 17:55:16 rich-MINT kernel: [10310.840009] ata2.00: SRST failed (errno=-16) Mar 24 17:55:16 rich-MINT kernel: [10310.840016] ata2.00: hard resetting link Mar 24 17:55:16 rich-MINT kernel: [10311.160013] ata2.01: hard resetting link Mar 24 17:55:16 rich-MINT kernel: [10311.636061] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Mar 24 17:55:16 rich-MINT kernel: [10311.636075] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 24 17:55:16 rich-MINT kernel: [10311.668122] ata2.00: configured for PIO0 Mar 24 17:55:16 rich-MINT kernel: [10311.684854] ata2.01: configured for UDMA/133 Mar 24 17:55:17 rich-MINT kernel: [10312.105473] ata2: EH complete (Copied from Pastebin - http://pastebin.com/YNDrnyzH) If any linux masters could take a quick look at these log outputs and help me understand what is going on , much appreciated.

    Read the article

  • Region highlighting in Visual Studio 2010

    - by atch
    Guys, feature in new release of Visual Studio which is block/region highlighting, I think is quite useless, and definitely frustrating when every time my cursor passes this line my whole region is being highlighted. Does anyone of you feel the same way and if not do you find this usefull for anything? Because I can't.

    Read the article

  • mint linux, DVD drive keeps randomly being accessed. unsure how to find culprit

    - by juicebox
    I have a workstation with mint linux 12. It seems like the DVD drive on the machine keeps randomly "activating". By activating it makes noise, the light turns on, and it seems like it is checking if a disk is in it. At first I thought I was being hacked and someone/something was trying to check if I had media in the DVDRom drive. I ruled that out with netstat and rkhunter. I checked my logs and the only thing I can find that might help point out the problem are these repeated chunks in syslog: Mar 24 17:47:31 rich-MINT kernel: [ 9846.551422] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in Mar 24 17:47:31 rich-MINT kernel: [ 9846.551424] res 51/40:01:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) Mar 24 17:47:31 rich-MINT kernel: [ 9846.551427] ata2.00: status: { DRDY ERR } Mar 24 17:47:31 rich-MINT kernel: [ 9846.551433] ata2.00: hard resetting link Mar 24 17:47:32 rich-MINT kernel: [ 9846.868012] ata2.01: hard resetting link Mar 24 17:47:32 rich-MINT kernel: [ 9847.344054] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Mar 24 17:47:32 rich-MINT kernel: [ 9847.344067] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 24 17:47:32 rich-MINT kernel: [ 9847.376118] ata2.00: configured for PIO0 Mar 24 17:47:32 rich-MINT kernel: [ 9847.393047] ata2.01: configured for UDMA/133 Mar 24 17:47:32 rich-MINT kernel: [ 9847.397046] ata2: EH complete and again Mar 24 17:55:28 rich-MINT kernel: [10323.633268] sr 1:0:0:0: ioctl_internal_command return code = 8000002 Mar 24 17:55:28 rich-MINT kernel: [10323.633270] : Sense Key : Aborted Command [current] [descriptor] Mar 24 17:55:28 rich-MINT kernel: [10323.633275] : Add. Sense: No additional sense information Mar 24 17:55:11 rich-MINT kernel: [10306.640009] ata2.00: link is slow to respond, please be patient (ready=0) Mar 24 17:55:16 rich-MINT kernel: [10310.840009] ata2.00: SRST failed (errno=-16) Mar 24 17:55:16 rich-MINT kernel: [10310.840016] ata2.00: hard resetting link Mar 24 17:55:16 rich-MINT kernel: [10311.160013] ata2.01: hard resetting link Mar 24 17:55:16 rich-MINT kernel: [10311.636061] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Mar 24 17:55:16 rich-MINT kernel: [10311.636075] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 24 17:55:16 rich-MINT kernel: [10311.668122] ata2.00: configured for PIO0 Mar 24 17:55:16 rich-MINT kernel: [10311.684854] ata2.01: configured for UDMA/133 Mar 24 17:55:17 rich-MINT kernel: [10312.105473] ata2: EH complete (Copied from Pastebin - http://pastebin.com/YNDrnyzH) If any linux masters could take a quick look at these log outputs and help me understand what is going on , much appreciated.

    Read the article

  • CD Drive not discovered

    - by user1009073
    I have a self built computer. it uses a P6T Deluxe motherboard, which has both SATA and IDE ports. This was built several years ago, and had an IDE CD/DVD drive. This drive started going bad (would not burn CDs correctly), so I decided to replace it. I had difficultly finding an IDE DVD drive, so I bought a SATA DVD drive. I opened the comnputer, took out the old DVD drive. I left the IDE cable in place, connected to the motherboard, but it is not connected to any drives. I hooked up the new DVD drive, both power and with a SATA data cable (SATA port 3 if I recall). (Sony Optiarc 24x , Newegg URL: http://www.newegg.com/Product/Product.aspx?Item=N82E16827118067 ) When I power on my computer, the drive does NOT show up in Explorer. I can hit the DVD eject button, and the drive will open up, so I know it at least is getting power. I thought, maybe something in the BIOS. When I go to BIOS, boot devices, it shows (1) floppy, (2) my hard drive (3) ATAPI CD Drive. The only other possible BIOS option I could find was uder 'Storage Configuration'. Configure Storage as: My setting is RAID, since I am using two drives in a RAID configuration. Other options were IDE and ACHI. Other than trying to find an IDE DVD drive, is there anything else I can try? The drive does not show up at all in Windows Explorer. I did put in a CD thinking that might help, but nothing happened. Thanks, GS

    Read the article

  • Slow dvd burning/reading speeds: how to solve

    - by wouter205
    I have a problem on which I'm struggling since i started using linux a year ago on my desktop, but still haven't found a solution for it. When reading or burning a dvd, the speeds are very slow (mostly under 1x) whilst I did selected the fastest speed in k3b. As such, it takes up to 40-50 minutes to burn one dvd! I read about enabling dma this post but it didn't help. This is the output for dmesg | grep -i dma > [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3527 pages used for memmap [ 0.000000] DMA32 zone: 254441 pages, LIFO batch:31 [ 0.000000] Policy zone: DMA32 [ 0.120356] pnp 00:01: [dma 4] [ 0.120968] pnp 00:05: [dma 2] [ 0.121421] pnp 00:06: [dma 3] [ 0.122617] pnp 00:0b: [dma 0 disabled] [ 0.852321] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe480 bmdma 0xe000 irq 19 [ 0.852325] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 19 [ 0.861633] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 0.861636] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.329411] ata1.00: ATA-7: Maxtor 6V250F0, VA111630, max UDMA/133 [ 1.345418] ata1.00: configured for UDMA/133 [ 1.820606] ata4.00: ATAPI: PHILIPS DVDR1660P1, P1.3, max UDMA/33 [ 1.820610] ata4.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 1.820613] ata4.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 1.836681] ata4.00: configured for UDMA/33 [ 12.296600] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] reading the third and fourth last line, I assume there is indeed a problem with dma? edit: this question still is not solved. Could anyone come up with an other solution please? Thanks

    Read the article

  • DVD-drive detected by BIOS and UEFI but not by Ubuntu 12.04

    - by user97591
    I have build a new tower containing; Asrock Z77 extreme4 (motherboard) Core i7 (processor) Hitachi LGE-DMGH 12 L (B) GH15F SATA (SATA DVD-drive) Problem is; BIOS and UEFI has no problems detecting the DVD-drive but it is not detected by Ubuntu 12.04. It is not present in /etc/fstab or /etc/mtab. Below is the contents of fstab and mtab. Thanks for all your help. fstab: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=f007bc60-da4c-4f36-99a7-77083c5f3654 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=5d59949c-aed9-442a-877d-5abf1ccaadc3 none swap sw 0 0 mtab: /dev/sda1 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/tom/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=tom 0 0

    Read the article

  • Burn 24/96 flac files to play on standalone player

    - by takeshin
    I have vinyl record rip in 24/96 flac format. Each track is almost 200 MB big, so the album won't fit on CD. How to burn these files on a DVD to play with the same quality on standalone DVD player? My player supports SACD, DVD Audio and DVD video as well. My OS is Ubuntu Lucid (preferred), but I have also WinXp with Nero installed. BTW, is there any difference between DVD+ and DVD- for audio?

    Read the article

  • HOW TO Convert DVD to iPad(Also converts to iPods)?

    - by goodm
    DVD to iPad Converter (Also converts to iPods) DVD to iPad Converter is the easiest-to-use and fastest DVD to iPad converter for Apple iPad movie and iPad video. It can convert almost any kind of DVD to iPad movie or iPad video format. It is also a powerful DVD to iPad converter with a conversion speed that is much faster than real-time. With this converter, you can use your iPad as a portable DVD player and enjoy your favorite DVDs on your iPad. http://www.softseeking.com/prodail.aspx?proid=83" Features of this DVD to iPad Converter Three Running Modes --In Direct Mode, you can directly click the DVD menu to select the movie you want to rip. This mode is very easy for ripping DVD movies. --In Batch Mode, you can select the DVD titles or chapters you want to rip via a checkbox list. This mode is very easy for batch ripping music DVDs, MTV DVDs and episodic DVDs. --In 1-Click Mode, you just need one click to open a DVD, after which the rest of the task will be done automatically. This is a “designed-for-dummies” mode. Input Types You can convert almost any kind of DVD format to iPad. Output Splitting You can split your output video by DVD chapters and titles. Fully supports MTV DVDs and episodic DVDs. File Size and Quality Adjustment You can customize the output file size and corresponding video quality. Flexible Output Profiles You can easily customize the various video settings such as brightness, bit rate, etc. Language Selection for Subtitles and Audio Track In Direct mode and in Batch mode, you can select the subtitle and audio track language. (In 1-Click mode, the default language is chosen automatically). Video Crop You can crop your video to 16:9, 4:3, full screen, etc. Video Resize You can resize your video. For example, you can set it to "Keep aspect ratio" or "Stretch to fit screen." Other Converts DVD to MP3 audio. Supports Dolby, DTS Surround audio track. Converts to the latest iPhone, 4th generation iPad nano, nano chromatic, 2nd generation iPad touch, and Apple TV.

    Read the article

  • "VLC could not read the file" error when trying to play DVDs

    - by stephenmurdoch
    I can watch most DVD's on my machine using VLC but today, I went to watch Thor, and it won't play. libdvdread4 and libdvdcss2 are at the latest versions. vlc -v returns 1.1.4 w32codecs are installed and reinstalled ubuntu-restricted-extras are same as above My machine recognises the disc and I can open the folder and browse the assorted .vob files, of which there are many. None of them will open in VLC, or in MPlayer etc. When I run vlc -vvv /media/THOR/VIDEO_TS/VTS_03_1.VOB I get: File Reading Failed VLC could not read the file I also see command line output like this: [0x963f47c] main filter debug: removing module "swscale" [0x963a4b4] main generic debug: A filter to adapt decoder to display is needed [0x964be84] main filter debug: looking for video filter2 module: 18 candidates [0x964be84] swscale filter debug: 720x576 chroma: I420 -> 979x551 chroma: RV32 with scaling using Bicubic (good quality) [0x964be84] main filter debug: using video filter2 module "swscale" ..... [0x959f4e4] main video output warning: late picture skipped (-10038 > -15327) [0x963a4b4] main generic debug: auto hidding mouse [0x93ca094] main input warning: clock gap, unexpected stream discontinuity [0x93ca094] main input warning: feeding synchro with a new reference point trying to recover from clock gap [0x959f4e4] main video output warning: early picture skipped ...... ac-tex damaged at 0 12 ac-tex damaged at 6 20 ac-tex damaged at 12 28 This happens with onboard and Known Good USB DVD player I don't have standalone DVD player to try with TV I am going to watch another film instead for now, because I can do that. I just can't watch THOR, and I'm pretty confident that the disc is ok. It is a rental, but it's clean and there are no surface abrasions. I even cleaned it with Christian Dior aftershave to make sure.

    Read the article

  • ubuntu 12.04 will not play DVDs

    - by ayelet
    First off, I'm not just a newbie, I'm clueless! So your answers will need to be in complete idiot language (let's say I'm computer saavy, and I can follow directions,but I've never programmed anything and assume I don't understand any abbreviations. So why am I running linux? b/c windows was driving me nuts!! and my friend convinced me. day-to-day operations, we're doing fine, but when it comes to problems, I've got no clue what I'm doing!) So here's what's going on, my machine is an HP pavilion dv6, my optical drive is a standard cd/dvdrw, when i load an audio cd of any type (burned, official, etc,..) I have no problems, when I pop in a dvd - i get nothing. the dvd icon comes up in my launch tray, when I open VLC player I can find the dvd in the folder... but it won't play. I can watch movies I've downloaded with no problem, I can also watch movies off an external hard drive. The only thing I've tried is removing vlc and reinstalling, and I tried installing a different player (gnome maybe? I don't remember). none of that worked. Again, i can follow directions, but you need to be very specific and don't assume I know anything going in. (I mean, I know basic stuff, but nothing too technical.) PLEASE HELP!!! MY KIDS ARE DRIVING ME CRAZY!!! Thanks!!

    Read the article

  • Can't mount UBS flash drives or my CD/DVD drives

    - by Bret Workman
    How can I fix the permissions to get rid of the following error and mount my USB and internal CD/DVD drive: Adding read ACL for uid 1000 to `/media/bret' failed: Operation not supported These drives worked fin in 12.04, but I apparently now don't have permissions to mount these drives in 12.10. I tried chmod in Terminal, but I couldn't enter as the superuser, so I seem to be stuck. Please help! Thanks

    Read the article

  • How to Eject Your CD/DVD Drive From the Desktop Context Menu

    - by Taylor Gibb
    Most of the time you’ll eject the CD/DVD drive on your PC through a button on the drive, but some laptops don’t include a button. Here’s a way to do it right from the desktop. If you’d like to safely eject USB drives from your desktop, we’ve got you covered with that one too. Amazon’s New Kindle Fire Tablet: the How-To Geek Review HTG Explains: How Hackers Take Over Web Sites with SQL Injection / DDoS Use Your Android Phone to Comparison Shop: 4 Scanner Apps Reviewed

    Read the article

  • Building DVD discs with Bombono

    <b>LWN.net:</b> "DVD authoring can be a deceptively tricky business. Though it can take some time to convert source video to the proper MPEG format, the technical requirements for the various regions are standardized, so it is at least possible to configure the conversion tools and do it right, once and for all."

    Read the article

  • How to create .iso from Snow Leopard retail DVD

    - by user10580
    I have a legal copy of Snow Leopard on DVD (retail) which I am attempting to use to create a bootable flash drive. The software I have been directed to use requests a .iso file (as I am familiar with from other os installs), but when inserting the DVD into either Windows 7 or Ubuntu 9.10 the disk is recognized only as a "Windows Support" DVD, with materials to "support Apple hardware with Windows." This is eventually intended for a hackintosh attempt on an ASUS EEEPC 1000HE netbook. This is an install disk. Thanks

    Read the article

  • Burning Xvid and Dvix Files problems

    - by chobo2
    Hi I am using windows 7 ultimate 64 bit edition and Nero 8. Recently I noticed that every time I go to nero and burn a dvix/xvid file as a data DVD and try to play it in a dvd player that supports these types it does not load up and play. I then go to my XP machine with Nero 6 on it and burn the exact same file as a data DVD and it works in the exact same dvd player. I am not sure why this is happening? I am not sure if it is windows 7, nero 8 or my actual dvd burner that is the problem. How should I go about and figure out what the problem is? Thanks

    Read the article

  • Vim syntax highlighting: make region only match on one line

    - by sixtyfootersdude
    Hello I have defined a custom file type with these lines: syn region SubSubtitle start=+=+ end=+=+ highlight SubSubtitle ctermbg=black ctermfg=DarkGrey syn region Subtitle start=+==+ end=+==+ highlight Subtitle ctermbg=black ctermfg=DarkMagenta syn region Title start=+===+ end=+===+ highlight Title ctermbg=black ctermfg=yellow syn region MasterTitle start=+====+ end=+====+ highlight MasterTitle cterm=bold term=bold ctermbg=black ctermfg=LightBlue I enclose all of my headings in this kind of document like this: ==== Biggest Heading ==== // this will be bold and light blue ===Sub heading === // this will be yellow bla bla bla // this will be normally formatted However right now when ever I use an equals sign in my code it thinks that it is a title. Is there anyway that I can force a match to be only on one line?

    Read the article

  • What are the essential COM components required for burning DVD in Windows XP using .NET?

    - by shruti
    I'm trying to burn DVD/CD through frontend C# code... i have used IMAPI2 for buring CD/DVD in windows XP..but it is giving me unhandled exception... as:- System.InvalidCastException: Unable to cast COM object of type 'IMAPI2.Interop.MsftFileSystemImageClass' to interface type 'IMAPI2.Interop.MsftFileSystemImage'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{7CFF842C-7E97-4807-8304-910DD8F7C051}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)) can anyone please help me out to solve this problem. I'm not able to solve this error. this project is working fine in Windows7 but unable to work with XP.

    Read the article

  • What are the essential COM componenets required for burning DVD in c#.net in Windows XP?

    - by shruti
    im trying to burn DVD/CD through frontend C#.net code... i have used IMAPI2 for buring CD/DVD in windows XP..but it is giving me unhandeled exception... as:- System.InvalidCastException: Unable to cast COM object of type 'IMAPI2.Interop.MsftFileSystemImageClass' to interface type 'IMAPI2.Interop.MsftFileSystemImage'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{7CFF842C-7E97-4807-8304-910DD8F7C051}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)) can anyone plz help me out to solve this pbm...im not able to solve this error.. this project is working fine in Windows7 but unable to work with XP...???

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >