Search Results

Search found 413 results on 17 pages for 'expansion'.

Page 14/17 | < Previous Page | 10 11 12 13 14 15 16 17  | Next Page >

• Problem writing a snippet containing Emacs Lisp code

  - by user388346

  Hi all, I've been trying to make use of a cool feature of YASnippet: write snippets containing embedded Emacs Lisp code. There is a snippet for rst-mode that surrounds the entered text with "=" that is as long as the text such as in ==== Text ==== Based on this snippet, I decided to slightly modify it (with Elisp) so that it comments out these three lines depending on the major mode you are in (I thought that such a snippet would be useful to organize the source code). So I wrote this: ${1:`(insert comment-start)`} ${2:$(make-string (string-width text) ?\-)} $1 ${2:Text} $1 ${2:$(make-string (string-width text) ?\-)} $0 This code works relatively well except for one problem: the indentation of these three lines gets mixed up, depending on the major mode I'm in (e.g., in emacs-lisp-mode, the second and the third lines move more to the right than the first line). I think the source of the problem might have something to do with what comes after the string ${1: on the first line. If I add a character, I have no problem (i.e., all three lines are correctly aligned at the end of the snippet expansion). If I add a single space after this string, the misalignment problem still continues though. So my question is: do you know of any way of rewriting this snippet so that this misalignment does not arise? Do you know what's the source of this behaviour? Cheers,

  Read the article

• How do I swallow the dropdown behavior inside an Expander.Header?

  - by Peter Seale

  Hello, I would like to prevent an Expander from expanding/collapsing when users click inside the header area. This is basically the same question as Q 1396153, but I'd appreciate a more favorable answer :) Is there a non-invasive way to do this? I am not sure exactly how to attach behavior to the Expander.Header content to prevent mouseclicks. I'm willing to float in content outside the expander itself via a fixed grid layout, but I'm not keen on the solution. Ideas? XamlPad sample XAML: <Page xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:sys="clr-namespace:System;assembly=mscorlib" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" > <Expander> <Expander.Header><TextBlock>When I click this text, I don't want to trigger expansion/collapse! Only when I click the expander button do I want to trigger an expand/collapse!</TextBlock></Expander.Header> <Grid Background="Red" Height="100" Width="100" > </Grid> </Expander> </Page>

  Read the article

• Building a custom Linux Live CD

  - by Mike Heinz

  Can anyone point me to a good tutorial on creating a bootable Linux CD from scratch? I need help with a fairly specialized problem: my firm sells an expansion card that requires custom firmware. Currently we use an extremely old live CD image of RH7.2 that we update with current firmware. Manufacturing puts the cards in a machine, boots off the CD, the CD writes the firmware, they power off and pull the cards. Because of this cycle, it's essential that the CD boot and shut down as quickly as possible. The problem is that with the next generation of cards, I have to update the CD to a 2.6 kernel. It's easy enough to acquire a pre-existing live CD - but those all are designed for showing off Linux on the desktop - which means they take forever to boot. Can anyone fix me up with a current How-To? Update: So, just as a final update for anyone reading this later - the tool I ended up using was "livecd-creator". My reason for choosing this tool was that it is available for RedHat-based distributions like CentOs, Fedora and RHEL - which are all distributions that my company supports already. In addition, while the project is very poorly documented it is extremely customizable. I was able to create a minimal LiveCD and edit the boot sequence so that it booted directly into the firmware updater instead of a bash shell. The whole job would have only taken an hour or two if there had been a README explaining the configuration file!

  Read the article

• Greasemonkey failing to GM_setValue()

  - by HonoredMule

  I have a Greasemonkey script that uses a Javascript object to maintain some stored objects. It covers quite a large volume of information, but substantially less than it successfully stored and retrieved prior to encountering my problem. One value refuses to save, and I can not for the life of me determine why. The following problem code: Works for other larger objects being maintained. Is presently handling a smaller total amount of data than previously worked. Is not colliding with any function or other object definitions. Can (optionally) successfully save the problem storage key as "{}" during code startup. this.save = function(table) { var tables = this.tables; if(table) tables = [table]; for(i in tables) { logger.log(this[tables[i]]); logger.log(JSON.stringify(this[tables[i]])); GM_setValue(tables[i] + "_" + this.user, JSON.stringify(this[tables[i]])); logger.log(tables[i] + "_" + this.user + " updated"); logger.log(GM_getValue(tables[i] + "_" + this.user)); } } The problem is consistently reproducible and the logging statments produce the following output in Firebug: Object { 54,10 = Object } // Expansion shows complete contents as expected, but there is one oddity--Firebug highlights the array keys in purple instead of the usual black for anonymous objects. {"54,10":{"x":54,"y":10,"name":"Lucky Pheasant"}} // The correctly parsed string. bookmarks_HonoredMule saved undefined I have tried altering the format of the object keys, to no effect. Further narrowing down the issue is that this particular value is successfully saved as an empty object ("{}") during code initialization, but skipping that also does not help. Reloading the page confirms that saving of the nonempty object truly failed. Any idea what could cause this behavior? I've thoroughly explored the possibility of hitting size constraints, but it doesn't appear that can be the problem--as previously mentioned, I've already reduced storage usage. Other larger objects save still, and the total number of objects, which was not high already, has further been reduced by an amount greater than the quantity of data I'm attempting to store here.

  Read the article

• Where to store: User connection information?

  - by TomTom

  ;) I am writing a .NET application wher ethe user connects to a given server. ALl information within the application is stored in the server. But I want / need to store the following information for the user: The server he connected to last The username he used to connect last (and no, no password, never ever). Any idea where to store this best? the application config file is not sensible (user != admin, application.config is write protected for him). So, my options are: In the registry. 2 keys under my own subkey. In a sort of ini file, stored in the user's data directory (AppData). This would possibly also allow later expansion (into like saving more information, some of which may not fit into the registry). Anyone a tip? Other alternatives? I tend so far to go for the AppData directory with my own subfolder - simply because it is a nice preparation for later to keep like a local copy of configuration etc.

  Read the article

• Unknown ListView Behavior

  - by st0le

  I'm currently making a SMS Application in Android, the following is a code snippet from Inbox Listactivity, I have requested a cursor from the contentresolver and used a custom adapter to add custom views into the list. Now, in the custom view i've got 2 TextViews (tvFullBody,*tvBody*)... tvFullBody contains the Full SMS Text while tvBody contains a short preview (35 characters) The tvFullBody Visibility is by default set to GONE. My idea is, when the user clicks on a list item, the tvBody should dissappear(GONE) and the tvFullBody should become visible (VISIBLE). On Clicking again, it should revert back to its original state. //isExpanded is a BitSet of the size = no of list items...keeps track of which items are expanded and which are not @Override protected void onListItemClick(ListView l, View v, int position, long id) { if(isExpanded.get(position)) { v.findViewById(R.id.tvFullBody).setVisibility(View.GONE); v.findViewById(R.id.tvBody).setVisibility(View.VISIBLE); }else { v.findViewById(R.id.tvFullBody).setVisibility(View.VISIBLE); v.findViewById(R.id.tvBody).setVisibility(View.GONE); } isExpanded.flip(position); super.onListItemClick(l, v, position, id); } The Code works as it is supposed to :) except for an undesired sideeffect.... Every 10th (or so) List Item also gets "toggled". eg. If i Expand the 1st, then the 11th, 21th list items are also expanded...Although they remain off screen, but on scrolling you get to see the undesired "expansion". By my novice analysis, i'm guessing Listview keeps track of 10 list items that are currently visible, upon scrolling, it "reuses" those same variables, which is causing this problem...(i didn't check the android source code yet.) I'd be gratefull for any suggestion, on how i should tackle this! :) I'm open to alternative methods aswell....Thanks in advance! :)

  Read the article

• C++ Macro Arithmetric

  - by anon

  I have to do with Macros (it's macros calling macros; so templates are out of the question). Here's what I want: foo(3, a, b1, c1) --> foo1(a, b1, c1); foo(5, a, b1, c1, b2, c2) -> foo2(a, b1, c1, b2, c2); foo(7, a, b1, c1, b2, c2, b3, c3) -> foo3(a, b1, c1, b2, c2, b3, c3); So basically, what I want is to be able to execute the "function" n - (n-1)/2 at macro expansion time. Is this possible? Thanks! [PS, if you dislike my questions; I support your right to downvote; my worst question so far is only -17, so maybe we can break that record; however, please let me know why my question is technically invalid.] Thanks EDIT: Foo takes a variable # of arguments, of the form: foo(N, a1, b1, a2, b2, ... a_N, b_N) -> foo##N(a1, b1, a2, b2, ... a_N, b_N);

  Read the article

• What's the best practice for handling system-specific information under version control?

  - by Joe

  I'm new to version control, so I apologize if there is a well-known solution to this. For this problem in particular, I'm using git, but I'm curious about how to deal with this for all version control systems. I'm developing a web application on a development server. I have defined the absolute path name to the web application (not the document root) in two places. On the production server, this path is different. I'm confused about how to deal with this. I could either: Reconfigure the development server to share the same path as the production Edit the two occurrences each time production is updated. I don't like #1 because I'd rather keep the application flexible for any future changes. I don't like #2 because if I start developing on a second development server with a third path, I would have to change this for every commit and update. What is the best way to handle this? I thought of: Using custom keywords and variable expansion (such as setting the property $PATH$ in the version control properties and having it expanded in all the files). Git doesn't support this because it would be a huge performance hit. Using post-update and pre-commit hooks. Possibly the likely solution for git, but every time I looked at the status, it would report the two files as being changed. Not really clean. Pulling the path from a config file outside of version control. Then I would have to have the config file in the same location on all servers. Might as well just have the same path to begin with. Is there an easy way to deal with this? Am I over thinking it?

  Read the article

• What's wrong with this C# CodeSnippet?

  - by Buffalo

  I've made snippets before but I must be overlooking something really simple; I cannot figure out where the error is in this snippet... <CodeSnippet Format="1.0.0" xmlns="http://schemas.microsoft.com/VisualStudio/2005/CodeSnippet"> <Header> <Title>Throw NotImplementedException()</Title> <Author>olaffuB</Author> <Shortcut>nie</Shortcut> <Description>Quickly add a new NotImplementedException() to code.</Description> <SnippetTypes> <SnippetType>Expansion</SnippetType> </SnippetTypes> </Header> <Snippet> <Declarations> <Literal> <ID>TODO</ID> <Default></Default> </Literal> </Declarations> <Code Language="C#"> <![CDATA[throw new NotImplementedException("$TODO$"); // TODO: $TODO$]]> </Code> </Snippet> Basically, when I got to import the snippet, it says that it is "invalid". The file name is "nie.snippet". Thanks!

  Read the article

• What collection object is appropriate for fixed ordering of values?

  - by makerofthings7

  Scenario: I am tracking several performance counters and have a CounterDescription[] correlate to DataSnapshot[]... where CounterDescription[n] describes the data loaded within DataSnapshot[n]. I want to expose an easy to use API within C# that will allow for the easy and efficient expansion of the arrays. For example CounterDescription[0] = Humidity; DataSnapshot[0] = .9; CounterDescription[1] = Temp; DataSnapshot[1] = 63; My upload object is defined like this: Note how my intent is to correlate many Datasnapshots with a dattime reference, and using the offset of the data to refer to its meaning. This was determined to be the most efficient way to store the data on the back-end, and has now reflected itself into the following structure: public class myDataObject { [DataMember] public SortedDictionary<DateTime, float[]> Pages { get; set; } /// <summary> /// An array that identifies what each position in the array is supposed to be /// </summary> [DataMember] public CounterDescription[] Counters { get; set; } } I will need to expand each of these arrays (float[] and CounterDescription[] ), but whatever data already exists must stay in that relative offset. Which .NET objects support this? I think Array[] , LinkedList<t>, and List<t> Are able to keep the data fixed in the right locations. What do you think?

  Read the article

• Temporarily disable vim plugin without relaunching

  - by simont

  I'm using c-support in Vim. One of it's features is the automatic comment expansion. When I'm pasting code into Vim from an external editor, the comments are expanded (which gives me double-comments and messes up the paste - see below for example). I'd like to be able to disable the plugin, paste, then re-enable it, without relaunching Vim. I'm not sure if this is possible. The SO questions here, here and here all describe methods to disable plugins, but they all require me to close Vim, mess with my .vimrc or similar, and relaunch; if I have to close Vim, I might as well cat file1 >> myfile; vim myfile, then shift the lines internally, which will be just as quick. Is it possible to disable a plugin while running vim without relaunching, preferably in a way which allows me to map a hot-key toggle-plugin (so re-sourcing ~/.vimrc is alright; that's mappable to a hotkey [I imagine, haven't tried it yet])? Messed up comments: /* * * Authors: * * A Name * * * * Copyright: * * A Name, 2012 * */ EDIT: It turns out you can :set paste, :set nopaste (which, to quote :help paste, will "avoid unexpected effects [while pasting]". (See the comments). However, I'm still curious whether you can disable/enable a plugin as per the original question, so I shall leave the question open.

  Read the article

• .NET List Thread-Safe Implementation Suggestion needed

  - by Bamboo

  .Net List class isn't thread safe. I hope to achieve the minimal lock needed and yet still fulfilling the requirement such that as for reading, phantom record is allowed, and for writing, they must be thread-safe so there won't be any lost updates. So I have something like public static List<string> list = new List<string>(); In Methods that have **List.Add**/**List.Remove** , I always lock to assure thread safety lock (lockHelper) { list.Add(obj); or list.Remove(obj); } In Methods that requires **List Reading** I don't care about phantom record so I go ahead to read without any locking. In this case. Return a bool by checking whether a string had been added. if (list.Count() != 0) { return list.Contains("some string") } All I did was locking write accesses, and allow read accesses to go through without any locking. Is my thread safety idea valid? I understand there is List size expansion. Will it be ok? My guess is that when a List is expanding, it may uses a temp. list. This is ok becasue the temp list size will always have a boundary, and .Net class is well implemented, ie. there shouldn't be any indexOutOfBound or circular reference problems when reading was caught in updates.

  Read the article

• OpenSSL: certificate signature failure error

  - by e-t172

  I'm trying to wget La Banque Postale's website. $ wget https://www.labanquepostale.fr/ --2009-10-08 17:25:03-- https://www.labanquepostale.fr/ Resolving www.labanquepostale.fr... 81.252.54.6 Connecting to www.labanquepostale.fr|81.252.54.6|:443... connected. ERROR: cannot verify www.labanquepostale.fr's certificate, issued by `/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)06/CN=VeriSign Class 3 Extended Validation SSL SGC CA': certificate signature failure To connect to www.labanquepostale.fr insecurely, use `--no-check-certificate'. Unable to establish SSL connection. I'm using Debian Sid. On another machine which is running Debian Sid with same software versions the command works perfectly. ca-certificates is installed on both machines (I tried removing it and reinstalling it in case a certificate got corrupted somehow, no luck). Opening https://www.labanquepostale.fr/ in Iceweasel on the same machine works perfectly. Additional information: $ openssl s_client -CApath /etc/ssl/certs -connect www.labanquepostale.fr:443 CONNECTED(00000003) depth=3 /C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority verify error:num=7:certificate signature failure verify return:0 --- Certificate chain 0 s:/1.3.6.1.4.1.311.60.2.1.3=FR/2.5.4.15=V1.0, Clause 5.(b)/serialNumber=421100645/C=FR/postalCode=75006/ST=PARIS/L=PARIS/streetAddress=115 RUE DE SEVRES/O=LA BANQUE POSTALE/OU=DISF2/CN=www.labanquepostale.fr i:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)06/CN=VeriSign Class 3 Extended Validation SSL SGC CA 1 s:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)06/CN=VeriSign Class 3 Extended Validation SSL SGC CA i:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=(c) 2006 VeriSign, Inc. - For authorized use only/CN=VeriSign Class 3 Public Primary Certification Authority - G5 2 s:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=(c) 2006 VeriSign, Inc. - For authorized use only/CN=VeriSign Class 3 Public Primary Certification Authority - G5 i:/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority 3 s:/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority i:/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority --- Server certificate -----BEGIN CERTIFICATE----- <base64-encoded certificate removed for lisibility> -----END CERTIFICATE----- subject=/1.3.6.1.4.1.311.60.2.1.3=FR/2.5.4.15=V1.0, Clause 5.(b)/serialNumber=421100645 /C=FR/postalCode=75006/ST=PARIS/L=PARIS/streetAddress=115 RUE DE SEVRES/O=LA BANQUE POSTALE/OU=DISF2/CN=www.labanquepostale.fr issuer=/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)06/CN=VeriSign Class 3 Extended Validation SSL SGC CA --- No client certificate CA names sent --- SSL handshake has read 5101 bytes and written 300 bytes --- New, TLSv1/SSLv3, Cipher is RC4-MD5 Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : RC4-MD5 Session-ID: 0009008CB3ADA9A37CE45B464E989C82AD0793D7585858584ACE056700035363 Session-ID-ctx: Master-Key: 1FB7DAD98B6738BEA7A3B8791B9645334F9C760837D95E3403C108058A3A477683AE74D603152F6E4BFEB6ACA48BC2C3 Key-Arg : None Start Time: 1255015783 Timeout : 300 (sec) Verify return code: 7 (certificate signature failure) --- Any idea why I get certificate signature failure? As if this wasn't strange enough, copy-pasting the "server certificate" mentionned in the output and running openssl verify on it returns OK...

  Read the article

• Globe SSL with NGINX SSL certificate problem, please help

  - by PartySoft

  I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

  Read the article

• dovecot imap ssl certificate issues

  - by mulllhausen

  i have been trying to configure my dovecot imap server (version 1.0.10 - upgrading is not an option at this stage) with a new ssl certificate on ubuntu like so: $ grep ^ssl /etc/dovecot/dovecot.conf ssl_disable = no ssl_cert_file = /etc/ssl/certs/mydomain.com.crt.20120904 ssl_key_file = /etc/ssl/private/mydomain.com.key.20120904 $ /etc/init.t/dovecot stop $ sudo dovecot -p $ [i enter the ssl password here] it doesn't show any errors and when i run ps aux | grep dovecot i get root 21368 0.0 0.0 12452 688 ? Ss 15:19 0:00 dovecot -p root 21369 0.0 0.0 71772 2940 ? S 15:19 0:00 dovecot-auth dovecot 21370 0.0 0.0 14140 1904 ? S 15:19 0:00 pop3-login dovecot 21371 0.0 0.0 14140 1900 ? S 15:19 0:00 pop3-login dovecot 21372 0.0 0.0 14140 1904 ? S 15:19 0:00 pop3-login dovecot 21381 0.0 0.0 14280 2140 ? S 15:19 0:00 imap-login dovecot 21497 0.0 0.0 14280 2116 ? S 15:29 0:00 imap-login dovecot 21791 0.0 0.0 14148 1908 ? S 15:48 0:00 imap-login dovecot 21835 0.0 0.0 14148 1908 ? S 15:53 0:00 imap-login dovecot 21931 0.0 0.0 14148 1904 ? S 16:00 0:00 imap-login me 21953 0.0 0.0 5168 944 pts/0 S+ 16:02 0:00 grep --color=auto dovecot which looks like it is all running fine. so then i test to see if i can telnet to the dovecot server, and this works fine: $ telnet localhost 143 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK Dovecot ready. but when i test whether dovecot has configured the ssl certificates properly, it appears to fail: $ sudo openssl s_client -connect localhost:143 -starttls imap CONNECTED(00000003) depth=0 /description=xxxxxxxxxxxxxxxxx/C=AU/ST=xxxxxxxx/L=xxxx/O=xxxxxx/CN=*.mydomain.com/[email protected] verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /description=xxxxxxxxxxx/C=AU/ST=xxxxxx/L=xxxx/O=xxxx/CN=*.mydomain.com/[email protected] verify error:num=27:certificate not trusted verify return:1 depth=0 /description=xxxxxxxx/C=AU/ST=xxxxxxxxxx/L=xxxx/O=xxxxx/CN=*.mydomain.com/[email protected] verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/description=xxxxxxxxxxxx/C=AU/ST=xxxxxxxxxx/L=xxxxxxxx/O=xxxxxxx/CN=*.mydomain.com/[email protected] i:/C=IL/O=StartCom Ltd./OU=Secure Digital Certificate Signing/CN=StartCom Class 2 Primary Intermediate Server CA --- Server certificate -----BEGIN CERTIFICATE----- xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx . . . xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxx== -----END CERTIFICATE----- subject=/description=xxxxxxxxxx/C=AU/ST=xxxxxxxxx/L=xxxxxxx/O=xxxxxx/CN=*.mydomain.com/[email protected] issuer=/C=IL/O=StartCom Ltd./OU=Secure Digital Certificate Signing/CN=StartCom Class 2 Primary Intermediate Server CA --- No client certificate CA names sent --- SSL handshake has read 2831 bytes and written 342 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: xxxxxxxxxxxxxxxxxxxx Session-ID-ctx: Master-Key: xxxxxxxxxxxxxxxxxx Key-Arg : None Start Time: 1351661960 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) --- . OK Capability completed. at least, i'm assuming this is a failure???

  Read the article

• Globe SSL with NGINX SSL certificate problem, please help

  - by PartySoft

  Hello, I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

  Read the article

• Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubu

  - by user37968

  I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

  Read the article

• Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubuntu Lucid

  - by MIDoubleKO

  I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

  Read the article

• Postfix: Relay access denied

  - by Joseph Silvashy

  When I telnet to my server thats running postfix and try to send an email: MAIL FROM:<[email protected]> #=> 250 2.1.0 Ok RCPT TO:<[email protected]> #=> 554 5.7.1 <[email protected]>: Relay access denied I couldn't really find the answer on the site or by looking at other users question/answers, I'm not sure where to start. Ideas? Update So basically looking at the docs: http://www.postfix.org/SMTPD_ACCESS_README.html (section: Getting selective with SMTP access restriction lists), I don't seem to have any of those directives in etc/postfix/main.cf like smtpd_client_restrictions = permit_mynetworks, reject or any of the other ones, so I'm quite confused. But really I'm going to have a rails app connect to the server and send the emails, so I'm not sure how to handle it. Here is what my config file looks like: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = rerecipe-utils alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = $myhostname, localhost.$mydomain, localhost, mail.rerecipe.com, rerecipe.com relayhost = mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all mynetworks = 127.0.0.0/8 204.232.207.0/24 10.177.64.0/19 [::1]/128 [fe80::%eth0]/64 [fe80::%eth1]/64 Something to note is that relayhost is blank, this is the default configuration file that was created when I installed Postfix, when testing to connect with openssl I get this: ~% openssl s_client -connect mail.myhostname.com:25 -starttls smtp CONNECTED(00000003) depth=0 /CN=myhostname verify error:num=18:self signed certificate verify return:1 depth=0 /CN=myhostname verify return:1 --- Certificate chain 0 s:/CN=myhostname i:/CN=myhostname --- Server certificate -----BEGIN CERTIFICATE----- MIIBqTCCARICCQDDxVr+420qvjANBgkqhkiG9w0BAQUFADAZMRcwFQYDVQQDEw5y ZXJlY2lwZS11dGlsczAeFw0xMDEwMTMwNjU1MTVaFw0yMDEwMTAwNjU1MTVaMBkx FzAVBgNVBAMTDnJlcmVjaXBlLXV0aWxzMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB iQKBgQDODh2w4A1k0qiPNPhkrPj8sfkxpKPTk28AuZhgOEBYBLeHacTKNH0jXxPv P3TyhINijvvdDPzyuPJoTTliR2EHR/nL4DLhr5FzhV+PB4PsIFUER7arx+1sMjz6 5l/Ubu1ppMzW9U0IFNbaPm2AiiGBQRCQN8L0bLUjzVzwoSRMOQIDAQABMA0GCSqG SIb3DQEBBQUAA4GBALi2vvk9TGKJubXYJbU0PKmVmsfzFK35yLqr0keiDBhK2Leg 274sWxEH3ds8mUaRftuFlXb7RYAGNlVyTuMTY3CEcnqIsH7F2McCUTpjMzu/o1mZ O/B21CelKetBd1u79Gkrv2vWyN7Csft6uTx5NIGG2+pGi3r0gX2r0Hbu2K94 -----END CERTIFICATE----- subject=/CN=myhostname issuer=/CN=myhostname --- No client certificate CA names sent --- SSL handshake has read 1203 bytes and written 360 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 1AA4B8BFAAA85DA9ED4755194C50311670E57C35B8C51F9C2749936DA11918E4 Session-ID-ctx: Master-Key: 9B432F1DE9F3580DCC6208C76F96631DC5A4BC517BDBADD5F514414DCF34AC526C30687B96C5C4742E9583555A118232 Key-Arg : None Start Time: 1292985376 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN Oddly enough when I try to send an email from the machine itself it does work: echo test | mail -s "test subject" [email protected]

  Read the article

• Is it possible to "stealth" dual boot a machine?

  - by BrianH

  I have a loaner laptop that has MS Windows with locked down permissions. It works okay for what I need to do, but I started wondering if there was a way to install a separate Windows OS on a separate hard drive to do what I want to do on it. Virtual I wish I could use VirtualBox or VMWare, but that is not an option (I even tried VBox portable). External Drive My next trial was see if it was possible to install Windows on an external drive, and then plug that drive in and boot from it whenever I wanted my own OS. After a few Google searches, I see that is not really a possibility. Swap Primary Drive Another option, would be to get a second internal hard drive, take the existing HD out, and install a new Windows OS on the secondary HD. This would mean swapping the internal hard drive each time I want to switch OSs - doable, but not very convenient. Dual Boot The laptop has an expansion slot where a second hard drive can be plugged in quickly. I thought about Dual booting, but I don't want to mess with the MBR on the primary hard drive. When I have to give the laptop back, I don't want a dual-boot screen to popup. Summary Is there a way to have 2 hard-drives on a machine, each with it's own OS, and maybe use BIOS settings to have only 1 hard drive active at a time? That way both hard drives could be physically connected, but only one would actually be active at a time. I basically want a second OS that does not (can not) affect the existing OS in any way, and can be removed at any time without affecting the existing OS. The secondary OS does not need any of the files on the main hard drive - it's basically like having 2 separate computers using the same hard ware... Is this possible, or would it be easier just to go out and buy a different laptop? Thanks in advance! EDIT I just discovered that my BIOS allows me to pick (at startup) which hard drive I want to boot from. I poked around in the BIOS and there is not a place to disable certain devices, like the primary hard drive. My only concern about plugging in a second hard drive and installing Windows to the second hard drive is that it will mess with the primary hard drive, or add a bootloader screen to pick which windows install to use. My thought would be to physically unplug the primary, plug in the secondary and install windows to the secondary. After the install is working properly, I can plug the primary back in and use the BIOS feature to determine which drive to boot to. Is there any way after I have 2 separate installs on 2 separate hard drives that one of the installs could mess with the MBR on the other drive?

  Read the article

• Subdomains, folders, internationalization, and hosting solutions

  - by justinbach

  I'm a web developer and I recently landed a gig to develop the US / international version of a site for a company that's big in Europe but hasn't done much expansion into the US yet. They've got an existing site at company.com, which should remain visible to European customers after the new site goes up, and an existing (not great) site at company.us, which I'm going to be redeveloping (the .us site will be taken down when my version goes up--keep reading for details). My solution needs to take into account the fact that there are going to be new, localized versions of the site in the fairly near future, so the framework I'm writing needs to be able to handle localizations fairly easily (dynamically load language packs, etc). The tricky thing is the European branch of the company manages the .com site hosting (IIS-based) and the DNS, while I'll be managing the US hosting (and future localizations), which will likely be apache-based. I've never been a big fan of the ".us" TLD--I think most US users are accustomed to visiting the .com--so the thought is that the European branch will detect the IP of inbound traffic and redirect all US-based addresses to us.example.com (or whatever the appropriate localized subdomain might be), which would point to the IP address of my host. I'd then serve the appropriate locale-specific content by pulling the subdomain from the $_SERVER superglobal (assuming PHP). I couldn't find any examples of international organizations that take a subdomain-based approach for localization, but I'm not sure I have any other options as a result of the unique hosting structure here (in that there's not a unified hosting solution for the European and US sites). In my experience, the US version of an international site would live at domain.com/us, not at us.domain.com, and I'd imagine that this has to do with SEO (subdomains are treated as separate sites, so improved rankings for the US site wouldn't help the Canadian version if subdomains are used to differentiate between them). My question is: is there a better approach to solving this problem than the one I'm taking? Ideally, I'd like to use a folder-based approach (see adidas.com as an example of what I'm talking about), but I'm not sure that's a possibility given that the US site (and other localizations) will not be hosted on the same server as the rest of the .com. Can you, in IIS, map a folder (e.g. domain.com/us) to a different IP address? What would you recommend? Thanks for your consideration.

  Read the article

• Windows Azure Use Case: Hybrid Applications

  - by BuckWoody

  This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx  Description: Organizations see the need for computing infrastructures that they can “rent” or pay for only when they need them. They also understand the benefits of distributed computing, but do not want to create this infrastructure themselves. However, they may have considerations that prevent them from moving all of their current IT investment to a distributed environment: Private data (do not want to send or store sensitive data off-site) High dollar investment in current infrastructure Applications currently running well, but may need additional periodic capacity Current applications not designed in a stateless fashion In these situations, a “hybrid” approach works best. In fact, with Windows Azure, a hybrid approach is an optimal way to implement distributed computing even when the stipulations above do not apply. Keeping a majority of the computing function in an organization local while exploring and expanding that footprint into Windows and SQL Azure is a good migration or expansion strategy. A “hybrid” architecture merely means that part of a computing cycle is shared between two architectures. For instance, some level of computing might be done in a Windows Azure web-based application, while the data is stored locally at the organization. Implementation: There are multiple methods for implementing a hybrid architecture, in a spectrum from very little interaction from the local infrastructure to Windows or SQL Azure. The patterns fall into two broad schemas, and even these can be mixed. 1. Client-Centric Hybrid Patterns In this pattern, programs are coded such that the client system sends queries or compute requests to multiple systems. The “client” in this case might be a web-based codeset actually stored on another system (which acts as a client, the user’s device serving as the presentation layer) or a compiled program. In either case, the code on the client requestor carries the burden of defining the layout of the requests. While this pattern is often the easiest to code, it’s the most brittle. Any change in the architecture must be reflected on each client, but this can be mitigated by using a centralized system as the client such as in the web scenario. 2. System-Centric Hybrid Patterns Another approach is to create a distributed architecture by turning on-site systems into “services” that can be called from Windows Azure using the service Bus or the Access Control Services (ACS) capabilities. Code calls from a series of in-process client application. In this pattern you move the “client” interface into the server application logic. If you do not wish to change the application itself, you can “layer” the results of the code return using a product (such as Microsoft BizTalk) that exposes a Web Services Definition Language (WSDL) endpoint to Windows Azure using the Application Fabric. In effect, this is similar to creating a Service Oriented Architecture (SOA) environment, and has the advantage of de-coupling your computing architecture. If each system offers a “service” of the results of some software processing, the operating system or platform becomes immaterial, assuming it adheres to a service contract. There are important considerations when you federate a system, whether to Windows or SQL Azure or any other distributed architecture. While these considerations are consistent with coding any application for distributed computing, they are especially important for a hybrid application. Connection resiliency - Applications on-premise normally have low-latency and good connection properties, something you’re not always guaranteed in a distributed and hybrid application. Whether a centralized client or a distributed one, the code should be able to handle extended retry logic. Authorization and Access - In a single authorization environment like a Active Directory domain, security is handled at a user-password level. In a distributed computing environment, you have more options. You can mitigate this with  using The Windows Azure Application Fabric feature of ACS to make the Azure application aware of the App Fabric as an ADFS provider. However, a claims-based authentication structure is often a superior choice.  Consistency and Concurrency - When you have a Relational Database Management System (RDBMS), Consistency and Concurrency are part of the design. In a Service Architecture, you need to plan for sequential message handling and lifecycle. Resources: How to Build a Hybrid On-Premise/In Cloud Application: http://blogs.msdn.com/b/ignitionshowcase/archive/2010/11/09/how-to-build-a-hybrid-on-premise-in-cloud-application.aspx  General Architecture guidance: http://blogs.msdn.com/b/buckwoody/archive/2010/12/21/windows-azure-learning-plan-architecture.aspx   

  Read the article

• Off The Beaten Path—Three Things Growing Midsize Companies are Thankful For

  - by Christine Randle

  By: Jim Lein, Senior Director, Oracle Accelerate Last Sunday I went on a walkabout.  That’s when I just step out the door of my Colorado home and hike through the mountains for hours with no predetermined destination. I favor “social trails”, the unmapped routes pioneered by both animal and human explorers.  These tracks  are usually more challenging than established, marked routes and you can’t be 100% sure of where you’re going to end up. But I’ve found the rewards to be much greater. For awhile, I pondered on how—depending upon your perspective—the current economic situation worldwide could be viewed as either a classic “the glass is half empty” or a “the glass is half full” scenario. Midsize companies buy Oracle to grow and so I’m continually amazed and fascinated by the success stories our customers relate to me.  Oracle’s successful midsize companies are growing via innovation, agility, and opportunity. For them, the glass isn’t half full—it’s overflowing. Growing Midsize Companies are Thankful for: Innovation The sun angling through the pine trees reminded me of a conversation with a European customer a year ago May.  You might not recognize the name but, chances are, your local evening weather report relies on this company’s weather observation, monitoring and measurement products.  For decades, the company was recognized in its industry for product innovation, but its recent rapid growth comes from tailoring end to end product and service solutions based on the needs of distinctly different customer groups across industrial, public sector, and defense sectors.  Hours after that phone call I was walking my dog in a local park and came upon a small white plastic box sprouting short antennas and dangling by a nylon cord from a tree branch.  I cut it down. The name of that customer’s company was stamped on the housing. “It’s a radiosonde from a high altitude weather balloon,” he told me the next day. “Keep it as a souvenir.”  It sits on my fireplace mantle and elicits many questions from guests. Growing Midsize Companies are Thankful for: Agility In July, I had another interesting discussion with the CFO of an Asia-Pacific company which owns and operates a large portfolio of leisure assets. They are best known for their epic outdoor theme parks. However, their primary growth today is coming from a chain of indoor amusement centers in the USA where billiards, bowling, and laser tag take the place of roller coasters, kiddy rides, and wave pools. With mountains and rivers right out my front door, I’m not much for theme parks, but I’ll take a spirited game of laser tag any day.  This company has grown dramatically since first implementing Oracle ERP more than a decade ago. Their profitable expansion into a completely foreign market is derived from the ability to replicate proven and efficient best business practices across diverse operating environments.  They recently went live on Oracle’s Fusion HCM and Taleo. Their CFO explained to me how, with thousands of employees in three countries, Fusion HCM and Taleo would enable them to remain incredibly agile by acting on trends linking individual employee performance to their management, establishing and maintaining those best practices. Growing Midsize Companies are Thankful for: Opportunity I have three GPS apps on my iPhone. I use them mainly to keep track of my stats—distance, time, and vertical gain. However, every once in awhile I need to find the most efficient route back home before dark from my current location (notice I didn’t use the word “lost”). In August I listened in on an interview with the CFO of another European company that designs and delivers telematics solutions—the integrated use of telecommunications and informatics—for managing the mobile workforce. These solutions enable customers to achieve evolutionary step-changes in their performance and service delivery. Forgive the overused metaphor, but this is route optimization on steroids.  The company’s executive team saw an opportunity in this emerging market and went “all in”. Consequently, they are being rewarded with tremendous growth results and market domination by providing the ability for their clients to collect and analyze performance information related to fuel consumption, service workforce safety, and asset productivity. This Thanksgiving, I’m thankful for health, family, friends, and a career with an innovative company that helps companies leverage top tier software to drive and manage growth. And I’m thankful to have learned the lesson that good things happen when you get off the beaten path—both when hiking and when forging new routes through a complex world economy. Halfway through my walkabout on Sunday, after scrambling up a long stretch of scree-covered hill, I crested a ridge with an obstructed view of 14,265 ft Mt Evans just a few miles to the west.  There, nowhere near a house or a trail, someone had placed a wooden lounge chair. Its wood was worn and faded but it was sturdy. I had lunch and a cold drink in my pack. Opportunity knocked and I seized it. Happy Thanksgiving.  

  Read the article

• It&rsquo;s A Team Sport: PASS Board Year 2, Q3

  - by Denise McInerney

  As I type this I’m on an airplane en route to my 12th PASS Summit. It’s been a very busy 3.5 months since my last post on my work as a Board member. Nearing the end of my 2-year term I am struck by how much has happened, and yet how fast the time has gone. But I’ll save the retrospective post for next time and today focus on what happened in Q3. In the last three months we made progress on several fronts, thanks to the contributions of many volunteers and HQ staff members. They deserve our appreciation for their dedication to delivering for the membership week after week. Virtual Chapters The Virtual Chapters continue to provide many PASS members with valuable free training. Between July and September of 2013 VCs hosted over 50 webinars with a total of 4300 attendees. This quarter also saw the launch of the Security & Global Russian VCs. Both are off to a strong start and I welcome these additions to the Virtual Chapter portfolio. At the beginning of 2012 we had 14 Virtual Chapters. Today we have 22. This growth has been exciting to see. It has also created a need to have more volunteers help manage the work of the VCs year-round. We have renewed focus on having Virtual Chapter Mentors work with the VC Leaders and other volunteers. I am grateful to volunteers Julie Koesmarno, Thomas LeBlanc and Marcus Bittencourt who join original VC Mentor Steve Simon on this team. Thank you for stepping up to help. Many improvements to the VC web sites have been rolling out over the past few weeks. Our marketing and IT teams have been busy working a new look-and-feel, features and a logo for each VC. They have given the VCs a fresh, professional look consistent with the rest of the PASS branding, and all VCs now have a logo that connects to PASS and the particular focus of the chapter. 24 Hours of PASS The Summit Preview edition  of 24HOP was held on July 31 and by all accounts was a success. Our first use of the GoToWebinar platform for this event went extremely well. Thanks to our speakers, moderators and sponsors for making this event possible. Special thanks to HQ staffers Vicki Van Damme and Jane Duffy for a smoothly run event. Coming up: the 24HOP Portuguese Edition will be held November 13-14, followed December 12-13 by the Spanish Edition. Thanks to the Portuguese- and Spanish-speaking community volunteers who are organizing these events. July Board Meeting The Board met July 18-19 in Kansas City. The first order of business was the election of the Executive Committee who will take office January 1. I was elected Vice President of Marketing and will join incoming President Thomas LaRock, incoming Executive Vice President of Finance Adam Jorgensen and Immediate Past President Bill Graziano on the Exec Co. I am honored that my fellow Board members elected me to this position and look forward to serving the organization in this role. Visit to PASS HQ In late September I traveled to Vancouver for my first visit to PASS HQ, where I joined Tom LaRock and Adam Jorgensen to make plans for 2014.  Our visit was just a few weeks before PASS Summit and coincided with the Board election, and the office was humming with activity. I saw first-hand the enthusiasm and dedication of everyone there. In each interaction I observed a focus on what is best for PASS and our members. Our partners at HQ are key to the organization’s success. This week at PASS Summit is a great opportunity for all of us to remember that, and say “thanks.” Next Up PASS Summit—of course! I’ll be around all week and look forward to connecting with many of our member over meals, at the Community Zone and between sessions. In the evenings you can find me at the Welcome Reception, Exhibitor’s Reception and Community Appreciation Party. And I will be at the Board Q&A session  Friday at 12:45 p.m. Transitions The newly elected Exec Co and Board members take office January 1, and the Virtual Chapter portfolio is transitioning to a new director. I’m thrilled that Jen Stirrup will be taking over. Jen has experience as a volunteer and co-leader of the Business Intelligence Virtual Chapter and was a key contributor to the BI VCs expansion to serving our members in the EMEA region. I’ll be working closely with Jen over the next couple of months to ensure a smooth transition.

  Read the article

• DVD not detected?

  - by Benjamin

  As i insert a DVD in my drive (on a laptop) using Kubuntu 12.04, the DVD is not detected. The drive takes the DVD, I can hear it munching on it for a while, and then nothing. Even ejecting the DVD becomes a hassle, I need to do that at boot time otherwise the OS won't allow me to eject. Kubuntu 12.04 used to read and mount the same DVDs just fine a week ago. Edit: since I am able to boot from CD, can I safely assume the issue is not a hardware issue? How can I fix this? wodim --devices returns: wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'Optiarc' 'DVD+-RW AD-7640A' ------------------------------------------------------------------------- sudo lshw -class disk returns: *-cdrom description: DVD-RAM writer product: DVD+-RW AD-7640A vendor: Optiarc physical id: 0.0.0 bus info: scsi@3:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/dvdrw2 logical name: /dev/sr0 version: JD06 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=open lspci returns: 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:05.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 08:05.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 08:05.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) and lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0c45:63e0 Microdia Sonix Integrated Webcam Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader The /etc/modprobe.d/blacklist.conf contains: # This file lists those modules which we don't want to be loaded by # alias expansion, usually so some other driver will be loaded for the # device instead. # evbug is a debug tool that should be loaded explicitly blacklist evbug # these drivers are very simple, the HID drivers are usually preferred blacklist usbmouse blacklist usbkbd # replaced by e100 blacklist eepro100 # replaced by tulip blacklist de4x5 # causes no end of confusion by creating unexpected network interfaces blacklist eth1394 # snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much # hardware on its own (Ubuntu bug #2011, #6810) blacklist snd_intel8x0m # Conflicts with dvb driver (which is better for handling this device) blacklist snd_aw2 # causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306) blacklist i2c_i801 # replaced by p54pci blacklist prism54 # replaced by b43 and ssb. blacklist bcm43xx # most apps now use garmin usb driver directly (Ubuntu: #114565) blacklist garmin_gps # replaced by asus-laptop (Ubuntu: #184721) blacklist asus_acpi # low-quality, just noise when being used for sound playback, causes # hangs at desktop session start (Ubuntu: #246969) blacklist snd_pcsp # ugly and loud noise, getting on everyone's nerves; this should be done by a # nice pulseaudio bing (Ubuntu: #77010) blacklist pcspkr # EDAC driver for amd76x clashes with the agp driver preventing the aperture # from being initialised (Ubuntu: #297750). Blacklist so that the driver # continues to build and is installable for the few cases where its # really needed. blacklist amd76x_edac

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17  | Next Page >