Search Results

Search found 654 results on 27 pages for 'hdmi'.

Page 14/27 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • (Arch)Linux board with dual ethernet

    - by tekknolagi
    I am looking for a Linux board with the following requirements: 2 ethernet ports (helpful, but only 1 required) 2 USB ports SDXC support (for SD/MicroSD) WiFi (25 concurrent users ideally) HDMI or micro HDMI out I don't know of a good way to find boards. I went through and catalogued a bunch in a spreadsheet, though: https://docs.google.com/spreadsheets/d/1ZyWvg1u5jAeCq4ghpQv3fukl78nYO64utfQgzTP1r7w/edit?usp=sharing

    Read the article

  • Hooking up a mac to an HDTV

    - by user4941
    I've got a mac with a firewire port but no HDMI port. I want to connect it to my HDTV. I've done this many times with a PC via HDMI and Svideo, but I'm not sure how to connect my new MacBook Pro to my HDTV. Any ideas?

    Read the article

  • Display resolution problem with Sony TV and Intel integrated graphics

    - by user96195
    I am trying to set the correct display resolution for my Sony TV (KDL-32V2000, native resolution 1366x768) connected via HDMI to my HTPC running Ubuntu 12.04. I have a Intel Core i3-530 and Intel mobo (DH57JG), so no proprietary graphics drivers. The problem is that I can't get the correct resolution to display on the TV. Initially I only had 1024x768 (or similar) as a maximum resolution, which was not displayed properly. I tried a few steps, including generating an xorg.conf (initially didn't have one) and adding the segment as described in this post regarding this particular TV. I couldn't get this to work, and at this stage have reverted to running without an xorg.conf. Another post suggested upgrading to kernel 3.5, which did give me a 1920x1080 resolution option. This results in the TV cutting off a fair bit of the edges of the screen. My Dell laptop with ATI drivers recognises the TV screen and works well via HDMI. Any idea how to proceed?

    Read the article

  • Triple monitor setup with an ATI Radeon 4200?

    - by Ben Clapp
    I have a relatively new Powerspec computer (i5 quad core processor, about a year or two old) and just grabbed a new relatively inexpensive ($40?) graphics card. It has 1 DVI, one VGA, and one HDMI output. I have two (different type) monitors plugged into the DVI and VGA slots, and they work great. However, I cannot seem to be able to get a third monitor in the HDMI slot to work. I can see the monitor (and monitor info) show up in display settings. However, if I try to switch the monitor to 'on' and click apply, nothing happens. Anyone have the slightest idea what the problem might be? (It's a Radeon graphics card FYI; if I remember right I think it was the Radeon 4200?)

    Read the article

  • No sound from internal speaker but headphones OK

    - by Aris Boch
    The problem: The system won't play sound on the internal speaker of the laptop, but only on the headphone. When I put the headphone jack half in and fiddle around with it, then it'll play even on the internal speakers (the system apparently believes, that the headphone are in). What should I do? The technical data: Laptop modell Medion Erazer X6815 matatabisama@matatabisama-X6815:~/Downloads$ sudo aplay -l | egrep ^card card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] card 0: PCH [HDA Intel PCH], device 1: ALC269VB Digital [ALC269VB Digital] card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Ubuntu 12.04 64 matatabisama@matatabisama-X6815:~/Downloads$ uname -a Linux matatabisama-X6815 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

    Read the article

  • Sound is not working correctly on Ubuntu 12.04

    - by Jeggy
    I know this is my own fault. But what i did was this first i wrote this command 'sudo apt-get remove pulseaudio' and then i wrote again 'sudo apt-get install pulseaudio' and now the sound doesn't work properly And the Indicator doesn't work either, it's just grayed out. The shortcuts are not working either. Alsamixer is working, and this is the only way i change change the volume at the moment: jeggy@jeggy-XPS:~$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf1c00000 irq 52 jeggy@jeggy-XPS:~$ aplay -l **** List of PLAYBACK Hardware Devices **** ALSA lib conf.c:1686:(snd_config_load1) _toplevel_:11:0:Unexpected end of file ALSA lib conf.c:3406:(config_file_open) /etc/asound.conf may be old or corrupted: consider to remove or fix it /usr/bin/pulseaudio: error while loading shared libraries: libpulsecommon-1.1.so: cannot open shared object file: No such file or directory card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 VLC sound is not working, am getting this error:

    Read the article

  • Can I get the Waves Maxx speaker effects to work in Ubuntu?

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • Cheap sound on speakers - Dell XPS L502X

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • Thinkpad T530 with Optimus and Docking Station

    - by Vic Boudolf
    I have a Lenovo Thinkpad T530 with Optimus video, which is not supported on 12.04.1. I don't normally need the discrete (nVidia) graphics, so I turn it off in the BIOS settings to achieve longer battery life (and so that the screen dimmer will work), but when placed in the docking station, the integrated (Intel) graphics don't power the HDMI ports. (The VGA port does work, but I want to focus on the HDMI.) This means I have to change the BIOS settings constantly. Is there any way to have the system detect the docking station and power up/enable the discrete graphics accordingly? I don't need to do it on the fly. Just at startup. This post suggests that bumblebee can turn the discrete graphics on and off for specific applications, but I just want to turn it on or off. [2 suggests that vga_switcheroo will not work with nVidia Optimus.

    Read the article

  • Configure audio on HP ENVY 4 ultrabook

    - by phodu_insaan
    I want to configure audio for ubuntu 12.04 on my laptop. Currently the audio just does not play. If i try and plug in headphones then somewhere midway to being fully plugged in the audio plays on the headphones, I plug in further and the sound disappears. How do I get this to work? lspci | grep audio Audio device: Intel Corporation Panther Point High Definition Audio Controller My laptop is one the beats edition HP laptops, and the driver for win7 was an IDT HD audio driver. --EDIT-- The output for cat /proc/asound/card0/codec* | grep Codec is Codec: IDT 92HD91BXX Codec: Intel PantherPoint HDMI I need to get both the IDT card to work and the HDMI card to work with my TV. --EDIT-- --EDIT 2-- I have added blacklist snd-usb-audio to the end of the file /etc/modprobe.d/alsa-base.conf Now the sound plays from my laptop speakers only when I plug in a headphones/external speaker. Otherwise no sound. :( Please help getting everything working as it should. --EDIT 2-- Thanks

    Read the article

  • Dual monitor setup with Intel graphics and Nvidia Geforce GT 425M on 12.04

    - by fo_x86
    I have a Dell XPS L401x and just installed 12.04. I have a mini-display and an HDMI output, and I could hook up two Dell UltraSharp monitors to each port on Windows 7, and get a triple monitor setup. Doing a bit of research, it seems like the mini-display is wired to the integrated graphics card whereas HDMI is hooked up to Nvidia graphics card. I've also installed Bumblebee as it seemed like that was the proper way of installing Nvidia drivers on Ubuntu. At the moment none of my monitors is being recognized by Ubuntu. Is it even possible to have a triple monitor (laptop display + 2 external) setup? Has anyone successfully done this?

    Read the article

  • Problem with sound in Kubuntu 12.10

    - by Mihkel
    I'm really enjoying Kubuntu 12.10 experience, but the problem starts with sound. It wasn't here before, but today sound sounds garbled and echoed and wrong. It happens in Audacity and VLC. It doesn't happen when I test the sound devices nor when I use Amarok to play the music files (but come on, who uses Amarok to listen to a random music file, it's much more natural to use VLC for that ;-) ) Kubuntu/Phonon recognizes 2 sound devices: 1) RV770 HDMI Audio [Radeon HD 4850/4870] Digital Stereo [HDMI] 2) Built-in Audio Analog Stereo I know it has to use the second option, and it probably does, but that's not the case. What I did find out was that I had to rescan for audio devices in Audacity (and probably select "sysdefault") for it to sound normal. Why does it happen? I've tried following some other questions, but well.

    Read the article

  • How can I use two video cards to power three screens?

    - by notatoad
    I have two Radeon 6450 graphics cards in my computer, with three screens. Only the screens plugged into the first graphics card are recognized and configurable in the displays setting panel. How can I use the displays plugged into my second graphics card? Both cards are present in lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 01:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] 02:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 02:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] I'm using the open source driver instead of the proprietary driver because the proprietary driver won't output 1440x2560.

    Read the article

  • Independent sound device for headphones

    - by amfcosta
    I have an Asus K52Jc and in sound configuration there is no independent sound device for the headphones, and so there's no way to have independent volume for speakers and headphones. Is there a way to have independent devices? Or is this hardware specific? lshw reports that I have an "Intel 5 Series/3400 Series Chipset High Definition Audio". aplay -l reports: placa 0: Intel [HDA Intel], dispositivo 0: CONEXANT Analog [CONEXANT Analog] Subdispositivos: 1/1 Subdispositivo #0: subdevice #0 placa 0: Intel [HDA Intel], dispositivo 3: HDMI 0 [HDMI 0] Subdispositivos: 1/1 Subdispositivo #0: subdevice #0

    Read the article

  • ubuntu 12.04 sound not working in applications

    - by user109887
    I run Ubuntu on a DELL Vostro 3500 laptop. Everything was working perfectly since this morning, after an update... I can't play any multimedia sound anymore, that includes youtube and others, mp3 in Rythmbox, sound of video in VLC. I can see my device in the setting window and I can play tests sound, but nothing else. Any idea? EDIT: I'm switching very often from to HDMI output, which is deconnected right now. I've tried running VLC, and in the audio menu, you can choose the output so now I can listen to music via VLC but not with other programs. Looks like ubuntu is not totally switching the audio device after unplugging the HDMI cable. Is there any command line which can do so?

    Read the article

  • No sound ubuntu 12.04, Tried everything

    - by user74679
    I've tried to find a solution to this but haven't been able to yet. I'm using ubuntu 12.04 installing using wubi installer. I have no audio. I can see the sound icon on the bar on top and interact with it. It doesn't say mute, it seems normal. "Codec:" /proc/asound/card*/codec* proc/asound/card0/codec#0:Codec: IDT 92HD75B3X5 proc/asound/card0/codec#1:Codec: LSI ID 1040 proc/asound/card1/codec#0:Codec: ATI R6xx HDMI Alsa shows all bars full for IDT 92HD75B3X5, no bars for ATI HDMI. Please help. I've reinstalled all drivers as well.

    Read the article

  • What is the "don't force full gpu scalling" configuration in the newest Nvida driver settings?

    - by wild_oscar
    I have a Zotac Ion board on a computer running Linux ad I had the driver version 295.xx. I was trying to run a 1080 video on XBMC and, because playback was a bit sluggish, part of my (unsuccessful) attempt at making it run smoothly was to upgrade the Nvidia driver. The problem is that the computer is connected by HDMI to a Pioneer A/V system - which in turn is connected to the TV (also through HDMI). When I created this set up I didn't get any image on my tv until I Unchecked "force full gpu scaling" in "Flat Panel Scaling". After upgrading the Nvidia driver I no longer have image. Upon investigating, I saw on the release changelog: Removed Flat Panel Scaling configurability in nvidia-settings. Any desired scaling can be configured through the new "ViewPortIn" and "ViewPortOut" MetaMode attributes. I know very little about this, however, so I'm lost. What would the correct configuration be with these new ViewPortIn/Out options to achieve the same result as "unchecking force full gpu scalling"?

    Read the article

  • Fix overscan in Linux with Intel graphics Vizio HDTV

    - by Padenton
    I am connecting my server to my HDTV so that I can conveniently display it there. My VIZIO HDTV cuts off all 4 edges. I already realize it is not optimal to be running a GUI on a server; this server will not have much external traffic so I prefer it for convenience. I have already spent countless hours searching for a fix, but all I could find required an ATI or NVIDIA graphics card, or didn’t work. In Windows, the Intel driver has a setting for underscan, though it seems only to be available by a glitch. Here’s my specs: Ubuntu Linux (Quantal 12.10) (Likely to switch to Arch) This is a home server computer, with KDE for managing(for now, at least) Graphics: Intel HD Graphics 4000 from Ivy Bridge Motherboard: ASRock Z77 Extreme4 CPU: Intel Core i5-3450 My monitors: Dell LCD monitor Vizio VX37L_HDTV10A 37" on HDMI input I have tried all of the following from both HDMI?HDMI and DVI?HDMI cables connected to the ports on my motherboard: Setting properties in xrandr Making sure drivers are all up to date Trying several different modes The TV was “cheap”; max resolution 1080i. I am able to get a 1920x1080 modeline, in both GNU/Linux and Windows, without difficulty. There is no setting in the menu to fix the overscan (I have tried all of them, I realize it’s not always called overscan). I have been in the service menu for the TV, which still does not contain an option to fix it. No aspect ratio settings, etc. The TV has a VGA connector but I am unsure if it would fix it, as I don’t have a VGA cable long enough, and am not sure it would get me the 1920x1080 resolution which I want. Using another resolution does not fix the problem. I tried custom modelines with the dimensions of my screen’s viewable area, but it wouldn’t let me use them. Ubuntu apparently doesn’t automatically generate an xorg.conf file for use. I read somewhere that modifying it may help solve it. I tried X -configure several times(with reboots, etc.) but it consistently gave the following error messages: In log file: … (WW) Falling back to old probe method for vesa Number of created screens does not match number of detected devices. Configuration failed. In output: … (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Number of created screens does not match number of detected devices. Configuration failed. Server terminated with error (2). Closing log file. Tried using 'overscan' prop in xrandr: root@xxx:/home/xxx# xrandr --output HDMI1 --set overscan off X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 11 (RRQueryOutputProperty) Serial number of failed request: 42 Current serial number in output stream: 42 'overscan on', 'underscan off', 'underscan on' were all also tried. Originally tried with Ubuntu 12.04, but failed and so updated to 12.10 when it was released. All software is up to date. I am not opposed to reinstalling my OS, likely will anyways (my preference being Arch).

    Read the article

  • Surface V2.0

    - by Dennis Vroegop
    It’s been quiet around here. And the reason for that is that it’s been quiet around Surface for a while. Now, a lot of people assume that when a product team isn’t making too much noise that must mean they stopped working on their product. Remember the PDC keynote in 2010? Just because they didn’t mention WPF there a lot of people had the idea that WPF was dead and abandoned for Silverlight. Of course, this couldn’t be farther from the truth. The same applies to Surface. While we didn’t hear much from the team in Redmond they were busy putting together the next version of the platform. And at the CES in January the world saw what they have been up to all along: Surface V2.0 as it’s commonly known. Of course, the product is still in development. It’s not here yet, we can’t buy one yet. However, more and more information comes available and I think this is a good time to share with you what it’s all about! The biggest change from an organizational point of view is that Microsoft decided to stop producing the hardware themselves. Instead, they have formed a partnership with Samsung who will manufacture the devices. This means that you as a buyer get the benefits of a large, worldwide supplier with all the services they can offer. Not that Microsoft didn’t do that before but since Surface wasn’t a ‘big’ product it was sometimes hard to get to the right people. The new device is officially called the “Samsung SUR 40 for Microsoft Surface” which is quite a mouthful. The software that runs the device is of course still coming from Microsoft. Let’s dive into the technical specs (note: all of this is preliminary, it’s still in the Alpha phase!): Audio out HDMI / StereoRCA / SPDIF / 2 times 3.5mm audio out jack Brightness 300 CD/m2 Communications 1GB Ethernet/802.11/Bluetooth Contrast Ratio 1:1000 CPU AMD Athlon X2 245e 2.9Ghz Dual Core Display Resolution Full HD 1080p 1920x1080 / 16:9 aspect ratio GPU AMD Radeon HD 6750 1GB GDDRS HDD 320 GB / 7200 RPM HDMI In / HDMI out Yes I/O Ports 4 USB, SD Card reader Operation System Embedded Windows 7 Professional 64 bits Panel Size 40” diagonal Protection Glass Gorilla Glass RAM 4 GB DD3 Weight / with standard legs 70.0 Kg / 154 lbs Weight / standalone 39.5 Kg / 87 lbs Height (without legs) 4 inch Contact points recognized > 50 Cool Factor Extremely   Ok, the last point is not official, but I do think it needs to be there. Let’s talk software. As noted, it runs Windows 7 Professional 64 bit, which means you can run Visual Studio 2010 on it. The software is going to be developed in WPF4.0 with the additional Surface SDK 2.0. It will contain all the things you’ve seen before plus some extra’s. They have taken some steps to align it more with the Surface Toolkit which you can download today, so if you do things right your software should be portable between a WPF4.0 Windows 7 Multi-touch app and the Surface v2 environment. It still uses infrared to detect contacts, so in that respect nothing much has changed conceptually. We still can differentiate between a finger, a tag or a blob. Of course, since the new platform has a much higher resolution (compared to the 1024x768 of the first version) you might need to look at your code again. I’ve seen a lot of applications on Surface that assume the old resolution and moving that to V2 is going to be some work. To be honest: as I am under NDA I cannot disclose much about the new software besides what I have told you here, but trust me: it’s going to blow people away. Now, the biggest question for me is: when can I get one? Until we can, have a look here: Tags van Technorati: surface,samsung,WPF

    Read the article

  • Impressions of my ASUS eee slate EP121 - Dual core 4GB, 64GB SSD

    - by tonyrogerson
    This thing is lovely, very nice bluetooth keyboard that has nice feedback on the keypress, there is no mouse but you can use the stylus or get yourself a bluetooth mouse, me, I've opted for a Microsoft ARC mouse which is a delight to use, the USB doors are a pain to open for the first time if like me you don't have any finger nails. It came as a suprise that the slate shows four processors, Dual Core with multi-threading, I didn't really look at the processor I was more interested in the amount of memory and the SSD; you don't get the full 4GB even with the 64 bit version of Windows 7 installed (which I immediately upgraded to Ultimate through my MSDN subscription). The box is extremely responsive - extremely, it loads Winword in literally a second. I've got office 2010 and onenote 2010 on there now; one problem is that on applying all (43) windows updates since the upgrade the machine is still sat on step 3 of 3 on the start up configuring updates screen after about an hour, you can't turn this machine off without using a paper clip to reset it and as I have just found you need a paper clip :). Installing Windows 7 SP1 was effortless. One of the first things I did on it was to reduce the size of the font, by default its set at 125%, my eye sight is ok :) so I've set that back down. Amazon Kindle for the PC works really well, plenty of text on the screen when viewed portrait, the case it comes with also allows the slate to stand up in various positions - portrait, horizontal - seems stable enough. The wireless works well, seems to have a better signal than my other two laptop machines which is good news. The gadget passed the pose test at work :). I use offline files to keep a copy of all my work stuff locally, I'm not sure what it is, well, its probably my server but whenever I try and sync it runs for a couple of minutes then fails with network name no longer contactable, funnily enough its fine from my big laptop so I can only guess this may be a driver type issue on the EP121 itself - very odd and very annoying. I do a lot of presenting and need to plug into a VGA project because most sites that's all that is offered, the EP121 has a mini-hdmi output which is great except for this scenario, hdmi is digital, vga is analogue, you will struggle to find a cost effective solution, I found HDFury and also a device HP do, however, a better solution appears to be getting a USB graphics adapter for instance the one I've ordered is the ClimaxDigital USB 2.0 to DVI,VGA or HDMI Adaptor which gives everything I need - VGA and DVI output and great resolution as well - ok, so fingers crossed because I'm presenting next Wednesday in Edinburgh and not taking my 300kg lenovo w700 (I'm sure my back just sighed in relief) - it certainly works really well on my LED TV, the install was simple - it just works! One of the several reasons for buying this piece of kit was to use it on my LED TV to remote into my main machine to check stuff whilst sat in my living room, also to watch webcasts and lecture videos in comfort away from my office, because of the wireless speed and limitation I'm opting for a USB network adapter from Belkin - that will also allow me to take advantage of my home gigabit network, there are only 2 usb ports on the slate so I'm going to knock up a hub so connecting it in is straight forward and simple, I'm also going to purchase a second power supply so I don't have to faff about with that either.I now have the developer x64 edition of SQL Server 2008 R2, yes everything :) - about 16GB left to play with on the machine now but that will be fine, I'll put AdventureWorks on there so I can play and demo stuff which is all I'm after from this, my development machine is significantly more powerful and meets my storage needs too.Travel test this weekend and next week, I'm in Dundee for my final exam for the masters degree.

    Read the article

  • Best triple head display setup

    - by dgel
    I'm currently running Ubuntu 12.04 with a darn good triple head display setup. I've got a VisionTek 900530 Radeon HD 5450 512MB DDR3 PCI Express video card that has two DVI outputs and one Mini DisplayPort that I have connected to a HDMI adapter. I'm running three identical Asus 1920x1080 monitors that each have a DVI, VGA, and HDMI input. I'm using the xorg-edgers ppa, so I'm using the open source radeon driver version 6.99.99. I tried using the ATI binary fglrx driver, but I wasn't able to get the three monitors working properly- the monitor connected via HDMI / DisplayPort wouldn't run at full resolution. The setup is almost perfect: Compiz runs fine and is quite snappy. I'm not able to use that great compiz feature where you can drag a window to the side of a display and it will half maximize. I occasionally experience display corruption weirdness with Unity and need to restart it. When I use a dropdown menu in LibreOffice it often pops the menu down in another window. For example, if I'm using the center monitor and click the Insert menu, the menu pulls down on the monitor to my right, forcing me to chase it. If I chase down the menu and choose Manual Break, the dialog appears over on my left monitor. This absurdity is mildly entertaining but has lost its novelty. I've decided to build a new system and have spared no expense- latest i7 processor, SSD, etc. I really like the performance of the Nvidia binary drivers, so I put two ZOTAC ZT-40707-10L GeForce GT 440 in the system, figuring I'd have four DVI outputs and an awesome triple (or even eventually quad) head setup. Unfortunately it appears that I didn't do sufficient research before my purchase. It seems that Nvidia TwinView only supports two monitors on one card (I guess that's why they call it TwinView...). I messed around with running two X servers, but I really don't want that- being able to drag windows to any monitor is critical. It doesn't sound like Xinerama is an option because from what I understand it simply doesn't support Compiz. I've seen a BaseMosaic option that can be used with the Nvidia drivers that appears to support an almost unlimited number of heads- unfortunately me cheap little cards don't support it. I'm also not sure whether you'll still have all nice maximizing and snapping that TwinView provides, or whether Ubuntu will only see it as one massive display. I put my old trusty ATI card into my new system and installed 12.10. I'm using the opensource radeon drivers again because even in 12.10 I can't get the fglrx binary drivers to do triple head. Unfortunately, even with an unbelievably powerful system the experience is extremely sluggish (much more so than my experience in 12.04). The menu scattering problem appears to be fixed, but I get a lot of nasty Unity display corruption. So finally, my question is this: What hardware / drivers should I use? I'm willing to buy (almost) any video card(s). I have two PCI-Express 3.0 slots on my motherboard (which has an integrated Intel HD card). I'm willing to use ATI or Nvidia cards and willing to run Ubuntu 12.04.1 or 12.10. I'm not a gamer, but do want beautiful and snappy Compiz effects. Does anyone out there have the perfect triple head setup in 12.04 or 12.10? What hardware / drivers are you using? I have those two Nvidia cards but will probably be returning them unless someone knows a way to use them together for a triple head setup. Since I'm having pretty good luck with a single ATI card providing three displays, should I just buy a beefier one with the hopes that it will fix the horrible sluggishness I'm experiencing in 12.10?

    Read the article

  • How can I stop Ubuntu from playing audio from 2 interfaces at the same time?

    - by Solignis
    Hi there, I just loaded Ubuntu 10.10 Maverick on my home machine. The machine is running a Core2Duo E6750 on an MSI motherboard with an Nvidia GTX260-OC Graphics card. The problem I am having as stated in the title is for some reason Ubuntu is playing audio through my headphone coming out from the computer and it is also playing the audio at the exact same time through the HDMI connection coming out of the graphics card, it has a plug to allow this. What is going on, I have never seen this before. Most importantly of all can it be fixed so that I can sepertate the 2 interfaces, the one is a standard PC audio IO and the HDMI one is connected through the mobo's internal SPDIF. More information can be provided if required.

    Read the article

  • TvTuner as webcamera

    - by BarsMonster
    Hi, I have decent TVTuner which can capture both analog signal & HDMI. I am able to connect my camera and see output of it in realtime in VirtualDub. I want to be able to use it in Skype and other software which use webcams. The problem is that they only use first "videoinput" of my videodevice, but HDMI is 3rd, and there is no interface to switch (in Skype for example)... So could you suggest any "proxy" software which can take video from Tuner, and show as a webcam?

    Read the article

  • Ubuntu 12.04 taking too much time to boot

    - by adarshdinesh
    Ubuntu 12.04 is taking much time for booting, Here is the system kernel message while booting .It is showing that some anacron was killed ,why ? and how to fix the problem ? [ 2.241047] scsi6 : usb-storage 2-1.6:1.0 [ 2.241501] usbcore: registered new interface driver usb-storage [ 2.241895] USB Mass Storage support registered. [ 3.240670] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.241791] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.243083] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 12.568641] Adding 4037904k swap on /dev/sda3. Priority:-1 extents:1 across:4037904k [ 12.615014] udevd[462]: starting version 175 [ 12.651334] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 12.655283] [drm] Initialized drm 1.1.0 20060810 ................... [ 14.118369] init: alsa-restore main process (982) terminated with status 19 [ 14.252595] init: anacron main process (1033) killed by TERM signal [ 14.285763] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 14.285841] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.285925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.285991] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.615073] init: plymouth-stop pre-start process (1222) terminated with status 1 [ 16.447287] wlan0: authenticate with c0:8a:de:7c:60:e8 (try 1) [ 16.448858] wlan0: authenticated [ 16.453405] wlan0: associate with c0:8a:de:7c:60:e8 (try 1) [ 16.456392] wlan0: RX AssocResp from c0:8a:de:7c:60:e8 (capab=0x431 status=0 aid=2) [ 16.456398] wlan0: associated [ 16.457014] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 16.457017] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 16.457019] ieee80211 phy0: changing basic rates failed: -22 [ 16.457021] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 16.457226] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.654196] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 17.823565] ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 180/256 dur 1946/1504 [ 18.220865] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.881422] wlan0: no IPv6 routers present [ 68.228293] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 73.240133] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 76.574490] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 102.180006] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 103.100984] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 124.171624] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)

    Read the article

  • Need a PCIe desktop graphics card for dual-monitor

    - by Graham
    I have a mid-2008 workstation with two HD monitors supporting HDMI and DVI inputs. Since Ubuntu 11.10, I have experienced no end of trouble with my NVidia Quadro NVS 290 in TwinView dual-monitor output. Others have similar desktop TwinView woes. I want a new graphics card. Previously I asked for a graphics card recommendation and response was Nvidia Geforce GTS 450... but really I'm looking for someone who has actually got a working dual-monitor desktop to tell me what card they use so I can get something that is known to work. So please, people who have no-issues with their 64-bit Ubuntu 12.04 Unity 3D desktop spread across two HD-resolution external monitors (either DVI or HDMI connector), and who also run Google Chrome (which throws a spanner due to its own GPU compositing)... please let me know what graphics card you have so I can buy one. Gathering Options These seem to be the Nvidia cards featuring dual DVI. But they all seem to be gaming cards - what has dual-DVI, good support, but is not a massive gaming card? Nvidia GTS 450 (previously recommended) - 2x DVI Nvidia GTX 550 Ti (used by System76) - 2x DVI Nvidia GT 430 (used by System76) - 1xDVI, 1xHDMI Nvidia GT 640 (found on NVidia site) - 1xDVI, 1xHDMI (also GT 620, GT 630) Has anyone had a good desktop dual-monitor Unity 3D experience with ATI cards?

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >