Search Results

Search found 26977 results on 1080 pages for 'input device'.

Page 14/1080 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Create Device Reccieve SMS Parse To Text ( SMS Gateway )

    - by Chris Okyen
    I want to use a server as a device to run a script to parse a SMS text in the following way. I. The person types in a specific and special cell phone number (Similar to Facebook’s 32556 number used to post on your wall) II. The user types a text message. III. The user sends the text message. IV. The message is sent to some kind of Device (the server) or SMS Gateway and receives it. V. The thing described above that the message is sent to then parse the test message. I understand that these three question will mix Programming and Server Stuff and could reside here or at DBA.SE How would I make such a cell phone number (described in step I) that would be sent to the Device? How do I create the device that then would receive it? Finally, how do I Parse the text message?

    Read the article

  • Device or resource busy errors when setting up a RAID array

    - by JGazlyVFX
    I'm trying to create a Raid array and these are the errors I keep getting. I have repartitioned the drives several times. root@BitchStewie:/dev# sudo mdadm --verbose --create /dev/md1 --chunk=64 --level=0 --raid-devices=12 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 /dev/sdh1 /dev/sdi1 /dev/sdj1 /dev/sdk1 /dev/sdl1 /dev/sdm1 mdadm: super1.x cannot open /dev/sdb1: Device or resource busy mdadm: ddf: Cannot use /dev/sdb1: Device or resource busy mdadm: Cannot use /dev/sdb1: It is busy mdadm: device /dev/sdb1 not suitable for any style of array

    Read the article

  • ubuntu 10.10 does not recognize usb sticks and drives

    - by Peter
    When connecting any usb stick to my thinkpad ubuntu 10.10 does not recognize them. I don't see anything on the desktop. the output of "dmesg | tail -n10" gives me: [ 1965.696388] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1965.884537] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.072503] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.260349] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.506227] usb 1-1: new high speed USB device using ehci_hcd and address 9 [ 1966.572375] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.760379] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.948358] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1967.136335] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1967.325423] hub 1-0:1.0: unable to enumerate USB device on port 1 When connecting my usb scanner to the same port: [ 2008.480135] usb 1-1: new high speed USB device using ehci_hcd and address 65 [ 2008.548389] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2008.736786] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2008.924379] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.112348] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.300443] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.488536] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.732180] usb 1-1: new high speed USB device using ehci_hcd and address 71 [ 2014.796299] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2018.000128] usb 2-1: new full speed USB device using uhci_hcd and address 3 And ubuntu 10.10 recognizes that scanner. So: What can i do to see my usb stick? BTW: on my other Thinkpad running fedora 14 it works perfectly... Cheers -Peter

    Read the article

  • How to disable hiddev96 in linux (or tell it to ignore a specific device)

    - by Miky D
    I'm having problems with a CentOS 5.0 system when using a certain USB device. The problem is that the device advertises itself as a HID device and linux is happy to try to provide support for it: In /ver/log/messages I see a line that reads: hiddev96: USB HID 1.11 Device [KXX USB PRO] on usb-0000:00:1d.0-1 My question comes down to: Is there a way to tell linux to not use hiddev96 for that device in particular? If yes, how? If not, what are my options - can I turn hiddev96 off completely? UPDATE I should probably have been a bit more specific about what is going on. The machine is running Centos 5.0, and on top of it I'm running VMWare workstation with Windows XP - which is where the USB device is actually supposed to operate. All works fine for other USB devices (i.e. VMWare successfully connects the USB device to the guest OS and the OS can use it, but for this particular device VMWare connects it to the guest OS, but the OS can't read/write to it) Every attempt locks up the application that is trying to communicate with the device. I've reason to believe that it is because the device is a HID device and there's some contention between the Linux host and the Windows guest OS in accessing the device. Below is the output from modprobe -l|grep -i hid as requested by @Karolis: # modprobe -l | grep -i hid /lib/modules/2.6.18-53.1.14.el5/kernel/net/bluetooth/hidp/hidp.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetservo.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetkit.ko And here is the output of lsmod # lsmod Module Size Used by udf 76997 1 vboxdrv 65696 0 autofs4 24517 2 hidp 23105 2 rfcomm 42457 0 l2cap 29633 10 hidp,rfcomm tun 14657 0 vmnet 49980 16 vmblock 20512 3 vmmon 945236 0 sunrpc 144253 1 cpufreq_ondemand 10573 1 video 19269 0 sbs 18533 0 backlight 10049 0 i2c_ec 9025 1 sbs button 10705 0 battery 13637 0 asus_acpi 19289 0 ac 9157 0 ipv6 251393 27 lp 15849 0 snd_hda_intel 24025 2 snd_hda_codec 202689 1 snd_hda_intel snd_seq_dummy 7877 0 snd_seq_oss 32577 0 nvidia 7824032 31 snd_seq_midi_event 11073 1 snd_seq_oss snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42945 0 snd_mixer_oss 19009 1 snd_pcm_oss snd_pcm 72133 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss joydev 13313 0 sg 36061 0 parport_pc 29157 1 snd_timer 24645 2 snd_seq,snd_pcm snd 52421 13 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer ndiswrapper 170384 0 parport 37513 2 lp,parport_pc hci_usb 20317 2 ide_cd 40033 1 tg3 104389 0 i2c_i801 11469 0 bluetooth 53925 8 hidp,rfcomm,l2cap,hci_usb soundcore 11553 1 snd cdrom 36705 1 ide_cd serio_raw 10693 0 snd_page_alloc 14281 2 snd_hda_intel,snd_pcm i2c_core 23745 3 i2c_ec,nvidia,i2c_i801 pcspkr 7105 0 dm_snapshot 20709 0 dm_zero 6209 0 dm_mirror 28741 0 dm_mod 58201 8 dm_snapshot,dm_zero,dm_mirror ahci 23621 4 libata 115833 1 ahci sd_mod 24897 5 scsi_mod 132685 3 sg,libata,sd_mod ext3 123337 3 jbd 56553 1 ext3 ehci_hcd 32973 0 ohci_hcd 23261 0 uhci_hcd 25421 0

    Read the article

  • Files backup utility with incremental backups that would keep backup device clean

    - by Wojtek
    I've tested a few of backup utilities and still haven't found one that would satisfy me. Almost every one of them has two options: - full backup - not an option to use frequently - incremental backup - seems right, but there's one thing about it: Incremental backup builds on a base of a full backup, backing up only those files, that were created/changed. The thing is, that after some time you've got a lot of unwanted files from the old backups bloating your backup device. Also, if you'd accidentally delete your full (first) backup file, then the differential backups would be corrupted (you wouldn't be able to restore them). The thing I'm looking for is a program, that would backup files simply by copying them. It would check the backup device whether it contains the file (unchanged): - if yes, it should proceed to the next file (we've got current version backed up) - if no, it would copy the file to the backup device - if the device contains a file that is no longer on our disk, the program would delete it from the backup device Is there any such utility, that would work this way? If not, do you have any hints on how to backup fairly big amounts of data (around 20gb) quite frequently with incremental backups and not be exposed to those unwanted effects of backup size puffing up?

    Read the article

  • Extra fire simulation on iPad device

    - by Nezam
    I have with me an iOS app for iPad which creates a few fire simulations over a png.Well,its working well exactly how we wanted it but when we are testing it on a device,we get an extra fire simulation.Heres the screen: iPad Simulator: This is how it should display (iPad Simulation) iPad Device: This is how its displaying (iPad Device) M ready to share whichever portion of my code which gets me to my solution once someone gets hit here.Thanks in advance

    Read the article

  • `power/persist` file not found in USB device sysfs directory

    - by intuited
    The file /usr/share/doc/linux-doc/usb/persist.txt.gz mentions that the USB-persist capability can be enabled for a given USB device by writing 1 to the file persist in that device's directory in /sys/bus/usb/devices/$device/power. This is said — if I understood correctly — to allow mountings of volumes on the drive to persist across power loss during suspend. However, I've discovered that the device I'd like to enable this facility for — a USB hard drive — does not have such a file in its corresponding directory, and that attempts to create it are rebuffed. Is there perhaps a kernel module that needs to be loaded for this to work? Do I need to build a custom kernel? I'm running ubuntu 10.10.

    Read the article

  • ALSA samples capture: cannot open device

    - by Randagio
    I'm quite new to Linux (Lubuntu 12.04 for sake of precision) and ALSA programming at all. I'm trying to write a C program to capture audio from internal PC microphone for processing it. So as first step I google a bit and I found this article for capturing audio samples A tutorial on using the ALSA Audio API but when I compile it and execute it with: ./capture "default" or ./capture "hw:0,0" and all the possible variants on theme it always raises the error: cannot open device hw:0,0 (no such file or directory). So the issue is: what is the name of the mic audio device to pass as parameter to record the audio from mic ? The mic is working ok because the Sound Recorder program records sounds perfectly and I can playback them. The output of the aplay -l is the following : **** List of PLAYBACK Hardware Devices **** card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 4: Intel ICH - IEC958 [Intel 82801DB-ICH4 - IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 and this is the amixer output (cut) Simple mixer control 'Master',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Master Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 4 [13%] [-40.50dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [12.00dB] [on] Front Right: Playback 31 [100%] [12.00dB] [on] Simple mixer control 'CD',0 Capabilities: pvolume pswitch cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 22 [71%] [-1.50dB] [on] Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Stereo Mic',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] so for aplay it seems I have no recording device, but for amixer I've got the mic, a mic boost and mic stereo as well with all those gorgeous stuffs on their place !!. If so, how could my Sound Recorder record the audio without any problem at all ?!?! For sure I'm giving the wrong device name to the command line for capturing audio but I'm loosing the hope for finding the correct one ! Please help....before I tear my hair out !!!

    Read the article

  • Force usb to use same device id, instead of new one

    - by m s kumar
    I am having some trouble in automating the task. I am testing some android based mobiles in linux machine. The automation script uses the device id under "/dev/bus/usb/001/"053" it will be always under bus 001 only.. But the dev is will be random like if i insert one mobile then the dev id will be 053, if remove and insert it again then the dev id will be 054.. The problem is, when some tests runs on the device and if device gets rebooted then new dev id is showing for the rebooted one and my scripts failing due to new dev id.. Is there any way to force usb devices to use same dev id instead of new one. So that there will be no issues to my tests even after device reboots. Thanks in advance.

    Read the article

  • manage 2 wireless device

    - by yi.tang.uni
    I erased Windows 7 and installed Ubuntu 12.04 on my Dell Latitude E4200. I an very happy with my choice but with little pity. I cannot use the wireless service in my university as the build-in device works unstable. I bought a USB wireless device, which solve the problem. However, the build-in device keep to sent me message about unable to connect, which waste laptop's cup & battery. The phsical bottom to turn off wireless affect both devices. So the question is: "How can I manually shut down wireless device?" There is another interest comes to my mind: "Does 2 wireless improve the overall internet usage if I run a high-internet-consuming program like BT ?" Thank for your time and energy.

    Read the article

  • How can I select an audio output device in directshow

    - by Vibhore Tanwer
    I was wondering how I can select the output device for audio in directshow. I am able to get available audio output devices in directshow. But how can I make one of these to be audio output device. Its always going for the default audio device. I want to be able to output audio on my choice of device. I have been struggling through google but couldn't find anything useful. All I could get was this link but it doesn't really solve my problem. Any help will be really helpful for me.

    Read the article

  • Google I/O 2012 - Fast UIs for the Cross-Device Web

    Google I/O 2012 - Fast UIs for the Cross-Device Web Boris Smus One of the great features of the modern web is that sites work on any device with a browser. This session will focus on creating UIs for the cross-device web. We will cover building web sites that support multiple device form factors (responsive and non-responsive approaches), discuss single page sites and some of the layout features in modern mobile browsers, and do a deep dive into multi-touch input on the web. Finally, we'll show some of the awesome new mobile debugging tools in Chrome and Chrome for Android. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 105 3 ratings Time: 49:31 More in Science & Technology

    Read the article

  • Unable to enumerate USB device on port 2 when connecting Android phone

    - by ProfessionalAmateur
    I'm running Ubuntu 11.10 (64-bit) as a VirtualBox guest on a Win7 64-bit host. When I plug in my Android Epic4g (Galaxy S) both the host and guest see the device properly, however lsusb does not. When I run dmesg I get the following: [ 361.664219] usb 1-2: new full speed USB device number 79 using ohci_hcd [ 362.428798] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 363.313782] hub 1-0:1.0: unable to enumerate USB device on port 2 I get the same type of dmesg message with the USB 2.0 (ECHI) Controller enabled and disabled for the guest OS. I'm stuck with this one, can anyone help?

    Read the article

  • error: no device connected

    - by Prabath Swarna
    I did a fresh install of 12.04 and it went fine, worked on it for several days, but one day the browser crashed and i reset the machine, after that I get this error when i boot; error: no device connected error: no device connected error: no device connected error: no device connected This comes after the BIOS confirmation, and it stays for about 30 seconds, then the grub menu comes and when I selected the default the screen becomes purple and stays like that for a whole Minuit. I thought maybe that is because I have 500GB HDD so i ran the boot-repair, It did nothing at all. I'm sure I did the boot-repair thing right, sorry I forgot the paste URL. If i reinstalled will this error persist.

    Read the article

  • Creating a WARP device in managed DirectX

    - by arex
    I have a very old graphic card that only supports shader model 2, but I need shader model 3 or up for the app I am developing. I tried to use a reference device but it seems to run very slowly, then I found some samples in C++ that allows me to change to a WARP device and the performance is good. I am using C# and I don't know how to create such type of device. So the question is: how do I create a WARP device in C#? Thanks in advance.

    Read the article

  • ubuntu 10.04: wlan0 No such device

    - by AodhanOL
    I am using a Dell xps l702x and I am using ubuntu 10.04 because I need to use f77 (don't ask) and I wasn't able to get it working on later versions of ubuntu. I cannot use the wifi at all. I have tried to fix it and have had limited success (changed the output from rfkill list all from Hard blocked: yes, to hard blocked: no). Here is the output from rfkill list all aodhan@aodhan-laptop:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: dell-bluetooth: Bluetooth Soft blocked: no Hard blocked: no Here is the output from iwconfig: aodhan@aodhan-laptop:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. pan0 no wireless extensions. And here is the output from ifconfig -a: aodhan@aodhan-laptop:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 5c:f9:dd:3d:f2:f7 inet addr:192.168.1.17 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::5ef9:ddff:fe3d:f2f7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3417 errors:0 dropped:0 overruns:0 frame:0 TX packets:2894 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3317567 (3.3 MB) TX bytes:505049 (505.0 KB) Interrupt:30 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) pan0 Link encap:Ethernet HWaddr 7e:7e:e8:39:70:af BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) And finally, the output from lspci: 00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c4b (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 1246 (rev a1) 03:00.0 Network controller: Intel Corporation Device 008a (rev 34) 04:00.0 USB Controller: NEC Corporation Device 0194 (rev 04) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Please help me! Thank you in advance. Edit: Further info - this is a dual install with a windows 7 system as the other option. However, I can't access that until tomorrow (I won't have access to the windows 7 disc until then, and grub isn't letting me load it). Therefore, I can't be sure whether it still works on that or not. It used to, though.

    Read the article

  • ASP.NET MVC check form input is valid on submit

    - by Gavin
    Hi all, I have a form that when submitted shows a busy animation and disables the submit button. Anyone know how to query Microsoft's Sys.Mvc.FormValidation to see if the form passed it's test so I can prevent the busy animation showing if the form hasn't actually been submitted? Or even some other work-around? At present my client side javascript looks like this: $('form').submit(function() { $('input[type=submit]', this).attr('disabled', 'disabled'); ShowBusy(); }); Cheers, Gavin

    Read the article

  • Matlab: Print text in input field

    - by Adam Doyle
    Using Matlab, I have this code: value = input('>> Enter a value: '); and basically, I want a "default" value to the right of the colon (sortof like this) >> Enter a value: 12 where "12" is editable such that the user could [backspace] [backspace] and change the value to, say, "20" or something. Is there any (easy) way to do this? Thanks!

    Read the article

  • input value in jquery fancybox

    - by Frankie-T
    Like asked here I got the problem, that I cannot read the value of an input type="text" field after writing something into it. The event is fired correctly, and with other inputs outside the fancybox it works great.

    Read the article

  • Haskell Input Return Tuple

    - by peterwkc
    Hello to all, i wonder can a IO() function return tuple because i would like to get these out of this function as input for another function. investinput :: IO()->([Char], Int) investinput = do putStrLn "Enter Username : " username <- getLine putStrLn "Enter Invest Amount : " tempamount <- getLIne let amount = show tempamount return (username, amount) Please help. Thanks.

    Read the article

  • File input validation

    - by Emanuil
    You have a web page with a form that has an input field of type file. You have another web page that expects the data from the first page. In the second page you need to check whether a file has been sent. How do you do that? I've been using the following statement but I'm not sure about it: $_FILES["file"]["tmp_name"] == ""

    Read the article

  • Dynamically resize input

    - by Matt
    Hey all, I was just wondering how do you dynamically resize an input as you type in it?? I'd like to use jQuery if possible & I would rather it be a small script than a bulky plugin. Please let me know, Matt Mueller

    Read the article

  • accept attribute in input file is not working

    - by subash
    hi i came across a browse file dialog control tag in htnl .and the tag was <input id="myfile" name="myfile" type="file" accept="application/pdf"/> but the accept attribute doesnt seems to have any effect .iam using internetexplorer 8 browser does it have any thing to do with the accept atribute

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >