Search Results

Search found 908 results on 37 pages for 'jhm 67'.

Page 14/37 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21 | Next Page >

Debian date jumping, causing complete lockup

- by artfulrobot

I have a Debian Squeeze VM that has suddenly chosen to jump it's date forwards just over a month, which seems to confuse it no end and cause it to require a hard reset (yikes!). There is nothing unusual in the logs, except that the datestamp suddenly jumps (today back to 2005). It's happened three times, so I don't think it's to do with the leap second issue as the last one of those was in July. When it happened once I spent ages checking stuff but could not find anything, decided to forget it. But three times is becoming an issue on a production server. Edits providing information requested in comments (thanks!): I do not have control over the hypervisor, it is a hired VM. # cat /sys/devices/system/clocksource/clocksource0/current_clocksource kvm-clock # ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== +grendel.exizten 130.149.17.8 2 u 29 64 77 14.811 1.778 1.744 *panoramix.linoc 193.67.79.202 2 u 32 64 77 19.729 -0.419 1.691 +robert.elnounch 213.251.128.249 2 u 27 64 77 17.762 0.600 1.722 -janetzki.eu 83.169.43.165 3 u 31 64 77 27.214 3.575 1.638

Read the article
FFMPEG Segfault Solutions

- by Brentley_11

I'm trying to convert a bunch of movies into h.264 mp4's using FFMPEG. These movies are sourced from various portable camcorders such as the Flip Mino HD and the Kodak ZI8. One issue I'm having with video from the ZI8 is it seems to be causing FFMPEG to segfault. Here is my command: ffmpeg -i 'XmasSailor720p60fps.MOV' -threads 2 -acodec libfaac -ab 96kb -vcodec libx264 -vpre hq -b 500kb -s 484x272 XmasSailor.mp4 Here is the output: FFmpeg version SVN-r20668, Copyright (c) 2000-2009 Fabrice Bellard, et al. built on Dec 2 2009 18:37:34 with gcc 4.2.4 (Ubuntu 4.2.4-1ubuntu4) configuration: --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared libavutil 50. 5. 1 / 50. 5. 1 libavcodec 52.42. 0 / 52.42. 0 libavformat 52.39. 2 / 52.39. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 2 / 0. 7. 2 libpostproc 51. 2. 0 / 51. 2. 0 Seems stream 0 codec frame rate differs from container frame rate: 59.94 (60000/1001) -> 29.97 (30000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'XmasSailor720p60fps.MOV': Duration: 00:00:05.37, start: 0.000000, bitrate: 12021 kb/s Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 11994 kb/s, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 128 kb/s Metadata major_brand : qt minor_version : 0 compatible_brands: qt comment : KODAK Zi8 Pocket Video Camera comment-eng : KODAK Zi8 Pocket Video Camera [libx264 @ 0x99e1020]using SAR=1/1 [libx264 @ 0x99e1020]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64 [libx264 @ 0x99e1020]profile High, level 2.1 Output #0, mp4, to 'XmasSailor.mp4': Stream #0.0(eng): Video: libx264, yuv420p, 484x272 [PAR 1:1 DAR 121:68], q=10-51, 500 kb/s, 30k tbn, 29.97 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 96 kb/s Metadata comment : Encoded with the Statusfirm Video Transcoder Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 frame= 20 fps= 0 q=13797729.0 size= 0kB time=0.66 bitrate= 0.6kbits/s frame= 39 fps= 37 q=13797729.0 size= 0kB time=1.30 bitrate= 0.3kbits/s frame= 48 fps= 30 q=33.0 size= 11kB time=0.10 bitrate= 903.0kbits/s frame= 58 fps= 27 q=31.0 size= 22kB time=0.43 bitrate= 421.0kbits/s frame= 67 fps= 25 q=29.0 size= 41kB time=0.73 bitrate= 462.6kbits/s frame= 75 fps= 23 q=29.0 size= 59kB time=1.00 bitrate= 486.7kbits/s frame= 83 fps= 22 q=29.0 size= 81kB time=1.27 bitrate= 521.9kbits/s frame= 90 fps= 21 q=29.0 size= 97kB time=1.50 bitrate= 530.1kbits/s frame= 98 fps= 20 q=29.0 size= 114kB time=1.77 bitrate= 526.9kbits/s frame= 106 fps= 20 q=29.0 size= 134kB time=2.04 bitrate= 537.7kbits/s frame= 114 fps= 19 q=29.0 size= 150kB time=2.30 bitrate= 533.7kbits/s frame= 122 fps= 19 q=29.0 size= 172kB time=2.57 bitrate= 547.8kbits/s frame= 130 fps= 19 q=29.0 size= 193kB time=2.84 bitrate= 557.5kbits/s frame= 136 fps= 18 q=29.0 size= 211kB time=3.04 bitrate= 570.0kbits/s frame= 144 fps= 18 q=29.0 size= 242kB time=3.30 bitrate= 599.5kbits/s frame= 152 fps= 17 q=30.0 size= 261kB time=3.57 bitrate= 598.6kbits/s frame= 157 fps= 15 q=-1.0 Lsize= 368kB time=5.21 bitrate= 579.3kbits/s video:302kB audio:61kB global headers:0kB muxing overhead 1.416371% [libx264 @ 0x99e1020]frame I:1 Avg QP:27.22 size: 8720 [libx264 @ 0x99e1020]frame P:48 Avg QP:25.15 size: 3759 [libx264 @ 0x99e1020]frame B:108 Avg QP:30.10 size: 1105 [libx264 @ 0x99e1020]consecutive B-frames: 0.6% 11.5% 28.8% 59.0% [libx264 @ 0x99e1020]mb I I16..4: 28.5% 47.6% 23.9% [libx264 @ 0x99e1020]mb P I16..4: 0.8% 1.3% 0.5% P16..4: 50.6% 17.7% 13.1% 0.0% 0.0% skip:15.9% [libx264 @ 0x99e1020]mb B I16..4: 0.2% 0.3% 0.1% B16..8: 44.0% 1.2% 2.6% direct: 5.1% skip:46.5% L0:45.5% L1:51.0% BI: 3.5% [libx264 @ 0x99e1020]final ratefactor: 23.51 [libx264 @ 0x99e1020]8x8 transform intra:49.9% inter:67.9% [libx264 @ 0x99e1020]direct mvs spatial:98.1% temporal:1.9% [libx264 @ 0x99e1020]coded y,uvDC,uvAC intra: 54.7% 76.1% 41.4% inter: 17.1% 24.4% 7.8% [libx264 @ 0x99e1020]i16 v,h,dc,p: 18% 52% 5% 25% [libx264 @ 0x99e1020]i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 22% 9% 7% 10% 10% 9% 8% 13% [libx264 @ 0x99e1020]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 13% 18% 8% 8% 10% 13% 10% 9% 12% [libx264 @ 0x99e1020]Weighted P-Frames: Y:10.4% [libx264 @ 0x99e1020]ref P L0: 60.2% 15.3% 11.0% 7.6% 5.2% 0.7% [libx264 @ 0x99e1020]ref B L0: 72.6% 15.6% 11.8% [libx264 @ 0x99e1020]kb/s:471.17 Segmentation fault I'm wondering if anyone else has ran into similar issues. I wasn't able to find anything helpful via Google. Another question I have is if anyone knows of a company that offers paid support for FFMPEG. Thank you for your time.

Read the article
Bridging LXC containers to host eth0 so they can have a public IP

- by Vianney Stroebel

UPDATE: I found the solution there: http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge#No_traffic_gets_trough_.28except_ARP_and_STP.29 # cd /proc/sys/net/bridge # ls bridge-nf-call-arptables bridge-nf-call-iptables bridge-nf-call-ip6tables bridge-nf-filter-vlan-tagged # for f in bridge-nf-*; do echo 0 $f; done But I'd like to have expert opinions on this: is it safe to disable all bridge-nf-*? What are they here for? END OF UPDATE I need to bridge LXC containers to the physical interface (eth0) of my host, reading numerous tutorials, documents and blog posts on the subject. I need the containers to have their own public IP (which I've previously done KVM/libvirt). After two days of searching and trying, I still can't make it work with LXC containers. The host runs a freshly installed Ubuntu Server Quantal (12.10) with only libvirt (which I'm not using here) and lxc installed. I created the containers with : lxc-create -t ubuntu -n mycontainer So they also run Ubuntu 12.10. Content of /var/lib/lxc/mycontainer/config is: lxc.utsname = mycontainer lxc.mount = /var/lib/lxc/test/fstab lxc.rootfs = /var/lib/lxc/test/rootfs lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethmycontainer lxc.network.ipv4 = 179.43.46.233 lxc.network.hwaddr= 02:00:00:86:5b:11 lxc.devttydir = lxc lxc.tty = 4 lxc.pts = 1024 lxc.arch = amd64 lxc.cap.drop = sys_module mac_admin mac_override lxc.pivotdir = lxc_putold # uncomment the next line to run the container unconfined: #lxc.aa_profile = unconfined lxc.cgroup.devices.deny = a # Allow any mknod (but not using the node) lxc.cgroup.devices.allow = c *:* m lxc.cgroup.devices.allow = b *:* m # /dev/null and zero lxc.cgroup.devices.allow = c 1:3 rwm lxc.cgroup.devices.allow = c 1:5 rwm # consoles lxc.cgroup.devices.allow = c 5:1 rwm lxc.cgroup.devices.allow = c 5:0 rwm #lxc.cgroup.devices.allow = c 4:0 rwm #lxc.cgroup.devices.allow = c 4:1 rwm # /dev/{,u}random lxc.cgroup.devices.allow = c 1:9 rwm lxc.cgroup.devices.allow = c 1:8 rwm lxc.cgroup.devices.allow = c 136:* rwm lxc.cgroup.devices.allow = c 5:2 rwm # rtc lxc.cgroup.devices.allow = c 254:0 rwm #fuse lxc.cgroup.devices.allow = c 10:229 rwm #tun lxc.cgroup.devices.allow = c 10:200 rwm #full lxc.cgroup.devices.allow = c 1:7 rwm #hpet lxc.cgroup.devices.allow = c 10:228 rwm #kvm lxc.cgroup.devices.allow = c 10:232 rwm Then I changed my host /etc/network/interfaces to: auto lo iface lo inet loopback auto br0 iface br0 inet static bridge_ports eth0 bridge_fd 0 address 92.281.86.226 netmask 255.255.255.0 network 92.281.86.0 broadcast 92.281.86.255 gateway 92.281.86.254 dns-nameservers 213.186.33.99 dns-search ovh.net When I try command line configuration ("brctl addif", "ifconfig eth0", etc.) my remote host becomes inaccessible and I have to hard reboot it. I changed the content of /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces to: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 179.43.46.233 netmask 255.255.255.255 broadcast 178.33.40.233 gateway 92.281.86.254 It takes several minutes for mycontainer to start (lxc-start -n mycontainer). I tried replacing gateway 92.281.86.254 by : post-up route add 92.281.86.254 dev eth0 post-up route add default gw 92.281.86.254 post-down route del 92.281.86.254 dev eth0 post-down route del default gw 92.281.86.254 My container then starts instantly. But whatever configuration I set in /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces, I cannot ping from mycontainer to any IP (including the host's) : ubuntu@mycontainer:~$ ping 92.281.86.226 PING 92.281.86.226 (92.281.86.226) 56(84) bytes of data. ^C --- 92.281.86.226 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5031ms And my host cannot ping the container: root@host:~# ping 179.43.46.233 PING 179.43.46.233 (179.43.46.233) 56(84) bytes of data. ^C --- 179.43.46.233 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms My container's ifconfig: ubuntu@mycontainer:~$ ifconfig eth0 Link encap:Ethernet HWaddr 02:00:00:86:5b:11 inet addr:179.43.46.233 Bcast:255.255.255.255 Mask:0.0.0.0 inet6 addr: fe80::ff:fe79:5a31/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:6 overruns:0 frame:0 TX packets:54 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4070 (4.0 KB) TX bytes:4168 (4.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2496 (2.4 KB) TX bytes:2496 (2.4 KB) My host's ifconfig: root@host:~# ifconfig br0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b inet addr:92.281.86.226 Bcast:91.121.67.255 Mask:255.255.255.0 inet6 addr: fe80::4e72:b9ff:fe43:652b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1453 errors:0 dropped:18 overruns:0 frame:0 TX packets:1630 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145125 (145.1 KB) TX bytes:299943 (299.9 KB) eth0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3178 errors:0 dropped:0 overruns:0 frame:0 TX packets:1637 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:298263 (298.2 KB) TX bytes:309167 (309.1 KB) Interrupt:20 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:300 (300.0 B) TX bytes:300 (300.0 B) vethtest Link encap:Ethernet HWaddr fe:0d:7f:3e:70:88 inet6 addr: fe80::fc0d:7fff:fe3e:7088/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4168 (4.1 KB) TX bytes:4250 (4.2 KB) virbr0 Link encap:Ethernet HWaddr de:49:c5:66:cf:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) I have disabled lxcbr0 (USE_LXC_BRIDGE="false" in /etc/default/lxc). root@host:~# brctl show bridge name bridge id STP enabled interfaces br0 8000.4c72b943652b no eth0 vethtest I have configured the IP 179.43.46.233 to point to 02:00:00:86:5b:11 in my hosting provider (OVH) config panel. (The IPs in this post are not the real ones.) Thanks for reading this long question! :-) Vianney

Read the article
Public IP shows strange characters and Facebook registers logged-in session to a different location

- by Stuart Kershaw

I'm encountering some IP strangeness today and hoping to find an explanation. In short, I'm based in Seattle, WA with my ISP being Comcast. While browsing Facebook's account settings, I noticed that my active session was located to Mount Laurel, NJ. At that point I ran a search in Google for 'my public IP', which returned an interesting result: a string of characters in the following format: 2601:8:b000:xxx:xxxx:xxxx:xxxx:xxxx Normally, a search for my IP returns something like: 67.xxx.xx.xxx A phone call to Comcast got me nowhere, but using Comcast's phone-menu debugging tools, I was able to send a 'refresh signal' to my modem. After that, the search for 'my public IP' yielded the expected result... for about 5 minutes, and then it returned to the new string of characters. Does anyone know of an explanation for this?

Read the article
Windows global shortcut hijacked by Opera

- by Balint

I have Chrome 37 installed as my main browser. Recently I needed to test a design in a new, Chromium based Opera version 21.0.1432.67. This later one hijacked my global shortcuts somehow, so if I press Ctrl+Shift+N to start a new session for testing, even if Chrome is running, and it is the active window, the shortcut starts a new Opera tab - even if the program is not running. It is highly annoying. Even if I uninstall Opera, I'm unable to use the aforementioned shortcut, because it will not work at all. Any hints on how to restore the original shortcut?

Read the article
TIME_WAIT in netstat of Apache processes

- by Howard

What are the meaning of the TIME_WAIT when using netstat of my web server process? I am sure the web server is not over loaded. tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 15655/apache2 tcp 0 0 x.x.x.x:80 123.125.66.35:19667 SYN_RECV - tcp 0 0 x.x.x.x:80 113.138.59.140:12186 TIME_WAIT - tcp 0 0 x.x.x.x:80 66.249.67.121:59493 ESTABLISHED 23702/apache2 tcp 0 0 x.x.x.x:80 69.28.51.206:40652 TIME_WAIT - tcp 0 0 x.x.x.x:80 221.126.149.99:51877 TIME_WAIT - tcp 0 0 x.x.x.x:80 221.126.149.99:51872 TIME_WAIT - tcp 0 0 x.x.x.x:80 123.125.66.19:13084 TIME_WAIT -

Read the article
Can I ping via an arbitrary interface of a DD-WRT system?

- by bytebuster

There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

Read the article
DNS Replication issue

- by BillN

We host the DNS for our domain. Two weeks ago, the developer requested that we setup a new zone 'dev.ourdomain.com' and place two host records in it my.dev.ourdomain.com and admin.dev.ourdomain.com. We added the zone to our DNS and added A records for the host. Now a week later, some DNS servers like google (8.8.8.8) and gtei (4.2.2.2) will resolve the hosts, but others like OpenDNS (208.67.222.222 ) and ATT Uverse (68.94.156.1) cannot resolve it. Any Ideas?

Read the article
Problem connecting to MySQL with zend

- by wheresrhys

I've set up a virtual host on my local machine (windows xp with xampp installed), have installed zend there and am now trying to connect to the MySQLdatabase. I get the following error message: Message: SQLSTATE[HY000] [2003] Can't connect to MySQL server on ''myhost.com'' (10060) All the tips I've found via google haven't helped. I use kaspersky antivirus and have added port 3306 to the allowed list for MySQL and Apache. I've also pinged myhost.com:3306 and get a response (with ip address 67.63.50.51), though localhost:3306 and 127.0.0.1:3306 aren't found. I've checked that other apps can still access MySQL if the virtual host is pointed at them instead and my non zend apps do work. I guess I have to do something further to the port, or maybe force the app to use a different port, but am not sure how to do either. Any help appreciated.

Read the article
Xmodmap configuration

- by Krishna S

On my Debian Linux machine Ctrl+Alt+F1 is bound to a virtual terminal. I can see the corresponding entry by running xmodmap -pke keycode 67 = F1 XF86_Switch_VT_1 F1 XF86_Switch_VT_1 Per this thread, which I might add is consistent with what I've read elsewhere, the columns on the right hand side of = correspond to key, Shift+key, AltGr+key and Shift+AltGr+key. Given that, I don't understand how the keycode mapping for F1 (above) works for Ctrl+Alt+F1. It seems it should really be either Shift+F1 or Shift+AltGr+F1? Here's the output of xmodmap -pm on my machine: shift Shift_L (0x32), Shift_R (0x3e) lock Caps_Lock (0x25) control Control_L (0x42), Control_R (0x69) mod1 Alt_L (0x40), Alt_R (0x6c), Meta_L (0xcd) mod2 Num_Lock (0x4d) mod3 mod4 Super_L (0x85), Super_R (0x86), Super_L (0xce), Hyper_L (0xcf) mod5 ISO_Level3_Shift (0x5c), Mode_switch (0xcb) Can anybody explain it?

Read the article
What is normal SCSI error handling process (scsi_eh_3) CPU time usage?

- by Kris Jordan

Last week I got setup with a new dedicated server that is running 4x SCSI drives in RAID 10 on CentOS. The machine is pretty lightly loaded at the moment and has been running for 8 days. The process 'scsi_eh_3' has a CPU time of 13:09.67 in top. This is 3x the next closest CPU time of 4:03.93 for mysqld. Is it normal for the scsi error handling process to use this much CPU time? (Seems like it goes to 0.3% usage ever 5 seconds.) Could this be an indicator that one or more of the drives is having issues?

Read the article
Want to SASL/TLS authentication

- by Naval

I want to send mail from remote client from my server(centos 5 and 64 bit) for this i need to sasl auth but i have no idea about it what changes i have to make in my server and client here I want to make things more clear my server's hostname/Ip is = test02.s80.in/176.67.172.209 now i want to authenticat remote client vps2.smail.info and vps1.smail.info to deliver mail .. so plz help me if any systematic way to do sasl/tls authentication for these clients... i am using DNS load-balancing(round-robin) mx record lookup technique for load balancing..

Read the article
How to debug high memory usage by registry?

- by bkr

I have a windows 2008 r2 server running ADFS2 and some web apps that is having issues with low memory. Digging around I found that the 5.5 GB were being used under Kernel Memory (paged). Further digging with Poolmon, I discovered that the majority of that (5GB+) was being used by CM - configuration manager. Also known as the registry. I'm really now sure how to tell why the registry is using so much memory however, or how to release it? Looking at the physical registry files they don't appear that large. EDIT #1 Using the powershell script @ http://jdhitsolutions.com/blog/2011/05/get-registry-size-and-age/ confirms what I saw looking at the physical registry files, that they're relatively small Computername : (removed) Status : OK CurrentSize : 67 MaximumSize : 2048 FreeSize : 1981 PercentFree : 96.728515625 Created : 4/1/2011 11:38:02 AM Age : 454.23:41:28.2540682

Read the article
OpenVPN Configuration - Windows 7 client & debian server

- by Guillaume

I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

Read the article
Route eth0 to internet traffic and eth1 to local traffic

- by Romain Caire

How can I route all my internet traffic on eth0 (everything except 192.168.1.0/24) and route my local traffic through eth1 (192.168.1.0)? Here is my attempt : # Flush ALL THE THINGS. ip route flush table main # Restore the main table. I flushed it because OpenVPN does weird things to it. ip route add 127.0.0.0/8 via 127.0.0.1 dev lo ip route add 0.0.0.0/0 via 164.67.195.1 ip route add 192.168.1.0/24 via 192.168.1.1 ip route flush cache

Read the article
Ubuntu cannot access internet, LAN is fine

- by Kevin Southworth

I have an Ubuntu 8.04 LTS server that is directly connected to our Comcast Business Gateway modem and I have configured it with 1 of our 5 allotted Static IPs. My other machines on our LAN can connect to this server (via ssh, web, ping, etc.) but I cannot access this server from outside our network, and this machine cannot get out to the internet either (ping google.com fails with unknown host). Here is my /etc/networking/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.162.54.19 netmask 255.255.255.248 broadcast 173.162.54.23 gateway 173.162.54.22 and my /etc/resolv.conf: nameserver 68.87.77.130 nameserver 68.87.72.130 output from sudo route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 173.162.54.16 0.0.0.0 255.255.255.248 U 0 0 0 eth0 0.0.0.0 173.162.54.22 0.0.0.0 UG 100 0 0 eth0 I have a Windows 2008 machine with an almost identical Static IP, static DNS setup and it works correctly, can access it within the LAN and also from public internet, the Windows machine and the Ubuntu machine are both directly connected to the Comcast Business Gateway. I have tried rebooting Ubuntu, rebooting my Comcast modem, but nothing seems to make it work. I'm an Ubuntu noob, is there some other config I need to apply to make this work? UPDATE: Yes I am able to ping my default gateway 173.162.54.22 output of iptables --list -n: Chain INPUT (policy DROP) target prot opt source destination ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination ufw-before-forward all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-forward all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ufw-before-output all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-output all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-forward (1 references) target prot opt source destination LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK FORWARD]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-input (1 references) target prot opt source destination RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:137 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:138 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK INPUT]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-forward (1 references) target prot opt source destination ufw-user-forward all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 ctstate INVALID ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:67 dpt:68 ufw-not-local all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 224.0.0.0/4 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 224.0.0.0/4 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-output (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ufw-user-output all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-not-local (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type MULTICAST RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK NOT-TO-ME]: ' DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-forward (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0

Read the article
How do I update my servers' domain name for Reverse DNS?

- by Jeff

I'm updating my mail servers' rDNS and I think I have it all figured out except for one thing. When I installed my OS (Debian Etch), the installer asked me to enter the "domain name". Is the "domain name" updated by using the hostname command? If so, which config file(s) are updated when using the hostname command? If not, how do I change my servers' domain name? My current /etc/hosts: 127.0.0.1 localhost 67.228.178.164 mrspock.example-old.com mrspock My current /etc/hostname: mrspock $ hostname -f mrspock.example-old.com I need to update hostname -f to be mrspock.example-new.com.

Read the article
Problem connecting to MySQL with zend

- by wheresrhys

I've set up a virtual host on my local machine (windows xp with xampp installed), have installed zend there and am now trying to connect to the MySQLdatabase. I get the following error message: Message: SQLSTATE[HY000] [2003] Can't connect to MySQL server on ''myhost.com'' (10060) All the tips I've found via google haven't helped. I use kaspersky antivirus and have added port 3306 to the allowed list for MySQL and Apache. I've also pinged myhost.com:3306 and get a response (with ip address 67.63.50.51), though localhost:3306 and 127.0.0.1:3306 aren't found. I've checked that other apps can still access MySQL if the virtual host is pointed at them instead and my non zend apps do work. I guess I have to do something further to the port, or maybe force the app to use a different port, but am not sure how to do either. Any help appreciated.

Read the article
How to change resolution in Ubuntu 10.04, where xvinfo is showing no adapters present?

- by YumYum

I am trying to maximize my resolution where I have Resolution: 800x600 (4:3) and Refresh rate: 61Hz I tried the following, but it did not work: $ xvinfo X-Video Extension version 2.2 screen #0 no adaptors present $ cvt 1920 1080 # 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync $ xrandr --newmode clever_name 173.00 1920 2048 2248 2576 1080 1083 1088 1120 $ xrandr -q Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm 800x600 61.0* 640x480 60.0 clever_name (0x11d) 173.0MHz h: width 1920 start 2048 end 2248 total 2576 skew 0 clock 67.2KHz v: height 1080 start 1083 end 1088 total 1120 clock 60.0Hz $ xrandr --addmode default clever_name $ xrandr --output default --mode clever_name xrandr: Configure crtc 0 failed

Read the article
Can I ping via an arbitrary interface of a DD-WRT system? [migrated]

- by bytebuster

There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

Read the article
SSH from Windows Vista to Ubuntu (using cwrsync)

- by user39141

Newbie questoin but I can't seem to figure it out. Using cwrsync which in turn calls ssh.exe from a Windows Vista box to Ubuntu. For below, user in ubuntu is 'linuxuser' and user on Windows box is 'winuser' - remote box is 'linuxhost' and windows box is 'winhost' Exported keys such that on the remote box /home/linuxuser/.ssh/authorized_keys is correctly populated. Problem is when I launch ssh it tries to write to /home/winuser/.ssh instead of /cygdrive/home/users/winuser/.ssh as below. c:\Program Files (x86)\cwRsync\binssh linuxuser@linuxhost Could not create directory '/home/winuser/.ssh'. The authenticity of host 'linuxhost (192.168.1.105)' can't be establish ed. RSA key fingerprint is 67:10:a9:49:6e:a3:2b:4a:a0:e0:b7:75:76:da:c3:04. Are you sure you want to continue connecting (yes/no)? Host key verification failed.

Read the article
How to wipe the slate clean on an Oracle installation?

- by nw

After a basic, successful installation of Oracle 11g, I ran dbca again to enable Enterprise Manager on my database. The operation hung at around 67% for half an hour or more, so I clicked Stop to abort the operation. Things seemed to wrap up cleanly, EM was working, all was well with the world. Then I started getting this dreaded error upon any attempt to connect in SQL*Plus: ORA-12154: TNS:could not resolve the connect identifier specified I thought perhaps the database had been corrupted due to the earlier aborted operation, so I ran dbca again and deleted the database. Then I attempted to create a new database in its stead, using a clone of the template created the first time around. Unfortunately, the clone database operation fails at 50% with the exact same error: ORA-12154: TNS:could not resolve the connect identifier specified How can I clean up the mess I have created, short of reinstalling Oracle entirely from scratch?

Read the article
OpenVPN IPv6 over IPv4 tunnel

- by user66779

Today I installed OpenVPN 2.3rc2 on both my windows 7 client machine and centos 6 server. This new version of OpenVPN provides full compatibility for IPv6. The Problem: I am currently able to connect to the server (through the IPv4 tunnel) and ping the IPv6 address which is assigned to my client and I can also ping the tun0 interface on the server. However, I cannot browse to any IPv6 websites. My vps provider has given me this: 2607:f840:0044:0022:0000:0000:0000:0000/64 is routed to this server (2607:f840:0:3f:0:0:0:eda). This is ifconfig after setup with OpenVPN running: eth0 Link encap:Ethernet HWaddr 00:16:3E:12:77:54 inet addr:208.111.39.160 Bcast:208.111.39.255 Mask:255.255.255.0 inet6 addr: 2607:f740:0:3f::eda/64 Scope:Global inet6 addr: fe80::216:3eff:fe12:7754/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2317253 errors:0 dropped:7263 overruns:0 frame:0 TX packets:1977414 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1696120096 (1.5 GiB) TX bytes:1735352992 (1.6 GiB) Interrupt:29 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 inet6 addr: 2607:f740:44:22::1/64 Scope:Global UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:739567 errors:0 dropped:0 overruns:0 frame:0 TX packets:1218240 errors:0 dropped:1542 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:46512557 (44.3 MiB) TX bytes:1559930874 (1.4 GiB) So OpenVPN is sucessfully creating a tun0 interface and assigning clients IPv6 addresses using 2607:f840:44:22::/64. The first client to connect is getting 2607:f840:44:22::1000 and the second 2607:f840:44:22::1001, and so on... plus 1 each time. After connecting as the first client, I can ping from my windows client machine 2607:f740:44:22::1 and 2607:f740:44:22::1000. However, I have no access to IPv6 websites. I believe the problem is that the tun0 IPv6 addressees are not being forwarded to the eth0 interface. This is the firewall running on the server: #!/bin/sh # # iptables configuration script # # Flush all current rules from iptables # iptables -F iptables -t nat -F # # Allow SSH connections on tcp port 22 # iptables -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -j ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept connections on 1195 for vpn access from client # iptables -A INPUT -i eth0 -p udp --dport 1195 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 1195 -m state --state ESTABLISHED -j ACCEPT # # Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to 209.111.39.160 iptables -A FORWARD -j REJECT # # Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # IPv6 # IP6TABLES=/sbin/ip6tables $IP6TABLES -F INPUT $IP6TABLES -F FORWARD $IP6TABLES -F OUTPUT echo -n "1" >/proc/sys/net/ipv6/conf/all/forwarding echo -n "1" >/proc/sys/net/ipv6/conf/all/proxy_ndp echo -n "0" >/proc/sys/net/ipv6/conf/all/autoconf echo -n "0" >/proc/sys/net/ipv6/conf/all/accept_ra $IP6TABLES -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p icmpv6 -j ACCEPT $IP6TABLES -P INPUT ACCEPT $IP6TABLES -P FORWARD ACCEPT $IP6TABLES -P OUTPUT ACCEPT Server.conf: server-ipv6 2607:f840:44:22::/64 server 10.8.0.0 255.255.255.0 port 1195 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh2048.pem ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" keepalive 10 60 tls-auth ta.key 0 cipher AES-256-CBC comp-lzo user nobody group nobody persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 5 Client.conf: client dev tun nobind keepalive 10 60 hand-window 15 remote 209.111.39.160 1195 udp persist-key persist-tun ca ca.crt key client1.key cert client1.crt remote-cert-tls server tls-auth ta.key 1 comp-lzo verb 3 cipher AES-256-CBC I'm not sure where I am going wrong, it could be the firewall, or something missing from server or client.conf. This version of OpenVPN was only released yesterday, and there's little info on the internet about how to setup an IPv6 over IPv4 vpn tunnel. I've read the manual for this new version of OpenVPN (parts pertaining to IPv6) and it provides very little info too. Thanks for any help.

Read the article
Getting list of opened ssh connections by name

- by lyrae

I have a config file in my .ssh dir that looks like this Host somehostA HostName 123.45.67.89 User katsh So from my local machine, i can ssh into multiple machines by their name in the config file, like so ssh somehostA ssh somehostB ssh somehostC ... etc Is it possible to get a list of all machines i am connected to, by their name? I know I can do: lsof -i tcp -n | grep '\<ssh\>' and i'll get something like ssh 9871 katsh 3u IPv4 400199 0t0 TCP 987.654.2.2:47329->987.654.2.2:47329:ssh (ESTABLISHED) ssh 20554 katsh 3u IPv4 443965 0t0 TCP 123.456.7.8:41923->123.456.7.8:ssh (ESTABLISHED) But it does not list their names, just IP

Read the article
How to Extending a logical volume in WMWare

- by Mercer

down vote favorite i have a CentOS 6.3 into my Virtual Machine. I have 2 Disk: Disk#1 = 18G Disk#2 = 20G [root@vm ~]# df -h Filesystem Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_system-lv_root 1008M 250M 708M 27% / tmpfs 1.9G 0 1.9G 0% /dev/shm /dev/sda1 194M 31M 154M 17% /boot /dev/mapper/vg_system-lv_home 504M 17M 462M 4% /home /dev/mapper/vg_system-lv_opt 2.0G 68M 1.9G 4% /opt /dev/mapper/vg_produits-lv_grid 6.9G 2.5G 4.1G 38% /opt/grid /dev/mapper/vg_produits-lv_oracle 6.9G 144M 6.4G 3% /opt/oracle /dev/mapper/vg_system-lv_tmp 2.8G 71M 2.6G 3% /tmp /dev/mapper/vg_system-lv_usr 2.5G 1.6G 799M 67% /usr /dev/mapper/vg_system-lv_var 2.0G 278M 1.6G 15% /var So i want to extend my /tmp and my /opt/oracle like this: 10Go in/tmp 13Go in /opt/oracle Thx.

Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21 | Next Page >