Search Results

Search found 18157 results on 727 pages for 'nina null'.

Page 14/727 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• crontab still sending emails even with > /dev/null

  - by user2344668

  I have a crontab (root) that runs a script and output is set to /dev/null but I always get the emails whenever it runs. I only want to receive error emails. # Rackspace driveclient update (12pm MST) 0 12 * * * /root/scripts/driveclient-update > /dev/null The only way I can get it to turn off is to use /dev/null 2&1 but then I won't get error emails. This is happening on three different CentOS servers, two are 6.3 and one is 6.4. NOTE: I have read over and over that /dev/null is supposed to send stdout there and prevent the email if there is nothing but stdout from the script, so at works for at least some people; I cannot figure out why it is not working on these servers. Here's an example of where /dev/null is supposed to work: http://www.alphadevx.com/a/384-Suppressing-Cron-Job-Email-Notifications

  Read the article

• /dev/null file became regular file

  - by user197719

  In our production server suddenly /dev/null became a regular file and due to this sshd service got stopped and not able to login the server. And also we tried to the below steps to configure back to character device file, rm -rf /dev/null mknod /dev/null c 1 3 As soon as we run the rm command /dev/null is being re-created as a regular file before mknod can run. We can't figure out how this happening and which component is creating this file. So until we solve this issue we are unable to create /dev/null as character device file.

  Read the article

• Handling null values and missing object properties in Silverlight 4

  - by PeterTweed

  Before Silverlight 4 to bind a data object to the UI and display a message associated with either a null value or if the binding path was wrong, you would need to write a Converter.  In Silverlight 4 we find the addition of the markup extensions TargetNullValue and FallbackValue that allows us to display a value when a null value is found in the bound to property and display a value when the property being bound to is not found. This post will show you how to use both markup extensions. Steps: 1. Create a new Silverlight 4 application 2. In the body of the MainPage.xaml.cs file replace the MainPage class with the following code:     public partial class MainPage : UserControl     {         public MainPage()         {             InitializeComponent();             this.Loaded += new RoutedEventHandler(MainPage_Loaded);         }           void MainPage_Loaded(object sender, RoutedEventArgs e)         {             person p = new person() { NameValue = "Peter Tweed" };             this.DataContext = p;         }     }       public class person     {         public string NameValue { get; set; }         public string TitleValue { get; set; }     } This code defines a class called person with two properties.  A new instance of the class is created, only defining the value for one of the properties and bound to the DataContext of the page. 3.  In the MainPage.xaml file copy the following XAML into the LayoutRoot grid:         <Grid.RowDefinitions>             <RowDefinition Height="60*" />             <RowDefinition Height="28*" />             <RowDefinition Height="28*" />             <RowDefinition Height="30*" />             <RowDefinition Height="154*" />         </Grid.RowDefinitions>         <Grid.ColumnDefinitions>             <ColumnDefinition Width="86*" />             <ColumnDefinition Width="314*" />         </Grid.ColumnDefinitions>         <TextBlock Grid.Row="1" Height="23" HorizontalAlignment="Left" Margin="32,0,0,0" Name="textBlock1" Text="Name Value:" VerticalAlignment="Top" />         <TextBlock Grid.Row="2" Height="23" HorizontalAlignment="Left" Margin="32,0,0,0" Name="textBlock2" Text="Title Value:" VerticalAlignment="Top" />         <TextBlock Grid.Row="3" Height="23" HorizontalAlignment="Left" Margin="32,0,0,0" Name="textBlock3" Text="Non Existant Value:" VerticalAlignment="Top" />         <TextBlock Grid.Column="1" Grid.Row="1" Height="23" HorizontalAlignment="Left" Name="textBlock4" Text="{Binding NameValue, TargetNullValue='No Name!!!!!!!'}" VerticalAlignment="Top" Margin="6,0,0,0" />         <TextBlock Grid.Column="1" Grid.Row="2" Height="23" HorizontalAlignment="Left" Name="textBlock5" Text="{Binding TitleValue, TargetNullValue='No Title!!!!!!!'}" VerticalAlignment="Top" Margin="6,0,0,0" />         <TextBlock Grid.Column="1" Grid.Row="3" Height="23" HorizontalAlignment="Left" Margin="6,0,0,0" Name="textBlock6" Text="{Binding AgeValue, FallbackValue='No such property!'}" VerticalAlignment="Top" />    This XAML defines three textblocks – two of which use the TargetNull and one that uses the FallbackValue markup extensions.  4. Run the application and see the person name displayed as defined for the person object, the expected string displayed for the TargetNullValue when no value exists for the boudn property and the expected string displayed for the FallbackValue when the property bound to is not found on the bound object. It's that easy!

  Read the article

• Can not delete row from MySQL

  - by Drew

  Howdy all, I've got a table, which won't delete a row. Specifically, when I try to delete any row with a GEO_SHAPE_ID over 150000000 it simply does not disappear from the DB. I have tried: SQLyog to erase it. DELETE FROM TABLE WHERE GEO_SHAPE_ID = 150000042 (0 rows affected). UNLOCK TABLES then 2. As far as I am aware, bigint is a valid candidate for auto_increment. Anyone know what could be up? You gotta help us, Doc. We’ve tried nothin’ and we’re all out of ideas! DJS. PS. Here is the table construct and some sample data just for giggles. CREATE TABLE `GEO_SHAPE` ( `GEO_SHAPE_ID` bigint(11) NOT NULL auto_increment, `RADIUS` float default '0', `LATITUDE` float default '0', `LONGITUDE` float default '0', `SHAPE_TYPE` enum('Custom','Region') default NULL, `PARENT_ID` int(11) default NULL, `SHAPE_POLYGON` polygon default NULL, `SHAPE_TITLE` varchar(45) default NULL, `SHAPE_ABBREVIATION` varchar(45) default NULL, PRIMARY KEY (`GEO_SHAPE_ID`) ) ENGINE=MyISAM AUTO_INCREMENT=150000056 DEFAULT CHARSET=latin1 CHECKSUM=1 DELAY_KEY_WRITE=1 ROW_FORMAT=DYNAMIC; SET FOREIGN_KEY_CHECKS = 0; LOCK TABLES `GEO_SHAPE` WRITE; INSERT INTO `GEO_SHAPE` (`GEO_SHAPE_ID`, `RADIUS`, `LATITUDE`, `LONGITUDE`, `SHAPE_TYPE`, `PARENT_ID`, `SHAPE_POLYGON`, `SHAPE_TITLE`, `SHAPE_ABBREVIATION`) VALUES (57, NULL, NULL, NULL, 'Region', 10, NULL, 'Washington', 'WA'); INSERT INTO `GEO_SHAPE` (`GEO_SHAPE_ID`, `RADIUS`, `LATITUDE`, `LONGITUDE`, `SHAPE_TYPE`, `PARENT_ID`, `SHAPE_POLYGON`, `SHAPE_TITLE`, `SHAPE_ABBREVIATION`) VALUES (58, NULL, NULL, NULL, 'Region', 10, NULL, 'West Virginia', 'WV'); INSERT INTO `GEO_SHAPE` (`GEO_SHAPE_ID`, `RADIUS`, `LATITUDE`, `LONGITUDE`, `SHAPE_TYPE`, `PARENT_ID`, `SHAPE_POLYGON`, `SHAPE_TITLE`, `SHAPE_ABBREVIATION`) VALUES (59, NULL, NULL, NULL, 'Region', 10, NULL, 'Wisconsin', 'WI'); INSERT INTO `GEO_SHAPE` (`GEO_SHAPE_ID`, `RADIUS`, `LATITUDE`, `LONGITUDE`, `SHAPE_TYPE`, `PARENT_ID`, `SHAPE_POLYGON`, `SHAPE_TITLE`, `SHAPE_ABBREVIATION`) VALUES (150000042, 10, -33.8833, 151.217, 'Custom', NULL, NULL, 'Sydney%2C%20New%20South%20Wales%20%2810km%20r', NULL); INSERT INTO `GEO_SHAPE` (`GEO_SHAPE_ID`, `RADIUS`, `LATITUDE`, `LONGITUDE`, `SHAPE_TYPE`, `PARENT_ID`, `SHAPE_POLYGON`, `SHAPE_TITLE`, `SHAPE_ABBREVIATION`) VALUES (150000043, 10, -33.8833, 151.167, 'Custom', NULL, NULL, 'Annandale%2C%20New%20South%20Wales%20%2810km%', NULL); INSERT INTO `GEO_SHAPE` (`GEO_SHAPE_ID`, `RADIUS`, `LATITUDE`, `LONGITUDE`, `SHAPE_TYPE`, `PARENT_ID`, `SHAPE_POLYGON`, `SHAPE_TITLE`, `SHAPE_ABBREVIATION`) VALUES (150000048, 10, -27.5, 153.017, 'Custom', NULL, NULL, 'Brisbane%2C%20Queensland%20%2810km%20radius%2', NULL); INSERT INTO `GEO_SHAPE` (`GEO_SHAPE_ID`, `RADIUS`, `LATITUDE`, `LONGITUDE`, `SHAPE_TYPE`, `PARENT_ID`, `SHAPE_POLYGON`, `SHAPE_TITLE`, `SHAPE_ABBREVIATION`) VALUES (150000045, 10, 43.1002, -75.2956, 'Custom', NULL, NULL, 'New%20York%20Mills%2C%20New%20York%20%2810km%', NULL); INSERT INTO `GEO_SHAPE` (`GEO_SHAPE_ID`, `RADIUS`, `LATITUDE`, `LONGITUDE`, `SHAPE_TYPE`, `PARENT_ID`, `SHAPE_POLYGON`, `SHAPE_TITLE`, `SHAPE_ABBREVIATION`) VALUES (150000046, 10, 40.1117, -78.9258, 'Custom', NULL, NULL, 'Region1', NULL); UNLOCK TABLES; SET FOREIGN_KEY_CHECKS = 1;

  Read the article

• Calendar Table - Week number of month

  - by Saif Khan

  I have a calendar table with data from year 2000 to 2012 (2012 wasn't intentional!). I just realize that I don't have the week number of month (e.g In January 1,2,3,4 February 1,2,3,4) How do I go about calculating the week numbers in a month to fill this table? Here is the table schema CREATE TABLE [TCalendar] ( [TimeKey] [int] NOT NULL , [FullDateAlternateKey] [datetime] NOT NULL , [HolidayKey] [tinyint] NULL , [IsWeekDay] [tinyint] NULL , [DayNumberOfWeek] [tinyint] NULL , [EnglishDayNameOfWeek] [nvarchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [SpanishDayNameOfWeek] [nvarchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [FrenchDayNameOfWeek] [nvarchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [DayNumberOfMonth] [tinyint] NULL , [DayNumberOfYear] [smallint] NULL , [WeekNumberOfYear] [tinyint] NULL , [EnglishMonthName] [nvarchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [SpanishMonthName] [nvarchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [FrenchMonthName] [nvarchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [MonthNumberOfYear] [tinyint] NULL , [CalendarQuarter] [tinyint] NULL , [CalendarYear] [char] (4) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [CalendarSemester] [tinyint] NULL , [FiscalQuarter] [tinyint] NULL , [FiscalYear] [char] (4) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [FiscalSemester] [tinyint] NULL , [IsLastDayInMonth] [tinyint] NULL , CONSTRAINT [PK_TCalendar] PRIMARY KEY CLUSTERED ( [TimeKey] ) ON [PRIMARY] ) ON [PRIMARY] GO

  Read the article

• Assets.getBytes returns null in test environment

  - by ashes999

  I'm using the latest Haxe (2.10), NME (3.4.3), and MUnit. I've written some unit tests that need to fetch bitmap data from SWF symbols. The first step is to actually load the SWF data. To do this, I use NME's getByteArray along with the swf library, like so: var blah:SWF = new SWF(Assets.getBytes("assets/swf/test.swf")); The call to Assets.getBytes returns null when I'm running this under MUnit. When running my actual game code, I'm able to get the byte array (and consequentially, instantiate the SWF class). Am I doing something wrong? What am I missing? Edit: My directory structure is: . (root .\assets .\assets\*.png (other images) .\assets\swf\*.swf (SWFs) .\Source\*.hx (source code) .\Test\*.hx (tests)

  Read the article

• Null Or Empty Coalescing

  In my last blog post, I wrote about the proper way to check for empty enumerations and proposed an IsNullOrEmpty method for collections which sparked a lot of discussion. This post covers a similar issue, but from a different angle. A very long time ago, I wrote about my love for the null coalescing operator. However, over time, Ive found it to be not quite as useful as it could be when dealing with strings. For example, heres the code I might want to write: public static void DoSomething(string...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Application not releasing database connection Spring.net + NHibernate

  - by anupam3m

  Even after successful transaction.Application connection with the database persist.in Nhibernate log it shows Nhibernate Log 2010-05-21 14:45:08,428 [Worker] [0] DEBUG NHibernate.Impl.SessionImpl [(null)] <(null) - executing flush 2010-05-21 14:45:08,428 [Worker] [0] DEBUG NHibernate.Impl.ConnectionManager [(null)] <(null) - registering flush begin 2010-05-21 14:45:08,428 [Worker] [0] DEBUG NHibernate.Impl.ConnectionManager [(null)] <(null) - registering flush end 2010-05-21 14:45:08,428 [Worker] [0] DEBUG NHibernate.Impl.SessionImpl [(null)] <(null) - post flush 2010-05-21 14:45:08,428 [Worker] [0] DEBUG NHibernate.Impl.SessionImpl [(null)] <(null) - before transaction completion 2010-05-21 14:45:08,428 [Worker] [0] DEBUG NHibernate.Impl.ConnectionManager [(null)] <(null) - aggressively releasing database connection 2010-05-21 14:45:08,428 [Worker] [0] DEBUG NHibernate.Connection.ConnectionProvider [(null)] <(null) - Closing connection 2010-05-21 14:45:08,428 [Worker] [0] DEBUG NHibernate.Impl.SessionImpl [(null)] <(null) - transaction completion 2010-05-21 14:45:08,428 [Worker] [0] DEBUG NHibernate.Transaction.AdoTransaction [(null)] <(null) - running AdoTransaction.Dispose() 2010-05-21 14:45:08,428 [Worker] [0] DEBUG NHibernate.Impl.SessionImpl [(null)] <(null) - closing session 2010-05-21 14:45:08,428 [Worker] [0] DEBUG NHibernate.Impl.BatcherImpl [(null)] <(null) - running BatcherImpl.Dispose(true) Underneath given is my dataconfiguration file -- Risco.Rsp.Ac.RMAC.Mapping Risco.Rsp.Ac.Logging.Appenders -- Please help me out with this issue.Thanks

  Read the article

• TypeError: Cannot call method 'hasOwnProperty' of null, while creating a QMLscene window

  - by tomoqv

  I am trying to make a simple Ubuntu Touch web application with Qt Creator. I have set up a new project according to the tutorial and committed the files to Bazaar. I have set a url instead of the default index.htm in the qml file of the project. Using build-run loads a QML Scene window with the desired webpage, but Qt Creator yields the following output: Starting /usr/lib/i386-linux-gnu/qt5/bin/qmlscene -I /home/tomas/ubuntu-sdk/SL-planner -I /usr/bin -I /usr/lib/i386-linux-gnu/qt5/qml /home/tomas/ubuntu-sdk/SL-planner/SL-planner.qml unity::action::ActionManager::ActionManager(QObject*): Could not determine application identifier. HUD will not work properly. Provide your application identifier in $APP_ID environment variable. file:///usr/lib/i386-linux-gnu/qt5/qml/Ubuntu/Components/MainView.qml:257: TypeError: Cannot call method 'hasOwnProperty' of null My SL-planner.qml looks like this: import QtQuick 2.0 import Ubuntu.Components 0.1 import QtWebKit 3.0 /*! \brief MainView with a Flickable WebView. */ MainView { // objectName for functional testing purposes (autopilot-qt5) objectName: "mainView" // Note! applicationName needs to match the "name" field of the click manifest applicationName: "com.ubuntu.developer.tomoqv.SL-planner" /* This property enables the application to change orientation when the device is rotated. The default is false. */ automaticOrientation: true width: units.gu(100) height: units.gu(75) Flickable { id: webViewFlickable anchors.fill: parent WebView { id: webView anchors.fill: parent url: "http://mobil.sl.se" } } } What am I missing?

  Read the article

• Why does glGetString returns a NULL string

  - by snape

  I am trying my hands at GLFW library. I have written a basic program to get OpenGL renderer and vendor string. Here is the code #include <GL/glew.h> #include <GL/glfw.h> #include <cstdio> #include <cstdlib> #include <string> using namespace std; void shutDown(int returnCode) { printf("There was an error in running the code with error %d\n",returnCode); GLenum res = glGetError(); const GLubyte *errString = gluErrorString(res); printf("Error is %s\n", errString); glfwTerminate(); exit(returnCode); } int main() { // start GL context and O/S window using GLFW helper library if (glfwInit() != GL_TRUE) shutDown(1); if (glfwOpenWindow(0, 0, 0, 0, 0, 0, 0, 0, GLFW_WINDOW) != GL_TRUE) shutDown(2); // start GLEW extension handler glewInit(); // get version info const GLubyte* renderer = glGetString (GL_RENDERER); // get renderer string const GLubyte* version = glGetString (GL_VERSION); // version as a string printf("Renderer: %s\n", renderer); printf("OpenGL version supported %s\n", version); // close GL context and any other GLFW resources glfwTerminate(); return 0; } I googled this error and found out that we have to initialize the OpenGL context before calling glGetString(). Although I have initialized OpenGL context using glfwInit() but still the function returns a NULL string. Any ideas? Edit I have updated the code with error checking mechanisms. This code on running outputs the following There was an error in running the code with error 2 Error is no error

  Read the article

• RasterizerState set to null after calling DrawText in Nuclex

  - by ProgrammerAtWork

  I have the following code in XNA: // class members Text t1; Text t2; Text t3; // init // Debugfont is size 24 vectorfont t1 = MM.DebugFont24.Fill("hello"); t1 = MM.DebugFont24.Extrude("hello"); t2 = MM.DebugFont24.Fill("hello"); t2 = MM.DebugFont24.Extrude("hello"); t3 = MM.DebugFont24.Fill("hello"); t3 = MM.DebugFont24.Extrude("hello"); // Draw TextBatch test = new TextBatch(MM.GD); test.DrawText(t1, Color.Red); test.DrawText(t2, Color.Red); test.DrawText(t3, Color.Red); test.End(); //After the second call to the TextBatch, RasterizerState of the GraphicsDevice is set to null //But I don't get any runtime errors or any indication of that something is wrong. Is this supposed to happen? Or am I doing something wrong? I've discovered that this happened because culling was set to None when I was rendering textures

  Read the article

• Can't remove software - Installed in NULL

  - by ChosSimbaOne

  I've installed software to our administration machine. The problem is that i cannot start the software or uninstall it, as it is not in any directory on the machine. I tried to install it at /pack/CST/... but it is not there and a locate on CST or cst returns nothing. The software is installed from a DVD and not a repository. I've tried to reboot the machine, as i thought i might had something to do with the software being loaded in some sort of tmpfs but that didn't help. I've looked through the entire /etc to check for any relations to the software, but unsuccessfully. I'm out of ideas, to what can cause this problem, anyone got any ideas?? EDIT: I downloaded the iso wich i mounted with: sudo mount -o loop /path/to/iso.iso /path/to/mountpoint sudo /path/to/mountpoint/install.sh Ran the install GUI via an X-session. I choose to install the software in /pack/CST/... but when it exited it said that the software had been installed to /tmp/... There was nothing in tmp, so i decided to reboot the machine and did a full find to see if there was anything left of the software, removed what looked like it could be related. It had placed a script in all the /etc/rs* folder which I removed with: sudo update-rc.d -f scriptname -r I rebooted the machine again, just to be sure. When i run the installer again, it tells me that the software is installed in NULL and i have to remove before installing it. /pack/ is a mountpoint for /q/system/pack What i expected was that the software would be installed in /pack/CST, but it seems to be lock in the system, but I am unable to locate where.

  Read the article

• Bug: unable to handle kernel NULL pointer dereference at

  - by maria

  I have recently installed new system on my disc, Ubuntu 12.04. Installation proceeded without problems, I started installing additional software and put data from other discs. I had already two times bug report, it was quite long, and I have no idea how to acces to log file (which probably is somewhere saved) and since I had to switch off the computer using the button, anything else was possible, here is just a small part of it (what I've noted on paper) could not write bytes: Broken pipe speach dicpatcher disabled: edit etc/default/speach-dispatcher saned disabled: edit .... and than: BUG: unable to handle kernel NULL pointer dereference at 0000009c I've run Memory test in GRUB, everything is fine. First time it occured when I was using rsync, second time when I was trying to install texlive. Should I install whole system once again? Or can it be hardware problem? Or something else? If there is any hardware details which may be relevant, please ask, since I have no idea what is happening, I don't know what kind of information could be useful. Thanks P.S. dmesg output:

  Read the article

• jQuery 1.4.4 - issue with attr('selected', null)

  - by Renso

  Issue: The code below worked before under version jQuery 1.4.2 but when I upgraded to version 1.4.4 it no longer worked as expected - it did not unselect the list box item, only setting "selectd" worked:         _handleClick: function(elem) {             var self = this; var initElem = this.element;             var checked = $(elem).attr('checked');             var myId = elem.attr('id').replace(initElem.attr('id') + '_chk_', '');             initElem.children('option[value=' + myId + ']').attr('selected', function() {                 if (checked) {                     return 'selected';                 } else { return null; }             });             if ($.isFunction(self.options.onItemSelected)) {                 try {                     self.options.onItemSelected(elem, initElem.children('option').get());                 } catch (ex) {                     if (self.options.allowDebug)                         alert('select function failed: ' + ex.Description);                 }             }         }, Solution: Under jQuery 1.4.4 you need to explicitly remove the attribute as in "removeAttr('selected'):         _handleClick: function(elem) {             var self = this; var initElem = this.element;             var checked = $(elem).is(':checked');             var myId = elem.attr('id').replace(initElem.attr('id') + '_chk_', '');             if (checked) {                 initElem.children('option[value=' + myId + ']').attr('selected', 'selected');             } else {                 initElem.children('option[value=' + myId + ']').removeAttr('selected');             }             if ($.isFunction(self.options.onItemSelected)) {                 try {                     self.options.onItemSelected(elem, initElem.children('option').get());                 } catch (ex) {                     if (self.options.allowDebug)                         alert('select function failed: ' + ex.Description);                 }             }         },

  Read the article

• zend tool is not working

  - by user362155

  Hi, I've installed ZendStudio 7.2 it creates project normally with no error but when i try to add action(s) in it, it says project profile does not exist. and the error log is as follow: executing zf create action showLatest index-action-included An Error Has Occurred A project profile was not found. Zend Framework Command Line Console Tool v1.10.2 Details for action "Create" and provider "Action" Action zf create action name controller-name[=Index] view-included[=1] module Failed loading ./ZendDebugger.so: (null) PHP Warning: PHP Startup: Unable to load dynamic library './ext/bcmath.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/bz2.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/calendar.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/ctype.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/curl.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/exif.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/fileinfo.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/ftp.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/gd.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/imagick.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/json.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/ldap.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mbstring.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mcrypt.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/memcache.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mhash.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mime_magic.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mssql.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mysql.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mysqli.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/pcntl.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/pgsql.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/posix.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/shmop.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/soap.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sockets.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sqlite.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sysvmsg.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sysvsem.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sysvshm.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/tidy.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/tokenizer.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/wddx.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/xmlreader.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/xmlrpc.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/xsl.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/zip.so' - (null) in Unknown on line 0 please help me to configure latest ZendTool with ZendStudio 7.2 or how can i get rid of this. i am runin ZS 7.2 on my mac os x 10.5.8 thanks.

  Read the article

• Suppress Null Value Types from Being Emitted by XmlSerializer

  - by Ben Griswold

  Please consider the following Amount value type property which is marked as a nullable XmlElement: [XmlElement(IsNullable=true)] public double? Amount { get ; set ; } When a nullable value type is set to null, the C# XmlSerializer result looks like the following: <amount xsi:nil="true" /> Rather than emitting this element, I would like the XmlSerializer to suppress the element completely. Why? We're using Authorize.NET for online payments and Authorize.NET rejects the request if this null element exists. The current solution/workaround is to not serialize the Amount value type property at all. Instead we have created a complementary property, SerializableAmount, which is based on Amount and is serialized instead. Since SerializableAmount is of type String, which like reference types are suppressed by the XmlSerializer if null by default, everything works great. /// <summary> /// Gets or sets the amount. /// </summary> [XmlIgnore] public double? Amount { get; set; } /// <summary> /// Gets or sets the amount for serialization purposes only. /// This had to be done because setting value types to null /// does not prevent them from being included when a class /// is being serialized. When a nullable value type is set /// to null, such as with the Amount property, the result /// looks like: &gt;amount xsi:nil="true" /&lt; which will /// cause the Authorize.NET to reject the request. Strings /// when set to null will be removed as they are a /// reference type. /// </summary> [XmlElement("amount", IsNullable = false)] public string SerializableAmount { get { return this.Amount == null ? null : this.Amount.ToString(); } set { this.Amount = Convert.ToDouble(value); } } Of course, this is just a workaround. Is there a cleaner way to suppress null value type elements from being emitted?

  Read the article

• Explaining NULL and Empty to your 6-year old?

  - by Atomiton

  I'm thinking in terms of Objects here. I think it's important to simplify ideas. If you can explain this to a 6-year old, you can teach new programmers the difference. I'm thinking that a cookie object would be apropos: public class Cookie { public string flavor {get; set; } public int numberOfCrumbs { get; set; } }

  Read the article

• When I create a new String in Java, is it initialized with null or with " "?

  - by Sergio Tapia

  Here's my test code: String foo = new String(); System.out.println(foo); The output is blank and a new line is written. Since I'm new to Java, I don't know whether it made a " " string, or nulls are handled as blank lines.

  Read the article

• How to check that string is not null or Nan and is less than 108 and greater than 1?

  - by Steven Spielberg

  Do you know how to use int in Javascript? How can I check that a string contains an int or not? How can I check that int is less than 108 and greater than 1?

  Read the article

• Filtering null values with pig

  - by arianp

  It looks like a silly problem, but I can´t find a way to filter null values from my rows. This is the result when I dump the object geoinfo: DUMP geoinfo; ([longitude#70.95853,latitude#30.9773]) ([longitude#-9.37944507,latitude#38.91780853]) (null) (null) (null) ([longitude#-92.64416,latitude#16.73326]) (null) (null) ([longitude#-9.15199849,latitude#38.71179122]) ([longitude#-9.15210796,latitude#38.71195131]) here is the description DESCRIBE geoinfo; geoinfo: {geoLocation: bytearray} What I'm trying to do is to filter null values like this: geoinfo_no_nulls = FILTER geoinfo BY geoLocation is not null; but the result remains the same. nothing is filtered. I also tried something like this geoinfo_no_nulls = FILTER geoinfo BY geoLocation != 'null'; and I got an error org.apache.pig.backend.executionengine.ExecException: ERROR 1071: Cannot convert a map to a String What am I doing wrong? details, running on ubuntu, hadoop-1.0.3 with pig 0.9.3 pig -version Apache Pig version 0.9.3-SNAPSHOT (rexported) compiled Oct 24 2012, 19:04:03 java version "1.6.0_24" OpenJDK Runtime Environment (IcedTea6 1.11.4) (6b24-1.11.4-1ubuntu0.12.04.1) OpenJDK 64-Bit Server VM (build 20.0-b12, mixed mode)

  Read the article

• C# Automatic Properties - Still null after +=?

  - by Sam Schutte

  This seems like a bug to me... I accept that automatic properties, defined as such: public decimal? Total { get; set; } Will be null when they are first accessed. They haven't been initialized, so of course they are null. But, even after setting their value through +=, this decimal? still remains null. So after: Total += 8; Total is still null. How can this be correct? I understand that it's doing a (null + 8), but seems strange that it doesn't pick up that it means it should just be set to 8... Addendums: I made the "null + 8" point in my question - but notice that it works with strings. So, it does null + "hello" just fine, and returns "hello". Therefore, behind the scenes, it is initializing the string to a string object with the value of "hello". The behavior should be the same for the other types, IMO. It might be because a string can accept a null as a value, but still, a null string is not an initialized object, correct? Perhaps it's just because a string isn't a nullable...

  Read the article

• (NOT) NULL for NVARCHAR columns

  - by Anders Abel

  Allowing NULL values on a column is normally done to allow the absense of a value to be represented. When using NVARCHAR there is aldready a possibility to have an empty string, without setting the column to NULL. In most cases I cannot see a semantical difference between an NVARCHAR with an empty string and a NULL value for such a column. Setting the column as NOT NULL saves me from having to deal with the possibility of NULL values in the code and it feels better to not have to different representations of "no value" (NULL or an empty string). Will I run into any other problems by setting my NVARCHAR columns to NOT NULL. Performance? Storage size? Anything I've overlooked on the usage of the values in the client code?

  Read the article

• SQL Server JOIN with optional NULL values

  - by Paul McLoughlin

  Imagine that we have two tables as follows: Trades ( TradeRef INT NOT NULL, TradeStatus INT NOT NULL, Broker INT NOT NULL, Country VARCHAR(3) NOT NULL ) CTMBroker ( Broker INT NOT NULL, Country VARCHAR(3) NULL ) (These have been simplified for the purpose of this example). Now, if we wish to join these two tables on the Broker column, and if a country exists in the CTMBroker table on the Country, we have the following two choices: SELECT T.TradeRef,T.TradeStatus FROM Trades AS T JOIN CTMBroker AS B ON B.Broker=T.Broker AND ISNULL(B.Country, T.Country) = T.Country or SELECT T.TradeRef,T.TradeStatus FROM Trades AS T JOIN CTMBroker AS B ON B.Broker=T.Broker AND (B.COUNTRY=T.Country OR B.Country IS NULL) These are both logically equivalent, however in this specific circumstance for our database (SQL Server 2008, SP1) two different execution plans are produced for these two queries with the second version significantly outperforming the first version in terms of both time and logical reads. My question really is as follows: as a general rule would (2) be preferred to (1), or does this just happen to be exploiting some particular idiosyncracy of the optimiser in 2008 SP1 (that could therefore change with future versions of SQL Server).

  Read the article

• Count The Amount Of Data In An Array Including SOME Null

  - by Josephine

  I'm coding in java and I need to create a function that returns the number of Data objects that are currently in an ArrayList. At the moment I have this: int count = 0; for (int i = 0; i < data.length; i++) { if (data[i] != null) { count ++; } } return count; But the problem is that an array list that includes null data is acceptable, and I have to count their null data towards this counter. How do I include the null data that's in the middle of this array, and not the null data that's not supposed to be counted for? For example, I have some tester code that adds (8),null,null,(23),(25) to the array, and this function should return 5 when the initial array size is 10. Thank you so much

  Read the article

• MySql, InnoDB & Null Values

  - by pws5068

  Formerly I was using MyISAM storage engine for MySql and I had defined the combination of three fields to be unique. Now I have switched to InnoDB, which I assume caused this problem, and now NULL != NULL. So for the following table: ID (Auto) | Field_A | Field_B | Field_C I can insert (Field_A,Field_B,Field_C) Values(1,2,NULL) (1,2,NULL) (1,2,NULL) infinitely many times. How can I prevent this behavior?

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >