Search Results

Search found 2630 results on 106 pages for 't mount'.

Page 14/106 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Mounting filesystem with special user id set

    - by qbi
    I want to mount the device /dev/sda3 to the directory /foo/bar/baz. After mounting the directory should have the uid of user johndoe. So I did: sudo -u johndoe mkdir /foo/bar/baz stat -c %U /foo/bar/baz johndoe and added the following line to my /etc/fstab: /dev/sda3 /foo/bar/baz ext4 noexec,noatime,auto,owner,nodev,nosuid,user 0 1 When I do now sudo -u johndoe mount /dev/sda3 the command stat -c %U /foo/bar/baz results in root rather than johndoe. What is the best way to mount this ext4-filesystem with uid johndoe set?

    Read the article

  • USB Storage Device Automount

    - by matto1990
    Under Ubuntu 10.04 one of the problems which appeared is that USB devices would no longer automatically mount when plugged in. Normally I would get a pop up message asking what application I wanted to open the newly plugged in device with, however now that doesn't happen. This happens regardless of the way the device is formatted (NTFS or FAT32) and all other USB devices (printer, keyboard and mouse) work perfectly. My current solution is the mount them manually using sudo mount dev/... /medai/... however to be honest I'm just getting tired of having to do this. I'm happy to post any extra information you are likely to need. I know there will be lots of places I could look to find out what's going wrong but I have no idea where to start really.

    Read the article

  • why does my lubuntu recognizes only lubuntu instalation cds?

    - by Hardi
    I installed lubuntu from alternate cd a month ago. Now when I needed to read some cd's, the cd try won't open. It can be opened before ubuntu boots up. It can be opened after entering sudo eject -i off from console. But it won't mount any other cd-roms, than just the lubuntu live-cd and lubuntu alternate instal cd, where it was installed from. "mount: no medium found on /dev/sr0" as output, when try to mount anything else. Problem can't be in corrupted sd's, because othe computer, did recognize them well.

    Read the article

  • How do I mount a "GPT Protective Partition" in Windows XP?

    - by Michael Haren
    I formatted an external USB harddrive while it was connected to a 32-bit Windows 2003 Server Std. edition server. After loading it up with files, I moved it to my Windows XP SP3 where it didn't show up automatically in My Computer. I opened up Computer ManagementDisk Management and see it listed as a "Health (GPT Protective Parititon)". What's up with that? Can I mount it?

    Read the article

  • How do software .dmg files mount or work in OS X?

    - by ymasood
    I am a new Mac user and have an iMac. Coming from the Windows world where everything is installer based, OS X seems to mount .dmg files and run them. I've seen this happen prior to an install and later it requests us to move an icon to the Applications folder. Could someone help me unclutter the install process on OS X. What or how does it work? Thanks in advance!

    Read the article

  • Linux fsck.ext3 says "Device or resource busy" although I did not mount the disk.

    - by matnagel
    I am running an ubuntu 8.04 server instance with a 8GB virtual disk on vmware 1.0.9. For disk maintenance I made a copy of the virtual disk (by making a copy of the 2 vmdk files of sda on the stopped vm on the host) and added it to the original vm. Now this vm has it's original virtual disk sda plus a 1:1 copy (sdd). There are 2 additional disk sdb and sdc which I ignore.) I would expect sdb not to be mounted when I start the vm. So I try tp do a ext2 fsck on sdd from the running vm, but it reports fsck reported that sdb was mounted. $ sudo fsck.ext3 -b 8193 /dev/sdd e2fsck 1.40.8 (13-Mar-2008) fsck.ext3: Device or resource busy while trying to open /dev/sdd Filesystem mounted or opened exclusively by another program? The "mount" command does not tell me sdd is mounted: $ sudo mount /dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) /sys on /sys type sysfs (rw,noexec,nosuid,nodev) varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755) varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777) udev on /dev type tmpfs (rw,mode=0755) devshm on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sdc1 on /mnt/r1 type ext3 (rw,relatime,errors=remount-ro) /dev/sdb1 on /mnt/k1 type ext3 (rw,relatime,errors=remount-ro) securityfs on /sys/kernel/security type securityfs (rw) When I ignore the warning and continue the fsck, it reported many errors. How do I get this under control? Is there a better way to figure out if sdd is mounted? Or how is it "busy? How to unmount it then? How to prevent ubuntu from automatically mounting. Or is there something else I am missing? Also from /var/log/syslog I cannot see it is mounted, this is the last part of the startup sequence: kernel: [ 14.229494] ACPI: Power Button (FF) [PWRF] kernel: [ 14.230326] ACPI: AC Adapter [ACAD] (on-line) kernel: [ 14.460136] input: PC Speaker as /devices/platform/pcspkr/input/input3 kernel: [ 14.639366] udev: renamed network interface eth0 to eth1 kernel: [ 14.670187] eth1: link up kernel: [ 16.329607] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/ kernel: [ 16.367540] parport_pc 00:08: reported by Plug and Play ACPI kernel: [ 16.367670] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] kernel: [ 19.425637] NET: Registered protocol family 10 kernel: [ 19.437550] lo: Disabled Privacy Extensions kernel: [ 24.328857] loop: module loaded kernel: [ 24.449293] lp0: using parport0 (interrupt-driven). kernel: [ 26.075499] EXT3 FS on sda1, internal journal kernel: [ 28.380299] kjournald starting. Commit interval 5 seconds kernel: [ 28.381706] EXT3 FS on sdc1, internal journal kernel: [ 28.381747] EXT3-fs: mounted filesystem with ordered data mode. kernel: [ 28.444867] kjournald starting. Commit interval 5 seconds kernel: [ 28.445436] EXT3 FS on sdb1, internal journal kernel: [ 28.445444] EXT3-fs: mounted filesystem with ordered data mode. kernel: [ 31.309766] eth1: no IPv6 routers present kernel: [ 35.054268] ip_tables: (C) 2000-2006 Netfilter Core Team mysqld_safe[4367]: started mysqld[4370]: 100124 14:40:21 InnoDB: Started; log sequence number 0 10130914 mysqld[4370]: 100124 14:40:21 [Note] /usr/sbin/mysqld: ready for connections. mysqld[4370]: Version: '5.0.51a-3ubuntu5.4' socket: '/var/run/mysqld/mysqld.sock' port: 3 /etc/mysql/debian-start[4417]: Upgrading MySQL tables if necessary. /etc/mysql/debian-start[4422]: Looking for 'mysql' in: /usr/bin/mysql /etc/mysql/debian-start[4422]: Looking for 'mysqlcheck' in: /usr/bin/mysqlcheck /etc/mysql/debian-start[4422]: This installation of MySQL is already upgraded to 5.0.51a, u /etc/mysql/debian-start[4436]: Checking for insecure root accounts. /etc/mysql/debian-start[4444]: Checking for crashed MySQL tables.

    Read the article

  • Is it possible to change the mount point used for external USB devices from /media to something else under GNOME?

    - by slm
    I'm using CentOS 5.x and am trying to change the mount point that get's used when I insert a USB thumb drive or external USB drive. They're showing up under /media/KINGSTON for example. I'd like to change this so that they show up under /external/KINGSTON for example. If you must know my reasons for asking this, I have a domain where they're already using /media for something else and it would be more work to move this domain's automount from /media to something else. I'm trying to explore all my options before I decide on a path forward. Thanks!

    Read the article

  • Partition and mount my secondary hard drive on CentOS 5.5 64bit?

    - by Andrew Fashion
    I am trying to prepare my second hard drive for user image uploads. Here is the current layout: # sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. I am assuming #4 is my secondary drive? How do I partition and mount it so I can begin using it? And how do I add to fstab? I understand if it's to many questions in one, just help me with whatever you can I guess :) Thank you for any help!

    Read the article

  • Error mounting: mount exited with exit code 13

    - by Mike Williamson
    I keep a windows partition on my laptop for the occaisional bit of Photoshop work. A while ago I noticed that Windows had disappeared from my grub boot menu and when I try to mount the windows partion, my system hangs for a bit and then I get this: Unable to mount 105 GB Filesystem Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to calculate free MFT records: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It seems that chkdsk is a windows command but since I can't boot into windows (since its the windows partition that is the problem) I'm not sure what to do. Here is the output of fdisk to give you the lay of the land: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x98000000 Device Boot Start End Blocks Id System /dev/sda1 1 10199 81923436 83 Linux /dev/sda2 * 10200 22947 102398310 7 HPFS/NTFS /dev/sda3 22948 29164 49938052+ 83 Linux /dev/sda4 29165 30401 9936202+ 5 Extended /dev/sda5 29165 30401 9936171 82 Linux swap / Solaris Any guidance would be appreciated!

    Read the article

  • Prevent Nautilus from displaying thumbnails on a specific mount

    - by Zakhar
    I have written a filesystem over Fuse to access a remote pseudo-NAS (the French "Freebox V6", I'll soon publish it as GPL3... when it's a little bit more polished!). The NAS is connected to a home ADSL, thus data comes down at the upload speed of ADSL, which is at best 1Mbps. My mount works fine (read-only at the moment), but Nautilus sees the mountpoint (and all sub-directories) as a "local" filesystem and tries to make thumbnails. As I have a directory full of images, this is quite horrible, because Nautilus then opens ALL the images to try to display the thumbnail. I could switch the Nautilus preferences to "Never" for thumbnails, but then I'll loose thumbnails on my "real" local filesystem. So the question is: with the preference "Only for local filesystem", how can I instruct Nautilus that my mountpoint is in fact NOT a local mount so that it will stop trying to draw thumbnails on that specific mount, but continue "thumbnailing" on mounts that are really local? Edit note: the same things happens if you use "standard worldwide" mounts such as sshfs, davfs,... as long as you mount over a relatively slow network (ADSL) and have images/movies on your mounted tree.

    Read the article

  • NFS mount of /var/www to OS X

    - by ploughguy
    I have spent 2 hours trying to create an NFS mount from my Ubuntu 10.04 LTS server to my OS X desktop system. Objective: three way file compare between the code base on the Mac, the development system on the local Linux test system, and the hosted website. The hosted service uses cpanel so I can mount a webdisk - easy as pie - took 10 seconds. The local Ubuntu box, on the other hand - nothing but pain and frustration. Here is what I have tried: In File Browser, navigate to /var/www/site and right-click. Select share this folder. Enter sharename wwwsite and a comment. Click button "Create Share". Message says - you can only share file systems you own. There is a message on how to fix this, but the killer is that this is sharing by SMB. It will change the LFs to CR-LFs which will affect the file comparison. So forget this option. In a terminal window, run shares-admin (I have not been able to convince it to give me the "Shared Folders" option in the System Administration window - Maybe it is somewhere else in the menu, but I cannot find it) define an NFS export. Enter the path /var/www/site, select NFS enter the ip address of the iMac and save. On the mac, try to mount the file system using the usual methods - finder, command line "mount" command - not found. Nothing. Tried restarting the linux box in case there is a daemon that needs restarting - nothing. So I have run out of stuff to do. I have tried searching the documentation - it is pretty basic. The man page documentation is as opaque as ever. Please, oh please, will someone help me to get this @38&@^# thing to work! Thanks for reading this far... PG.

    Read the article

  • Using DNFS for test purposes

    - by rene.kundersma
    Because of other priorities such as bringing the first v2 Database Machine in Netherlands into production I did spend less time on my blog that planned. I do however like to tell some things about DNFS, the build-in NFS client we have in Oracle RDBMS since 11.1. What DNFS is and how to set it up can all be found here . As you see this documentation is actually the "Clusterware Installation Guide". I think that is weird, I would expect this to be part of the Admin Guide, especially the "Tablespace" chapter. I do however want to show what I did not find in the documentation that quickly (and solved after talking to my famous colleague "the prutser"): First, a quick setup: 1. The standard ODM library needs to be replaced with the NFS ODM library: [oracle@ocm01 ~]$ cp $ORACLE_HOME/lib/libodm11.so $ORACLE_HOME/lib/libodm11.so_stub [oracle@ocm01 ~]$ ln -s $ORACLE_HOME/lib/libnfsodm11.so $ORACLE_HOME/lib/libodm11.so After changing to this library you will notice the following in your alert.log: Oracle instance running with ODM: Oracle Direct NFS ODM Library Version 2.0 2. The intention is to mount the datafiles over normal NAS (like NetApp). But, in case you want to test yourself and use an exported NFS filesystem, it should look like the following: [oracle@ocm01 ~]$ cat /etc/exports /u01/scratch/nfs *(rw,sync,insecure) Please note the "insecure" option in the export, since you will not be able to use DNFS without it if you export a filesystem from a host. Without the "insecure" option the NFS server considers the port used by the database "insecure" and the database is unable to acquire the mount: Direct NFS: NFS3ERR 1 Not owner. path ocm01.nl.oracle.com mntport 930 nfsport 2049 3. Before configuring the new Oracle stanza for NFS we still need to configure a regular kernel NFS mount: [root@ocm01 ~]# cat /etc/fstab | grep nfs ocm01.nl.oracle.com:/u01/scratch/nfs /incoming nfs rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,actimeo=0,vers=3,timeo=600 4. Then a so called Oracle-'nfstab' needs to be created that specifies what the available exports to use: [oracle@ocm01 ~]$ cat /etc/oranfstab server:ocm01.nl.oracle.com path:192.168.1.40 export:/u01/scratch/nfs mount:/incoming 5. Creating a tablespace with a datafile on the NFS location: SQL create tablespace rk datafile '/incoming/rk.dbf' size 10M; Tablespace created. Be sure to know that it may happen that you do not specify the insecure option (like I did). In that case you will still see output from the query v$dnfs_servers: SQL select * from v$dnfs_servers; ID SVRNAME DIRNAME MNTPORT NFSPORT WTMAX RTMAX -- -------------------- ----------------- --------- ---------- ------ ------ 1 ocm01.nl.oracle.com /u01/scratch/nfs 684 2049 32768 32768 But, querying v$dnfsfiles and v$dnfs_channels will now return any result, and indeed, you will see the following message in the alert-log when you create a file : Direct NFS: NFS3ERR 1 Not owner. path ocm01.nl.oracle.com mntport 930 nfsport 2049 After correcting the export: SQL select * from v$dnfs_files; FILENAME FILESIZE PNUM SVR_ID --------------- -------- ------ ------ /incoming/rk.dbf 10493952 20 1 Rene Kundersma Oracle Technology Services, The Netherlands

    Read the article

  • unable to read/write CIFS mounts in Ubuntu 11.10

    - by Paul Collins
    upgraded my laptop from 11.04 too 11.10 and since then the CIFS mounts are not working before the upgrade it would allow mounts on host names, in 11.10 its only IP addresses (not much of an issue) however all the shares i mount are as Read only despite the FStab File declaring the options rw and auto, i have chowned the mount point to be nogroup.nouser and it still wont work, here is an extract from my FSTAB: //192.168.1.1/stories /home/paul/Documents/Stories cifs rw,user,exec,auto,username=,password= 0 0

    Read the article

  • Ubuntu 12.04 does not recognise CD

    - by Venkat Kotra
    ~$ wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'MATSHITA' 'DVD-RAM UJ8B1AS' ------------------------------------------------------------------------- But I don't find access to CD. Kindly let me know how to rip the CD. When I try to mount, it gives error. ~$ mount /dev/sg1 can't find /dev/sg1 in /etc/fstab or /etc/mtab

    Read the article

  • Ubuntu doesn't "see" external USB Hard Disk

    - by Mina Michael
    It's NTFS. It's USB2. I'm using Ubuntu 13.04. It works perfectly fine on Windows (which excludes cable and hardware problems). I have two Ubuntu computers and it's not detected on either. It's about 500 GB. Edits: Following the first link, I input sudo lsusb in a terminal; before and after connecting the HDD. The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. There it is! ("sata bridge" used to appear in a windows notification when I plugged in the HDD in!). ...This means that Ubuntu detects it but is it not mounting it? I tried this: sudo mount /dev/sdb1 /mnt But gives this: mount: special device /dev/sdb1 does not exist I also tried: sudo mount /dev/sdc1 /mnt but it stays with no output forever. I left it in background for about 30 min.s. sudo fdisk -l gives out this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa42d04a3 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 80325 102481919 51200797+ 7 HPFS/NTFS/exFAT /dev/sda3 263874558 312580095 24352769 5 Extended /dev/sda4 102481920 263872511 80695296 7 HPFS/NTFS/exFAT /dev/sda5 263874560 310505471 23315456 83 Linux /dev/sda6 310507520 312580095 1036288 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5822aaea Device Boot Start End Blocks Id System /dev/sdc1 2048 976769023 488383488 7 HPFS/NTFS/exFAT The part below "Partition table entries are not in disk order" takes about 5 minutes to appear. The outputs of ls /dev/ | grep sd before and after connecting the HDD: before: sda sda1 sda2 sda3 sda4 sda5 sda6 ,after: sda sda1 sda2 sda3 sda4 sda5 sda6 sdd sdd1 The second output has the lines sdd and sdd1 different from the first one. IT SHOWED THE FILES!! The command sudo mount /dev/sdd1 /mnt worked after I typed in sudo fdisk -l!!! Thanks a million!! :) :)

    Read the article

  • Mounting a network filesystem into schroot

    - by haggai_e
    Hi, I'm using a network file system (AFS) and I would like to also mount it into my schroot. Adding a line to /etc/schroot/mount-defaults, with bind or rbind in the options didn't help: schroot always mounts the directory with bind, and it remains empty in the chroot. My current solution is a script that remounts the /afs directory with rbind after the schroot has been set up. Is there a way to make schroot use rbind directly?

    Read the article

  • How to connect Nokia Lumia 520 to Ubuntu 12.04

    - by pavankumar
    I have done the following steps: sudo add-apt-repository ppa:langdalepl/gvfs-mtp sudo apt-get update and updated some packages from update manager. After doing above steps I am able to see lumia phone name in file system. But when I try to mount device I am getting following errors: Unable to mount RM-914|Nokia Lumia 520 Unable to open MTP device '[usb:001,010]' Is there any way to solve these problem?

    Read the article

  • What is the correct fstab entry for automounting a remote filesystem?

    - by user101815
    I'm running Kubuntu 13.10 and I'm trying to arrange for a remote filesystem to be automounted on startup. I have the following entry for it in fstab: hpmediavault:/shares/Volume1/FileShare /mnt/mediavault nfs auto,noatime,nolock,bg,nfsvers=3,intr,tcp,actimeo=1800 0 0 I can mount it perfectly well with sudo mount /mnt/mediavault But what does it take so that it will be mounted on startup with no explicit action on my part?

    Read the article

  • Linux: CIFS/Samba mount hangs for several minutes

    - by Pistos
    I have a small local network which has a Gentoo box and a Windows box. I mount a share originating on the Windows box onto the Gentoo box with a command like: mount -t cifs -o username=WindowsUsername,password=thepassword,uid=pistos //192.168.0.103/Users /mnt/windowsbox Most of the time, everything Just Works, and I can read and write without problems. However, every few weeks or so, the connection or the mount point seems to go dead or hang, such that any process that tries to access the mount point gets stuck in D state (disk, or I/O wait). These processes become impervious to TERM and KILL signals. Disconnecting and reconnecting the Windows box from the network does not help. The frozen state lasts for 5+ minutes. It's really frustrating and gets in the way of normal work, because it freezes Save As dialogues, ls commands, etc. If I issue a umount on the mount point, it either hangs also, or reports that the mount point is in use. Eventually, the dead state resolves itself, and the mount point gets unmounted, or it becomes possible to umount with no delay. My guess is that this happens when the connection/mount has gone idle, or when the Windows machine has been idle. I am not really sure. Why is this happening, and what can I do to prevent it? Or how can I successfully kill these D-state processes at will? Possibly related: CIFS mounts hang on read

    Read the article

  • Best way to mount 3-4 monitor like this?

    - by jasondavis
    I just purchased 2 HP 2009m widescreen monitors, they are not the biggest thing on the block, they are like 19-20" and are only around 150-200$ so I think they are perfect. I bought 2 of them just to make sure I like them, with the full intention of purchasing more to make either a tripple or quad display. I now I am stuck trying to decide, if I purchase 1 more to have a tripple display I would then like to just wrap the third monitor to either the rigth or left side, I could do this without a mount most likely pretty easy. If I decide to go with 2 more monitors to make a quad display then I would like to add the 2 new monitor directly above the 2 that I have now. So it would make a grid of 2 wide and 2 high. I have posted a few photos belwo to show them now with the 2 I have, you will notice that I have them tilted inwards to make more of a "V" shape instead of them being side by side and "STRAIGHT". Now if I decide to make thegrid of 4 then I will need to buy or build a stand to hold them all tightly together (no whitespace or gap between the grid of monitors) but I would like to still have both rows invert to make the slight "V". Do you know of any existing stands I could purchase that would hold all 4 monitors without making them be STARIGHT without the "V" shape? Any tips appreciated please, also they do have holes in the back for VESA. a few photos... (they are from iphone and lighting made them note very good but you can see what I am working with here)

    Read the article

  • Where is '/host' declared for mount in Wubi (Ubuntu 9.10)?

    - by Pedro
    Hi! I'm using Wubi (ubuntu 9.10), and I couldn't find where '/host' mountpoint is declared for mounting. There's no entry in fstab, but it's listed in /proc/mount and mounted at boot time. Any ideas? pedroel@ubuntu:~$ cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev tmpfs rw,relatime,mode=755 0 0 /dev/sda1 /host fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 /dev/loop0 / ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 none /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 none /var/run tmpfs rw,nosuid,relatime,mode=755 0 0 none /var/lock tmpfs rw,nosuid,nodev,noexec,relatime 0 0 none /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 /dev/loop1 /home/pedroel/Downloads ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 gvfs-fuse-daemon /home/pedroel/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/mapper/isw_efhafcifi_RAID_Volume01 /media/RAID_D fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 pedroel@ubuntu:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 /host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/pedro.disk /home/pedroel/Downloads ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/swap.disk none swap loop,sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks in advance, Pedro

    Read the article

  • Where is '/host' declared for mount in Wubi (Ubuntu 9.10)?

    - by Pedro
    I'm using Wubi (ubuntu 9.10), and I couldn't find where '/host' mountpoint is declared for mounting. There's no entry in fstab, but it's listed in /proc/mount and mounted at boot time. Any ideas? pedroel@ubuntu:~$ cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev tmpfs rw,relatime,mode=755 0 0 /dev/sda1 /host fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 /dev/loop0 / ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 none /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 none /var/run tmpfs rw,nosuid,relatime,mode=755 0 0 none /var/lock tmpfs rw,nosuid,nodev,noexec,relatime 0 0 none /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 /dev/loop1 /home/pedroel/Downloads ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 gvfs-fuse-daemon /home/pedroel/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/mapper/isw_efhafcifi_RAID_Volume01 /media/RAID_D fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 pedroel@ubuntu:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 /host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/pedro.disk /home/pedroel/Downloads ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/swap.disk none swap loop,sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks in advance, Pedro

    Read the article

  • How to automatically mount hibernated NTFS to read-only?

    - by Piotr
    Is there any way to set up Ubuntu this way: If I can't mount the filesystem in rw mode, then mount it in ro mode in the same directory. In result I should not come across the notification that the system can't mount the filesystem (Skip or manual fix notification). SO when I start the system I should have my ntfs partitions mounted either in rw or ro mode depends if the windows is hibernated. fstab entry: #/dev/sda7 UUID=D0B43178B43161E0 /media/Dane ntfs defaults,errors=remount-ro 0 1 "mount -a" result: The disk contains an unclean file system (0, 0). Metadata kept in Windows cache, refused to mount. Failed to mount '/dev/sda7': Operation not permitted The NTFS partition is in an unsafe state. Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the 'ro' mount option. I have ubuntu 13.10 and win8. I use uefi secure boot.

    Read the article

  • CD/DVD drive not mounted when inserted with Disc of any kind

    - by Cisco Sán
    I just noticed that if a insert a CD or a DVD of any kind, the Drive will start spinning but it will not show the mounted disc. Before it used to ask me what to do with the media inserted. Now it doesn't even do that. I ran in the terminal this code: eject -n and it displays this: " eject: device is `/dev/sr0'" what can I do to get the functionality back on my drive. also ran this command: sudo mount -o ro,unhide,uid=1000 /dev/cdrom /mnt/cdrom but in return i get this: " mount: mount point /mnt/cdrom does not exist" Running Ubuntu 11.10 HERE IS THE HISTORY UNTIL NOW thanks Waltinator: I ran the 'dmesg' but don't know what I'm looking for. Im a newbie on this. The same thing with the 'ls -rlt /var/log' command. Should I create the directory for the mount? at this point really don't know what to do. – Cisco Sán 7 hours ago Here are 3 lines from my dmesg after I successfully inserted a CD: [ 4804.416018] wlan0: no IPv6 routers present [ 8214.125450] ISdit ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8214.136556] ISO 9660 Extensions: RRIP_1991A The first line is a previous event, my wireless going online. The next 2 lines are a good result. The number in square brackets is "seconds since boot", the rest of the line is usually helpful. And no, you should NOT create the mount point. Let's try to get the automatic mounting to work. – waltinator 7 hours ago ok this are my last 3 lines on the 'dmesg' [ 18.130819] init: plymouth-stop pre-start process (1396) terminated with status 1 [ 28.780011] wlan0: no IPv6 routers present [ 505.632119] CE: hpet increased min_delta_ns to 20113 nsec – Cisco Sán 6 hours ago It looks like your CD/DVD drive is not connected to the data bus, and not causing an interrupt when you insert a platter. – waltinator 6 hours ago Try dmesg | grep -A8 CD-ROM which should show you what the system thought was available when it came up. – waltinator 6 hours ago here is my printout [0.774351] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T40N A100 PQ: 0 ANSI: 5 [0.778117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [0.778122] cdrom: Uniform CD-ROM driver Revision: 3.20 [0.778282] sr 0:0:0:0: Attached scsi CD-ROM sr0 [0.778340] sr 0:0:0:0: Attached scsi generic sg0 type 5 [0.780416] Freeing unused kernel memory: 984k freed [0.780732] Write protecting the kernel read-only data: 10240k [0.780986] Freeing unused kernel memory: 20k freed [0.786331] Freeing unused kernel memory: 1400k freed [0.804912] udevd[90]: starting version 173 [0.874178] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [0.874208] r8169 0000:02:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 OK, your system sees the drive. Can you open and close the tray with eject and eject -t? Run udevadm monitor while you insert a CD (type ^C when done) and see if you get "change" and "add" messages. – waltinator 6 hours ago ok, "eject" works perfectly "eject -t" does nothing. this is the message for "udevadm monitor": KERNEL[13771.009267] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0 (block) UDEV [13773.878887] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0 /block/sr0 (block) – Cisco Sán 6 hours ago sudo hwinfo --cdrom (the hwinfo package is installable through Software Center) describes my CD-ROM, try it. – waltinator 4 hours ago My read out from the "sudo hwinfo --cdrom" are the following: hal.1: read hal dataprocess 2753: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 22: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.247] Unique ID: KD9E.JgkxTS4hgl2 Parent ID: 3p2J.gdUMCD83e+E SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST DVD+-RW GSA-T40N" Vendor: "HL-DT-ST" Device: "DVD+-RW GSA-T40N" Revision: "A100" Driver: "ata_piix", "sr" Driver Modules: "ata_piix" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-id/ata-HL-DT-ST_DVD+_-RW_GSA-T40N_K048BJ74257, /dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw Device Number: block 11:0 (char 21:0) Features: DVD Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (IDE interface) Drive Speed: 31 Volume ID: "Movie" Publisher: "INTERVIDEO" Creation date: "20050424162207000" Thanks for the help. To Castro, hope this is what you meant and sorry for the comments..

    Read the article

  • Cannot mount one usb disc, although other mounts automatically after 12.10 upgrade

    - by Allen Williams
    Since upgrading to 12.10, switching on or attempting to mount one of my usb hard drives gives this error message: Error mounting system-managed device /dev/sdg1: Command-line `mount "/mnt/usb-ST350041_8AS_60CAFFFFFFFF-0:0-part1"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdg1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so dmesg | tail gives (inter alia): [ 1080.727830] sdg: sdg1 [ 1080.732003] sd 8:0:0:0: [sdg] Attached SCSI disk [ 1081.383633] FAT-fs (sdg1): Unrecognized mount option "x-gvfs-show" or missing value [ 1871.160973] sdg: sdg1 The drive cannot be mounted, but is recognized by the system as a "place". I am not a technical bod; I cannot take this further myself and any help would be much appreciated.

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >