Search Results

Search found 6018 results on 241 pages for 'terminal emulator'.

Page 140/241 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

• node-xmpp-bosh error on Ubuntu 11.10

  - by megueloby

  I am newbie in Linux word. I want to implement a bosh server. Because it is hard on Windows platform I decided to deploy it on a Ubuntu virtual machine via vmware. I made installation without problems. I followed the processes on this page. Now I want to test my bosh server with the command sudo bosh or sudo /etc/init.d/bosh start, after typing those I get on the terminal Starting bosh server after, nothing. I looked on the bosh.err file and I see exec: 2: /usr/local/lib/bosh/run-server.js: Permission denied I don? t know why this error with sudo. When I try ls -l /usr/local/lib/bosh/run-server.js it show -rw-r--r-- 1 root root 4889 2012-04-01 18:50 /usr/local/lib/bosh/run-server.js How can I make bosh start?

  Read the article

• GPU On-the-fly encoding of video through Logitech HD Webcam C510

  - by Ashfame

  Originally asked here but I edited that to move this question as a different one on suggestion by a fellow member. I read that I should have a Core2Duo 2.2Ghz for 720p but I have a 2.0Ghz one, would it be possible for me to first record it and then encode it after recording if my processor really start giving issue when doing on-the-fly encoding? I also have a ATI HD 4850 512MB card, if it can help in encoding on-the-fly or is there a chance that my graphics card alone can handle it and those specs were just for a system without a graphics card? I believe so. Also, I got no worries in dealing with console, if I have to do some of the things above in terminal. Other possible significant details: I have a dual screen setup 29" (1360X768) & 22" (1680X1050) which might be using some good power from GPU and I have 2GB DDR2 800Mhz RAM.

  Read the article

• convert video file to .ogg

  - by Levan

  I've been having trouble with this because I'm new to Linux: I would like to convert different video formats to ogv. I found some terminal commands like this: ffmpeg -i input.avi -acodec libvorbis -ac 1 -b 768k output.ogg The problem with these type of commands is that they are intended to change bit rate, fps, or even resolution. I would like to just change the file format without changing anything else about the video. I looked at the man pages for ffmpeg and found some useful info but I don't know how to space command-line options. Are there any easy ways to do this? In addition, is there a command to change the bit rate so that it doesn't go over a certain rate?

  Read the article

• Logitech M515 does not work after upgrade to 12.04

  - by user877329

  After upgrading to 12.04, my Logitech M515 does not work here is some output from the terminal: lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0411:002a BUFFALO INC. (formerly MelCo., Inc.) Bus 001 Device 004: ID 055d:3021 Samsung Electro-Mechanics Co. Bus 002 Device 002: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard Bus 004 Device 002: ID 0582:0074 Roland Corp. EDIROL UA-25 Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver dmesg | grep Logitech [ 30.470528] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-2/input2 The cursor does not move. Also the mouse was working in 11.10 and is working in Windows NT 5.1.2600.

  Read the article

• Network does not connect at boot

  - by Daniel Svozil

  I am on Ubuntu 12.04, fresh install. When I boot a machine, the boot screen says Connecting to network, later it is changed to something like Did not connect, trying for another 60s. However, the network does not connect at the boot. But I can then log in without a network connection, and if I start a network manager service manually from the terminal (sudo service network-manager start), the network is connected without any problems. Please, does anybody know where the problem could be? I don't want to wait more than two minutes every computer restart :-). I am new to Ubuntu (and also to upstart) so I am a bit lost. There is no /var/log/messages, in dmesg I found this record, though it may not be related: init: network-interface (eth1) pre-start process (492) terminated with status 1 init: network-interface (eth1) post-stop process (548) terminated with status 1 Thanks Daniel

  Read the article

• Setting APPMENU_DISPLAY_BOTH for gnome applications does not work on Ubuntu 12.04 LTS

  - by Jack'

  To start the application with the menu enabled in the application and the panel, the following command has to be used: APPMENU_DISPLAY_BOTH=1 appname I recently discovered that this only works for non-gnome applications on Ubuntu 12.04 LTS, i.e. if you replace appname with applications such as gnome-terminal, gedit, evince, empathy, evolution, rhythmbox, nautilus, etc. only global menus will be displayed. However, if you start, for example, gimp or inkscape by using APPMENU_DISPLAY_BOTH, both global and local menus will be shown. The questions is: why is APPMENU_DISPLAY_BOTH not taken into account when starting such gnome applications? P.S. I know how to disable global menus in order to get the local ones (UBUNTU_MENUPROXY trick, removing appmenu-gtk/qt packages, removing the indicator-appmenu, etc.) Thanks for the help!

  Read the article

• netflix on ubuntu 12.04

  - by tsi25

  So I have got Ubuntu 12.04 on a system 76 lemur ultra laptop. I installed netflix via terminal with the following chain of commands: sudo apt-get update sudo apt-add-repository ppa:ehoover/compholio sudo apt-get update sudo apt-get install netflix-desktop when it was finished installing, I clicked the icon and something came up asking if you want to install some dependent software, but wouldn't let me interact with the window - so I hit tab and worked my way through that. But my computer shutdown before I could fully install GECKO. Now I have the netflix icon, but when i click it or right click it nothing happens. I had tried uninstalling it with the following commands, sudo apt-add --purge remove netflix-desktop and then reinstalling it but there's no change. does anyone know what I can do to get netflix to run from here? or what I can do to start troubleshooting? I searched around on AskUbuntu but couldn't find any answers to this specific problem.

  Read the article

• Symbol of VPNanytime is not shown anymore after upgrading from Ubuntu 11.04 to 11.10

  - by Aufwind

  Usually when I start VPN anytime (by calling a certain url in firefox) in Ubuntu 11.10 I saw a little "green symbol with a yellow lock in front of it" for the VPN anytime client near the clock. If I wanted to quit the VPN connection I just clicked on this symbol and hit logout/quit. Today I upgraded to Ubuntu 11.10 and the VPN connection works here fine too. But the symbol near the clock is not shown anymore. Is this a bug or do I have to set this up manually? And is there a way to quit the client perhaps by terminal? Currently I just do a restart, when I want the vpn connection terminated and that's kind uncomfortable. :-) Thanks for any suggestions!

  Read the article

• Windows Embedded Compact 7

  - by Valter Minute

  This will be the official name of the new release of Windows CE. Windows Embedded Compact 7 is available as a public CTP and it already supports a wide range of CPUs and both the device emulator and VirtualPC emulated environments. So I’ll have to learn a new (and longer) name for my favorite OS… but I (and all my two readers!) will be able to test it as soon as the download from connect web site completes (I'm sorry for my readers, but you'll have to download it by yourselves). Here’s a link for the download (it's free but you’ll have to register on connect with a valid LiveId): https://connect.microsoft.com/windowsembeddedce Remember that this is still a beta (or “Community Technology Preview” if you speak marketing language) and so it’s better to not install it on your main development PC (or, at least, backup everything before installation) and that the features and performances you’ll get from this beta may not be the same ones of the final release of the OS. You can discover the new features of Windows Embedded Compact on the new “official” webpage on microsoft website: http://www.microsoft.com/windowsembedded/en-us/products/windowsce/compact7.mspx or on Olivier’s blog: http://blogs.msdn.com/b/obloch/archive/2010/06/01/windows-embedded-compact-7-announced-and-public-ctp-available.aspx I hope to be able to post some interesting content about Windows Embedded Compact 7 soon (and maybe be able to shorten it’s name in CE7 in my blog posts, when I'll ensure that both my readers are not worketing for Microsoft's marketing department …). Technorati Tags: "Windows Embedded Compact 7"

  Read the article

• I cant see my windows drive in ubuntu

  - by Shardul Dhande

  I'm n00ber than any n00b you ever seen, so bear with me... I just downloaded wubi and installed ubuntu 12.10 along with Windows 7 on the same HDD. Linux works fine, but doesnt show files from drive C (on which it is installed). I really need C as it contains all my files. I did df -h in the terminal. It does show the drive. /dev/sda2 577G 220G 358G 38% /host Now I tried to mount the drive sudo mount /dev/sda2 and got the response mount: /dev/sda2 already mounted or /host busy mount: according to mtab, /dev/sda2 is already mounted on /host I dont know what that means. The drive doesnt show up in HOME FOLDER. What am i supposed to do now?

  Read the article

• Problem installing LibreOffice; please help!

  - by EmmyS

  I followed the instructions for installing LibreOffice found here, which are basically the same instructions found all over askubuntu and the web in general. I followed the instructions (including removing OO first) for gnome; all that is in my Applications menu now is LibreOffice (OO used to have OpenOffice Spreadsheet, OpenOffice Presentation, etc.) When I open LibreOffice, I get the splash screen/menu, but all of the choices for creating new docs are greyed out. It also will not open any office/type files (no errors; they just don't open.) The terminal commands indicated that installation was successful, but obviously something is missing. I'm guessing I can just reinstall OO from the software center, but I'd really like to give LibreOffice a try, given the lack of ongoing development on OO. Can anyone help me out?

  Read the article

• What the different hardware temperatures listed in psensor, sensor viewer etc reffer to?

  - by cipricus

  I have installed psensor and see a list of temperatures, but listed as ”Temperature 1”, 2, 3 etc . I can only guess where the processor is: but who's who for sure? The same question stands for Sensors Viewer. I can also type sensors in Terminal but I get no more than that acpi -t gives Thermal 0: ok, 65.0 degrees C Thermal 1: ok, 37.9 degrees C Thermal 2: ok, 56.0 degrees C Thermal 3: active, 71.0 degrees C Considering psensor, I know for a fact that: - the temperature that varies most depending on the CPU use is Temp1 and it is one of the two highest - the other high temperature is Temp4 and it goes to the ceiling when using youtube/flash - Temp2 is very stable at a medium level of 50-60 degrees Celsius - Temp3 is by far the lowest and most imobile So, I guess Temp1 is the CPU temperature, and Temp4 is the GPU temperature. Temp2 and 3 must be the motherboard and the hdd. Does anybody know for sure?

  Read the article

• Installing drivers for an ATI 6950

  - by aj.esler

  Is there any way to get ubuntu to recognise an ATI 6950? I have tried installing the proprietary ATI drivers, but these do not seem to work properly. It seems to screw up the gnome desktop, and starts booting into terminal. I'm somewhat of a linux newbie, so not really sure whats going wrong. I don't want to game on ubuntu, I just want it to recognise my dual monitor setup rather than mirroring the monitors, so any driver that does this is fine by me. It seems like the open source ATI radeon drivers will not support the 6950/6970 for some time, at least until kernel 2.6.38 is released. The card is also flashed with the 6970 firmware, not sure if this is important. I am running a 64 bit version of ubuntu, I installed ubuntu server 10.10, then installed gnome-desktop.

  Read the article

• Cinnamon Settings blank after update

  - by Seth Balmore

  Using Ubuntu 12.04 with the cinnamon desktop, I installed the most recent updates and now when I open "System Settings" the entire window appears as a blank white screen. The headers for APPEARANCE, PREFERENCES, and HARDWARE are present, but the usual icons for *Background, *Hot Corners, *Printers, etc. are no longer visible. Some of these settings can still be altered via the terminal: cinnamon-settings backgrounds cinnamon-settings applets cinnamon-settings mouse and touchpad But other commands, such as cinnamon-settings hot corners are met with an error. This is obviously a problem with cinnamon, so I just want to bring it to attention and find out when they plan on fixing the bug. A workaround can be found on the web, but it seems way to risky to rely on.

  Read the article

• Unity Launcher and Menu Bar disappeared in 14.04

  - by Justice2497

  The menu bar and Unity launcher have disappeared in Ubuntu 14.04. Also cannot access the terminal via ctrl + alt + t. I have tried every solution for this issue that I can find, from re-installing untiy and compiz to resetting Unity and everything. I've gone into the compiz manager and reactived Unity. Nothing has worked. When trying to reset Unity, or do anything with it really, I get this message (process:6332): dconf-WARNING **: failed to commit changes to dconf: Could not connect: Connection refused EDIT: Installed 14.04 a day ago. The issue happened after a reboot. After installing virtual Box

  Read the article

• Installing drivers for an ATI 6950 in Ubuntu

  - by aj.esler

  Is there any way to get ubuntu to recognise an ATI 6950? I have tried installing the proprietary ATI drivers, but these do not seem to work properly. It seems to screw up the gnome desktop, and starts booting into terminal. I'm somewhat of a linux newbie, so not really sure whats going wrong. I don't want to game on ubuntu, I just want it to recognise my dual monitor setup rather than mirroring the monitors, so any driver that does this is fine by me. It seems like the open source ATI radeon drivers will not support the 6950/6970 for some time, at least until kernel 2.6.38 is released. The card is also flashed with the 6970 firmware, not sure if this is important. I am running a 64 bit version of ubuntu, I installed ubuntu server 10.10, then installed gnome-desktop.

  Read the article

• Toshiba satellite L500 no Wifi anymore!

  - by Benjamin Piller

  I have a Toshiba Satellite L500 with Ubuntu 12.04 and its wifi suddenly stopped working!! I've never seen like that before.. I tried also using external USB wifis but no success. I am not able to turn it on with the function keys nor using rfkill commands and similar WLAN manipulator Commands in the terminal! It was working before for at least 4-5 months!! The computer says it's turned off by hardware. I checked it and the Driver is fine. So why can i not use any Wifi on my computer?? Why it is suddenly disabled? I checked the BIOS too there is enabled the WLAN. I spent 10 hours for searching for solutions but i am out of ideas!!! Please Help!

  Read the article

• how to find available wireless networks

  - by Quinn

  I'm using an HP Pavilion dv6000 I've looked at other answers similar to this question how ever when I look at my network symbol it doesn't say anything that the answer below says "Make sure that your wifi hardware switch is on or not. It is either F2 or F12 or near to it. Once the switch is enabled, there is a small fan-like applet on the top panel (Gnome Network Manager), fourth from the right. Click on it and if there is no tick mark on the option 'Enable Wireless', enable it. Wait till your wifi connection name appears." it how says 'Enable Networking' my wi-fi switch is on and I've tried using terminal to kill the applet as another answer suggests trying. Does anyone have any other ideas that might help? Just in case anybodies curious as to how I'm posting this I'm on my other ubuntu laptop that's running an older version.

  Read the article

• Changes to 'resolveconf' discarded when connecting to a new network

  - by sudheer

  I have upgraded to 12.10 from 12.04 recently and I am having issues with connecting to the Internet. I got an IP address and am able to ping other LAN IPs in the local network but I am unable to connect to the Internet and am even unable to ping www.google.com from a terminal. Somehow making changes in /etc/resolv.conf and restarting resolvconf service and rebooting works but I need to do this every time I connect to a new network. How do I make these changes permanent? Can someone suggest a solution to this issue?

  Read the article

• Sound notification over SSH

  - by Lekensteyn

  I just switched from the Konversation IRC client to the terminal based IRSSI. I'm starting IRSSI on a remote machine using GNU screen + SSH. I do not get any sound notification on new messages, which means that I've to check out IRSSI once in a while for new messages. That's not really productive, so I'm looking for an application / script that plays a sound (preferably /usr/share/sounds/KDE-Im-Irc-Event.ogg and not the annoying beep) on my machine if there is any activity. It would be great if I can disable the notification for certain channels. Or, if that's not possible, some sort of notification via libnotify, thus making it available to GNOME and KDE.

  Read the article

• "./configure: command not found" error when trying to install the JRE

  - by user74670

  I was trying to install JRE on my 64-bit ubuntu 10.04 installation. Just to be sure that that is what I really want, I need to run a .jar file. I downloaded java from this link. Then I chose linux x64 and downloaded the tar file, I extracted it and tried to compile the source code but had the error. I don't know whether I downloaded the wrong file or I ran the wrong commands in the terminal After I changed directory using the cd command to the extracted directory, I tried ./configure but I got this error: ./configure: command not found I know that there is an easier way to install java but I just want to understand how to install an application from source in linux as it seems that I will face this problem in the future. Thanks in advance

  Read the article

• No root partition

  - by christian ashton

  I'm having serious problems trying to install ubuntu 14.04 on my Toshiba Satellite C850 laptop. Whenever I try to install it it says "No root file system found. Please correct this error from the partitioning menu." I've tried to create new partitions but I don't know what size to make them etc. can someone please help me on this? (Is there a way to create partitions through the terminal? I'm new to ubuntu) but i was on it 2 days ago, laptops crashed and now I can't get past the installation. I've created a new partitioning table just need guidance on which partitions to create and how big to make them. I have absolutely no partitions whatsoever on my hard drive (or whatever the partitions are part of) so it will need to be from the very start. Thanks in advance!

  Read the article

• Ripping MP3s in Rhythmbox Ubuntu 12.10 (64 bit)?

  - by James Fellows Yates

  I installed a couple of days ago Ubuntu 12.10 (64 bit). I today tried ripping a CD in the MP3 format. However, whenever I try to rip, it says it is missing an extra multimedia plugin "Gstreamer extra plug-ins (i386)". I then try to install the :i386 version of the gstreamer-ugly plugins, but then I get the same problem but with the id3-demuxer (or something similar) The Terminal output I get from both problems (but replace the "MPEG-1 Layer 3 (MP3) encoder" with the "ID3-demuxer" name) is: james@clefairy:~$ rhythmbox (rhythmbox:24122): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed Rhythmbox-Message: Missing plugin: gstreamer|0.10|rhythmbox|MPEG-1 Layer 3 (MP3) encoder|encoder-audio/mpeg, mpegversion=(int)1, layer=(int)3 /usr/lib/python2.7/dist-packages/gobject/constants.py:24: Warning: g_boxed_type_register_static: assertion `g_type_from_name (name) == 0' failed import gobject._gobject It doesn't help that each time I have to install/remove the entire Gstreamer-ugly collection each time - I can't find that specific file. The CD plays fine, it's the ripping plugin that doesn't seem to work. I didn't have this problem previously on 12.04 (64 bit).

  Read the article

• Steam, launching Team Fortress 2: libGL.so.1: wrong ELF class: ELFCLASS64

  - by stefanhgm

  After I got Steam running with the workaround mentioned here, I've got nearly the same problem when launching Team Fortress 2. After starting it from Steam the "Launcher" pops up and after a few seconds it disappears with the following error in the terminal: /home/user/Steam/SteamApps/steamuser/Team Fortress 2/hl2_linux: error while loading shared libraries: libGL.so.1: wrong ELF class: ELFCLASS64 Game removed: AppID 440 "Team Fortress 2", ProcID 5299 saving roaming config store to 'sharedconfig.vdf' roaming config store 2 saved successfully Because of the similarity with the workaround I used before, I tried to execute: export LD_LIBRARY_PATH=/usr/lib32:$LD_LIBRARY_PATH directly before launching the game, but there is no difference.

  Read the article

• No GUI, No internet connection, please help 12.04

  - by KB_

  I am new to Ubuntu and I tried to install ubuntu server 12.04 on my laptop. now my problem is - I am unable to connect to the internet (I have wifi ONLY connection). ubuntu didn't recognize my built-in wifi on my Toshiba Satellite L505. There is no GUI. I have Terminal only, I tried Sudo apt-get update but i am getting errer msg because of no connection. 1. I need to know if there is any possible way that i can download and install driver for my wifi. 2. what other option do i have to be able to update ubuntu. Thanks KB

  Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >