Search Results

Search found 20946 results on 838 pages for 'at command'.

Page 141/838 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• When trying to install Wine on 12.10, 'Sudo' command will not let me type in a password.

  - by Nocturnus

  As the title explains, I have been attempting to install Wine on my laptop which is running 12.10. When I access the command terminal and entered "sudo add-apt-repository ppa:ubuntu-wine/ppa" I was of course met by a password block, when I attempted to enter my password, it flat out wouldn't let me type anything, the only key that got a response from the terminal was "enter" which was met by "incorrect password". To bypass this issue I backed out and used the 'Gksudo' command, this new dialogue box seemed to give me access to sudo commands. I then entered "sudo apt-get update" and "sudo apt-get install wine1.5". Up until the installation everything went fine, but after entering the final command (still using gksudo) The terminal read "the following packages have unmet dependencies" and proceeded to list a bunch of "recommends" So my guess is that Wine hasn't been updated to run on 12.10... Is this true, and is there any other way to open .exe's? Also what was with that funky password misshap? I'm totally new to Ubuntu so I've just been using support pages and tutorials, sorry if I'm a bit naive in these matters...

  Read the article

• How do I execute a shell-command in background?

  - by Adobe

  Here's a simple defun to run a shell script: (defun bk-konsoles () "Calls: bk-konsoles.bash" (interactive) (shell-command (concat (expand-file-name "~/its/plts/goodies/bk-konsoles.bash ") (if (buffer-file-name) (file-name-directory (buffer-file-name))) " &") nil nil)) If I start a program with no ampersand - it start the script, but blocks emacs until I close the program, if I don't put ampersand it gives error: /home/boris/its/plts/goodies/bk-konsoles.bash /home/boris/scl/geekgeek/: exited abnormally with code 1. Edit: So now I'm using: (defun bk-konsoles () "Calls: bk-konsoles.bash" (interactive) (shell-command (concat (expand-file-name "~/its/plts/goodies/bk-konsoles.bash ") (if (buffer-file-name) (file-name-directory (buffer-file-name))) " & disown") nil nil) (kill-buffer "*Shell Command Output*")) Edit 2: Nope - doesn't work: (defun bk-konsoles () "Calls: bk-konsoles.bash" (interactive) (let ((curDir default-directory)) ;; (shell-command (concat "nohup " (expand-file-name "~/its/plts/goodies/bk-konsoles.bash ") curDir) nil nil) (shell-command (concat (expand-file-name "~/its/plts/goodies/bk-konsoles.bash ") curDir "& disown") nil nil) (kill-buffer "*Shell Command Output*"))) keeps emacs busy - either with disown, or nohup. Here's a script I'm running if it might be of help: bk-konsoles.bash

  Read the article

• How do you fix "failed command: IDENTIFY DEVICE" showing up in dmesg?

  - by Neil

  I just got a new Mushkin 60gb SSD, and it's now my primary drive in the ata1 spot. I've been getting these failed command: IDENTIFY DEVICE errors which are preventing rebooting and shutdown. Does anyone know what these could be caused by, or how to start troubleshooting? I've tried these kernels: 2.6.32-22-generic 2.6.31-17-generic And they both have the same error. Here is a link to my entire dmesg. And the relevant ata1.00 parts below: [ 59.804237] ata1: drained 256 bytes to clear DRQ. [ 59.804244] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 59.804249] ata1.00: failed command: IDENTIFY DEVICE [ 59.804254] ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/40 tag 0 pio 512 in [ 59.804256] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 59.804258] ata1.00: status: { DRDY } [ 59.804264] ata1: hard resetting link [ 59.804266] ata1: nv: skipping hardreset on occupied port [ 60.272036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 60.352193] ata1.00: configured for UDMA/133 [ 60.352204] ata1: EH complete

  Read the article

• How do I get Bison/YACC to not recognize a command until it parses the whole string?

  - by chucknelson

  I have some bison grammar: input: /* empty */ | input command ; command: builtin | external ; builtin: CD { printf("Changing to home directory...\n"); } | CD WORD printf("Changing to directroy %s\n", $2); } ; I'm wondering how I get Bison to not accept (YYACCEPT?) something as a command until it reads ALL of the input. So I can have all these rules below that use recursion or whatever to build things up, which either results in a valid command or something that's not going to work. One simple test I'm doing with the code above is just entering "cd mydir mydir". Bison parses CD and WORD and goes "hey! this is a command, put it to the top!". Then the next token it finds is just WORD, which has no rule, and then it reports an error. I want it to read the whole line and realize CD WORD WORD is not a rule, and then report an error. I think I'm missing something obvious and would greatly appreciate any help - thanks! Also - I've tried using input command NEWLINE or something similar, but it still pushes CD WORD to the top as a command and then parses the extra WORD separately.

  Read the article

• How granular should a command be in a CQ[R]S model?

  - by Aaronaught

  I'm considering a project to migrate part of our WCF-based SOA over to a service bus model (probably nServiceBus) and using some basic pub-sub to achieve Command-Query Separation. I'm not new to SOA, or even to service bus models, but I confess that until recently my concept of "separation" was limited to run-of-the-mill database mirroring and replication. Still, I'm attracted to the idea because it seems to provide all the benefits of an eventually-consistent system while sidestepping many of the obvious drawbacks (most notably the lack of proper transactional support). I've read a lot on the subject from Udi Dahan who is basically the guru on ESB architectures (at least in the Microsoft world), but one thing he says really puzzles me: As we get larger entities with more fields on them, we also get more actors working with those same entities, and the higher the likelihood that something will touch some attribute of them at any given time, increasing the number of concurrency conflicts. [...] A core element of CQRS is rethinking the design of the user interface to enable us to capture our users’ intent such that making a customer preferred is a different unit of work for the user than indicating that the customer has moved or that they’ve gotten married. Using an Excel-like UI for data changes doesn’t capture intent, as we saw above. -- Udi Dahan, Clarified CQRS From the perspective described in the quotation, it's hard to argue with that logic. But it seems to go against the grain with respect to SOAs. An SOA (and really services in general) are supposed to deal with coarse-grained messages so as to minimize network chatter - among many other benefits. I realize that network chatter is less of an issue when you've got highly-distributed systems with good message queuing and none of the baggage of RPC, but it doesn't seem wise to dismiss the issue entirely. Udi almost seems to be saying that every attribute change (i.e. field update) ought to be its own command, which is hard to imagine in the context of one user potentially updating hundreds or thousands of combined entities and attributes as it often is with a traditional web service. One batch update in SQL Server may take a fraction of a second given a good highly-parameterized query, table-valued parameter or bulk insert to a staging table; processing all of these updates one at a time is slow, slow, slow, and OLTP database hardware is the most expensive of all to scale up/out. Is there some way to reconcile these competing concerns? Am I thinking about it the wrong way? Does this problem have a well-known solution in the CQS/ESB world? If not, then how does one decide what the "right level" of granularity in a Command should be? Is there some "standard" one can use as a starting point - sort of like 3NF in databases - and only deviate when careful profiling suggests a potentially significant performance benefit? Or is this possibly one of those things that, despite several strong opinions being expressed by various experts, is really just a matter of opinion?

  Read the article

• using curl command to download file in parts from different interfaces and to run the commands simultaneously from a script

  - by jsjain007

  i wanted to download a file using curl command simultaneously in different parts using ip aliasing(virtual Ethernet ports) so what i did was pasted the commands in a text file and run but the problem as obvious since it is in a file the commands will be executed one by one so is there a way to run all those commands simultaneously. here is the command curl --interface eth0:0 --range 0,38010880 http://wdl.cache.ijinshan.com/wps/download/Linux/unstable/kingsoft-office_9.1.0.4244~a12p3_i386.deb -o kinsoft-office.part1 curl --interface eth0:1 --range 38010880 ,- http://wdl.cache.ijinshan.com/wps/download/Linux/unstable/kingsoft-office_9.1.0.4244~a12p3_i386.deb -o kinsoft-office.part2 cat kinsoft-office.part*>kinsoft-office can anyone help me to run these above 2 commands simultaneously from the script so as to increase download speed

  Read the article

• Is there an apt command to download a deb file to the current directory?

  - by Lekensteyn

  I am often interested in the installation triggers (postinst, postrm) or certain parts (/usr/share or /etc) of packages. Currently, I am running the next command to retrieve the source code: apt-get source [package-name] The downside is, this file is often much bigger than the binary package and does not reflect the installation tree. Right now, I am downloading the packages through http://packages.ubuntu.com/: Search for [package-name] Select the package Click on amd64/i386 for download Download the actual file This takes too long for me and as someone who really likes the shell, I would like to do something like the next (imaginary) command: apt-get get-deb-file [package-name] I could not find something like this in the apt-get manual page. The most close I found was the --download-only switch, but this puts the package in /var/cache/apt/archives (which requires root permissions) and not in the current directory.

  Read the article

• Access DB Transaction on insert or updating

  - by Raju Gujarati

  I am going to implement the database access layer of the Window application using C#. The database (.accdb) is located to the project files. When it comes to two notebooks (clients) connecting to one access database through switches, it throws DBConcurrency Exception Error. My target is to check the timestamp of the sql executed first and then run the sql . Would you please provide me some guidelines to achieve this ? The below is my code protected void btnTransaction_Click(object sender, EventArgs e) { string custID = txtID.Text; string CompName = txtCompany.Text; string contact = txtContact.Text; string city = txtCity.Text; string connString = ConfigurationManager.ConnectionStrings["CustomersDatabase"].ConnectionString; OleDbConnection connection = new OleDbConnection(connString); connection.Open(); OleDbCommand command = new OleDbCommand(); command.Connection = connection; OleDbTransaction transaction = connection.BeginTransaction(); command.Transaction = transaction; try { command.CommandText = "INSERT INTO Customers(CustomerID, CompanyName, ContactName, City, Country) VALUES(@CustomerID, @CompanyName, @ContactName, @City, @Country)"; command.CommandType = CommandType.Text; command.Parameters.AddWithValue("@CustomerID", custID); command.Parameters.AddWithValue("@CompanyName", CompName); command.Parameters.AddWithValue("@ContactName", contact); command.Parameters.AddWithValue("@City", city); command.ExecuteNonQuery(); command.CommandText = "UPDATE Customers SET ContactName = @ContactName2 WHERE CustomerID = @CustomerID2"; command.CommandType = CommandType.Text; command.Parameters.AddWithValue("@CustomerID2", custIDUpdate); command.Parameters.AddWithValue("@ContactName2", contactUpdate); command.ExecuteNonQuery(); adapter.Fill(table); GridView1.DataSource = table; GridView1.DataBind(); transaction.Commit(); lblMessage.Text = "Transaction successfully completed"; } catch (Exception ex) { transaction.Rollback(); lblMessage.Text = "Transaction is not completed"; } finally { connection.Close(); } }

  Read the article

• Is there an apt command to download a deb file from the repositories to the current directory?

  - by Lekensteyn

  I am often interested in the installation triggers (postinst, postrm) or certain parts of packages (like /usr/share and /etc). Currently, I am running the next command to retrieve the source code: apt-get source [package-name] The downside is, this file is often much bigger than the binary package and does not reflect the installation tree. Right now, I am downloading the packages through http://packages.ubuntu.com/: Search for [package-name] Select the package Click on amd64/i386 for download Download the actual file This takes too long for me and as someone who really likes the shell, I would like to do something like the next (imaginary) command: apt-get get-deb-file [package-name] I could not find something like this in the apt-get manual page. The most close I found was the --download-only switch, but this puts the package in /var/cache/apt/archives (which requires root permissions) and not in the current directory.

  Read the article

• Insert not working

  - by user1642318

  I've searched evreywhere and tried all suggestions but still no luck when running the following code. Note that some code is commented out. Thats just me trying different things. SqlConnection connection = new SqlConnection("Data Source=URB900-PC\SQLEXPRESS;Initial Catalog=usersSQL;Integrated Security=True"); string password = PasswordTextBox.Text; string email = EmailTextBox.Text; string firstname = FirstNameTextBox.Text; string lastname = SurnameTextBox.Text; //command.Parameters.AddWithValue("@UserName", username); //command.Parameters.AddWithValue("@Password", password); //command.Parameters.AddWithValue("@Email", email); //command.Parameters.AddWithValue("@FirstName", firstname); //command.Parameters.AddWithValue("@LastName", lastname); command.Parameters.Add("@UserName", SqlDbType.VarChar); command.Parameters["@UserName"].Value = username; command.Parameters.Add("@Password", SqlDbType.VarChar); command.Parameters["@Password"].Value = password; command.Parameters.Add("@Email", SqlDbType.VarChar); command.Parameters["@Email"].Value = email; command.Parameters.Add("@FirstName", SqlDbType.VarChar); command.Parameters["@FirstName"].Value = firstname; command.Parameters.Add("@LasttName", SqlDbType.VarChar); command.Parameters["@LasttName"].Value = lastname; SqlCommand command2 = new SqlCommand("INSERT INTO users (UserName, Password, UserEmail, FirstName, LastName)" + "values (@UserName, @Password, @Email, @FirstName, @LastName)", connection); connection.Open(); command2.ExecuteNonQuery(); //command2.ExecuteScalar(); connection.Close(); When I run this, fill in the textboxes and hit the button I get...... Must declare the scalar variable "@UserName". Any help would be greatly appreciated. Thanks.

  Read the article

• Fix Corrupted Ruby in Mac OS X Lion

  - by luckyb56

  I screwed up my ruby buy executing the command sudo easy_install pip> /usr/bin/ruby -e "$(/usr/bin/curl -fksSL https://raw.github.com/mxcl/homebrew/master/Library/Contributions/install_homebrew.rb)" It showed error: Couldn't find index page for '-e' (maybe misspelled?) No local packages or download links found for -e error: Could not find suitable distribution for Requirement.parse('-e') After that when I tried to install Brew by: /usr/bin/ruby -e "$(/usr/bin/curl -fksSL https://raw.github.com/mxcl/homebrew/master/Library/Contributions/install_homebrew.rb)" It shows error which I have no idea: /usr/bin/ruby: line 1: Searching: command not found /usr/bin/ruby: line 2: Best: command not found /usr/bin/ruby: line 3: Processing: command not found Usage: pip COMMAND [OPTIONS] pip: error: No command by the name pip 1.1 (maybe you meant "pip install 1.1") /usr/bin/ruby: line 5: Installing: command not found /usr/bin/ruby: line 6: Installing: command not found /usr/bin/ruby: line 8: Using: command not found /usr/bin/ruby: line 9: Processing: command not found /usr/bin/ruby: line 10: Finished: command not found /usr/bin/ruby: line 11: Searching: command not found /usr/bin/ruby: line 12: Reading: command not found /usr/bin/ruby: line 13: syntax error near unexpected token `(' /usr/bin/ruby: line 13: `Scanning index of all packages (this may take a while)' Can this be fixed?

  Read the article

• Why can't execute GRUB command on Debian Squeeze 2.6 with GRUB already installed?

  - by Mikalaj

  I installed Debian Squeeze 2.6 (on a recently bought server) with a software RAID1. During installation I installed GRUB loader (1.9 version). System boots OK with GRAB loader BUT right after authorization it cannot execute GRUB command (I want to copy the GRUB from the SDA to SDB). System warning right after GRUB command invocation looks as: root@servername:~# grub -bash: grub: command not found How it could be? (GRUB already installed and no any other OS was installed at all)

  Read the article

• Unix command to suspend a job while there is console activity?

  - by Joseph Turian

  I want to do a large disk transfer, which slows down responsiveness of my system. What I want is a Unix command that will only run the command after I have been idle at the console for a few minutes. And if I come back half way in, it will suspend the job. Until I walk away from my computer. Is there such a command, or software package?

  Read the article

• How to start "explorer" process using command line (Vista)?

  - by Amby

  Is there a way to start windows "explorer" process from command line? Because of some problem in my Vista OS, explorer process crashes frequently (i can not see TaskBar after that) but using the open windows i can access the cmd.exe ( ctrl+alt+delete does not work). If there could be a command to start "explorer" process again or to start the Task manager then that would help a lot. Thanks Edit: explorer command starts the explorer process, but alt+ctrl+del is still not working, any help?

  Read the article

• How can I assign the keyboard shortcut ?x to the command move to trash?

  - by Fra

  In the Finder in Leopard I used to have the command "move to trash" associated with the keyboard shortcut ?x which was very handy because you could input the command with one hand. Moreover on the keyboard x is near to c, s and a which are other shortcuts often used in Finder. Now in Lion the command "move to trash" is associated to ? ? but I don't like it. How can I assign the keyboard shortcut ?x to the command "move to trash"?

  Read the article

• How to solve "command not found" on Ubuntu bash shell?

  - by redcoder

  I am very new to Ubuntu, struggling to find the proper command to install Zend Server on my Ubuntu 9.10 Server. After downloading the ZF Server and extracting it, I try to run this command: install_zs.sh 5.3 This is the ls of the extracted ZF archive: install_zs.sh README upgrade_zs_php.sh zend.deb.repo zend.rpm.repo But it says command not found. Any idea?

  Read the article

• How can I use '{}' to redirect the output of a command run through find's -exec option?

  - by pkaeding

  I am trying to automate an svnadmin dump command for a backup script, and I want to do something like this: find /var/svn/* \( ! -name dir -prune \) -type d -exec svnadmin dump {} > {}.svn \; This seems to work, in that it looks through each svn repository in /var/svn, and runs svnadmin dump on it. However, the second {} in the exec command doesn't get substituted for the name of the directory being processed. It basically just results a single file named {}.svn. I suspect that this is because the shell interprets > to end the find command, and it tries redirecting stdout from that command to the file named {}.svn. Any ideas?

  Read the article

• How to execute a multiple line configure command using Mac OS X terminal?

  - by skiabox

  I am reading a nice article about upgrading php on mac os x mountain lion. At the Install part of the document the author says that the user must execute a multiple line configure command. What is the easiest way to do it, using mac os terminal? Thank you. PS : I have executed yesterday the configure command without the parameters. Can this action cause any problems with the re-execution of configure command (with parameters this time)?

  Read the article

• Started an application through SSH, command line now gone, what happens next?

  - by Chris Dutrow

  Context: This is a very basic question Using Putty and SSH for the first time to do some serious server setup and run into the situation where I have started a process that I do not want to stop. The process is the gunicorn WSGI HTTP Server (running on Centos 6.3). The command I used to start the process is (as per their Quick Start): gunicorn -w 4 myapp:app At this point in the work session, I have lost the command prompt. This must be such a non-issue that it doesn't even enter into an experienced user's consciousness. But unfortunately at my level of experience, I am left with several fundamental questions: Does the fact that I have lost the command prompt mean that the process is still running? How do I get back to the command prompt without killing the process? How do I come back and monitor the process later? How do I eventually kill the process? Any help is appreciated, thanks so much!

  Read the article

• Can I have a macro in Visual Studio 2005 call a DOS command and redirect the output to a file?

  - by Mark

  I'd like to have a macro in Visual Studio 2005 that calls a DOS command and redirects the output (stdout and stderr) to a file. Just calling the command and "" redirecting it will not capture stderr, so there are two parts to this: calling a DOS command capturing both stderr and stdout to a file during that call I'd then like to open this file in Visual Studio after the command completes. I'm new to Visual Studio 2005 macro writing, and VB/VBA, so that's the kind of help that I'm looking for. Thanks, Mark

  Read the article

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Silabs cp2102 driver problem

  - by Zxy

  I downloaded appropriate driver from its own site, unzipped it and then tried to install it. But: root@ghostrider:/home/zero/Downloads# tar xvf cp210x-3.1.0.tar.gz cp210x-3.1.0/ cp210x-3.1.0/COPYING cp210x-3.1.0/cp210x/ cp210x-3.1.0/cp210x-3.1.0.spec cp210x-3.1.0/cp210x/.rpmmacros cp210x-3.1.0/cp210x/configure cp210x-3.1.0/cp210x/cp210x.c cp210x-3.1.0/cp210x/cp210x.h cp210x-3.1.0/cp210x/cp210xuniversal.c cp210x-3.1.0/cp210x/cp210xuniversal.h cp210x-3.1.0/cp210x/installmod cp210x-3.1.0/cp210x/Makefile24 cp210x-3.1.0/cp210x/Makefile26 cp210x-3.1.0/cp210x/rpmmacros24 cp210x-3.1.0/cp210x/rpmmacros26 cp210x-3.1.0/cp210x/Rules.make cp210x-3.1.0/INSTALL cp210x-3.1.0/makerpm cp210x-3.1.0/PACKAGE-LIST cp210x-3.1.0/README cp210x-3.1.0/RELEASE-NOTES cp210x-3.1.0/REPORTING-BUGS cp210x-3.1.0/rpm/ cp210x-3.1.0/rpm/brp-java-repack-jars cp210x-3.1.0/rpm/brp-python-bytecompile cp210x-3.1.0/rpm/check-rpaths cp210x-3.1.0/rpm/check-rpaths-worker root@ghostrider:/home/zero/Downloads# cd cp210x-3.1.0 root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# ls COPYING cp210x-3.1.0.spec makerpm README REPORTING-BUGS cp210x INSTALL PACKAGE-LIST RELEASE-NOTES rpm root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# run ./makerpm No command 'run' found, did you mean: Command 'zrun' from package 'moreutils' (universe) Command 'runq' from package 'exim4-daemon-heavy' (main) Command 'runq' from package 'exim4-daemon-light' (main) Command 'runq' from package 'sendmail-bin' (universe) Command 'grun' from package 'grun' (universe) Command 'qrun' from package 'torque-client' (universe) Command 'qrun' from package 'torque-client-x11' (universe) Command 'lrun' from package 'lustre-utils' (universe) Command 'rn' from package 'trn' (multiverse) Command 'rn' from package 'trn4' (multiverse) Command 'rup' from package 'rstat-client' (universe) Command 'srun' from package 'slurm-llnl' (universe) run: command not found root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# sudo ./makerpm + uname -r + kernel_release=3.2.0-25-generic-pae + pwd + current_dir=/home/zero/Downloads/cp210x-3.1.0 + export current_dir + uname -r + KVER=3.2.0-25-generic-pae + echo 3.2.0-25-generic-pae + awk -F . -- { print $1 } + KVER1=3 + echo 3.2.0-25-generic-pae + awk -F . -- { print $2 } + KVER2=2 + sed -e s/3\.2\.//g + echo 3.2.0-25-generic-pae + KVER3=0-25-generic-pae + [ -f /root/.rpmmacros ] + echo 2 2 + [ 2 == 4 ] ./makerpm: 25: [: 2: unexpected operator + echo 0-25-generic-pae 0-25-generic-pae + [ 0-25-generic-pae -gt 15 ] ./makerpm: 29: [: Illegal number: 0-25-generic-pae + cp /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros24 /root/.rpmmacros + d=/var/tmp/silabs + [ ! -d /var/tmp/silabs ] + mkdir /var/tmp/silabs + cd /var/tmp/silabs + r=/var/tmp/silabs/rpmbuild + o=cp210x-3.1.0 + s=/var/tmp/silabs/rpmbuild/SOURCES + spec=cp210x-3.1.0.spec + rm -rf /var/tmp/silabs/rpmbuild + mkdir rpmbuild + mkdir rpmbuild/SOURCES + mkdir rpmbuild/SRPMS + mkdir rpmbuild/SPECS + mkdir rpmbuild/BUILD + mkdir rpmbuild/RPMS + cd /var/tmp/silabs/rpmbuild/SOURCES + rm -rf cp210x-3.1.0 + mkdir cp210x-3.1.0 + cp -r /home/zero/Downloads/cp210x-3.1.0/cp210x/Makefile24 /home/zero/Downloads/cp210x-3.1.0/cp210x/Makefile26 /home/zero/Downloads/cp210x- 3.1.0/cp210x/Rules.make /home/zero/Downloads/cp210x-3.1.0/cp210x/configure /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210x.c /home/zero/Downloads/cp210x- 3.1.0/cp210x/cp210x.h /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210xuniversal.c /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210xuniversal.h /home/zero/Downloads/cp210x- 3.1.0/cp210x/installmod /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros24 /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros26 cp210x-3.1.0 + echo 2 2 + [ 2 == 4 ] ./makerpm: 64: [: 2: unexpected operator + echo 0-25-generic-pae 0-25-generic-pae + [ 0-25-generic-pae -gt 15 ] ./makerpm: 68: [: Illegal number: 0-25-generic-pae + cp /home/zero/Downloads/cp210x-3.1.0/cp210x/.rpmmacros24 cp210x-3.1.0/.rpmmacros cp: cannot stat `/home/zero/Downloads/cp210x-3.1.0/cp210x/.rpmmacros24': No such file or directory + MyCopy=0 + rm -f cp210x-3.1.0.tar + rm -f cp210x-3.1.0.tar.gz + tar -cf cp210x-3.1.0.tar cp210x-3.1.0 + gzip cp210x-3.1.0.tar + cp /home/zero/Downloads/cp210x-3.1.0/cp210x-3.1.0.spec /var/tmp/silabs/rpmbuild/SPECS + rpmbuild -ba /var/tmp/silabs/rpmbuild/SPECS/cp210x-3.1.0.spec ./makerpm: 121: ./makerpm: rpmbuild: not found + [ -f /root/.rpmmacros.cp210x ] How may I solve my problem? Thanks

  Read the article

• Silverlight Relay Commands

  - by George Evjen

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} I am fairly new at Silverlight development and I usually have an issue that needs research every day. Which I enjoy, since I like the idea of going into a day knowing that I am  going to learn something new. The issue that I am currently working on centers around relay commands. I have a pretty good handle on Relay Commands and how we use them within our applications. <Button Command="{Binding ButtonCommand}" CommandParameter="NewRecruit" Content="New Recruit" /> Here in our xaml we have a button. The button has a Command and a CommandParameter. The command binds to the ButtonCommand that we have in our ViewModel RelayCommand _buttonCommand;         /// <summary>         /// Gets the button command.         /// </summary>         /// <value>The button command.</value>         public RelayCommand ButtonCommand         {             get             {                 if (_buttonCommand == null)                 {                     _buttonCommand = new RelayCommand(                         x => x != null && x.ToString().Length > 0 && CheckCommandAvailable(x.ToString()),                         x => ExecuteCommand(x.ToString()));                 }                 return _buttonCommand;             }         }   In our relay command we then do some checks with a lambda expression. We check if the command  parameter is null, is the length greater than 0 and we have a CheckCommandAvailable method that will tell  us if the button is even enabled. After we check on these three items we then pass the command parameter to an action method. This is all pretty straight forward, the issue that we solved a few days ago centered around having a control that needed to use a Relay Command and this control was a nested control and was using a different DataContext. The example below illustrates how we handled this scenario. In our xaml usercontrol we had to set a name to this control. <Controls3:RadTileViewItem x:Class="RecruitStatusTileView"     xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:d="http://schemas.microsoft.com/expression/blend/2008"     xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"      xmlns:Controls1="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls"      xmlns:Controls2="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Input"      xmlns:Controls3="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation"      mc:Ignorable="d" d:DesignHeight="400" d:DesignWidth="800" Header="{Binding Title,Mode=TwoWay}" MinimizedHeight="100"                             x:Name="StatusView"> Here we are using a telerik RadTileViewItem. We set the name of this control to “StatusView”. In our button control we set our command parameters and commands different than the example above. <HyperlinkButton Content="{Binding BigBoardButtonText, Mode=TwoWay}" CommandParameter="{Binding 'Position.PositionName'}" Command="{Binding ElementName=StatusView, Path=DataContext.BigBoardCommand, Mode=TwoWay}" /> This hyperlink button lives in a ListBox control and this listbox has an ItemSource of PositionSelectors. The Command Parameter is binding to the Position.Position property of that PositionSelectors object. This again is pretty straight forward again. What gets a bit tricky is the Command property in the hyperlink. It is binding to the element name we created in the user control (StatusView) Because this hyperlink is in a listbox and is in the item template it doesn’t have a direct handle on the DataContext that the RadTileViewItem has so we have to make sure it does. We do that by binding to the element name of status view then set the path to DataContext.BigBoardCommand. BigBoardCommand is the name of the RelayCommand in the view model. private RelayCommand _bigBoardCommand = null;         /// <summary>         /// Gets the big board command.         /// </summary>         /// <value>The big board command.</value>         public RelayCommand BigBoardCommand         {             get             {                 if (_bigBoardCommand == null)                 {                     _bigBoardCommand = new RelayCommand(x => true, x => AddToBigBoard(x.ToString()));                 }                 return _bigBoardCommand;             }         } From there we check for true again and then call the action and pass in the parameter that we had as the command parameter. What we are working on now is a bit trickier than this second example. In the above example we are only creating this TileViewItem with this name “StatusView” once. In another part of our application we are generating multiple TileViewItems, so we cannot set the name in the control as we cant have multiple controls with the same name. When we run the application we get an error that reads that the value is out of expected range. My searching has led me to think we cannot have multiple controls with the same name. This is today’s problem and Ill post the solution to this once it is found.

  Read the article

• Parallelize incremental processing in Tabular #ssas #tabular

  - by Marco Russo (SQLBI)

  I recently came in a problem trying to improve the parallelism of Tabular processing. As you know, multiple tables can be processed in parallel, whereas the processing of several partitions within the same table cannot be parallelized. When you perform an incremental update by adding only new rows to existing table, what you really do is adding rows to a partition, so adding rows to many tables means adding rows to several partitions. The particular condition you have in this case is that every partition in which you add rows belongs to a different table. Adding rows implies using the ProcessAdd command; its QueryBinding parameter specifies a SQL syntax to read new rows, otherwise the original query specified for the partition will be used, and it could generate duplicated data if you don’t have a dynamic behavior on the SQL side. If you create the required XMLA code manually, you will find that the QueryBinding node that should be part of the ProcessAdd command has to be moved out from ProcessAdd in case you are using a Batch command with more than one Process command (which is the reason why you want to use a single batch: run multiple process operations in parallel!). If you use AMO (Analysis Management Objects) you will find that this combination is not supported, even if you don’t have a syntax error compiling the code, but you might obtain this error at execution time: The syntax for the 'Process' command is incorrect. The 'Bindings' keyword cannot appear under a 'Process' command if the 'Process' command is a part of a 'Batch' command and there are more than one 'Process' commands in the 'Batch' or the 'Batch' command contains any out of line related information. In this case, the 'Bindings' keyword should be a part of the 'Batch' command only. If this is happening to you, the best solution I’ve found is manipulating the XMLA code generated by AMO moving the Binding nodes in the right place. A more detailed description of the issue and the code required to send a correct XMLA batch to Analysis Services is available in my article Parallelize ProcessAdd with AMO. By the way, the same technique (and code) can be used also if you have the same problem in a Multidimensional model.

  Read the article

• How would I batch rename a lot of files using command-line?

  - by Whisperity

  I have a problem which I am unable to solve: I need to rename a great dump of files using patterns. I tried using this, but I always get an error. I have a folder, inside with a lot of files. Running ls -1 | wc -l, it returns that I have like 160000 files inside. The problem is, that I wish to move these files to a Windows system, but most of them have characters like : and ? in them, which makes the file unaccessible on said Windows-based systems. (As a "do not solve but deal with" method, I tried booting up a LiveCD on the Windows system and moving the files using the live OS. Under that Ubuntu, the files were readable and writable on the mounted NTFS partition, but when I booted back on Windows, it showed that the file is there but Windows was unable to access it in any fashion: rename, delete or open.) I tried running rename 's/\:/_' * inside the folder, but I got Argument list too long error. Some search revealed that it happens because I have so many files, and then I arrived here. The problem is that I don't know how to alter the command to suit my needs, as I always end up having various errors like Trying find -name '*:*' | xargs rename : _, it gives xargs: unmatched single quote; by default quotes are special to xargs unless you use the -0 option [\n] syntax error at (eval 1) line 1, near ":" [\n] xargs: rename: exited with status 255; aborting Adding the -0 after xargs turns the error message to xargs: argument line too long These files are archive files generated by various PHP scripts. The best solution would be having a chance to rename them before they are moved to Windows, but if there is no way to do it, we might have a way to rename the files while they are moved to Windows. I use samba and proftpd to move the files. Unfortunately, graphical software are out of the question as the server containing the files is what it is, a server, with only command-line interface.

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >