Search Results

Search found 13434 results on 538 pages for 'boot on power up'.

Page 141/538 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• IBM Bladecentre H Bootup Sequence Control

  - by Spence

  I have a bladecentre with blades, network and a SAN in a single rack. What I'd like to do is control the startup of the bladecentre so that when the rack is powered on that the blades will delay their bootup until the SAN is powered on correctly. Is this even possible? We have an AMM in the chassis if that helps. Basically we are looking into the reboot that occurs after power is restored to a UPS. I sincerely apologise for the noobness of this question, but I am a software guy trying to help :)

  Read the article

• IBM Bladecentre H Bootup

  - by Spence

  I have a bladecentre with blades, network and a SAN in a single rack. What I'd like to do is control the startup of the bladecentre so that when the rack is powered on that the blades will delay their bootup until the SAN is powered on correctly. Is this even possible? We have an AMM in the chassis if that helps. Basically we are looking into the reboot that occurs after power is restored to a UPS. I sincerely apologise for the noobness of this question, but I am a software guy trying to help :)

  Read the article

• Can I replace a broken PSU with one of a smaller size?

  - by Carson Myers

  I have a broken OEM power supply unit that is cooked. I'm browsing online to find a replacement and am happy to see that they don't cost too much -- the only thing is they all seem to have varying sizes. Is it a problem if I get a PSU that is smaller than the original one? This is going in an HP Pavillion a000, it's about five and a half years old -- I don't know if that means anything, I just thought there might be some recent standardized dimensions for PSUs or something. No idea.

  Read the article

• Drawbacks of installing linux on usb stick?

  - by Znarkus

  I am setting up a router/nas/http/whatever server based on an ION mini-ITX board. I've installed Ubuntu Server on an old 160 GB drive, but it generates a lot more heat and vibrates more than my other new drive (storage). It just doesn't fit the concept, and worse: it takes up a SATA port. As SSD's are crazy expensive I'm thinking of buying an extra 4 GB USB stick, and raid0 it. From my point of view, these are the pros/cons: Pros Low power consumption No vibrations No heat Smaller Get to buy new, larger USB stick (:D) Cons Shorter life time Slower Raid 0 More work maintaing/installing? I think the pros overweighs the cons. Shorter life time and raid 0 is countered by regular backups of the configs/settings. Slower is partially countered by raid 0, and I don't know about the last one. What do You think? Experience? Another solution?

  Read the article

• Motherboard/PSU crippling USB and Sata

  - by celebdor

  I very recently bought a new desktop computer. The motherboard is: Z77MX-D3H and the power supply is ocz zs series 550w. The issue I have is that once I boot to the operating system (I have tried with fedora and Ubuntu with kernels 2.6.38 - 3.4.0), my hard drive (2.5" Magnetic) occasionally makes a power switch noise and it resets. Needless to say, when this drive is the OS drive, the OS crashes. I also have a SSD that works fine with the same OS configurations, but if I have the magnetic hard drive attached as second drive, it works erratically and the reconnects result in corrupted data. I also noticed that whenever I plug an external hard drive USB2.0 or USB3.0 to the computer the issue with the reconnects is even worse: [ 52.198441] sd 7:0:0:0: [sdc] Spinning up disk... [ 57.955811] usb 4-3: USB disconnect, device number 3 [ 58.023687] .ready [ 58.023914] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.023919] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.023932] sd 7:0:0:0: [sdc] Sense not available. [ 58.024061] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024063] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024064] sd 7:0:0:0: [sdc] Sense not available. [ 58.024099] sd 7:0:0:0: [sdc] Write Protect is off [ 58.024101] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 58.024135] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024137] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024400] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.024402] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024405] sd 7:0:0:0: [sdc] Sense not available. [ 58.024448] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024450] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024451] sd 7:0:0:0: [sdc] Sense not available. [ 58.024469] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024471] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024472] sd 7:0:0:0: [sdc] Attached SCSI disk [ 58.407725] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 58.424921] scsi8 : usb-storage 4-3:1.0 [ 59.424185] scsi 8:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 59.424406] scsi 8:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 59.425098] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 59.425176] ses 8:0:0:1: Attached Enclosure device [ 59.425248] ses 8:0:0:1: Attached scsi generic sg3 type 13 [ 61.845836] sd 8:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 61.845838] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 61.846336] sd 8:0:0:0: [sdc] Write Protect is off [ 61.846338] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 61.846718] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.846720] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.848105] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.848106] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.857147] sdc: sdc1 [ 61.858915] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.858916] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.858918] sd 8:0:0:0: [sdc] Attached SCSI disk [ 69.875809] usb 4-3: USB disconnect, device number 4 [ 70.275816] usb 4-3: new SuperSpeed USB device number 5 using xhci_hcd [ 70.293063] scsi9 : usb-storage 4-3:1.0 [ 71.292257] scsi 9:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 71.292505] scsi 9:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 71.293527] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 71.293668] ses 9:0:0:1: Attached Enclosure device [ 71.293758] ses 9:0:0:1: Attached scsi generic sg3 type 13 [ 73.323804] usb 4-3: USB disconnect, device number 5 [ 101.868078] ses 9:0:0:1: Device offlined - not ready after error recovery [ 101.868124] ses 9:0:0:1: Failed to get diagnostic page 0x50000 [ 101.868131] ses 9:0:0:1: Failed to bind enclosure -19 [ 101.868288] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868292] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868296] sd 9:0:0:0: [sdc] Sense not available. [ 101.868428] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868434] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868439] sd 9:0:0:0: [sdc] Sense not available. [ 101.868468] sd 9:0:0:0: [sdc] Write Protect is off [ 101.868473] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 101.868580] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868584] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868845] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868849] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868854] sd 9:0:0:0: [sdc] Sense not available. [ 101.868894] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868898] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868903] sd 9:0:0:0: [sdc] Sense not available. [ 101.868961] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868966] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868969] sd 9:0:0:0: [sdc] Attached SCSI disk Now, if I plug the same drive to the powered usb 2.0 hub of my monitor, the issue is not reproduced (at least on a 20h long operation). Also the issue of the usb reconnects is less frequent if the hard drive is plugged before I switch on the computer. Does anybody have some advice as to what I could do? Which is the faulty part/s that I should replace? As for me, I really don't know if to point my finger to the PSU or the Motherboard (I have updated to the latest firmware and checked the BIOS settings several times). EDIT: The reconnects are happening both in the Sata connected drives and the USBX connected drives.

  Read the article

• Hot video card in server

  - by DougN

  Not sure if this belongs here or Superuser (I looked at Superuser -- suspect there are more hardware gurus here). I have a server that sits in a cabinet. It's connected to a small screen that is normally off. However, the video card is running at about 210 F all the time. The rest of the PC is pretty cool (getting temps from SpeedFan). Any thoughts on a way to quiet/calm/cool the video card since it's never really doing anything anyway? I'm usually logged out on the server, and no screen saver defined. Windows is already set to turn off the screen for power saving at 5 minutes.

  Read the article

• Non-USB powered laptop cooling pad?

  - by Andrei Rinea

  On my laptop (el-cheapo but pretty good) I have all my 3 USB ports occupied by devices in use (external mouse, external keyboard, 3G internet/flash drive/external hard drive/etc). I want a cooling pad for my hard-worked laptop but all seem to be powered by USB... This laptop is mainly stationary. Either is available a solution to power the USB-powered cooling pad other than connecting it to the laptop... ... either is there a non-USB powered laptop cooling pad?

  Read the article

• Juniper J4350 out of order

  - by Benjamin Baron

  I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

  Read the article

• USB port not recognising mouse on first bootup

  - by Pacifika

  On a computer here when first powered on the USB wired mouse is not recognised. The light under the mouse is not lit up. Other usb hub's and keyboards work fine. Disconnecting it and reconnecting it fixes the issue, even after a restart - after the pc is switched off for a length of time (for example overnight) the problem reappears. I swapped the mouse, updated the bios and installed updated intellimouse drivers, turned of power saving on the usb ports. Any ideas?

  Read the article

• Delay before booting with laptop

  - by Priednis

  I have almost the same problem as in Delay before booting? My computer is a practically new (couple months) Lenovo X200 Tablet (System Model 7449FXG). So when I press the power button, the indicator light that means "computer is on" turns on, but nothing else happens for about 5 mins, after that the computer starts booting normally. The same happens also on restart. And no USB or any other device for that matter is plugged in to the computer. And at the delay time the monitor is blank - actually not on at all.

  Read the article

• Computer cables explained

  - by Robert English

  I've noticed lately that places to learn about both power supply cables and also peripherals and fans aren't that easy to find. There's very little information available that gives detailed explanations of what cables are used inside a computer. What I found was very dated and often lacked detailed explanations. For someone planning out their first build it would be great way for this to be explained all in one place, like here! Important things to know about cables and connections in a computer? What are their names? Where do they connect to and why? What typical Voltages do they output? Changing Voltages for Overclocking? Please refernce PSU cables(Full modular, Modular and Non-Modular,24-pin, 20+4-pin etc), SATA(I, II, III), Molex etc. EDIT: Forgot to mention any information about PSU rails would also be appreciated :)

  Read the article

• Options for connecting an external disk to an old laptop

  - by agnul

  I've tried connecting a 2.5" external drive to an old laptop which has only USB 1. The LED on the disk lights up, but the disk doesn't seem to spin up. Since the same disk works fine on a newer laptop my guess is that the old one doesn't output enough power on the USB port. Besides looking for an external drive with its own PSU, what would you suggest? Will one of those USB cables with two connectors work? What about a powered USB hub?

  Read the article

• Macbook Pro + Windows 7 (bootcamp) = Terrible battery life

  - by Scott Beeson

  I recently put Windows 7 Ultimate x64 on my wife's Macbook pro because of some software she bought for her business. Since then, the battery life has been abysmal. I've identified and researched one of the problems, which is display brightness. There is no brightness control in the windows power options, but I did manually turn it down in Bootcamp. However, it is still reporting very low battery life estimates. I'm wondering if this is because Windows thinks the display is at full brightness. Can anyone shed any light on this? (Pun intended). Also, are there any other things to look out for that may improve the battery life? (I mean in the context of Mac + Windows, not in general)

  Read the article

• How to step down voltage from 208V to 110V

  - by Eric Dennis

  I have some racks that will be fed by 208V/20A circuits. These circuits will be conditioned and battery-backed by the facility in which these racks will live. 99% of the devices in the rack will be able to support 208V input, so I plan to use these PDUs. However, there may be one or two odd devices that will need 110V input. I know that I can use a step-down transformer to provide 110V for these devices, but that seems like overkill for such a small number of devices, plus I don't want to pay extra for the UPS functionality since my power will already be battery-backed. Any suggestions for something I can use for these one-off 110V devices?

  Read the article

• How can I shut down all my Virtual Machines when my UPS kicks in?

  - by Tim

  I have a Dell T610 running ESXi4, an APC Smart UPS 1000VA and a local "console" machine running Vista and the vSphere 4 Essentials pack. A dedicated management network is in place between the T610 and the Vista machine. We have 4 VMs: SBS 2003, Server 2003 running Terminal Services, and two XP Machines. Ideally, when the UPS is forced to use battery power [for a set number minutes], I would like to gracefully shutdown all the VMs, then the ESXi, then the console machine. The latter two are not strictly a priority, but the VMs within ESXi are. Google provided lots of deprecated scripts that used to work on ESXi 3.x or similar, however I am unable to find what they were deprecated by. What do I need to be able to do this? I have Powerchute Express as supplied with the UPS, but would be willing to pay for software if required.

  Read the article

• Why doesn't my laptop battery charge while the laptop is in use?

  - by larryb82

  Up until a week ago, my laptop has always been able to charge the battery while I'm using it. Now, it will not charge unless the computer is sleeping, hibernating, or turned off. The icon in the start tray states that the battery is charging but it is not animated (it used to be) and of course the power level does not increase. Otherwise, the battery seems to be fine. The battery life is decent (2h+) and while the laptop is in use and plugged in the battery will maintain a constant charge. Any troubleshooting help would be great (i.e. is this a charger issue, battery issues, software issue, etc...)

  Read the article

• PC powers up but there is no display

  - by Matthew

  I built a computer with standard components I bought from Newegg about three years ago. It ran great for 2 years and has sat powered down for the last year. I tried to power it up today and the display was blank. It powers up, lights come on, drives start spinning but there is nothing on the display. I verified that the monitor and video adapter work. I also tried the video adapter in a different slot on the mother board with no luck. What's the next thing I should try? Is the mother board shot? Thanks.

  Read the article

• Ubuntu 11.04 hangs at "checking battery state" while booting

  - by MisterSir

  When I try to boot Ubuntu 11.04, it just hangs when it gets to checking battery state. I know this issue is usually related to graphic drivers, but it worked like a charm for months now. Last time I was on Ubuntu I updated my system with the update manager, so maybe an update caused it. Anyway, I really need Ubuntu. I'm in the middle of work on a website and I have a deadline, so I need some help over here. Thanks. p.s. I tried reinstalling gnome-power-manager. Didn't work. And I'm not on a laptop.

  Read the article

• How to determine the source for wakeup in hibernate

  - by Erik

  I have a big problem with my home theater PC that runs Windows 7 64Bit. Normally, I send that PC to hibernate every evening, but from time to time, it keeps waking up for no obvious reason, and stays on until I realize, which is sometimes half a day later :( I have already checked for Windows update, which is not set to automatical, since I prefer installing updates manually. When I look in the system event log, there is an entry called "Power Troubleshooter" which tells me that my system was reactivated at a specific time, but it also says: Source = Unknown, which is the most annoying part. So how can I actually figure out, which process reactivates the PC? Is it possible to set a group policy which forbidds applications or services from scheduling tasks that allow waking up from hibernate at all?

  Read the article

• How can I disable the beep when I plug in/unplug my laptop's AC adapter?

  - by Dunaril

  My Packard-Bell laptop is emitting a loud, annoying beep when I connect or disconnect it to/from an AC power source. Whether I have headphones plugged in or not does not change anything; the sound goes out of the speakers and wakes everyone up. Do you know of any ways to eliminate this sound? I searched around the Internet and found a solution involving setting a specific volume bar to 0 in the playback settings, but I did not find it on my laptop. I am using Windows 7.

  Read the article

• Lenovo tools for windows 7: can't re-enable wireless

  - by pcampbell

  Consider a netbook - Lenovo S10e with Windows 7 and the S10 Lenovo power management tools. Machine has factory BIOS. Fn+F5 is the key combo to toggle the wireless radio on/off. The tool allows the disabling fine; works as expected. The problem is that the re-enable doesn't work, or is confusing on how to re-enable. Previously tried without success: Fn-F5 Fn-Ctrl-F5 Fn-Shift-F5 Fn-Alt-F5 Here's the onscreen display: Question: How can you re-enable the wireless radio using the Function key on a Lenovo netbook?

  Read the article

• Computer crashes twice/thrice before booting into windows

  - by Adil Malik

  I need help. i built a PC, and it behaves very strangely. When i press the power button, the lights come on, fan maxes out, HDD spins, bios shows up etc and then it immediately crashes (powers down) before booting into windows. Then it powers on automatically and this time boots correctly. Sometimes there is just one failed boot and sometimes it takes 2 such boots to correctly start the computer. This unexpected shutdown never happens once it has booted in windows, just between the windows logo and bios menu. Any ideas?

  Read the article

• How to step down voltage from 208V to 110V

  - by Eric Dennis

  I have some racks that will be fed by 208V/20A circuits. These circuits will be conditioned and battery-backed by the facility in which these racks will live. 99% of the devices in the rack will be able to support 208V input, so I plan to use these PDUs. However, there may be one or two odd devices that will need 110V input. I know that I can use a step-down transformer to provide 110V for these devices, but that seems like overkill for such a small number of devices, plus I don't want to pay extra for the UPS functionality since my power will already be battery-backed. Any suggestions for something I can use for these one-off 110V devices?

  Read the article

• What is this thing called?

  - by Portman

  (Original title: "WTF is this thing called?") I have a couple of networking components in my rack that take giant AC adapters ("power bricks") that don't fit neatly into my rackmount PDU. I have one "thingy" that is shown below, and I need to buy a few more. But I have no idea what I'm searching for because I don't know what the "thingy" is called. Yes, this drawing is terrible. I would ask my 4-year-old to draw it for me because she's a better artist, but she's taking a nap.

  Read the article

• windows 8 on macbook locks after 2 mins despite high performance settings

  - by Mark

  I am running my Macbook Prop as a Windows 8 machine using bootcamp and for some reason, when I leave the keyboard/mouse alone for 2 mins it locks the PC (i.e. goes to the lock screen). I have (of course) checked the power settings and I can assure you that it is not set to these settings. I did notice that when I added my work's Mail Account the computer asked me to accept some group policy settings, which I did, so I suspect that this is a group policy setting, but I cannot find it. Can someone help? P.S. I have searched these forums first, and this is different to the PC going to sleep once locked, this is locking while logged in after 2 mins. Thanks.

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >